David S. Miller [Tue, 3 Jan 2017 16:00:28 +0000 (11:00 -0500)]
Merge branch 'TPACKET_V3-TX_RING-support'
Sowmini Varadhan says:
====================
TPACKET_V3 TX_RING support
This patch series allows an application to use a single PF_PACKET
descriptor and leverage the best implementations of TX_RING
and RX_RING that exist today.
Patch 1 adds the kernel/Documentation changes for TX_RING
support and patch2 adds the associated test case in selftests.
Changes since v2: additional sanity checks for setsockopt
input for TX_RING/TPACKET_V3. Refactored psock_tpacket.c
test code to avoid code duplication from V2.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Although TPACKET_V3 Rx has some benefits over TPACKET_V2 Rx, *_v3
does not currently have TX_RING support. As a result an application
that wants the best perf for Tx and Rx (e.g. to handle request/response
transacations) ends up needing 2 sockets, one with *_v2 for Tx and
another with *_v3 for Rx.
This patch enables TPACKET_V2 compatible Tx features in TPACKET_V3
so that an application can use a single descriptor to get the benefits
of _v3 RX_RING and _v2 TX_RING. An application may do a block-send by
first filling up multiple frames in the Tx ring and then triggering a
transmit. This patch only support fixed size Tx frames for TPACKET_V3,
and requires that tp_next_offset must be zero.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
ipmr, ip6mr: add RTNH_F_UNRESOLVED flag to unresolved cache entries
While working with ipmr, we noticed that it is impossible to determine
if an entry is actually unresolved or its IIF interface has disappeared
(e.g. virtual interface got deleted). These entries look almost
identical to user-space when dumping or receiving notifications. So in
order to recognize them add a new RTNH_F_UNRESOLVED flag which is set when
sending an unresolved cache entry to user-space.
Suggested-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Some devices, such as the mv88e6097 do have ADDR[0] external and so it
is possible to configure the device to use SMI address 0x1. Remove the
restriction, as there are boards using this address.
Signed-off-by: Volodymyr Bendiuga <volodymyr.bendiuga@westermo.se> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Tue, 3 Jan 2017 14:45:44 +0000 (09:45 -0500)]
Merge branch 'for_4.11/net-next/rds_v3' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux
Santosh Shilimkar says:
====================
net: RDS updates
v2->v3:
- Re-based against latest net-next head.
- Dropped a user visible change after discussing with David Miller.
It needs some more work to fully support old/new tools matrix.
- Addressed Dave's comment about bool usage in patch
"RDS: IB: track and log active side..."
v1->v2:
Re-aligned indentation in patch 'RDS: mark few internal functions..."
Series consist of:
- RDMA transport fixes for map failure, listen sequence, handler panic and
composite message notification.
- Couple of sparse fixes.
- Message logging improvements for bind failure, use once mr semantics
and connection remote address, active end point.
- Performance improvement for RDMA transport by reducing the post send
pressure on the queue and spreading the CQ vectors.
- Useful statistics for socket send/recv usage and receive cache usage.
- Additional RDS CMSG used by application to track the RDS message
stages for certain type of traffic to find out latency spots.
Can be enabled/disabled per socket.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
RDS: add receive message trace used by application
Socket option to tap receive path latency in various stages
in nano seconds. It can be enabled on selective sockets using
using SO_RDS_MSG_RXPATH_LATENCY socket option. RDS will return
the data to application with RDS_CMSG_RXPATH_LATENCY in defined
format. Scope is left to add more trace points for future
without need of change in the interface.
Avinash Repaka [Mon, 29 Feb 2016 23:30:57 +0000 (15:30 -0800)]
RDS: make message size limit compliant with spec
RDS support max message size as 1M but the code doesn't check this
in all cases. Patch fixes it for RDMA & non-RDMA and RDS MR size
and its enforced irrespective of underlying transport.
