Colin Ian King [Mon, 6 Jun 2016 08:21:44 +0000 (09:21 +0100)]
net: fec: fix spelling mistakes and add missing newline
trivial fix to spelling mistakes and add missing newline in pr_err
messages
Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Mon, 6 Jun 2016 06:37:16 +0000 (02:37 -0400)]
bnxt_en: Simplify VLAN receive logic.
Since both CTAG and STAG rx acceleration must be enabled together, we
only need to check one feature flag (NETIF_F_HW_VLAN_CTAG_RX) before
calling __vlan_hwaccel_put_tag().
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Mon, 6 Jun 2016 06:37:15 +0000 (02:37 -0400)]
bnxt_en: Enable and disable RX CTAG and RX STAG VLAN acceleration together.
The hardware can only be set to strip or not strip both the VLAN CTAG and
STAG. It cannot strip one and not strip the other. Add logic to
bnxt_fix_features() to toggle both feature flags when the user is toggling
one of them.
Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Mon, 6 Jun 2016 06:37:14 +0000 (02:37 -0400)]
bnxt_en: Fix tx push race condition.
Set the is_push flag in the software BD before the tx data is pushed to
the chip. It is possible to get the tx interrupt as soon as the tx data
is pushed. The tx handler will not handle the event properly if the
is_push flag is not set and it will crash.
Signed-off-by: Michael Chan <michael.chan@broadocm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This three part patchset fixes bugs in synchronization between
rds_tcp_accept_one() and the rds-tcp send/recv path.
Patch 1 ensures that the lock_sock() is taken appropriately
and the RDS datagram reassembly state is reset to synchronize
with the receive path.
Patch 2 ensures that partially sent RDS datagrams will get
retransmitted after rds_tcp_accept_one() switches sockets.
Patch 3 fixes a race window which would prematurely re-enable
rds_send_xmit() before the rds_tcp_connection setup has been
completed in rds_tcp_accept_one().
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
RDS: TCP: fix race windows in send-path quiescence by rds_tcp_accept_one()
The send path needs to be quiesced before resetting callbacks from
rds_tcp_accept_one(), and commit eb192840266f ("RDS:TCP: Synchronize
rds_tcp_accept_one with rds_send_xmit when resetting t_sock") achieves
this using the c_state and RDS_IN_XMIT bit following the pattern
used by rds_conn_shutdown(). However this leaves the possibility
of a race window as shown in the sequence below
take t_conn_lock in rds_tcp_conn_connect
send outgoing syn to peer
drop t_conn_lock in rds_tcp_conn_connect
incoming from peer triggers rds_tcp_accept_one, conn is
marked CONNECTING
wait for RDS_IN_XMIT to quiesce any rds_send_xmit threads
call rds_tcp_reset_callbacks
[.. race-window where incoming syn-ack can cause the conn
to be marked UP from rds_tcp_state_change ..]
lock_sock called from rds_tcp_reset_callbacks, and we set
t_sock to null
As soon as the conn is marked UP in the race-window above, rds_send_xmit()
threads will proceed to rds_tcp_xmit and may encounter a null-pointer
deref on the t_sock.
Given that rds_tcp_state_change() is invoked in softirq context, whereas
rds_tcp_reset_callbacks() is in workq context, and testing for RDS_IN_XMIT
after lock_sock could result in a deadlock with tcp_sendmsg, this
commit fixes the race by using a new c_state, RDS_TCP_RESETTING, which
will prevent a transition to RDS_CONN_UP from rds_tcp_state_change().
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
RDS: TCP: Retransmit half-sent datagrams when switching sockets in rds_tcp_reset_callbacks
When we switch a connection's sockets in rds_tcp_rest_callbacks,
any partially sent datagram must be retransmitted on the new
socket so that the receiver can correctly reassmble the RDS
datagram. Use rds_send_reset() which is designed for this purpose.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
RDS: TCP: Add/use rds_tcp_reset_callbacks to reset tcp socket safely
When rds_tcp_accept_one() has to replace the existing tcp socket
with a newer tcp socket (duelling-syn resolution), it must lock_sock()
to suppress the rds_tcp_data_recv() path while callbacks are being
changed. Also, existing RDS datagram reassembly state must be reset,
so that the next datagram on the new socket does not have corrupted
state. Similarly when resetting the newly accepted socket, appropriate
locks and synchronization is needed.
This commit ensures correct synchronization by invoking
kernel_sock_shutdown to reset a newly accepted sock, and by taking
appropriate lock_sock()s (for old and new sockets) when resetting
existing callbacks.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Sat, 4 Jun 2016 19:55:13 +0000 (12:55 -0700)]
fq_codel: fix NET_XMIT_CN behavior
My prior attempt to fix the backlogs of parents failed.
If we return NET_XMIT_CN, our parents wont increase their backlog,
so our qdisc_tree_reduce_backlog() should take this into account.
v2: Florian Westphal pointed out that we could drop the packet,
so we need to save qdisc_pkt_len(skb) in a temp variable before
calling fq_codel_drop()
Fixes: 9d18562a2278 ("fq_codel: add batch ability to fq_codel_drop()") Fixes: 2ccccf5fb43f ("net_sched: update hierarchical backlog too") Reported-by: Stas Nichiporovich <stasn77@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: WANG Cong <xiyou.wangcong@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Jamal Hadi Salim <jhs@mojatatu.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Sat, 4 Jun 2016 18:50:59 +0000 (20:50 +0200)]
bpf, trace: use READ_ONCE for retrieving file ptr
In bpf_perf_event_read() and bpf_perf_event_output(), we must use
READ_ONCE() for fetching the struct file pointer, which could get
updated concurrently, so we must prevent the compiler from potential
refetching.
We already do this with tail calls for fetching the related bpf_prog,
but not so on stored perf events. Semantics for both are the same
with regards to updates.
Fixes: a43eec304259 ("bpf: introduce bpf_perf_event_output() helper") Fixes: 35578d798400 ("bpf: Implement function bpf_perf_event_read() that get the selected hardware PMU conuter") Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
WANG Cong [Fri, 3 Jun 2016 22:05:57 +0000 (15:05 -0700)]
net_sched: keep backlog updated with qlen
For gso_skb we only update qlen, backlog should be updated too.
Note, it is correct to just update these stats at one layer,
because the gso_skb is cached there.
