powerpc/xmon: Enable HW instruction breakpoint on POWER8
This patch enables support for hardware instruction breakpoint in xmon
on POWER8 platform with the help of a new register called the CIABR
(Completed Instruction Address Breakpoint Register). With this patch, a
single hardware instruction breakpoint can be added and cleared during
any active xmon debug session. The hardware based instruction breakpoint
mechanism works correctly with the existing TRAP based instruction
breakpoint available on xmon.
There are no powerpc CPU with CPU_FTR_IABR feature any more. This patch
has re-purposed all the existing IABR related code to work with CIABR
register based HW instruction breakpoint.
This has one odd feature, which is that when we hit a breakpoint xmon
doesn't tell us we have hit the breakpoint. This is because xmon is
expecting bp->address == regs->nip. Because CIABR fires on completition
regs->nip points to the instruction after the breakpoint. We could fix
that, but it would then confuse other parts of the xmon code which think
we need to emulate the instruction. [mpe]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
performance_monitor_exception() is executed in a context with interrupt
disabled and preemption enabled. When there is a user space page fault
happened, do_page_fault() invoke in_atomic() to decide whether kernel
should handle such page fault. in_atomic() only check preempt_count.
So need call pagefault_disable() to disable preemption before reading
user stack.
Signed-off-by: Jiang Lu <lu.jiang@windriver.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
powerpc/mm: Check for matching hpte without taking hpte lock
With smaller hash page table config, we would end up in situation
where we would be replacing hash page table slot frequently. In
such config, we will find the hpte to be not matching, and we
can do that check without holding the hpte lock. We need to
recheck the hpte again after holding lock.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Greg Kurz [Tue, 25 Nov 2014 16:10:06 +0000 (17:10 +0100)]
powerpc: Drop useless warning in eeh_init()
This is what we get in dmesg when booting a pseries guest and
the hypervisor doesn't provide EEH support.
[ 0.166655] EEH functionality not supported
[ 0.166778] eeh_init: Failed to call platform init function (-22)
Since both powernv_eeh_init() and pseries_eeh_init() already complain when
hitting an error, it is not needed to print more (especially such an
uninformative message).
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com> Acked-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Gavin Shan [Sat, 22 Nov 2014 10:58:09 +0000 (21:58 +1100)]
powerpc/eeh: Dump PHB diag-data early
On PowerNV platform, PHB diag-data is dumped after stopping device
drivers. In case of recursive EEH errors, the kernel is usually
crashed before dumping PHB diag-data for the second EEH error. It's
hard to locate the root cause of the second EEH error without PHB
diag-data.
The patch adds one more EEH option "eeh=early_log", which helps
dumping PHB diag-data immediately once frozen PE is detected, in
order to get the PHB diag-data for the second EEH error.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Gavin Shan [Thu, 13 Nov 2014 23:47:30 +0000 (10:47 +1100)]
powerpc/eeh: Recover EEH error on ownership change for BCM5719
In PCI passthrou scenario, we need simulate EEH recovery for Emulex
adapters when their ownership changes, as we did in commit 5cfb20b96
("powerpc/eeh: Emulate EEH recovery for VFIO devices"). Broadcom
BCM5719 adpaters are facing same problem and needs same cure.
Gavin Shan [Thu, 13 Nov 2014 23:47:29 +0000 (10:47 +1100)]
powerpc/eeh: Set EEH_PE_RESET on PE reset
The patch introduces additional flag EEH_PE_RESET to indicate the
corresponding PE is under reset. In turn, the PE retrieval bakcend
on PowerNV platform can return unfrozen state for the EEH core to
moving forward. Flag EEH_PE_CFG_BLOCKED isn't the correct one for
the purpose.
In PCI passthrou case, the problem is more worse: Guest doesn't
recover 6th EEH error. The PE is left in isolated (frozen) and
config blocked state on Broadcom adapters. We can't retrieve the
PE's state correctly any more, even from the host side via sysfs
/sys/bus/pci/devices/xxx/eeh_pe_state.