RDS: IB: fix panic due to handlers running post teardown
Shutdown code reaping loop takes care of emptying the
CQ's before they being destroyed. And once tasklets are
killed, the hanlders are not expected to run.
But because of core tasklet code issues, tasklet handler could
still run even after tasklet_kill,
RDS IB shutdown code already reaps the CQs before freeing
cq/qp resources so as such the handlers have nothing left
to do post shutdown.
On other hand any handler running after teardown and trying
to access already freed qp/cq resources causes issues
Patch fixes this race by makes sure that handlers returns
without any action post teardown.
RDS: RDMA: Fix the composite message user notification
When application sends an RDS RDMA composite message consist of
RDMA transfer to be followed up by non RDMA payload, it expect to
be notified *only* when the full message gets delivered. RDS RDMA
notification doesn't behave this way though.
Thanks to Venkat for debug and root casuing the issue
where only first part of the message(RDMA) was
successfully delivered but remainder payload delivery failed.
In that case, application should not be notified with
a false positive of message delivery success.
Fix this case by making sure the user gets notified only after
the full message delivery.
In absence of extension headers, message log will keep
flooding the console. As such even without use_once we can
clean up the MRs so its not really an error case message
so make it debug message
RDS: IB: split the mr registration and invalidation path
MR invalidation in RDS is done in background thread and not in
data path like registration. So break the dependency between them
which helps to remove the performance bottleneck.
RDS: RDMA: return appropriate error on rdma map failures
The first message to a remote node should prompt a new
connection even if it is RDMA operation. For RDMA operation
the MR mapping can fail because connections is not yet up.
Since the connection establishment is asynchronous,
we make sure the map failure because of unavailable
connection reach to the user by appropriate error code.
Before returning to the user, lets trigger the connection
so that its ready for the next retry.
RDS: mark few internal functions static to make sparse build happy
Fixes below warnings:
warning: symbol 'rds_send_probe' was not declared. Should it be static?
warning: symbol 'rds_send_ping' was not declared. Should it be static?
warning: symbol 'rds_tcp_accept_one_path' was not declared. Should it be static?
warning: symbol 'rds_walk_conn_path_info' was not declared. Should it be static?
Philippe Reynes [Sun, 1 Jan 2017 19:49:26 +0000 (20:49 +0100)]
net: dlink: dl2k: use new api ethtool_{get|set}_link_ksettings
The ethtool api {get|set}_settings is deprecated.
We move this driver to new api {get|set}_link_ksettings.
The previous implementation of set_settings was modifying
the value of speed and duplex, but with the new API, it's not
possible. The structure ethtool_link_ksettings is defined
as const.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 2 Jan 2017 20:51:21 +0000 (15:51 -0500)]
Merge branch 'mlx5-odp'
Saeed Mahameed says:
====================
Mellanox mlx5 core and ODP updates 2017-01-01
The following eleven patches mainly come from Artemy Kovalyov
who expanded mlx5 on-demand-paging (ODP) support. In addition
there are three cleanup patches which don't change any functionality,
but are needed to align codebase prior accepting other patches.
Memory region (MR) in IB can be huge and ODP (on-demand paging)
technique allows to use unpinned memory, which can be consumed and
released on demand. This allows to applications do not pin down
the underlying physical pages of the address space, and save from them
need to track the validity of the mappings.
Rather, the HCA requests the latest translations from the OS when pages
are not present, and the OS invalidates translations which are no longer
valid due to either non-present pages or mapping changes.
In existing ODP implementation applications is needed to register
memory buffers for communication, though registered memory regions
need not have valid mappings at registration time.
This patch set performs the following steps to expand
current ODP implementation:
1. It refactors UMR to support large regions, by introducing generic
function to perform HCA translation table modifications. This
function supports both atomic and process contexts and is not limited
by number of modified entries.
This function allows to enable reallocated memory regions of
arbitrary size, so adding MR cache buckets to support up to 16GB MRs.
