staging: rtl8192u: r8192U_core: fix switch and case indent code style error

Some switch and case were not be at the same indent level.

Signed-off-by: Raphaël Beamonte <raphael.beamonte@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: most: Use NULL instead of zero

This patch fixes the warning generated by sparse
"Using plain integer as NULL pointer" by using NULL
instead of zero.

Signed-off-by: Ronit halder <ronit.crj@gmail.com>
Acked-by: Christian Gromm <christian.gromm@microchip.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: NULL comparison style

checkpatch complains when a variable comparison to NULL is written as:
variable == NULL or variable != NULL.

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: fix Makefile

The Makefile is including "drivers/media/video". But there is no such
directory in kernel tree. Since it is aim-v4l2 this might have been
"drivers/media/v4l2-core", but the Kconfig already mentions that it
depends on VIDEO_V4L2. So no need to mention that again in the Makefile.

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: remove unused variable

The variable conf was only assigned the value but was never used.

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: use NULL pointer

sparse was complaining that an integer is used as NULL pointer. Fix it
by using NULL.

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: make functions static

split_arg_list() and audio_set_pcm_format() are being called from the
same file and is not referenced from outside, so make them as static.

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: remove unused functions

These functions were only defined but not used anywhere.

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: out of memory error

If kzalloc fails it will print lots of debugging information in the log,
no need to have another in the code.

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: remove multiple blank line

Multiple blank lines are not recommended in the kernel coding style.

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: bool comparison style

Mentioning true or false in the if comparison is error prone and also
not according to the coding style.

Signed-off-by: Sudip Mukherjee <sudip@vectorindia.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rtl8723au: Use %pM format specifier to print mac address

printk() supports %pM format specifier for printing 6-byte MAC/FDDI
addresses in hex notation small buffers, let's use it intead of %x:%x...

Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com>
Acked-by: Jes Sorensen <Jes.Sorensen@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging/rtl8188eu: Use %pM format specifier to print mac address

printk() supports %pM format specifier for printing 6-byte MAC/FDDI
addresses in hex notation small buffers, let's use it intead of %x:%x...

Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: simplify 'memset' of 2D array

This patch simplifies the 'memset' done on a static 2D array.

Signed-off-by: Hari Prasath Gujulan Elango <hgujulan@visteon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: change address to fixed value

The linux_wlan_init_test_config() is called once when net driver is loaded.
And because the pointer type of the pstrWFIDrv is changed with the interger
type, this patch replaces it with designated value instead of pointer.

Signed-off-by: Johnny Kim <johnny.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: add an argument for Handle_SetWfiDrvHandler

Similar to functions of same layer, this patch add an argument for
Handle_SetWfiDrvHandler function. As a result, the redundant typecasting is
removed.

Signed-off-by: Johnny Kim <johnny.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: use the real data type

This patch changes the type of gu8FlushedJoinReqDrvHandler with his real
data type becasue typecasting is not necessary. In result, typecasting
which is not necessary and some building warnings is removed.

Signed-off-by: Johnny Kim <johnny.kim@atmel.com>
Signed-off-by: Tony Cho <tony.cho@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename WILC_MsgQueueDestroy to wilc_mq_destroy

This patch replaces WILC_MsgQueueDestroy to wilc_mq_destroy to
shorten function name and avoid CamelCase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename WILC_MsgQueueRecv to wilc_mq_recv

This patch replaces WILC_MsgQueueRecv with wilc_mq_recv
to shorten function name and avoid CamelCase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename WILC_MsgQueueSend to wilc_mq_send

This patch replaces WILC_MsgQueueSend with wilc_mq_send to
shorten function name and avoid CamelCase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: rename WILC_MsgQueueCreate to wilc_mq_create

This patch replaces WILC_MsgQueueCreate with wilc_mq_create to
shorten function name and avoid CamelCase.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: replace WILC_ErrNo by int type

This patch replaces WILC_ErrNo with int type.
WILC_ErrNo typedef is also removed.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: wilc_msgqueue.c: fix bool comparison style

This patch changes bool comparison style found by checkpatch.pl
CHECK: Using comparison to true is error prone

