Jaegeuk Kim [Sat, 6 Feb 2016 03:37:27 +0000 (19:37 -0800)]
f2fs crypto: check for too-short encrypted file names
This patch adopts:
ext4 crypto: check for too-short encrypted file names
An encrypted file name should never be shorter than an 16 bytes, the
AES block size. The 3.10 crypto layer will oops and crash the kernel
if ciphertext shorter than the block size is passed to it.
Fortunately, in modern kernels the crypto layer will not crash the
kernel in this scenario, but nevertheless, it represents a corrupted
directory, and we should detect it and mark the file system as
corrupted so that e2fsck can fix this.
Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Jaegeuk Kim [Sat, 6 Feb 2016 03:34:31 +0000 (19:34 -0800)]
f2fs crypto: f2fs_page_crypto() doesn't need a encryption context
This patch adopts:
ext4 crypto: ext4_page_crypto() doesn't need a encryption context
Since ext4_page_crypto() doesn't need an encryption context (at least
not any more), this allows us to simplify a number function signature
and also allows us to avoid needing to allocate a context in
ext4_block_write_begin(). It also means we no longer need a separate
ext4_decrypt_one() function.
Signed-off-by: Theodore Ts'o <tytso@mit.edu> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Jaegeuk Kim [Mon, 8 Feb 2016 22:17:38 +0000 (14:17 -0800)]
f2fs: increase i_size to avoid missing data
When finsert is doing with dirting pages, we should increase i_size right away.
Otherwise, the moved page is able to be dropped by the following
filemap_write_and_wait_range before updating i_size.
Especially, it can be done by
if ((page->index >= end_index + 1) || !offset)
goto out;
in f2fs_write_data_page.
This should resolve the below xfstests/091 failure reported by Dave.
$ diff -u tests/generic/091.out /home/dave/src/xfstests-dev/results//f2fs/generic/091.out.bad
--- tests/generic/091.out 2014-01-20 16:57:33.000000000 +1100
+++ /home/dave/src/xfstests-dev/results//f2fs/generic/091.out.bad 2016-02-08 15:21:02.701375087 +1100
@@ -1,7 +1,18 @@
QA output created by 091
fsx -N 10000 -l 500000 -r PSIZE -t BSIZE -w BSIZE -Z -R -W
-fsx -N 10000 -o 8192 -l 500000 -r PSIZE -t BSIZE -w BSIZE -Z -R -W
-fsx -N 10000 -o 32768 -l 500000 -r PSIZE -t BSIZE -w BSIZE -Z -R -W
-fsx -N 10000 -o 8192 -l 500000 -r PSIZE -t BSIZE -w BSIZE -Z -R -W
-fsx -N 10000 -o 32768 -l 500000 -r PSIZE -t BSIZE -w BSIZE -Z -R -W
-fsx -N 10000 -o 128000 -l 500000 -r PSIZE -t BSIZE -w BSIZE -Z -W
+mapped writes DISABLED
+skipping insert range behind EOF
+skipping insert range behind EOF
+truncating to largest ever: 0x11e00
+dowrite: write: Invalid argument
+LOG DUMP (7 total operations):
+1( 1 mod 256): SKIPPED (no operation)
+2( 2 mod 256): SKIPPED (no operation)
+3( 3 mod 256): FALLOC 0x2e0f2 thru 0x3134a (0x3258 bytes) PAST_EOF
+4( 4 mod 256): SKIPPED (no operation)
+5( 5 mod 256): SKIPPED (no operation)
+6( 6 mod 256): TRUNCATE UP from 0x0 to 0x11e00
+7( 7 mod 256): WRITE 0x73400 thru 0x79fff (0x6c00 bytes) HOLE
+Log of operations saved to "/mnt/test/junk.fsxops"; replay with --replay-ops
+Correct content saved for comparison
+(maybe hexdump "/mnt/test/junk" vs "/mnt/test/junk.fsxgood")
Reported-by: Dave Chinner <david@fromorbit.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Jaegeuk Kim [Wed, 3 Feb 2016 21:49:44 +0000 (13:49 -0800)]
f2fs: preallocate blocks for buffered aio writes
This patch preallocates data blocks for buffered aio writes.
With this patch, we can avoid redundant locking and unlocking of node pages
given consecutive aio request.
Chao Yu [Mon, 18 Jan 2016 10:28:11 +0000 (18:28 +0800)]
f2fs: introduce f2fs_submit_merged_bio_cond
f2fs use single bio buffer per type data (META/NODE/DATA) for caching
writes locating in continuous block address as many as possible, after
submitting, these writes may be still cached in bio buffer, so we have
to flush cached writes in bio buffer by calling f2fs_submit_merged_bio.
Unfortunately, in the scenario of high concurrency, bio buffer could be
flushed by someone else before we submit it as below reasons:
a) there is no space in bio buffer.
b) add a request of different type (SYNC, ASYNC).
c) add a discontinuous block address.
For this condition, f2fs_submit_merged_bio will be devastating, because
it could break the following merging of writes in bio buffer, split one
big bio into two smaller one.
This patch introduces f2fs_submit_merged_bio_cond which can do a
conditional submitting with bio buffer, before submitting it will judge
whether:
- page in DATA type bio buffer is matching with specified page;
- page in DATA type bio buffer is belong to specified inode;
- page in NODE type bio buffer is belong to specified inode;
If there is no eligible page in bio buffer, we will skip submitting step,
result in gaining more chance to merge consecutive block IOs in bio cache.
Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Jaegeuk Kim [Thu, 28 Jan 2016 19:48:52 +0000 (11:48 -0800)]
f2fs: wait on page's writeback in writepages path
Likewise f2fs_write_cache_pages, let's do for node and meta pages too.
Especially, for node blocks, we should do this before marking its fsync
and dentry flags.
Chao Yu [Tue, 26 Jan 2016 07:42:58 +0000 (15:42 +0800)]
f2fs: speed up handling holes in fiemap
This patch makes f2fs_map_blocks supporting returning next potential
page offset which skips hole region in indirect tree of inode, and
use it to speed up fiemap in handling big hole case.
Test method:
xfs_io -f /mnt/f2fs/file -c "pwrite 1099511627776 4096"
time xfs_io -f /mnt/f2fs/file -c "fiemap -v"
Chao Yu [Tue, 26 Jan 2016 07:40:44 +0000 (15:40 +0800)]
f2fs: introduce get_next_page_offset to speed up SEEK_DATA
When seeking data in ->llseek, if we encounter a big hole which covers
several dnode pages, we will try to seek data from index of page which
is the first page of next dnode page, at most we could skip searching
(ADDRS_PER_BLOCK - 1) pages.
