Arve Hjønnevåg [Tue, 16 Oct 2012 22:29:53 +0000 (15:29 -0700)]
Staging: android: binder: Add some tracepoints
Add tracepoints:
- ioctl entry and exit
- Main binder lock: lock, locked and unlock
- Command and return buffer opcodes
- Transaction: create and receive
- Transaction buffer: create and free
- Object and file descriptor transfer
- binder_update_page_range
YAMANE Toshiaki [Tue, 9 Oct 2012 13:07:27 +0000 (22:07 +0900)]
staging/comedi: Use pr_ or dev_ printks in drivers/dt9812.c
fixed below checkpatch warnings.
- WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ...
- WARNING: Prefer netdev_info(netdev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ...
YAMANE Toshiaki [Mon, 8 Oct 2012 12:26:33 +0000 (21:26 +0900)]
staging/comedi: Use dev_ printks in drivers/ii_pci20kc.c
fixed below checkpatch warnings.
- WARNING: Prefer netdev_warn(netdev, ... then dev_warn(dev, ... then pr_warn(... to printk(KERN_WARNING ...
- WARNING: Prefer netdev_info(netdev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ...
YAMANE Toshiaki [Sat, 6 Oct 2012 05:52:34 +0000 (14:52 +0900)]
staging/comedi: Use dev_ printks in drivers/quatech_daqp_cs.c
fixed below checkpatch warnings.
- WARNING: Prefer netdev_info(netdev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ...
- WARNING: Prefer netdev_warn(netdev, ... then dev_warn(dev, ... then pr_warn(... to printk(KERN_WARNING ...
- WARNING: Prefer netdev_err(netdev, ... then dev_err(dev, ... then pr_err(... to printk(KERN_ERR ...
- WARNING: Prefer netdev_info(netdev, ... then dev_info(dev, ... then pr_info(... to printk(KERN_INFO ...
- WARNING: Prefer netdev_notice(netdev, ... then dev_notice(dev, ... then pr_notice(... to printk(KERN_NOTICE ...
Ian Abbott [Mon, 15 Oct 2012 12:07:32 +0000 (13:07 +0100)]
staging: comedi: always set hw_dev during auto-config
Auto-configuration (auto-attachment) of USB and PCI comedi devices all
goes through `comedi_auto_config_helper()`. That is a good place to set
the comedi device's `hw_dev` pointer to the hardware `struct device` via
a call to `comedi_set_hw_dev(comedi_device, hardware_device)` as it may
obviate the need for the low-level comedi driver to make this call.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The remaining comedi drivers that still have a devpriv macro
are all pretty straight forward for removing the devpriv
macro.
This macro relies on a local variable having a specific name.
Remove its use by replacing it with a local variable where
used.
The inline function alloc_private(), used to kzalloc the
dev->private memory, returns non-zero if there is an error.
Fix all the alloc_private() calls accordingly and remove any
kernel messages or obvious comments that still exist in the
drivers. Leave a comment in the skel driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ni_mio_common.c file is #include'd by the ni_atmio, ni_mio_cs,
and ni_pcimio drivers. Those drivers all have a devpriv macro of
this type:
This macro relies on a local variable having a specific name.
Remove its use in all the files by replacing it with a local
variable.
Some of the functions in ni_mio_common.c don't always use the
devpriv variable due to differences in how the low-level i/o
is handled by the driver. Tag the variable in those functions
with __maybe_unused to avoid compile warnings.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver only supports a single "boardtype". Remove the unneeded
boardinfo struct and its use in the driver. Change the "driver_name"
to match what the boardinfo supplied.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Dan Carpenter [Tue, 2 Oct 2012 08:26:04 +0000 (11:26 +0300)]
staging: rtl8192u: fix a macro expansion bug
Clang detected this macro expansion bug:
drivers/staging/rtl8192u/r8192U_core.c:2384:76: warning: operator '?:'
has lower precedence than '+'; '+' will be evaluated first
[-Wparentheses]
The line from the .c file looks like this:
u1bAIFS = qos_parameters->aifs[i] * ((mode&(IEEE_G|IEEE_N_24G)) ?9:20) + aSifsTime;
We need to put parenthesis around the entire macro to fix the bug.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andres Salomon [Mon, 1 Oct 2012 21:46:11 +0000 (14:46 -0700)]
staging/olpc_dcon: drop pin frobbing code for xo1.5
This code looks in the PCI config space for pin addresses and sets up some
stuff. However, Openfirmware has already done this for us, so there's no
need to ever do it in Linux. According to Mitch Bradley, this OFW has been
doing this for us since at least B3 builds (pre-mass production).
Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andres Salomon [Mon, 1 Oct 2012 21:46:01 +0000 (14:46 -0700)]
staging/olpc_dcon: drop fb_notifier code
Previously we registered a notifier block to inform us of any framebuffer
device changes; if the screen was blanked or unblanked, we'd put the DCON
to sleep or wake it up.
Turns out that the backlight code registers a notifier block as well
and calls the update_status hook, so we can just use that to put the DCON
to sleep. For those status updates where the blanking isn't changed,
dcon_sleep will do nothing.
Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andres Salomon [Mon, 1 Oct 2012 21:45:50 +0000 (14:45 -0700)]
staging/olpc_dcon: move wait queue into dcon_priv struct
Another global variable (dcon_wait_queue) moved into the dcon_priv struct.
In the process, replace an instance of a manually implemented
wait_event_timeout. This code came from Jordan's original gxfb_dcon.c
driver waaaay back in 2006; well past time for a replacement.
Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Andres Salomon [Mon, 1 Oct 2012 21:45:37 +0000 (14:45 -0700)]
staging/olpc_dcon: drop useaa module arg
The 'useaa' module parameter was a workaround for a buggy DCON prototype
not supporting the optional anti-aliasing mode properly. There's no
reason to disable it any more, so drop the option.
Signed-off-by: Andres Salomon <dilinger@queued.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kevin McKinney [Fri, 19 Oct 2012 02:40:15 +0000 (22:40 -0400)]
Staging: bcm: Reverse condition in if statement in Misc.c
This patch reverses the condition in two if
statements in CopyBufferToControlPacket to
place Adapter->bShutStatus and
Adapter->idleMode to the left of the equal
"==" sign, and TRUE to the right of
the equal "==" sign. This was done for
readability purposes.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kevin McKinney [Fri, 19 Oct 2012 02:40:14 +0000 (22:40 -0400)]
Staging: bcm: Clean up function CopyBufferToControlPacket in Misc.c
This patch cleans up the code in function
CopyBufferToControlPacket. Several things are
being done here: (1) remove the null
initialization from variable cntrl_buff, (2)
reverse the if statement to check if cntrl_buff
is null; if so, then write debug statement and
return -ENOMEM error code, and (3) indent the
code properly.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kevin McKinney [Sat, 13 Oct 2012 03:49:36 +0000 (23:49 -0400)]
Staging: bcm: Remove unneeded do while loop in InterfaceWRM.
This patch removes an unneeded do while loop which
sends a control message to bcm usb device. In this case,
the loop executes once because usRetries is
initialized to zero. After the first iteration
this variable will be 1. Therefore, the statement:
"usRetries < MAX_RDM_WRM_RETIRES" will evaluate to
false causing the do while statement to execute
once because MAX_RDM_WRM_RETIRES is equal to 1.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kevin McKinney [Sat, 13 Oct 2012 03:49:35 +0000 (23:49 -0400)]
Staging: bcm: Remove unneeded do while loop in InterfaceRDM.
This patch removes an unneeded do while loop which
sends a control message to bcm usb device. In this case,
the loop executes once because usRetries is
initialized to zero. After the first iteration
this variable will be 1. Therefore, the statement:
"usRetries < MAX_RDM_WRM_RETIRES" will evaluate to
false causing the do while statement to execute
once because MAX_RDM_WRM_RETIRES is equal to 1.
