virtio: add help to CONFIG_VIRTIO option.
Trying to enable a virtio driver (eg CONFIG_VIRTIO_BLK) is painful
because it depends on CONFIG_VIRTIO. CONFIG_VIRTIO doesn't tell you
how to turn it on (it's selected from anything which provides a virtio
bus).
This patch at least adds some documentation, visible in menuconfig, as
a hint.
Reported-by: Kent Overstreet <koverstreet@google.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
virtio_balloon: not EXPERIMENTAL any more.
It is not experimental in any vaguely-sane sense.
Reported-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
virtio-blk: Add bio-based IO path for virtio-blk
This patch introduces bio-based IO path for virtio-blk.
Compared to request-based IO path, bio-based IO path uses driver
provided ->make_request_fn() method to bypasses the IO scheduler. It
handles the bio to device directly without allocating a request in block
layer. This reduces the IO path in guest kernel to achieve high IOPS
and lower latency. The downside is that guest can not use the IO
scheduler to merge and sort requests. However, this is not a big problem
if the backend disk in host side uses faster disk device.
When the bio-based IO path is not enabled, virtio-blk still uses the
original request-based IO path, no performance difference is observed.
Using a slow device e.g. normal SATA disk, the bio-based IO path for
sequential read and write are slower than req-based IO path due to lack
of merge in guest kernel. So we make the bio-based path optional.
Performance evaluation:
-----------------------------
1) Fio test is performed in a 8 vcpu guest with ramdisk based guest using
kvm tool.
Short version:
With bio-based IO path, sequential read/write, random read/write
IOPS boost : 28%, 24%, 21%, 16%
Latency improvement: 32%, 17%, 21%, 16%
Long version:
With bio-based IO path:
seq-read : io=2048.0MB, bw=116996KB/s, iops=233991 , runt= 17925msec
seq-write : io=2048.0MB, bw=100829KB/s, iops=201658 , runt= 20799msec
rand-read : io=3095.7MB, bw=112134KB/s, iops=224268 , runt= 28269msec
rand-write: io=3095.7MB, bw=96198KB/s, iops=192396 , runt= 32952msec
clat (usec): min=0 , max=2631.6K, avg=58716.99, stdev=191377.30
clat (usec): min=0 , max=1753.2K, avg=66423.25, stdev=81774.35
clat (usec): min=0 , max=2915.5K, avg=61685.70, stdev=120598.39
clat (usec): min=0 , max=1933.4K, avg=76935.12, stdev=96603.45
cpu : usr=74.08%, sys=703.84%, ctx=
29661403, majf=21354, minf=
22460954
cpu : usr=70.92%, sys=702.81%, ctx=
77219828, majf=13980, minf=
27713137
cpu : usr=72.23%, sys=695.37%, ctx=
88081059, majf=18475, minf=
28177648
cpu : usr=69.69%, sys=654.13%, ctx=
145476035, majf=15867, minf=
26176375
With request-based IO path:
seq-read : io=2048.0MB, bw=91074KB/s, iops=182147 , runt= 23027msec
seq-write : io=2048.0MB, bw=80725KB/s, iops=161449 , runt= 25979msec
rand-read : io=3095.7MB, bw=92106KB/s, iops=184211 , runt= 34416msec
rand-write: io=3095.7MB, bw=82815KB/s, iops=165630 , runt= 38277msec
clat (usec): min=0 , max=1932.4K, avg=77824.17, stdev=170339.49
clat (usec): min=0 , max=2510.2K, avg=78023.96, stdev=146949.15
clat (usec): min=0 , max=3037.2K, avg=74746.53, stdev=128498.27
clat (usec): min=0 , max=1363.4K, avg=89830.75, stdev=114279.68
cpu : usr=53.28%, sys=724.19%, ctx=
37988895, majf=17531, minf=
23577622
cpu : usr=49.03%, sys=633.20%, ctx=
205935380, majf=18197, minf=
27288959
cpu : usr=55.78%, sys=722.40%, ctx=
101525058, majf=19273, minf=
28067082
cpu : usr=56.55%, sys=690.83%, ctx=
228205022, majf=18039, minf=
26551985
2) Fio test is performed in a 8 vcpu guest with Fusion-IO based guest using
kvm tool.
