Andrew Morton [Wed, 11 Oct 2006 08:22:13 +0000 (01:22 -0700)]
[PATCH] dell_rbu: printk() warning fix
drivers/firmware/dell_rbu.c: In function 'packetize_data':
drivers/firmware/dell_rbu.c:252: warning: format '%lu' expects type 'long unsigned int', but argument 3 has type 'int'
Cc: Matt Domsch <Matt_Domsch@dell.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Randy Dunlap [Wed, 11 Oct 2006 08:22:12 +0000 (01:22 -0700)]
[PATCH] kernel-doc: make parameter description indentation uniform
- In parameter descriptions, strip all whitespace between the parameter
name (e.g., @len) and its description so that the description is
indented uniformly in text and man page modes. Previously, spaces
or tabs (which are used for cleaner source code viewing) affected
the produced output in a negative way.
Before (man mode):
to Destination address, in user space.
from Source address, in kernel space.
n Number of bytes to copy.
After (man mode):
to Destination address, in user space.
from Source address, in kernel space.
n Number of bytes to copy.
- Fix/clarify a few function description comments.
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Ingo Molnar [Wed, 11 Oct 2006 08:22:08 +0000 (01:22 -0700)]
[PATCH] lockdep: fix printk recursion logic
Bug reported and fixed by Tilman Schmidt <tilman@imap.cc>: if lockdep is
enabled then log messages make it to /var/log/messages belatedly. The
reason is a missed wakeup of klogd.
Initially there was only a lockdep_internal() protection against lockdep
recursion within vprintk() - it grew the 'outer' lockdep_off()/on()
protection only later on. But that lockdep_off() made the
release_console_sem() within vprintk() always happen under the
lockdep_internal() condition, causing the bug.
The right solution to remove the inner protection against recursion here -
the outer one is enough.
+ '.' acquired while irqs enabled
+ '+' acquired in irq context
+ '-' acquired in process context with irqs disabled
+ '?' read-acquired both with irqs enabled and in irq context
+
But the get_usage_chars() function does this for '-'
if (class->usage_mask & LOCKF_ENABLED_HARDIRQS)
*c1 = '-';
So i guess what would be correct would be
'.' acquired while irqs disabled
'+' acquired in irq context
'-' acquired with irqs enabled
'?' read acquired in irq context with irqs enabled.
Adrian Bunk [Wed, 11 Oct 2006 08:22:04 +0000 (01:22 -0700)]
[PATCH] HT_IRQ must depend on PCI
CONFIG_PCI=n, CONFIG_HT_IRQ=y results in the following compile error:
...
LD vmlinux
arch/i386/mach-generic/built-in.o: In function `apicid_to_node':
summit.c:(.text+0x53): undefined reference to `apicid_2_node'
arch/i386/kernel/built-in.o: In function `arch_setup_ht_irq':
(.text+0xcf79): undefined reference to `write_ht_irq_low'
arch/i386/kernel/built-in.o: In function `arch_setup_ht_irq':
(.text+0xcf85): undefined reference to `write_ht_irq_high'
arch/i386/kernel/built-in.o: In function `k7nops':
alternative.c:(.data+0x1358): undefined reference to `mask_ht_irq'
alternative.c:(.data+0x1360): undefined reference to `unmask_ht_irq'
make[1]: *** [vmlinux] Error 1
Bug report by Jesper Juhl.
Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Matthew Wilcox [Wed, 11 Oct 2006 08:22:02 +0000 (01:22 -0700)]
[PATCH] Consolidate check_signature
There's nothing arch-specific about check_signature(), so move it to
<linux/io.h>. Use a cross between the Alpha and i386 implementations as
the generic one.
Signed-off-by: Matthew Wilcox <willy@parisc-linux.org> Acked-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Trond Myklebust [Wed, 11 Oct 2006 08:21:58 +0000 (01:21 -0700)]
[PATCH] VM: Fix the gfp_mask in invalidate_complete_page2
If try_to_release_page() is called with a zero gfp mask, then the
filesystem is effectively denied the possibility of sleeping while
attempting to release the page. There doesn't appear to be any valid
reason why this should be banned, given that we're not calling this from a
memory allocation context.
For this reason, change the gfp_mask argument of the call to GFP_KERNEL.
