John Reiser [Wed, 27 Oct 2010 10:59:07 +0000 (18:59 +0800)]
ftrace/MIPS: Add MIPS64 support for C version of recordmcount
MIPS64 has 'weird' Elf64_Rel.r_info[1,2], which must be used instead of
the generic Elf64_Rel.r_info, otherwise, the C version of recordmcount
will not work for "segmentation fault".
Usage of "union mips_r_info" and the functions MIPS64_r_sym() and
MIPS64_r_info() written by Maciej W. Rozycki <macro@linux-mips.org>
David Daney [Thu, 14 Oct 2010 18:32:33 +0000 (11:32 -0700)]
MIPS: Make TASK_SIZE reflect proper size for both 32 and 64 bit processes.
The TASK_SIZE macro should reflect the size of a user process virtual
address space. Previously for 64-bit kernels, this was not the case.
The immediate cause of pain was in
hugetlbfs/inode.c:hugetlb_get_unmapped_area() where 32-bit processes
trying to mmap a huge page would be served a page with an address
outside of the 32-bit address range. But there are other uses of
TASK_SIZE in the kernel as well that would like an accurate value.
The new definition is nice because it now makes TASK_SIZE and
TASK_SIZE_OF() yield the same value for any given process.
For 32-bit kernels there should be no change, although I did factor
out some code in asm/processor.h that became identical for the 32-bit and
64-bit cases.
__UA_LIMIT is now set to ~((1 << SEGBITS) - 1) for 64-bit kernels.
This should eliminate the possibility of getting a
AddressErrorException in the kernel for addresses that pass the
access_ok() test.
With the patch applied, I can still run o32, n32 and n64 processes,
and have an o32 shell fork/exec both n32 and n64 processes.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1701/
Kevin Cernekee [Sat, 16 Oct 2010 21:22:38 +0000 (14:22 -0700)]
MIPS: Allow UserLocal on MIPS_R1 processors
Some MIPS32R1 processors implement UserLocal (RDHWR $29) to accelerate
programs that make extensive use of thread-local storage. Therefore,
setting up the HWRENA register should not depend on cpu_has_mips_r2.
Signed-off-by: Kevin Cernekee <cernekee@gmail.com> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org
Kevin Cernekee [Thu, 21 Oct 2010 03:05:42 +0000 (20:05 -0700)]
MIPS: Honor L2 bypass bit
On many of the newer MIPS32 cores, CP0 CONFIG2 bit 12 (L2B) indicates
that the L2 cache is disabled and therefore Linux should not attempt
to use it.
[Ralf: Moved the code added by Kevin's original patch into a separate
function that can easily be replaced for platforms that need more a
different probe.]
Kevin Cernekee [Sat, 16 Oct 2010 21:22:30 +0000 (14:22 -0700)]
MIPS: Decouple BMIPS CPU support from bcm47xx/bcm63xx SoC code
BMIPS processor cores are used in 50+ different chipsets spread across
5+ product lines. In many cases the chipsets do not share the same
peripheral register layouts, the same register blocks, the same
interrupt controllers, the same memory maps, or much of anything else.
But, across radically different SoCs that share nothing more than the
same BMIPS CPU, a few things are still mostly constant:
SMP operations
Access to performance counters
DMA cache coherency quirks
Cache and memory bus configuration
So, it makes sense to treat each BMIPS processor type as a generic
"building block," rather than tying it to a specific SoC. This makes it
easier to support a large number of BMIPS-based chipsets without
unnecessary duplication of code, and provides the infrastructure needed
to support BMIPS-proprietary features.
Deng-Cheng Zhu [Tue, 12 Oct 2010 11:37:24 +0000 (19:37 +0800)]
MIPS: Add support for hardware performance events (mipsxx)
This patch adds the mipsxx Perf-events support based on the skeleton.
Generic hardware events and cache events are now fully implemented for
the 24K/34K/74K/1004K cores. To support other cores in mipsxx (such as
R10000/SB1), the generic hardware event tables and cache event tables
need to be filled out. To support other CPUs which have different PMU
than mipsxx, such as RM9000 and LOONGSON2, the additional files
perf_event_$cpu.c need to be created.
