Rewrite the comedi "driver" comment block to conform to the usual format
for comedi driver comment blocks and reformat it to use the usual block
comment style. In particular, the "Devices:" line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Note that the comedi board names I've added to the "Devices:" line don't
quite match the board names reported by the driver itself, as they
contain parentheses and I don't want nested parentheses on the
"Devices:" line (mostly because it confuses a script I use to extract
supported devices from the driver comments).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:55:12 +0000 (17:55 +0000)]
staging: comedi: usbduxsigma: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Also change "USB-DUX" to "USB-DUX-SIGMA" to distinguish it from the
other USB-DUX models.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:55:11 +0000 (17:55 +0000)]
staging: comedi: usbduxfast: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Also change "USB-DUX" to "USB-DUX-FAST" to distinguish it from the other
USB-DUX models.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:55:10 +0000 (17:55 +0000)]
staging: comedi: usbdux: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:55:09 +0000 (17:55 +0000)]
staging: comedi: rti802: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:55:08 +0000 (17:55 +0000)]
staging: comedi: rti800: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:55:07 +0000 (17:55 +0000)]
staging: comedi: rtd520: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:55:06 +0000 (17:55 +0000)]
staging: comedi: pcmuio: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:55:05 +0000 (17:55 +0000)]
staging: comedi: pcmmio: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:55:04 +0000 (17:55 +0000)]
staging: comedi: pcmda12: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:55:03 +0000 (17:55 +0000)]
staging: comedi: pcmad: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:55:02 +0000 (17:55 +0000)]
staging: comedi: pcl730: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Group boards from the same manufacturer together on the "Devices:" line
to avoid repeating the "[Manufacturer]" tag unnecessarily.
Also fix a couple of typos in the board names on the "Devices:" line:
"p16r16dio" was used twice, but one of them should be "p8r8dio";
"prearl-mm-p" should be "pearl-mm-p".
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:55:01 +0000 (17:55 +0000)]
staging: comedi: pcl726: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:55:00 +0000 (17:55 +0000)]
staging: comedi: pcl724: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:54:59 +0000 (17:54 +0000)]
staging: comedi: pcl711: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:54:58 +0000 (17:54 +0000)]
staging: comedi: ni_tiocmd: change comedi "driver" comment to "module"
This module contains support code for some other comedi drivers, but
isn't a comedi driver itself, so doesn't need a comedi "driver" comment.
To preserve the details in the original comment, change it into a comedi
"module" comment (which I've just invented) by changing the "Driver:"
line into a "Module:" line and removing the "Devices:" line.
Also reformat it to use the usual block comment style.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:54:57 +0000 (17:54 +0000)]
staging: comedi: ni_tio: change comedi "driver" comment to "module"
This module contains support code for some other comedi drivers, but
isn't a comedi driver itself, so doesn't need a comedi "driver" comment.
To preserve the details in the original comment, change it into a comedi
"module" comment (which I've just invented) by changing the "Driver:"
line into a "Module:" line and removing the "Devices:" line.
Also reformat it to use the usual block comment style.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:54:56 +0000 (17:54 +0000)]
staging: comedi: ni_labpc_pci: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:54:55 +0000 (17:54 +0000)]
staging: comedi: ni_labpc: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:54:54 +0000 (17:54 +0000)]
staging: comedi: ni_at_ao: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:54:53 +0000 (17:54 +0000)]
staging: comedi: ni_65xx: use board names on "Devices:" line
All the supported devices listed on the "Devices:" line currently use
the comedi driver name as the comedi board name. Historically, this
documented the name that should be passed to the "comedi_config" program
to "attach" the device via the COMEDI_DEVCONFIG ioctl. Some drivers
expected the driver name and others expected the board name. Since this
driver no longer supports the legacy "attach" mechanism, change the
"Devices:" list to show the board names, as that is probably more
useful.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:54:52 +0000 (17:54 +0000)]
staging: comedi: ni_65xx: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:54:51 +0000 (17:54 +0000)]
staging: comedi: ni_6527: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:54:50 +0000 (17:54 +0000)]
staging: comedi: mf6x4: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:54:49 +0000 (17:54 +0000)]
staging: comedi: me_daq: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:54:48 +0000 (17:54 +0000)]
staging: comedi: ke_counter: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:54:47 +0000 (17:54 +0000)]
staging: comedi: ii_pci20kc: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rewrite the comedi "driver" comment block to conform to the usual format
for comedi driver comment blocks and reformat it to use the usual block
comment style. In particular, the "Devices:" line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Change the original "Devices:" line to a "Description:" line.