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: wilc_msgqueue.c: remove kfree NULL check

This patch removes kfree NULL check.
WARNING: kfree(NULL) is safe and this check is probably not required.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: wilc_msgqueue.c: use ! operator instead of NULL comparison

This patch uses ! operator instead of NULL comparison.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: wilc_msgqueue.c: remove unnecessary parentheses

This patch remove unnecessary parentheses found by checkpatch.pl
CHECK: Unnecessary parentheses around pHandle->hSem

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: wilc_msgqueue.c: remove blank line before a close brace

This patch removes blank line before a close brace "}"
CHECK: Blank lines aren't necessary before a close brace '}'

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: wilc_msgqueue.c: remove multiple blank lines

This patch removes multiple blank lines.
CHECK: Please don't use multiple blank lines

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: wilc_msgqueue.c: remove blank line after open brace

This patch removes a blank line for open brace "{"
CHECK: Blank lines aren't necessary after an open brace '{'

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: wilc_msgqueue.c: remove braces for single statement

This patch removes braces for single statement blocks.
WARNING: braces {} are not necessary for single statement blocks

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: add a blank line after declaration

This patch adds a blank line after declaration found by checkpatch.pl
WARNING: Missing a blank line after declarations.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: replace MALLOC_WILC_BUFFER() macro to avoid possible memory leak

The MALLOC_WILC_BUFFER() macro was using a return statement, and didn't
take care of possible memory leaks and subsequent bugs when it was failing
after succeeding some allocations. This patch corrects this behavior.

Signed-off-by: Raphaël Beamonte <raphael.beamonte@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: remove FREE_WILC_BUFFER()

It was just a wrapper around kfree(), so call that instead.

Signed-off-by: Raphaël Beamonte <raphael.beamonte@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: fix coding style checks in sw_sync.c

replace comparison "obj" to NULL with "!obj"

Signed-off-by: Trung Thanh Le <trungthanh1608@yahoo.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: ashmem.c: 'Alignment' style issue

fix two CHECK issues by checkpatch.pl with --strict:
Alignment should match open parenthesis

Signed-off-by: Peng Sun <sironhide0null@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: ashmem.c: 'No space necessary after' style issue

fix two CHECK issues by checkpatch.pl with --strict:
No space is necessary after a cast

Signed-off-by: Peng Sun <sironhide0null@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: ashmem.c: 'spaces preferred around that -' style issue

fix a CHECK style issue by checkpatch.pl with --strict:
spaces preferred around that '-'

Signed-off-by: Peng Sun <sironhide0null@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: replace typedef struct tagSRxDesc

with struct vnt_rx_desc and all members the same.

volatile is removed from pointers as this generates warning
message.

Only the first four members of vnt_rx_desc need to be volatile.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: replace typedef struct tagDEVICE_RD_INFO

with struct vnt_rd_info

volatile is removed because it will generate a warning
(in any case this member is not) and renaming rd_info.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: replace typedef struct tagRDES1

with struct vnt_rdes1 and members
wReqCount -> req_count
wReserved -> reserved

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: vt6655: replace typedef struct tagRDES0

with struct vnt_rdes0 replacing members as follows
wResCount -> res_count
f15Reserved -> f15_reserved
f1Owner -> owner

big endian
f8Reserved1 -> f8_reserved1
f7Reserved -> f7_reserved

Narrowing endian differences to inside structure.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbduxfast: remove unnecessary clearing of private data

The clearing of the private data members in the (*detatch) is not
necessary. The comedi core is going to kfree the private data as soon
as the (*detach) finishes.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbduxfast: absorb usbduxfast_attach_common()

This function is only called by the (*auto_attach) to do the final
setup of the analog input subdevice.

For aesthetics absorb it into usbduxfast_auto_attach() and reorder
the initialization of the subdevice to better follow the "norm" in
comedi drivers.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbduxfast: remove unnecessary semaphore down/up

The semaphore down/up in usbduxfast_attach_common() is not necessary.
This function is only called as part of the (*auto_attach) and does
not talk to the USB device.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbduxfast: document strange ai maxdata

The subdevice 'maxdata' is typically a mask of the valid bits that can
be returned by a subdevice, (1 << bits) - 1. The analog inputs of this
device have a resolution of 12-bits so the 'maxdata' should be 0x0fff.
But, this hardware can produce a value of 0x1000 indicating an overflow
from the ADC. The comedilib library's comedi_to_phys() function will
then return NAN when this value is read from the hardware.

