drm: rcar-du: Fix plane state free in plane reset handler
The plane reset handler frees the plane state and allocates a new
default state, but when doing so attempt to free the plane state using
the base plane state pointer instead of casting it to the
driver-specific state object that has been allocated. Fix it by using
the rcar_du_plane_atomic_destroy_state() function to destroy the plane
state instead of duplicating the code.
Since commit a483dcbfa21f919c ("ARM: shmobile: lager: Remove legacy
board support"), R-Car Gen2 SoCs are only supported in generic DT-only
ARM multi-platform builds. The driver doesn't need to match platform
devices by name anymore, hence remove the corresponding
platform_device_id entry.
Dave Airlie [Fri, 16 Oct 2015 00:25:49 +0000 (10:25 +1000)]
Merge branch 'drm-dwhdmi-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-arm into drm-next
This series:
* adds support for interlaced video modes to the ipu-v3 driver
and dw_hdmi bridge.
* reworks the dw_hdmi connector enable/disable support, to ensure that
when DRM disables the output, it stays disabled irrespective of the
hotplug state.
* adds support for connector forcing, so we can force the hotplug state
for this connector.
* adds the ALSA AHB audio driver to the bridge: Iwai has acked the
audio driver.
* a few fixes to the ACR calculations to allow more modes to work with
audio on iMX6.
Fabio has independently tested this series, so all patches here carry
his tested-by tag.
* 'drm-dwhdmi-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
drm: bridge/dw_hdmi: replace CTS calculation for the ACR
drm: bridge/dw_hdmi: remove ratio support from ACR code
drm: bridge/dw_hdmi: adjust pixel clock values in N calculation
drm: bridge/dw_hdmi: avoid being recursive in N calculation
drm: bridge/dw_hdmi-ahb-audio: allow larger buffer sizes
drm: bridge/dw_hdmi-ahb-audio: basic support for multi-channel PCM audio
drm: bridge/dw_hdmi-ahb-audio: parse ELD from HDMI driver
drm: bridge/dw_hdmi-ahb-audio: add audio driver
drm: bridge/dw_hdmi: improve HDMI enable/disable handling
drm: bridge/dw_hdmi: add connector mode forcing
drm: bridge/dw_hdmi: add support for interlaced video modes
gpu: imx: fix support for interlaced modes
gpu: imx: simplify sync polarity setting
Dave Airlie [Fri, 16 Oct 2015 00:02:35 +0000 (10:02 +1000)]
Merge tag 'topic/drm-misc-2015-10-08' of git://anongit.freedesktop.org/drm-intel into drm-next
Another round of drm-misc. Unfortunately the DRM_UNLOCKED removal for
DRIVER_MODESET isn't complete yet for lack of review on 1-2 patches.
Otherwise just various stuff all over.
* tag 'topic/drm-misc-2015-10-08' of git://anongit.freedesktop.org/drm-intel:
drm: Stop using drm_vblank_count() as the hw frame counter
drm/irq: Use unsigned int pipe in public API
drm: Use DRM_ROTATE_MASK and DRM_REFLECT_MASK
drm: Add DRM_ROTATE_MASK and DRM_REFLECT_MASK
vga_switcheroo: Add missing locking
vgaarb: use kzalloc in vga_arbiter_add_pci_device()
drm: Don't zero vblank timestamps from the irq handler
drm: Hack around CONFIG_AGP=m build failures
drm/i915: Remove setparam ioctl
drm: Remove dummy agp ioctl wrappers
drm/vmwgfx: Stop checking for DRM_UNLOCKED
drm/drm_ioctl.c: kerneldoc
drm: Define a drm_invalid_op ioctl implementation
drm: Remove __OS_HAS_AGP
drm/doc: Update docs about device instance setup
Dave Airlie [Thu, 15 Oct 2015 23:59:19 +0000 (09:59 +1000)]
Merge tag 'drm-intel-next-2015-09-28-merged' of git://anongit.freedesktop.org/drm-intel into drm-next
drm-intel-next-2015-09-28:
- fastboot by default for some systems (Maarten Lankhorts)
- piles of workarounds for bxt and skl
- more fbc work from Paulo
- fix hdmi hotplug detection (Sonika)
- first few patches from Ville to parametrize register macros, prep work for
typesafe mmio functions
- prep work for nv12 rotation (Tvrtko Ursulin)
- various other bugfixes and improvements all over
I have another backmerge here since things became messy and I didn't
realize you resolved some of them already (usually you complain when
there's a conflict ...).
For 4.4 I plan one more feature round after this and then that's it.
