staging: comedi: fix return value for insn_bits functions
The comedi_subdevice 'insn_bits' functions return the number of data
elements used to perform the command. Most of the insn_bits functions
return an open coded '2' to indicate this. The same value is available
as 'insn->n'. Return that instead to better indicate what the return
means.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: remove unneeded sanity check in insn_bits functions
The comedi core does the sanity check to make sure that the data length
the INSN_BITS instruction is 2. There is no need for the drivers to do
this check. Remove all the sanity checks in the drivers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 18 Jun 2012 15:35:54 +0000 (16:35 +0100)]
staging: comedi: usbduxsigma: use attach_usb() hook
Change the usbduxsigma driver to use the new attach_usb() hook in struct
comedi_driver to auto-configure probed USB devices after the firmware is
loaded.
Move the release of the driver's static 'start_stop_sem' semaphore in
usbduxsigma_attach() to occur a bit later for convenience, otherwise the
new usbduxsigma_attach_common() would need to be split in two. I don't
think the slight delay in releasing the semaphore matters too much; it's
only used in the USB probe and disconnect functions and when attaching
and detaching comedi devices.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 18 Jun 2012 14:16:44 +0000 (15:16 +0100)]
staging: comedi: usbduxfast: use attach_usb() hook
Change the usbduxfast driver to use the new attach_usb() hook in struct
comedi_driver to auto-configure probed USB devices after the firmware is
loaded.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 18 Jun 2012 13:05:34 +0000 (14:05 +0100)]
staging: comedi: change device used in dev_...() calls
A previous set of patches by Ravishankar Karkala Mallikarjunayya
replaced a load of printk() calls with dev_info(), dev_err(), etc.
Unfortunately, these used the 'struct device *hw_dev' member of 'struct
comedi_device') as the first parameter of these dev_...() calls, but
that pointer is usually NULL, so the kernel log messages come out a bit
wrong (they contain the phrase "(NULL device *)").
Use the 'struct device *class_dev' member of 'struct comedi_device'
instead for these dev_...() calls. It will be non-NULL and somewhat
meaningful to users. It's also consistent with those comedi drivers
that already use the class_dev member in their dev_...() calls.
Some of the messages included the format "comedi%d" with the minor
device number used for the "%d". This is now redundant as it will be
the same as the dev_name() part of the kernel log message produced by
the dev_...() calls.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: fix Kconfig for COMEDI_PCMCIA_DRIVERS
The depends on PCCARD is redundant. All of the comedi PCMCIA
drivers depend on PCMCIA which can only be enabled if PCCARD
is enabled. Remove the extra depends check.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Tested-by: Ian Abbott <abbotti@mev.co.uk> Reported-by: Randy Dunlap <rdunlap@xenotime.net> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
iio_scan_mask_match() returns NULL if the passed in scan mask is empty. This
will happen if no channel has been selected and buffer is enabled.
iio_sw_buffer_preenable() will assign NULL to indio_dev->active_scan_mask in
this case. As a result iio_update_demux() will cause a NULL pointer deref,
because it expects active_scan_mask to be non-NULL.
Since it does not make much sense to start data capture if there is no data to
capture this patch updates the code to fail gracefully in iio_scan_mask_match()
instead of crashing the kernel.
The ADIS163xx variants use a different register address for the auxiliary ADC
channel than the ADIS16400. This patch fixes them to use the correct address.
staging:iio:adis16400: Fix ADIS16334 temperature address
The channel spec for ADUS16334's temperature channel uses the address and scan
index for the Z-axis acceleration channel. This patch fixes it to use the
temperature channel address and scan index instead.
The PDEBUG macro is used to output a bunch of debug messages in the
driver. These messages might be useful when first creating the driver
but they shouldn't be in mainline. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: pcl812: remove PCL812_EXTDEBUG define and related code
The PCL812_EXTDEBUG define enables a bunch of function tracing debug
messages as well as a dump of the comedi_cmd info during the cmdtest.
There are better ways to do the function tracing and the cmdtest
dump shouldn't be in the driver. Just remove all of it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: pcl812: remove unneeded tests in pcl812_ai_cmdtest
The step 2 tests to make sure that the triggers are unique is not
needed for single source triggers. These were already trivially
validated in step 1.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: pcl818: remove unneeded tests in ai_cmdtest
The step 2 tests of the start_src, scan_begin_src, and scan_end_src
triggers to make sure they are unique are not needed. These triggers
all only have one source and it was trivially validated in step 1.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: pcl816: remove unneeded tests in pcl816_ai_cmdtest
The step 2 tests of the start_src, scan_begin_src, and scan_end_src
triggers to make sure they are unique are not needed. These triggers
all only have one source and it was trivially validated in step 1.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: ni_atmio16d: remove the function tracing debug
These printk's are #ifdef'ed out with an undefined symbol anyway.
