Deepak S [Tue, 9 Sep 2014 13:44:16 +0000 (19:14 +0530)]
drm/i915: add cherryview specfic forcewake in execlists_elsp_write
In chv, we have two power wells Render & Media. We need to use
corresponsing forcewake count. If we dont follow this we are getting
error "*ERROR*: Timed out waiting for forcewake old ack to clear" due to
multiple entry into __vlv_force_wake_get.
Signed-off-by: Deepak S <deepak.s@linux.intel.com> Requested-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Michel Thierry [Tue, 9 Sep 2014 12:04:43 +0000 (13:04 +0100)]
drm/i915: fix another use-after-free in i915_gem_evict_everything
Also here, i915_gem_evict_vm causes an unbind, which can end up dropping
the last ref to the ppgtt.
Triggered by igt gem_evict_everything test.
Testcase: igt/gem_evict_everything Signed-off-by: Michel Thierry <michel.thierry@intel.com> Reviewed-by: Chris Wilson <chris@cris-wilsonc.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Since display interrups in general survive a gpu reset on those
platforms there's also no need to reinit the hotplug settings.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Sun, 7 Sep 2014 15:51:12 +0000 (16:51 +0100)]
drm/i915: Wrap -EIO send-vblank event for failed pageflip in spinlock
drm_send_vblank_event() demands that we hold the event spinlock whilst
calling it, so do so.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Fix the double lock as requested by Chris.] Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Tue, 9 Sep 2014 06:02:43 +0000 (07:02 +0100)]
drm/i915: Drop any active reference before unbinding
Before we process the final unbind on an object and move it to the
unbound list, it is semantically cleaner if there are no more active
references to the object. (An active reference would imply that it was
still being accessed by the GPU after it became inaccessible.) The
caveat is that all callsites must be prepared for the object to
disappeared during the unbind - i.e. they must hold their own reference.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Tue, 9 Sep 2014 10:16:08 +0000 (11:16 +0100)]
drm/i915: Objects on the unbound list may still have an active reference
Due to the lazy retirement semantics, even though we have unbound an
object, it may still hold onto an active reference. So in the debug code,
play safe.
v2: Export i915_gem_shrink() rather than opencoding it.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
drm/i915: use lane count and link rate from VBT as minimums for eDP
should have started using the optimal link parameters for eDP
panels. Turns out a certain other OS uses DPCD instead of VBT, which
means trusting VBT on this may not be so reliable after all. Follow
suit.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=81647 Tested-by: Adam Jirasek <libm3l@gmail.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=79386 Tested-by: Narthana Epa <narthana.epa+freedesktop@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Thu, 4 Sep 2014 20:43:45 +0000 (21:43 +0100)]
drm/i915/hdmi, dp: Do not dereference the encoder in the connector destroy
Oops, apparently intel_hdmi/intel_dp is the encoder - an object with a
distinct lifetime to the connector, and so we cannot simply reuse the
common function to unset and free the edid.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 5 Sep 2014 18:54:13 +0000 (21:54 +0300)]
drm/i915: Limit the watermark to at least 8 entries on gen2/3
830 is very unhappy of the watermark value is too low (indicating a very
high watermark in fact, ie. memory fetch will occur with an almost full
FIFO). Limit the watermark value to at least 8 cache lines.
That also matches the burst size we use on most platforms. BSpec seems
to indicate we should limit the watermark to 'burst size + 1'. But on
gen4 we already use a hardcoded 8 as the watermark value (as the spec
says we should), so just use 8 as the limit on gen2/3 as well.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Ville Syrjälä [Fri, 5 Sep 2014 18:52:42 +0000 (21:52 +0300)]
drm/i915: Fix DVO 2x clock enable on 830M
The spec says:
"For the correct operation of the muxed DVO pins (GDEVSELB/ I2Cdata,
GIRDBY/I2CClk) and (GFRAMEB/DVI_Data, GTRDYB/DVI_Clk): Bit 31
(DPLL VCO Enable) and Bit 30 (2X Clock Enable) must be set to “1” in
both the DPLL A Control Register (06014h-06017h) and DPLL B Control
Register (06018h-0601Bh)."