Remove the "Version:" line as we don't care about driver version numbers
in the kernel.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:54:45 +0000 (17:54 +0000)]
staging: comedi: dt282x: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:54:44 +0000 (17:54 +0000)]
staging: comedi: dmm32at: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:54:43 +0000 (17:54 +0000)]
staging: comedi: das6402: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:54:42 +0000 (17:54 +0000)]
staging: comedi: das16: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:54:41 +0000 (17:54 +0000)]
staging: comedi: das08_pci: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:54:40 +0000 (17:54 +0000)]
staging: comedi: das08_isa: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is a module containing common code for the "das08_cs", "das08_isa"
and "das08_pci" comedi drivers. It does not need its own comedi
"driver" comment block, so remove it.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:54:38 +0000 (17:54 +0000)]
staging: comedi: dac02: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:54:37 +0000 (17:54 +0000)]
staging: comedi: comedi_parport: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:54:36 +0000 (17:54 +0000)]
staging: comedi: cb_pcidda: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:54:35 +0000 (17:54 +0000)]
staging: comedi: c6xdigio: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:54:34 +0000 (17:54 +0000)]
staging: comedi: adv_pci1724: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:54:33 +0000 (17:54 +0000)]
staging: comedi: adv_pci1723: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:54:32 +0000 (17:54 +0000)]
staging: comedi: adl_pci8164: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rewrite the comedi "driver" comment block to conform to the usual format
for comedi driver comment blocks and reformat it to use the usual block
comment style. In particular, the "Devices:" line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
The original comment indicated the number of input and output channels
in each item on the "Devices:" line. Move this information into a
separate paragraph moved from a block comment found elsewhere in the
driver.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Mon, 5 Jan 2015 17:54:30 +0000 (17:54 +0000)]
staging: comedi: adl_pci6208: rewrite "Devices:" line
Rewrite the "Devices:" line in the comedi "driver" comment to conform to
the usual comedi format for this line. The line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Rewrite the comedi "driver" comment block to conform to the usual format
for comedi driver comment blocks and reformat it to use the usual block
comment style. In particular, the "Devices:" line should be a
comma-separated list where the first item is in the following format:
[Manufacturer] BOARD-NAME (comedi-board-name)
The "[Manufacturer]" and/or "(comedi-board-name)" parts may be omitted
from following items, in which case the parts from the preceding item
are used. The "Devices:" line may be continued continued over several
lines by using one or more spaces at the start of each continuation line
(not counting the space after the "*" in the block comment).
The original comment indicated the number of DIO channels in each item
on the "Devices:" line. Move this information into separate paragraphs.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
drumber-1 [Wed, 3 Dec 2014 13:33:57 +0000 (13:33 +0000)]
Staging: comedi: fix spacing coding style issue in s626.c
This is a patch to the s626.c file that fixes a spacing error found by the checkpatch.pl tool Signed-off-by: Jacob L Close <drumber01@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The interrupt used by this driver is shared. If the board did not cause
the interrupt the driver should return IRQ_NONE so that another driver
can handle it. Fix the interrupt handler so this happens.
Tidy up the interrupt handler a bit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: addi_apci_1500: use amcc_s5933.h defines
PCI Bar 0 accesses the AMCC S5933 PCI controller used on this board.
Use the defines from amcc_35933.h and remove the "magic" numbers.
Rename the CamelCase private data member 'i_IobaseAmcc' used to hold
the address for PCI Bar 0.
Remove the unnecessary 'ui_Status' local variable in apci1500_do_bits()
that is used to hold the result of some dummy reads. Rename the
CamelCase local variable 'ui_InterruptStatus' that is used to check the
interrupt from the amcc chip.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce a helper function to reset the Z8536 CIO device.
Spinlock the initial reset of the Z8536 chip that puts it in State 0.
The z8536_{read,write} operations already do the spinlock to protect
the indirect register access.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Sun, 28 Dec 2014 21:08:08 +0000 (13:08 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Paolo Bonzini:
"The important fixes are for two bugs introduced by the merge window.