2. It changes page fault event format and refactor page faults logic
together with addition of atomic support.
3. It prepares mlx5 core code to support implicit registration with
simplified and relaxed semantics.
Implicit ODP semantics allows to applications provide special memory
key that represents their complete address space. Thus all IO accesses
referencing to this key (with proper access rights associated with the key)
wouldn't need not register any virtual address range.
Thanks,
Artemy, Ilya and Leon
v1->v2:
- Don't use 'inline' in .c files
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Artemy Kovalyov [Mon, 2 Jan 2017 09:37:48 +0000 (11:37 +0200)]
IB/mlx5: Improve MR check
Add "type" field to mlx5_core MKEY struct.
Check whether page fault happens on MKEY corresponding to MR.
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Artemy Kovalyov [Mon, 2 Jan 2017 09:37:47 +0000 (11:37 +0200)]
IB/mlx5: Add ODP atomics support
Handle ODP atomic operations. When initiator of RDMA atomic
operation use ODP MR to provide source data handle pagefault properly.
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Artemy Kovalyov [Mon, 2 Jan 2017 09:37:46 +0000 (11:37 +0200)]
{net,IB}/mlx5: Refactor page fault handling
* Update page fault event according to last specification.
* Separate code path for page fault EQ, completion EQ and async EQ.
* Move page fault handling work queue from mlx5_ib static variable
into mlx5_core page fault EQ.
* Allocate memory to store ODP event dynamically as the
events arrive, since in atomic context - use mempool.
* Make mlx5_ib page fault handler run in process context.
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Artemy Kovalyov [Mon, 2 Jan 2017 09:37:45 +0000 (11:37 +0200)]
net/mlx5: Update PAGE_FAULT_RESUME layout
Update PAGE_FAULT_RESUME command layout.
Three bit fields describing page fault: rdma, rdma_write, req_res gave 8
possible combinations, while only a few were legal. Now they
are interpreted as three-bit type field, where former legal
combinations turns into corresponding types and unused were added as new
types.
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Artemy Kovalyov [Mon, 2 Jan 2017 09:37:44 +0000 (11:37 +0200)]
IB/mlx5: Add MR cache for large UMR regions
In this change we turn mlx5_ib_update_mtt() into generic
mlx5_ib_update_xlt() to perfrom HCA translation table modifiactions
supporting both atomic and process contexts and not limited by number
of modified entries.
Using this function we increase preallocated MRs up to 16GB.
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Artemy Kovalyov [Mon, 2 Jan 2017 09:37:43 +0000 (11:37 +0200)]
IB/mlx5: Add support for big MRs
Make use of extended UMR translation offset.
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Artemy Kovalyov [Mon, 2 Jan 2017 09:37:42 +0000 (11:37 +0200)]
IB/mlx5: Refactor UMR post send format
* Update struct mlx5_wqe_umr_ctrl_seg.
* Currenlty UMR send_flags aim only certain use cases: enabled/disable
cached MR, modifying XLT for ODP. By making flags independent make UMR
more flexible allowing arbitrary manipulations.
* Since different UMR formats have different entry sizes UMR request
should receive exact size of translation table update instead of
number of entries. Rename field npages to xlt_size in struct mlx5_umr_wr
and update relevant code accordingly.
* Add support of length64 bit.
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Artemy Kovalyov [Mon, 2 Jan 2017 09:37:41 +0000 (11:37 +0200)]
net/mlx5: Support new MR features
This patch adds the following items to IFC file.
1. MLX5_MKC_ACCESS_MODE_KSM enum value for creating KSM memory keys.
KSM access mode used when indirect MKey associated with fixed memory
size entries.
2. null_mkey field that is used to indicate non-present KLM/KSM
entries, where it causes the device to generate page fault event
when trying to access it.
