The clk notifier symbols are hidden by COMMON_CLK. However on some
platforms HAVE_CLK might be set while COMMON_CLK not which leads to
compile test build errors like:
$ make.cross ARCH=sh
drivers/devfreq/tegra-devfreq.c: In function 'tegra_actmon_rate_notify_cb':
>> drivers/devfreq/tegra-devfreq.c:391:16: error: 'POST_RATE_CHANGE' undeclared (first use in this function)
if (action != POST_RATE_CHANGE)
^
drivers/devfreq/tegra-devfreq.c: In function 'tegra_devfreq_probe':
>> drivers/devfreq/tegra-devfreq.c:654:8: error: implicit declaration of function 'clk_notifier_register' [-Werror=implicit-function-declaration]
err = clk_notifier_register(tegra->emc_clock, &tegra->rate_change_nb);
^
Export the macros and data type declarations outside of COMMON_CLK ifdef
and provide stubs to fix the compile testing.
Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Stephen Boyd [Tue, 28 Jun 2016 23:36:34 +0000 (16:36 -0700)]
Merge tag 'clk-renesas-for-v4.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers into clk-next
Pull support for Renesas R-car M3-W from Geert Uytterhoeven:
Add initial support for the Clock Pulse Generator and Module Standby and
Software Reset modules on the Renesas R-Car M3-W SoC:
- Basic core clocks,
- SCIF2 (console) module clock,
- INTC-AP (GIC) module clock.
* tag 'clk-renesas-for-v4.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-drivers:
clk: renesas: cpg-mssr: Add support for R-Car M3-W
clk: renesas: cpg-mssr: Extract common R-Car Gen3 support code
clk: renesas: Add r8a7796 CPG Core Clock Definitions
clk: renesas: cpg-mssr: Document r8a7796 support
Stephen Boyd [Tue, 21 Jun 2016 22:53:14 +0000 (15:53 -0700)]
clk: qcom: Remove gcc_aggre1_pnoc_ahb_clk from msm8996
This clk is critical to operation of the SoC and should never be
turned off. Furthermore, there are no consumers of this clk so
let's just delete it so things like eMMC work.
Reported-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Fixes: b1e010c0730a ("clk: qcom: Add MSM8996 Global Clock Control (GCC) driver") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The gxbb clock controller is the primary clock generation unit for the
AmLogic GXBB SoC. It is clocked by a fixed 24MHz xtal, contains several
PLLs and the usual post-dividers, muxes, dividers and leaf gates that
are fed into various IP blocks in the SoC.
Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Fractional MPLLs are a superset of the existing AmLogic MPLLs. They add
in a couple of new bitfields for further dividing the clock rate to
achieve rates with fractional hertz.
Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
There are a series of peripheral and system gate clocks that fan out
from the clk81 signal. Add a helper macro to statically initialize these
gate clocks.
Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Break the AmLogic clock code up so that only the necessary parts are
compiled and linked. The core code is selected by both arm and arm64
builds with COMMON_CLK_AMLOGIC. The individual drivers have their own
config options as well.
Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
This patch creates a proper platform_driver for the meson8b clock
controller. Use of CLK_OF_DECLARE is removed, and can be added back in
later if very early registration of some clocks is required.
Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Remove the composite clock registration function and helpers. Replace
unnecessary configuration struct with static initialization of the
desired clock type.
To preserve git bisect this patch also flips the switch and starts using
of_clk_add_hw_provider instead of the deprecated meson_clk_register_clks
method. As a byproduct clk.c can be deleted.
Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Remove the fixed factor registration function and helpers. Replace
unnecessary configuration struct with static initialization of the
desired clock type.
Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Remove the fixed_rate registration function and helpers from clkc.[ch].
Replace unnecessary configuration struct with static initialization of
the desired clock type.
While we're here, begin the transition to a proper platform_driver and
call of_clk_add_hw_provider with a shiny new struct clk_hw_onecell_data.