* tag 'drm-intel-next-2015-09-28-merged' of git://anongit.freedesktop.org/drm-intel: (80 commits)
drm/i915: Update DRIVER_DATE to 20150928
drm/i915: fix task reference leak in i915_debugfs.c
drm/i915: Defer adding preallocated stolen objects to the VM list
drm/i915: Remove extraneous request cancel.
drm/i915: Enable querying offset of UV plane with intel_plane_obj_offset
drm/i915: Support NV12 in rotated GGTT mapping
drm/i915: Support appending to the rotated pages mapping
drm/i915: Support planar formats in tile height calculations
drm/i915/bxt: Update revision id for BXT C0
drm/i915: Parametrize CSR_PROGRAM registers
drm/i915: Parametrize DDI_BUF_TRANS registers
drm/i915: Parametrize TV luma/chroma filter registers
drm/i915: Replace raw numbers with the approproate register name in ILK turbo code
drm/i915: Parametrize ILK turbo registers
drm/i915: Parametrize FBC_TAG registers
drm/i915: Parametrize GEN7_GT_SCRATCH and GEN7_LRA_LIMITS
drm/i915: Parametrize LRC registers
drm/i915: Don't pass sdvo_reg to intel_sdvo_select_{ddc, i2c}_bus()
drm/i915: Ignore "digital output" and "not HDMI output" bits for eDP detection
drm/i915: Make sure we don't detect eDP on g4x
...
Dave Airlie [Thu, 15 Oct 2015 23:39:14 +0000 (09:39 +1000)]
Merge branch 'drm-next-4.4' of git://people.freedesktop.org/~agd5f/linux into drm-next
This is the first radeon and amdgpu pull for drm-next. Highlights include:
- Efficiency improvements to the CS checker for pre-SI asics
- Cursor fixes ported from radeon to amdgpu
- Enable GPU scheduler by default
- Add a bunch of GPUVM debugging options
- Add support for some new atombios opcodes
- Misc cleanups and fixes
* 'drm-next-4.4' of git://people.freedesktop.org/~agd5f/linux: (42 commits)
drm/amdgpu: fix lockup when clean pending fences
drm/amdgpu: add timer to fence to detect scheduler lockup
drm/amdgpu: add VM CS mapping trace point
drm/amdgpu: add option to clear VM page tables after every submit
drm/amdgpu: add option to stop on VM fault
drm/amdgpu: only print meaningful VM faults
drm/amdgpu: also trace already allocated VMIDs
drm/amdgpu: Drop unnecessary #include <linux/vga_switcheroo.h>
drm/radeon: Drop unnecessary #include <linux/vga_switcheroo.h>
drm/amdgpu: clean up pageflip interrupt handling
drm/amdgpu: rework sdma structures
drm/amdgpu: unpin cursor BOs on suspend and pin them again on resume
drm/amdgpu/dce8: Fold set_cursor() into show_cursor()
drm/amdgpu/dce8: Clean up reference counting and pinning of the cursor BOs
drm/amdgpu/dce8: Move hotspot handling out of set_cursor
drm/amdgpu/dce8: Re-show the cursor after a modeset (v2)
drm/amdgpu/dce8: Use cursor_set2 hook for enabling / disabling the HW cursor
drm/amdgpu/dce11: Fold set_cursor() into show_cursor()
drm/amdgpu/dce11: Clean up reference counting and pinning of the cursor BOs
drm/amdgpu/dce11: Move hotspot handling out of set_cursor
...
Dave Airlie [Thu, 15 Oct 2015 04:17:13 +0000 (14:17 +1000)]
Merge branch 'drm-tda998x-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-arm into drm-next
* removes the now unused DRM slave encoder support, which all users have
migrated away from, allowing us to simplify the code.
* ensure all pending interrupts are processed together, rather than
needing the handler to be re-entered each time.
* use more HDMI helpers to setup the info frames.
* fix EDID read handling by ensuring that we always wait the specified time
before attempting to read the EDID, no matter where the EDID read request
came from.
* 'drm-tda998x-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
drm/i2c: tda998x: clean up after struct tda998x_priv2 removal
drm/i2c: tda998x: kill struct tda998x_priv2
drm/i2c: tda998x: move connector into struct tda998x_priv
drm/i2c: tda998x: remove encoder pointer
drm/i2c: tda998x: remove DRM slave encoder support
drm/i2c: tda998x: use more HDMI helpers
drm/i2c: tda998x: handle all outstanding interrupts
drm/i2c: tda998x: convert to u8/u16/u32 types
drm/i2c: tda998x: re-implement "Fix EDID read timeout on HDMI connect"
drm/i2c: tda998x: report whether we actually handled the IRQ
drm/i2c: tda998x: remove useless NULL checks
Dave Airlie [Thu, 15 Oct 2015 04:02:47 +0000 (14:02 +1000)]
Merge branch 'drm-armada-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-arm into drm-next
* remove support for the non-component support from the Armada DRM driver,
switching it to component-only mode.
* create a "armada plane" to allow the primary and overlay planes to share
some code.