Reported-by: Stas Nichiporovich <stasn77@gmail.com> Fixes: 2ccccf5fb43f ("net_sched: update hierarchical backlog too") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Schmidt [Fri, 3 Jun 2016 13:32:18 +0000 (15:32 +0200)]
bnx2x: allow adding VLANs while interface is down
Since implementing VLAN filtering in commit 05cc5a39ddb74
("bnx2x: add vlan filtering offload") bnx2x refuses to add a VLAN while
the interface is down:
# ip link add link enp3s0f0 enp3s0f0_10 type vlan id 10
RTNETLINK answers: Bad address
and in dmesg (with bnx2x.debug=0x20):
bnx2x: [bnx2x_vlan_rx_add_vid:12941(enp3s0f0)]Ignoring VLAN
configuration the interface is down
Other drivers have no problem with this.
Fix this peculiar behavior in the following way:
- Accept requests to add/kill VID regardless of the device state.
Maintain the requested list of VIDs in the bp->vlan_reg list.
- If the device is up, try to configure the VID list into the hardware.
If we run out of VLAN credits or encounter a failure configuring an
entry, fall back to accepting all VLANs.
If we successfully configure all entries from the list, turn the
fallback off.
- Use the same code for reconfiguring VLANs during NIC load.
Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Acked-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
MAINTAINERS: Add file patterns for wireless device tree bindings
Submitters of device tree binding documentation may forget to CC
the subsystem maintainer if this is missing.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Kalle Valo <kvalo@codeaurora.org> Cc: linux-wireless@vger.kernel.org Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
David S. Miller [Fri, 3 Jun 2016 23:54:23 +0000 (19:54 -0400)]
Merge branch 'mediatek-fixes'
John Crispin says:
====================
net-next: mediatek: improve phy support
The current driver did not handle the RGMII delay modes and asymmetric flow
control properly. The mii_bus is not freed properly. Also add support for
fixed-phy allowing the driver to work on SoCs that have an internal gigabit
switch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
John Crispin [Fri, 3 Jun 2016 08:17:09 +0000 (10:17 +0200)]
net-next: mediatek: properly handle RGMII modes
If an external Gigabit PHY is connected to either of the MACs we need to
be able to tell the PHY to use a delay. Not doing so will result in heavy
packet loss and/or data corruption when using PHYs such as the IC+ IP1001.
We tell the PHY which MII delay mode to use via the devictree.
The ethernet driver needs to be adapted to handle all 3 rgmii-*id modes
in the same way as normal rgmii when setting up the MAC.
Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
John Crispin [Fri, 3 Jun 2016 08:17:08 +0000 (10:17 +0200)]
net-next: mediatek: add fixed-phy support
The MT7623 SoC has a builtin gigabit switch. If we want to use it, GMAC1
needs to be configured using a fixed link speed and flow control settings.
The easiest way to do this is to used the fixed-phy driver, allowing us to
reuse the existing mdio polling code to setup the MAC.
Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
John Crispin [Fri, 3 Jun 2016 08:17:07 +0000 (10:17 +0200)]
net-next: mediatek: fix gigabit and flow control advertisement
The current code will not setup the PHYs advertisement features correctly.
Fix this and properly advertise Gigabit features and properly handle
asymmetric pause frames.
Signed-off-by: Sean Wang <keyhaede@gmail.com> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
John Crispin [Fri, 3 Jun 2016 08:17:06 +0000 (10:17 +0200)]
net-next: mediatek: use mdiobus_free() in favour of kfree()
The driver currently uses kfree() to clear the mii_bus. This is not the
correct way to clear the memory and mdiobus_free() should be used instead.
This patch fixes the two instances where this happens in the driver.
Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: David S. Miller <davem@davemloft.net>
The rx-usecs shouldn't be changed while interface down/up.
Currently, for instance, if it's set to 100us, after interface
down/up it's 500us. It's a hidden bug that can lead to lavish
interrupt pacing time increasing while "down/up" up to max value.
Steps to reproduce:
- set rx-usecs to be 100us
- down/up interface
- read new unexpected rx-usecs
Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@linaro.org> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Yangbo Lu [Thu, 2 Jun 2016 09:36:28 +0000 (17:36 +0800)]
gianfar: fix the last transmit buffer descriptor
When the transmit hardware timestamping is enabled, an additional
TxBD would be added and would be set as the last TxBD with TXBD_LAST
and TXBD_INTERRUPT. However this has been broken by a patch recently.
This made the software couldn't get transmit hardware timestamps and
resulted in call trace. So, this patch is to fix this issue.
Fixes: 48963b4492e9 ("gianfar: Remove redundant ops for do_tstamp
from xmit()") Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Reviewed-by: Claudiu Manoil <claudiu.manoil@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
WANG Cong [Wed, 1 Jun 2016 23:15:19 +0000 (16:15 -0700)]
sch_tbf: update backlog as well
Fixes: 2ccccf5fb43f ("net_sched: update hierarchical backlog too") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
WANG Cong [Wed, 1 Jun 2016 23:15:18 +0000 (16:15 -0700)]
sch_red: update backlog as well
Fixes: 2ccccf5fb43f ("net_sched: update hierarchical backlog too") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
WANG Cong [Wed, 1 Jun 2016 23:15:17 +0000 (16:15 -0700)]
sch_drr: update backlog as well
Fixes: 2ccccf5fb43f ("net_sched: update hierarchical backlog too") Cc: Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Franky Lin [Thu, 2 Jun 2016 09:00:27 +0000 (02:00 -0700)]
brcmfmac: add eth_type_trans back for PCIe full dongle
A regression was introduced in commit 9c349892ccc9 ("brcmfmac: revise
handling events in receive path") which moves eth_type_trans() call
to brcmf_rx_frame(). Msgbuf layer doesn't use brcmf_rx_frame() but invokes
brcmf_netif_rx() directly. In such case the Ethernet header was not
stripped out resulting in null pointer dereference in the networking
stack.
Kangjie Lu [Thu, 2 Jun 2016 08:11:20 +0000 (04:11 -0400)]
rds: fix an infoleak in rds_inc_info_copy
The last field "flags" of object "minfo" is not initialized.
Copying this object out may leak kernel stack data.
Assign 0 to it to avoid leak.
Signed-off-by: Kangjie Lu <kjlu@gatech.edu> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Thu, 2 Jun 2016 21:52:43 +0000 (14:52 -0700)]
Possible problem with e6afc8ac ("udp: remove headers from UDP packets before queueing")
Paul Moore tracked a regression caused by a recent commit, which
mistakenly assumed that sk_filter() could be avoided if socket
had no current BPF filter.
The intent was to avoid udp_lib_checksum_complete() overhead.
But sk_filter() also checks skb_pfmemalloc() and
security_sock_rcv_skb(), so better call it.