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Steve Dickson <SteveD@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Reinette Chatre [Wed, 11 Oct 2006 08:21:55 +0000 (01:21 -0700)]
[PATCH] bitmap: parse input from kernel and user buffers
lib/bitmap.c:bitmap_parse() is a library function that received as input a
user buffer. This seemed to have originated from the way the write_proc
function of the /proc filesystem operates.
This has been reworked to not use kmalloc and eliminates a lot of
get_user() overhead by performing one access_ok before using __get_user().
We need to test if we are in kernel or user space (is_user) and access the
buffer differently. We cannot use __get_user() to access kernel addresses
in all cases, for example in architectures with separate address space for
kernel and user.
This function will be useful for other uses as well; for example, taking
input for /sysfs instead of /proc, so it was changed to accept kernel
buffers. We have this use for the Linux UWB project, as part as the
upcoming bandwidth allocator code.
Only a few routines used this function and they were changed too.
Signed-off-by: Reinette Chatre <reinette.chatre@linux.intel.com> Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com> Cc: Paul Jackson <pj@sgi.com> Cc: Joe Korty <joe.korty@ccur.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andrew Morton [Wed, 11 Oct 2006 08:21:53 +0000 (01:21 -0700)]
[PATCH] invalidate_inode_pages2_range() debug
A failure in invalidate_inode_pages2_range() can result in unpleasant things
happening in NFS (at least). Stick a WARN_ON_ONCE() in there so we can find
out if it happens, and maybe why.
(akpm: might be a -mm-only patch, we'll see..)
Cc: Chuck Lever <chuck.lever@oracle.com> Cc: Trond Myklebust <Trond.Myklebust@netapp.com> Cc: Steve Dickson <SteveD@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Nick Piggin [Wed, 11 Oct 2006 08:21:52 +0000 (01:21 -0700)]
[PATCH] sched: likely profiling
This likely profiling is pretty fun. I found a few possible problems
in sched.c.
This patch may be not measurable, but when I did measure long ago,
nooping (un)likely cost a couple of % on scheduler heavy benchmarks, so
it all adds up.
Tweak some branch hints:
- the 2nd 64 bits in the bitmask is likely to be populated, because it
contains the first 28 bits (nearly 3/4) of the normal priorities.
(ratio of 669669:691 ~= 1000:1).
- it isn't unlikely that context switching switches to another process. it
might be very rapidly switching to and from the idle process (ratio of
475815:419004 and 471330:423544). Let the branch predictor decide.
- preempt_enable seems to be very often called in a nested preempt_disable
or with interrupts disabled (ratio of 3567760:87965 ~= 40:1)
Signed-off-by: Nick Piggin <npiggin@suse.de> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Daniel Walker <dwalker@mvista.com> Cc: Hua Zhong <hzhong@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Jeff Garzik [Wed, 11 Oct 2006 08:21:51 +0000 (01:21 -0700)]
[PATCH] tpm: fix error handling
- handle sysfs error
- handle driver model errors
- de-obfuscate platform_device_register_simple() call, which included an
assignment in between two function calls, in the same C statement.
Signed-off-by: Jeff Garzik <jeff@garzik.org> Acked-by: Kylene Hall <kjhall@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Define the behaviour when an error is encountered. (Either ignore
errors and just mark the file system erroneous and continue, or remount
the file system read-only, or panic and halt the system.) The default is
set in the filesystem superblock, and can be changed using tune2fs(8).
---- end of quote ----
However EXT3_ERRORS_CONTINUE is not read from the superblock, and thus
ERRORS_CONT is not saved on the sbi->s_mount_opt. It leads to the incorrect
handle of errors on ext3.
Then we've checked corresponding code in ext2 and discovered that it is buggy
as well:
- EXT2_ERRORS_CONTINUE is not read from the superblock (the same);
- parse_option() does not clean the alternative values and thus something
like (ERRORS_CONT|ERRORS_RO) can be set;
- if options are omitted, parse_option() does not set any of these options.
Therefore it is possible to set any combination of these options on the ext2:
- none of them may be set: EXT2_ERRORS_CONTINUE on superblock / empty mount
options;
- any of them may be set using mount options;
- 2 any options may be set: by using EXT2_ERRORS_RO/EXT2_ERRORS_PANIC on the
superblock and other value in mount options;
- and finally all three options may be set by adding third option in remount.