Raw event is an important part of Perf-events. It helps the user collect
performance data for events that are not listed as the generic hardware
events and cache events but ARE supported by the CPU's PMU.
This patch also adds this feature for mipsxx 24K/34K/74K/1004K. For how to
use it, please refer to processor core software user's manual and the
comments for mipsxx_pmu_map_raw_event() for more details.
Please note that this is a "precise" implementation, which means the
kernel will check whether the requested raw events are supported by this
CPU and which hardware counters can be assigned for them.
To test the functionality of Perf-event, you may want to compile the tool
"perf" for your MIPS platform. You can refer to the following URL:
http://www.linux-mips.org/archives/linux-mips/2010-10/msg00126.html
You also need to customize the CFLAGS and LDFLAGS in tools/perf/Makefile
for your libs, includes, etc.
In case you encounter the boot failure in SMVP kernel on multi-threading
CPUs, you may take a look at:
http://www.linux-mips.org/git?p=linux-mti.git;a=commitdiff;h=5460815027d802697b879644c74f0e8365254020
Deng-Cheng Zhu [Tue, 12 Oct 2010 11:37:23 +0000 (19:37 +0800)]
MIPS: Perf-events: Add callchain support
Adds callchain support for MIPS Perf-events. For more info on this feature,
please refer to tools/perf/Documentation/perf-report.txt and
tools/perf/design.txt.
Currently userspace callchain data is not recorded, because we do not have
a safe way to do this.
Deng-Cheng Zhu [Tue, 12 Oct 2010 11:37:22 +0000 (19:37 +0800)]
MIPS: add support for hardware performance events (skeleton)
This patch provides the skeleton of the HW perf event support. To enable
this feature, we can not choose the SMTC kernel; Oprofile should be
disabled; kernel performance events be selected. Then we can enable it in
Kernel type menu.
Oprofile for MIPS platforms initializes irq at arch init time. Currently
we do not change this logic to allow PMU reservation.
If a platform has EIC, we can use the irq base and perf counter irq offset
defines for the interrupt controller in specific init_hw_perf_events().
Based on this skeleton patch, the 3 different kinds of MIPS PMU, namely,
mipsxx/loongson2/rm9000, can be supported by adding corresponding lower
level C files at the bottom. The suggested names of these files are
perf_event_mipsxx.c/perf_event_loongson2.c/perf_event_rm9000.c. So, for
example, we can do this by adding "#include perf_event_mipsxx.c" at the
bottom of perf_event.c.
In addition, PMUs with 64bit counters are also considered in this patch.
Deng-Cheng Zhu [Tue, 12 Oct 2010 11:37:21 +0000 (19:37 +0800)]
MIPS: add support for software performance events
Software events are required as part of the measurable stuff by the
Linux performance counter subsystem. Here is the list of events added by
this patch:
PERF_COUNT_SW_PAGE_FAULTS
PERF_COUNT_SW_PAGE_FAULTS_MIN
PERF_COUNT_SW_PAGE_FAULTS_MAJ
PERF_COUNT_SW_ALIGNMENT_FAULTS
PERF_COUNT_SW_EMULATION_FAULTS
Signed-off-by: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
To: linux-mips@linux-mips.org Cc: a.p.zijlstra@chello.nl Cc: paulus@samba.org Cc: mingo@elte.hu Cc: acme@redhat.com Cc: jamie.iles@picochip.com Acked-by: David Daney <ddaney@caviumnetworks.com> Reviewed-by: Matt Fleming <matt@console-pimps.org>
Patchwork: https://patchwork.linux-mips.org/patch/1686/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Deng-Cheng Zhu [Tue, 12 Oct 2010 11:37:20 +0000 (19:37 +0800)]
MIPS: define local_xchg from xchg_local to atomic_long_xchg
Perf-events is now using local_t helper functions internally. There is a
use of local_xchg(). On MIPS, this is defined to xchg_local() which is
missing in asm/system.h. This patch re-defines local_xchg() in asm/local.h
to atomic_long_xchg(). Then Perf-events can pass the build.