The pipe A and B force quirks take care of DPLL_VCO_ENABLE, so we
just need a bit of special care to handle DPLL_DVO_2X_MODE.
v2: Recompute num_dvo_pipes on the spot, use PIPE_A/PIPE_B instead
of pipe/!pipe for the register offsets in disable (Daniel)
Add a comment about the ordering in enable and another one
about filtering out the DVO 2x bit in state readout
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Thomas Richter <richter@rus.uni-stuttgart.de> (v1) Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Dave Airlie [Wed, 17 Sep 2014 09:55:19 +0000 (19:55 +1000)]
Merge branch 'drm/next/du' of git://linuxtv.org/pinchartl/fbdev into drm-next
Commit "drm/rcar-du: Use struct videomode in platform data" touches board code
in arch/arm/mach-shmobile. There is, to the best of my knowledge, no risk of
conflict for v3.18. Simon, are you fine with getting those changes merged
through Dave's tree (and could you confirm that no conflict should occur) ?
Simon acked the merge: Acked-by: Simon Horman <horms+renesas@verge.net.au>
* 'drm/next/du' of git://linuxtv.org/pinchartl/fbdev:
drm/rcar-du: Add OF support
drm/rcar-du: Use struct videomode in platform data
video: Add DT bindings for the R-Car Display Unit
video: Add THC63LVDM83D DT bindings documentation
video: Add ADV7123 DT bindings documentation
video: Add DT binding documentation for VGA connector
devicetree: Add vendor prefix "thine" to vendor-prefixes.txt
devicetree: Add vendor prefix "mitsubishi" to vendor-prefixes.txt
drm/shmob: Update copyright notice
drm/rcar-du: Update copyright notice
While zone->name is currently hard coded, the call to kobject_init_and_add()
should follow the more defensive argument list usage (as already done in
other places in ttm_memory.c) where "%s" is used instead of directly passing
in a variable as a format string.
Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
In order to support the "enable GPIO" available in many panel devices,
this commit adds a proper devicetree binding.
By providing an enable GPIO in the devicetree, the driver can now turn
off and on the panel device, and/or the backlight device. Both the
backlight and the GPIO are optional properties.
Tested-by: Darren Etheridge <detheridge@ti.com> Tested-by: Johannes Pointner <johannes.pointner@br-automation.com> Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Dave Airlie <airlied@redhat.com>
Instead of setting an initial value for the return code, set it explicitly
on each error path. This is just a cosmetic cleanup, as preparation for the
enable GPIO support.
Tested-by: Darren Etheridge <detheridge@ti.com> Tested-by: Johannes Pointner <johannes.pointner@br-automation.com> Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Dave Airlie <airlied@redhat.com>
drm/tilcdc: panel: Fix backlight devicetree support
The current backlight support is broken; the driver expects a backlight-class
in the panel devicetree node. Fix this by implementing it properly, getting
an optional backlight from a phandle.
This shouldn't cause any backward-compatibility DT issue because the current
implementation doesn't work and is not even documented.
Tested-by: Darren Etheridge <detheridge@ti.com> Tested-by: Johannes Pointner <johannes.pointner@br-automation.com> Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Dave Airlie <airlied@redhat.com>
This commit adds the missing calls to of_node_put to release the node
that's currently held by the of_get_child_by_name() call in the panel
info parsing code.
Tested-by: Darren Etheridge <detheridge@ti.com> Tested-by: Johannes Pointner <johannes.pointner@br-automation.com> Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Dave Airlie <airlied@redhat.com>
The current error path calls tilcdc_unload() in case of an error to release
the resources. However, this is wrong because not all resources have been
allocated by the time an error occurs in tilcdc_load().
To fix it, this commit adds proper labels to bail out at the different
stages in the load function, and release only the resources actually allocated.