On top of this, add a couple of WARN_ONs and stop spamming dmesg on
pretty much every boot of a virtual machine"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: warn on more invariant breakage
kvm: fix sorting of memslots with base_gfn == 0
kvm: x86: drop severity of "generation wraparound" message
kvm: x86: vmx: reorder some msr writing
Paolo Bonzini [Sat, 27 Dec 2014 17:01:00 +0000 (18:01 +0100)]
kvm: fix sorting of memslots with base_gfn == 0
Before commit 0e60b0799fed (kvm: change memslot sorting rule from size
to GFN, 2014-12-01), the memslots' sorting key was npages, meaning
that a valid memslot couldn't have its sorting key equal to zero.
On the other hand, a valid memslot can have base_gfn == 0, and invalid
memslots are identified by base_gfn == npages == 0.
Because of this, commit 0e60b0799fed broke the invariant that invalid
memslots are at the end of the mslots array. When a memslot with
base_gfn == 0 was created, any invalid memslot before it were left
in place.
This can be fixed by changing the insertion to use a ">=" comparison
instead of "<=", but some care is needed to avoid breaking the case
of deleting a memslot; see the comment in update_memslots.
Thanks to Tiejun Chen for posting an initial patch for this bug.
Reported-by: Jamie Heilman <jamie@audible.transient.net> Reported-by: Andy Lutomirski <luto@amacapital.net> Tested-by: Jamie Heilman <jamie@audible.transient.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linus Torvalds [Sat, 27 Dec 2014 21:12:00 +0000 (13:12 -0800)]
Merge tag 'sound-3.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Just a couple of fixes for the new Intel Skylake HD-audio support"
* tag 'sound-3.19-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda_intel: apply the Seperate stream_tag for Skylake
ALSA: hda_controller: Separate stream_tag for input and output streams.
Tiejun Chen [Tue, 23 Dec 2014 08:21:11 +0000 (16:21 +0800)]
kvm: x86: vmx: reorder some msr writing
The commit 34a1cd60d17f, "x86: vmx: move some vmx setting from
vmx_init() to hardware_setup()", tried to refactor some codes
specific to vmx hardware setting into hardware_setup(), but some
msr writing should depend on our previous setting condition like
enable_apicv, enable_ept and so on.
Al Viro [Sat, 27 Dec 2014 03:43:19 +0000 (22:43 -0500)]
[regression] braino in "lustre: use is_root_inode()"
In one of the places (ll_md_blocking_ast()) we had open-coded
!is_root_inode(inode) and replaced it with is_root_inode(inode).
See the last chunk of f76c23:
- inode != inode->i_sb->s_root->d_inode)
+ is_root_inode(inode))
should've been
+ !is_root_inode(inode))
obviously...
Linus Torvalds [Fri, 26 Dec 2014 21:41:05 +0000 (13:41 -0800)]
Merge branch 'parisc-3.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc build fix from Helge Deller:
"This unbreaks the kernel compilation on parisc with gcc-4.9"
* 'parisc-3.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: fix out-of-register compiler error in ldcw inline assembler function
parisc: fix out-of-register compiler error in ldcw inline assembler function
The __ldcw macro has a problem when its argument needs to be reloaded from
memory. The output memory operand and the input register operand both need to
be reloaded using a register in class R1_REGS when generating 64-bit code.
This fails because there's only a single register in the class. Instead, use a
memory clobber. This also makes the __ldcw macro a compiler memory barrier.
Signed-off-by: John David Anglin <dave.anglin@bell.net> Cc: <stable@vger.kernel.org> [3.13+] Signed-off-by: Helge Deller <deller@gmx.de>
Libin Yang [Fri, 19 Dec 2014 00:44:31 +0000 (08:44 +0800)]
ALSA: hda_intel: apply the Seperate stream_tag for Skylake
The total stream number of Skylake's input and output stream
exceeds 15, which will cause some streams do not work because
of the overflow on SDxCTL.STRM field if using the legacy
stream tag allocation method.
This patch uses the new stream tag allocation method by add
the flag AZX_DCAPS_SEPARATE_STREAM_TAG for Skylake platform.
Rafal Redzimski [Fri, 19 Dec 2014 00:44:30 +0000 (08:44 +0800)]
ALSA: hda_controller: Separate stream_tag for input and output streams.
Implemented separate stream_tag assignment for input and output streams.