Florian Fainelli [Sun, 29 Aug 2010 15:08:44 +0000 (17:08 +0200)]
MIPS: AR7: Add support for Titan (TNETV10xx) SoC variant
Add support for Titan TNETV1050,1055,1056,1060 variants. This SoC is almost
completely identical to AR7 except on a few points:
- a second bank of gpios is available
- vlynq0 on titan is vlynq1 on ar7
- different PHY addresses for cpmac0
This SoC can be found on commercial products like the Linksys WRTP54G
Original patch by Xin with improvments by Florian.
David Daney [Fri, 8 Oct 2010 21:47:52 +0000 (14:47 -0700)]
USB: Add EHCI and OHCH glue for OCTEON II SOCs.
The OCTEON II SOC has USB EHCI and OHCI controllers connected directly
to the internal I/O bus. This patch adds the necessary 'glue' logic
to allow ehci-hcd and ohci-hcd drivers to work on OCTEON II.
The OCTEON normally runs big-endian, and the ehci/ohci internal
registers have host endianness, so we need to select
USB_EHCI_BIG_ENDIAN_MMIO.
The ehci and ohci blocks share a common clocking and PHY
infrastructure. Initialization of the host controller and PHY clocks
is common between the two and is factored out into the
octeon2-common.c file.
Setting of USB_ARCH_HAS_OHCI and USB_ARCH_HAS_EHCI is done in
arch/mips/Kconfig in a following patch.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-usb@vger.kernel.org
To: dbrownell@users.sourceforge.net
Patchwork: http://patchwork.linux-mips.org/patch/1675/ Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David Daney [Thu, 7 Oct 2010 23:03:53 +0000 (16:03 -0700)]
MIPS: Octeon: Apply CN63XXP1 errata workarounds.
The CN63XXP1 needs a couple of workarounds to ensure memory is not written
in unexpected ways.
All PREF with hints in the range 0-4,6-24 are replaced with PREF 28. We
pass a flag to the assembler to cover compiler generated code, and patch
uasm for the dynamically generated code.
The write buffer threshold is reduced to 4.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/1672/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David Daney [Thu, 7 Oct 2010 23:03:52 +0000 (16:03 -0700)]
WATCHDOG: octeon-wdt: Use I/O clock rate for timing calculations.
The creation of the I/O clock domain requires some adjustments. Since
the watchdog counters are clocked by the I/O clock, use its rate for
timing calculations.
Signed-off-by: David Daney <ddaney@caviumnetworks.com> Cc: Wim Van Sebroeck <wim@iguana.be> Cc: linux-watchdog@vger.kernel.org
Patchwork: http://patchwork.linux-mips.org/patch/1659/ Acked-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David Daney [Thu, 7 Oct 2010 23:03:51 +0000 (16:03 -0700)]
ATA: pata_octeon_cf: Use I/O clock rate for timing calculations.
The creation of the I/O clock domain requires some adjustments. Since the
CF bus timing logic is clocked by the I/O clock, use its rate for delay
calculations.
Signed-off-by: David Daney <ddaney@caviumnetworks.com> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: linux-ide@vger.kernel.org
Patchwork: http://patchwork.linux-mips.org/patch/1660/ Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David Daney [Thu, 7 Oct 2010 23:03:49 +0000 (16:03 -0700)]
MIPS: Octeon: Add octeon_get_io_clock_rate() for cn63xx
Starting with cn63xx Octeon I/O blocks are clocked at a different rate
than the CPU. Add a new function octeon_get_io_clock_rate() that
yields the I/O clock rate.
Also rearrange octeon_get_clock_rate() to get the value from the saved
sysinfo structure.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/1671/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David Daney [Fri, 1 Oct 2010 20:27:34 +0000 (13:27 -0700)]
MIPS: Octeon: Rewrite DMA mapping functions.
All Octeon chips can support more than 4GB of RAM. Also due to how Octeon
PCI is setup, even some configurations with less than 4GB of RAM will have
portions that are not accessible from 32-bit devices.
Enable the swiotlb code to handle the cases where a device cannot directly
do DMA. This is a complete rewrite of the Octeon DMA mapping code.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/1639/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David Daney [Fri, 1 Oct 2010 20:27:32 +0000 (13:27 -0700)]
MIPS: Convert DMA to use dma-mapping-common.h
Use asm-generic/dma-mapping-common.h to handle all DMA mapping operations
and establish a default get_dma_ops() that forwards all operations to the
existing code.
