staging: comedi: cb_das16_cs: convert driver to use the comedi_8254 module

The hardware supported by this drive has an 8254 timer. Currently this driver
does not use the timer functions.

For aesthetics, use the comedi_8254 module to provide support for the 8254
timer. This will ensure that the counters are all reset and make it easier
to add functionality later.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das16m1: convert driver to use the comedi_8254 module

This driver uses two 8254 timers. One to generate the analog input pacer clock and
one to count the number of samples. Convert it to use the comedi_8254 module to
provide support for the 8254 timers.

Use the comedi_device 'pacer' member for the 8254 timer used for analog input. This
data is freed automatically by the core during the detach of the driver.

Store the data for the 8254 timer used to count samples in the private data. This
data needs to be freed by the driver when it is detached.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: das800: convert driver to use the comedi_8254 module

This driver uses an 8254 timer to generate the pacer clock used for analog
input data acquisition. Convert it to use the comedi_8254 module to provide
support for the 8254 timer.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: cb_pcidas: convert driver to use the comedi_8254 module

This driver uses two 8254 timers to generate the pacer clocks. One for analog
input acquisition and one for analog output data conversion. Convert it to use
the comedi_8254 module to provide support for the 8254 timers.

Use the comedi_device 'pacer' member for the 8254 timer used for analog input.
This data is freed automatically by the core during the detach of the driver.

Store the data for the 8254 timer used for analog output in the private data.
This data needs to be freed by the driver when it is detached.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: amplc_pci224: convert driver to use the comedi_8254 module

This driver uses an 8254 timer to generate the pacer clock used for analog
output data conversion. Convert it to use the comedi_8254 module to provide
support for the 8254 timer.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: adl_pci9111: convert driver to use the comedi_8254 module

This driver uses an 8254 timer to generate the pacer clock used for analog
input data acquisition. Convert it to use the comedi_8254 module to provide
support for the 8254 timer.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl711: convert driver to use the comedi_8254 module

This driver uses an 8254 timer to generate the pacer clock used for analog
input data acquisition. Convert it to use the comedi_8254 module to provide
support for the 8254 timer.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl818: convert driver to use the comedi_8254 module

This driver uses an 8254 timer to generate the pacer clock used for analog
input data acquisition. Convert it to use the comedi_8254 module to provide
support for the 8254 timer.

Note that the pacer does not have to be stopped when starting a new async
command in pcl818_ai_cmd() or when the card is initialy reset by pcl818_reset().
The counters are all reset when the driver is initially attached and the
counters used by the pacer are stopped when a command is canceled.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl816: convert driver to use the comedi_8254 module

This driver uses an 8254 timer to generate the pacer clock used for analog
input data conversion. Convert it to use the comedi_8254 module to provide
support for the 8254 timer.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: pcl812: convert driver to use the comedi_8254 module

This driver uses an 8254 timer to generate the pacer clock used for analog
input data acquisition. Convert it to use the comedi_8254 module to provide
support for the 8254 timer.

Note that the pacer does not have to be stopped when starting a new async
command in pcl812_ai_cmd() or when the card is initialy reset by pcl812_reset().
The counters are all reset when the driver is initially attached and the
counters used by the pacer are stopped when a command is canceled.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: add 'pacer' member to struct comedi_device

Add a new member to the comedi_device struct for a comedi_8254 'pacer'. This
provides a convient place to store the data allocated by the comedi_8254 module
for boards that use an 8254 device to create the data acquisition pacer clock.

Automatically free this pointer in comedi_device_detach_cleanup() so that the
drivers don't need to do it when then are detached.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: comedi_8254: introduce module for 8254 timer support

A 8254 timer/counter is commonly used on data acquisition boards to provide
the internal pacer clock used to acquire analog input samples. Some boards
also to allow the timers to be used externally.

Currently the 8254 timers are supported by comedi using the 8253.h header
and a number of inline functions. This works for the internal pacer clock
but requires the drivers to implement subdevice code necessary to use the
timers externally.

Introduce a new module to support both the internal pacer clock and the
external counter subdevice. This will allow removing a bunch of duplicated
code in the drivers and standardizes the comedi 8254 timer support.

This implementation is based on the 8253.h inline functions and the various
subdevice functionality in the comedi drivers.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: rtd520: remove unnecessary interrupt disable

The read/write of the PLX_INTRCS_REG during the driver detach is not
necessary. The rtd_reset() function writes 0 to this register which
will disable all interrupts.