3. struct mlx5_ifc_cmd_hca_cap_bits capability bits indicating
related value/field is supported:
* fixed_buffer_size - MLX5_MKC_ACCESS_MODE_KSM
* umr_extended_translation_offset - translation_offset_42_16
in UMR ctrl segment
* null_mkey - null_mkey in QUERY_SPECIAL_CONTEXTS
Signed-off-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Binoy Jayan [Mon, 2 Jan 2017 09:37:40 +0000 (11:37 +0200)]
IB/mlx5: Add helper mlx5_ib_post_send_wait
Clean up the following common code (to post a list of work requests to the
send queue of the specified QP) at various places and add a helper function
'mlx5_ib_post_send_wait' to implement the same.
- Initialize 'mlx5_ib_umr_context' on stack
- Assign "mlx5_umr_wr:wr:wr_cqe to umr_context.cqe
- Acquire the semaphore
- call ib_post_send with a single ib_send_wr
- wait_for_completion()
- Check for umr_context.status
- Release the semaphore
Signed-off-by: Binoy Jayan <binoy.jayan@linaro.org> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Leon Romanovsky [Mon, 2 Jan 2017 09:37:39 +0000 (11:37 +0200)]
IB/mlx5: Reorder code in query device command
The order of features exposed by private mlx5-abi.h
file is CQE zipping, packet pacing and multi-packet WQE.
The internal order implemented in mlx5_ib_query_device() is
multi-packet WQE, CQE zipping and packet pacing.
Such difference hurts code readability, so let's sync,
while mlx5-abi.h (exposed to userspace) is the primary
order.
This commit doesn't change any functionality.
Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Max Gurtovoy [Mon, 2 Jan 2017 09:37:38 +0000 (11:37 +0200)]
net/mlx5: Fix offset naming for reserved fields in hca_cap_bits
Fix offset for reserved fields.
Fixes: 7486216b3a0b ("{net,IB}/mlx5: mlx5_ifc updates") Fixes: b4ff3a36d3e4 ("net/mlx5: Use offset based reserved field names in the IFC header file") Fixes: 7d5e14237a55 ("net/mlx5: Update mlx5_ifc hardware features") Signed-off-by: Max Gurtovoy <maxg@mellanox.com> Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 2 Jan 2017 20:23:34 +0000 (15:23 -0500)]
Merge tag 'wireless-drivers-next-for-davem-2017-01-02' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
wireless-drivers-next patches for 4.11
The most notable change here is the inclusion of airtime fairness
scheduling to ath9k. It prevents slow clients from hogging all the
airtime and unfairly slowing down faster clients.
For core revision 3.x Address-Aligned Beats is available in two registers.
The DT property snps,aal was created for AAL in the DMA bus register,
which is a read/write bit.
The DT property snps,axi_all was created for AXI_AAL in the AXI bus mode
register, which is a read only bit that reflects the value of AAL in the
DMA bus register.
Since the value of snps,axi_all is never used in the driver,
and since the property was created for a bit that is read only,
it should be safe to remove the property.
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: Niklas Cassel <niklas.cassel@axis.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Mon, 2 Jan 2017 02:02:21 +0000 (21:02 -0500)]
Merge branch 'qed-driver-updates'
Yuval Mintz says:
====================
qed*: Driver updates
The more interesting changes in this series include:
- Restructuring of the qede files - qede_main.c has grown big and this
series splits it into 3 parts [patches #2 and #3].
- Some significant changes in the API through which RSS indirection
table gets configured [#8].
- Support for ndo_set_vf_trust() [#9] which would regulate which VFs
are allowed to use promisc/multi-promisc mode.
It also contains various minor changes to qed/qede, as well as
non-functional changes [#1, #12] to complement other changes.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ram Amrani [Sun, 1 Jan 2017 11:57:10 +0000 (13:57 +0200)]
qed: Conserve RDMA resources when !QEDR
If qedr isn't part of the kernel then don't allocate RDMA resources
for it in qed.