According to hda specification stream tag must be unique throughout the
input streams group, however an output stream might use a stream tag
which is already in use by an input stream. This change is necessary
to support HW which provides a total of more than 15 stream DMA engines
which with legacy implementation causes an overflow on SDxCTL.STRM
field (and the whole SDxCTL register) and as a result usage of
Reserved value 0 in the SDxCTL.STRM field which confuses HDA controller.
Signed-off-by: Rafal Redzimski <rafal.f.redzimski@intel.com> Signed-off-by: Jayachandran B <jayachandran.b@intel.com> Signed-off-by: Libin Yang <libin.yang@intel.com> Reviewed-by: Vinod Koul <vinod.koul@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Linus Torvalds [Fri, 26 Dec 2014 00:04:15 +0000 (16:04 -0800)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Xmas fixes pull:
core:
one atomic fix, revert the WARN_ON dumb buffers patch.
agp:
fixup Dave J.
nouveau:
fix 3.18 regression for old userspace
tegra fixes:
vblank and iommu fixes
amdkfd:
fix bugs shown by testing with userspace, init apertures once
msm:
hdmi fixes and cleanup
i915:
misc fixes
There is also a link ordering fix that I've asked to be cc'ed to you,
putting iommu before gpu, it fixes an issue with amdkfd when things
are all in the kernel, but I didn't like sending it via my tree
without discussion.
I'll probably be a bit on/off for a few weeks with pulls now, due to
holidays and LCA, so don't be surprised if stuff gets a bit backed up,
and things end up a bit large due to lag"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (28 commits)
Revert "drm/gem: Warn on illegal use of the dumb buffer interface v2"
agp: Fix up email address & attributions in AGP MODULE_AUTHOR tags
nouveau: bring back legacy mmap handler
drm/msm/hdmi: rework HDMI IRQ handler
drm/msm/hdmi: enable regulators before clocks to avoid warnings
drm/msm/mdp5: update irqs on crtc<->encoder link change
drm/msm: block incoming update on pending updates
drm/atomic: fix potential null ptr on plane enable
drm/msm: Deletion of unnecessary checks before the function call "release_firmware"
drm/msm: Deletion of unnecessary checks before two function calls
drm/tegra: dc: Select root window for event dispatch
drm/tegra: gem: Use the proper size for GEM objects
drm/tegra: gem: Flush buffer objects upon allocation
drm/tegra: dc: Fix a potential race on page-flip completion
drm/tegra: dc: Consistently use the same pipe
drm/irq: Add drm_crtc_vblank_count()
drm/irq: Add drm_crtc_handle_vblank()
drm/irq: Add drm_crtc_send_vblank_event()
drm/i915: Disable PSMI sleep messages on all rings around context switches
drm/i915: Force the CS stall for invalidate flushes
...
Linus Torvalds [Thu, 25 Dec 2014 23:56:34 +0000 (15:56 -0800)]
Merge tag 'for-linus-2' of git://git.code.sf.net/p/openipmi/linux-ipmi
Pull ipmi driver bugfixes from Corey Minyard:
"Fix two bugs:
One that lockdep turned up, I didn't go far enough with cleanup of
attributes for IPMI. This has been there a long time; my previous fix
of this didn't fix all the attributes.
One fix for some arches that need an explicit linux/ctype.h for
isspace()"
* tag 'for-linus-2' of git://git.code.sf.net/p/openipmi/linux-ipmi:
ipmi: Fix compile issue with isspace()
ipmi: Finish cleanup of BMC attributes
Dave Airlie [Wed, 24 Dec 2014 02:59:08 +0000 (12:59 +1000)]
Merge tag 'amdkfd-fixes-2014-12-23' of git://people.freedesktop.org/~gabbayo/linux into drm-fixes
- Display MEC fw version in topology. Without this, the HSA userspace
stack is broken.
- Init apertures information only once per process
* tag 'amdkfd-fixes-2014-12-23' of git://people.freedesktop.org/~gabbayo/linux:
amdkfd: init aperture once per process
amdkfd: Display MEC fw version in topology node
drm/radeon: Add implementation of get_fw_version
drm/amd: Add get_fw_version to kfd-->kgd interface
Linus Torvalds [Wed, 24 Dec 2014 02:13:16 +0000 (18:13 -0800)]
Merge branch 'upstream' of git://git.infradead.org/users/pcmoore/audit
Pull audit fixes from Paul Moore:
"Four patches to fix various problems with the audit subsystem, all are
fairly small and straightforward.