* increase efficiency by using inherently atomic operations, rather than
spinlocking to achieve atomicity. Eg, if we want to exchange a value,
using xchg().
* increase PM savings by stopping the external pixel clock when we're in
DPMS mode.
* 'drm-armada-devel' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
drm/armada: move frame wait wakeup into plane work
drm/armada: convert overlay plane vbl worker to a armada plane worker
drm/armada: move CRTC flip work to primary plane work
drm/armada: move frame wait into armada_frame
drm/armada: move the locking for armada_drm_vbl_event_remove()
drm/armada: move the update of dplane->ctrl0 out of spinlock
drm/armada: move write to dma_ctrl0 to armada_drm_crtc_plane_disable()
drm/armada: provide a common helper to disable a plane
drm/armada: allocate primary plane ourselves
drm/armada: add primary plane creation
drm/armada: introduce generic armada_plane struct
drm/armada: update armada overlay to use drm_universal_plane_init()
drm/armada: use xchg() to atomically update dplane->old_fb
drm/armada: factor out retirement of old fb
drm/armada: rename overlay identifiers
drm/armada: redo locking and atomics for armada_drm_crtc_complete_frame_work()
drm/armada: disable CRTC clock during DPMS
drm/armada: use drm_plane_force_disable() to disable the overlay plane
drm/armada: move vbl code into armada_crtc
drm/armada: remove non-component support
Junwei Zhang [Tue, 13 Oct 2015 03:14:23 +0000 (11:14 +0800)]
drm/amdgpu: fix lockup when clean pending fences
The first lockup fence will lock the fence list of scheduler.
Then cancel the delayed workqueues for all clean pending fences
without waiting the workqueues to finish.
Change-Id: I9bec826de1aa49d587b0662f3fb4a95333979429 Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
Junwei Zhang [Sat, 10 Oct 2015 00:48:42 +0000 (08:48 +0800)]
drm/amdgpu: add timer to fence to detect scheduler lockup
Change-Id: I67e987db0efdca28faa80b332b75571192130d33 Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com> Reviewed-by: David Zhou <david1.zhou@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com>
Alex Deucher [Thu, 8 Oct 2015 20:30:37 +0000 (16:30 -0400)]
drm/amdgpu: rework sdma structures
Rework the sdma structures in the driver to
consolidate all of the sdma info into a single
structure and allow for asics that may have
different numbers of sdma instances.
Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 8 Oct 2015 04:03:36 +0000 (00:03 -0400)]
drm/amdgpu: unpin cursor BOs on suspend and pin them again on resume
Everything is evicted from VRAM before suspend, so we need to make
sure all BOs are unpinned and re-pinned after resume. Fixes broken
mouse cursor after resume introduced by commit b9729b17.
Alex Deucher [Thu, 8 Oct 2015 15:31:58 +0000 (11:31 -0400)]
drm/amdgpu/dce8: Clean up reference counting and pinning of the cursor BOs
Take a GEM reference for and pin the new cursor BO, unpin and drop the
GEM reference for the old cursor BO in dce8 crtc_cursor_set2, and use
amdgpu_crtc->cursor_addr in dce8 set_cursor.
This fixes dce8 cursor_reset accidentally incrementing the cursor BO
pin count, and cleans up the code a little.
Alex Deucher [Thu, 8 Oct 2015 03:26:15 +0000 (23:26 -0400)]
drm/amdgpu/dce8: Use cursor_set2 hook for enabling / disabling the HW cursor
The cursor_set2 hook provides the cursor hotspot position within the
cursor image. When the hotspot position changes, we can adjust the cursor
position such that the hotspot doesn't move on the screen. This prevents
the cursor from appearing to intermittently jump around on the screen
when the position of the hotspot within the cursor image changes.
Alex Deucher [Thu, 8 Oct 2015 15:28:49 +0000 (11:28 -0400)]
drm/amdgpu/dce11: Clean up reference counting and pinning of the cursor BOs
Take a GEM reference for and pin the new cursor BO, unpin and drop the
GEM reference for the old cursor BO in dce11 crtc_cursor_set2, and use
amdgpu_crtc->cursor_addr in dce11 set_cursor.
This fixes dce11 cursor_reset accidentally incrementing the cursor BO
pin count, and cleans up the code a little.
Alex Deucher [Wed, 7 Oct 2015 21:07:01 +0000 (17:07 -0400)]
drm/amdgpu/dce11: Use cursor_set2 hook for enabling / disabling the HW cursor
The cursor_set2 hook provides the cursor hotspot position within the
cursor image. When the hotspot position changes, we can adjust the cursor
position such that the hotspot doesn't move on the screen. This prevents
the cursor from appearing to intermittently jump around on the screen
when the position of the hotspot within the cursor image changes.