Tested-by: Darren Etheridge <detheridge@ti.com> Tested-by: Johannes Pointner <johannes.pointner@br-automation.com> Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar> Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Tue, 16 Sep 2014 06:02:09 +0000 (16:02 +1000)]
Merge tag 'drm-intel-next-2014-09-05' of git://anongit.freedesktop.org/drm-intel into drm-next
- final bits (again) for the rotation support (Sonika Jindal)
- support bl_power in the intel backlight (Jani)
- vdd handling improvements from Ville
- i830M fixes from Ville
- piles of prep work all over to make skl enabling just plug in (Damien, Sonika)
- rename DP training defines to reflect latest edp standards, this touches all
drm drivers supporting DP (Sonika Jindal)
- cache edids during single detect cycle to avoid re-reading it for e.g. audio,
from Chris
- move w/a for registers which are stored in the hw context to the context init
code (Arun&Damien)
- edp panel power sequencer fixes, helps chv a lot (Ville)
- piles of other chv fixes all over
- much more paranoid pageflip handling with stall detection and better recovery
from Chris
- small things all over, as usual
* tag 'drm-intel-next-2014-09-05' of git://anongit.freedesktop.org/drm-intel: (114 commits)
drm/i915: Update DRIVER_DATE to 20140905
drm/i915: Decouple the stuck pageflip on modeset
drm/i915: Check for a stalled page flip after each vblank
drm/i915: Introduce a for_each_plane() macro
drm/i915: Rewrite ABS_DIFF() in a safer manner
drm/i915: Add comments explaining the vdd on/off functions
drm/i915: Move DP port disable to post_disable for pch platforms
drm/i915: Enable DP port earlier
drm/i915: Turn on panel power before doing aux transfers
drm/i915: Be more careful when picking the initial power sequencer pipe
drm/i915: Reset power sequencer pipe tracking when disp2d is off
drm/i915: Track which port is using which pipe's power sequencer
drm/i915: Fix edp vdd locking
drm/i915: Reset the HEAD pointer for the ring after writing START
drm/i915: Fix unsafe vma iteration in i915_drop_caches
drm/i915: init sprites with univeral plane init function
drm/i915: Check of !HAS_PCH_SPLIT() in PCH transcoder funcs
drm/i915: Use HAS_GMCH_DISPLAY un underrun reporting code
drm/i915: Use IS_BROADWELL() instead of IS_GEN8() in forcewake code
drm/i915: Don't call gen8_fbc_sw_flush() on chv
...
Dave Airlie [Tue, 16 Sep 2014 04:59:16 +0000 (14:59 +1000)]
Merge branch 'drm-next-ast-fixes' of ssh://people.freedesktop.org/~/linux into drm-next
Pull in first set of changes from Ben for ast on ppc.
I've done a quick boot test on x86 and it still seems to boot.
* 'drm-next-ast-fixes' of ssh://people.freedesktop.org/~/linux:
drm/ast: Cleanup analog init code path
drm/ast: Don't assume DVO enabled means SIL164 on uninitialized chips
drm/ast: Properly initialize P2A base before using it in ast_init_3rdtx()
drm/ast: POST chip at probe time if VGA not enabled
drm/ast: Try to use MMIO registers when PIO isn't supported
Dave Airlie [Mon, 15 Sep 2014 20:20:53 +0000 (06:20 +1000)]
Merge branch 'linux-3.18' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next
This is the main merge request for Nouveau 3.18, overview:
- various bits of roy's gt21x clock work
- various bits of kepler memory clock work (don't get too excited, there's at least one more major bit left that's busting higher freqs)
- misc fan control improvements
- kepler hdmi infoframe fixes
- dp audio
- l2 cache + cbc improvements
* 'linux-3.18' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: (68 commits)
drm/gt214-/disp: enable dp audio
drm/gt214-/kms: fix hda eld regression
drm/g94-/disp: calculate some dp audio constants
drm/gt214-/kms: perform hda codec setup on displayport too
drm/gk104-/disp: infoframe registers moved yet again on kepler
drm/nouveau/bios: parse older ramcfg/timing data like we do newer ones
drm/nva3/fb/ram: Per-partition regs
drm/nouveau/fb/ram: Support strided regs
drm/nv50/fb/ram: Store the number of partitions in the designated fields
drm/nv50/kms: Set VBLANK time in modeset script
drm/nouveau/bios: Add rammap support for version 1.0
drm/gf100-/pwr/memx: block host and fifo around reclock
drm/nouveau/pwr/memx: fix command ordering around block/unblock
drm/nouveau/pwr/memx: rename fb off/on to block/unblock
drm/nva3/clk: Pause the GPU before reclocking
drm/nouveau/gpio: rename g92 class to g94
drm/gk104-/fb/ram: move fb enable/disable to same place as nvidia
drm/gk104/fb/ram: twiddle some more bits when reclocking
drm/nouveau/bios: parse another large chunk of random memory config data
drm/gk104-/fb/ram: perform certain steps only when bios data differs
...