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Kevin McKinney [Sat, 13 Oct 2012 03:49:33 +0000 (23:49 -0400)]
Staging: bcm: Change the style of comparing structures to null in InterfaceMisc.c.
This patch changes the style of comparing
structures to null. Instead of this:
"if (foo == NULL) {" or "if (foo != NULL) {",
the new logic uses: "if (!foo) {" or
"if (foo) {".
Signed-off-by: Kevin McKinney <klmckinney1@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Now that we have the infrastructure to use the regular function in place
and all existing users are converted, remove the map and unmap callbacks
from the ipack_bus_device->ops.
Previously the *_phys fields were of type ipack_addr_space, which use
void pointers to refer to memory addresses. Since the *_phys fields
refer to unmapped memory, this is not correct. Introduce a new struct
ipack_region (which uses phys_addr_t to refer to the start of a region)
and use that as a replacement for struct ipack_addr_space.
struct ipack_region is defined in ipack.h because it is planned to later
expose the physical addressed to the IPack Module drivers.
Staging: ipack: Make ipack_device_register() analogous to device_register().
ipack_device_register() is no longer creating the struct ipack_device
but only registering it. Instead of releasing memory directly the new
ipack_device->release callback is called.
Linus Torvalds [Sun, 14 Oct 2012 21:39:05 +0000 (14:39 -0700)]
Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS update from Ralf Baechle:
"Cleanups and fixes for breakage that occured earlier during this merge
phase. Also a few patches that didn't make the first pull request.
Of those is the Alchemy work that merges code for many of the SOCs and
evaluation boards thus among other code shrinkage, reduces the number
of MIPS defconfigs by 5."
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (22 commits)
MIPS: SNI: Switch RM400 serial to SCCNXP driver
MIPS: Remove unused empty_bad_pmd_table[] declaration.
MIPS: MT: Remove kspd.
MIPS: Malta: Fix section mismatch.
MIPS: asm-offset.c: Delete unused irq_cpustat_t struct offsets.
MIPS: Alchemy: Merge PB1100/1500 support into DB1000 code.
MIPS: Alchemy: merge PB1550 support into DB1550 code
MIPS: Alchemy: Single kernel for DB1200/1300/1550
MIPS: Optimize TLB refill for RI/XI configurations.
MIPS: proc: Cleanup printing of ASEs.
MIPS: Hardwire detection of DSP ASE Rev 2 for systems, as required.
MIPS: Add detection of DSP ASE Revision 2.
MIPS: Optimize pgd_init and pmd_init
MIPS: perf: Add perf functionality for BMIPS5000
MIPS: perf: Split the Kconfig option CONFIG_MIPS_MT_SMP
MIPS: perf: Remove unnecessary #ifdef
MIPS: perf: Add cpu feature bit for PCI (performance counter interrupt)
MIPS: perf: Change the "mips_perf_event" table unsupported indicator.
MIPS: Align swapper_pg_dir to 64K for better TLB Refill code.
vmlinux.lds.h: Allow architectures to add sections to the front of .bss
...
Linus Torvalds [Sun, 14 Oct 2012 20:39:34 +0000 (13:39 -0700)]
Merge branch 'modules-next' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux
Pull module signing support from Rusty Russell:
"module signing is the highlight, but it's an all-over David Howells frenzy..."
Hmm "Magrathea: Glacier signing key". Somebody has been reading too much HHGTTG.
* 'modules-next' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux: (37 commits)
X.509: Fix indefinite length element skip error handling
X.509: Convert some printk calls to pr_devel
asymmetric keys: fix printk format warning
MODSIGN: Fix 32-bit overflow in X.509 certificate validity date checking
MODSIGN: Make mrproper should remove generated files.