However it's still not efficient, because if our indirect/double-indirect
pointer are NULL, there are no dnode page locate in the tree indirect/
double-indirect pointer point to, it's not necessary to search the whole
region.
This patch introduces get_next_page_offset to calculate next page offset
based on current searching level and max searching level returned from
get_dnode_of_data, with this, we could skip searching the entire area
indirect or double-indirect node block is not exist.
Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Chao Yu [Tue, 26 Jan 2016 07:39:35 +0000 (15:39 +0800)]
f2fs: remove unneeded pointer conversion
There are redundant pointer conversion in following call stack:
- at position a, inode was been converted to f2fs_file_info.
- at position b, f2fs_file_info was been converted to inode again.
Chao Yu [Tue, 26 Jan 2016 07:37:38 +0000 (15:37 +0800)]
f2fs: simplify f2fs_map_blocks
In f2fs_map_blocks, we use duplicated codes to handle first block mapping
and the following blocks mapping, it's unnecessary. This patch simplifies
f2fs_map_blocks to avoid using copied codes.
Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Shuoran Liu [Wed, 27 Jan 2016 01:57:30 +0000 (09:57 +0800)]
f2fs: introduce lifetime write IO statistics
This patch introduces lifetime IO write statistics exposed to the sysfs interface.
The write IO amount is obtained from block layer, accumulated in the file system and
stored in the hot node summary of checkpoint.
Signed-off-by: Shuoran Liu <liushuoran@huawei.com> Signed-off-by: Pengyang Hou <houpengyang@huawei.com>
[Jaegeuk Kim: add sysfs documentation] Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Hou Pengyang [Tue, 26 Jan 2016 12:56:25 +0000 (12:56 +0000)]
f2fs: reconstruct the code to free an extent_node
There are three steps to free an extent node:
1) list_del_init, 2)__detach_extent_node, 3) kmem_cache_free
In path f2fs_destroy_extent_tree, 1->2->3 to free a node,
But in path f2fs_update_extent_tree_range, it is 2->1->3.
This patch makes all the order to be: 1->2->3
It makes sense, since in the next patch, we import a victim list in the
path shrink_extent_tree, we could check if the extent_node is in the victim
list by checking the list_empty(). So it is necessary to put 1) first.
Signed-off-by: Hou Pengyang <houpengyang@huawei.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Fan Li [Wed, 3 Feb 2016 08:21:57 +0000 (16:21 +0800)]
f2fs: avoid unnecessary search while finding victim in gc
variable nsearched in get_victim_by_default() indicates the number of
dirty segments we already checked. There are 2 problems about the way
it updates:
1. When p.ofs_unit is greater than 1, the victim we find consists
of multiple segments, possibly more than 1 dirty segment.
But nsearched always increases by 1.
2. If segments have been found but not been chosen, nsearched won't
increase. So even we have checked all dirty segments, nsearched
may still less than p.max_search.
All these problems could cause unnecessary search after all dirty
segments have already been checked.
Signed-off-by: Fan li <fanofcode.li@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Jaegeuk Kim [Wed, 20 Jan 2016 15:43:51 +0000 (23:43 +0800)]
f2fs: use wait_for_stable_page to avoid contention
In write_begin, if storage supports stable_page, we don't need to wait for
writeback to update its contents.
This patch introduces to use wait_for_stable_page instead of
wait_on_page_writeback.
Chao Yu [Sat, 23 Jan 2016 08:23:55 +0000 (16:23 +0800)]
f2fs: enhance foreground GC
If we configure section consist of multiple segments, foreground GC will
do the garbage collection with following approach:
for each segment in victim section
blk_start_plug
for each valid block in segment
write out by OPU method
submit bio cache <---
blk_finish_plug <---
There are two issue:
1) for most of the time, 'submit bio cache' will break the merging in
current bio buffer from writes of next segments, making a smaller bio
submitting.
2) block plug only cover IO submitting in one segment, which reduce
opportunity of merging IOs in plug with multiple segments.
So refactor the code as below structure to strive for biggest
opportunity of merging IOs:
blk_start_plug
for each segment in victim section
for each valid block in segment
write out by OPU method
submit bio cache
blk_finish_plug
Test method:
1. mkfs.f2fs -s 8 /dev/sdX
2. touch 32 files
3. write 2M data into each file
4. punch 1.5M data from offset 0 for each file
5. trigger foreground gc through ioctl
Before patch, there are totoally 40 bios submitted.
f2fs_submit_write_bio: dev = (8,32), WRITE_SYNC, DATA, sector = 65536, size = 122880
f2fs_submit_write_bio: dev = (8,32), WRITE_SYNC, DATA, sector = 65776, size = 122880
f2fs_submit_write_bio: dev = (8,32), WRITE_SYNC, DATA, sector = 66016, size = 122880
f2fs_submit_write_bio: dev = (8,32), WRITE_SYNC, DATA, sector = 66256, size = 122880
f2fs_submit_write_bio: dev = (8,32), WRITE_SYNC, DATA, sector = 66496, size = 32768
----repeat for 8 times
After patch, there are totally 35 bios submitted.
f2fs_submit_write_bio: dev = (8,32), WRITE_SYNC, DATA, sector = 65536, size = 122880
----repeat 34 times
f2fs_submit_write_bio: dev = (8,32), WRITE_SYNC, DATA, sector = 73696, size = 16384
Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Jaegeuk Kim [Mon, 25 Jan 2016 22:31:58 +0000 (14:31 -0800)]
f2fs: don't need to call set_page_dirty for io error
If end_io gets an error, we don't need to set the page as dirty, since we
already set f2fs_stop_checkpoint which will not flush any data.
This will resolve the following warning.
======================================================
[ INFO: HARDIRQ-safe -> HARDIRQ-unsafe lock order detected ]
4.4.0+ #9 Tainted: G O
------------------------------------------------------
xfs_io/26773 [HC0[0]:SC0[0]:HE0:SE1] is trying to acquire:
(&(&sbi->inode_lock[i])->rlock){+.+...}, at: [<ffffffffc025483f>] update_dirty_page+0x6f/0xd0 [f2fs]
and this task is already holding:
(&(&q->__queue_lock)->rlock){-.-.-.}, at: [<ffffffff81396ea2>] blk_queue_bio+0x422/0x490
which would create a new lock dependency:
(&(&q->__queue_lock)->rlock){-.-.-.} -> (&(&sbi->inode_lock[i])->rlock){+.+...}
Jaegeuk Kim [Wed, 20 Jan 2016 15:46:05 +0000 (23:46 +0800)]
f2fs: use writepages->lock for WB_SYNC_ALL
If there are many writepages calls by multiple threads in background, we don't
need to serialize to merge all the bios, since it's background.