Augment dev_archdata to carry a pointer to the struct dma_map_ops, allowing
DMA operations to be overridden on a per device basis. Currently this is
never filled in, so the default dma_map_ops are used. A follow-on patch
sets this for Octeon PCI devices.
Also initialize the dma_debug system as it is now used if it is configured.
Includes fixes by Kevin Cernekee <cernekee@gmail.com>.
David Daney [Fri, 1 Oct 2010 20:27:31 +0000 (13:27 -0700)]
MIPS: ip32, ip27, jazz: Make static functions in dma-coherence.h inline.
Any function defined in a header file should be inline. This helps us
avoid 'unused' compiler warnings when we include the files in more
places in subsequent patches.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/1636/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
David Daney [Fri, 1 Oct 2010 20:27:29 +0000 (13:27 -0700)]
MIPS: Octeon: Adjust top of DMA32 zone.
On OCTEON, we reserve the last 256MB of 32-bit PCI address space, mapping
the RAM in this region at a high DMA address. This makes memory in this
region unavailable for 32-bit DMA.
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Patchwork: http://patchwork.linux-mips.org/patch/1634/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Ralf Baechle [Fri, 29 Oct 2010 18:08:24 +0000 (19:08 +0100)]
MIPS: Get rid of branches to .subsections.
It was a nice optimization - on paper at least. In practice it results in
branches that may exceed the maximum legal range for a branch. We can
fight that problem with -ffunction-sections but -ffunction-sections again
is incompatible with -pg used by the function tracer.
By rewriting the loop around all simple LL/SC blocks to C we reduce the
amount of inline assembler and at the same time allow GCC to often fill
the branch delay slots with something sensible or whatever else clever
optimization it may have up in its sleeve.
With this optimization gone we also no longer need -ffunction-sections,
so drop it.
Linus Torvalds [Fri, 29 Oct 2010 00:11:17 +0000 (17:11 -0700)]
Merge branch 'stable/xen-pcifront-0.8.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
and branch 'for-linus' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm
* 'for-linus' of git://xenbits.xen.org/people/sstabellini/linux-pvhvm:
xen: register xen pci notifier
xen: initialize cpu masks for pv guests in xen_smp_init
xen: add a missing #include to arch/x86/pci/xen.c
xen: mask the MTRR feature from the cpuid
xen: make hvc_xen console work for dom0.
xen: add the direct mapping area for ISA bus access
xen: Initialize xenbus for dom0.
xen: use vcpu_ops to setup cpu masks
xen: map a dummy page for local apic and ioapic in xen_set_fixmap
xen: remap MSIs into pirqs when running as initial domain
xen: remap GSIs as pirqs when running as initial domain
xen: introduce XEN_DOM0 as a silent option
xen: map MSIs into pirqs
xen: support GSI -> pirq remapping in PV on HVM guests
xen: add xen hvm acpi_register_gsi variant
acpi: use indirect call to register gsi in different modes
xen: implement xen_hvm_register_pirq
xen: get the maximum number of pirqs from xen
xen: support pirq != irq
* 'stable/xen-pcifront-0.8.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: (27 commits)
X86/PCI: Remove the dependency on isapnp_disable.
xen: Update Makefile with CONFIG_BLOCK dependency for biomerge.c
MAINTAINERS: Add myself to the Xen Hypervisor Interface and remove Chris Wright.
x86: xen: Sanitse irq handling (part two)
swiotlb-xen: On x86-32 builts, select SWIOTLB instead of depending on it.
MAINTAINERS: Add myself for Xen PCI and Xen SWIOTLB maintainer.
xen/pci: Request ACS when Xen-SWIOTLB is activated.
xen-pcifront: Xen PCI frontend driver.
xenbus: prevent warnings on unhandled enumeration values
xenbus: Xen paravirtualised PCI hotplug support.
xen/x86/PCI: Add support for the Xen PCI subsystem
x86: Introduce x86_msi_ops
msi: Introduce default_[teardown|setup]_msi_irqs with fallback.
x86/PCI: Export pci_walk_bus function.
x86/PCI: make sure _PAGE_IOMAP it set on pci mappings
x86/PCI: Clean up pci_cache_line_size
xen: fix shared irq device passthrough
xen: Provide a variant of xen_poll_irq with timeout.
xen: Find an unbound irq number in reverse order (high to low).
xen: statically initialize cpu_evtchn_mask_p
...