MODSIGN: Use utf8 strings in signer's name in autogenerated X.509 certs
MODSIGN: Use the same digest for the autogen key sig as for the module sig
MODSIGN: Sign modules during the build process
MODSIGN: Provide a script for generating a key ID from an X.509 cert
MODSIGN: Implement module signature checking
MODSIGN: Provide module signing public keys to the kernel
MODSIGN: Automatically generate module signing keys if missing
MODSIGN: Provide Kconfig options
MODSIGN: Provide gitignore and make clean rules for extra files
MODSIGN: Add FIPS policy
module: signature checking hook
X.509: Add a crypto key parser for binary (DER) X.509 certificates
MPILIB: Provide a function to read raw data into an MPI
X.509: Add an ASN.1 decoder
X.509: Add simple ASN.1 grammar compiler
...
Matt Fleming [Fri, 12 Oct 2012 10:19:59 +0000 (11:19 +0100)]
x86, boot: Explicitly include autoconf.h for hostprogs
The hostprogs need access to the CONFIG_* symbols found in
include/generated/autoconf.h. But commit abbf1590de22 ("UAPI: Partition
the header include path sets and add uapi/ header directories") replaced
$(LINUXINCLUDE) with $(USERINCLUDE) which doesn't contain the necessary
include paths.
This has the undesirable effect of breaking the EFI boot stub because
the #ifdef CONFIG_EFI_STUB code in arch/x86/boot/tools/build.c is
never compiled.
It should also be noted that because $(USERINCLUDE) isn't exported by
the top-level Makefile it's actually empty in arch/x86/boot/Makefile.
Cc: H. Peter Anvin <hpa@zytor.com> Cc: Ingo Molnar <mingo@kernel.org> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Matt Fleming <matt.fleming@intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Sun, 14 Oct 2012 00:18:53 +0000 (17:18 -0700)]
Merge branch 'late-for-linus' of git://git.linaro.org/people/rmk/linux-arm
Pull ARM update from Russell King:
"This is the final round of stuff for ARM, left until the end of the
merge window to reduce the number of conflicts. This set contains the
ARM part of David Howells UAPI changes, and a fix to the ordering of
'select' statements in ARM Kconfig files (see the appropriate commit
for why this happened - thanks to Andrew Morton for pointing out the
problem.)
I've left this as long as I dare for this window to avoid conflicts,
and I regenerated the config patch yesterday, posting it to our
mailing list for review and testing. I have several acks which
include successful test reports for it.
However, today I notice we've got new conflicts with previously unseen
code... though that conflict should be trivial (it's my changes vs a
one liner.)"
* 'late-for-linus' of git://git.linaro.org/people/rmk/linux-arm:
ARM: config: make sure that platforms are ordered by option string
ARM: config: sort select statements alphanumerically
UAPI: (Scripted) Disintegrate arch/arm/include/asm
Fix up fairly conflict in arch/arm/Kconfig (the select re-organization
vs recent addition of GENERIC_KERNEL_EXECVE)
Linus Torvalds [Sat, 13 Oct 2012 20:28:32 +0000 (13:28 -0700)]
Merge tag 'disintegrate-main-20121013' of git://git.infradead.org/users/dhowells/linux-headers
Pull UAPI disintegration for include/linux/{,byteorder/}*.h from David Howells:
"The patches contained herein do the following:
(1) Remove kernel-only stuff in linux/ppp-comp.h from the UAPI. I checked
this with Paul Mackerras before I created the patch and he suggested some
extra bits to unexport.
(2) Remove linux/blk_types.h entirely from the UAPI as none of it is userspace
applicable, and remove from the UAPI that part of linux/fs.h that was the
reason for linux/blk_types.h being exported in the first place. I
discussed this with Jens Axboe before creating the patch.
(3) The big patch of the series to disintegrate include/linux/*.h as a unit.
This could be split up, though there would be collisions in moving stuff
between the two Kbuild files when the parts are merged as that file is
sorted alphabetically rather than being grouped by subsystem.
Of this set of headers, 17 files have changed in the UAPI exported region
since the 4th and only 8 since the 9th so there isn't much change in this
area - as one might expect.