Signed-off-by: Ram Amrani <Ram.Amrani@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Sun, 1 Jan 2017 11:57:07 +0000 (13:57 +0200)]
qed*: RSS indirection based on queue-handles
A step toward having qede agnostic to the queue configurations
in firmware/hardware - let the RSS indirections use queue handles
instead of actual queue indices.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Manish Chopra [Sun, 1 Jan 2017 11:57:05 +0000 (13:57 +0200)]
qede - mark SKB as encapsulated
When driver receives a recognized encapsulated packet it needs
to set the skb->encapsulation field as well.
Signed-off-by: Manish Chopra <Manish.Chopra@cavium.com> Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Sun, 1 Jan 2017 11:57:04 +0000 (13:57 +0200)]
qede: Postpone reallocation until NAPI end
During Rx flow driver allocates a replacement buffer each time
it consumes an Rx buffer. Failing to do so, it would consume the
currently processed buffer and re-post it on the ring.
As a result, the Rx ring is always completely full [from driver POV].
We now allow the Rx ring to shorten by doing the re-allocations
at the end of the NAPI run. The only limitation is that we still want to
make sure each time we reallocate that we'd still have sufficient
elements in the Rx ring to guarantee that FW would be able to post
additional data and trigger an interrupt.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Sun, 1 Jan 2017 11:57:03 +0000 (13:57 +0200)]
qed*: Change maximal number of queues
Today qede requests contexts that would suffice for 64 'whole'
combined queues [192 meant for 64 rx, tx and xdp tx queues],
but registers netdev and limits the number of queues based on
information received by qed. In turn, qed doesn't take context
into account when informing qede how many queues it can support.
This would lead to a configuration problem in case user tries
configuring >64 combined queues to interface [or >96 in case
xdp isn't enabled]. Since we don't have a mangement firware
that actually provides so many interrupt lines to a single
device we're currently safe but that's about to change soon.
The new maximum is hence changed:
- For RoCE devices, the limit would remain 64.
- For non-RoCE devices, the limit might be higher [depending
on the actual configuration of the device].
qed would start enforcing that limit in both scenarios.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Mintz, Yuval [Sun, 1 Jan 2017 11:57:00 +0000 (13:57 +0200)]
qed*: Update to dual-license
Since the submission of the qedr driver, there's inconsistency
in the licensing of the various qed/qede files - some are GPLv2
and some are dual-license.
Since qedr requires dual-license and it's dependent on both,
we're updating the licensing of all qed/qede source files.
Signed-off-by: Yuval Mintz <Yuval.Mintz@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Preisner [Fri, 30 Dec 2016 02:37:54 +0000 (03:37 +0100)]
net: 3com: typhoon: typhoon_init_one: make return values more specific
In some cases the return value of a failing function is not being used
and the function typhoon_init_one() returns another negative error code
instead.
Signed-off-by: Thomas Preisner <thomas.preisner+linux@fau.de> Signed-off-by: Milan Stephan <milan.stephan+linux@fau.de> Signed-off-by: David S. Miller <davem@davemloft.net>
In a few cases the err-variable is not set to a negative error code if a
function call in typhoon_init_one() fails and thus 0 is returned
instead.
It may be better to set err to the appropriate negative error
code before returning.
Reported-by: Pan Bian <bianpan2016@163.com> Signed-off-by: Thomas Preisner <thomas.preisner+linux@fau.de> Signed-off-by: Milan Stephan <milan.stephan+linux@fau.de> Signed-off-by: David S. Miller <davem@davemloft.net>
Relax the check in setsockopt to allow setting mc_index to an L3 slave if
sk_bound_dev_if points to an L3 master.
Make a similar change for IPv6. In this case change the device lookup to
take the rcu_read_lock avoiding a refcnt. The rcu lock is also needed for
the lookup of a potential L3 master device.