Michael Ellerman [Tue, 18 Nov 2014 05:47:35 +0000 (16:47 +1100)]
powerpc: Remove more traces of bootmem
Although we are now selecting NO_BOOTMEM, we still have some traces of
bootmem lying around. That is because even with NO_BOOTMEM there is
still a shim that converts bootmem calls into memblock calls, but
ultimately we want to remove all traces of bootmem.
Most of the patch is conversions from alloc_bootmem() to
memblock_virt_alloc(). In general a call such as:
p = (struct foo *)alloc_bootmem(x);
Becomes:
p = memblock_virt_alloc(x, 0);
We don't need the cast because memblock_virt_alloc() returns a void *.
The alignment value of zero tells memblock to use the default alignment,
which is SMP_CACHE_BYTES, the same value alloc_bootmem() uses.
We remove a number of NULL checks on the result of
memblock_virt_alloc(). That is because memblock_virt_alloc() will panic
if it can't allocate, in exactly the same way as alloc_bootmem(), so the
NULL checks are and always have been redundant.
The memory returned by memblock_virt_alloc() is already zeroed, so we
remove several memsets of the result of memblock_virt_alloc().
Finally we convert a few uses of __alloc_bootmem(x, y, MAX_DMA_ADDRESS)
to just plain memblock_virt_alloc(). We don't use memblock_alloc_base()
because MAX_DMA_ADDRESS is ~0ul on powerpc, so limiting the allocation
to that is pointless, 16XB ought to be enough for anyone.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Michael Ellerman [Tue, 18 Nov 2014 05:58:15 +0000 (16:58 +1100)]
Merge remote-tracking branch 'scottwood/next' into next
Scott says:
"Highlights include a bunch of 8xx optimizations, device tree bindings
for Freescale BMan, QMan, and FMan datapath components, misc device tree
updates, and inbound rio window support."
Michael Neuling [Fri, 14 Nov 2014 07:09:28 +0000 (18:09 +1100)]
cxl: Name interrupts in /proc/interrupt
Currently all interrupts generated by cxl are named "cxl". This is not very
informative as we can't distinguish between cards, AFUs, error interrupts, user
contexts and user interrupts numbers. Being able to distinguish them is useful
for setting affinity.
This patch gives each of these names in /proc/interrupts.
A two card CAPI system, with afu0.0 having 2 active contexts each with 4 user
IRQs each, will now look like this:
Signed-off-by: Michael Neuling <mikey@neuling.org> Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Ian Munsie [Fri, 14 Nov 2014 06:37:50 +0000 (17:37 +1100)]
cxl: Return error to PSL if IRQ demultiplexing fails & print clearer warning
If an AFU has a hardware bug that causes it to acknowledge a context
terminate or remove while that context has outstanding transactions, it
is possible for the kernel to receive an interrupt for that context
after we have removed it from the context list.
The kernel will not be able to demultiplex the interrupt (or worse - if
we have already reallocated the process handle we could mis-attribute it
to the new context), and printed a big scary warning.
It did not acknowledge the interrupt, which would effectively halt
further translation fault processing on the PSL.
This patch makes the warning clearer about the likely cause of the issue
(i.e. hardware bug) to make it obvious to future AFU designers of what
needs to be fixed. It also prints out the process handle which can then
be matched up with hardware and software traces for debugging.
It also acknowledges the interrupt to the PSL with either an address
error or acknowledge, so that the PSL can continue with other
translations.
Signed-off-by: Ian Munsie <imunsie@au1.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Neelesh Gupta [Tue, 14 Oct 2014 08:38:36 +0000 (14:08 +0530)]
rtc/tpo: Driver to support rtc and wakeup on PowerNV platform
The patch implements the OPAL rtc driver that binds with the rtc
driver subsystem. The driver uses the platform device infrastructure
to probe the rtc device and register it to rtc class framework. The
'wakeup' is supported depending upon the property 'has-tpo' present
in the OF node. It provides a way to load the generic rtc driver in
in the absence of an OPAL driver.
The patch also moves the existing OPAL rtc get/set time interfaces to the
new driver and exposes the necessary OPAL calls using EXPORT_SYMBOL_GPL.