Add a comment to clarify the strage 'maxdata' value.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbduxfast: use a common exit path in ai (*do_cmd)

For aesthetics, use 'goto' and a common exit point in this function so
that the up of the semaphore is not overlooked.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbduxfast: tidy up the conversion timing validation

Cleanup the validation of the cmd->convert_arg to use the same calculation
in the (*do_cmdtest) and the (*do_cmd).

Remove the, then unnecessary, redundant check in the (*do_cmd).

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbduxfast: TRIG_EXT is only valid for cmd->start_src

According to the code, and verified with the author Bernd Porr, the
TRIG_EXT trigger is only valid for the cmd->start_src. Remove this
trigger from the cmd->scan_begin_src and cmd->convert_src.

The only valid scan_begin_src is then TRIG_FOLLOW  and the convert_src
is only TRIG_TIMER. Remove the redundant unique trigger checks in Step
2b of the (*do_cmdtest) as well as any other unnecessary checks of
those trigger sources.

Also remove the incorrect comment for a cmd->stop_src of TRIG_EXT.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbduxfast: TRIG_EXT only works for 1 or 16 channels

Move this check from the (*do_cmd) to the (*do_cmdtest).

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbduxfast: fix multi-line comment

This comment does not need to be multi-line. Fix it to remove the
checkpatch warning.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbduxfast: use preferred kernel types

As suggested by checkpatch.pl:

CHECK: Prefer kernel type 'u8' over 'uint8_t'
CHECK: Prefer kernel type 's8' over 'int8_t'

For consistency, also change the uint16_t and int16_t types to
u16 and s16.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbduxfast: remove impossible 'if (!devpriv)' checks

The private data 'devpriv' is allocated in the (*auto_attach) before
the subdevices are initialized and the (*auto_attach) has to complete
successfully before the core will call any of the subdevice operations.
Because of this the (!devpriv) checks in the subdevice code can never
fail. Remove them.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbduxfast: only chanlist of 1, 2, 3, or 16 are supported

The analog input (*do_cmd) only supports channel lists of 1, 2, 3, or 16
channels. Add a check for this to usbduxfast_ai_check_chanlist() and remove
the check from usbduxfast_ai_cmd().

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbduxfast: chanlist check is Step 5 of (*do_cmdtest)

The channel list should be checked in Step 5 of the (*do_cmdtest) not
as part of the (*do_cmd). Factor the check out of usbduxfast_ai_cmd().

Tidy up the factored out code. The channel number 'i' will never be
greater than NUMCHANNELS due to the subdevice setup and the checks
done in the code. The up/down of the semaphore is also not needed
because the (*do_cmdtest) never actually tries to access the hardware.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s526: fix the block comments

Tidy up the block comments to fix the checkpatch.pl warnings.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s526: remove #if 0'ed out code block

This #if 0'ed out code is not necessary. It's actually just a copy
of the psuedo code in the S526 Hardware Manual that shows an example
of a counter application. Remove it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s526: remove unnecessary defines

Remove a couple unused defines,

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s526: remove s526_ai_insn_config()

This (*insn_config) does not follow the comedi core API. It also
would not work as expected.

It appears to be trying to configure the analog input subdevice so
that the (*insn_read) would read multiple channels (data[0]) and
optionally enable the 15us delay (data[1]) needed for the multiplexor
to change channels between samples.

Unfortunately, the comedi core expects (*insn_read) operations to
return 1 or more samples for a single channel, which is what the
(*insn_read) in this driver does.

The (*insn_config) is also enabling the analog input end-of-conversion
interrupt. This isn't needed, and might be a problem since the driver
does not currently request and interrupt. The enable bit does not
need to be set for the end-of-conversion to occur in the interrupt
status register.