This also fixes a dereference after null check reported by coverity.

Reported-by: coverity (CID 751066)
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: cb_pcidas64: fix possible integer overflow

The {min,max}_scan_divisor values could overflow due to the
unsigned int * insigned int calculation. Change the type of the
local variable 'convert_divisor' to unsigned long long to avoid
the possible overflow.

Reported-by: coverity (CID 200653)
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: comedi: ni_labpc_common: fix logically dead code issue

The quick exit check of (mode == MODE_SINGLE_CHAN) results in coverity
reporting a logically dead code issue in the switch code in
labpc_ai_check_chanlist().

Remove the quick exit check and allow the function to handle the
MODE_SINGLE_CHAN normally (the for loop will only happen 1 time and
the function will return 0).

Reported-by: coverity (CID 1222108)
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: fld_request.c: Remove else after return.

    This patch fixes checkpatch.pl warning.
    WARNING: else is not generally useful after a break or return

Signed-off-by: Alberto Pires de Oliveira Neto <mrpenguin2005@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: android: ion: fix some format strings

C99 says that a precision which is simply '.' with no following digits
or * should be interpreted as 0, which means that these format strings
actually mean 'print 16 spaces'. However, the kernel's printf
implementation treats this case as if the precision was omitted. Don't
rely on that quirk.

Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: staging: lustre: Fix "space prohibited between function name and open parenthesis" errors

Fix checkpatch.ph errors "space prohibited between function name and
open parenthesis" in socklnd.h

Signed-off-by: Adrien Descamps <adrien.descamps@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: missing curly braces in ll_setattr_raw()

>From the indenting, it looks like curly braces were intended here.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lnet: lnet: Remove unneeded braces in lib-eq.c

This patch fixes the checkpatch.pl warning:

WARNING: braces {} are not necessary for single statement blocks

Signed-off-by: Edward Lipinsky <ellipinsky@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: llite: Remove unnecessary OOM message

This patch reduces the kernel size by removing error messages that duplicate
the normal OOM message.

Signed-off-by: Quentin Lambert <lambert.quentin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Move proc_*() functions inside #ifdef CONFIG_SYSCTL

If CONFIG_SYSCTL=n:

    drivers/staging/lustre/lustre/obdclass/linux/linux-sysctl.c:84: warning: ‘proc_set_timeout’ defined but not used
    drivers/staging/lustre/lustre/obdclass/linux/linux-sysctl.c:95: warning: ‘proc_memory_alloc’ defined but not used
    drivers/staging/lustre/lustre/obdclass/linux/linux-sysctl.c:119: warning: ‘proc_pages_alloc’ defined but not used
    drivers/staging/lustre/lustre/obdclass/linux/linux-sysctl.c:143: warning: ‘proc_mem_max’ defined but not used
    drivers/staging/lustre/lustre/obdclass/linux/linux-sysctl.c:167: warning: ‘proc_pages_max’ defined but not used
    drivers/staging/lustre/lustre/obdclass/linux/linux-sysctl.c:191: warning: ‘proc_max_dirty_pages_in_mb’ defined but not used
    drivers/staging/lustre/lustre/obdclass/linux/linux-sysctl.c:232: warning: ‘proc_alloc_fail_rate’ defined but not used

Make the existing #ifdef CONFIG_SYSCTL cover all sysctl-related
functions to fix this.

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: resolves sparse warnings using static declaration

This patch resolves sparse warnings about non-declared symbol in
staging/lustre/lustre/lov by adding static declaration.
These warnings are like this:
warning: symbol 'fiemap_calc_fm_end_offset' was not declared. Should it be static?

Signed-off-by: Le Tan <tamlok@live.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: lustre: lov: lov_dev: fix sparse warning of static declaration

This patch adds a static keyword to cl_lov_device_mutex_class variable
to suppress the warning of static declaration

Signed-off-by: Mohammad Jamal <md.jamalmohiuddin@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Make the function 'llog_cat_process_cb' static

This patch defines the function 'llog_cat_process_cb' as static

Signed-off-by: Arjun AK <arjunak234@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: use linux headers

WARNING: Use #include <linux/uaccess.h> instead of <asm/uaccess.h>
WARNING: Use #include <linux/statfs.h> instead of <asm/statfs.h>
WARNING: Use #include <linux/kgdb.h> instead of <asm/kgdb.h>

Signed-off-by: Asaf Vertz <asaf.vertz@tandemg.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Convert remaining uses of "= seq_printf(...)"

