Josh Triplett [Tue, 5 Nov 2013 05:56:57 +0000 (16:56 +1100)]
checkpatch.pl: check for the FSF mailing address
Kernel maintainers reject new instances of the GPL boilerplate paragraph
directing people to write to the FSF for a copy of the GPL, since the FSF
has moved in the past and may do so again.
Make this an error for new code, but just a --strict CHK in --file mode;
anyone interested in doing tree-wide cleanups of this form can enable this
test explicitly.
Signed-off-by: Josh Triplett <josh@joshtriplett.org> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Joe Perches [Tue, 5 Nov 2013 05:56:56 +0000 (16:56 +1100)]
checkpatch: make the memory barrier test noisier
Peter Zijlstra prefers that comments be required near uses of memory
barriers.
Change the message level for memory barrier uses from a --strict test only
to a normal WARN so it's always emitted.
This might produce false positives around insertions of memory barriers
when a comment is outside the patch context block.
And checkpatch is still stupid, it only looks for existence of any
comment, not at the comment content.
Signed-off-by: Joe Perches <joe@perches.com> Suggested-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Peter Zijlstra <peterz@infradead.org> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Oliver Neukum <oliver@neukum.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Joe Perches [Tue, 5 Nov 2013 05:56:55 +0000 (16:56 +1100)]
checkpatch: add test for #defines of ARCH_HAS_<foo>
Add a test for these #defines
Additionally, moved string_find_replace sub as it screws up subsequent
formatting when placed inside another sub.
Signed-off-by: Joe Perches <joe@perches.com> Suggested-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Joe Perches [Tue, 5 Nov 2013 05:56:53 +0000 (16:56 +1100)]
checkpatch: extend CamelCase types and ignore existing CamelCase uses in a patch
Extend the CamelCase words found to include structure members.
In https://lkml.org/lkml/2013/9/3/318 Sarah Sharp (mostly) wrote:
"In general, if checkpatch.pl complains about a variable a patch
introduces that's CamelCase, you should pay attention to it. Otherwise,
[] ignore it."
So, if checking a patch, scan the original patched file if it's available
and add any preexisting CamelCase types so reuses do not generate
CamelCase messages.
That also means Andrew's not so cruelly spurned anymore.
https://lkml.org/lkml/2013/2/22/426
Signed-off-by: Joe Perches <joe@perches.com> Suggested-by: Sarah Sharp <sarah.a.sharp@linux.intel.com> Suggested-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Joe Perches [Tue, 5 Nov 2013 05:56:53 +0000 (16:56 +1100)]
checkpatch: report missing spaces around trigraphs with --strict
Spaces around trigraphs are specified by CodingStyle but checkpatch is
currently silent about them because there are many current instances
without them.
Make missing spaces around trigraphs a --strict message.
Signed-off-by: Joe Perches <joe@perches.com> Reviewed-by: Josh Triplett <josh@joshtriplett.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Marian Chereji [Tue, 5 Nov 2013 05:56:52 +0000 (16:56 +1100)]
lib: Add CRC64 ECMA module
Add implementation of CRC64 ECMA checksum.
We have an IP Acceleration driver for Freescale network processors which
is using this CRC64. However, it still needs some work in order for it to
become upstreamable.
Signed-off-by: Marian Chereji <marian.chereji@freescale.com> Reviewed-by: Varvara Andrei-B21317 <andrei.varvara@freescale.com> Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Nicolin Chen [Tue, 5 Nov 2013 05:56:52 +0000 (16:56 +1100)]
sound/soc/pxa/mmp-pcm.c: use gen_pool_dma_alloc() to allocate dma buffer
Since gen_pool_dma_alloc() is introduced, we implement it to simplify code.
Signed-off-by: Nicolin Chen <b42378@freescale.com> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Liam Girdwood <lgirdwood@gmail.com> Cc: Mark Brown <broonie@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Nicolin Chen [Tue, 5 Nov 2013 05:56:50 +0000 (16:56 +1100)]
drivers/dma/mmp_tdma.c: use gen_pool_dma_alloc() to allocate descriptor
Since gen_pool_dma_alloc() is introduced, we implement it to simplify code.