One patch fixes a problem where we weren't using the correct gfp
allocation flags (GFP_KERNEL regardless of context, oops), one patch
fixes a problem with old userspace tools (this was broken for a
while), one patch fixes a problem where we weren't recording pathnames
correctly, and one fixes a problem with PID based filters.
In general I don't think there is anything controversial with this
patchset, and it fixes some rather unfortunate bugs; the allocation
flag one can be particularly scary looking for users"
* 'upstream' of git://git.infradead.org/users/pcmoore/audit:
audit: restore AUDIT_LOGINUID unset ABI
audit: correctly record file names with different path name types
audit: use supplied gfp_mask from audit_buffer in kauditd_send_multicast_skb
audit: don't attempt to lookup PIDs when changing PID filtering audit rules
A regression was caused by commit 780a7654cee8:
audit: Make testing for a valid loginuid explicit.
(which in turn attempted to fix a regression caused by e1760bd)
When audit_krule_to_data() fills in the rules to get a listing, there was a
missing clause to convert back from AUDIT_LOGINUID_SET to AUDIT_LOGINUID.
This broke userspace by not returning the same information that was sent and
expected.
The rule:
auditctl -a exit,never -F auid=-1
gives:
auditctl -l
LIST_RULES: exit,never f24=0 syscall=all
when it should give:
LIST_RULES: exit,never auid=-1 (0xffffffff) syscall=all
Tag it so that it is reported the same way it was set. Create a new
private flags audit_krule field (pflags) to store it that won't interact with
the public one from the API.
Cc: stable@vger.kernel.org # v3.10-rc1+ Signed-off-by: Richard Guy Briggs <rgb@redhat.com> Signed-off-by: Paul Moore <pmoore@redhat.com>
Linus Torvalds [Tue, 23 Dec 2014 19:03:28 +0000 (11:03 -0800)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- __cpu_suspend mm switching fix after warm boot
- arch_setup_dma_ops implementation
- pgd_page compilation error fix
- defconfig updates
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mm: Add pgd_page to support RCU fast_gup
arm64: defconfig: defconfig update for 3.19
arm64: kernel: fix __cpu_suspend mm switch on warm-boot
arm64: Replace set_arch_dma_coherent_ops with arch_setup_dma_ops
Jungseok Lee [Sat, 20 Dec 2014 00:49:40 +0000 (00:49 +0000)]
arm64: mm: Add pgd_page to support RCU fast_gup
This patch adds pgd_page definition in order to keep supporting
HAVE_GENERIC_RCU_GUP configuration. In addition, it changes pud_page
expression to align with pmd_page for readability.
An introduction of pgd_page resolves the following build breakage
under 4KB + 4Level memory management combo.
mm/gup.c: In function 'gup_huge_pgd':
mm/gup.c:889:2: error: implicit declaration of function 'pgd_page' [-Werror=implicit-function-declaration]
head = pgd_page(orig);
^
mm/gup.c:889:7: warning: assignment makes pointer from integer without a cast
head = pgd_page(orig);
Cc: Will Deacon <will.deacon@arm.com> Cc: Steve Capper <steve.capper@linaro.org> Signed-off-by: Jungseok Lee <jungseoklee85@gmail.com>
[catalin.marinas@arm.com: remove duplicate pmd_page definition] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
arm64: kernel: fix __cpu_suspend mm switch on warm-boot
On arm64 the TTBR0_EL1 register is set to either the reserved TTBR0
page tables on boot or to the active_mm mappings belonging to user space
processes, it must never be set to swapper_pg_dir page tables mappings.
When a CPU is booted its active_mm is set to init_mm even though its
TTBR0_EL1 points at the reserved TTBR0 page mappings. This implies
that when __cpu_suspend is triggered the active_mm can point at
init_mm even if the current TTBR0_EL1 register contains the reserved
TTBR0_EL1 mappings.
Therefore, the mm save and restore executed in __cpu_suspend might
turn out to be erroneous in that, if the current->active_mm corresponds
to init_mm, on resume from low power it ends up restoring in the
TTBR0_EL1 the init_mm mappings that are global and can cause speculation
of TLB entries which end up being propagated to user space.
This patch fixes the issue by checking the active_mm pointer before
restoring the TTBR0 mappings. If the current active_mm == &init_mm,
the code sets the TTBR0_EL1 to the reserved TTBR0 mapping instead of
switching back to the active_mm, which is the expected behaviour
corresponding to the TTBR0_EL1 settings when __cpu_suspend was entered.