The seq_printf return value, because it's frequently misused,
will eventually be converted to void.

See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to
     seq_has_overflowed() and make public")

Convert the remaining uses by hand.

Miscellanea:

o Convert fixed string output to seq_puts

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Convert seq_ hash functions to return void

These functions don't need to return anything.
No caller uses the return value.

Miscellanea:

Integrate the individual strings to reduce object size ~100 bytes.

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Convert "return seq_printf(...)" uses

The seq_printf return value, because it's frequently misused,
will eventually be converted to void.

See: commit 1f33c41c03da ("seq_file: Rename seq_overflow() to
     seq_has_overflowed() and make public")

Convert these "return seq_printf(...)" uses to:

seq_printf(seq, ...);
return 0;

Done via cocci script:

@@
struct seq_file *seq;
@@

- return
\(seq_printf\|seq_puts\|seq_putc\)(seq,
...);

+ return 0;

With some additional reformatting and typing post conversion.

Miscellanea:

o convert an rc++ use to a bool
o use seq_puts with fixed strings where appropriate

Signed-off-by: Joe Perches <joe@perches.com>
Cc: Oleg Drokin <oleg.drokin@intel.com>
Cc: Andreas Dilger <andreas.dilger@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: fbtft: fix space errors

This patch fixes the following errors:
ERROR: space required after that ','
ERROR: trailing whitespace

Signed-off-by: Matteo Semenzato <mattew8898@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: fbtft-io: Use '%zu' to print 'size_t' format

When building for ARM64 the following build warnings are seen:

drivers/staging/fbtft/fbtft-io.c: In function 'fbtft_write_spi_emulate_9':
drivers/staging/fbtft/fbtft-io.c:63:4: warning: format '%d' expects argument of type 'int', but argument 4 has type 'size_t' [-Wformat=]

drivers/staging/fbtft/fbtft-io.c: In function 'fbtft_read_spi':
drivers/staging/fbtft/fbtft-io.c:110:5: warning: format '%d' expects argument of type 'int', but argument 4 has type 'size_t' [-Wformat=]

Use '%zu' to print 'size_t' format.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: fbtft-core: Use '%zu' to print 'size_t' format

When building for ARM64 the following build warning is seen:

drivers/staging/fbtft/fbtft-core.c:1004:4: warning: format '%d' expects argument of type 'int', but argument 3 has type 'size_t' [-Wformat=]

Use '%zu' to print 'size_t' format.

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: fbtft: Fix Sparse warnings

This fixes the folowing sparse warnings:

fb_hx8340bn.c:111:6: warning: symbol 'set_addr_win' was not declared. Should it be static?
fbtft_device.c:32:19: warning: symbol 'spi_device' was not declared. Should it be static?
fbtft_device.c:33:24: warning: symbol 'p_device' was not declared. Should it be static?

Signed-off-by: Frederic Jacob <frederic.jacob.78@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192u: ieee80211: Add blank line after declarations

The following patch fixes the checkpatch.pl warning:
drivers/staging/rtl8192u/ieee80211/ieee80211_crypt_wep.c WARNING:
Missing a blank line after declarations

Signed-off-by: Hatice ERTURK <haticeerturk27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: Remove <linux/moduleparam.h> header.

This patch drops #include <linux/moduleparam.h> in all the staging
driver files that also include #include <linux/module.h> as
module.h includes moduleparam.h already.

The following semantic patch is used to make these changes:

@ includesmodule @
@@
@ depends on includesmodule @
@@
- #include <linux/moduleparam.h>

Signed-off-by: Navya Sri Nizamkari <navyasri.tech@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: media: Remove redundant memset.

The memory area set by the call to memset is immediately
overwritten by the subsequent call to memcpy. Hence, remove that
redundant memset.

Signed-off-by: Navya Sri Nizamkari <navyasri.tech@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: media: Remove memset.

The memory area set by the call to memset is immediately
overwritten by the subsequent call to memcpy. Hence, remove that
redundant memset.

