K. Y. Srinivasan [Fri, 29 Apr 2011 20:45:15 +0000 (13:45 -0700)]
Staging: hv: VMBUS is a acpi enumerated device; get irq value from bios
On some Windows hosts, the Linux PCI sub-system is not
allocating irq resources to the
vmbus driver. It looks like VMBUS is an ACPI enumerated device.
Retrieve the irq information from DSDT.
Currently we use this bios specified irq, if the PCI
sub-system fails to allocate the irq.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Abhishek Kane <v-abkane@microsoft.com> Signed-off-by: Hank Janssen <hjanssen@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Fri, 29 Apr 2011 20:45:04 +0000 (13:45 -0700)]
Staging: hv: Properly handle errors in hv_pci_probe()
Much of the vmbus driver initialization is done within the hv_pci_probe()
function. Properly handle errors in hv_pci_probe so that we can
appropriately deal with loading of the vmbus driver.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Abhishek Kane <v-abkane@microsoft.com> Signed-off-by: Hank Janssen <hjanssen@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Fri, 29 Apr 2011 20:45:00 +0000 (13:45 -0700)]
Staging: hv: Get rid of vmbus_release_unattached_channels() as it is not used
Since vmbus_release_unattached_channels() is only used in module
unload path and since the vmbus driver cannot be unloaded,
get rid of this "dead" code.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Abhishek Kane <v-abkane@microsoft.com> Signed-off-by: Hank Janssen <hjanssen@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
K. Y. Srinivasan [Fri, 29 Apr 2011 20:44:59 +0000 (13:44 -0700)]
Staging: hv: vmbus_driver cannot be unloaded; cleanup accordingly
The vmbus driver cannot be unloaded; the windows host does not
permit this: A) All guest resources given to the host cannot
be recovered and B) Windows host does not permit reloading the
vmbus_driver without re-booting the guest. Both these issues
are host related. Acknowledge this reality and cleanup the
vmbus driver accordingly. Note that, ideally we will want to handle
the root device through the Hyper-V block driver. In this case
unloading the vmbus driver will not be possible because of the
dependency issues.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Abhishek Kane <v-abkane@microsoft.com> Signed-off-by: Hank Janssen <hjanssen@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Tue, 3 May 2011 09:35:58 +0000 (11:35 +0200)]
staging: brcm80211: replaced WL_TRACE by BCMMSG
Code cleanup. Make code more readable by converting different macro's
(WL_TRACE, WL_AMPDU, etc) into one BCMMSG. This single macro uses wiphy_err()
instead of printk(), so the user is able to correlate a log
message to our driver. This patch only replaces WL_TRACE, subsequent patches
will replace WL_AMPDU etc.
Cc: devel@linuxdriverproject.org Cc: linux-wireless@vger.kernel.org Cc: Brett Rudley <brudley@broadcom.com> Cc: Henry Ptasinski <henryp@broadcom.com> Cc: Roland Vossen <rvossen@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
With the removal of hndcrc16 and hndcrc32 this macro is not needed
anymore. Also the crc-ccitt library functions provide an equivalent
static inline function for this operation.
Cc: devel@linuxdriverproject.org Cc: linux-wireless@vger.kernel.org Cc: Brett Rudley <brudley@broadcom.com> Cc: Henry Ptasinski <henryp@broadcom.com> Cc: Roland Vossen <rvossen@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
staging: brcm80211: replace hndcrc16 with crc-ccitt function
The implementation of hndcrc16 is identical to that of the crc-ccitt
function available in linux kernel library functions. The driver now
uses the crc-ccitt function.
Cc: devel@linuxdriverproject.org Cc: linux-wireless@vger.kernel.org Cc: Brett Rudley <brudley@broadcom.com> Cc: Henry Ptasinski <henryp@broadcom.com> Cc: Roland Vossen <rvossen@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
staging: brcm80211: use local variable for socitype during ai_scan
The SOC interface type is only needed to verify that we are accessing
a chip with AMBA AXI interconnect during ai_scan function. Therefor
this can be done with a local variable.
Cc: devel@linuxdriverproject.org Cc: linux-wireless@vger.kernel.org Cc: Brett Rudley <brudley@broadcom.com> Cc: Henry Ptasinski <henryp@broadcom.com> Cc: Roland Vossen <rvossen@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
staging: brcm80211: fix checkpatch issues in si_pmu_measure_alpclk
Patch "remove dependency between aiutils and siutils sources" introduced
several checkpatch warnings. This patch removes those in the function
si_pmu_measure_alpclk().
Cc: devel@linuxdriverproject.org Cc: linux-wireless@vger.kernel.org Cc: Brett Rudley <brudley@broadcom.com> Cc: Henry Ptasinski <henryp@broadcom.com> Cc: Roland Vossen <rvossen@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
staging: brcm80211: fix checkpatch warnings in si_pmu_spuravoid_pllupdate
patch "remove dependency between aiutils and siutils sources" resulted
in several checkpatch warnings and errors. This patch fixes those in
function si_pmu_spuravoid_pllupdate().