Dave Jones [Fri, 19 Dec 2014 16:23:50 +0000 (11:23 -0500)]
agp: Fix up email address & attributions in AGP MODULE_AUTHOR tags
- Remove soon-to-be-dead @redhat address.
- Jeff Hartmann wrote the bulk of the original backend code, and should
at least get a mention in the MODULE_AUTHOR for backend.o
- Various people at Intel have done a lot more work than myself on the
intel-* drivers, so again, mention that.
Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Linus Torvalds [Mon, 22 Dec 2014 22:47:17 +0000 (14:47 -0800)]
Merge tag 'dm-3.19-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
"Thre stable fixes and one fix for a regression introduced during 3.19
merge:
- Fix inability to discard used space when the thin-pool target is in
out-of-data-space mode and also transition the thin-pool back to
write mode once free space is made available.
- Fix DM core bio-based end_io bug that prevented proper
post-processing of the error code returned from the block layer.
- Fix crash in DM thin-pool due to thin device being added to the
pool's active_thins list before properly initializing the thin
device's refcount"
* tag 'dm-3.19-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm: fix missed error code if .end_io isn't implemented by target_type
dm thin: fix crash by initializing thin device's refcount and completion earlier
dm thin: fix missing out-of-data-space to write mode transition if blocks are released
dm thin: fix inability to discard blocks when in out-of-data-space mode
Dave Airlie [Mon, 22 Dec 2014 22:24:26 +0000 (08:24 +1000)]
Merge tag 'drm/tegra/for-3.19-rc1-fixes' of git://people.freedesktop.org/~tagr/linux into drm-fixes
drm/tegra: Fixes for v3.19-rc1
This is a set of fixes for two regressions and one bug in the IOMMU
mapping code. It turns out that all of these issues turn up primarily
on Tegra30 hardware. The IOMMU mapping bug only manifests on buffers
that aren't multiples of the page size. I happened to be testing HDMI
with 1080p while writing the code and framebuffers for that happen to
fit exactly within 2025 pages of 4 KiB each.
One of the regressions is caused by the IOMMU code allocating pages from
shmem which can have associated cache lines. If the pages aren't flushed
then these cache lines may be flushed later on and cause framebuffer
corruption. I'm not sure why I didn't see this before. Perhaps the board
that I was using had enough RAM so that the pages shmem would hand out
had a better chance of being unused. Or maybe I didn't look too closely.
The fix for this is to fake up an SG table so that it can be passed to
the DMA API. Ideally this would use drm_clflush_*(), but implementing
that for ARM causes DRM to fail to build as a module since some of the
low-level cache maintenance functions aren't exported. Hopefully we can
get a suitable API exported on ARM for the next release.
The second regression is caused by a mismatch between the hardware pipe
number and the CRTC's DRM index. These were used inconsistently, which
could cause one code location to call drm_vblank_get() with a different
pipe than the corresponding drm_vblank_put(), thereby causing the
reference count to become unbalanced. Alexandre also reported a possible
race condition related to this, which this series also fixes.
* tag 'drm/tegra/for-3.19-rc1-fixes' of git://people.freedesktop.org/~tagr/linux:
drm/tegra: dc: Select root window for event dispatch
drm/tegra: gem: Use the proper size for GEM objects
drm/tegra: gem: Flush buffer objects upon allocation
drm/tegra: dc: Fix a potential race on page-flip completion
drm/tegra: dc: Consistently use the same pipe
drm/irq: Add drm_crtc_vblank_count()
drm/irq: Add drm_crtc_handle_vblank()
drm/irq: Add drm_crtc_send_vblank_event()
Dave Airlie [Mon, 22 Dec 2014 22:23:08 +0000 (08:23 +1000)]
Merge tag 'drm-intel-next-fixes-2014-12-17' of git://anongit.freedesktop.org/drm-intel into drm-fixes
misc i915 fixes.