Signed-off-by: Navya Sri Nizamkari <navyasri.tech@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192u: ieee80211: Convert comment from C99 style to C89 style

This patch fixes the checkpatch.pl error:
ERROR: "Do not use C99 // comments"

Signed-off-by: Hatice ERTURK <haticeerturk27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192e: rtl8192e: fix space prohibited before that ','

This patch fixes the following checkpatch.pl error:
space prohibited before that ','

Signed-off-by: Hatice ERTURK <haticeerturk27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192e: Remove unneeded brackets.

These were detected with this Coccinelle script:
@@
identifier f1, f2, f3;
constant c;
@@

f1 =
(
- (f2 << f3)
+ f2 << f3
|
- (f2 >> f3)
+ f2 >> f3
|
- (f2 << c)
+ f2 << c
|
- (f2 >> c)
+ f2 >> c
)

Signed-off-by: Vatika Harlalka <vatikaharlalka@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192e: Fix line over 80 characters

This patch fixes line to fit 80 characters.
Issue found by checkpatch.pl

Signed-off-by: Ksenija Stanojevic <ksenija.stanojevic@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192e: Use ether_addr_copy() instead of memcpy()

This patch replaces memcpy with ether_addr_copy.
Also pathole was used to make sure that arguments passed to ether_addr_copy
are aligned to u16.
First argument is iwe.u.ap_addr.sa_data i output of pahole is:
struct iw_event {
__u16                      len;                  /*     0     2 */
__u16                      cmd;                  /*     2     2 */

/* XXX 4 bytes hole, try to pack */

union iwreq_data           u;                    /*     8    16 */

/* size: 24, cachelines: 1, members: 3 */
/* sum members: 20, holes: 1, sum holes: 4 */
/* last cacheline: 24 bytes */
};
and inside union iwreq_data u is sa_data:
struct sockaddr {
/* typedef sa_family_t -> __kernel_sa_family_t */ short unsigned int sa_family; /*     8     2 */
char       sa_data[14];                                          /*    10    14 */
} ap_addr; /*          16 */

sa_data is a char array of size 14, and the number of bytes copied using
ether_addr_copy() is 6.

Second argument is network->bssid and output of pahole is:
struct rtllib_network {
u8                         bssid[6];             /*     0     6 */
u8                         channel;              /*     6     1 */
u8                         ssid[33];             /*     7    33 */
u8                         ssid_len;             /*    40     1 */
u8                         hidden_ssid[33];      /*    41    33 */
/* --- cacheline 1 boundary (64 bytes) was 10 bytes ago --- */
u8                         hidden_ssid_len;      /*    74     1 */

/* XXX 1 byte hole, try to pack */

struct rtllib_qos_data     qos_data;             /*    76    48 */
bool                       bWithAironetIE;       /*   124     1 */
bool                       bCkipSupported;       /*   125     1 */
bool                       bCcxRmEnable;         /*   126     1 */

/* XXX 1 byte hole, try to pack */

/* --- cacheline 2 boundary (128 bytes) --- */
u16                        CcxRmState[2];        /*   128     4 */
bool                       bMBssidValid;         /*   132     1 */
u8                         MBssidMask;           /*   133     1 */
u8                         MBssid[6];            /*   134     6 */
bool                       bWithCcxVerNum;       /*   140     1 */
u8                         BssCcxVerNumber;      /*   141     1 */

/* XXX 2 bytes hole, try to pack */

struct rtllib_rx_stats     stats;                /*   144   120 */
/* --- cacheline 4 boundary (256 bytes) was 8 bytes ago --- */
u16                        capability;           /*   264     2 */
u8                         rates[12];            /*   266    12 */
u8                         rates_len;            /*   278     1 */
u8                         rates_ex[16];         /*   279    16 */
u8                         rates_ex_len;         /*   295     1 */
long unsigned int          last_scanned;         /*   296     8 */
u8                         mode;                 /*   304     1 */

/* XXX 3 bytes hole, try to pack */

u32                        flags;                /*   308     4 */
u32                        last_associate;       /*   312     4 */
u32                        time_stamp[2];        /*   316     8 */
/* --- cacheline 5 boundary (320 bytes) was 4 bytes ago --- */
u16                        beacon_interval;      /*   324     2 */
u16                        listen_interval;      /*   326     2 */
u16                        atim_window;          /*   328     2 */
u8                         erp_value;            /*   330     1 */
u8                         wpa_ie[64];           /*   331    64 */