Fixes: e6afc8ace6dd ("udp: remove headers from UDP packets before queueing") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Paul Moore <paul@paul-moore.com> Tested-by: Paul Moore <paul@paul-moore.com> Tested-by: Stephen Smalley <sds@tycho.nsa.gov> Cc: samanthakumar <samanthakumar@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vincent Palatin [Wed, 1 Jun 2016 15:53:48 +0000 (08:53 -0700)]
stmmac: do not sleep in atomic context for mdio_reset
stmmac_mdio_reset() has been updated to use msleep rather udelay
(as some PHY requires a one second delay there).
It called from stmmac_resume() within the spin_lock_irqsave block
atomic context triggering 'scheduling while atomic'.
The stmmac_priv lock usage is not fully documented, but it seems
to protect the access to the MAC registers / DMA structures rather
than the MDIO bus or the PHY (which have separate locking),
so we can push the spin_lock after the stmmac_mdio_reset call.
Signed-off-by: Vincent Palatin <vpalatin@chromium.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Wed, 1 Jun 2016 13:29:13 +0000 (15:29 +0200)]
qed: fix qed_fill_link() error handling
gcc warns about qed_fill_link possibly accessing uninitialized data:
drivers/net/ethernet/qlogic/qed/qed_main.c: In function 'qed_fill_link':
drivers/net/ethernet/qlogic/qed/qed_main.c:1170:35: error: 'link_caps' may be used uninitialized in this function [-Werror=maybe-uninitialized]
While this warning is only about the specific case of CONFIG_QED_SRIOV
being disabled but the function getting called for a VF (which should
never happen), another possibility is that qed_mcp_get_*() fails without
returning data.
This rearranges the code so we bail out in either of the two cases
and print a warning instead of accessing the uninitialized data.
The qed_link_output structure remains untouched in this case, but
all callers first call memset() on it, so at least we are not leaking
stack data then.
As discussed, we also use a compile-time check to ensure we never
use any of the VF code if CONFIG_QED_SRIOV is disabled, and the
PCI device table is updated to no longer bind to virtual functions
in that configuration.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Wed, 1 Jun 2016 13:16:50 +0000 (14:16 +0100)]
net/ethoc: fix null dereference on error exit path
priv is assigned to NULL however some of the early error exit paths to
label 'free' dereference priv, causing a null pointer dereference.
Move the label 'free' to just the free_netdev statement, and add a new
exit path 'free2' for the error cases were clk_disable_unprepare needs
calling before the final free.
Fixes issue found by CoverityScan, CID#113260
Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The following patchset contains Netfilter fixes for your net tree,
they are:
1) Fix incorrect timestamp in nfnetlink_queue introduced when addressing
y2038 safe timestamp, from Florian Westphal.
2) Get rid of leftover conntrack definition from the previous merge
window, oneliner from Florian.
3) Make nf_queue handler pernet to resolve race on dereferencing the
hook state structure with netns removal, from Eric Biederman.
4) Ensure clean exit on unregistered helper ports, from Taehee Yoo.
5) Restore FLOWI_FLAG_KNOWN_NH in nf_dup_ipv6. This got lost while
generalizing xt_TEE to add packet duplication support in nf_tables,
from Paolo Abeni.
6) Insufficient netlink NFTA_SET_TABLE attribute check in
nf_tables_getset(), from Phil Turnbull.
7) Reject helper registration on duplicated ports via modparams.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 2 Jun 2016 00:53:19 +0000 (17:53 -0700)]
Merge tag 'mac80211-for-davem-2016-06-01' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
Three small fixes for the current cycle:
* missing netlink attribute check in hwsim wmediumd (Martin)
* fast xmit structure alignment fix (Felix)
* mesh path flush/synchronisation fix (Bob)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
1) Fix negative error code usage in ATM layer, from Stefan Hajnoczi.
2) If CONFIG_SYSCTL is disabled, the default TTL is not initialized
properly. From Ezequiel Garcia.
3) Missing spinlock init in mvneta driver, from Gregory CLEMENT.
4) Missing unlocks in hwmb error paths, also from Gregory CLEMENT.
5) Fix deadlock on team->lock when propagating features, from Ivan
Vecera.
6) Work around buffer offset hw bug in alx chips, from Feng Tang.
7) Fix double listing of SCTP entries in sctp_diag dumps, from Xin
Long.
8) Various statistics bug fixes in mlx4 from Eric Dumazet.
9) Fix some randconfig build errors wrt fou ipv6 from Arnd Bergmann.
10) All of l2tp was namespace aware, but the ipv6 support code was not
doing so. From Shmulik Ladkani.
11) Handle on-stack hrtimers properly in pktgen, from Guenter Roeck.
12) Propagate MAC changes properly through VLAN devices, from Mike
Manning.
13) Fix memory leak in bnx2x_init_one(), from Vitaly Kuznetsov.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (62 commits)
sfc: Track RPS flow IDs per channel instead of per function
usbnet: smsc95xx: fix link detection for disabled autonegotiation
virtio_net: fix virtnet_open and virtnet_probe competing for try_fill_recv
bnx2x: avoid leaking memory on bnx2x_init_one() failures
fou: fix IPv6 Kconfig options
openvswitch: update checksum in {push,pop}_mpls
sctp: sctp_diag should dump sctp socket type
net: fec: update dirty_tx even if no skb
vlan: Propagate MAC address to VLANs
atm: iphase: off by one in rx_pkt()
atm: firestream: add more reserved strings
vxlan: Accept user specified MTU value when create new vxlan link
net: pktgen: Call destroy_hrtimer_on_stack()
timer: Export destroy_hrtimer_on_stack()
net: l2tp: Make l2tp_ip6 namespace aware
Documentation: ip-sysctl.txt: clarify secure_redirects
sfc: use flow dissector helpers for aRFS
ieee802154: fix logic error in ieee802154_llsec_parse_dev_addr
net: nps_enet: Disable interrupts before napi reschedule
net/lapb: tuse %*ph to dump buffers
...
Pull sparc fixes from David Miller:
"sparc64 mmu context allocation and trap return bug fixes"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc64: Fix return from trap window fill crashes.
sparc: Harden signal return frame checks.
sparc64: Take ctx_alloc_lock properly in hugetlb_setup().
Christoph Fritz [Thu, 26 May 2016 02:06:47 +0000 (04:06 +0200)]
usbnet: smsc95xx: fix link detection for disabled autonegotiation
To detect link status up/down for connections where autonegotiation is
explicitly disabled, we don't get an irq but need to poll the status
register for link up/down detection.
This patch adds a workqueue to poll for link status.