In such the case, it'd better to run writepages concurrently.
Chao Yu [Fri, 22 Jan 2016 09:42:06 +0000 (17:42 +0800)]
f2fs: correct search area in get_new_segment
get_new_segment starts from current segment position, tries to search a
free segment among its right neighbors locate in same section.
But previously our search area was set as [current segment, max segment],
which means we have to search to more bits in free_segmap bitmap for some
worse cases. So here we correct the search area to [current segment, last
segment in section] to avoid unnecessary searching.
Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Chao Yu [Mon, 18 Jan 2016 10:32:58 +0000 (18:32 +0800)]
f2fs: export dirty_nats_ratio in sysfs
This patch exports a new sysfs entry 'dirty_nat_ratio' to control threshold
of dirty nat entries, if current ratio exceeds configured threshold,
checkpoint will be triggered in f2fs_balance_fs_bg for flushing dirty nats.
Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Chao Yu [Mon, 18 Jan 2016 10:31:18 +0000 (18:31 +0800)]
f2fs: flush dirty nat entries when exceeding threshold
When testing f2fs with xfstest, generic/251 is stuck for long time,
the case uses below serials to obtain fresh released space in device,
in order to prepare for following fstrim test.
During preparing step, all nat entries will be cached in nat cache,
most of them are dirty entries with invalid blkaddr, which means
nodes related to these entries have been truncated, and they could
be reused after the dirty entries been checkpointed.
However, there was no checkpoint been triggered, so nid allocators
(e.g. mkdir, creat) will run into long journey of iterating all NAT
pages, looking for free nids in alloc_nid->build_free_nids.
Here, in f2fs_balance_fs_bg we give another chance to do checkpoint
to flush nat entries for reusing them in free nid cache when dirty
entry count exceeds 10% of max count.
Signed-off-by: Chao Yu <chao2.yu@samsung.com> Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
Linus Torvalds [Mon, 22 Feb 2016 22:09:18 +0000 (14:09 -0800)]
Merge tag 'trace-fixes-v4.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Two more small fixes.
One is by Yang Shi who added a READ_ONCE_NOCHECK() to the scan of the
stack made by the stack tracer. As the stack tracer scans the entire
kernel stack, KASAN triggers seeing it as a "stack out of bounds"
error. As the scan is looking at the contents of the stack from
parent functions. The NOCHECK() tells KASAN that this is done on
purpose, and is not some kind of stack overflow.
The second fix is to the ftrace selftests, to retrieve the PID of
executed commands from the shell with '$!' and not by parsing 'jobs'"
* tag 'trace-fixes-v4.5-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing, kasan: Silence Kasan warning in check_stack of stack_tracer
ftracetest: Fix instance test to use proper shell command for pids
Linus Torvalds [Mon, 22 Feb 2016 21:57:01 +0000 (13:57 -0800)]
Merge tag 'for-linus-4.5-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen bug fixes from David Vrabel:
- Two scsiback fixes (resource leak and spurious warning).
- Fix DMA mapping of compound pages on arm/arm64.
- Fix some pciback regressions in MSI-X handling.
- Fix a pcifront crash due to some uninitialize state.
* tag 'for-linus-4.5-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/pcifront: Fix mysterious crashes when NUMA locality information was extracted.
xen/pcifront: Report the errors better.
xen/pciback: Save the number of MSI-X entries to be copied later.
xen/pciback: Check PF instead of VF for PCI_COMMAND_MEMORY
xen: fix potential integer overflow in queue_reply
xen/arm: correctly handle DMA mapping of compound pages
xen/scsiback: avoid warnings when adding multiple LUNs to a domain
xen/scsiback: correct frontend counting
Pull networking fixes from David Miller:
"Looks like a lot, but mostly driver fixes scattered all over as usual.
Of note:
1) Add conditional sched in nf conntrack in cleanup to avoid NMI
watchdogs. From Florian Westphal.
2) Fix deadlock in nfnetlink cttimeout, also from Floarian.
3) Fix handling of slaves in bonding ARP monitor validation, from Jay
Vosburgh.
4) Callers of ip_cmsg_send() are responsible for freeing IP options,
some were not doing so. Fix from Eric Dumazet.
5) Fix per-cpu bugs in mvneta driver, from Gregory CLEMENT.
6) Fix vlan handling in mv88e6xxx DSA driver, from Vivien Didelot.
7) bcm7xxx PHY driver bug fixes from Florian Fainelli.
8) Avoid unaligned accesses to protocol headers wrt. GRE, from
Alexander Duyck.
9) SKB leaks and other problems in arc_emac driver, from Alexander
Kochetkov.
10) tcp_v4_inbound_md5_hash() releases listener socket instead of
request socket on error path, oops. Fix from Eric Dumazet.
11) Missing socket release in pppoe_rcv_core() that seems to have
existed basically forever. From Guillaume Nault.
12) Missing slave_dev unregister in dsa_slave_create() error path,
from Florian Fainelli.
13) crypto_alloc_hash() never returns NULL, fix return value check in
__tcp_alloc_md5sig_pool. From Insu Yun.
14) Properly expire exception route entries in ipv4, from Xin Long.
15) Fix races in tcp/dccp listener socket dismantle, from Eric
Dumazet.
16) Don't set IFF_TX_SKB_SHARING in vxlan, geneve, or GRE, it's not
legal. These drivers modify the SKB on transmit. From Jiri Benc.
17) Fix regression in the initialziation of netdev->tx_queue_len.
From Phil Sutter.
18) Missing unlock in tipc_nl_add_bc_link() error path, from Insu Yun.
19) SCTP port hash sizing does not properly ensure that table is a
power of two in size. From Neil Horman.