/* XXX 5 bytes hole, try to pack */

/* --- cacheline 6 boundary (384 bytes) was 16 bytes ago --- */
size_t                     wpa_ie_len;           /*   400     8 */
u8                         rsn_ie[64];           /*   408    64 */
/* --- cacheline 7 boundary (448 bytes) was 24 bytes ago --- */
size_t                     rsn_ie_len;           /*   472     8 */
u8                         wzc_ie[256];          /*   480   256 */
/* --- cacheline 11 boundary (704 bytes) was 32 bytes ago --- */
size_t                     wzc_ie_len;           /*   736     8 */
struct rtllib_tim_parameters tim;                /*   744     2 */
u8                         dtim_period;          /*   746     1 */
u8                         dtim_data;            /*   747     1 */

/* XXX 4 bytes hole, try to pack */

u64                        last_dtim_sta_time;   /*   752     8 */
u8                         wmm_info;             /*   760     1 */

/* XXX 1 byte hole, try to pack */

struct rtllib_wmm_ac_param wmm_param[4];         /*   762    16 */
/* --- cacheline 12 boundary (768 bytes) was 10 bytes ago --- */
u8                         Turbo_Enable;         /*   778     1 */

/* XXX 1 byte hole, try to pack */

u16                        CountryIeLen;         /*   780     2 */
u8                         CountryIeBuf[255];    /*   782   255 */

/* XXX 3 bytes hole, try to pack */

/* --- cacheline 16 boundary (1024 bytes) was 16 bytes ago --- */
struct bss_ht              bssht;                /*  1040    84 */
/* --- cacheline 17 boundary (1088 bytes) was 36 bytes ago --- */
bool                       broadcom_cap_exist;   /*  1124     1 */
bool                       realtek_cap_exit;     /*  1125     1 */
bool                       marvell_cap_exist;    /*  1126     1 */
bool                       ralink_cap_exist;     /*  1127     1 */
bool                       atheros_cap_exist;    /*  1128     1 */
bool                       cisco_cap_exist;      /*  1129     1 */
bool                       airgo_cap_exist;      /*  1130     1 */
bool                       unknown_cap_exist;    /*  1131     1 */
bool                       berp_info_valid;      /*  1132     1 */
bool                       buseprotection;       /*  1133     1 */
bool                       bIsNetgear854T;       /*  1134     1 */
u8                         SignalStrength;       /*  1135     1 */
u8                         RSSI;                 /*  1136     1 */

/* XXX 7 bytes hole, try to pack */

struct list_head           list;                 /*  1144    16 */
/* --- cacheline 18 boundary (1152 bytes) was 8 bytes ago --- */

/* size: 1160, cachelines: 19, members: 61 */
/* sum members: 1132, holes: 10, sum holes: 28 */
/* last cacheline: 8 bytes */
};

network->bssid is char array of size 6.

Issue found by checkpatch.pl

Signed-off-by: Ksenija Stanojevic <ksenija.stanojevic@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192e: Replace printk with netdev_dbg, netdev_info, or netdev_warn

For network systems netdev_dbg, netdev_info or netdev_warn is preferred over
printk. Issue found by checkpatch.pl

Signed-off-by: Ksenija Stanojevic <ksenija.stanojevic@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192u: Replace printk() with netdev_dbg()

For dynamic debugging netdev_dbg (if there is a ponterto a device
net structure) is preferred over printk(), which is the raw way
to print something. Issue found by checkpatch.pl.

Signed-off-by: Ksenija Stanojevic <ksenija.stanojevic@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192u: Fix line over 80 characters

This patch splits the line so that doesn't exceeds 80 character mark.
Issue found by checkpatch.pl

Signed-off-by: Ksenija Stanojevic <ksenija.stanojevic@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192u: Fix comments

This patch fixes comments to fit kernel coding style rules,
and also removes commented header file linux/wireless.h. Issue
found by checkpatch.pl.

Signed-off-by: Ksenija Stanojevic <ksenija.stanojevic@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8712: Use del_timer

Use timer API function del_timer instead of driver
specific function _cancel_timer_ex as it is a standard
way for deactivating a timer.

This is done using Coccinelle and semantic patch used for
this is as follows:

@@ expression x; @@
- _cancel_timer_ex (&x);
+ del_timer (&x);

Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192u: Remove TRUE and FALSE macros

Remove TRUE and FALSE boolean macros, since Linux kernel has already a
boolean type, bool, defined in linux/stddef.h

Signed-off-by: Ksenija Stanojevic <ksenija.stanojevic@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192u: Replace TRUE and FALSE macros

Replace all occurrences of TRUE and FALSE by true and false
respectively.