Alex Deucher [Thu, 8 Oct 2015 15:25:38 +0000 (11:25 -0400)]
drm/amdgpu/dce10: Clean up reference counting and pinning of the cursor BOs
Take a GEM reference for and pin the new cursor BO, unpin and drop the
GEM reference for the old cursor BO in dce10 crtc_cursor_set2, and use
amdgpu_crtc->cursor_addr in dce10 set_cursor.
This fixes dce10 cursor_reset accidentally incrementing the cursor BO
pin count, and cleans up the code a little.
Alex Deucher [Thu, 24 Sep 2015 21:29:44 +0000 (17:29 -0400)]
drm/amdgpu/dce10: Use cursor_set2 hook for enabling / disabling the HW cursor
The cursor_set2 hook provides the cursor hotspot position within the
cursor image. When the hotspot position changes, we can adjust the cursor
position such that the hotspot doesn't move on the screen. This prevents
the cursor from appearing to intermittently jump around on the screen
when the position of the hotspot within the cursor image changes.
Linus Torvalds [Tue, 13 Oct 2015 16:45:21 +0000 (09:45 -0700)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"I got a bit behind last week, so here is a delayed fixes pull:
- a bunch of radeon/amd gpu fixes
- some nouveau regression fixes (ppc bios reading and runtime pm fix)
- one drm core oops fix
- two qxl locking fixes
- one qxl regression fix"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/nouveau/bios: fix OF loading
drm/nouveau/fbcon: take runpm reference when userspace has an open fd
drm/nouveau/nouveau: Disable AGP for SiS 761
drm/nouveau/display: allow up to 16k width/height for fermi+
drm/nouveau/bios: translate devinit pri/sec i2c bus to internal identifiers
drm: Fix locking for sysfs dpms file
drm/amdgpu: fix memory leak in amdgpu_vm_update_page_directory
drm/amdgpu: fix 32-bit compiler warning
drm/qxl: avoid dependency lock
drm/qxl: avoid buffer reservation in qxl_crtc_page_flip
drm/qxl: fix framebuffer dirty rectangle tracking.
drm/amdgpu: flag iceland as experimental
drm/amdgpu: check before checking pci bridge registers
drm/amdgpu: fix num_crtc on CZ
drm/amdgpu: restore the fbdev mode in lastclose
drm/radeon: restore the fbdev mode in lastclose
drm/radeon: add quirk for ASUS R7 370
drm/amdgpu: add pm sysfs files late
drm/radeon: add pm sysfs files late
Dave Airlie [Mon, 12 Oct 2015 03:59:04 +0000 (13:59 +1000)]
Merge branch 'linux-4.3' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes
Nothing too crazy here, a couple of regression fixes + runpm/fbcon
race fix.
* 'linux-4.3' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
drm/nouveau/bios: fix OF loading
drm/nouveau/fbcon: take runpm reference when userspace has an open fd
drm/nouveau/nouveau: Disable AGP for SiS 761
drm/nouveau/display: allow up to 16k width/height for fermi+
drm/nouveau/bios: translate devinit pri/sec i2c bus to internal identifiers
Ilia Mirkin [Fri, 2 Oct 2015 03:41:21 +0000 (23:41 -0400)]
drm/nouveau/bios: fix OF loading
Currently OF bios load fails for a few reasons:
- checksum failure
- bios size too small
- no PCIR header
- bios length not a multiple of 4
In this change, we resolve all of the above by ignoring any checksum
failures (since OF VBIOS tends not to have a checksum), and faking the
PCIR data when loading from OF.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 2 Oct 2015 04:03:19 +0000 (14:03 +1000)]
drm/nouveau/fbcon: take runpm reference when userspace has an open fd
We need to do this in order to prevent accesses to the device while it's
powered down. Userspace may have an mmap of the fb, and there's no good
way (that I know of) to prevent it from touching the device otherwise.
This fixes some nasty races between runpm and plymouth on some systems,
which result in the GPU getting very upset and hanging the boot.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org
Ondrej Zary [Mon, 14 Sep 2015 19:19:57 +0000 (21:19 +0200)]
drm/nouveau/nouveau: Disable AGP for SiS 761
SiS 761 chipset does not support AGP cards but has AGP capability (for
the onboard video). At least PC Chips A31G board using this chipset has
an AGP-like AGPro slot that's wired to the PCI bus. Enabling AGP will
fail (GPU lockup and software fbcon, X11 hangs).
Add support for matching just the host bridge in nvkm_device_agp_quirks
and add entry for SiS 761 with mode 0 (AGP disabled).
Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Linus Torvalds [Sun, 11 Oct 2015 17:16:59 +0000 (10:16 -0700)]
Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"Three trivial commits:
- Fix a kerneldoc regression
- Export handle_bad_irq to unbreak a driver in next
- Add an accessor for the of_node field so refactoring in next does
not depend on merge ordering"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqdomain: Add an accessor for the of_node field
genirq: Fix handle_bad_irq kerneldoc comment
genirq: Export handle_bad_irq
Linus Torvalds [Sun, 11 Oct 2015 17:02:30 +0000 (10:02 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is a set of three bug fixes, two of which are regressions from
recent updates (the 3ware one from 4.1 and the device handler fixes
from 4.2)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
3w-9xxx: don't unmap bounce buffered commands
scsi_dh: Use the correct module name when loading device handler
libiscsi: Fix iscsi_check_transport_timeouts possible infinite loop
Linus Torvalds [Sat, 10 Oct 2015 18:17:45 +0000 (11:17 -0700)]
Merge tag 'usb-4.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB and PHY fixes and quirk updates for 4.3-rc5.
Nothing major here, full details in the shortlog, and all of these
have been in linux-next for a while"
* tag 'usb-4.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: Add device quirk for Logitech PTZ cameras
USB: chaoskey read offset bug
USB: Add reset-resume quirk for two Plantronics usb headphones.
usb: renesas_usbhs: Add support for R-Car H3
usb: renesas_usbhs: fix build warning if 64-bit architecture
usb: gadget: bdc: fix memory leak
phy: berlin-sata: Fix module autoload for OF platform driver
phy: rockchip-usb: power down phy when rockchip phy probe
phy: qcom-ufs: fix build error when the component is built as a module
Linus Torvalds [Sat, 10 Oct 2015 18:09:55 +0000 (11:09 -0700)]
Merge tag 'tty-4.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are a few bug fixes for the tty core that resolve reported
issues, and some serial driver fixes as well (including the
much-reported imx driver problem)
All of these have been in linux-next with no reported problems"
* tag 'tty-4.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
drivers/tty: require read access for controlling terminal
serial: 8250: add uart_config entry for PORT_RT2880
tty: fix data race on tty_buffer.commit
tty: fix data race in tty_buffer_flush
tty: fix data race in flush_to_ldisc
tty: fix stall caused by missing memory barrier in drivers/tty/n_tty.c
serial: atmel: fix error path of probe function
tty: don't leak cdev in tty_cdev_add()
Revert "serial: imx: remove unbalanced clk_prepare"
Linus Torvalds [Sat, 10 Oct 2015 18:03:31 +0000 (11:03 -0700)]
Merge tag 'staging-4.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging fixes from Greg KH:
"Here are two tiny staging tree fixes for 4.3-rc5.
One fixes the broken speakup subsystem as reported by a user, and the
other removes an entry in the MAINTAINERS file for a developer that
doesn't want to be listed anymore"
* tag 'staging-4.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: speakup: fix speakup-r regression
MAINTAINERS: Remove myself as nvec co-maintainer
Linus Torvalds [Sat, 10 Oct 2015 17:58:27 +0000 (10:58 -0700)]
Merge tag 'char-misc-4.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small fixes for some misc drivers that resolve some
reported issues. All of these have been linux-next for a while"
* tag 'char-misc-4.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
mcb: Fix error handling in mcb_pci_probe()
mei: hbm: fix error in state check logic
nvmem: sunxi: Check for memory allocation failure
nvmem: core: Fix memory leak in nvmem_cell_write
nvmem: core: Handle shift bits in-place if cell->nbits is non-zero
nvmem: core: fix the out-of-range leak in read/write()
Linus Torvalds [Sat, 10 Oct 2015 17:31:13 +0000 (10:31 -0700)]
Merge branch 'stable/for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb
Pull swiotlb fixlet from Konrad Rzeszutek Wilk:
"Enable the SWIOTLB under 32-bit PAE kernels.
Nowadays most distros enable this due to CONFIG_HYPERVISOR|XEN=y which
select SWIOTLB. But for those that are not interested in
virtualization and wanting to use 32-bit PAE kernels and wanting to
have working DMA operations - this configures it for them"
* 'stable/for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
swiotlb: Enable it under x86 PAE
Trond Myklebust [Fri, 9 Oct 2015 17:44:34 +0000 (13:44 -0400)]
namei: results of d_is_negative() should be checked after dentry revalidation
Leandro Awa writes:
"After switching to version 4.1.6, our parallelized and distributed
workflows now fail consistently with errors of the form:
T34: ./regex.c:39:22: error: config.h: No such file or directory
From our 'git bisect' testing, the following commit appears to be the
possible cause of the behavior we've been seeing: commit 766c4cbfacd8"
Al Viro says:
"What happens is that 766c4cbfacd8 got the things subtly wrong.
We used to treat d_is_negative() after lookup_fast() as "fall with
ENOENT". That was wrong - checking ->d_flags outside of ->d_seq
protection is unreliable and failing with hard error on what should've
fallen back to non-RCU pathname resolution is a bug.