Just remove them.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Bart Westgeest [Wed, 13 Jun 2012 19:37:18 +0000 (15:37 -0400)]
staging: usbip: cleanup and fix of vhci_hub_status
Changed setting the status bits to a byte-oriented approach. Number of
written status bits is now based on VHCI_NPORT, instead of casting
status buffer to a long. This fixes a stack corruption bug on 64-bit
based architectures, and potential byte order / endianness related
issues.
In addition updated function comments, and log statements.
Seth Jennings [Wed, 13 Jun 2012 21:03:42 +0000 (16:03 -0500)]
staging: zsmalloc: fix uninit'ed variable warning
This patch fixes an uninitialized variable warning in
alloc_zspage(). It also fixes the secondary issue of
prev_page leaving scope on each loop iteration. The only
reason this ever worked was because prev_page was occupying
the same space on the stack on each iteration.
staging: comedi: 8255: add some whitespace to the #define's
Add whitespace to the _8255_* defines to improve readability.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: 8255: add namespace to 'do_config' function
The name 'do_config' is pretty generic, and this function is the
only one in this driver without namespace. Add namespace to it
just to avoid any issues.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: 8255: move the subdev_8255_io function
The subdev_8255_interrupt function indirectly calls subdev_8255_io.
For aesthetic reasons, move the subdev_8255_io function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: 8255: refactor subdev_8255_insn function
Refactor the subdev_8255_insn function to follow what the user
space library is doing.
1) This function requires 'data' to contain 2 parameters. Add a
sanity check for this (insn->n != 2).
2) The 'data' parameters are actually a 'mask' of the valid bits and
the actual 'bits' to modify. Create local variables of these names
to help with maintainability.
3) The value returned in data[1] reflects the actual state of the
8255 io pins after the update of the masked bits. Fetch this data
in a local variable and then set data[1].
4) The user space library only checks for a < 0 return to indicate
an error. It appears that the 'return 2' in this function is supposed
to indicate the number of data parameters used to perform the command.
Return the insn->n value for this, the open coded '2' looks wrong.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Iam Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: 8255: use a local variable for the iobase
To improve readability, use a locale variable to hold the 8255's
private iobase value.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: 8255: use kzalloc to allocate the private data
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: 8255: check for failure of subdev_8255_init
The initialization of the 8255 subdevice can fail. Make sure to
check for it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: 8255: remove have_irg and refactor subdev_8255_init_irq
The have_irq variable in the 8255 private data is not used by the driver,
remove it. This removes the need to access the private data in the
subdev_8255_init_irq function.
Also, add a bit of whitespace to improve the readability.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Refactor the initialization of the 8255 so that the private data
allocation is done before the subdevice is setup. This makes sure
that the setup is complete.
Also, add a bit of whitespace to improve the readability.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: 8255: push out the 8255's private data variable rename
Push out the rename of the private variables to improve the readability
of the driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The 8255's private data variables cb_arg and cb_func are actually
the iobase for the 8255 device and the pointer to the io function
to access the device. Rename them as such to improve the readability
of the driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: 8255: remove the s->private access macros
The macros CALLBACK_ARG, CALLBACK_FUNC, and subdevpriv all rely
on a a local variable having a specific name. Replace the macros
with local variables wherever they occur.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: 8255: rename the private data structure
Rename the 8255's private data structure from subdev_8255_struct
to subdev_8255_private.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: 8255: use pointer to dev->subdevices
Instead of accessing the dev->subdevices directly as an array,
use a pointer. This method is more common in the comedi subsystem.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replace the printk calls with dev_info, dev_warn, etc.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
== Constant fields with 'dead' code: ==
pSoftSetting is set to XGI330_SoftSetting = 0x30
-> if (*pVBInfo->pSoftSetting & SoftDRAMType) is never true since
SoftDRAMType = 0x80
-> if (*pVBInfo->pSoftSetting & ModeSoftSetting) is never true since
ModeSoftSetting = 0x04
--> remove the code, remove pSoftSetting, remove XGI330_SoftSetting
pDVOSetting is set to XG21_DVOSetting = 0
-> if (((*pVBInfo->pDVOSetting) & 0xC0) == 0xC0) is never true
--> remove the code, remove pDVOSetting, remove XG21_DVOSetting
pXGINew_DRAMTypeDefinition is set to &XG40_DRAMTypeDefinition 0xFF
-> if (*pVBInfo->pXGINew_DRAMTypeDefinition != 0x0C) is always true
--> remove the if and remove pXGINew_DRAMTypeDefinition
remove XG40_DRAMTypeDefinition
== Replace pointer to unsigned char with unsigned char variable
and assign value of referenced pointer: ==
pSR21 -> SR21, remove XGI330_SR21
pSR22 -> SR22, remove XGI330_SR22
pXGINew_CR97 -> XGINew_CR97, remove XG20_CR97, XG27_CR97 and Z11m_CR97
Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Huewe [Wed, 13 Jun 2012 22:21:51 +0000 (00:21 +0200)]
staging/xgifb: Use SiS structs
This patch replaces some of the XGI internal structs by their
counterparts in the SiS driver.