Signed-off-by: Ksenija Stanojevic <ksenija.stanojevic@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8712: Eliminate use of _set_timer

This patch introduces the use of API function mod_timer
instead of driver specific function _set_timer as it is
a more efficient and standard way to update the expire
field of an active timer. Also, definition of function
_set_timer is removed as it is no longer needed after
this change.

Here, these cases are handled using Coccinelle and
semantic patch used for this is as follows:

@@ expression x; expression y;@@

- _set_timer (&x, y);
+ mod_timer (&x, jiffies + msecs_to_jiffies (y));

Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: gdm72xx: Condense two statements into one to improve code readability.

This patch removes a variable assignmnet to a value, used only
for returning that value. The following coccinelle script was
used to discover it:

@@
expression ret;
identifier f;
@@

-ret =
+return
     f(...);
     -return ret;

Signed-off-by: Navya Sri Nizamkari <navyasri.tech@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: dgap: remove unused variable

This patch removes a variable that was simply used to
store the return value of a function call before
returning it.

The issue was detected and resolved using the following
coccinelle script:

@@
identifier len,f;
@@

-int len;
 ... when != len
     when strict
-len =
+return
        f(...);
-return len;

Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: fbtft: remove unused variable

This patch removes a variable that was simply used to
store the return value of a function call before
returning it.

The issue was detected and resolved using the following
coccinelle script:

@@
identifier len,f;
@@

-int len;
 ... when != len
     when strict
-len =
+return
        f(...);
-return len;

Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: Fix __packed is preferred over __attribute__((packed)) in libcfs_kernelcomm.h

Fix checkpatch.pl issues with  __packed is preferred over __attribute__((packed)) in libcfs_kernelcomm.h

Signed-off-by: Dilek Uzulmez <dilekuzulmez@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: Remove space after function name

Fix checkpatch.pl issues with "space prohibited between function name
and open parenthesis" in lporc_echo.c

Signed-off-by: Dilek Uzulmez <dilekuzulmez@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: Remove space in function call.

This patch fixes the following checkpatch.pl warning:

WARNING: space prohibited between function name and open parenthesis '('

Signed-off-by: Navya Sri Nizamkari <navyasri.tech@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: Fix externs should be avoided in .c

This patch moves extern declaration to ldlm_internal.h.
Remove prototype from ldlm_lockd.c and ldlm_lock.c.
Issue addressed by checkpatch.pl.

Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre:lnet: klnds: socklnd: Remove space after the name of that function

Function names must be adjacent to the parenthesis opened after.That's
why remove space after the name of that function.

This Warning found with checkpatch.pl

Signed-off-by: Hatice ERTURK <haticeerturk27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: lustre: ldlm: Concatenate strings into single string

This patch concatenate two consecutive strings into one, addressing checkpatch.pl warning:
 "Consecutive strings are generally better as a single string"

Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: lustre: idlm: Move trailing statement to next line

This patch Fix both "trailing statement should be on next line"
and space before semicolon errors addressed by checkpatch.pl

Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: lnet: klnds: o2iblnd: Remove space after the name of that function

Function names must be adjacent to the parenthesis opened after.That's
why remove space after the name of that function.

This Warning found with checkpatch.pl

Signed-off-by: Hatice ERTURK <haticeerturk27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: __aligned(size) is preferred over __attribute__((aligned(size)))

This patch fixes the checkpatch.pl warning in the drivers/staging/lustre/include/linux/libcfs/libcfs_kernelcomm.h

Signed-off-by: Dilek Uzulmez <dilekuzulmez@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: lnet: klnds: socklnd: Remove space after the name of that function

Function names must be adjacent to the parenthesis opened after.That's
why remove space after the name of that function.