Signed-off-by: Christoph Fritz <chf.fritz@googlemail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
wangyunjian [Tue, 31 May 2016 03:52:43 +0000 (11:52 +0800)]
virtio_net: fix virtnet_open and virtnet_probe competing for try_fill_recv
In function virtnet_open() and virtnet_probe(), func try_fill_recv() may
be executed at the same time. VQ in virtqueue_add() has not been protected
well and BUG_ON will be triggered when virito_net.ko being removed.
Signed-off-by: Yunjian Wang <wangyunjian@huawei.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Vitaly Kuznetsov [Mon, 30 May 2016 13:00:54 +0000 (15:00 +0200)]
bnx2x: avoid leaking memory on bnx2x_init_one() failures
bnx2x_init_bp() allocates memory with bnx2x_alloc_mem_bp() so if we
fail later in bnx2x_init_one() we need to free this memory
with bnx2x_free_mem_bp() to avoid leakages. E.g. I'm observing memory
leaks reported by kmemleak when a failure (unrelated) happens in
bnx2x_vfpf_acquire().
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Acked-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Tue, 31 May 2016 20:42:11 +0000 (22:42 +0200)]
fou: fix IPv6 Kconfig options
The Kconfig options I added to work around broken compilation ended
up screwing up things more, as I used the wrong symbol to control
compilation of the file, resulting in IPv6 fou support to never be built
into the kernel.
Changing CONFIG_NET_FOU_IPV6_TUNNELS to CONFIG_IPV6_FOU fixes that
problem, I had renamed the symbol in one location but not the other,
and as the file is never being used by other kernel code, this did not
lead to a build failure that I would have caught.
After that fix, another issue with the same patch becomes obvious, as we
'select INET6_TUNNEL', which is related to IPV6_TUNNEL, but not the same,
and this can still cause the original build failure when IPV6_TUNNEL is
not built-in but IPV6_FOU is. The fix is equally trivial, we just need
to select the right symbol.
I have successfully build 350 randconfig kernels with this patch
and verified that the driver is now being built.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Reported-by: Valentin Rothberg <valentinrothberg@gmail.com> Fixes: fabb13db448e ("fou: add Kconfig options for IPv6 support") Signed-off-by: David S. Miller <davem@davemloft.net>
Simon Horman [Mon, 30 May 2016 05:04:25 +0000 (14:04 +0900)]
openvswitch: update checksum in {push,pop}_mpls
In the case of CHECKSUM_COMPLETE the skb checksum should be updated in
{push,pop}_mpls() as they the type in the ethernet header.
As suggested by Pravin Shelar.
Cc: Pravin Shelar <pshelar@nicira.com> Fixes: 25cd9ba0abc0 ("openvswitch: Add basic MPLS support to kernel") Signed-off-by: Simon Horman <simon.horman@netronome.com> Acked-by: Pravin B Shelar <pshelar@ovn.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Xin Long [Sun, 29 May 2016 09:42:13 +0000 (17:42 +0800)]
sctp: sctp_diag should dump sctp socket type
Now we cannot distinguish that one sk is a udp or sctp style when
we use ss to dump sctp_info. it's necessary to dump it as well.
For sctp_diag, ss support is not officially available, thus there
are no official users of this yet, so we can add this field in the
middle of sctp_info without breaking user API.
v1->v2:
- move 'sctpi_s_type' field to the end of struct sctp_info, so
that it won't cause incompatibility with applications already
built.
- add __reserved3 in sctp_info to make sure sctp_info is 8-byte
alignment.
Signed-off-by: Xin Long <lucien.xin@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Neil Horman <nhorman@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Troy Kisky [Fri, 27 May 2016 20:30:40 +0000 (13:30 -0700)]
net: fec: update dirty_tx even if no skb
If dirty_tx isn't updated, then dma_unmap_single
can be called twice.
This fixes a
[ 58.420980] ------------[ cut here ]------------
[ 58.425667] WARNING: CPU: 0 PID: 377 at /home/schurig/d/mkarm/linux-4.5/lib/dma-debug.c:1096 check_unmap+0x9d0/0xab8()
[ 58.436405] fec 2188000.ethernet: DMA-API: device driver tries to free DMA memory it has not allocated [device address=0x0000000000000000] [size=66 bytes]
encountered by Holger
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com> Tested-by: <holgerschurig@gmail.com> Acked-by: Fugang Duan <fugang.duan@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Mike Manning [Fri, 27 May 2016 16:45:07 +0000 (17:45 +0100)]
vlan: Propagate MAC address to VLANs
The MAC address of the physical interface is only copied to the VLAN
when it is first created, resulting in an inconsistency after MAC
address changes of only newly created VLANs having an up-to-date MAC.
The VLANs should continue inheriting the MAC address of the physical
interface until the VLAN MAC address is explicitly set to any value.
This allows IPv6 EUI64 addresses for the VLAN to reflect any changes
to the MAC of the physical interface and thus for DAD to behave as
expected.
Signed-off-by: Mike Manning <mmanning@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Fri, 27 May 2016 10:34:35 +0000 (13:34 +0300)]
atm: iphase: off by one in rx_pkt()
The iadev->rx_open[] array holds "iadev->num_vc" pointers (this code
assumes that pointers are 32 bits). So the > here should be >= or else
we could end up reading a garbage pointer from one element beyond the
end of the array.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
There are supposed to be 64 entries in this array and the missing
strings are clearly in the 30 40 range. I added them as reserved 37 to
reserved 40. It's possible that strings are really supposed to be added
in the middle instead of at the end, but this approach is safe, in that
it fixes the bug and doesn't break anything that wasn't already broken.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Chen Haiquan [Fri, 27 May 2016 02:49:11 +0000 (10:49 +0800)]
vxlan: Accept user specified MTU value when create new vxlan link
When create a new vxlan link, example:
ip link add vtap mtu 1440 type vxlan vni 1 dev eth0
The argument "mtu" has no effect, because it is not set to conf->mtu. The
default value is used in vxlan_dev_configure function.
This problem was introduced by commit 0dfbdf4102b9 (vxlan: Factor out device
configuration).
Fixes: 0dfbdf4102b9 (vxlan: Factor out device configuration) Signed-off-by: Chen Haiquan <oc@yunify.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Tue, 31 May 2016 16:43:24 +0000 (09:43 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
"Three bugs fixes and an update for the default configuration"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: fix info leak in do_sigsegv
s390/config: update default configuration
s390/bpf: fix recache skb->data/hlen for skb_vlan_push/pop
s390/bpf: reduce maximum program size to 64 KB
Linus Torvalds [Tue, 31 May 2016 16:27:00 +0000 (09:27 -0700)]
Merge tag 'gpio-v4.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"A bunch of GPIO fixes for the v4.7 series:
- Drop the lock before reading out the GPIO direction setting in
drivers supporting the .get_direction() callback: some of them may
be slowpath.