20) Fix initializing of software copy of MAC address in fmvj18x_cs
driver, from Ken Kawasaki"
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (129 commits)
bnx2x: Fix 84833 phy command handler
bnx2x: Fix led setting for 84858 phy.
bnx2x: Correct 84858 PHY fw version
bnx2x: Fix 84833 RX CRC
bnx2x: Fix link-forcing for KR2
net: ethernet: davicom: fix devicetree irq resource
fmvj18x_cs: fix incorrect indexing of dev->dev_addr[] when copying the MAC address
Driver: Vmxnet3: Update Rx ring 2 max size
net: netcp: rework the code for get/set sw_data in dma desc
soc: ti: knav_dma: rename pad in struct knav_dma_desc to sw_data
net: ti: netcp: restore get/set_pad_info() functionality
MAINTAINERS: Drop myself as xen netback maintainer
sctp: Fix port hash table size computation
can: ems_usb: Fix possible tx overflow
Bluetooth: hci_core: Avoid mixing up req_complete and req_complete_skb
net: bcmgenet: Fix internal PHY link state
af_unix: Don't use continue to re-execute unix_stream_read_generic loop
unix_diag: fix incorrect sign extension in unix_lookup_by_ino
bnxt_en: Failure to update PHY is not fatal condition.
bnxt_en: Remove unnecessary call to update PHY settings.
...
Linus Torvalds [Mon, 22 Feb 2016 20:04:11 +0000 (12:04 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma fixes from Doug Ledford:
"One ocrdma fix:
- The new CQ API support was added to ocrdma, but they got the arming
logic wrong, so without this, transfers eventually fail when they
fail to arm the interrupt properly under load
Two related fixes for mlx4:
- When we added the 64bit extended counters support to the core IB
code, they forgot to update the RoCE side of the mlx4 driver (the
IB side they properly updated).
I debated whether or not to include these patches as they could be
considered feature enablement patches, but the existing code will
blindy copy the 32bit counters, whether any counters were requested
at all (a bug).
These two patches make it (a) check to see that counters were
requested and (b) copy the right counters (the 64bit support is
new, the 32bit is not). For that reason I went ahead and took
them"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
IB/mlx4: Add support for the port info class for RoCE ports
IB/mlx4: Add support for extended counters over RoCE ports
RDMA/ocrdma: Fix arm logic to align with new cq API
Linus Torvalds [Mon, 22 Feb 2016 19:55:18 +0000 (11:55 -0800)]
Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Some bugfixes from I2C for you:
A fix for a RuntimePM regression with OMAP, a fix to enable TCO for
Lewisburg platforms, and a typo fix while we are here"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: i801: Adding Intel Lewisburg support for iTCO
i2c: uniphier: fix typos in error messages
i2c: omap: Fix PM regression with deferred probe for pm_runtime_reinit
Yuval Mintz [Sun, 21 Feb 2016 13:07:26 +0000 (15:07 +0200)]
bnx2x: Fix 84833 RX CRC
There's a problem in current 84833 phy configuration -
in case 1Gb link is configured and jumbo-sized packets are being
used, device will experience RX crc errors.
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The dm9000 driver doesn't work in at least one device-tree
configuration, spitting an error message on irq resource :
[Â Â Â Â 1.062495] dm9000 8000000.ethernet: insufficient resources
[Â Â Â Â 1.068439] dm9000 8000000.ethernet: not found (-2).
[Â Â Â Â 1.073451] dm9000: probe of 8000000.ethernet failed with error -2
The reason behind is that the interrupt might be provided by a gpio
controller, not probed when dm9000 is probed, and needing the probe
deferral mechanism to apply.
Currently, the interrupt is directly taken from resources. This patch
changes this to use the more generic platform_get_irq(), which handles
the deferral.
Moreover, since commit Fixes: 7085a7401ba5 ("drivers: platform: parse
IRQ flags from resources"), the interrupt trigger flags are honored in
platform_get_irq(), so remove the needless code in dm9000.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Marcel Ziswiler <marcel@ziswiler.com> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Tested-by: Sergei Ianovich <ynvich@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Shrikrishna Khare <skhare@vmware.com> Signed-off-by: Bhavesh Davda <bhavesh@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This series fixes a regression and add some improvements for the ease
of maintainance. Incorporated comments against v1.
Changelogs:
v2 : combined 2-3 into one patch as this involves a header change
fixed a parse warning in 3/4 per comment from Arnd.
Removed Sign-off from Arnd against 1/4
added comments in 3/3 to alert on the usage of sw data per review
comments
v1 : added 2-4 to accomodate feedback received from review
v0 : initial version to fix the regression (From Grygorii)
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
net: netcp: rework the code for get/set sw_data in dma desc
SW data field in descriptor can be used by software to hold private
data for the driver. As there are 4 words available for this purpose,
use separate macros to place it or retrieve the same to/from
descriptors. Also do type cast of data types accordingly.
Cc: Wingman Kwok <w-kwok2@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> CC: Arnd Bergmann <arnd@arndb.de> CC: Grygorii Strashko <grygorii.strashko@ti.com> CC: David Laight <David.Laight@ACULAB.COM> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
soc: ti: knav_dma: rename pad in struct knav_dma_desc to sw_data
Rename the pad to sw_data as per description of this field in the hardware
spec(refer sprugr9 from www.ti.com). Latest version of the document is
at http://www.ti.com/lit/ug/sprugr9h/sprugr9h.pdf and section 3.1
Host Packet Descriptor describes this field.
Define and use a constant for the size of sw_data field similar to
other fields in the struct for desc and document the sw_data field
in the header. As the sw_data is not touched by hw, it's type can be
changed to u32.
Rename the helpers to match with the updated dma desc field sw_data.
Cc: Wingman Kwok <w-kwok2@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> CC: Arnd Bergmann <arnd@arndb.de> CC: Grygorii Strashko <grygorii.strashko@ti.com> CC: David Laight <David.Laight@ACULAB.COM> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
The commit 899077791403 ("netcp: try to reduce type confusion in
descriptors") introduces a regression in Kernel 4.5-rc1 and it breaks
get/set_pad_info() functionality.
The TI NETCP driver uses pad0 and pad1 fields of knav_dma_desc to
store DMA/MEM buffer pointer and buffer size respectively. And in both
cases for Keystone 2 the pointer type size is 32 bit regardless of
LAPE enabled or not, because CONFIG_ARCH_DMA_ADDR_T_64BIT originally
is not expected to be defined.
Unfortunately, above commit changed buffer's pointers save/restore
code (get/set_pad_info()) and added intermediate conversation to u64
which works incorrectly on 32bit Keystone 2 and causes TI NETCP driver
crash in RX/TX path due to "Unable to handle kernel NULL pointer"
exception. This issue was reported and discussed in [1].
Hence, fix it by partially reverting above commit and restoring
get/set_pad_info() functionality as it was before.