Linus Torvalds [Thu, 28 Oct 2010 23:19:38 +0000 (16:19 -0700)]
Merge branch 'packaging' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6
* 'packaging' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
scripts/package: don't break if %{_smp_mflags} isn't set
kbuild, deb-pkg: Check if KBUILD_IMAGE exists before copying it
Linus Torvalds [Thu, 28 Oct 2010 23:18:59 +0000 (16:18 -0700)]
Merge branch 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6
* 'misc' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: (39 commits)
Revert "namespace: add source file location exceptions"
Coccinelle: Add contextual message
Coccinelle: Fix documentation
Coccinelle: Find doubled arguments to boolean or bit operators.
Coccinelle: Find nested lock+irqsave functions that use the same flags variables.
namespace: add source file location exceptions
scripts/extract-ikconfig: add support for bzip2, lzma and lzo
kbuild: check return value of asprintf()
scripts/namespace.pl: improve to get more correct results
scripts/namespace.pl: some bug fixes
scripts/namespace.pl: update file exclusion list
scripts/namespace.pl: fix wrong source path
Coccinelle: Use the -no_show_diff option for org and report mode
Coccinelle: Add a new mode named 'chain'
Coccinelle: Use new comment format to explain kfree.cocci
Coccinelle: Improve user information with a new kind of comment
Coccinelle: Update documentation
MAINTAINERS: Coccinelle: Update email address
Documentation/kbuild: modules.txt cleanup
Documentation/kbuild: major edit of modules.txt sections 5-8
...
Linus Torvalds [Thu, 28 Oct 2010 23:16:39 +0000 (16:16 -0700)]
Merge branch 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6
* 'kconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6: (38 commits)
kbuild: convert `arch/tile' to the kconfig mainmenu upgrade
README: cite nconfig
Revert "kconfig: Temporarily disable dependency warnings"
kconfig: Use PATH_MAX instead of 128 for path buffer sizes.
kconfig: Fix realloc usage()
kconfig: Propagate const
kconfig: Don't go out from read config loop when you read new symbol
kconfig: fix menuconfig on debian lenny
kbuild: migrate all arch to the kconfig mainmenu upgrade
kconfig: expand file names
kconfig: use the file's name of sourced file
kconfig: constify file name
kconfig: don't emit warning upon rootmenu's prompt redefinition
kconfig: replace KERNELVERSION usage by the mainmenu's prompt
kconfig: delay gconf window initialization
kconfig: expand by default the rootmenu's prompt
kconfig: add a symbol string expansion helper
kconfig: regen parser
kconfig: implement the `mainmenu' directive
kconfig: allow PACKAGE to be defined on the compiler's command-line
...
Linus Torvalds [Thu, 28 Oct 2010 22:54:04 +0000 (15:54 -0700)]
Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (73 commits)
power: Revert "power_supply: Mark twl4030_charger as broken"
mfd: Fix a memory leak when unload mc13xxx-core module
mfd: Fix resource reclaim for max8998
mfd: Remove unneeded ret value checking for max8998 register updates
mfd: Add free max8998->ono irq in max8998_irq_exit()
mfd: Fix resource reclaim in pcf50633_remove()
omap4: pandaboard: fix up mmc card detect logic
mfd: Fix ezx_pcap_probe error path
mfd: Fix off-by-one value range checking for tps6507x
mfd: Remove __devinitdata from tc6393xb_mmc_resources
mfd: Add WM831x SPI support
mfd: Factor out WM831x I2C I/O from the core driver
mfd: Remove DEBUG defines from mc13xxx-core
mfd: Fix jz4740_adc_set_enabled
mfd: Add TPS658621C device ID
mfd: Fix twl-irq function declaration warnings
regulator: max8998 BUCK1/2 voltage change with use of GPIOs
mfd: Voltages and GPIOs platform_data definitions for max8998
regulator: max8998 BUCK1/2 internal voltages and indexes defined
mfd: Support for ICs compliant with max8998
...