Cc: devel@linuxdriverproject.org Cc: linux-wireless@vger.kernel.org Cc: Brett Rudley <brudley@broadcom.com> Cc: Henry Ptasinski <henryp@broadcom.com> Cc: Roland Vossen <rvossen@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
staging: brcm80211: separate hndpmu functionality for brcmsmac driver
The hndpmu source file has functions for brcmfmac and brcmsmac driver
but it turns out that on function level there is no reuse so for
the brcmsmac its set of functions now reside in wlc_pmu.c.
Cc: devel@linuxdriverproject.org Cc: linux-wireless@vger.kernel.org Cc: Brett Rudley <brudley@broadcom.com> Cc: Henry Ptasinski <henryp@broadcom.com> Cc: Roland Vossen <rvossen@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
staging: brcm80211: remove use of si_* functions from wlc_phy_lcn.c
The source file used si_alp_clock to determine crystal frequency.
It now uses the si_pmu_alp_clock call instead to remove dependency from
siutils functionality.
Cc: devel@linuxdriverproject.org Cc: linux-wireless@vger.kernel.org Cc: Brett Rudley <brudley@broadcom.com> Cc: Henry Ptasinski <henryp@broadcom.com> Cc: Roland Vossen <rvossen@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
staging: brcm80211: remove tsf retrieval from wlc_bmac.c
Upon receiving a packet the lowest 32 bits of tsf are filled in
by wlc_bmac in wlc_bmac_recv, but this is not useful as wlc_main
needs to reconstruct 64 bit tsf which is retrieves to recover the
actual tsf value at which packet is received. Therefore tsf
retrieval is removed from wlc_bmac.c.
Cc: devel@linuxdriverproject.org Cc: linux-wireless@vger.kernel.org Cc: Brett Rudley <brudley@broadcom.com> Cc: Henry Ptasinski <henryp@broadcom.com> Cc: Roland Vossen <rvossen@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
staging: brcm80211: provide TSF value in receive status
Packets passed to the mac80211 stack have a mactime field in the
receive status indicating the actual time it was received by the
phy radio. It was not (properly) filled in before this change.
Cc: devel@linuxdriverproject.org Cc: linux-wireless@vger.kernel.org Cc: Brett Rudley <brudley@broadcom.com> Cc: Henry Ptasinski <henryp@broadcom.com> Cc: Roland Vossen <rvossen@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
staging: brcm80211: remove queue info parameter from wlc_send_q
There is only one queue on which the wlc_send_q has to operate. This
queue is available under the struct wlc_info parameter passed so
the additional queue info parameter is redundant.
Cc: devel@linuxdriverproject.org Cc: linux-wireless@vger.kernel.org Cc: Brett Rudley <brudley@broadcom.com> Cc: Henry Ptasinski <henryp@broadcom.com> Cc: Roland Vossen <rvossen@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The queue for pending transmit packets is called active_queue, but
the driver is only using one single queue. Therefor a more appro-
priate name has been given, ie. pkt_queue.
Cc: devel@linuxdriverproject.org Cc: linux-wireless@vger.kernel.org Cc: Brett Rudley <brudley@broadcom.com> Cc: Henry Ptasinski <henryp@broadcom.com> Cc: Roland Vossen <rvossen@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
staging: brcm80211: implement flush driver callback for mac80211
The mac80211 interface has a flush callback which is used by mac80211
to assure all pending transmit packets have been transmitted. This
is used before scanning off-channel.
Cc: devel@linuxdriverproject.org Cc: linux-wireless@vger.kernel.org Cc: Brett Rudley <brudley@broadcom.com> Cc: Henry Ptasinski <henryp@broadcom.com> Cc: Roland Vossen <rvossen@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Tue, 3 May 2011 09:35:21 +0000 (11:35 +0200)]
staging: brcm80211: made fullmac error codes more consistent
Code cleanup. The code contains several checks on the condition
SDIOH_API_SUCCESS(status). On failure, the error returned depended on the
check, instead of being consistent. This has been corrected.
Cc: devel@linuxdriverproject.org Cc: linux-wireless@vger.kernel.org Cc: Brett Rudley <brudley@broadcom.com> Cc: Henry Ptasinski <henryp@broadcom.com> Cc: Roland Vossen <rvossen@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Tue, 3 May 2011 09:35:18 +0000 (11:35 +0200)]
staging: brcm80211: removed error string function
Only fullmac used this functionality, in which a broadcom specific error
code was converted to a human readable string. Since this functionality
is not needed, a function and accompanying data structures have been
removed.