Currently ext2 uses these values only in ext2_error() and it is not leading to
any noticeable troubles. However somebody may be discouraged when he will try
to workaround EXT2_ERRORS_PANIC on the superblock by using errors=continue in
mount options.
This patch:
EXT2_ERRORS_CONTINUE should be read from the superblock as default value for
error behaviour. parse_option() should clean the alternative options and
should not change default value taken from the superblock.
Define the behaviour when an error is encountered. (Either ignore
errors and just mark the file system erroneous and continue, or remount
the file system read-only, or panic and halt the system.) The default is
set in the filesystem superblock, and can be changed using tune2fs(8).
---- end of quote ----
However EXT3_ERRORS_CONTINUE is not read from the superblock, and thus
ERRORS_CONT is not saved on the sbi->s_mount_opt. It leads to the incorrect
handle of errors on ext3.
Then we've checked corresponding code in ext2 and discovered that it is buggy
as well:
- EXT2_ERRORS_CONTINUE is not read from the superblock (the same);
- parse_option() does not clean the alternative values and thus something
like (ERRORS_CONT|ERRORS_RO) can be set;
- if options are omitted, parse_option() does not set any of these options.
Therefore it is possible to set any combination of these options on the ext2:
- none of them may be set: EXT2_ERRORS_CONTINUE on superblock / empty mount
options;
- any of them may be set using mount options;
- 2 any options may be set: by using EXT2_ERRORS_RO/EXT2_ERRORS_PANIC on the
superblock and other value in mount options;
- and finally all three options may be set by adding third option in remount.
Currently ext2 uses these values only in ext2_error() and it is not leading to
any noticeable troubles. However somebody may be discouraged when he will try
to workaround EXT2_ERRORS_PANIC on the superblock by using errors=continue in
mount options.
This patch:
EXT3_ERRORS_CONTINUE should be taken from the superblock as default value for
error behaviour.
Florin Malita [Wed, 11 Oct 2006 08:21:48 +0000 (01:21 -0700)]
[PATCH] fix Module taint flags listing in Oops/panic
Module taint flags listing in Oops/panic has a couple of issues:
* taint_flags() doesn't null-terminate the buffer after printing the flags
* per-module taints are only set if the kernel is not already tainted
(with that particular flag) => only the first offending module gets its
taint info correctly updated
Some additional changes:
* 'license_gplok' is no longer needed - equivalent to !(taints &
TAINT_PROPRIETARY_MODULE) - so we can drop it from struct module *
exporting module taint info via /proc/module:
pwc 88576 0 - Live 0xf8c32000
evilmod 6784 1 pwc, Live 0xf8bbf000 (PF)
Andrew Morton [Wed, 11 Oct 2006 08:21:46 +0000 (01:21 -0700)]
[PATCH] grow_buffers() infinite loop fix
If grow_buffers() is for some reason passed a block number which wants to lie
outside the maximum-addressable pagecache range (PAGE_SIZE * 4G bytes) then it
will accidentally truncate `index' and will then instnatiate a page at the
wrong pagecache offset. This causes __getblk_slow() to go into an infinite
loop.
This can happen with corrupted disks, or with software errors elsewhere.
Detect that, and handle it.
Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Stephane Eranian [Wed, 11 Oct 2006 08:21:45 +0000 (01:21 -0700)]
[PATCH] Add carta_random32() library routine
This is a follow-up patch based on the review for perfmon2. This patch
adds the carta_random32() library routine + carta_random32.h header file.
This is fast, simple, and efficient pseudo number generator algorithm. We
use it in perfmon2 to randomize the sampling periods. In this context, we
do not need any fancy randomizer.
