The dqc_bitmap field of struct ocfs2_local_disk_chunk is 32-bit aligned,
but not 64-bit aligned.  The dqc_bitmap is accessed by ocfs2_set_bit(),
ocfs2_clear_bit(), ocfs2_test_bit(), or ocfs2_find_next_zero_bit().  These
are wrapper macros for ext2_*_bit() which need to take an unsigned long
aligned address (though some architectures are able to handle unaligned
address correctly)

So some 64bit architectures may not be able to access the dqc_bitmap
correctly.

This avoids such unaligned access by using another wrapper functions for
ext2_*_bit().  The code is taken from fs/ext4/mballoc.c which also need to
handle unaligned bitmap access.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Acked-by: Joel Becker <jlbec@evilplan.org>
Cc: Mark Fasheh <mfasheh@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

ext4_{set,clear}_bit() is defined as __test_and_{set,clear}_bit_le() for
ext4.  Only two ext4_{set,clear}_bit() calls check the return value.  The
rest of calls ignore the return value and they can be replaced with
__{set,clear}_bit_le().

This changes ext4_{set,clear}_bit() from __test_and_{set,clear}_bit_le()
to __{set,clear}_bit_le() and introduces ext4_test_and_{set,clear}_bit()
for the two places where old bit needs to be returned.

This ext4_{set,clear}_bit() change is considered safe, because if someone
uses these macros without noticing the change, new ext4_{set,clear}_bit
don't have return value and causes compiler errors where the return value
is used.

This also removes unused ext4_find_first_zero_bit().

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: "Theodore Ts'o" <tytso@mit.edu>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

del_timer_sync() calls debug_object_assert_init() to assert that a timer
has been initialized before calling lock_timer_base().  lock_timer_base()
would spin forever on a NULL(uninit-ed) base.  The check is added to
del_timer() to prevent silent failure, even though it would not get stuck
in an infinite loop.

Signed-off-by: Christine Chan <cschan@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Add new check (assert_init) to make sure objects are initialized and
tracked by debugobjects.

Signed-off-by: Christine Chan <cschan@codeaurora.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The address limit is already set in flush_old_exec() so this
set_fs(USER_DS) is redundant.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The address limit is already set in flush_old_exec() so this
set_fs(USER_DS) is redundant.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

A straightforward looking use of idr for a device id.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Tejun Heo <tj@kernel.org>
Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Acked-by: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

hwmon was using an idr with a NULL pointer, so convert to an
ida which then allows use of Rusty's ida_simple_get.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Tejun Heo <tj@kernel.org>
Acked-by: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Cc: Evgeniy Polyakov <zbr@ioremap.net>
Cc: Darrick J. Wong <djwong@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

fb_set_suspend() must be called with the console semaphore held, which
means the code path coming in here will first take the console_lock() and
then call lock_fb_info().

However several framebuffer ioctl commands acquire these locks in reverse
order (lock_fb_info() and then console_lock()).  This gives rise to
potential AB-BA deadlock.

Fix this by changing the order of acquisition in the ioctl commands that
make use of console_lock().

Signed-off-by: Andrea Righi <arighi@develer.com>
Reported-by: Peter Nordström (Palm GBU) <peter.nordstrom@palm.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

kbuf is a buffer that is local to this function, so all of the error paths
leaving the function should release it.

Signed-off-by: Julia Lawall <julia@diku.dk>
Cc: Dave Airlie <airlied@redhat.com>
Cc: Jesper Juhl <jj@chaosbits.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Some messing with error codes to return 0 on out id's and match
current situation.  Is this necessary? Looks a touch 'interesting'.

Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Tejun Heo <tj@kernel.org>
Cc: Guenter Roeck <guenter.roeck@ericsson.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Thomas Hellstrom <thellstrom@vmware.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Don't dereference em if it's NULL or an error pointer.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

A call to va_copy() should always be followed by a call to va_end() in the
same function.  In kernel/autit.c::audit_log_vformat() this is not always
done.  This patch makes sure va_end() is always called.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Eric Paris <eparis@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The address limit is already set in flush_old_exec() so this
set_fs(USER_DS) is redundant.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Don't allow everybody to use a modem.