Cc: devel@linuxdriverproject.org Cc: linux-wireless@vger.kernel.org Cc: Brett Rudley <brudley@broadcom.com> Cc: Henry Ptasinski <henryp@broadcom.com> Cc: Roland Vossen <rvossen@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Tue, 3 May 2011 09:35:15 +0000 (11:35 +0200)]
staging: brcm80211: removed ASSERTs from wlc_main.c
Driver contains far too many ASSERTs. Functions that were only used
from within removed ASSERTs have also been deleted, such as
wlc_bmac_taclear() in wlc_bmac.c.
Cc: devel@linuxdriverproject.org Cc: linux-wireless@vger.kernel.org Cc: Brett Rudley <brudley@broadcom.com> Cc: Henry Ptasinski <henryp@broadcom.com> Cc: Roland Vossen <rvossen@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
staging: brcm80211: honour basic rate configuration from mac80211
The basic rates to be used are provided by the wireless access point
within the beacon information. The station should conform to those
rates and this information is passed by mac80211 to the driver. The
patch processes the information and applies the basic rates accor-
dingly. This is required functionality for mac80211 drivers.
Cc: devel@linuxdriverproject.org Cc: linux-wireless@vger.kernel.org Cc: Brett Rudley <brudley@broadcom.com> Cc: Henry Ptasinski <henryp@broadcom.com> Cc: Roland Vossen <rvossen@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The function is not required as the driver does honour the USE_RTS_CTS
flag. The mac80211 API notes state that either one or the other is required
(see http://wireless.kernel.org/en/developers/Documentation/mac80211/API).
Cc: devel@linuxdriverproject.org Cc: linux-wireless@vger.kernel.org Cc: Brett Rudley <brudley@broadcom.com> Cc: Henry Ptasinski <henryp@broadcom.com> Cc: Roland Vossen <rvossen@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
staging: brcm80211: remove unnecessary if statements from bss_info_changed
The mac80211 api callback bss_info_changed contained two placeholders
that were expected to need to be implemented. However, reading the mac80211
notes (http://wireless.kernel.org/en/developers/Documentation/mac80211/API)
shows that it is not needed as the driver honours the flags provided with
the transmit sk_buff.
Cc: devel@linuxdriverproject.org Cc: linux-wireless@vger.kernel.org Cc: Brett Rudley <brudley@broadcom.com> Cc: Henry Ptasinski <henryp@broadcom.com> Cc: Roland Vossen <rvossen@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Tue, 3 May 2011 09:35:05 +0000 (11:35 +0200)]
staging: brcm80211: making wiphy object accessible from wlc and phy
Next commits will replace WL_ERROR and friends with BCMMSG. Because
this new message log function require a wiphy object, device object pointers
have been added to three data structures.
Cc: devel@linuxdriverproject.org Cc: linux-wireless@vger.kernel.org Cc: Brett Rudley <brudley@broadcom.com> Cc: Henry Ptasinski <henryp@broadcom.com> Cc: Roland Vossen <rvossen@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Tue, 3 May 2011 09:35:01 +0000 (11:35 +0200)]
staging: brcm80211: fixed error in non-DHD_DEBUG fullmac build
A build error was introduced with recent fullmac changes when building without
debug option configured:
drivers/staging/brcm80211/brcmfmac/dhd_sdio.c: In function
‘dhdsdio_sdiod_drive_strength_init’:
drivers/staging/brcm80211/brcmfmac/dhd_sdio.c:6366:3: error: ‘chn’ undeclared
Cc: devel@linuxdriverproject.org Cc: linux-wireless@vger.kernel.org Cc: Brett Rudley <brudley@broadcom.com> Cc: Henry Ptasinski <henryp@broadcom.com> Cc: Roland Vossen <rvossen@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
If the wpa_supplicant conf file supplies both open and shared
algorithm, and AP is configured as shared then connection never
happens. Since it is a FMAC driver additional logic is added in
driver which first detects this, then tries open algorithm for the
first time and when it fails tries the shared algo.
kvalo: fix style issues
Signed-off-by: Naveen Singh <nsingh@atheros.com> Signed-off-by: Kalle Valo <kalle.valo@atheros.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
If a heavy traffic is undergoing and a link is lost (bcn miss),
wlan driver does a reconnection on its own and after connection
is re-established, reports it as ROAM_EVENT to cfg. Now this event
is handled as work queue. It could very well happen that by the
time this event gets handled, cfg would have aged out the bss and
we get the following WARN_ON in __cfg80211_roamed function in file
net/wireless/sme.c.
/* internal error -- how did we get to CONNECTED w/o BSS? */
if (WARN_ON(!wdev->current_bss)) {
return;
}
To resolve the issue we report the BSS whenever we send a connect or
roam event to the cfg.
kvalo: fix style issues
Signed-off-by: Naveen Singh <nsingh@atheros.com> Signed-off-by: Kalle Valo <kalle.valo@atheros.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
projects / mv-sheeva.git / log