Tested-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Stephen Boyd [Tue, 21 Jun 2016 01:00:16 +0000 (18:00 -0700)]
Merge tag 'clk-samsung-4.8' of git://linuxtv.org/snawrocki/samsung into clk-next
Merge changes from Sylwester Nawrocki for samsung clk drivers:
- a fix for exynos7 to prevent gating some critical CMU clocks,
- addition of CPU clocks for CPU frequency scaling on Exynos5433 SoCs,
- additions for exynos5410 SoC required for Odroid XU board support,
- register accessors fixes for kernels built for big endian operation
(mostly exynos4 SoCs),
- Exynos5433 clock definitions fixes required for suspend to RAM and
the audio subsystem operation,
- many cleanups changing attributes of the clock initializer data
* tag 'clk-samsung-4.8' of git://linuxtv.org/snawrocki/samsung: (41 commits)
clk: samsung: exynos5433: Add CLK_IGNORE_UNUSED flag to PCIE device
clk: samsung: exynos5433: Add CLK_IGNORE_UNUSED flags to avoid hang during S2R
clk: samsung: exynos5433: Add CLK_IGNORE_UNUSED flag for AUD UART
clk: samsung: exynos4: fixup reg access on be
clk: samsung: fixup endian in pll clk
clk: samsung: exynos5410: Add WDT, ACLK266 and SSS clocks
clk: samsung: exynos5433: add CPU clocks configuration data and instantiate CPU clocks
clk: samsung: cpu: prepare for adding Exynos5433 CPU clocks
clk: samsung: exynos5433: prepare for adding CPU clocks
clk: samsung: Suppress unbinding to prevent theoretical attacks
clk: samsung: exynos5420: Set ID for aclk333 gate clock
clk: samsung: exynos5410: Add TMU clock
clk: samsung: exynos5410: Add I2C, HSI2C and RTC clocks
clk: samsung: exynos5410: Add serial3, USB and PWM clocks
clk: samsung: exynos3250: Move PLL rates data to init section
clk: samsung: Fully constify mux parent names
clk: samsung: exynos5250: Move sleep init function to init section
clk: samsung: exynos5420: Move sleep init function and PLL data to init section
clk: samsung: exynos5433: Move PLL rates data to init section
clk: samsung: exynos5433: Constify all clock initializers
...
Peng Fan [Mon, 13 Jun 2016 11:34:21 +0000 (19:34 +0800)]
clk: correct comments for __clk_determine_rate
Correct comments for __clk_determine_rate.
Signed-off-by: Peng Fan <van.freenix@gmail.com> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Roman Volkov [Tue, 7 Jun 2016 21:56:10 +0000 (00:56 +0300)]
clk: vt8500: rework wm8650_find_pll_bits()
PLL clock on WM8650 is calculated in the following way:
M * parent [O1] => / P [O2] => / D [O3]
Where O2 is 600MHz >= (M * parent) / P >= 300MHz.
Current algorithm does not met this requirement, so that the
function may return rates which are not supported by the hardware.
This patch fixes the algorithm and simplifies the code, reducing
the calculation time by ~10000 times (according to usermode app) by
removing the nested loops.
Signed-off-by: Roman Volkov <rvolkov@v1ros.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Arnd Bergmann [Tue, 7 Jun 2016 21:56:09 +0000 (00:56 +0300)]
clk: vt8500: fix gcc-4.9 warnings
This fixes some false positive warnings we get with older compiler
versions:
clk-vt8500.c: In function ‘wm8650_find_pll_bits’:
clk-vt8500.c:430:12: ‘best_div2’ may be used uninitialized in this function
clk-vt8500.c:429:12: ‘best_div1’ may be used uninitialized in this function
clk-vt8500.c:428:14: ‘best_mul’ may be used uninitialized in this function
clk-vt8500.c: In function ‘wm8750_find_pll_bits’:
clk-vt8500.c:509:12: ‘best_div2’ may be used uninitialized in this function
clk-vt8500.c:508:12: ‘best_div1’ may be used uninitialized in this function
clk-vt8500.c:507:14: ‘best_mul’ may be used uninitialized in this function
clk-vt8500.c: In function ‘wm8850_find_pll_bits’:
clk-vt8500.c:560:12: ‘best_div2’ may be used uninitialized in this function
clk-vt8500.c:559:12: ‘best_div1’ may be used uninitialized in this function
clk-vt8500.c:558:14: ‘best_mul’ may be used uninitialized in this function
As the local variables are only use for temporaries, we can just
as well assign the final values directly, which also makes the
code slightly shorter.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Roman Volkov <rvolkov@v1ros.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Ben Dooks [Tue, 7 Jun 2016 16:38:09 +0000 (17:38 +0100)]
clk: at91: make of_sama5d2_clk_generated_setup() static
The of_sama5d2_clk_generated_setup() is not exported outside
of the driver, so make it static to fix the warning about it
being not static:
drivers/clk/at91/clk-generated.c:270:13: warning: symbol 'of_sama5d2_clk_generated_setup' was not declared. Should it be static?
Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Stephen Boyd [Tue, 21 Jun 2016 00:01:45 +0000 (17:01 -0700)]
Merge tag 'v4.7-rockchip-clk-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-fixes
A bunch of fixes. Some for the newly added rk3399 clock tree, some
concerning error handling and initialization and a revert of the
mmc-phase clock initialization, as this could conflict with the
bootloader setting of this clock and a real solution to initing
the phase correctly from dw_mmc went in as fix for 4.7 through
the mmc tree.
* tag 'v4.7-rockchip-clk-fixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
clk: rockchip: release io resource when failing to init clk on rk3399
clk: rockchip: fix cpuclk registration error handling
clk: rockchip: Revert "clk: rockchip: reset init state before mmc card initialization"
clk: rockchip: fix incorrect parent for rk3399's {c,g}pll_aclk_perihp_src
clk: rockchip: mark rk3399 GIC clocks as critical
clk: rockchip: initialize flags of clk_init_data in mmc-phase clock
Wei Yongjun [Fri, 17 Jun 2016 17:24:23 +0000 (17:24 +0000)]
clk: Fix return value check in oxnas_stdclk_probe()
In case of error, the function syscon_node_to_regmap() returns
ERR_PTR() and never returns NULL. The NULL test in the return
value check should be replaced with IS_ERR().
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Fixes: 0bbd72b4c64f ("clk: Add Oxford Semiconductor OXNAS Standard Clocks") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Maxime Ripard [Mon, 16 May 2016 12:47:02 +0000 (14:47 +0200)]
clk: multiplier: Prevent the multiplier from under / over flowing
In the current multiplier base clock implementation, if the
CLK_SET_RATE_PARENT flag isn't set, the code will not make sure that the
multiplier computed remains within the boundaries of our clock.
This means that if the clock we want to reach is below the parent rate,
or if the multiplier is above the maximum that we can reach, we will end up
with a completely bogus one that the clock cannot achieve.
Fixes: f2e0a53271a4 ("clk: Add a basic multiplier clock") Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/1463402840-17062-3-git-send-email-maxime.ripard@free-electrons.com
Paul E. McKenney [Tue, 26 Apr 2016 21:02:23 +0000 (14:02 -0700)]
clk: Use _rcuidle suffix to allow clk_core_enable() to used from idle
This commit fixes the RCU use-from-idle bug corresponding the following
splat:
> [ INFO: suspicious RCU usage. ]
> 4.6.0-rc5-next-20160426+ #1127 Not tainted
> -------------------------------
> include/trace/events/clk.h:45 suspicious rcu_dereference_check() usage!
>
> other info that might help us debug this:
>
>
> RCU used illegally from idle CPU!
> rcu_scheduler_active = 1, debug_locks = 0
> RCU used illegally from extended quiescent state!