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
Cc: Linus Walleij <linus.walleij@stericsson.com>
Cc: Russell King <linux@arm.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The current interrupt traces from irq_handler_entry and irq_handler_exit
provide when an interrupt is handled.  They provide good data about when
the system has switched to kernel space and how it affects the currently
running processes.

There are some IRQ vectors which trigger the system into kernel space,
which are not handled in generic IRQ handlers.  Tracing such events gives
us the information about IRQ interaction with other system events.

The trace also tells where the system is spending its time.  We want to
know which cores are handling interrupts and how they are affecting other
processes in the system.  Also, the trace provides information about when
the cores are idle and which interrupts are changing that state.

The following patch adds the event definition and trace instrumentation
for interrupt vectors.  For x86, a lookup table is provided to print out
readable IRQ vector names.  The template can be used to provide interrupt
vector lookup tables on other architectures.

Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Michael Rubin <mrubin@google.com>
Cc: David Sharp <dhsharp@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The x86 timer interrupt handler is the only handler not traced in the
irq/irq_handler_{entry|exit} trace events.

Add tracepoints to the interrupt handler to trace it.

Signed-off-by: Vaibhav Nagarnaik <vnagarnaik@google.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Michael Rubin <mrubin@google.com>
Cc: David Sharp <dhsharp@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Replace the bubble sort in sanitize_e820_map() with a call to the generic
kernel sort function to avoid pathological performance with large maps.

On large (thousands of entries) E820 maps, the previous code took minutes
to run; with this change it's now milliseconds.

Signed-off-by: Mike Ditto <mditto@google.com>
Cc: Stefan Assmann <sassmann@kpanic.de>
Cc: Nancy Yuen <yuenn@google.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Cc: Ed Wildgoose <git@wildgooses.com>
Cc: Ed Wildgoose <kernel@wildgooses.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

This new driver replaces the old PCEngines Alix 2/3 LED driver with a new
driver that controls the LEDs through the leds-gpio driver.  The old
driver accessed GPIOs directly, which created a conflict and prevented
also loading the cs5535-gpio driver to read other GPIOs on the Alix board.
 With this new driver, we hook into leds-gpio which in turn uses GPIO to
control the LEDs and therefore it's possible to control both the LEDs and
access onboard GPIOs

Driver is moved to platform/geode and any other geode initialisation
modules should move here also.

This driver is inspired by leds-net5501.c by Alessandro Zummo.

Ideally, leds-net5501.c should also be moved to platform/geode.
Additionally the driver relies on parts of the patch: 7f131cf3ed ("leds:
leds-alix2c - take port address from MSR) by Daniel Mack to perform
detection of the Alix board.

Signed-off-by: Ed Wildgoose <kernel@wildgooses.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Daniel Mack <daniel@caiaq.de>
Reviewed-by: Grant Likely <grant.likely@secretlab.ca>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

On x86_32 casting the unsigned int result of get_random_int() to long may
result in a negative value.  On x86_32 the range of mmap_rnd() therefore
was -255 to 255.  The 32bit mode on x86_64 used 0 to 255 as intended.

The bug was introduced by 675a081 ("x86: unify mmap_{32|64}.c") in January
2008.

Signed-off-by: Ludwig Nussel <ludwig.nussel@suse.de>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

This makes the iris driver use the platform API, so it is properly exposed
in /sys.

[akpm@linux-foundation.org: remove commented-out code, add missing space to printk, clean up code layout]
Signed-off-by: Shérab <Sebastien.Hinderer@ens-lyon.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Add support for Aspire 1410 BIOS v1.3314.  Fixes the following error:

acerhdf: unknown (unsupported) BIOS version Acer/Aspire 1410/v1.3314,
please report, aborting!