This Warning found with checkpatch.pl

Signed-off-by: Hatice ERTURK <haticeerturk27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: Deleted space prohibited between function name and open parenthesis

WARNING: space prohibited between function name and open parenthesis '('
Remove unnecessary space between function name and opening parenthesis.
That was found by running checkpatch.pl

Signed-off-by: Dilek Uzulmez <dilekuzulmez@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: lnet: klnds: socklnd: Remove space after the name of that function

Fix checkpatch.pl issues with "space prohibited between function name
and open parenthesis" in socklnd

Signed-off-by: Hatice ERTURK <haticeerturk27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: lnet: lnet: Remove space after the name of that function

Fix checkpatch.pl issues with "space prohibited between function name
and open parenthesis" in router.c

Signed-off-by: Hatice ERTURK <haticeerturk27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: Deleted space prohibited between function name and open parenthesis

WARNING: space prohibited between function name and open parenthesis '('
Remove unnecessary space between function name and opening parenthesis.
That was found by running checkpatch

Signed-off-by: Melike Yurtoglu <aysemelikeyurtoglu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: lnet: selftest: Trailing statements

Trailing statements should be on next line.
This Error found with checkpatch.pl

Signed-off-by: Hatice ERTURK <haticeerturk27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: Removed necessary braces {}

Deleted {}.Because braces {} are not necessary for single statement
blocks

Signed-off-by: Melike Yurtoglu <aysemelikeyurtoglu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: lnet: selftest: Remove space after the name of that function

Fix checkpatch.pl issues with "space prohibited between function name
and open parenthesis" in rpc.c

Signed-off-by: Hatice ERTURK <haticeerturk27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: Deleted space prohibited between function name and open parenthesis

WARNING: space prohibited between function name and open parenthesis '('
Remove unnecessary space between function name and opening parenthesis.
That was found by running checkpatch

Signed-off-by: Melike Yurtoglu <aysemelikeyurtoglu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: Added const

WARNING: struct file_operations should normally be const.
That was found by running checkpatch.

Signed-off-by: Melike Yurtoglu <aysemelikeyurtoglu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: lnet: selftest: Remove space after the name of that function

Fix checkpatch.pl issues with "space prohibited between function name
and open parenthesis" in console.c

Signed-off-by: Hatice ERTURK <haticeerturk27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: Removed space prohibited

WARNING:  space prohibited before that '--'
Removed space prohibited. That was found by running checkpatch.

Signed-off-by: Melike Yurtoglu <aysemelikeyurtoglu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: Deleted space prohibited between function name and open parenthesis

WARNING: space prohibited between function name and open parenthesis '('
Remove unnecessary space between function name and opening parenthesis.
That was found by running checkpatch

Signed-off-by: Melike Yurtoglu <aysemelikeyurtoglu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: Remove unnecessary else after return

WARNING: else is not generally useful after a break or return
Remove unnecessary else after return. That was found by running
checkpatch

Signed-off-by: Melike Yurtoglu <aysemelikeyurtoglu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: Remove return in void function

WARNING: void function return statements are not generally useful
Remove return in void function. That was found by running checkpatch.

Signed-off-by: Melike Yurtoglu <aysemelikeyurtoglu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: Add blank line after declarations

WARNING: "Missing a blank line after declarations"
Add blank line after declarations. That was found by running checkpatch

Signed-off-by: Melike Yurtoglu <aysemelikeyurtoglu@gmail.com>
Reviewed-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: lustre: obdecho: Add blank line after declarations

The following patch fixes the checkpatch.pl warning:
drivers/staging/lustre/lustre/obdecho/echo_client.c WARNING: Missing a blank line after declarations

Signed-off-by: Hatice ERTURK <haticeerturk27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: lustre: ldlm: Fix do not add new typedefs

This patch fixes "do not add new typedefs" warning generated by
checkpatch.pl.
Update related files.

Signed-off-by: Haneen Mohammed <hamohammed.sa@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: Added #include <linux/statfs.h> instead of #include <asm/statfs.h>

The following patch fixes the checkpatch.pl warning:
WARNING: Use #include <linux/statfs.h> instead of #include <asm/statfs.h>

Signed-off-by: Dilek Uzulmez <dilekuzulmez@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: osc: remove unused variable

This patch removes a variable that was simply used to
store the return value of a function call before
returning it.

The issue was detected and resolved using the following
coccinelle script:

@@
identifier len,f;
@@

-int len;
 ... when != len
     when strict
-len =
+return
        f(...);
-return len;

Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: obdecho: remove unused variable

This patch removes a variable that was simply used to
store the return value of a function call before
returning it.

The issue was detected and resolved using the following
coccinelle script:

@@
identifier len,f;
@@

-int len;
 ... when != len
     when strict
-len =
+return
        f(...);
-return len;

Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: obdclass: remove unused variable

This patch removes a variable that was simply used to
store the return value of a function call before
returning it.