Unfortunately, we'd pulled the test too far up and ran afoul of
another kind of staleness. The dentry might have been absolutely
stable from the RCU point of view (and we might be on UP, etc), but
stale from the remote fs point of view. If ->d_revalidate() returns
"it's actually stale", dentry gets thrown away and the original code
wouldn't even have looked at its ->d_flags.
What we need is to check ->d_flags where 766c4cbfacd8 does (prior to
->d_seq validation) but only use the result in cases where we do not
discard this dentry outright"
Linus Torvalds [Sat, 10 Oct 2015 01:39:04 +0000 (18:39 -0700)]
Merge tag 'pm+acpi-4.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI fixes from Rafael Wysocki:
"These are four fixes for bugs in the devfreq and cpufreq subsystems,
including two regression fixes (one for a recent regression and one
for a problem introduced in 4.2).
Specifics:
- Two fixes for cpufreq regressions, an acpi-cpufreq driver one
introduced during the 4.2 cycle when we started to preserve cpufreq
directories for offline CPUs and a general one introduced recently
(Srinivas Pandruvada).
- Two devfreq fixes, one for a double kfree() in an error code path
and one for a confusing sysfs-related failure (Geliang Tang, Tobias
Jakobi)"
* tag 'pm+acpi-4.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: prevent lockup on reading scaling_available_frequencies
cpufreq: acpi_cpufreq: prevent crash on reading freqdomain_cpus
PM / devfreq: fix double kfree
PM / devfreq: Fix governor_store()
Linus Torvalds [Fri, 9 Oct 2015 23:58:11 +0000 (16:58 -0700)]
Merge tag 'dm-4.3-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull dm fixes from Mike Snitzer:
"Three stable fixes:
- DM core AB-BA deadlock fix in the device destruction path (vs
device creation's DM table swap).
- DM raid fix to properly round up the region_size to the next
power-of-2.
- DM cache fix for a NULL pointer seen while switching from the
"cleaner" cache policy.
Two fixes for regressions introduced during the 4.3 merge:
- request-based DM error propagation regressed due to incorrect
changes introduced when adding the bi_error field to bio.
- DM snapshot fix to only support snapshots that overflow if the
client (e.g. lvm2) is prepared to deal with the associated
snapshot status interface change"
* tag 'dm-4.3-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm snapshot: add new persistent store option to support overflow
dm cache: fix NULL pointer when switching from cleaner policy
dm: fix request-based dm error reporting
dm raid: fix round up of default region size
dm: fix AB-BA deadlock in __dm_destroy()
Linus Torvalds [Fri, 9 Oct 2015 23:39:35 +0000 (16:39 -0700)]
Merge branch 'for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
"These are small and assorted. Neil's is the oldest, I dropped the
ball thinking he was going to send it in"
* 'for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: support NFSv2 export
Btrfs: open_ctree: Fix possible memory leak
Btrfs: fix deadlock when finalizing block group creation
Btrfs: update fix for read corruption of compressed and shared extents
Btrfs: send, fix corner case for reference overwrite detection
Linus Torvalds [Fri, 9 Oct 2015 22:54:14 +0000 (15:54 -0700)]
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"The fixes for this week include one small patch that was years in the
making and that finally fixes using all eight CPUs on exynos542x.
The rest are lots of minor changes for sunxi, imx, exynos and shmobile
- fixing the minimum voltage for Allwinner A20
- thermal boot issue on SMDK5250.
- invalid clock used for FIMD IOMMU.
- audio on Renesas r8a7790/r8a7791
- invalid clock used for FIMD IOMMU
- LEDs on exynos5422-odroidxu3-common
- usb pin control for imx-rex
- imx53: fix PMIC interrupt level
- a Makefile typo"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: dts: Fix wrong clock binding for sysmmu_fimd1_1 on exynos5420
ARM: dts: Fix bootup thermal issue on smdk5250
ARM: shmobile: r8a7791 dtsi: Add CPG/MSTP Clock Domain for sound
ARM: shmobile: r8a7790 dtsi: Add CPG/MSTP Clock Domain for sound
arm-cci500: Don't enable PMU driver by default
ARM: dts: fix usb pin control for imx-rex dts
ARM: imx53: qsrb: fix PMIC interrupt level
ARM: imx53: include IRQ dt-bindings header
ARM: dts: add suspend opp to exynos4412
ARM: dts: Fix LEDs on exynos5422-odroidxu3
ARM: EXYNOS: reset Little cores when cpu is up
ARM: dts: Fix Makefile target for sun4i-a10-itead-iteaduino-plus
ARM: dts: sunxi: Raise minimum CPU voltage for sun7i-a20 to meet SoC specifications
Mike Snitzer [Thu, 8 Oct 2015 22:05:41 +0000 (18:05 -0400)]
dm snapshot: add new persistent store option to support overflow
Commit 76c44f6d80 introduced the possibly for "Overflow" to be reported
by the snapshot device's status. Older userspace (e.g. lvm2) does not
handle the "Overflow" status response.