> 2 locks held by swapper/0/0:
> #0: (&oh->hwmod_key#30){......}, at: [<c0121afc>] omap_hwmod_enable+0x18/0x44
> #1: (enable_lock){......}, at: [<c0630684>] clk_enable_lock+0x18/0x124
>
> stack backtrace:
> CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.6.0-rc5-next-20160426+ #1127
> Hardware name: Generic OMAP36xx (Flattened Device Tree)
> [<c0110290>] (unwind_backtrace) from [<c010c3a8>] (show_stack+0x10/0x14)
> [<c010c3a8>] (show_stack) from [<c047fd68>] (dump_stack+0xb0/0xe4)
> [<c047fd68>] (dump_stack) from [<c06315c0>] (clk_core_enable+0x1e0/0x36c)
> [<c06315c0>] (clk_core_enable) from [<c0632298>] (clk_enable+0x1c/0x38)
> [<c0632298>] (clk_enable) from [<c01204e0>] (_enable_clocks+0x18/0x7c)
> [<c01204e0>] (_enable_clocks) from [<c012137c>] (_enable+0x114/0x2ec)
> [<c012137c>] (_enable) from [<c0121b08>] (omap_hwmod_enable+0x24/0x44)
> [<c0121b08>] (omap_hwmod_enable) from [<c0122ad0>] (omap_device_enable+0x3c/0x90)
> [<c0122ad0>] (omap_device_enable) from [<c0122b34>] (_od_runtime_resume+0x10/0x38)
> [<c0122b34>] (_od_runtime_resume) from [<c052cc00>] (__rpm_callback+0x2c/0x60)
> [<c052cc00>] (__rpm_callback) from [<c052cc54>] (rpm_callback+0x20/0x80)
> [<c052cc54>] (rpm_callback) from [<c052df7c>] (rpm_resume+0x3d0/0x6f0)
> [<c052df7c>] (rpm_resume) from [<c052e2e8>] (__pm_runtime_resume+0x4c/0x64)
> [<c052e2e8>] (__pm_runtime_resume) from [<c04bf2c4>] (omap2_gpio_resume_after_idle+0x54/0x68)
> [<c04bf2c4>] (omap2_gpio_resume_after_idle) from [<c01269dc>] (omap3_enter_idle_bm+0xfc/0x1ec)
> [<c01269dc>] (omap3_enter_idle_bm) from [<c0601888>] (cpuidle_enter_state+0x80/0x3d4)
> [<c0601888>] (cpuidle_enter_state) from [<c0183b08>] (cpu_startup_entry+0x198/0x3a0)
> [<c0183b08>] (cpu_startup_entry) from [<c0b00c0c>] (start_kernel+0x354/0x3c8)
> [<c0b00c0c>] (start_kernel) from [<8000807c>] (0x8000807c)
Reported-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Cc: Russell King <linux@arm.linux.org.uk> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: <linux-omap@vger.kernel.org> Cc: <linux-arm-kernel@lists.infradead.org> Cc: <linux-clk@vger.kernel.org>
Paul E. McKenney [Tue, 26 Apr 2016 19:43:57 +0000 (12:43 -0700)]
clk: Add _rcuidle tracepoints to allow clk_core_disable() use from idle
This commit adds an _rcuidle suffix to a pair of trace events to
prevent the following splat:
> ===============================
> [ INFO: suspicious RCU usage. ]
> 4.6.0-rc5-next-20160426+ #1114 Not tainted
> -------------------------------
> include/trace/events/clk.h:59 suspicious rcu_dereference_check() usage!
>
> other info that might help us debug this:
>
>
> RCU used illegally from idle CPU!
> rcu_scheduler_active = 1, debug_locks = 0
> RCU used illegally from extended quiescent state!