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
watchdog: iTCO_wdt.c: remove extra pci_dev_put()'s from init code
watchdog: add support for Broadcom BCM63xx built-in watchdog
watchdog: f71808e_wdt: add support for the F71889FG
watchdog: MachZ: fix debug macro
watchdog: it8712f_wdt: Add module parameter for alternative reset sources
watchdog: it8712f_wdt: Add comments for config/control register names
watchdog: it87_wdt: Add support for watchdogs with 8b timers
watchdog: it87_wdt: Add support for IT8720F watchdog
watchdog: Use static const char * const where possible
watchdog: iTCO_wdt: Cleanup warning messages
watchdog: iTCO_wdt: TCO Watchdog patch for Intel Patsburg DeviceIDs
Prarit Bhargava [Wed, 27 Oct 2010 13:50:22 +0000 (09:50 -0400)]
watchdog: iTCO_wdt.c: remove extra pci_dev_put()'s from init code
The iTCO_wdt driver erroneously releases the pci_dev, and causes PCI hotremove
to fail because of an incorrect usage count.
The probe for this driver does a for_each_pci_dev() which gets a reference for
a pci_dev when iTCO_wdt_init() is successful. The for_each_pci_dev() loop
puts a reference for a pci_dev when iTCO_wdt_init() fails, so the
iTCO_wdt_init() does not need to do any pci_dev_put()'s.
The only pci_dev_put() that is required is in the iTCO_wdt_cleanup() function.
Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
Menon, Nishanth [Tue, 19 Oct 2010 14:50:25 +0000 (09:50 -0500)]
omap4: pandaboard: fix up mmc card detect logic
For MMC1 Controller, card detect interrupt source is
twl6030 which is non-gpio. The card detect call back function provides
card present/absent status by reading MMC Control register present
on twl6030. This functionality was introduced in mfd tree on
track to kernel.org
Sync pandaboard to the same and make mmc work.
Cc: Tony Lindgren <tony@atomide.com> Cc: Madhusudhan Chikkature <madhu.cr@ti.com> Cc: Adrian Hunter <adrian.hunter@nokia.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Acked-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Signed-off-by: Nishanth Menon <nm@ti.com> Tested-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Madhusudhan Chikkature <madhu.cr@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Mark Brown [Tue, 19 Oct 2010 21:57:56 +0000 (23:57 +0200)]
mfd: Factor out WM831x I2C I/O from the core driver
In preparation for the addition of SPI support for the WM831x move the I2C
specific code into a separate file with a separate Kconfig option so the
I2C support can be excluded from the build.
Also update the 1133-EV1 PMIC module support for SMDK6410 to use the new
symbol.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Fixes following sparse warnings for twl4030 and twl6030 irq files.
drivers/mfd/twl4030-irq.c:783:5: warning: symbol 'twl4030_init_irq' was not
declared. Should it be static?
drivers/mfd/twl4030-irq.c:863:5: warning: symbol 'twl4030_exit_irq' was not
declared. Should it be static?
drivers/mfd/twl4030-irq.c:873:5: warning: symbol 'twl4030_init_chip_irq' was
not declared. Should it be static?
drivers/mfd/twl6030-irq.c:226:5: warning: symbol 'twl6030_init_irq' was not
declared. Should it be static?
drivers/mfd/twl6030-irq.c:290:5: warning: symbol 'twl6030_exit_irq' was not
declared. Should it be static?