Fix this incompatibility by requiring newer userspace code, that can
cope with "Overflow", request the persistent store with overflow support
by using "PO" (Persistent with Overflow) for the snapshot store type.
Russell King [Wed, 22 Jul 2015 15:54:37 +0000 (16:54 +0100)]
drm: bridge/dw_hdmi: replace CTS calculation for the ACR
Given the TDMS clock, audio sample rate, and the N parameter, we can
calculate the CTS value for the audio clock regenerator (ACR) using the
following calculation given in the HDMI specification:
CTS = ftdms * N / (128 * fs)
The specification says that the CTS value is an average value, which is
true if the source hardware measures it. Where source hardware needs it
to be programmed, it is particularly difficult to alternate between two
values correctly to ensure that we achieve a correct "average"
fractional value at the sink.
Also, there's the problem that our "ftdms" is not a fully accurate
value; it is rounded to a kHz value. This introduces an unnecessary
(and harmless) fractional value into the above equation for combinations
like 148.5MHz/1.001 for 44100Hz - we still calculate the correct CTS
value.
Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Wed, 22 Jul 2015 10:28:16 +0000 (11:28 +0100)]
drm: bridge/dw_hdmi: remove ratio support from ACR code
We never set the ratio for CTS/N calculation for the audio clock
regenerator (ACR) to anything but 100, so this adds pointless
complexity. Should we support pixel repetition, we should update the
CTS/N calculation code to use those parameters or the actual TMDS clock
rate instead of a ratio.
Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Wed, 22 Jul 2015 09:39:27 +0000 (10:39 +0100)]
drm: bridge/dw_hdmi: adjust pixel clock values in N calculation
Adjust the pixel clock values in the N calculation to match the more
accurate clock values we're given by the DRM subsystem, which are the
kHz pixel rate, with any fractional kHz rounded down in the case of
the non-240, non-480 line modes, or rounded up for the others. So,
DRM derives these rates from the EDID CEA mode identifiers, which are
looked up in the tables in drivers/gpu/drm/drm_edid.c. The values on
the right are the clock values found in these tables, and are
currently expected to be passed to the HDMI driver unchanged.
Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Wed, 22 Jul 2015 09:35:41 +0000 (10:35 +0100)]
drm: bridge/dw_hdmi: avoid being recursive in N calculation
There's no need to be recursive when computing the N value for the ACR
packet - we can instead calculate the multiplier prior to our switch()
based lookup, and multiply the N value appropriately afterwards.
Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
With multichannel audio, we need to allow larger buffer sizes to avoid
XRUNs during playback. Push the buffer size up to 1024K, but as we
maintain two buffers, ensure that the vmalloc buffer does not exceed
the userspace buffer size.
Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Thu, 4 Jun 2015 09:13:28 +0000 (10:13 +0100)]
drm: bridge/dw_hdmi-ahb-audio: basic support for multi-channel PCM audio
Add basic support for multi-channel PCM audio, with fixed speaker
mappings. This has been tested with an AV receiver, and appears to
work for low sample rates up to 8 channels.
It should be noted that multi-channel mode using the IEC958 alsa-lib
conversion plugin requires correct AES channel status for the AV
receiver to recognise the stream, especially the sample rate bits.
"Not identified" does not work there.
Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Thu, 7 Nov 2013 16:06:01 +0000 (16:06 +0000)]
drm: bridge/dw_hdmi-ahb-audio: parse ELD from HDMI driver
Parse the ELD (EDID like data) stored from the HDMI driver to restrict
the sample rates and channels which are available to ALSA. This causes
the ALSA device to reflect the capabilities of the overall audio path,
not just what is supported at the HDMI source interface level.
Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Russell King [Thu, 7 Nov 2013 16:01:45 +0000 (16:01 +0000)]
drm: bridge/dw_hdmi-ahb-audio: add audio driver
Add ALSA based HDMI AHB audio driver for dw_hdmi. The only buffer
format supported by the hardware is its own special IEC958 based format,
which is not compatible with any ALSA format. To avoid doing too much
data manipulation within the driver, we support only ALSAs IEC958 LE and
24-bit PCM formats for 2 to 6 channels, which we convert to its hardware
format.
A more desirable solution would be to have this conversion in userspace,
but ALSA does not appear to allow such transformations outside of
libasound itself.
Reviewed-by: Takashi Iwai <tiwai@suse.de> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Marc Zyngier [Fri, 9 Oct 2015 14:50:11 +0000 (15:50 +0100)]
irqdomain: Add an accessor for the of_node field
As we're about to remove the of_node field from the irqdomain
structure, introduce an accessor for it. Subsequent patches
will take care of the actual repainting.