Vineeth Vijayan [Fri, 14 Nov 2014 09:12:05 +0000 (14:42 +0530)]
powerpc: Use generic PIE randomization
Back in 2009 we merged 501cb16d3cfd "Randomise PIEs", which added support for
randomizing PIE (Position Independent Executable) binaries.
That commit added randomize_et_dyn(), which correctly randomized the addresses,
but failed to honor PF_RANDOMIZE. That means it was not possible to disable PIE
randomization via the personality flag, or /proc/sys/kernel/randomize_va_space.
Since then there has been generic support for PIE randomization added to
binfmt_elf.c, selectable via ARCH_BINFMT_ELF_RANDOMIZE_PIE.
Enabling that allows us to drop randomize_et_dyn(), which means we start
honoring PF_RANDOMIZE correctly.
It also causes a fairly major change to how we layout PIE binaries.
Currently we will place the binary at 512MB-520MB for 32 bit binaries, or
512MB-1.5GB for 64 bit binaries, eg:
With this commit applied we don't do any special randomisation for the binary,
and instead rely on mmap randomisation. This means the binary ends up at high
addresses, eg:
Gavin Shan [Wed, 12 Nov 2014 02:36:10 +0000 (13:36 +1100)]
powerpc/powernv: Bail upon invalid master PE
When freezing compound PEs in pnv_ioda_freeze_pe(), we should bail
upon illegal master PE. We needn't freeze slave PE because it should
have been put into frozen state by hardware.
Reported-by: Anton Blanchard <anton@samba.org> Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Gavin Shan [Wed, 12 Nov 2014 02:36:08 +0000 (13:36 +1100)]
powerpc/powernv: Set PELTV for compound PEs
Commit 262af55 ("powerpc/powernv: Enable M64 aperatus for PHB3")
introduced compound PEs in order to support M64 aperatus on PHB3.
However, we never configured PELTV for compound PEs. The patch
fixes that by: parent PE can freeze all child compound PEs. Any
compound PE affects the group.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Gavin Shan [Wed, 12 Nov 2014 02:36:07 +0000 (13:36 +1100)]
powerpc/powernv: Initialize M64 PE in time
The patch initializes PE instance when reserving PE number to
keep consistent things as we did before. Also, it replaces the
iteration on bridge's windows with the prefered way.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Gavin Shan [Wed, 12 Nov 2014 02:36:06 +0000 (13:36 +1100)]
powerpc/powernv: Rename alloc_m64_pe() to reserve_m64_pe()
The patch renames alloc_m64_pe() to reserve_m64_pe() to reflect
its real usage: We reserve PE numbers for M64 segments in advance
and then pick up the reserved PE numbers when building the mapping
between PE numbers and M64 segments.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
mm: Update generic gup implementation to handle hugepage directory
Update generic gup implementation with powerpc specific details.
On powerpc at pmd level we can have hugepte, normal pmd pointer
or a pointer to the hugepage directory.
Tested-by: Steve Capper <steve.capper@linaro.org> Acked-by: Steve Capper <steve.capper@linaro.org> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Martijn de Gouw [Tue, 5 Aug 2014 13:52:32 +0000 (15:52 +0200)]
powerpc/fsl-rio: add support for mapping inbound windows
Add support for mapping and unmapping of inbound rapidio windows. This
allows for drivers to open up a part of local memory on the rapidio
network. Also applications can use this and tranfer blocks of data
over the network.
Signed-off-by: Martijn de Gouw <martijn.de.gouw@prodrive-technologies.com>
[scottwood@freescale.com: updated commit message based on review] Signed-off-by: Scott Wood <scottwood@freescale.com>
Scott Wood [Fri, 7 Nov 2014 02:56:07 +0000 (20:56 -0600)]
powerpc/fsl: Update fman dt binding with clock name and qbman link
The clock name "fmanclk" was given in the example, but not specified
in the binding itself. Made clock-names mandatory as otherwise there's
not much point having it.