- Flush GPIO direction setting before locking a GPIO as an IRQ: some
electronics or other poking around in the registers behind our back
may have happened, so flush the direction status before trying to
lock the line for use by IRQs.
- Bail out silently when asked to perform operations on NULL GPIO
descriptors. That is what all the get_*_optional() is about: we
get optional GPIO handles, if they are not there, we get NULL.
- Handle compatible ioctl() correctly: we need to convert the ioctl()
pointer using compat_ptr() here like everyone else.
- Disable the broken .to_irq() on the LPC32xx platform. The whole
irqchip infrastructure was replaced in the last merge window, and a
new implementation will be needed"
* tag 'gpio-v4.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: drop lock before reading GPIO direction
gpio: bail out silently on NULL descriptors
gpio: handle compatible ioctl() pointers
gpio: flush direction status in gpiochip_lock_as_irq()
gpio: lpc32xx: disable broken to_irq support
Felix Fietkau [Thu, 19 May 2016 15:34:38 +0000 (17:34 +0200)]
mac80211: fix fast_tx header alignment
The header field is defined as u8[] but also accessed as struct
ieee80211_hdr. Enforce an alignment of 2 to prevent unnecessary
unaligned accesses, which can be very harmful for performance on many
platforms.
Fixes: e495c24731a2 ("mac80211: extend fast-xmit for more ciphers") Cc: stable@vger.kernel.org Signed-off-by: Felix Fietkau <nbd@nbd.name> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Fix both of these by unconditionally flushing paths before destroying
the sta, and by adding a synchronize_net() after path flush to ensure
no active readers can still dereference the sta.
Cc: stable@vger.kernel.org Reported-by: Fred Veldini <fred.veldini@gmail.com> Tested-by: Fred Veldini <fred.veldini@gmail.com> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Martin Willi [Fri, 13 May 2016 10:41:48 +0000 (12:41 +0200)]
mac80211_hwsim: Add missing check for HWSIM_ATTR_SIGNAL
A wmediumd that does not send this attribute causes a NULL pointer
dereference, as the attribute is accessed even if it does not exist.
The attribute was required but never checked ever since userspace frame
forwarding has been introduced. The issue gets more problematic once we
allow wmediumd registration from user namespaces.
Cc: stable@vger.kernel.org Fixes: 7882513bacb1 ("mac80211_hwsim driver support userspace frame tx/rx") Signed-off-by: Martin Willi <martin@strongswan.org> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
netfilter: nf_ct_helper: bail out on duplicated helpers
Don't allow registration of helpers using the same tuple:
{ l3proto, l4proto, src-port }
We lookup for the helper from the packet path using this tuple through
__nf_ct_helper_find(). Therefore, we have to avoid having two helpers
with the same tuple to ensure predictible behaviour.
Don't compare the helper string names anymore since it is valid to
register two helpers with the same name, but using different tuples.
This is also implicitly fixing up duplicated helper registration via
ports= modparam since the name comparison was defeating the tuple
duplication validation.
Andy Shevchenko [Mon, 30 May 2016 14:40:41 +0000 (17:40 +0300)]
lib/uuid: add a test module
It appears that somehow I missed a test of the latest UUID rework which
landed in the kernel. Present a small test module to avoid such cases
in the future.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Walleij [Mon, 30 May 2016 15:11:59 +0000 (17:11 +0200)]
gpio: drop lock before reading GPIO direction
When adding the gpiochip, the GPIO HW drivers' callback get_direction()
could get called in atomic context. Some of the GPIO HW drivers may
sleep when accessing the register.
Move the lock before initializing the descriptors.
Linus Walleij [Mon, 30 May 2016 14:48:39 +0000 (16:48 +0200)]
gpio: bail out silently on NULL descriptors
In fdeb8e1547cb9dd39d5d7223b33f3565cf86c28e
("gpio: reflect base and ngpio into gpio_device")
assumed that GPIO descriptors are either valid or error
pointers, but gpiod_get_[index_]optional() actually return
NULL descriptors and then all subsequent calls should just
bail out.
Cc: stable@vger.kernel.org Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc: Florian Fainelli <f.fainelli@gmail.com> Cc: Andrew Lunn <andrew@lunn.ch> Fixes: fdeb8e1547cb ("gpio: reflect base and ngpio into gpio_device") Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
If the NFTA_SET_TABLE parameter is missing and the NLM_F_DUMP flag is
not set, then a NULL pointer dereference is triggered in
nf_tables_set_lookup because ctx.table is NULL.
Signed-off-by: Phil Turnbull <phil.turnbull@oracle.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Paolo Abeni [Thu, 26 May 2016 17:08:10 +0000 (19:08 +0200)]
netfilter: nf_dup_ipv6: set again FLOWI_FLAG_KNOWN_NH at flowi6_flags
With the commit 48e8aa6e3137 ("ipv6: Set FLOWI_FLAG_KNOWN_NH at
flowi6_flags") ip6_pol_route() callers were asked to to set the
FLOWI_FLAG_KNOWN_NH properly and xt_TEE was updated accordingly,
but with the later refactor in commit bbde9fc1824a ("netfilter:
factor out packet duplication for IPv4/IPv6") the flowi6_flags
update was lost.
This commit re-add it just before the routing decision.
Fixes: bbde9fc1824a ("netfilter: factor out packet duplication for IPv4/IPv6") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Linus Walleij [Wed, 25 May 2016 08:56:03 +0000 (10:56 +0200)]
gpio: flush direction status in gpiochip_lock_as_irq()
As irqchip and gpiochip functions are orthogonal, the IRQ
set-up or something else can have changed the direction of
the GPIO line from what the GPIO descriptor knows when we
get into gpiochip_lock_as_irq(). Make sure to re-read the
direction setting if we have the .get_direction() callback
enabled for the chip.
Else we get problems like this:
iio iio:device2: interrupts on the rising edge
gpio gpiochip2: (8012e080.gpio): gpiochip_lock_as_irq:
tried to flag a GPIO set as output for IRQ
gpio gpiochip2: (8012e080.gpio): unable to lock HW IRQ 0 for IRQ
genirq: Failed to request resources for l3g4200d-trigger
(irq 111) on irqchip nmk1-32-63
iio iio:device2: failed to request trigger IRQ.
st-gyro-i2c: probe of 2-0068 failed with error -22
Fixes: 72d320006177 ("gpio: set up initial state from .get_direction()") Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Baozeng Ding [Thu, 26 May 2016 13:07:42 +0000 (21:07 +0800)]
ieee802154: fix logic error in ieee802154_llsec_parse_dev_addr
Fix a logic error to avoid potential null pointer dereference.