Signed-off-by: stephane eranian <eranian@hpl.hp.com> Cc: David Mosberger <david.mosberger@acm.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Davide Libenzi [Wed, 11 Oct 2006 08:21:44 +0000 (01:21 -0700)]
[PATCH] epoll_pwait()
Implement the epoll_pwait system call, that extend the event wait mechanism
with the same logic ppoll and pselect do. The definition of epoll_pwait
is:
int epoll_pwait(int epfd, struct epoll_event *events, int maxevents,
int timeout, const sigset_t *sigmask, size_t sigsetsize);
The difference between the vanilla epoll_wait and epoll_pwait is that the
latter allows the caller to specify a signal mask to be set while waiting
for events. Hence epoll_pwait will wait until either one monitored event,
or an unmasked signal happen. If sigmask is NULL, the epoll_pwait system
call will act exactly like epoll_wait. For the POSIX definition of
pselect, information is available here:
David Woodhouse [Wed, 11 Oct 2006 08:21:43 +0000 (01:21 -0700)]
[PATCH] Add CONFIG_HEADERS_CHECK option to automatically run 'make headers_check'
In order to encourage people to notice when they break the exported
headers, add a config option which automatically runs the sanity checks
when building vmlinux. That way, those who use allyesconfig will notice
failures.
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] uml: allow finer tuning for host VMSPLIT setting
Now that various memory splits are enabled, add a config option allowing the
user to compile UML for its need - HOST_2G_2G allowed to choose either 3G/1G
or 2G/2G, and enabling it reduced the usable virtual memory.
Detecting this at run time should be implemented in the future, but we must
make the stop-gap measure work well enough (this is valid in _many_ cases).
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Deprecate TT mode in Kconfig so that users won't select it, update the
MODE_SKAS description (it was largely obsolete and misleadin) and btw describe
advantages for high memory usage with CONFIG_STATIC_LINK.
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The export is together with the definition, in arch/x86_64/lib/csum-partial.c,
which is compiled in by arch/um/sys-x86_64/Makefile.
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Unify macros common to x86 and x86_64 kernel-offsets.h files.
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] uml: allow using again x86/x86_64 crypto code
Enable compilation of x86_64 crypto code;, and add the needed constant to make
the code compile again (that macro was added to i386 asm-offsets between
2.6.17 and 2.6.18, in 6c2bb98bc33ae33c7a33a133a4cd5a06395fece5).
Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] uml: declare in Kconfig our partial LOCKDEP support
Declare UML partial support for LOCKDEP - however IRQFLAGS tracing requires
some coding which nobody did yet, so we cannot run full lockdep on UML. Grep
for CONFIG_TRACE_IRQFLAGS on i386 code to find their implementation.
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
On a 64bit Uml, if run under "setarch i386" (which a user did), uname()
currently returns the obtained i686 as machine - fix that. Btw, I'm quite
surprised that under setarch i386 a 64-bit binary can run.
Cc: Andi Kleen <ak@suse.de> Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] uml: fix processor selection to exclude unsupported processors and features
Makes UML compile on any possible processor choice. The two problems were:
*) x86 code, when 386 is selected, checks at runtime boot_cpuflags, which we do
not have.
*) 3Dnow support for memcpy() et al. does not compile currently and fixing this
is not trivial, so simply disable it; with this change, if one selects MK7
UML compiles (while it did not).
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
If enable is moved by GCC in a register its value may not be preserved after
coming back there with longjmp(). So, mark it as volatile to prevent this;
this is suggested (it seems) in info gcc, when it talks about -Wuninitialized.
I re-read this and it seems to say something different, but I still believe
this may be needed.
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] uml: make TT mode compile after setjmp-related changes
Make TT mode compile after the introduction of klibc's implementation of
setjmp.
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
This was forgot in a previous patch so UML does not compile with TT mode
enabled.
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Correct commit 5906e4171ad61ce68de95e51b773146707671f80 - this makes more
sense: we turn pte_mkexec + pte_wrprotect to pte_mkread. However, due to a
bug in pte_mkread, it does the exact same thing as pte_mkwrite, so this patch
improves the code but does not change anything in practice. The pte_mkread
bug is fixed separately, as it may have big impact.
Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Jeff Dike <jdike@addtoit.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andi Kleen pointed out that -mcmodel=kernel does not make sense for userspace
code and would stop everything from working, and pointed out the correct fix
for the original bug (not easy to do for me).
Nick Piggin [Wed, 11 Oct 2006 08:21:30 +0000 (01:21 -0700)]
[PATCH] mm: arch_free_page fix
After the PG_reserved check was added, arch_free_page was being called in the
wrong place (it could be called for a page we don't actually want to free).
Fix that.
Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Dave Jones [Wed, 11 Oct 2006 08:21:27 +0000 (01:21 -0700)]
[PATCH] move rmap BUG_ON outside DEBUG_VM
We have a persistent dribble of reports of this BUG triggering. Its extended
diagnostics were recently made conditional on CONFIG_DEBUG_VM, which was a bad
idea - we want to know about it.
Signed-off-by: Dave Jones <davej@redhat.com> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Cc: Hugh Dickins <hugh@veritas.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Switch the memory policy of the kevent threads to MPOL_DEFAULT while
leaving the kzalloc of the workqueue structure on interleave. This means
that all code executed in the context of the kevent thread is allocating
node local.
Signed-off-by: Christoph Lameter <clameter@sgi.com> Cc: Christoph Lameter <clameter@sgi.com> Cc: Alok Kataria <alok.kataria@calsoftinc.com> Cc: Andi Kleen <ak@suse.de> Cc: <pj@sgi.com> Cc: <shai@scalex86.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Define the behaviour when an error is encountered. (Either ignore
errors and just mark the file system erroneous and continue, or remount
the file system read-only, or panic and halt the system.) The default is
set in the filesystem superblock, and can be changed using tune2fs(8).
---- end of quote ----
However EXT3_ERRORS_CONTINUE is not read from the superblock, and thus
ERRORS_CONT is not saved on the sbi->s_mount_opt. It leads to the incorrect
handle of errors on ext3.
Then we've checked corresponding code in ext2 and discovered that it is buggy
as well:
- EXT2_ERRORS_CONTINUE is not read from the superblock (the same);
- parse_option() does not clean the alternative values and thus something
like (ERRORS_CONT|ERRORS_RO) can be set;
- if options are omitted, parse_option() does not set any of these options.
Therefore it is possible to set any combination of these options on the ext2:
- none of them may be set: EXT2_ERRORS_CONTINUE on superblock / empty mount
options;
- any of them may be set using mount options;
- 2 any options may be set: by using EXT2_ERRORS_RO/EXT2_ERRORS_PANIC on the
superblock and other value in mount options;
- and finally all three options may be set by adding third option in remount.
Currently ext2 uses these values only in ext2_error() and it is not leading to
any noticeable troubles. However somebody may be discouraged when he will try
to workaround EXT2_ERRORS_PANIC on the superblock by using errors=continue in
mount options.
This patch:
EXT4_ERRORS_CONTINUE should be taken from the superblock as default value for
error behaviour.
Andrew Morton [Wed, 11 Oct 2006 08:21:19 +0000 (01:21 -0700)]
[PATCH] ext4 64 bit divide fix
With CONFIG_LBD=n, sector_div() expands to a plain old divide. But ext4 is
_not_ passing in a sector_t as the first argument, so...
fs/built-in.o: In function `ext4_get_group_no_and_offset':
fs/ext4/balloc.c:39: undefined reference to `__umoddi3'
fs/ext4/balloc.c:41: undefined reference to `__udivdi3'
fs/built-in.o: In function `find_group_orlov':
fs/ext4/ialloc.c:278: undefined reference to `__udivdi3'
fs/built-in.o: In function `ext4_fill_super':
fs/ext4/super.c:1488: undefined reference to `__udivdi3'
fs/ext4/super.c:1488: undefined reference to `__umoddi3'
fs/ext4/super.c:1594: undefined reference to `__udivdi3'
fs/ext4/super.c:1601: undefined reference to `__umoddi3'
Fix that up by calling do_div() directly.
Also cast the arg to u64. do_div() is only defined on u64, and ext4_fsblk_t
is supposed to be opaque.
Note especially the changes to find_group_orlov(). It was attempting to do
do_div(int, unsigned long long);
which is royally screwed up. Switched it to plain old divide.
Cc: <linux-ext4@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Mingming Cao [Wed, 11 Oct 2006 08:21:13 +0000 (01:21 -0700)]
[PATCH] ext4: removesector_t bits check
Previously when in-kernel ext4 block type is sector_t, it's only 4 bits long
under some 32bit arch (when CONFIG_LBD is not on). So we need to check the
size of sector_t before we read 48bit long on-disk blocks to in-kernel blocks.
These checks are unnecessary now as we changed the in-kernel blocks to
unsigned longlong.
Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Badari Pulavarty [Wed, 11 Oct 2006 08:21:09 +0000 (01:21 -0700)]
[PATCH] ext4: 48bit i_file_acl
As we are planning to support 48-bit block numbers for ext4, we need to
support 48-bit block numbers for extended attributes. In the short term, we
can do this by reuse (on-disk) 16-bit padding (linux2.i_pad1 currently used
only by "hurd") as high order bits for xattr. This patch basically does that.
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Zach Brown [Wed, 11 Oct 2006 08:21:08 +0000 (01:21 -0700)]
[PATCH] 64-bit jbd2 core
Here is the patch to JBD to handle 64 bit block numbers, originally from Zach
Brown. This patch is useful only after adding support for 64-bit block
numbers in the filesystem.
Signed-off-by: Badari Pulavarty <pbadari@us.ibm.com> Signed-off-by: Zach Brown <zach.brown@oracle.com> Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Make it possible to add file preallocation support in future as an RO_COMPAT
feature by recognizing uninitialized extents as holes and limiting extent
length to keep the top bit of ee_len free for marking uninitialized extents.
Signed-off-by: Suparna Bhattacharya <suparna@in.ibm.com> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Alex Tomas [Wed, 11 Oct 2006 08:21:05 +0000 (01:21 -0700)]
[PATCH] ext4: 48bit physical block number support in extents
Signed-off-by: Alex Tomas <alex@clusterfs.com> Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Alex Tomas [Wed, 11 Oct 2006 08:21:03 +0000 (01:21 -0700)]
[PATCH] ext3: add extent map support
On disk extents format:
/*
* this is extent on-disk structure
* it's used at the bottom of the tree
*/
struct ext3_extent {
__le32 ee_block; /* first logical block extent covers */
__le16 ee_len; /* number of blocks covered by extent */
__le16 ee_start_hi; /* high 16 bits of physical block */
__le32 ee_start; /* low 32 bigs of physical block */
};
Signed-off-by: Alex Tomas <alex@clusterfs.com> Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Mingming Cao [Wed, 11 Oct 2006 08:21:01 +0000 (01:21 -0700)]
[PATCH] jbd2: enable building of jbd2 and have ext4 use it rather than jbd
Reworked from a patch by Mingming Cao and Randy Dunlap
Signed-off-By: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Mingming Cao <cmm@us.ibm.com> Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Chen, Kenneth W [Wed, 11 Oct 2006 08:20:46 +0000 (01:20 -0700)]
[PATCH] hugetlb: fix linked list corruption in unmap_hugepage_range()
commit fe1668ae5bf0145014c71797febd9ad5670d5d05 causes kernel to oops with
libhugetlbfs test suite. The problem is that hugetlb pages can be shared
by multiple mappings. Multiple threads can fight over page->lru in the
unmap path and bad things happen. We now serialize __unmap_hugepage_range
to void concurrent linked list manipulation. Such serialization is also
needed for shared page table page on hugetlb area. This patch will fixed
the bug and also serve as a prepatch for shared page table.
Signed-off-by: Ken Chen <kenneth.w.chen@intel.com> Cc: Hugh Dickins <hugh@veritas.com> Cc: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Add suspend_console() and resume_console() to the suspend-to-disk code paths
so that the users of netconsole can use swsusp with it.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Heiko Carstens [Wed, 11 Oct 2006 08:20:44 +0000 (01:20 -0700)]
[PATCH] Disable DETECT_SOFTLOCKUP for s390
We got several false bug reports because of enabled
CONFIG_DETECT_SOFTLOCKUP. Disable soft lockup detection on s390, since it
doesn't work on a virtualized architecture.
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Luca Tettamanti [Wed, 11 Oct 2006 08:20:41 +0000 (01:20 -0700)]
[PATCH] Fix menuconfig build failure due to missing stdbool.h
scripts/kconfig/lxdialog/util.c fails to build because it uses
true/false without including stdbool.h:
kronos:~/src/linux-2.6$ make O=../linux-build-git menuconfig
GEN /home/kronos/src/linux-build/Makefile
HOSTCC scripts/kconfig/lxdialog/util.o
/home/kronos/src/linux-2.6/scripts/kconfig/lxdialog/util.c: In function 'set_classic_theme':
/home/kronos/src/linux-2.6/scripts/kconfig/lxdialog/util.c:68: error: 'true' undeclared (first use in this function)
/home/kronos/src/linux-2.6/scripts/kconfig/lxdialog/util.c:68: error: (Each undeclared identifier is reported only once
/home/kronos/src/linux-2.6/scripts/kconfig/lxdialog/util.c:68: error: for each function it appears in.)