Signed-off-by: Clay Carpenter <claycarpenter@gmail.com>
Signed-off-by: Peter Feuerer <peter@piie.net>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Since the commit below which added O_PATH support to the *at() calls, the
error return for readlink/readlinkat for the empty pathname has switched
from ENOENT to EINVAL:

  commit 65cfc6722361570bfe255698d9cd4dccaf47570d
  Author: Al Viro <viro@zeniv.linux.org.uk>
  Date:   Sun Mar 13 15:56:26 2011 -0400

    readlinkat(), fchownat() and fstatat() with empty relative pathnames

This is both unexpected for userspace and makes readlink/readlinkat
inconsistant with all other interfaces; and inconsistant with our stated
return for these pathnames.

As the readlinkat call does not have a flags parameter we cannot use the
AT_EMPTY_PATH approach used in the other calls.  Therefore expose whether
the original path is infact entry via a new user_path_at_empty() path
lookup function.  Use this to determine whether to default to EINVAL or
ENOENT for failures.

BugLink: http://bugs.launchpad.net/bugs/817187
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

The parameter's origin type is long.  On an i386 architecture, it can
easily be larger than 0x80000000, causing this function to convert it to a
sign-extended u64 type.  Change the type to unsigned long so we get the
correct result.

[akpm@linux-foundation.org: build fix]
Signed-off-by: hank <pyu@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: John Stultz <john.stultz@linaro.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Fix kconfig unmet dependency warning.  BACKLIGHT_CLASS_DEVICE depends on
BACKLIGHT_LCD_SUPPORT, so select the latter along with the former.

warning: (DRM_RADEON_KMS && DRM_I915 && STUB_POULSBO && FB_BACKLIGHT && PANEL_SHARP_LS037V7DW01 && PANEL_ACX565AKM && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_ASUS && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT)

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

When no floppy is found the module code can be released while a timer
function is pending or about to be executed.

CPU0                                  CPU1
      floppy_init()
timer_softirq()
   spin_lock_irq(&base->lock);
   detach_timer();
   spin_unlock_irq(&base->lock);
   -> Interrupt
del_timer();
        return -ENODEV;
                                      module_cleanup();
   <- EOI
   call_timer_fn();
   OOPS

Use del_timer_sync() to prevent this.

Signed-off-by: Carsten Emde <C.Emde@osadl.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Merge remote-tracking branch 'kvmtool/master'

Conflicts:
include/net/9p/9p.h

Merge remote-tracking branch 'moduleh/module.h-split'

Conflicts:
arch/arm/mach-bcmring/mm.c
drivers/s390/char/vmur.c
drivers/scsi/libfc/fc_lport.c
include/linux/dmaengine.h

Merge remote-tracking branch 'writeback/next'

Merge remote-tracking branch 'tmem/linux-next'

Merge remote-tracking branch 'staging/staging-next'

Conflicts:
drivers/staging/rtl8192e/r8192E_core.c
drivers/staging/xgifb/XGI_main_26.c

Merge remote-tracking branch 'usb/usb-next'

Merge remote-tracking branch 'tty/tty-next'

Merge remote-tracking branch 'driver-core/driver-core-next'

Conflicts:
arch/arm/plat-mxc/devices.c

Merge remote-tracking branch 'regmap/for-next'

Merge remote-tracking branch 'namespace/master'

Merge remote-tracking branch 'sysctl/master'

Merge remote-tracking branch 'percpu/for-next'

Merge remote-tracking branch 'edac-amd/for-next'

Merge remote-tracking branch 'xen-two/linux-next'

Merge remote-tracking branch 'xen/upstream/xen'

Merge remote-tracking branch 'ptrace/ptrace'

Merge remote-tracking branch 'kvm/linux-next'

Merge remote-tracking branch 'rcu/rcu/next'

Merge remote-tracking branch 'tip/auto-latest'

Merge remote-tracking branch 'devicetree/devicetree/next'

Conflicts:
drivers/of/base.c

Merge remote-tracking branch 'i7300_edac/linux_next'

Conflicts:
arch/x86/kernel/cpu/mcheck/mce.c

Merge remote-tracking branch 'i7core_edac/linux_next'