Signed-off-by: Baozeng Ding <sploving1@gmail.com> Reviewed-by: Stefan Schmidt<stefan@osg.samsung.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Elad Kanfi [Thu, 26 May 2016 12:00:06 +0000 (15:00 +0300)]
net: nps_enet: Disable interrupts before napi reschedule
Since NAPI works by shutting down event interrupts when theres
work and turning them on when theres none, the net driver must
make sure that interrupts are disabled when it reschedules polling.
By calling napi_reschedule, the driver switches to polling mode,
therefor there should be no interrupt interference.
Any received packets will be handled in nps_enet_poll by polling the HW
indication of received packet until all packets are handled.
Signed-off-by: Elad Kanfi <eladkan@mellanox.com> Acked-by: Noam Camus <noamca@mellanox.com> Tested-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Thu, 26 May 2016 06:46:22 +0000 (09:46 +0300)]
ptp: oops in ptp_ioctl()
If we pass ERR_PTR(-EFAULT) to kfree() then it's going to oops.
Fixes: 2ece068e1b1d ('ptp: use memdup_user().') Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Wed, 25 May 2016 14:50:46 +0000 (16:50 +0200)]
fou: add Kconfig options for IPv6 support
A previous patch added the fou6.ko module, but that failed to link
in a couple of configurations:
net/built-in.o: In function `ip6_tnl_encap_add_fou_ops':
net/ipv6/fou6.c:88: undefined reference to `ip6_tnl_encap_add_ops'
net/ipv6/fou6.c:94: undefined reference to `ip6_tnl_encap_add_ops'
net/ipv6/fou6.c:97: undefined reference to `ip6_tnl_encap_del_ops'
net/built-in.o: In function `ip6_tnl_encap_del_fou_ops':
net/ipv6/fou6.c:106: undefined reference to `ip6_tnl_encap_del_ops'
net/ipv6/fou6.c:107: undefined reference to `ip6_tnl_encap_del_ops'
If CONFIG_IPV6=m, ip6_tnl_encap_add_ops/ip6_tnl_encap_del_ops
are in a module, but fou6.c can still be built-in, and that
obviously fails to link.
Also, if CONFIG_IPV6=y, but CONFIG_IPV6_TUNNEL=m or
CONFIG_IPV6_TUNNEL=n, the same problem happens for a different
reason.
This adds two new silent Kconfig symbols to work around both
problems:
- CONFIG_IPV6_FOU is now always set to 'm' if either CONFIG_NET_FOU=m
or CONFIG_IPV6=m
- CONFIG_IPV6_FOU_TUNNEL is set implicitly when IPV6_FOU is enabled
and NET_FOU_IP_TUNNELS is also turned out, and it will ensure
that CONFIG_IPV6_TUNNEL is also available.
The options could be made user-visible as well, to give additional
room for configuration, but it seems easier not to bother users
with more choice here.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: aa3463d65e7b ("fou: Add encap ops for IPv6 tunnels") Signed-off-by: David S. Miller <davem@davemloft.net>
A recent cleanup moved MAX_IPTUN_ENCAP_OPS along with some other
definitions, but it is now invisible when CONFIG_INET is
not defined, but still referenced from ip6_tunnel.h:
In file included from net/xfrm/xfrm_input.c:17:0:
include/net/ip6_tunnel.h:67:17: error: 'MAX_IPTUN_ENCAP_OPS' undeclared here (not in a function)
ip6tun_encaps[MAX_IPTUN_ENCAP_OPS];
^~~~~~~~~~~~~~~~~~~
This hides the ip6_encap_hlen and ip6_tnl_encap functions inside
of CONFIG_INET so we don't run into the the problem.
Alternatively we could move the macro out of the #ifdef again to
restore the previous behavior
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: 55c2bc143224 ("net: Cleanup encap items in ip_tunnels.h") Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 29 May 2016 03:41:12 +0000 (20:41 -0700)]
sparc64: Fix return from trap window fill crashes.
We must handle data access exception as well as memory address unaligned
exceptions from return from trap window fill faults, not just normal
TLB misses.
Otherwise we can get an OOPS that looks like this:
The window trap handlers are slightly clever, the trap table entries for them are
composed of two pieces of code. First comes the code that actually performs
the window fill or spill trap handling, and then there are three instructions at
the end which are for exception processing.
And the way this works is that if any of those memory accesses
generate an exception, the exception handler can revector to one of
those final three branch instructions depending upon which kind of
exception the memory access took. In this way, the fault handler
doesn't have to know if it was a spill or a fill that it's handling
the fault for. It just always branches to the last instruction in
the parent trap's handler.
All window trap handlers are 0x80 aligned, so if we "or" 0x7c into the
trap time program counter, we'll get that final instruction in the
trap handler.
On return from trap, we have to pull the register window in but we do
this by hand instead of just executing a "restore" instruction for
several reasons. The largest being that from Niagara and onward we
simply don't have enough levels in the trap stack to fully resolve all
possible exception cases of a window fault when we are already at
trap level 1 (which we enter to get ready to return from the original
trap).
This is executed inline via the FILL_*_RTRAP handlers. rtrap_64.S's
code branches directly to these to do the window fill by hand if
necessary. Now if you look at them, we'll see at the end:
And oops, all three cases are handled like a fault.
This doesn't work because each of these trap types (data access
exception, memory address unaligned, and faults) store their auxiliary
info in different registers to pass on to the C handler which does the
real work.
So in the case where the stack was unaligned, the unaligned trap
handler sets up the arg registers one way, and then we branched to
the fault handler which expects them setup another way.
So the FAULT_TYPE_* value ends up basically being garbage, and
randomly would generate the backtrace seen above.
Reported-by: Nick Alcock <nix@esperi.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Sun, 29 May 2016 20:28:39 +0000 (13:28 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is a set of four fixes noticed in the merge window. The aacraid
one is an optimisation, the mp3sas one fixes a spurious printk, the
sd_check_events one fixes a theoretical race and the failed zero
length commands fixes a bug in our completion/retry routines that has
been causing problems in the field"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
aacraid: do not activate events on non-SRC adapters
mpt3sas: add missing curly braces
sd: get disk reference in sd_check_events()
scsi_lib: correctly retry failed zero length REQ_TYPE_FS commands
George Spelvin [Sun, 29 May 2016 05:26:41 +0000 (01:26 -0400)]
Rename other copy of hash_string to hashlen_string
The original name was simply hash_string(), but that conflicted with a
function with that name in drivers/base/power/trace.c, and I decided
that calling it "hashlen_" was better anyway.