It should be pretty obvious and straightforward if it does come to fixing
up: stuff in __KERNEL__ guards stays where it is and stuff outside moves
to the same file in the include/uapi/linux/ directory.
If a new file appears then things get a bit more complicated as the
"headers +=" line has to move to include/uapi/linux/Kbuild. Only one new
file has appeared since the 9th and I judge this type of event relatively
unlikely.
(4) A patch to disintegrate include/linux/byteorder/*.h as a unit.
Signed-off-by: David Howells <dhowells@redhat.com>"
* tag 'disintegrate-main-20121013' of git://git.infradead.org/users/dhowells/linux-headers:
UAPI: (Scripted) Disintegrate include/linux/byteorder
UAPI: (Scripted) Disintegrate include/linux
UAPI: Unexport linux/blk_types.h
UAPI: Unexport part of linux/ppp-comp.h
Linus Torvalds [Sat, 13 Oct 2012 20:26:39 +0000 (13:26 -0700)]
Merge tag 'disintegrate-spi-20121009' of git://git.infradead.org/users/dhowells/linux-headers
Pull spi UAPI disintegration from David Howells:
"This is to complete part of the Userspace API (UAPI) disintegration
for which the preparatory patches were pulled recently. After these
patches, userspace headers will be segregated into:
include/uapi/linux/.../foo.h
for the userspace interface stuff, and:
include/linux/.../foo.h
for the strictly kernel internal stuff.
Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Grant Likely <grant.likely@secretlab.ca>"
* tag 'disintegrate-spi-20121009' of git://git.infradead.org/users/dhowells/linux-headers:
UAPI: (Scripted) Disintegrate include/linux/spi
Linus Torvalds [Sat, 13 Oct 2012 20:23:39 +0000 (13:23 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull user namespace compile fixes from Eric W Biederman:
"This tree contains three trivial fixes. One compiler warning, one
thinko fix, and one build fix"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
btrfs: Fix compilation with user namespace support enabled
userns: Fix posix_acl_file_xattr_userns gid conversion
userns: Properly print bluetooth socket uids
Linus Torvalds [Sat, 13 Oct 2012 20:22:01 +0000 (13:22 -0700)]
Merge tag 'md-3.7' of git://neil.brown.name/md
Pull md updates from NeilBrown:
- "discard" support, some dm-raid improvements and other assorted bits
and pieces.
* tag 'md-3.7' of git://neil.brown.name/md: (29 commits)
md: refine reporting of resync/reshape delays.
md/raid5: be careful not to resize_stripes too big.
md: make sure manual changes to recovery checkpoint are saved.
md/raid10: use correct limit variable
md: writing to sync_action should clear the read-auto state.
Subject: [PATCH] md:change resync_mismatches to atomic64_t to avoid races
md/raid5: make sure to_read and to_write never go negative.
md: When RAID5 is dirty, force reconstruct-write instead of read-modify-write.
md/raid5: protect debug message against NULL derefernce.
md/raid5: add some missing locking in handle_failed_stripe.
MD: raid5 avoid unnecessary zero page for trim
MD: raid5 trim support
md/bitmap:Don't use IS_ERR to judge alloc_page().
md/raid1: Don't release reference to device while handling read error.
raid: replace list_for_each_continue_rcu with new interface
add further __init annotations to crypto/xor.c
DM RAID: Fix for "sync" directive ineffectiveness
DM RAID: Fix comparison of index and quantity for "rebuild" parameter
DM RAID: Add rebuild capability for RAID10
DM RAID: Move 'rebuild' checking code to its own function
...
Russell King [Fri, 12 Oct 2012 13:20:52 +0000 (14:20 +0100)]
ARM: config: make sure that platforms are ordered by option string
The large platform selection choice should be sorted by option string
so it's easy to find the platform you're looking for. Fix the few
options which are out of this order.
Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
projects / linux-beck.git / log