Signed-off-by: G, Manjunath Kondaiah <manjugk@ti.com> Cc: linux-arm-kernel@lists.infradead.org Cc: Tony Lindgren <tony@atomide.com> Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
regulator: max8998 BUCK1/2 voltage change with use of GPIOs
max8998_pmic_probe:
- modified to check if valid pins are defined at platform
data
- maximal voltage values (predefined at platform data) are uploaded to
max8998 device
max8998_set_voltage_buck:
- BUCK1/2 voltages change between values already defined
- Checks if valid GPIO pins are passed from platform data
- If requested voltage cannot be satisfied from already defined values,
then one of free slots is used
- Predefined maximum voltages (as defined at platform data) are always
available
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
mfd: Voltages and GPIOs platform_data definitions for max8998
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
regulator: max8998 BUCK1/2 internal voltages and indexes defined
BUCK1/2 internal voltages and indexes defined in the struct max8998_data
max_get_voltage_register now uses index values to chose proper register
More generic BUCK1/2 registers names provided
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
regulator: Separate set_voltage for max8998 ldo and buck
Signed-off-by: Lukasz Majewski <l.majewski@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
mfd: Fix TWL4030 COR bit polarity for BCI SIH block
The chip TRM documentation contradicts itself about this bit, page 174
of swcu050e says bit should be 0 for clear-on-read behavior, while
page 487 says it should be 1. Testing shows it should be 1, so set
the .set_cor flag accordingly. This is needed for upcoming BCI
charging driver to function.
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Brian Harring [Mon, 18 Oct 2010 23:21:06 +0000 (01:21 +0200)]
mfd: Add devices platform data when the cell data size is not 0
When the cell data_size is 0, the resulting platform_data pointer will be
set to ZERO_SIZE_PTR. That could be misleading for device drivers running
a NULL check on thei platform_data pointer before dereferencing it.
Signed-off-by: Brian Harring <ferringb@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Uwe Kleine-König [Thu, 28 Oct 2010 10:30:53 +0000 (12:30 +0200)]
rtc: Add support for the rtc found in the MC13892 PMIC
The mfd driver for MC13783 recently got support for MC13892 and was
renamed accordingly from mc13783-core to mc13xxx-core. Do the same for
rtc-mc13783.
The only relevant change is to use platform id's to tell the platform bus
that this driver is responsible for mc13892-rtc devices, too.
mfd: Adding twl6030 mmc card detect support for MMC1
Adding card detect callback function and card detect configuration
function for MMC1 Controller on OMAP4.
Card detect configuration function does initial configuration of the
MMC Control & PullUp-PullDown registers of Phoenix.
For MMC1 Controller, card detect interrupt source is
twl6030 which is non-gpio. The card detect call back function provides
card present/absent status by reading MMC Control register present
on twl6030.
Since OMAP4 doesn't use any GPIO line as used in OMAP3 for card detect,
the suspend/resume initialization which was done in omap_hsmmc_gpio_init
previously is moved to the probe thus making it generic for both OMAP3 &
OMAP4.
Cc: Tony Lindgren <tony@atomide.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Madhusudhan Chikkature <madhu.cr@ti.com> Cc: Adrian Hunter <adrian.hunter@nokia.com> Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
so regulators and num_regulators can go away. Then apart from the flag
indicating that the adc does a conversion, flags is only a copy of the
flags member of platform_data. This flag isn't needed to be returned by
mc13783_get_flags, so mc13783_get_flags now gets the flags from
platform_data, too and the driver private member is renamed for clearity.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Daniel Drake [Thu, 30 Sep 2010 20:55:48 +0000 (21:55 +0100)]
gpio: Add VIA VX855 GPIO driver
This is needed for supporting the upcoming VX855 camera and OLPC DCON
drivers, as well as the advanced viafb features on non-OLPC hardware
based on this chip.
Based on earlier work by Harald Welte.
Signed-off-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Mark Brown [Tue, 28 Sep 2010 16:13:39 +0000 (09:13 -0700)]
mfd: Add WM8325 support
The WM8325 is a PMIC for low power, high performance applications. From
a software point of view the device is identical to the WM8320, all the
differences are at the hardware level.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
Mark Brown [Wed, 22 Sep 2010 13:58:30 +0000 (14:58 +0100)]
mfd: Declare abx500_remove_ops()
Otherwise sparse warns about a public symbol with no declaration and
the compiler can't spot if the callers and users have different signatures
for the function.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
This patch adds the possibility to read and write registers
via the debug_fs. It also adds ranges of registers sorted by bank
which makes it possible to read all defined registers in a bank.
Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
This patch makes the ab8500 mixed signal chip expose the same
interface for register access as the ab3100, ab3550 and ab5500 chip.
The ab8500_read() and ab8500_write() is removed and replaced with
abx500_get_register_interruptible() and
abx500_set_register_interruptible().
Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com> Acked-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
projects / linux-beck.git / log