Short version:
With bio-based IO path, sequential read/write, random read/write
IOPS boost : 11%, 11%, 13%, 10%
Latency improvement: 10%, 10%, 12%, 10%
Long Version:
With bio-based IO path:
read : io=2048.0MB, bw=58920KB/s, iops=117840 , runt= 35593msec
write: io=2048.0MB, bw=64308KB/s, iops=128616 , runt= 32611msec
read : io=3095.7MB, bw=59633KB/s, iops=119266 , runt= 53157msec
write: io=3095.7MB, bw=62993KB/s, iops=125985 , runt= 50322msec
clat (usec): min=0 , max=1284.3K, avg=128109.01, stdev=71513.29
clat (usec): min=94 , max=962339 , avg=116832.95, stdev=65836.80
clat (usec): min=0 , max=1846.6K, avg=128509.99, stdev=89575.07
clat (usec): min=0 , max=2256.4K, avg=121361.84, stdev=82747.25
cpu : usr=56.79%, sys=421.70%, ctx=
147335118, majf=21080, minf=
19852517
cpu : usr=61.81%, sys=455.53%, ctx=
143269950, majf=16027, minf=
24800604
cpu : usr=63.10%, sys=455.38%, ctx=
178373538, majf=16958, minf=
24822612
cpu : usr=62.04%, sys=453.58%, ctx=
226902362, majf=16089, minf=
23278105
With request-based IO path:
read : io=2048.0MB, bw=52896KB/s, iops=105791 , runt= 39647msec
write: io=2048.0MB, bw=57856KB/s, iops=115711 , runt= 36248msec
read : io=3095.7MB, bw=52387KB/s, iops=104773 , runt= 60510msec
write: io=3095.7MB, bw=57310KB/s, iops=114619 , runt= 55312msec
clat (usec): min=0 , max=1532.6K, avg=142085.62, stdev=109196.84
clat (usec): min=0 , max=1487.4K, avg=129110.71, stdev=114973.64
clat (usec): min=0 , max=1388.6K, avg=145049.22, stdev=107232.55
clat (usec): min=0 , max=1465.9K, avg=133585.67, stdev=110322.95
cpu : usr=44.08%, sys=590.71%, ctx=
451812322, majf=14841, minf=
17648641
cpu : usr=48.73%, sys=610.78%, ctx=
418953997, majf=22164, minf=
26850689
cpu : usr=45.58%, sys=581.16%, ctx=
714079216, majf=21497, minf=
22558223
cpu : usr=48.40%, sys=599.65%, ctx=
656089423, majf=16393, minf=
23824409
3) Fio test is performed in a 8 vcpu guest with normal SATA based guest
using kvm tool.
Short version:
With bio-based IO path, sequential read/write, random read/write
IOPS boost : -10%, -10%, 4.4%, 0.5%
Latency improvement: -12%, -15%, 2.5%, 0.8%
Long Version:
With bio-based IO path:
read : io=124812KB, bw=36537KB/s, iops=9060 , runt= 3416msec
write: io=169180KB, bw=24406KB/s, iops=6065 , runt= 6932msec
read : io=256200KB, bw=2089.3KB/s, iops=520 , runt=122630msec
write: io=257988KB, bw=1545.7KB/s, iops=384 , runt=166910msec
clat (msec): min=1 , max=1527 , avg=28.06, stdev=89.54
clat (msec): min=2 , max=344 , avg=41.12, stdev=38.70
clat (msec): min=8 , max=1984 , avg=490.63, stdev=207.28
clat (msec): min=33 , max=4131 , avg=659.19, stdev=304.71
cpu : usr=4.85%, sys=17.15%, ctx=31593, majf=0, minf=7
cpu : usr=3.04%, sys=11.45%, ctx=39377, majf=0, minf=0
cpu : usr=0.47%, sys=1.59%, ctx=262986, majf=0, minf=16
cpu : usr=0.47%, sys=1.46%, ctx=337410, majf=0, minf=0
With request-based IO path:
read : io=150120KB, bw=40420KB/s, iops=10037 , runt= 3714msec
write: io=194932KB, bw=27029KB/s, iops=6722 , runt= 7212msec
read : io=257136KB, bw=2001.1KB/s, iops=498 , runt=128443msec
write: io=258276KB, bw=1537.2KB/s, iops=382 , runt=168028msec
clat (msec): min=1 , max=1542 , avg=24.84, stdev=32.45
clat (msec): min=3 , max=628 , avg=35.62, stdev=39.71
clat (msec): min=8 , max=2540 , avg=503.28, stdev=236.97
clat (msec): min=41 , max=4398 , avg=653.88, stdev=302.61
cpu : usr=3.91%, sys=15.75%, ctx=26968, majf=0, minf=23
cpu : usr=2.50%, sys=10.56%, ctx=19090, majf=0, minf=0
cpu : usr=0.16%, sys=0.43%, ctx=20159, majf=0, minf=16
cpu : usr=0.18%, sys=0.53%, ctx=81364, majf=0, minf=0
How to use:
-----------------------------
Add 'virtio_blk.use_bio=1' to kernel cmdline or 'modprobe virtio_blk
use_bio=1' to enable ->make_request_fn() based I/O path.
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Tejun Heo <tj@kernel.org>
Cc: Shaohua Li <shli@kernel.org>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: virtualization@lists.linux-foundation.org
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Asias He <asias@redhat.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
projects / karo-tx-linux.git / log