Joe Thornber [Fri, 9 Oct 2015 13:03:38 +0000 (14:03 +0100)]
dm cache: fix NULL pointer when switching from cleaner policy
The cleaner policy doesn't make use of the per cache block hint space in
the metadata (unlike the other policies). When switching from the
cleaner policy to mq or smq a NULL pointer crash (in dm_tm_new_block)
was observed. The crash was caused by bugs in dm-cache-metadata.c
when trying to skip creation of the hint btree.
The minimal fix is to change hint size for the cleaner policy to 4 bytes
(only hint size supported).
Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org
Daniel Vetter [Tue, 29 Sep 2015 07:56:53 +0000 (09:56 +0200)]
drm: Fix locking for sysfs dpms file
With atomic drivers we need to make sure that (at least in general)
property reads hold the right locks. But the legacy dpms property is
special and can be read locklessly. Since userspace loves to just
randomly look at that all the time (like with "status") do that.
To make it clear that we play tricks use the READ_ONCE compiler
barrier (and also for paranoia).
Note that there's not really anything bad going on since even with the
new atomic paths we eventually end up not chasing any pointers (and
hence possibly freed memory and other fun stuff). The locking WARNING
has been added in
Dave Airlie [Fri, 9 Oct 2015 00:06:18 +0000 (10:06 +1000)]
Merge branch 'drm-fixes-4.3' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
radeon and amdgpu fixes for 4.3. Highlights:
- Move pm sysfs setup later in the driver init process to avoid
problems with laptop scripts attempting to change pm settings
before the driver has finished setting up the pm hardware.
- Fix console restore if a drm app (e.g. X) is forcibly killed
- Flag iceland support as experimental for now
- Misc bug fixes
* 'drm-fixes-4.3' of git://people.freedesktop.org/~agd5f/linux:
drm/amdgpu: fix memory leak in amdgpu_vm_update_page_directory
drm/amdgpu: fix 32-bit compiler warning
drm/amdgpu: flag iceland as experimental
drm/amdgpu: check before checking pci bridge registers
drm/amdgpu: fix num_crtc on CZ
drm/amdgpu: restore the fbdev mode in lastclose
drm/radeon: restore the fbdev mode in lastclose
drm/radeon: add quirk for ASUS R7 370
drm/amdgpu: add pm sysfs files late
drm/radeon: add pm sysfs files late
Mikulas Patocka [Thu, 1 Oct 2015 19:17:43 +0000 (15:17 -0400)]
crash in md-raid1 and md-raid10 due to incorrect list manipulation
The commit 55ce74d4bfe1b9444436264c637f39a152d1e5ac (md/raid1: ensure
device failure recorded before write request returns) is causing crash in
the LVM2 testsuite test shell/lvchange-raid.sh. For me the crash is 100%
reproducible.
The reason for the crash is that the newly added code in raid1d moves the
list from conf->bio_end_io_list to tmp, then tests if tmp is non-empty and
then incorrectly pops the bio from conf->bio_end_io_list (which is empty
because the list was alrady moved).
cpufreq: prevent lockup on reading scaling_available_frequencies
When scaling_available_frequencies is read on an offlined cpu, then
either lockup or junk values are displayed. This is caused by
freed freq_table, which policy is using.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
cpufreq: acpi_cpufreq: prevent crash on reading freqdomain_cpus
When freqdomain_cpus attribute is read from an offlined cpu, it will
cause crash. This change prevents calling cpufreq_show_cpus when
policy driver_data is NULL.
mmc: sdhci-of-at91: use SDHCI_QUIRK2_NEED_DELAY_AFTER_INT_CLK_RST quirk
The Atmel sdhci device needs the
SDHCI_QUIRK2_NEED_DELAY_AFTER_INT_CLK_RST quirk. Without it, the
internal clock could never stabilised when changing the sd clock
frequency.
The Atmel sdhci device needs a new quirk. sdhci_set_clock set the Clock
Control Register to 0 before computing the new value and writing it.
It disables the internal clock which causes a reset mecanism. If we
write the new value before this reset mecanism is done, it will prevent
the stabilisation of the internal clock, so a delay is needed. This
delay is about 2-3 cycles of the base clock. To be safe, a 1 ms delay is
used.
Nadav Haklai [Tue, 6 Oct 2015 01:22:36 +0000 (03:22 +0200)]
mmc: sdhci-pxav3: disable clock inversion for HS MMC cards
According to 'FE-2946959' erratum the clock inversion option is
needed to support slow frequencies when the card input hold time
requirement is high. This setting is not required for high speed
MMC and might cause timing violation.
Nadav Haklai [Tue, 6 Oct 2015 01:22:35 +0000 (03:22 +0200)]
mmc: sdhci-pxav3: remove broken clock base quirk for Armada 38x sdhci driver
shci-pxav3 driver is enabling by default the
SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN quirk. However this quirk is not
required for Armada 38x and leads to wrong clock setting in the divider.