[1] https://www.mail-archive.com/netdev@vger.kernel.org/msg95361.html Cc: Wingman Kwok <w-kwok2@ti.com> Cc: Mugunthan V N <mugunthanvnm@ti.com> CC: David Laight <David.Laight@ACULAB.COM> CC: Arnd Bergmann <arnd@arndb.de> Reported-by: Franklin S Cooper Jr <fcooper@ti.com> Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Murali Karicheri <m-karicheri2@ti.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net>
Ian Campbell [Fri, 19 Feb 2016 11:44:51 +0000 (11:44 +0000)]
MAINTAINERS: Drop myself as xen netback maintainer
Wei has been picking this up for quite a while now.
Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Cc: Wei Liu <wei.liu2@citrix.com> Acked-by: Wei Liu <wei.liu2@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Neil Horman [Thu, 18 Feb 2016 21:10:57 +0000 (16:10 -0500)]
sctp: Fix port hash table size computation
Dmitry Vyukov noted recently that the sctp_port_hashtable had an error in
its size computation, observing that the current method never guaranteed
that the hashsize (measured in number of entries) would be a power of two,
which the input hash function for that table requires. The root cause of
the problem is that two values need to be computed (one, the allocation
order of the storage requries, as passed to __get_free_pages, and two the
number of entries for the hash table). Both need to be ^2, but for
different reasons, and the existing code is simply computing one order
value, and using it as the basis for both, which is wrong (i.e. it assumes
that ((1<<order)*PAGE_SIZE)/sizeof(bucket) is still ^2 when its not).
To fix this, we change the logic slightly. We start by computing a goal
allocation order (which is limited by the maximum size hash table we want
to support. Then we attempt to allocate that size table, decreasing the
order until a successful allocation is made. Then, with the resultant
successful order we compute the number of buckets that hash table supports,
which we then round down to the nearest power of two, giving us the number
of entries the table actually supports.
I've tested this locally here, using non-debug and spinlock-debug kernels,
and the number of entries in the hashtable consistently work out to be
powers of two in all cases.
Signed-off-by: Neil Horman <nhorman@tuxdriver.com> Reported-by: Dmitry Vyukov <dvyukov@google.com> CC: Dmitry Vyukov <dvyukov@google.com> CC: Vladislav Yasevich <vyasevich@gmail.com> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes the problem that more CAN messages could be sent to the
interface as could be send on the CAN bus. This was more likely for slow baud
rates. The sleeping _start_xmit was woken up in the _write_bulk_callback. Under
heavy TX load this produced another bulk transfer without checking the
free_slots variable and hence caused the overflow in the interface.
Signed-off-by: Gerhard Uttenthaler <uttenthaler@ems-wuensche.com> Cc: linux-stable <stable@vger.kernel.org> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Linus Torvalds [Sat, 20 Feb 2016 17:32:40 +0000 (09:32 -0800)]
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"This is unusually large, partly due to the EFI fixes that prevent
accidental deletion of EFI variables through efivarfs that may brick
machines. These fixes are somewhat involved to maintain compatibility
with existing install methods and other usage modes, while trying to
turn off the 'rm -rf' bricking vector.
Other fixes are for large page ioremap()s and for non-temporal
user-memcpy()s"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Fix vmalloc_fault() to handle large pages properly
hpet: Drop stale URLs
x86/uaccess/64: Handle the caching of 4-byte nocache copies properly in __copy_user_nocache()
x86/uaccess/64: Make the __copy_user_nocache() assembly code more readable
lib/ucs2_string: Correct ucs2 -> utf8 conversion
efi: Add pstore variables to the deletion whitelist
efi: Make efivarfs entries immutable by default
efi: Make our variable validation list include the guid
efi: Do variable name validation tests in utf8
efi: Use ucs2_as_utf8 in efivarfs instead of open coding a bad version
lib/ucs2_string: Add ucs2 -> utf8 helper functions
Linus Torvalds [Sat, 20 Feb 2016 17:30:42 +0000 (09:30 -0800)]
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"A handful of CPU hotplug related fixes"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/core: Plug potential memory leak in CPU_UP_PREPARE
perf/core: Remove the bogus and dangerous CPU_DOWN_FAILED hotplug state
perf/core: Remove bogus UP_CANCELED hotplug state
perf/x86/amd/uncore: Plug reference leak
Linus Torvalds [Sat, 20 Feb 2016 17:22:11 +0000 (09:22 -0800)]
Merge tag 'powerpc-4.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Fix build error on 32-bit with checkpoint restart from Aneesh Kumar
- Fix dedotify for binutils >= 2.26 from Andreas Schwab
- Don't trace hcalls on offline CPUs from Denis Kirjanov
- eeh: Fix stale cached primary bus from Gavin Shan
- eeh: Fix stale PE primary bus from Gavin Shan
- mm: Fix Multi hit ERAT cause by recent THP update from Aneesh Kumar K.V
- ioda: Set "read" permission when "write" is set from Alexey Kardashevskiy
* tag 'powerpc-4.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/ioda: Set "read" permission when "write" is set
powerpc/mm: Fix Multi hit ERAT cause by recent THP update
powerpc/powernv: Fix stale PE primary bus
powerpc/eeh: Fix stale cached primary bus
powerpc/pseries: Don't trace hcalls on offline CPUs
powerpc: Fix dedotify for binutils >= 2.26
powerpc/book3s_32: Fix build error with checkpoint restart
Linus Torvalds [Sat, 20 Feb 2016 17:19:56 +0000 (09:19 -0800)]
Merge tag 'dmaengine-fix-4.5-rc5' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
"A few fixes for drivers, nothing major here.
Fixes are: iotdma fix to restart channels, new ID for wildcat PCH,
residue fix for edma, disable irq for non-cyclic in dw"
* tag 'dmaengine-fix-4.5-rc5' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: dw: disable BLOCK IRQs for non-cyclic xfer
dmaengine: edma: fix residue race for cyclic
dmaengine: dw: pci: add ID for WildcatPoint PCH
dmaengine: IOATDMA: fix timer code that continues to restart channels during idle
Linus Torvalds [Sat, 20 Feb 2016 17:16:51 +0000 (09:16 -0800)]
Merge tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk driver fixes from Stephen Boyd:
"An assortment of vendor specific clk drivers fixes, most notably
fallout from adding Tegra210 and rockchip rk3036/rk3368 drivers this
cycle.