This really only silences a setsockopt failure since uses of mc_index are
secondary to sk_bound_dev_if if it is set. In both cases, if either index
is an L3 slave or master, lookups are directed to the same FIB table so
relaxing the check at setsockopt time causes no harm.
Patch is based on a suggested change by Darwin for a problem noted in
their code base.
Suggested-by: Darwin Dingel <darwin.dingel@alliedtelesis.co.nz> Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Fri, 23 Dec 2016 00:43:22 +0000 (00:43 +0000)]
brcmfmac: fix spelling mistakes on "Ivalid"
Trivial fixes to spelling mistake "Ivalid" to "Invalid" in
brcmf_err error messages.
Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
trivial fix to spelling mistake in RT_TRACE message
Signed-off-by: Colin Ian King <colin.king@canonical.com> Acked-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Ping-Ke Shih [Wed, 28 Dec 2016 21:40:04 +0000 (15:40 -0600)]
rtlwifi: Fix alignment issues
The addresses of Wlan NIC registers are natural alignment, but some
drivers have bugs. These are evident on platforms that need natural
alignment to access registers. This change contains the following:
1. Function _rtl8821ae_dbi_read() is used to read one byte from DBI,
thus it should use rtl_read_byte().
2. Register 0x4C7 of 8192ee is single byte.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Stable <stable@vger.kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Bhumika Goyal [Sat, 17 Dec 2016 22:57:24 +0000 (04:27 +0530)]
libertas: constify cfg80211_ops structures
cfg80211_ops structures are only passed as an argument to the function
wiphy_new. This argument is of type const, so cfg80211_ops strutures
having this property can be declared as const.
Done using Coccinelle
Larry Finger [Thu, 15 Dec 2016 18:23:10 +0000 (12:23 -0600)]
rtlwifi: Remove some redundant code
The symbol DBG_EMERG is no longer used and is removed.
In a number of places, the code has redundant messages. For example, if
the failure for the firmware to run is logged, it is not necessary to
log that the firmware has been started. In addition, extraneous braces are
removed.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Larry Finger [Thu, 15 Dec 2016 18:23:09 +0000 (12:23 -0600)]
rtlwifi: rtl8188ee: Remove all instances of DBG_EMERG
This is a step toward eliminating the RT_TRACE macros. Those calls that
have DBG_EMERG as the level are always logged, and they represent error
conditions, thus they are replaced with pr_err().
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Larry Finger [Thu, 15 Dec 2016 18:23:08 +0000 (12:23 -0600)]
rtlwifi: rtl8192c-common: Remove all instances of DBG_EMERG
This is a step toward eliminating the RT_TRACE macros. Those calls that
have DBG_EMERG as the level are always logged, and they represent error
conditions, thus they are replaced with pr_err().
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Larry Finger [Thu, 15 Dec 2016 18:23:07 +0000 (12:23 -0600)]
rtlwifi: rtl8192ce: Remove all instances of DBG_EMERG
This is a step toward eliminating the RT_TRACE macros. Those calls that
have DBG_EMERG as the level are always logged, and they represent error
conditions, thus they are replaced with pr_err().
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Larry Finger [Thu, 15 Dec 2016 18:23:06 +0000 (12:23 -0600)]
rtlwifi: rtl8192cu: Remove all instances of DBG_EMERG
This is a step toward eliminating the RT_TRACE macros. Those calls that
have DBG_EMERG as the level are always logged, and they represent error
conditions, thus they are replaced with pr_err().
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Larry Finger [Thu, 15 Dec 2016 18:23:05 +0000 (12:23 -0600)]
rtlwifi: rtl8192de: Remove all instances of DBG_EMERG
This is a step toward eliminating the RT_TRACE macros. Those calls that
have DBG_EMERG as the level are always logged, and they represent error
conditions, thus they are replaced with pr_err().