* tag 'drm-intel-next-fixes-2014-12-17' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Disable PSMI sleep messages on all rings around context switches
drm/i915: Force the CS stall for invalidate flushes
drm/i915: Invalidate media caches on gen7
drm/i915: sanitize RPS resetting during GPU reset
drm/i915: move RPS PM_IER enabling to gen6_enable_rps_interrupts
drm/i915: vlv: fix IRQ masking when uninstalling interrupts
Dave Airlie [Mon, 22 Dec 2014 22:22:22 +0000 (08:22 +1000)]
Merge tag 'topic/atomic-fixes-2014-12-17' of git://anongit.freedesktop.org/drm-intel into drm-fixes
Yeah a pull for one patch is a bit overkill but I started to assemble the
various patches for 3.20 in a branch for atomic props/ioctl and didn't
realize that this bugfix here at the beginnning of the branch should be in
3.19 (because msm is using the helpers arleady). So if you'd merge we'd
have it twice or or I need to shuffle branches again. Can do if you want.
* tag 'topic/atomic-fixes-2014-12-17' of git://anongit.freedesktop.org/drm-intel:
drm/atomic: fix potential null ptr on plane enable
Dave Airlie [Mon, 22 Dec 2014 22:21:54 +0000 (08:21 +1000)]
Merge branch 'msm-fixes-3.19' of git://people.freedesktop.org/~robclark/linux into drm-fixes
A few msm fixes for 3.19:
* hdmi regulators fix
* hdmi fix for spurious HPD interrupts
* fix for sync atomic update after async update (which could show
up with a setcrtc following a pageflip)
* couple little Coccinelle cleanups
* 'msm-fixes-3.19' of git://people.freedesktop.org/~robclark/linux:
drm/msm/hdmi: rework HDMI IRQ handler
drm/msm/hdmi: enable regulators before clocks to avoid warnings
drm/msm/mdp5: update irqs on crtc<->encoder link change
drm/msm: block incoming update on pending updates
drm/msm: Deletion of unnecessary checks before the function call "release_firmware"
drm/msm: Deletion of unnecessary checks before two function calls
Dave Airlie [Tue, 16 Dec 2014 06:33:09 +0000 (16:33 +1000)]
nouveau: bring back legacy mmap handler
nouveau userspace back at 1.0.1 used to call the X server
DRIOpenDRMMaster interface even for DRI2 (doh!), this attempts
to map the sarea and fails if it can't.
Paul Moore [Mon, 22 Dec 2014 17:27:39 +0000 (12:27 -0500)]
audit: correctly record file names with different path name types
There is a problem with the audit system when multiple audit records
are created for the same path, each with a different path name type.
The root cause of the problem is in __audit_inode() when an exact
match (both the path name and path name type) is not found for a
path name record; the existing code creates a new path name record,
but it never sets the path name in this record, leaving it NULL.
This patch corrects this problem by assigning the path name to these
newly created records.
There are many ways to reproduce this problem, but one of the
easiest is the following (assuming auditd is running):
Afterwards, or while the commands above are running, check the audit
log and pay special attention to the PATH records. A faulty kernel
will display something like the following for the file creation:
This issue was brought up by a number of people, but special credit
should go to hujianyang@huawei.com for reporting the problem along
with an explanation of the problem and a patch. While the original
patch did have some problems (see the archive link below), it did
demonstrate the problem and helped kickstart the fix presented here.
* https://lkml.org/lkml/2014/9/5/66
Reported-by: hujianyang <hujianyang@huawei.com> Signed-off-by: Paul Moore <pmoore@redhat.com> Acked-by: Richard Guy Briggs <rgb@redhat.com>
Catalin Marinas [Thu, 18 Dec 2014 17:13:49 +0000 (17:13 +0000)]
arm64: Replace set_arch_dma_coherent_ops with arch_setup_dma_ops
Commit a3a60f81ee6f (dma-mapping: replace set_arch_dma_coherent_ops with
arch_setup_dma_ops) changes the of_dma_configure() arch dma_ops callback
to arch_setup_dma_ops but only the arch/arm code is updated. Subsequent
commit 97890ba9289c (dma-mapping: detect and configure IOMMU in
of_dma_configure) changes the arch_setup_dma_ops() prototype further to
handle iommu. The patch makes the corresponding arm64 changes.
Corey Minyard [Sat, 13 Dec 2014 01:06:07 +0000 (19:06 -0600)]
ipmi: Finish cleanup of BMC attributes
The previous cleanup of BMC attributes left a few holes, and if
you run with lockdep debugging with a BMC with the proper attributes,
you could get a warning.
This patch removes all the unused attributes from the BMC structure,
since they are all declared in the .data section now. It makes
the attributes all static. It fixes the referencing of the
attributes in a couple of cases that dynamically added the files
depending on BMC information.