XGI330_LVDSDataStruct -> SiS_LVDSData
XGI330_LCDDataStruct -> SiS_LCDData
XGI330_CHTVDataStruct -> SiS_LVDSData
Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Huewe [Wed, 13 Jun 2012 22:21:50 +0000 (00:21 +0200)]
staging/xgifb: Replace delay lookup tables with constant values
For TV Devices:
The values taken from XGI_TVDelayList are always overwritten with the
values from XGI_TVDelayList2 since the if condition for using the values
from XGI_TVDelayList2 is identical with the check to enter this scope and
thus always true.
The delay values in XGI_TVDelayList2 is always 0x22 so we
can simply replace it with this constant value.
For LCD Devices:
The LCD_DelayCompensation field is always set to 0x12 so we can simply
replace this field with a constant value.
This saves about 500 bytes in compiled size.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Huewe [Wed, 13 Jun 2012 22:21:46 +0000 (00:21 +0200)]
staging/xgifb: Remove unnecessary fields of XGINew_DDRDRAM_TYPE{340, 20}
Since the first three entries in XGINew_DDRDRAM_TYPE{340,20} are never
used, we can simply remove them;
and instead of passing XGINew_DDRDRAM_TYPE with an index we can simply
pass the value directly to XGINew_SetDRAMSize20Reg.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch consolidates the almost identical functions
XGINew_SetDRAMSizeReg and XGINew_SetDRAMSize20Reg as they are
implemented identically except one division factor.
The changed factor is now reflected in the input data.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Huewe [Wed, 13 Jun 2012 22:21:40 +0000 (00:21 +0200)]
staging/xgifb: Add mutext for fb_mmap locking
This adds a mutex for fb_mmap around smem_start and smem_len
so the mutex inside the fb_mmap() is actually used. Changing of
these fields before calling the framebuffer_register() are not mutexed.
We check whether framebuffer_register has been called by reading
fbinfo->count.
See 537a1bf0 - "fbdev: add mutex for fb_mmap locking" by Krzysztof Helt
for details.
Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Huewe [Wed, 13 Jun 2012 22:21:39 +0000 (00:21 +0200)]
staging/xgifb: Remove assignments without effect
This patch removes assignments to the fb_fix_screeninfo struct which are
overwritten by the memset in XGIfb_get_fix() a few lines later.
Since the name/id might be useful this was moved to XGIfb_get_fix().
Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anton Vorontsov [Sat, 26 May 2012 13:20:29 +0000 (06:20 -0700)]
pstore/platform: Disable automatic updates by default
Having automatic updates seems pointless for production system, and
even dangerous and thus counter-productive:
1. If we can mount pstore, or read files, we can as well read
/proc/kmsg. So, there's little point in duplicating the
functionality and present the same information but via another
userland ABI;
2. Expecting the kernel to behave sanely after oops/panic is naive.
It might work, but you'd rather not try it. Screwed up kernel
can do rather bad things, like recursive faults[1]; and pstore
rather provoking bad things to happen. It uses:
1. Timers (assumes sane interrupts state);
2. Workqueues and mutexes (assumes scheduler in a sane state);
3. kzalloc (a working slab allocator);
That's too much for a dead kernel, so the debugging facility
itself might just make debugging harder, which is not what
we want.
Maybe for non-oops message types it would make sense to re-enable
automatic updates, but so far I don't see any use case for this.