There's also the random smattering of sparse/checker fixes, a build
"fix" to get the Tango clk driver to compile because the Kconfig
symbol was renamed after the fact, and a clk gpio fix for a patch
mismerge"
* tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (28 commits)
clk: gpio: Really allow an optional clock= DT property
Revert "clk: qcom: Specify LE device endianness"
clk: versatile: mask VCO bits before writing
clk: tegra: super: Fix sparse warnings for functions not declared as static
clk: tegra: Fix sparse warnings for functions not declared as static
clk: tegra: Fix sparse warning for pll_m
clk: tegra: Use definition for pll_u override bit
clk: tegra: Fix warning caused by pll_u failing to lock
clk: tegra: Fix clock sources for Tegra210 EMC
clk: tegra: Add the APB2APE audio clock on Tegra210
clk: tegra: Add missing of_node_put()
clk: tegra: Fix PLLE SS coefficients
clk: tegra: Fix typos around clearing PLLE bits during enable
clk: tegra: Do not disable PLLE when under hardware control
clk: tegra: Fix pllx dyn step calculation
clk: tegra: pll: Fix potential sleeping-while-atomic
clk: tegra: Fix the misnaming of nvenc from msenc
clk: tegra: Fix naming of MISC registers
clk: tango4: rename ARCH_TANGOX to ARCH_TANGO
clk: scpi: Fix checking return value of platform_device_register_simple()
...
Linus Torvalds [Sat, 20 Feb 2016 17:13:18 +0000 (09:13 -0800)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull more drm fixes from Dave Airlie:
"Some more fixes trickled in:
A bunch of VC4 ones since it's a pretty new driver not much chance of
regressions, and it fixes GPU resets.
Also one atomic fix, one set of fixes for a common bug in TTM cleanup,
and one i915 hotplug fix"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/nouveau: use post-decrement in error handling
drm/atomic: Allow for holes in connector state, v2.
drm/i915: Fix hpd live status bits for g4x
drm/vc4: Use runtime PM to power cycle the device when the GPU hangs.
drm/vc4: Enable runtime PM.
drm/vc4: Fix spurious GPU resets due to BO reuse.
drm/vc4: Drop error message on seqno wait timeouts.
drm/vc4: Fix -ERESTARTSYS error return from BO waits.
drm/vc4: Return an ERR_PTR from BO creation instead of NULL.
drm/vc4: Fix the clear color for the first tile rendered.
drm/vc4: Validate that WAIT_BO padding is cleared.
drm/radeon: use post-decrement in error handling
drm/amdgpu: use post-decrement in error handling
Simon Guinot [Wed, 9 Sep 2015 22:15:18 +0000 (00:15 +0200)]
kernel/resource.c: fix muxed resource handling in __request_region()
In __request_region, if a conflict with a BUSY and MUXED resource is
detected, then the caller goes to sleep and waits for the resource to be
released. A pointer on the conflicting resource is kept. At wake-up
this pointer is used as a parent to retry to request the region.
A first problem is that this pointer might well be invalid (if for
example the conflicting resource have already been freed). Another
problem is that the next call to __request_region() fails to detect a
remaining conflict. The previously conflicting resource is passed as a
parameter and __request_region() will look for a conflict among the
children of this resource and not at the resource itself. It is likely
to succeed anyway, even if there is still a conflict.
Instead, the parent of the conflicting resource should be passed to
__request_region().
As a fix, this patch doesn't update the parent resource pointer in the
case we have to wait for a muxed region right after.
Reported-and-tested-by: Vincent Pelletier <plr.vincent@gmail.com> Signed-off-by: Simon Guinot <simon.guinot@sequanux.org> Tested-by: Vincent Donnefort <vdonnefort@gmail.com> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Douglas Anderson [Fri, 19 Feb 2016 22:25:21 +0000 (14:25 -0800)]
Bluetooth: hci_core: Avoid mixing up req_complete and req_complete_skb
In commit 44d271377479 ("Bluetooth: Compress the size of struct
hci_ctrl") we squashed down the size of the structure by using a union
with the assumption that all users would use the flag to determine
whether we had a req_complete or a req_complete_skb.
Unfortunately we had a case in hci_req_cmd_complete() where we weren't
looking at the flag. This can result in a situation where we might be
storing a hci_req_complete_skb_t in a hci_req_complete_t variable, or
vice versa.
During some testing I found at least one case where the function
hci_req_sync_complete() was called improperly because the kernel thought
that it didn't require an SKB. Looking through the stack in kgdb I
found that it was called by hci_event_packet() and that
hci_event_packet() had both of its locals "req_complete" and
"req_complete_skb" pointing to the same place: both to
hci_req_sync_complete().
Let's make sure we always check the flag.
For more details on debugging done, see <http://crbug.com/588288>.
Fixes: 44d271377479 ("Bluetooth: Compress the size of struct hci_ctrl") Signed-off-by: Douglas Anderson <dianders@chromium.org> Acked-by: Johan Hedberg <johan.hedberg@intel.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Jaedon Shin [Fri, 19 Feb 2016 04:48:50 +0000 (13:48 +0900)]
net: bcmgenet: Fix internal PHY link state
The PHY link state is not chaged in GENETv2 caused by the previous
commit 49f7a471e4d1 ("net: bcmgenet: Properly configure PHY to ignore
interrupt") was set to PHY_IGNORE_INTERRUPT in bcmgenet_mii_probe().
The internal PHY should use phy_mac_interrupt() when not in use
PHY_POLL. The statement for phy_mac_interrupt() has two conditions. The
first condition to check GENET_HAS_MDIO_INTR is not related PHY link
state, so this patch removes it.
Fixes: 49f7a471e4d1 ("net: bcmgenet: Properly configure PHY to ignore interrupt") Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Rainer Weikusat [Thu, 18 Feb 2016 12:39:46 +0000 (12:39 +0000)]
af_unix: Don't use continue to re-execute unix_stream_read_generic loop
The unix_stream_read_generic function tries to use a continue statement
to restart the receive loop after waiting for a message. This may not
work as intended as the caller might use a recvmsg call to peek at
control messages without specifying a message buffer. If this was the
case, the continue will cause the function to return without an error
and without the credential information if the function had to wait for a
message while it had returned with the credentials otherwise. Change to
using goto to restart the loop without checking the condition first in
this case so that credentials are returned either way.
Signed-off-by: Rainer Weikusat <rweikusat@mobileactivedefense.com> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Dmitry V. Levin [Fri, 19 Feb 2016 01:27:48 +0000 (04:27 +0300)]
unix_diag: fix incorrect sign extension in unix_lookup_by_ino
The value passed by unix_diag_get_exact to unix_lookup_by_ino has type
__u32, but unix_lookup_by_ino's argument ino has type int, which is not
a problem yet.