The issue was detected and resolved using the following
coccinelle script:

@@
identifier len,f;
@@

-int len;
 ... when != len
     when strict
-len =
+return
        f(...);
-return len;

Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: obdclass: remove unused variable

This patch removes a variable that was simply used to
store the return value of a function call before
returning it.

The issue was detected and resolved using the following
coccinelle script:

@@
identifier len,f;
@@

-int len;
 ... when != len
     when strict
-len =
+return
        f(...);
-return len;

Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: mgc: remove unused variable

This patch removes a variable that was simply used to
store the return value of a function call before
returning it.

The issue was detected and resolved using the following
coccinelle script:

@@
identifier len,f;
@@

-int len;
 ... when != len
     when strict
-len =
+return
        f(...);
-return len;

Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: mdc: remove unused variable

This patch removes a variable that was simply used to
store the return value of a function call before
returning it.

The issue was detected and resolved using the following
coccinelle script:

@@
identifier len,f;
@@

-int len;
 ... when != len
     when strict
-len =
+return
        f(...);
-return len;

Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: llite: remove unused variable

This patch removes a variable that was simply used to
store the return value of a function call before
returning it.

The issue was detected and resolved using the following
coccinelle script:

@@
identifier len,f;
@@

-int len;
 ... when != len
     when strict
-len =
+return
        f(...);
-return len;

Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: llite: remove unused variable

This patch removes a variable that was simply used to
store the return value of a function call before
returning it.

The issue was detected and resolved using the following
coccinelle script:

@@
identifier len,f;
@@

-int len;
 ... when != len
     when strict
-len =
+return
        f(...);
-return len;

Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: lustre: ptlrpc: Add space

ERROR: "(foo*)" should be "(foo *)".That's why add space together.
That Error found with checkpatch.pl

Signed-off-by: Hatice ERTURK <haticeerturk27@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: lustre: ptlrpc: remove unused variable

This patch removes a variable that was simply used to
store the return value of a function call before
returning it.

The issue was detected and resolved using the following
coccinelle script:

@@
identifier len,f;
@@

-int len;
 ... when != len
     when strict
-len =
+return
        f(...);
-return len;

Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: iio: light: remove unused variable

This patch removes a variable that was simply used to
store the return value of a function call before
returning it.

The issue was detected and resolved using the following
coccinelle script:

@@
identifier len,f;
@@

-int len;
 ... when != len
     when strict
-len =
+return
        f(...);
-return len;

Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: iio: meter: remove unused variable

This patch removes a variable that was simply used to
store the return value of a function call before
returning it.

The issue was detected and resolved using the following
coccinelle script:

@@
identifier len,f;
@@

-int len;
 ... when != len
     when strict
-len =
+return
        f(...);
-return len;

Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: remove unused variable

This patch removes variables that were simply used to
store the return value of a function call before
returning it.

The issue was detected and resolved using the following
coccinelle script:

@@
identifier len,f;
@@

-int len;
 ... when != len
     when strict
-len =
+return
        f(...);
-return len;

Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wlan-ng: remove unused variable

This patch removes a variable that was simply used to
store the return value of a function call before
returning it.

The issue was detected and resolved using the following
coccinelle script:

@@
identifier len,f;
@@

-int len;
 ... when != len
     when strict
-len =
+return
        f(...);
-return len;

Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8723au: Remove white space before semicolon

drivers/staging/rtl8723au/core/rtw_cmd.c warning: space prohibited before semicolon

Signed-off-by: Yeliz Taneroglu <yeliztaneroglu@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove memset.

The memory area set by the call to memset is immediately
overwritten by the subsequent call to memcpy. Hence, remove that
redundant memset.

Signed-off-by: Navya Sri Nizamkari <navyasri.tech@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Add blank line after declarations

This patch removes the following checkpatch.pl warning:

WARNING: Missing a blank line after declarations

Signed-off-by: Navya Sri Nizamkari <navyasri.tech@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Compress two statements into one.

This patch removes the use of a variable used only for
returning a value. The following coccinelle script was
used to discover it:

@@
expression ret;
identifier f;
@@

-ret =
+return
     f(...);
     -return ret;

It also fixes the checkpatch.pl warning about line being over
80 characters, in the lines where changes were made.

Signed-off-by: Navya Sri Nizamkari <navyasri.tech@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8188eu: Remove unused variable

Remove unused variable assignment for is2t and assign
sim_bitmap at declaration to make the code more compact.

Signed-off-by: Vatika Harlalka <vatikaharlalka@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>