Signed-off-by: Nicolin Chen <b42378@freescale.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Vinod Koul <vinod.koul@intel.com> Cc: Grant Likely <grant.likely@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Nicolin Chen [Tue, 5 Nov 2013 05:56:49 +0000 (16:56 +1100)]
arch/arm/mach-davinci/sram.c: use gen_pool_dma_alloc() to sram.c
Since gen_pool_dma_alloc() is introduced, we implement it to simplify code.
Signed-off-by: Nicolin Chen <b42378@freescale.com> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Russell King <linux@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Johan Hovold [Tue, 5 Nov 2013 05:56:43 +0000 (16:56 +1100)]
backlight: atmel-pwm-bl: clean up probe error handling
Clean up probe error handling by checking parameters before any
allocations and removing an obsolete error label. Also remove unnecessary
reset of private gpio number.
Signed-off-by: Johan Hovold <jhovold@gmail.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Johan Hovold [Tue, 5 Nov 2013 05:56:42 +0000 (16:56 +1100)]
backlight: atmel-pwm-bl: fix gpio polarity in remove
Make sure to honour gpio polarity also at remove so that the backlight is
actually disabled on boards with active-low enable pin.
Signed-off-by: Johan Hovold <jhovold@gmail.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Johan Hovold [Tue, 5 Nov 2013 05:56:41 +0000 (16:56 +1100)]
backlight: atmel-pwm-bl: fix reported brightness
The driver supports 16-bit brightness values, but the value returned
from get_brightness was truncated to eight bits.
Signed-off-by: Johan Hovold <jhovold@gmail.com> Cc: Jingoo Han <jg1.han@samsung.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jingoo Han [Tue, 5 Nov 2013 05:56:21 +0000 (16:56 +1100)]
backlight: use dev_get_platdata()
Use the wrapper function for retrieving the platform data instead of
accessing dev->platform_data directly. This is a cosmetic change
to make the code simpler and enhance the readability.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jingoo Han [Tue, 5 Nov 2013 05:56:19 +0000 (16:56 +1100)]
backlight: lm3639: Don't mix different enum types
Don't mix different enum types to fix the sparse warnings.
drivers/video/backlight/lm3639_bl.c:80:51: warning: mixing different enum types
drivers/video/backlight/lm3639_bl.c:80:51: int enum lm3639_fleds versus
drivers/video/backlight/lm3639_bl.c:80:51: int enum lm3639_bleds
drivers/video/backlight/lm3639_bl.c:82:51: warning: mixing different enum types
drivers/video/backlight/lm3639_bl.c:82:51: int enum lm3639_fleds versus
drivers/video/backlight/lm3639_bl.c:82:51: int enum lm3639_bleds
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Dan Carpenter [Tue, 5 Nov 2013 05:56:18 +0000 (16:56 +1100)]
drivers/video/backlight/lm3630a_bl.c: potential NULL deref in probe()
We dereference "pdata" later in the function so we can't leave it as NULL.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Dan Carpenter [Tue, 5 Nov 2013 05:56:17 +0000 (16:56 +1100)]
drivers/video/backlight/lm3630a_bl.c: fix signedness bug in lm3630a_chip_init()
"rval" needs to be signed for the error handling to work.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Daniel Jeong [Tue, 5 Nov 2013 05:56:17 +0000 (16:56 +1100)]
backlight: lm3630: apply chip revision
The LM3630 chip was revised by TI and chip name was also changed to
LM3630A. And register map, default values and initial sequences are
changed. The files, lm3630_bl.{c,h} are replaced by lm3630a_bl.{c,h} You
can find more information about LM3630A(datasheet, evm etc) at
http://www.ti.com/product/lm3630a
Signed-off-by: Daniel Jeong <gshark.jeong@gmail.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Milo Kim [Tue, 5 Nov 2013 05:56:16 +0000 (16:56 +1100)]
backlight: lp855x_bl: support new LP8555 device
LP8555 is one of the LP855x family devices.