/home/kronos/src/linux-2.6/scripts/kconfig/lxdialog/util.c:70: error: 'false' undeclared (first use in this function)
/home/kronos/src/linux-2.6/scripts/kconfig/lxdialog/util.c: In function 'set_blackbg_theme':
/home/kronos/src/linux-2.6/scripts/kconfig/lxdialog/util.c:101: error: 'true' undeclared (first use in this function)
/home/kronos/src/linux-2.6/scripts/kconfig/lxdialog/util.c:102: error: 'false' undeclared (first use in this function)
/home/kronos/src/linux-2.6/scripts/kconfig/lxdialog/util.c: In function 'set_bluetitle_theme':
/home/kronos/src/linux-2.6/scripts/kconfig/lxdialog/util.c:144: error: 'true' undeclared (first use in this function)
make[2]: *** [scripts/kconfig/lxdialog/util.o] Error 1
make[1]: *** [menuconfig] Error 2
make: *** [menuconfig] Error 2
Add <stdbool.h> to dialog.h to fix the breakage.
Signed-off-by: Luca Tettamanti <kronos.it@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Mel Gorman [Wed, 11 Oct 2006 08:20:40 +0000 (01:20 -0700)]
[PATCH] mm: remove memmap_zone_idx()
memmap_zone_idx() is not used anymore. It was required by an earlier
version of
account-for-memmap-and-optionally-the-kernel-image-as-holes.patch but not
any more.
Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Mel Gorman [Wed, 11 Oct 2006 08:20:39 +0000 (01:20 -0700)]
[PATCH] mm: use symbolic names instead of indices for zone initialisation
Arch-independent zone-sizing is using indices instead of symbolic names to
offset within an array related to zones (max_zone_pfns). The unintended
impact is that ZONE_DMA and ZONE_NORMAL is initialised on powerpc instead
of ZONE_DMA and ZONE_HIGHMEM when CONFIG_HIGHMEM is set. As a result, the
the machine fails to boot but will boot with CONFIG_HIGHMEM turned off.
The following patch properly initialises the max_zone_pfns[] array and uses
symbolic names instead of indices in each architecture using
arch-independent zone-sizing. Two users have successfully booted their
powerpcs with it (one an ibook G4). It has also been boot tested on x86,
x86_64, ppc64 and ia64. Please merge for 2.6.19-rc2.
Credit to Benjamin Herrenschmidt for identifying the bug and rolling the
first fix. Additional credit to Johannes Berg and Andreas Schwab for
reporting the problem and testing on powerpc.
Signed-off-by: Mel Gorman <mel@csn.ul.ie> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Linus Torvalds [Wed, 11 Oct 2006 00:14:44 +0000 (17:14 -0700)]
ACPI: Allow setting SCI_EN bit in PM1_CONTROL register
This is needed by at least the Mac Mini's, which (incorrectly) come back
from suspend with SCI_EN clear.
Thanks to Frédéric Riss for hunting this down.
Acked-by: Frédéric Riss <frederic.riss@gmail.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: Len Brown <len.brown@intel.com> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Jeff Garzik [Tue, 10 Oct 2006 06:58:14 +0000 (02:58 -0400)]
[PATCH] firmware/dcdbas: fix bug in error cleanup
The error path path mistakenly called sysfs_create_group() rather than
sysfs_remove_group(). They take the same arguments, so it's easy to
cut-n-paste such a bug.
Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Jeff Garzik [Tue, 10 Oct 2006 05:40:55 +0000 (01:40 -0400)]
[PATCH] irda: donauboe fixes, cleanups
- fix: toshoboe_invalid_dev() was recently removed, but not all callers
were updated, causing the obvious linker error. Remove caller,
because the check (like the one removed) isn't used.
- fix: propagate request_irq() return value
- cleanup: remove void* casts
- cleanup: remove impossible ASSERTs
Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Alexey Dobriyan [Wed, 28 Dec 2005 19:27:10 +0000 (22:27 +0300)]
[PATCH] Finish annotations of struct vlan_ethhdr
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
projects / linux-beck.git / log