Ben Skeggs [Thu, 11 Sep 2014 12:59:13 +0000 (22:59 +1000)]
drm/nouveau/pwr/memx: rename fb off/on to block/unblock
More accurate as to the function of the opcodes. Not only is FB disabled,
but the host is prevented from touching the GPU. An upcoming patch for
Kepler will also halt PFIFO (as NVIDIA does).
Emil Velikov [Mon, 8 Sep 2014 19:27:57 +0000 (20:27 +0100)]
drm/nouveau/gpio: rename g92 class to g94
nv92 hardware has only 16 interrupt lines, while nv94 and later
has 32. Accessing 0xe0c{0,4} registers on nv92 can lead to incorrect
PDISP setup. This is a regression introduced with
Ben Skeggs [Mon, 8 Sep 2014 03:38:02 +0000 (13:38 +1000)]
drm/gk104-/fb/ram: use parsed timing data in mr routines
All the other chipsets should be moved over to this too. It's not needed
yet for the upcoming commits, so left this step as it'll conflict badly
with Roy's GT21x reclocking work.
Pierre Moreau [Mon, 18 Aug 2014 20:43:24 +0000 (22:43 +0200)]
drm/nouveau: Display Nouveau boot options at launch
It can help to remove any ambiguity about which options were passed to Nouveau,
especially in case the user had some options set in /etc/modprobe.d/*.conf that
he forgot about, as they won't appear in a dmesg.
Signed-off-by: Pierre Moreau <pierre.morrow@free.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Martin Peres [Sun, 17 Aug 2014 15:33:10 +0000 (17:33 +0200)]
drm/nouveau/pwr: fix the timers implementation with concurent processes
The problem with the current implementation is that adding a timer improperly
checked which process would time up first by not taking into account how much
time elapsed since their timer got scheduled. Rework the re-scheduling
decision t fix this.
The catch with this fix is that we are limited to scheduling timers of up to
2^31 ticks to avoid any potential overflow. Since we are unlikely to need to
wait for more than a second, this won't be a problem :)
Another possible fix would be to decrement the timeouts of all processes but
it would duplicate a lot of code and dealing with edge cases wasn't pretty
last time I checked.
Signed-off-by: Martin Peres <martin.peres@free.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 12 Aug 2014 03:54:37 +0000 (13:54 +1000)]
drm/nouveau/core/mm: fill in holes with "allocated" nodes
The allocation algorithm doesn't expect there to be holes in the mm, which
causes its alignment/cutoff calculations to choke (and go negative) when
encountering the last chunk of a block before a hole.
The least expensive solution is to simply fill in any holes with nodes
that are pre-marked as being allocated.
Dave Airlie [Mon, 15 Sep 2014 09:55:55 +0000 (19:55 +1000)]
Merge tag 'topic/core-stuff-2014-09-15' of git://anongit.freedesktop.org/drm-intel into drm-next
Here's the updated topic/core-stuff pull request with the two patches
already merged into drm-fixes dropped.
* tag 'topic/core-stuff-2014-09-15' of git://anongit.freedesktop.org/drm-intel:
drm: Drop modeset locking from crtc init function
drm/i915/hdmi: Enable pipe pixel replication for SD interlaced modes
drm/edid: Reduce horizontal timings for pixel replicated modes
drm: Include task->name and master status in debugfs clients info
drm/gem: Fix kerneldoc typo
drm: use c99 initializers in structures
drm: fix drm_modeset_lock.h kernel-doc notation
Laurent Pinchart [Tue, 26 Aug 2014 22:42:56 +0000 (00:42 +0200)]
drm/rcar-du: Use struct videomode in platform data
In preparation for DT support where panel timings will be described by a
DRM-agnostic video mode, replace the struct drm_mode_modeinfo instance
in the panel platform data with a struct videomode.
Laurent Pinchart [Wed, 27 Aug 2014 16:26:39 +0000 (18:26 +0200)]
video: Add DT bindings for the R-Car Display Unit
Aside of the usual boring core properties (compatible, reg, interrupts
and clocks), the bindings use the OF graph bindings to model connections
between the DU output video ports and the on-board and off-board
components.
projects / linux-beck.git / log