Linus Torvalds [Sun, 21 Dec 2014 00:48:59 +0000 (16:48 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/borntraeger/linux
Pull ACCESS_ONCE cleanup preparation from Christian Borntraeger:
"kernel: Provide READ_ONCE and ASSIGN_ONCE
As discussed on LKML http://marc.info/?i=54611D86.4040306%40de.ibm.com
ACCESS_ONCE might fail with specific compilers for non-scalar
accesses.
Here is a set of patches to tackle that problem.
The first patch introduce READ_ONCE and ASSIGN_ONCE. If the data
structure is larger than the machine word size memcpy is used and a
warning is emitted. The next patches fix up several in-tree users of
ACCESS_ONCE on non-scalar types.
This does not yet contain a patch that forces ACCESS_ONCE to work only
on scalar types. This is targetted for the next merge window as Linux
next already contains new offenders regarding ACCESS_ONCE vs.
non-scalar types"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/borntraeger/linux:
s390/kvm: REPLACE barrier fixup with READ_ONCE
arm/spinlock: Replace ACCESS_ONCE with READ_ONCE
arm64/spinlock: Replace ACCESS_ONCE READ_ONCE
mips/gup: Replace ACCESS_ONCE with READ_ONCE
x86/gup: Replace ACCESS_ONCE with READ_ONCE
x86/spinlock: Replace ACCESS_ONCE with READ_ONCE
mm: replace ACCESS_ONCE with READ_ONCE or barriers
kernel: Provide READ_ONCE and ASSIGN_ONCE
Linus Torvalds [Sun, 21 Dec 2014 00:42:36 +0000 (16:42 -0800)]
Merge tag 'clk-for-linus-3.19' of git://git.linaro.org/people/mike.turquette/linux
Pull clk framework updates from Mike Turquette:
"This is much later than usual due to several last minute bugs that had
to be addressed. As usual the majority of changes are new drivers and
modifications to existing drivers. The core recieved many fixes along
with the groundwork for several large changes coming in the future
which will better parition clock providers from clock consumers"
* tag 'clk-for-linus-3.19' of git://git.linaro.org/people/mike.turquette/linux: (86 commits)
clk: samsung: Fix Exynos 5420 pinctrl setup and clock disable failure due to domain being gated
ARM: OMAP3: clock: fix boot breakage in legacy mode
ARM: OMAP2+: clock: fix DPLL code to use new determine rate APIs
clk: Really fix deadlock with mmap_sem
clk: mmp: fix sparse non static symbol warning
clk: Change clk_ops->determine_rate to return a clk_hw as the best parent
clk: change clk_debugfs_add_file to take a struct clk_hw
clk: Don't expose __clk_get_accuracy
clk: Don't try to use a struct clk* after it could have been freed
clk: Remove unused function __clk_get_prepare_count
clk: samsung: Fix double add of syscore ops after driver rebind
clk: samsung: exynos4: set parent of sclk_hdmiphy to hdmi
clk: samsung: exynos4415: Fix build with PM_SLEEP disabled
clk: samsung: remove unnecessary inclusion of header files from clk.h
clk: samsung: remove unnecessary CONFIG_OF from clk.c
clk: samsung: Spelling s/bwtween/between/
clk: rockchip: Add support for the mmc clock phases using the framework
clk: rockchip: add bindings for the mmc clocks
clk: rockchip: rk3288 export i2s0_clkout for use in DT
clk: rockchip: use clock ID for DMC (memory controller) on rk3288
...
Linus Torvalds [Sat, 20 Dec 2014 21:52:52 +0000 (13:52 -0800)]
Merge branch 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull more i2c updates from Wolfram Sang:
"Included are two bugfixes needing some bigger refactoring (sh_mobile:
deferred probe with DMA, mv64xxx: fix offload support) and one
deprecated driver removal I thought would go in via ppc but I
misunderstood. It has a proper ack from BenH"
* 'i2c/for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: sh_mobile: fix uninitialized var when debug is enabled
macintosh: therm_pm72: delete deprecated driver
i2c: sh_mobile: I2C_SH_MOBILE should depend on HAS_DMA
i2c: sh_mobile: rework deferred probing
i2c: sh_mobile: refactor DMA setup
i2c: mv64xxx: rework offload support to fix several problems
i2c: mv64xxx: use BIT() macro for register value definitions
projects / karo-tx-linux.git / log