Added a reference to the fsl,qman and fsl,bman properties proposed
in http://patchwork.ozlabs.org/patch/407034/ and
http://patchwork.ozlabs.org/patch/407035/
Signed-off-by: Scott Wood <scottwood@freescale.com>
Igal Liberman [Wed, 17 Sep 2014 11:08:30 +0000 (14:08 +0300)]
powerpc/fsl: Frame Manager Device Tree binding document
The Frame Manager (FMan) combines the Ethernet network interfaces with
packet distribution logic to provide intelligent distribution and
queuing decisions for incoming traffic at line rate.
This binding document describes Freescale's Frame Manager hardware
attributes that are used by the Frame Manager driver for its basic
initialization and configuration.
Signed-off-by: Igal Liberman <Igal.Liberman@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
Emil Medve [Wed, 5 Nov 2014 15:18:54 +0000 (09:18 -0600)]
dt/bindings: Introduce the FSL QorIQ DPAA QMan portal(s)
Portals are memory mapped interfaces to QMan that allow low-latency,
lock-less interaction by software running on processor cores,
accelerators and network interfaces with the QMan
Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Change-Id: I29764fa8093b5ce65460abc879446795c50d7185 Signed-off-by: Scott Wood <scottwood@freescale.com>
Emil Medve [Wed, 5 Nov 2014 15:18:53 +0000 (09:18 -0600)]
dt/bindings: Introduce the FSL QorIQ DPAA QMan
The Queue Manager is part of the Data-Path Acceleration Architecture
(DPAA). QMan supports queuing and QoS scheduling of frames to CPUs,
network interfaces and DPAA logic modules, maintains packet ordering
within flows. Besides providing flow-level queuing, is also
responsible for congestion management functions such as RED/WRED,
congestion notifications and tail discards. This binding covers the
CCSR space programming model
Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Change-Id: I3acb223893e42003d6c9dc061db568ec0b10d29b Signed-off-by: Scott Wood <scottwood@freescale.com>
Emil Medve [Wed, 5 Nov 2014 15:18:52 +0000 (09:18 -0600)]
dt/bindings: Introduce the FSL QorIQ DPAA BMan portal(s)
Portals are memory mapped interfaces to BMan that allow low-latency,
lock-less interaction by software running on processor cores,
accelerators and network interfaces with the BMan
Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Change-Id: I6d245ffc14ba3d0e91d403ac7c3b91b75a9e6a95 Signed-off-by: Scott Wood <scottwood@freescale.com>
Emil Medve [Wed, 5 Nov 2014 15:18:51 +0000 (09:18 -0600)]
dt/bindings: Introduce the FSL QorIQ DPAA BMan
The Buffer Manager is part of the Data-Path Acceleration Architecture
(DPAA). BMan supports hardware allocation and deallocation of buffers
belonging to pools originally created by software with configurable
depletion thresholds. This binding covers the CCSR space programming
model
Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Change-Id: I3ec479bfb3c91951e96902f091f5d7d2adbef3b2 Signed-off-by: Scott Wood <scottwood@freescale.com>
Boqun Feng [Tue, 11 Nov 2014 04:50:22 +0000 (12:50 +0800)]
powerpc: Fix comment typos in arch/powerpc/include/asm/bitops.h
In arch/powerpc/include/asm/bitops.h, the comments about bit numbers in
large (> 1 word) bitmaps have two typos:
- On ppc64 system, the LSB of the 4th word should be bit 192 rather than
196, because if it's bit 196, bit 192-195 will be missing in the
bitmap.
- On ppc32 system, the LSB of the second word should be bit 32 rather
than 31, because bit 31 is already in the first word.
This patch fixes these typos.
Signed-off-by: Boqun Feng <boqun.feng@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Paul Mackerras [Mon, 3 Nov 2014 04:46:43 +0000 (15:46 +1100)]
powerpc: Fix compilation of emulate_step()
Commit be96f63375a1 ("powerpc: Split out instruction analysis
part of emulate_step()") added some calls to do_fp_load()
and do_fp_store(), which fail to compile on configs with
CONFIG_PPC_FPU=n and CONFIG_PPC_EMULATE_SSTEP=y. This fixes
the compile by adding #ifdef CONFIG_PPC_FPU around the code
that calls these functions.