Merge remote-tracking branch 'fsnotify/for-next'

Merge remote-tracking branch 'apm/for-next'

Merge remote-tracking branch 'pm/linux-next'

Conflicts:
arch/arm/mach-shmobile/board-ap4evb.c

Merge remote-tracking branch 'trivial/for-next'

Conflicts:
Documentation/PCI/pci.txt
drivers/net/Kconfig

Merge remote-tracking branch 'osd/linux-next'

Merge remote-tracking branch 'iommu/next'

Merge remote-tracking branch 'watchdog/master'

Merge remote-tracking branch 'agp/agp-next'

Merge remote-tracking branch 'security/next'

Conflicts:
fs/ocfs2/xattr.c

Merge remote-tracking branch 'voltage/for-next'

Merge remote-tracking branch 'omap_dss2/for-next'

Merge remote-tracking branch 'viafb/viafb-next'

Merge remote-tracking branch 'fbdev/fbdev-next'

Conflicts:
drivers/video/Kconfig

Merge commit 'refs/next/20110915/mfd'

Conflicts:
drivers/rtc/rtc-twl.c

Merge remote-tracking branch 'md/for-next'

Merge remote-tracking branch 'slab/for-next'

Merge remote-tracking branch 'kgdb/kgdb-next'

Merge remote-tracking branch 'mmc/mmc-next'

Merge remote-tracking branch 'leds/for-mm'

Conflicts:
drivers/leds/Kconfig

Merge remote-tracking branch 'battery/master'

Merge branch 'quilt/device-mapper'

Merge remote-tracking branch 'block/for-next'

Merge remote-tracking branch 'input/next'

Merge branch 'quilt/rr'

Merge remote-tracking branch 'cpufreq/next'

Merge remote-tracking branch 'sound-asoc/for-next'

Merge remote-tracking branch 'sound/for-next'

Conflicts:
arch/mips/alchemy/devboards/db1x00/platform.c
sound/mips/Kconfig

Merge remote-tracking branch 'crypto/master'

Merge remote-tracking branch 'l2-mtd/master'

Conflicts:
arch/arm/mach-at91/board-usb-a9260.c

Merge remote-tracking branch 'bluetooth/master'

Merge remote-tracking branch 'wireless/master'

Conflicts:
drivers/net/wireless/iwlwifi/iwl-pci.c
drivers/net/wireless/rt2x00/rt2800usb.c
drivers/net/wireless/wl12xx/main.c

Merge remote-tracking branch 'net/master'

Conflicts:
MAINTAINERS
arch/powerpc/configs/40x/hcu4_defconfig
drivers/net/Kconfig
drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
drivers/net/wireless/iwlwifi/iwl-pci.c
drivers/net/wireless/iwlwifi/iwl-trans-tx-pcie.c
drivers/s390/cio/qdio_main.c

Merge remote-tracking branch 'slave-dma/next'

Merge remote-tracking branch 'scsi/master'

Merge remote-tracking branch 'ibft/master'

Merge remote-tracking branch 'swiotlb/master'

Merge remote-tracking branch 'ieee1394/for-next'

Merge remote-tracking branch 'libata/NEXT'

Merge remote-tracking branch 'kconfig/for-next'

Merge remote-tracking branch 'kbuild/for-next'

Merge remote-tracking branch 'docs/docs-move'

Merge branch 'quilt/kernel-doc'

Merge remote-tracking branch 'hwmon-staging/hwmon-next'

Merge branch 'quilt/jdelvare-hwmon'

Merge remote-tracking branch 'bjdooks-i2c/next-i2c'

Merge branch 'quilt/i2c'

Merge remote-tracking branch 'hid/for-next'

Merge remote-tracking branch 'xfs/master'

Conflicts:
fs/xfs/xfs_aops.c
fs/xfs/xfs_super.c

Merge remote-tracking branch 'v9fs/for-next'

Conflicts:
net/9p/trans_virtio.c

Merge remote-tracking branch 'ocfs2/linux-next'

Merge remote-tracking branch 'nfsd/nfsd-next'