> 2 locks held by swapper/0/0:
> #0: (&oh->hwmod_key#30){......}, at: [<c0121b40>] omap_hwmod_idle+0x18/0x44
> #1: (enable_lock){......}, at: [<c0630998>] clk_enable_lock+0x18/0x124
>
> stack backtrace:
> CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.6.0-rc5-next-20160426+ #1114
> Hardware name: Generic OMAP36xx (Flattened Device Tree)
> [<c0110290>] (unwind_backtrace) from [<c010c3a8>] (show_stack+0x10/0x14)
> [<c010c3a8>] (show_stack) from [<c047fd68>] (dump_stack+0xb0/0xe4)
> [<c047fd68>] (dump_stack) from [<c0631618>] (clk_core_disable+0x17c/0x348)
> [<c0631618>] (clk_core_disable) from [<c0632774>] (clk_disable+0x24/0x30)
> [<c0632774>] (clk_disable) from [<c0120590>] (_disable_clocks+0x18/0x7c)
> [<c0120590>] (_disable_clocks) from [<c0121680>] (_idle+0x12c/0x230)
> [<c0121680>] (_idle) from [<c0121b4c>] (omap_hwmod_idle+0x24/0x44)
> [<c0121b4c>] (omap_hwmod_idle) from [<c0122c24>] (omap_device_idle+0x3c/0x90)
> [<c0122c24>] (omap_device_idle) from [<c052cc00>] (__rpm_callback+0x2c/0x60)
> [<c052cc00>] (__rpm_callback) from [<c052cc54>] (rpm_callback+0x20/0x80)
> [<c052cc54>] (rpm_callback) from [<c052d150>] (rpm_suspend+0x100/0x768)
> [<c052d150>] (rpm_suspend) from [<c052ec58>] (__pm_runtime_suspend+0x64/0x84)
> [<c052ec58>] (__pm_runtime_suspend) from [<c04bf25c>] (omap2_gpio_prepare_for_idle+0x5c/0x70)
> [<c04bf25c>] (omap2_gpio_prepare_for_idle) from [<c0125568>] (omap_sram_idle+0x140/0x244)
> [<c0125568>] (omap_sram_idle) from [<c01269dc>] (omap3_enter_idle_bm+0xfc/0x1ec)
> [<c01269dc>] (omap3_enter_idle_bm) from [<c0601bdc>] (cpuidle_enter_state+0x80/0x3d4)
> [<c0601bdc>] (cpuidle_enter_state) from [<c0183b08>] (cpu_startup_entry+0x198/0x3a0)
> [<c0183b08>] (cpu_startup_entry) from [<c0b00c0c>] (start_kernel+0x354/0x3c8)
> [<c0b00c0c>] (start_kernel) from [<8000807c>] (0x8000807c)
Reported-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Tested-by: Tony Lindgren <tony@atomide.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Cc: Russell King <linux@arm.linux.org.uk> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Michael Turquette <mturquette@baylibre.com> Cc: Stephen Boyd <sboyd@codeaurora.org> Cc: <linux-omap@vger.kernel.org> Cc: <linux-arm-kernel@lists.infradead.org> Cc: <linux-clk@vger.kernel.org>
clk: renesas: cpg-mssr: Extract common R-Car Gen3 support code
Extract the code to support parts common to all members of the R-Car
Gen3 SoC family into a separate file, to ease sharing among SoC-specific
drivers.
Note that while the cpg_pll_configs[] arrays and the selection of the
config based on the MODE bits are identical on R-Car H3 and R-Car M3-W,
they are not common, and may be different on other R-Car Gen3 SoCs.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Simon Horman <horms+renesas@verge.net.au>
Add all R-Car M3-W Clock Pulse Generator Core Clock Outputs, as listed
in Table 8.2b ("List of Clocks [R-Car M3-W]") of the R-Car Gen3
datasheet (rev. 0.51 + Errata for Rev051 Mar 31 2016).
Note that internal CPG clocks (S0, S1, S2, S3, SDSRC, and SSPSRC) are
not included, as they are used as internal clock sources only, and never
referenced from DT.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Simon Horman <horms+renesas@verge.net.au>
clk: samsung: cpu: prepare for adding Exynos5433 CPU clocks
Exynos5433 uses different register layout for CPU clock registers
than earlier SoCs so add new code for handling this layout. Also
add new CLK_CPU_HAS_E5433_REGS_LAYOUT flag to request using it.
There should be no functional change resulting from this patch.
Cc: Kukjin Kim <kgene@kernel.org> CC: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
clk: samsung: Suppress unbinding to prevent theoretical attacks
Although unbinding a driver requires root privileges but it still might
be used theoretically in certain attacks (by triggering NULL pointer
exception or memory corruption if driver does not provide proper remove
callbacks or core does not handle it).
Samsung clock drivers are essential for system operation so their
removal is not expected. More over, the Exynos3250 ISP clock driver does
not implement remove() driver callback and it is not buildable as
modules.
Suppress the unbind interface for Exynos3250 ISP and S3C2410 DCLK clock
drivers.