However, when ino is compared with sock_i_ino return value of type
unsigned long, ino is sign extended to signed long, and this results
to incorrect comparison on 64-bit architectures for inode numbers
greater than INT_MAX.
This bug was found by strace test suite.
Fixes: 5d3cae8bc39d ("unix_diag: Dumping exact socket core") Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Sat, 20 Feb 2016 00:43:20 +0000 (19:43 -0500)]
bnxt_en: Remove unnecessary call to update PHY settings.
Fix bnxt_update_phy_setting() to check the correct parameters when
determining whether to update the PHY. Requested line speed/duplex should
only be checked for forced speed mode. This avoids unnecessary link
interruptions when loading the driver.
Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michael Chan [Sat, 20 Feb 2016 00:43:19 +0000 (19:43 -0500)]
bnxt_en: Poll link at the end of __bnxt_open_nic().
When shutting down the NIC, we shutdown async event processing before
freeing all the rings. If there is a link change event during reset, the
driver may miss it and the link state may be incorrect after the NIC is
re-opened. Poll the link at the end of __bnxt_open_nic() to get the
correct link status.
Signed-off-by Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nishanth Menon [Sat, 20 Feb 2016 00:09:51 +0000 (18:09 -0600)]
hwmon: (gpio-fan) Remove un-necessary speed_index lookup for thermal hook
Thermal hook gpio_fan_get_cur_state is only interested in knowing
the current speed index that was setup in the system, this is
already available as part of fan_data->speed_index which is always
set by set_fan_speed. Using get_fan_speed_index is useful when we
have no idea about the fan speed configuration (for example during
fan_ctrl_init).
When thermal framework invokes
gpio_fan_get_cur_state=>get_fan_speed_index via gpio_fan_get_cur_state
especially in a polled configuration for thermal governor, we
basically hog the i2c interface to the extent that other functions
fail to get any traffic out :(.
Instead, just provide the last state set in the driver - since the gpio
fan driver is responsible for the fan state immaterial of override, the
fan_data->speed_index should accurately reflect the state.
Linus Torvalds [Fri, 19 Feb 2016 21:44:12 +0000 (13:44 -0800)]
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 bugfixes from Ted Ts'o:
"Miscellaneous ext4 bug fixes for v4.5"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix crashes in dioread_nolock mode
ext4: fix bh->b_state corruption
ext4: fix memleak in ext4_readdir()
ext4: remove unused parameter "newblock" in convert_initialized_extent()
ext4: don't read blocks from disk after extents being swapped
ext4: fix potential integer overflow
ext4: add a line break for proc mb_groups display
ext4: ioctl: fix erroneous return value
ext4: fix scheduling in atomic on group checksum failure
ext4 crypto: move context consistency check to ext4_file_open()
ext4 crypto: revalidate dentry after adding or removing the key
Linus Torvalds [Fri, 19 Feb 2016 21:40:42 +0000 (13:40 -0800)]
Merge branch 'for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs fix from Chris Mason:
"My for-linus-4.5 branch has a btrfs DIO error passing fix.
I know how much you love DIO, so I'm going to suggest against reading
it. We'll follow up with a patch to drop the error arg from
dio_end_io in the next merge window."
* 'for-linus-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: fix direct IO requests not reporting IO error to user space
Linus Torvalds [Fri, 19 Feb 2016 21:36:00 +0000 (13:36 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge fixes from Andrew Morton:
"10 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm: slab: free kmem_cache_node after destroy sysfs file
ipc/shm: handle removed segments gracefully in shm_mmap()
MAINTAINERS: update Kselftest Framework mailing list
devm_memremap_release(): fix memremap'd addr handling
mm/hugetlb.c: fix incorrect proc nr_hugepages value
mm, x86: fix pte_page() crash in gup_pte_range()
fsnotify: turn fsnotify reaper thread into a workqueue job
Revert "fsnotify: destroy marks with call_srcu instead of dedicated thread"
mm: fix regression in remap_file_pages() emulation
thp, dax: do not try to withdraw pgtable from non-anon VMA
Paul Bolle [Thu, 18 Feb 2016 20:29:08 +0000 (21:29 +0100)]
ser_gigaset: use container_of() instead of detour
The purpose of gigaset_device_release() is to kfree() the struct
ser_cardstate that contains our struct device. This is done via a bit of
a detour. First we make our struct device's driver_data point to the
container of our struct ser_cardstate (which is a struct cardstate). In
gigaset_device_release() we then retrieve that driver_data again. And
after that we finally kfree() the struct ser_cardstate that was saved in
the struct cardstate.
All of this can be achieved much easier by using container_of() to get
from our struct device to its container, struct ser_cardstate. Do so.
Note that at the time the detour was implemented commit b8b2c7d845d5
("base/platform: assert that dev_pm_domain callbacks are called
unconditionally") had just entered the tree. That commit disconnected
our platform_device and our platform_driver. These were reconnected
again in v4.5-rc2 through commit 25cad69f21f5 ("base/platform: Fix
platform drivers with no probe callback"). And one of the consequences
of that fix was that it broke the detour via driver_data. That's because
it made __device_release_driver() stop being a NOP for our struct device
and actually do stuff again. One of the things it now does, is setting
our driver_data to NULL. That, in turn, makes it impossible for
gigaset_device_release() to get to our struct cardstate. Which has the
net effect of leaking a struct ser_cardstate at every call of this
driver's tty close() operation. So using container_of() has the
additional benefit of actually working.
Reported-by: Dmitry Vyukov <dvyukov@google.com> Tested-by: Dmitry Vyukov <dvyukov@google.com> Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Tilman Schmidt <tilman@imap.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 19 Feb 2016 20:51:18 +0000 (15:51 -0500)]
Merge tag 'wireless-drivers-for-davem-2016-02-18' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
rtlwifi
* fix broken VHT (802.11ac) support, reported by Linus
wlcore
* fix firmware initialisation regression on wl1271
iwlwifi
* fix a race that users reported when we try to load the firmware
and the hardware rfkill interrupt triggers at the same time
* fix a very visible bug in scheduled scan: the firmware
doesn't support scheduled scan with no profile configured and
the supplicant sometimes requests such scheduled scans
* build system fix to be able to link iwlwifi statically into kernel
* firmware name update for 8265
* typo fix in return value
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Steve Wise [Thu, 18 Feb 2016 14:34:24 +0000 (06:34 -0800)]
cxgb3: fix up vpd strings for kstrto*()
The vpd strings are left justified, in a fixed length array, with possible
trailing white space and no NUL. So fix them up before calling kstrto*().