This device needs pre_init_device() and post_init_device() driver
structure. It's same as LP8557, so the device configuration code is
shared with LP8557. Backlight outputs are generated from dual DC-DC boost
converters. It's configurable EPROM settings which are defined in the
platform data.
Driver documentation and device tree bindings are updated.
Signed-off-by: Milo Kim <milo.kim@ti.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jingoo Han [Tue, 5 Nov 2013 05:56:15 +0000 (16:56 +1100)]
MAINTAINERS: remove Richard Purdie as backlight maintainer
Remove Richard Purdie as backlight subsystem maintainer,
akpm: Richard is still responsive and is reviewing some of the patches,
but appears to agree that listing him as the maintainer is no longer
appropriate.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Dave Young [Tue, 5 Nov 2013 05:56:14 +0000 (16:56 +1100)]
kernel/printk/printk.c: boot_delay return value fix
Kernel report "Malformed early option boot_delay" because it returns
non-zero value. Move to 'return 0' now because there's no reason it
should return 1.
Signed-off-by: Dave Young <dyoung@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Ryan Mallon [Tue, 5 Nov 2013 05:56:13 +0000 (16:56 +1100)]
vsprintf: check real user/group id for %pK
Some setuid binaries will allow reading of files which have read
permission by the real user id. This is problematic with files which use
%pK because the file access permission is checked at open() time, but the
kptr_restrict setting is checked at read() time. If a setuid binary opens
a %pK file as an unprivileged user, and then elevates permissions before
reading the file, then kernel pointer values may be leaked.
This happens for example with the setuid pppd application on Ubuntu 12.04:
This will only leak the pointer value from the first line, but other
setuid binaries may leak more information.
Fix this by adding a check that in addition to the current process having
CAP_SYSLOG, that effective user and group ids are equal to the real ids.
If a setuid binary reads the contents of a file which uses %pK then the
pointer values will be printed as NULL if the real user is unprivileged.
Update the sysctl documentation to reflect the changes, and also correct
the documentation to state the kptr_restrict=0 is the default.
This is a only temporary solution to the issue. The correct solution is
to do the permission check at open() time on files, and to replace %pK
with a function which checks the open() time permission. %pK uses in
printk should be removed since no sane permission check can be done, and
instead protected by using dmesg_restrict.
Signed-off-by: Ryan Mallon <rmallon@gmail.com> Cc: Kees Cook <keescook@chromium.org> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Joe Perches <joe@perches.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Kees Cook [Tue, 5 Nov 2013 05:56:12 +0000 (16:56 +1100)]
printk: report console names during cut-over
This reports the names of consoles as they're being disabled to help
identify which is which during cut-over. Helps answer the question "which
boot console actually got activated?" once the regular console is running,
mostly when debugging boot console failures.
Gustavo Padovan [Tue, 5 Nov 2013 05:56:11 +0000 (16:56 +1100)]
drivers/misc/ti-st/st_core.c: fix NULL dereference on protocol type check
If the type we receive is greater than ST_MAX_CHANNELS we can't rely on
type as vector index since we would be accessing unknown memory when we use the type
as index.
Josh Triplett [Tue, 5 Nov 2013 05:56:10 +0000 (16:56 +1100)]
lglock: map to spinlock when !CONFIG_SMP
When the system has only one CPU, lglock is effectively a spinlock; map it
directly to spinlock to eliminate the indirection and duplicate code.
In addition to removing overhead, this drops 1.6k of code with a defconfig
modified to have !CONFIG_SMP, and 1.1k with a minimal config.
Signed-off-by: Josh Triplett <josh@joshtriplett.org> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Michal Marek <mmarek@suse.cz> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: David Howells <dhowells@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Nick Piggin <npiggin@kernel.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Vineet Gupta [Tue, 5 Nov 2013 05:56:09 +0000 (16:56 +1100)]
sched: remove ARCH specific fpu_counter from task_struct
fpu_counter in task_struct was used only by sh/x86. Both of these now
carry it in ARCH specific thread_struct, hence this can now be removed
from generic task_struct, shrinking it slightly for other arches.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Paul Mundt <paul.mundt@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Vineet Gupta [Tue, 5 Nov 2013 05:56:09 +0000 (16:56 +1100)]
x86: move fpu_counter into ARCH specific thread_struct
Only a couple of arches (sh/x86) use fpu_counter in task_struct so it can
be moved out into ARCH specific thread_struct, reducing the size of
task_struct for other arches.