Remove the (*insn_config) and modify the (*insn_read) to automatically
handle the 15us delay when needed.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s526: tidy up s526_ai_rinsn()

Rename this function to follow the normal naming in comedi drivers.

Use the comedi_offset_munge() helper to munge the hardware two's
complement data to the comedi offset binary format.

Change the final return to insn->n to clarify the return value without
the need for the comment.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s526: wait for analog output conversions to complete

It's possible for the user to write more than one value to an analog
output channel with the (*insn_write) operation. Use comedi_timeout()
to check the interrupt status register to ensure that each data
conversion is complete before writing the next value.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s526: tidy up subdevice init

For aesthetics, add some whitespace to the subdevice initialization.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s526: define the eeprom data and control registers

Define these registers and their bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s526: define the miscellaneous register and bits

Define this register and its bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s526: define the digtial I/O control register and bits

Define this register and its bits and remove the magic numbers.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s526: define the interrupt enable/status registers

These registers use the same bit defines. Define both of them and
the bits.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s526: add defines for the ao/ai data register

The same register is used for analog output and input data. Add defines
for both for added clarity.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s526: define the ADC (analog input) control register and bits

Define this register and its bits and remove the magic numbers.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s526: define the DAC (analog output) control register and bits

Define this register and its bits and remove the magic numbers.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s526: define the watchdog timer control register and bits

Define this register and it's bits so that we can possibly support
it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s526: define the timer control register and bits

Define this register and it's bits so that we can possibly support
it.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s526: refactor gpct registers

The S526 board has 4 general purpose counter/timers. The current
defines used for the registers of these devices do not provide much
clarity in what they are.

Refactor the code to add some clarity.

Replace the current register defines with macros that return the
correct offset based on the counter 'channel'. Introduce a some helper
functions to handle reading/writing the LSB/MSB registers so that
they are always accessed in the correct oreder.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: s526: tidy up multi-line comments

Format the multi-line comments in the kernel CodingStyle.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: serial2002: use proper errno

checkpatch.pl reports:
WARNING: ENOSYS means 'invalid syscall nr' and nothing else

Change the error code to -ENOTTY.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: serial2002: usleep_range is preferred over udelay

Fix checkpatch issue: "CHECK: usleep_range is preferred over udelay;
see Documentation/timers/timers-howto.txt". Replace the udelay() with
usleep_range() with a reasonable upper limit.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: serial2002: tidy up multi-line comments

Format the multi-line comments in the kernel CodingStyle.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: unioxx5: remove this flawed driver

I was going to clean up this driver but looking it over it has a
number of serious flaws. Also, Fastwell published an End-Of-Life
notification for the board on 24/Jan/2014 (End-of-sale 30/Jun/2014,
End-of-delivery 30/Dec/2014).

Since the driver has a comedi driver status of "unkown", lets just
remove the driver instead of trying to fix the flaws.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ssv_dnp: tidy up multi-line comments

Format the multi-line comments in the kernel CodingStyle.

Move the comment about the I/O ports in dnp_attach() to the start
of the function. This is typically where the resources are reserved.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: use comedi_offset_munge()

Use the comedi_offset_munge() helper to convert the hardware two's
complement values to the offset binary format expected by comedi.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: remove impossible 'if (!devpriv)' check

The comedi core can only call this subdevice function is the private
data was successfully allocated during the (*auto_attach). Remove
the unnecessary check.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: rename dev->private local variables

For aesthetics, consistently use the same name. 'devpriv', for the
local variable used to reference the private data, 'dev->private'.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: use common code path to check the cmd->scan_begin_arg

There are currently separate code paths to check the scan_begin_arg based
of the USB speed. Refactor the code to use a common code path and simplify
the code.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: add missing spaces

Add some missing space to quiet the checkpatch.pl issues about:

CHECK: spaces preferred around that '/' (ctx:VxV)
CHECK: spaces preferred around that '*' (ctx:VxV)
CHECK: spaces preferred around that '+' (ctx:VxV)

For aesthetics, use tabs instead of spaces in all the defines and

ensure they have common alignment.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbdux: use preferred kernel types

As suggested by checkpatch.pl:

CHECK: Prefer kernel type 'u8' over 'uint8_t'
CHECK: Prefer kernel type 'u16' over 'uint16_t'

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: vmk80xx: tidy up defines

For aesthetics, use tabs instead of spaces for the whitespace.