This is a recent regression which causes cxgb3 to fail to load.
Fixes: e72c932 ("cxgb3: Convert simple_strtoul to kstrtox") Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Paolo Abeni [Wed, 17 Feb 2016 18:30:01 +0000 (19:30 +0100)]
lwt: fix rx checksum setting for lwt devices tunneling over ipv6
the commit 35e2d1152b22 ("tunnels: Allow IPv6 UDP checksums to be
correctly controlled.") changed the default xmit checksum setting
for lwt vxlan/geneve ipv6 tunnels, so that now the checksum is not
set into external UDP header.
This commit changes the rx checksum setting for both lwt vxlan/geneve
devices created by openvswitch accordingly, so that lwt over ipv6
tunnel pairs are again able to communicate with default values.
Signed-off-by: Paolo Abeni <pabeni@redhat.com> Acked-by: Jiri Benc <jbenc@redhat.com> Acked-by: Jesse Gross <jesse@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 19 Feb 2016 20:35:29 +0000 (15:35 -0500)]
Merge tag 'batman-adv-fix-for-davem' of git://git.open-mesh.org/linux-merge
Antonio Quartulli says:
====================
Two of the fixes included in this patchset prevent wrong memory
access - it was triggered when removing an object from a list
after it was already free'd due to bad reference counting.
This misbehaviour existed for both the gw_node and the
orig_node_vlan object and has been fixed by Sven Eckelmann.
The last patch fixes our interface feasibility check and prevents
it from looping indefinitely when two net_device objects
reference each other via iflink index (i.e. veth pair), by
Andrew Lunn
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Anton Protopopov [Wed, 17 Feb 2016 02:43:16 +0000 (21:43 -0500)]
rtnl: RTM_GETNETCONF: fix wrong return value
An error response from a RTM_GETNETCONF request can return the positive
error value EINVAL in the struct nlmsgerr that can mislead userspace.
Signed-off-by: Anton Protopopov <a.s.protopopov@gmail.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: make netdev_for_each_lower_dev safe for device removal
When I used netdev_for_each_lower_dev in commit bad531623253 ("vrf:
remove slave queue and private slave struct") I thought that it acts
like netdev_for_each_lower_private and can be used to remove the current
device from the list while walking, but unfortunately it acts more like
netdev_for_each_lower_private_rcu and doesn't allow it. The difference
is where the "iter" points to, right now it points to the current element
and that makes it impossible to remove it. Change the logic to be
similar to netdev_for_each_lower_private and make it point to the "next"
element so we can safely delete the current one. VRF is the only such
user right now, there's no change for the read-only users.
CC: David Ahern <dsa@cumulusnetworks.com> CC: David S. Miller <davem@davemloft.net> CC: Roopa Prabhu <roopa@cumulusnetworks.com> CC: Vlad Yasevich <vyasevic@redhat.com> Fixes: bad531623253 ("vrf: remove slave queue and private slave struct") Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Reviewed-by: David Ahern <dsa@cumulusnetworks.com> Tested-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The stacker tracer traverses the whole kernel stack when saving the max stack
trace. It may touch the stack red zones to cause the warning. So, just disable
the instrumentation to silence the warning.
Steven Rostedt [Fri, 11 Dec 2015 19:36:17 +0000 (14:36 -0500)]
ftracetest: Fix instance test to use proper shell command for pids
The ftracetest instance test used parsing of the "jobs" output to find the
pid of the subshell that is executed previously. But this is not portable to
all major shells that may run these tests. The proper way to get the pid of
the subshell is the shell command "$!". This will return the pid of the
previously executed command. Use that instead, otherwise the test does not
work in all environments.
Linus Torvalds [Fri, 19 Feb 2016 16:40:05 +0000 (08:40 -0800)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"Here are some more arm64 fixes for 4.5. This has mostly come from
Yang Shi, who saw some issues under -rt that also affect mainline.
The rest of it is pretty small, but still worth having.
We've got an old issue outstanding with valid_user_regs which will
likely wait until 4.6 (since it would really benefit from some time in
-next) and another issue with kasan and idle which should be fixed
next week.
Apart from that, pretty quiet here (and still no sign of the THP issue
reported on s390...)
Summary:
- Allow EFI stub to use strnlen(), which is required by recent libfdt
- Avoid smp_processor_id() in preempt context during unwinding
- Avoid false Kasan warnings during unwinding
- Ensure early devices are picked up by the IOMMU DMA ops
- Avoid rebuilding the kernel for the 'install' target
- Run fixup handlers for alignment faults on userspace access"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mm: allow the kernel to handle alignment faults on user accesses
arm64: kbuild: make "make install" not depend on vmlinux
arm64: dma-mapping: fix handling of devices registered before arch_initcall
arm64/efi: Make strnlen() available to the EFI namespace
arm/arm64: crypto: assure that ECB modes don't require an IV
arm64: make irq_stack_ptr more robust
arm64: debug: re-enable irqs before sending breakpoint SIGTRAP
arm64: disable kasan when accessing frame->fp in unwind_frame
Linus Torvalds [Fri, 19 Feb 2016 16:33:12 +0000 (08:33 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
"Several bug fixes:
- There are four different stack tracers, and three of them have
bugs. For 4.5 the bugs are fixed and we prepare a cleanup patch
for the next merge window.
- Three bug fixes for the dasd driver in regard to parallel access
volumes and the new max_dev_sectors block device queue limit
- The irq restore optimization needs a fixup for memcpy_real
- The diagnose trace code has a conflict with lockdep"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/dasd: fix performance drop
s390/maccess: reduce stnsm instructions
s390/diag: avoid lockdep recursion
s390/dasd: fix refcount for PAV reassignment
s390/dasd: prevent incorrect length error under z/VM after PAV changes
s390: fix DAT off memory access, e.g. on kdump
s390/oprofile: fix address range for asynchronous stack
s390/perf_event: fix address range for asynchronous stack
s390/stacktrace: add save_stack_trace_regs()
s390/stacktrace: save full stack traces
s390/stacktrace: add missing end marker
s390/stacktrace: fix address ranges for asynchronous and panic stack
s390/stacktrace: fix save_stack_trace_tsk() for current task
projects / linux-beck.git / log