But you have to do it in two places.
[ This caused build errors for architectures that don't define
CONFIG_DCACHE_WORD_ACCESS - Linus ]
Mikulas Patocka [Tue, 24 May 2016 20:49:18 +0000 (22:49 +0200)]
hpfs: implement the show_options method
The HPFS filesystem used generic_show_options to produce string that is
displayed in /proc/mounts. However, there is a problem that the options
may disappear after remount. If we mount the filesystem with option1
and then remount it with option2, /proc/mounts should show both option1
and option2, however it only shows option2 because the whole option
string is replaced with replace_mount_options in hpfs_remount_fs.
To fix this bug, implement the hpfs_show_options function that prints
options that are currently selected.
Mikulas Patocka [Tue, 24 May 2016 20:48:33 +0000 (22:48 +0200)]
affs: fix remount failure when there are no options changed
Commit c8f33d0bec99 ("affs: kstrdup() memory handling") checks if the
kstrdup function returns NULL due to out-of-memory condition.
However, if we are remounting a filesystem with no change to
filesystem-specific options, the parameter data is NULL. In this case,
kstrdup returns NULL (because it was passed NULL parameter), although no
out of memory condition exists. The mount syscall then fails with
ENOMEM.
This patch fixes the bug. We fail with ENOMEM only if data is non-NULL.
The patch also changes the call to replace_mount_options - if we didn't
pass any filesystem-specific options, we don't call
replace_mount_options (thus we don't erase existing reported options).
Mikulas Patocka [Tue, 24 May 2016 20:47:00 +0000 (22:47 +0200)]
hpfs: fix remount failure when there are no options changed
Commit ce657611baf9 ("hpfs: kstrdup() out of memory handling") checks if
the kstrdup function returns NULL due to out-of-memory condition.
However, if we are remounting a filesystem with no change to
filesystem-specific options, the parameter data is NULL. In this case,
kstrdup returns NULL (because it was passed NULL parameter), although no
out of memory condition exists. The mount syscall then fails with
ENOMEM.
This patch fixes the bug. We fail with ENOMEM only if data is non-NULL.
The patch also changes the call to replace_mount_options - if we didn't
pass any filesystem-specific options, we don't call
replace_mount_options (thus we don't erase existing reported options).
Fixes: ce657611baf9 ("hpfs: kstrdup() out of memory handling") Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
VDSO:
- Build microMIPS VDSO for microMIPS kernels.
- Fix aliasing warning by building with `-fno-strict-aliasing' for
debugging but also tracing them might result in recursion.
Misc:
- Add missing FROZEN hotplug notifier transitions.
- Fix clk binding example for varioius PIC32 devices.
- Fix cpu interrupt controller node-names in the DT files.
- Fix XPA CPU feature separation.
- Fix write_gc0_* macros when writing zero.
- Add inline asm encoding helpers.
- Add missing VZ accessor microMIPS encodings.
- Fix little endian microMIPS MSA encodings.
- Add 64-bit HTW fields and fix its configuration.
- Fix sigreturn via VDSO on microMIPS kernel.
- Lots of typo fixes.
- Add definitions of SegCtl registers and use them"
Linus Torvalds [Sat, 28 May 2016 23:15:25 +0000 (16:15 -0700)]
Merge branch 'hash' of git://ftp.sciencehorizons.net/linux
Pull string hash improvements from George Spelvin:
"This series does several related things:
- Makes the dcache hash (fs/namei.c) useful for general kernel use.
(Thanks to Bruce for noticing the zero-length corner case)
- Converts the string hashes in <linux/sunrpc/svcauth.h> to use the
above.
- Avoids 64-bit multiplies in hash_64() on 32-bit platforms. Two
32-bit multiplies will do well enough.
- Rids the world of the bad hash multipliers in hash_32.
This finishes the job started in commit 689de1d6ca95 ("Minimal
fix-up of bad hashing behavior of hash_64()")
The vast majority of Linux architectures have hardware support for
32x32-bit multiply and so derive no benefit from "simplified"
multipliers.
The few processors that do not (68000, h8/300 and some models of
Microblaze) have arch-specific implementations added. Those
patches are last in the series.
- Overhauls the dcache hash mixing.
The patch in commit 0fed3ac866ea ("namei: Improve hash mixing if
CONFIG_DCACHE_WORD_ACCESS") was an off-the-cuff suggestion.
Replaced with a much more careful design that's simultaneously
faster and better. (My own invention, as there was noting suitable
in the literature I could find. Comments welcome!)
- Modify the hash_name() loop to skip the initial HASH_MIX(). This
would let us salt the hash if we ever wanted to.
- Sort out partial_name_hash().
The hash function is declared as using a long state, even though
it's truncated to 32 bits at the end and the extra internal state
contributes nothing to the result. And some callers do odd things:
- fs/hfs/string.c only allocates 32 bits of state
- fs/hfsplus/unicode.c uses it to hash 16-bit unicode symbols not bytes
- Modify bytemask_from_count to handle inputs of 1..sizeof(long)
rather than 0..sizeof(long)-1. This would simplify users other
than full_name_hash"
Special thanks to Bruce Fields for testing and finding bugs in v1. (I
learned some humbling lessons about "obviously correct" code.)
On the arch-specific front, the m68k assembly has been tested in a
standalone test harness, I've been in contact with the Microblaze
maintainers who mostly don't care, as the hardware multiplier is never
omitted in real-world applications, and I haven't heard anything from
the H8/300 world"
* 'hash' of git://ftp.sciencehorizons.net/linux:
h8300: Add <asm/hash.h>
microblaze: Add <asm/hash.h>
m68k: Add <asm/hash.h>
<linux/hash.h>: Add support for architecture-specific functions
fs/namei.c: Improve dcache hash function
Eliminate bad hash multipliers from hash_32() and hash_64()
Change hash_64() return value to 32 bits
<linux/sunrpc/svcauth.h>: Define hash_str() in terms of hashlen_string()
fs/namei.c: Add hashlen_string() function
Pull out string hash to <linux/stringhash.h>
George Spelvin [Wed, 25 May 2016 18:19:49 +0000 (14:19 -0400)]
h8300: Add <asm/hash.h>
This will improve the performance of hash_32() and hash_64(), but due
to complete lack of multi-bit shift instructions on H8, performance will
still be bad in surrounding code.