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Larry Finger [Thu, 15 Dec 2016 18:23:04 +0000 (12:23 -0600)]
rtlwifi: rtl8192se: Remove all instances of DBG_EMERG
This is a step toward eliminating the RT_TRACE macros. Those calls that
have DBG_EMERG as the level are always logged, and they represent error
conditions, thus they are replaced with pr_err().
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Larry Finger [Thu, 15 Dec 2016 18:23:03 +0000 (12:23 -0600)]
rtlwifi: rtl8723-common: Remove all instances of DBG_EMERG
This is a step toward eliminating the RT_TRACE macros. Those calls that
have DBG_EMERG as the level are always logged, and they represent error
conditions, thus they are replaced with pr_err().
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Larry Finger [Thu, 15 Dec 2016 18:23:02 +0000 (12:23 -0600)]
rtlwifi: rtl8192ee: Remove all instances of DBG_EMERG
This is a step toward eliminating the RT_TRACE macros. Those calls that
have DBG_EMERG as the level are always logged, and they represent error
conditions, thus they are replaced with pr_err().
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Larry Finger [Thu, 15 Dec 2016 18:23:01 +0000 (12:23 -0600)]
rtlwifi: rtl8723ae: Remove all instances of DBG_EMERG
This is a step toward eliminating the RT_TRACE macros. Those calls that
have DBG_EMERG as the level are always logged, and they represent error
conditions, thus they are replaced with pr_err().
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Larry Finger [Thu, 15 Dec 2016 18:23:00 +0000 (12:23 -0600)]
rtlwifi: rtl8723be: Remove all instances of DBG_EMERG
This is a step toward eliminating the RT_TRACE macros. Those calls that
have DBG_EMERG as the level are always logged, and they represent error
conditions, thus they are replaced with pr_err().
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Larry Finger [Thu, 15 Dec 2016 18:22:59 +0000 (12:22 -0600)]
rtlwifi: rtl8821ae: Remove all instances of DBG_EMERG
This is a step toward eliminating the RT_TRACE macros. Those calls that
have DBG_EMERG as the level are always logged, and they represent error
conditions, thus they are replaced with pr_err().
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Cc: Ping-Ke Shih <pkshih@realtek.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
rt2800: replace msleep() with usleep_range() on channel switch
msleep(1) can sleep much more time then requested 1ms, this is not good
on channel switch, which we want to be performed fast (i.e. to make scan
faster). Replace msleep() with usleep_range(), which has much smaller
maximum sleeping time boundary.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
We need to perform different actions (AGC and VCO calibrations and VGC
tuning) periodically at different intervals. We don't need separate
works for those, we can use link tuner work and just check for proper
interval on it.
This fixes performing AGC and VCO calibration when scanning on STA
mode. We need to be on-channel to perform those calibrations.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
rt2800: set MAX_PSDU len according to remote STAs capabilities
MAX_LEN_CFG_MAX_PSDU specify maximum transmitted by HW AMPDU length
(0 - 8kB, 1 - 16kB, 2 - 32kB, 3 - 64kB). Set this option according to
remote stations capabilities (based on HT ampdu_factor). However limit
the value based our hardware TX capabilities as some chips can not send
more than 16kB (factor 1). Limit for all chips is currently 32kB
(factor 2), but perhaps for some chips this could be increased
to 64kB by setting drv_data->max_psdu to 3.
Since MAX_LEN_CFG_MAX_PSDU is global setting, on multi stations modes
(AP, IBSS, mesh) we limit according to less capable remote STA. We can
not set bigger value to speed up communication with some stations and
do not break communication with slow stations.
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
orinoco: Use shash instead of ahash for MIC calculations
Eric Biggers pointed out that the orinoco driver pointed scatterlists
at the stack.
Fix it by switching from ahash to shash. The result should be
simpler, faster, and more correct.
Cc: stable@vger.kernel.org # 4.9 only Reported-by: Eric Biggers <ebiggers3@gmail.com> Signed-off-by: Andy Lutomirski <luto@kernel.org> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>