Compile tested i386_defconfig + gcc 4.7.3
Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Ingo Molnar <mingo@kernel.org> Cc: Paul Mundt <paul.mundt@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Vineet Gupta [Tue, 5 Nov 2013 05:56:08 +0000 (16:56 +1100)]
sh: move fpu_counter into ARCH specific thread_struct
Only a couple of arches (sh/x86) use fpu_counter in task_struct so it can
be moved out into ARCH specific thread_struct, reducing the size of
task_struct for other arches.
Compile tested sh defconfig + sh4-linux-gcc (4.6.3)
Signed-off-by: Vineet Gupta <vgupta@synopsys.com> Cc: Paul Mundt <paul.mundt@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
15d94b82565ebfb0 ("reboot: move shutdown/reboot related functions to
kernel/reboot.c") moved all kexec-related functionality to
kernel/reboot.c, so kernel/sys.c no longer needs to include
<linux/kexec.h>.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Robin Holt <holt@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Chen Gang [Tue, 5 Nov 2013 05:56:07 +0000 (16:56 +1100)]
kernel/delayacct.c: remove redundant checking in __delayacct_add_tsk()
The wrapper function delayacct_add_tsk() already checked 'tsk->delays',
and __delayacct_add_tsk() has no another direct callers, so can remove the
redundancy checking code.
And the label 'done' is also useless, so remove it, too.
Signed-off-by: Chen Gang <gang.chen@asianux.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
gen_init_cpio: avoid NULL pointer dereference and rework env expanding
getenv() may return NULL if given environment variable does not exist
which leads to NULL dereference when calling strncat.
Besides that, the environment variable name was copied to a temporary
env_var buffer, but this copying can be avoided by simply using the input
string.
Lastly, the whole loop can be greatly simplified by using the snprintf
function instead of the playing with strncat.
By the way, the current implementation allows a recursive variable
expansion, as in:
$ echo 'out ${A} out ' | A='a ${B} a' B=b /tmp/a
out a b a out
I'm assuming this is just a side effect and not a conscious decision
(especially as this may lead to infinite loop), but I didn't want to
change this behaviour without consulting.
If the current behaviour is deamed incorrect, I'll be happy to send
a patch without recursive processing.
Signed-off-by: Michal Nazarewicz <mina86@mina86.com> Cc: Kees Cook <keescook@chromium.org> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Jesper Juhl <jj@codesealer.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
The name_to_dev_t function has a comment block which lists the supported
syntaxes for the device name. Add a bullet for the <major>:<minor>
syntax, which is already supported in the code
Signed-off-by: Sebastian Capella <sebastian.capella@linaro.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Prarit Bhargava [Tue, 5 Nov 2013 05:56:02 +0000 (16:56 +1100)]
drivers/char/hpet.c: allow user controlled mmap for user processes
The CONFIG_HPET_MMAP Kconfig option exposes the memory map of the HPET
registers to userspace. The Kconfig help points out that in some cases
this can be a security risk as some systems may erroneously configure the
map such that additional data is exposed to userspace.
This is a problem for distributions -- some users want the MMAP
functionality but it comes with a significant security risk. In an effort
to mitigate this risk, and due to the low number of users of the MMAP
functionality, I've introduced a kernel parameter, hpet_mmap_enable, that
is required in order to actually have the HPET MMAP exposed.
Signed-off-by: Prarit Bhargava <prarit@redhat.com> Acked-by: Matt Wilson <msw@amazon.com> Signed-off-by: Clemens Ladisch <clemens@ladisch.de> Cc: Randy Dunlap <rdunlap@infradead.org> Cc: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
projects / karo-tx-linux.git / log