Designing H8-specific hash algorithms to work around that is a separate
project. (But if the maintainers would like to get in touch...)
Signed-off-by: George Spelvin <linux@sciencehorizons.net> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: uclinux-h8-devel@lists.sourceforge.jp
George Spelvin [Wed, 25 May 2016 15:06:09 +0000 (11:06 -0400)]
microblaze: Add <asm/hash.h>
Microblaze is an FPGA soft core that can be configured various ways.
If it is configured without a multiplier, the standard __hash_32()
will require a call to __mulsi3, which is a slow software loop.
Instead, use a shift-and-add sequence for the constant multiply.
GCC knows how to do this, but it's not as clever as some.
Signed-off-by: George Spelvin <linux@sciencehorizons.net> Cc: Alistair Francis <alistair.francis@xilinx.com> Cc: Michal Simek <michal.simek@xilinx.com>
George Spelvin [Fri, 27 May 2016 02:11:51 +0000 (22:11 -0400)]
<linux/hash.h>: Add support for architecture-specific functions
This is just the infrastructure; there are no users yet.
This is modelled on CONFIG_ARCH_RANDOM; a CONFIG_ symbol declares
the existence of <asm/hash.h>.
That file may define its own versions of various functions, and define
HAVE_* symbols (no CONFIG_ prefix!) to suppress the generic ones.
Included is a self-test (in lib/test_hash.c) that verifies the basics.
It is NOT in general required that the arch-specific functions compute
the same thing as the generic, but if a HAVE_* symbol is defined with
the value 1, then equality is tested.
Signed-off-by: George Spelvin <linux@sciencehorizons.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Andreas Schwab <schwab@linux-m68k.org> Cc: Philippe De Muyter <phdm@macq.eu> Cc: linux-m68k@lists.linux-m68k.org Cc: Alistair Francis <alistai@xilinx.com> Cc: Michal Simek <michal.simek@xilinx.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: uclinux-h8-devel@lists.sourceforge.jp
George Spelvin [Mon, 23 May 2016 11:43:58 +0000 (07:43 -0400)]
fs/namei.c: Improve dcache hash function
Patch 0fed3ac866 improved the hash mixing, but the function is slower
than necessary; there's a 7-instruction dependency chain (10 on x86)
each loop iteration.
Word-at-a-time access is a very tight loop (which is good, because
link_path_walk() is one of the hottest code paths in the entire kernel),
and the hash mixing function must not have a longer latency to avoid
slowing it down.
There do not appear to be any published fast hash functions that:
1) Operate on the input a word at a time, and
2) Don't need to know the length of the input beforehand, and
3) Have a single iterated mixing function, not needing conditional
branches or unrolling to distinguish different loop iterations.
One of the algorithms which comes closest is Yann Collet's xxHash, but
that's two dependent multiplies per word, which is too much.
The key insights in this design are:
1) Barring expensive ops like multiplies, to diffuse one input bit
across 64 bits of hash state takes at least log2(64) = 6 sequentially
dependent instructions. That is more cycles than we'd like.
2) An operation like "hash ^= hash << 13" requires a second temporary
register anyway, and on a 2-operand machine like x86, it's three
instructions.
3) A better use of a second register is to hold a two-word hash state.
With careful design, no temporaries are needed at all, so it doesn't
increase register pressure. And this gets rid of register copying
on 2-operand machines, so the code is smaller and faster.
4) Using two words of state weakens the requirement for one-round mixing;
we now have two rounds of mixing before cancellation is possible.
5) A two-word hash state also allows operations on both halves to be
done in parallel, so on a superscalar processor we get more mixing
in fewer cycles.
I ended up using a mixing function inspired by the ChaCha and Speck
round functions. It is 6 simple instructions and 3 cycles per iteration
(assuming multiply by 9 can be done by an "lea" instruction):
x ^= *input++;
y ^= x; x = ROL(x, K1);
x += y; y = ROL(y, K2);
y *= 9;
Not only is this reversible, two consecutive rounds are reversible:
if you are given the initial and final states, but not the intermediate
state, it is possible to compute both input words. This means that at
least 3 words of input are required to create a collision.
(It also has the property, used by hash_name() to avoid a branch, that
it hashes all-zero to all-zero.)
The rotate constants K1 and K2 were found by experiment. The search took
a sample of random initial states (I used 1023) and considered the effect
of flipping each of the 64 input bits on each of the 128 output bits two
rounds later. Each of the 8192 pairs can be considered a biased coin, and
adding up the Shannon entropy of all of them produces a score.
The best-scoring shifts also did well in other tests (flipping bits in y,
trying 3 or 4 rounds of mixing, flipping all 64*63/2 pairs of input bits),
so the choice was made with the additional constraint that the sum of the
shifts is odd and not too close to the word size.
The final state is then folded into a 32-bit hash value by a less carefully
optimized multiply-based scheme. This also has to be fast, as pathname
components tend to be short (the most common case is one iteration!), but
there's some room for latency, as there is a fair bit of intervening logic
before the hash value is used for anything.
(Performance verified with "bonnie++ -s 0 -n 1536:-2" on tmpfs. I need
a better benchmark; the numbers seem to show a slight dip in performance
between 4.6.0 and this patch, but they're too noisy to quote.)
Special thanks to Bruce fields for diligent testing which uncovered a
nasty fencepost error in an earlier version of this patch.
[checkpatch.pl formatting complaints noted and respectfully disagreed with.]
Signed-off-by: George Spelvin <linux@sciencehorizons.net> Tested-by: J. Bruce Fields <bfields@redhat.com>
George Spelvin [Fri, 27 May 2016 03:00:23 +0000 (23:00 -0400)]
Eliminate bad hash multipliers from hash_32() and hash_64()
The "simplified" prime multipliers made very bad hash functions, so get rid
of them. This completes the work of 689de1d6ca.
To avoid the inefficiency which was the motivation for the "simplified"
multipliers, hash_64() on 32-bit systems is changed to use a different
algorithm. It makes two calls to hash_32() instead.
drivers/media/usb/dvb-usb-v2/af9015.c uses the old GOLDEN_RATIO_PRIME_32
for some horrible reason, so it inherits a copy of the old definition.
Signed-off-by: George Spelvin <linux@sciencehorizons.net> Cc: Antti Palosaari <crope@iki.fi> Cc: Mauro Carvalho Chehab <m.chehab@samsung.com>
projects / karo-tx-linux.git / log