Convert the bit defines to use the preferred BIT macro.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: vmk80xx: cleanup multi-line comment

Reformat the multi-line comment in the kernel CodingStyle.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbduxsigma: use comedi_offset_munge()

Use the comedi_offset_munge() helper to convert the hardware two's
complement values to the offset binary format expected by comedi.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbduxsigma: tidy up block comments

Merge the two comments and format it in the kernel CodingStyle.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbduxsigma: use prefered kernel types

As suggested by checkpatch.pl:

CHECK: Prefer kernel type 'u8' over 'uint8_t'
CHECK: Prefer kernel type 'u32' over 'uint32_t'

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: usbduxsigma: add missing spaces

Add some missing space to quiet the checkpatch.pl issues about:

CHECK: spaces preferred around that '/' (ctx:VxV)
CHECK: spaces preferred around that '+' (ctx:VxV)
CHECK: spaces preferred around that '*' (ctx:VxV)
CHECK: spaces preferred around that '-' (ctx:VxV)

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: put constant on the right of binary operator

Move constants to the right of binary operators.

A simplified version of the semantic patch that makes this change is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
constant c;
expression e;
binary operator b = {==,!=,&,|};
@@

(
- c
+ e
b
- e
+ c
|
- c < e
+ e > c
)
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: osc: put constant on the right of binary operator

Move constants to the right of binary operators.

A simplified version of the semantic patch that makes this change is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
constant c;
expression e;
binary operator b = {==,!=,&,|};
@@

(
- c
+ e
b
- e
+ c
|
- c < e
+ e > c
)
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: obd: put constant on the right of binary operator

Move constants to the right of binary operators.

A simplified version of the semantic patch that makes this change is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
constant c;
expression e;
binary operator b = {==,!=,&,|};
@@

(
- c
+ e
b
- e
+ c
|
- c < e
+ e > c
)
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: llite: put constant on the right of binary operator

Move constants to the right of binary operators.

A simplified version of the semantic patch that makes this change is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
constant c;
expression e;
binary operator b = {==,!=,&,|};
@@

(
- c
+ e
b
- e
+ c
|
- c < e
+ e > c
)
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: libcfs: put constant on the right of binary operator

Move constants to the right of binary operators.

A simplified version of the semantic patch that makes this change is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
constant c;
expression e;
binary operator b = {==,!=,&,|};
@@

(
- c
+ e
b
- e
+ c
|
- c < e
+ e > c
)
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: ldlm: put constant on the right of binary operator

Move constants to the right of binary operators.

A simplified version of the semantic patch that makes this change is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
constant c;
expression e;
binary operator b = {==,!=,&,|};
@@

(
- c
+ e
b
- e
+ c
|
- c < e
+ e > c
)
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: lib-ptl.c: put constant on the right of binary operator

Move constants to the right of binary operators.

A simplified version of the semantic patch that makes this change is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
constant c;
expression e;
binary operator b = {==,!=,&,|};
@@

(
- c
+ e
b
- e
+ c
|
- c < e
+ e > c
)
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: include: put constant on the right of binary operator

Move constants to the right of binary operators.

A simplified version of the semantic patch that makes this change is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
constant c;
expression e;
binary operator b = {==,!=,&,|};
@@

(
- c
+ e
b
- e
+ c
|
- c < e
+ e > c
)
// </smpl>

Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: fix OPEN_BRACE checkpatch.pl errors

Fix occurencies of the following checkpatch.pl error:
ERROR: open brace '{' following function declarations go on
the next line

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: fix GLOBAL_INITIALISERS checkpatch.pl errors

Fix occurencies of the following checkpatch.pl error:
ERROR: do not initialise globals to 0 or NULL

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: fix CODE_INDENT checkpatch.pl errors

Fix occurencies of the following checkpatch.pl error:
ERROR: code indent should use tabs where possible

Signed-off-by: Mike Rapoport <mike.rapoport@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>