Suggested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
clk: samsung: exynos5420: Set ID for aclk333 gate clock
The aclk333 clock needs to be ungated during the MFC power domain switch,
so set the clock ID to allow the Exynos power domain logic to lookup this
clock if is defined in the MFC PD device tree node.
Signed-off-by: Javier Martinez Canillas <javier@osg.samsung.com> Reviewed-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
The PNAME macro defines array of strings for names of mux parents.
Although the strings itself were const but pointers to them were not thus
this data resided in initdata. Make this an array of const pointers to
const strings and move to initconst section.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
clk: samsung: exynos5420: Move sleep init function and PLL data to init section
The exynos5420_clk_sleep_init() function and arrays with initialization
data of PLLs can be moved to init section because they are referenced
only from other init-level symbols.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
clk: samsung: Constify clock init data with clock arrays
samsung_cmu_register_one() can accept pointer to const initialization
data: struct samsung_cmu_info. The members of the latter can also be
pointers to const data.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
This patch adds CLK_IS_CRITICAL flag to ACLK_CCORE_133 and ACLK_FSYS0_200
clocks. These clocks are critical for accessing CMU_CCORE and CMU_FSYS0
blocks registers. Let these clocks to be enabled all the time.
Signed-off-by: Alim Akhtar <alim.akhtar@samsung.com> Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Douglas Anderson [Thu, 12 May 2016 18:03:16 +0000 (11:03 -0700)]
clk: rockchip: Revert "clk: rockchip: reset init state before mmc card initialization"
This reverts commit 7a03fe6f48f3 ("clk: rockchip: reset init state
before mmc card initialization").
Though not totally obvious from the commit message nor from the source
code, that commit appears to be trying to reset the "_drv" MMC clocks to
90 degrees (note that the "_sample" MMC clocks have a shift of 0 so are
not touched).
The major problem here is that it doesn't properly reset things. The
phase is a two bit field and the commit only touches one of the two
bits. Thus the commit had the following affect:
- phase 0 => phase 90
- phase 90 => phase 90
- phase 180 => phase 270
- phase 270 => phase 270
Things get even weirder if you happen to have a bootloader that was
actually using delay elements (should be no reason to, but you never
know), since those are additional bits that weren't touched by the
original patch.
This is unlikely to be what we actually want. Checking on rk3288-veyron
devices, I can see that the bootloader leaves these clocks as:
- emmc: phase 180
- sdmmc: phase 90
- sdio0: phase 90
Thus on rk3288-veyron devices the commit we're reverting had the effect
of changing the eMMC clock to phase 270. This probably explains the
scattered reports I've heard of eMMC devices not working on some veyron
devices when using the upstream kernel.
The original commit was presumably made because previously the kernel
didn't touch the "_drv" phase at all and relied on whatever value was
there when the kernel started. If someone was using a bootloader that
touched the "_drv" phase then, indeed, we should have code in the kernel
to fix that. ...and also, to get ideal timings, we should also have the
kernel change the phase depending on the speed mode. In fact, that's
the subject of a recent patch I posted at
<https://patchwork.kernel.org/patch/9075141/>.
Ideally, we should take both the patch posted to dw_mmc and this
revert. Since those will likely go through different trees, here I
describe behavior with the combos:
1. Just this revert: likely will fix rk3288-veyron eMMC on some devices
+ other cases; might break someone with a strange bootloader that
sets the phase to 0 or one that uses delay elements (pretty
unpredicable what would happen in that case).
2. Just dw_mmc patch: fixes everyone. Effectly the dw_mmc patch will
totally override the broken patch and fix everything.
3. Both patches: fixes everyone. Once dw_mmc is initting properly then
any defaults from the clock code doesn't mattery.
Fixes: 7a03fe6f48f3 ("clk: rockchip: reset init state before mmc card initialization") Signed-off-by: Douglas Anderson <dianders@chromium.org> Reviewed-by: Shawn Lin <shawn.lin@rock-chips.com>
[emmc and sdmmc still work on all current boards in mainline after this
revert, so they should take precedence over any out-of-tree board that
will hopefully again get fixed with the better upcoming dw_mmc change.] Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Brian Norris <briannorris@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
projects / karo-tx-linux.git / log