Even for tracing, it has its own run-time/normal ABI, so we're
only interested in pstore upon next boot, to retrieve what has
gone wrong with HW or SW.
Anton Vorontsov [Sat, 26 May 2012 13:20:27 +0000 (06:20 -0700)]
pstore/ram_core: Remove now unused code
The code tried to maintain the global list of persistent ram zones,
which isn't a great idea overall, plus since Android's ram_console
is no longer there, we can remove some unused functions.
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anton Vorontsov [Sat, 26 May 2012 13:20:24 +0000 (06:20 -0700)]
pstore/ram_core: Silence some printks
Since we use multiple regions, the messages are somewhat annoying.
We do print total mapped memory already, so no need to print the
information for each region in the library routines.
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anton Vorontsov [Sat, 26 May 2012 13:20:22 +0000 (06:20 -0700)]
pstore/ram: Factor ramoops_get_next_prz() out of ramoops_pstore_read()
This will help make code clearer when we'll add support for other
message types.
The patch also changes return value from -EINVAL to 0 in case of
end-of-records. The exact value doesn't matter for pstore (it should
be just <= 0), but 0 feels more correct.
Anton Vorontsov [Sat, 26 May 2012 13:20:19 +0000 (06:20 -0700)]
pstore: Add console log messages support
Pstore doesn't support logging kernel messages in run-time, it only
dumps dmesg when kernel oopses/panics. This makes pstore useless for
debugging hangs caused by HW issues or improper use of HW (e.g.
weird device inserted -> driver tried to write a reserved bits ->
SoC hanged. In that case we don't get any messages in the pstore.
Therefore, let's add a runtime logging support: PSTORE_TYPE_CONSOLE.
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Colin Cross <ccross@android.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Anton Vorontsov [Sat, 26 May 2012 13:07:49 +0000 (06:07 -0700)]
pstore/ram: Should update old dmesg buffer before reading
Without the update, we'll only see the new dmesg buffer after the
reboot, but previously we could see it right away. Making an oops
visible in pstore filesystem before reboot is a somewhat dubious
feature, but removing it wasn't an intentional change, so let's
restore it.
For this we have to make persistent_ram_save_old() safe for calling
multiple times, and also extern it.
staging: comedi: Kconfig: cleanup depends on logic
All of the config options for comedi depend on COMEDI being
selected. Wrap everything in an 'if COMEDI/endif' block and
remove all the individual 'depends on COMEDI' in the Kconfig.
Also, remove the redundant && ISA/PCI/PCMCIA/USB for the if
blocks with those driver types.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbott@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: remove check for PCI_SUPPORT_VER1
This symbol is not defined in the kernel. It appears to be left
over from the 2.4 kernel.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbott@mev.co.uk> Cc: Frank Mori Hess <fmhess@users.sourceforge.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Peter Meerwald [Fri, 8 Jun 2012 16:06:45 +0000 (18:06 +0200)]
iio: add mcp4725 I2C DAC driver
v5:
* fix warnings (Jonathan Cameron)
v4:
* remove unused indio_dev pointer in mcp4725_data (Jonathan Cameron)
* use u16 instead of unsigned short in mcp4725_data (Jonathan Cameron)
* #include mcp4725.h from linux/iio/dac/
v3:
* move from staging to drivers/iio
* switch to chan_spec
* dev_get_drvdata() -> dev_to_iio_dev()
* annotate probe() and remove() with __devinit and __devexit
v2 (based on comments from Jonathan Cameron and Lars-Peter Clausen):
* did NOT switch to chan_spec yet
* rebase to staging-next tree, update iio header locations
* dropped dac.h #include, not needed
* strict_strtol() -> kstrtol()
* call iio_device_unregister() in remove()
* everything in one patch
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net> Acked-by: Jonathan Cameron <jic23@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Fri, 8 Jun 2012 06:54:32 +0000 (09:54 +0300)]
iio: frequency: adf4350: using an uninitialized variable
GCC complains that we use an uninitialized variable if the user passes
an invalid parameter to adf4350_read(). I decided that we should return
-EINVAL instead in that case.
However, when I looked up at adf4350_write() it returned -ENODEV for
that condition. In the end, I decided the -EINVAL was the right thing
and I change adf4350_write() to match.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Sparse complains about this:
drivers/iio/frequency/adf4350.c:58:29: warning: Initializer entry defined twice
drivers/iio/frequency/adf4350.c:59:10: also defined here
It looks like '|' was intended here instead of ','.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / karo-tx-linux.git / log