Signed-off-by: Paul Mackerras <paulus@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The system call FLIH (first-level interrupt handler) at 0xc00
unconditionally sets hardware priority to medium. For hypercalls, this
means we lose guest OS priority. The front end (do_kvm_0x**) to the
KVM interrupt handler always assumes that PPR priority is saved in
PACA exception save area, so it copies this to the kvm_hstate
structure. For hypercalls, this would be the saved priority from any
previous exception. Eventually, the guest gets resumed with an
incorrect priority.
The fix is to save the PPR priority in PACA exception save area before
switching HMT priorities in the FLIH so that existing code described above
in the KVM interrupt handler can copy it from there into the VCPU's saved
context.
Signed-off-by: Suresh Warrier <warrier@linux.vnet.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
[mpe: Dropped HMT_MEDIUM_PPR_DISCARD and reworded comment] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Gavin Shan [Wed, 12 Nov 2014 02:29:28 +0000 (13:29 +1100)]
powerpc/mm: Use PAGE_FACTOR
PAGE_FACTOR was defined to reflect the difference between configured
page size and fixed 4KB page size. Replace (PAGE_SHIFT - HW_PAGE_SHIFT)
with PAGE_FACTOR.
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Anton Blanchard [Mon, 10 Nov 2014 22:12:28 +0000 (09:12 +1100)]
powerpc: Fix bad NULL pointer check in udbg_uart_getc_poll()
We have some code in udbg_uart_getc_poll() that tries to protect
against a NULL udbg_uart_in, but gets it all wrong.
Found with the LLVM static analyzer (scan-build).
Fixes: 309257484cc1 ("powerpc: Cleanup udbg_16550 and add support for LPC PIO-only UARTs") Signed-off-by: Anton Blanchard <anton@samba.org>
[mpe: Add some newlines for readability while we're here] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Julia Lawall [Fri, 8 Aug 2014 10:07:47 +0000 (12:07 +0200)]
powerpc/pseries: delete unneeded test before of_node_put
Of_node_put supports NULL as its argument, so the initial test is not
necessary.
Suggested by Uwe Kleine-König.
The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression e;
@@
-if (e)
of_node_put(e);
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Julia Lawall [Fri, 8 Aug 2014 10:07:45 +0000 (12:07 +0200)]
powerpc/fsl: fsl_soc: delete unneeded test before of_node_put
Of_node_put supports NULL as its argument, so the initial test is not
necessary.
Suggested by Uwe Kleine-König.
The semantic patch that fixes this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression e;
@@
-if (e)
of_node_put(e);
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Julia Lawall [Fri, 8 Aug 2014 10:07:44 +0000 (12:07 +0200)]
powerpc/4xx/cpm: delete unneeded test before of_node_put
Simplify the error path to avoid calling of_node_put when it is not needed.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Anton Blanchard [Sun, 2 Nov 2014 21:34:01 +0000 (08:34 +1100)]
powerpc/pseries: Quieten relocation on exceptions warning
The H_SET_MODE hcall returns H_P2 if a function is not implemented
and all callers should handle this case.
The call to enable relocation on exceptions currently prints an error
message if the feature is not implemented. While H_SET_MODE was
first introduced on POWER8 (which has relocation on exceptions), it
has been now added on some POWER7 configurations (which does not).
Check for H_P2 and print an informational message instead.
Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The ibm,pcie-link-speed-stats isn't mandatory, so we shouldn't print
a high priority error message when missing. One example where we see
this is QEMU.
Reduce it to pr_debug.
Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Anton Blanchard [Fri, 31 Oct 2014 03:47:25 +0000 (14:47 +1100)]
powerpc: Don't use local named register variable in current_thread_info
LLVM doesn't support local named register variables and is unlikely
to. current_thread_info is using one, fix it by moving it out and
calling it __current_r1().
I gave it a bit of an obscure name because we don't want anyone else
using it - they should use current_stack_pointer(). This specific
case is performance critical and we can't afford to call a function
to get it. Furthermore it isn't important to know exactly where in
the stack we are since we mask the lower bits.
Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The build is broken with CONFIG_PPC32=y, CONFIG_FB_VGA16=y and
CONFIG_VGA_CONSOLE=n.
The problem is that vgacon_remap_base is not defined. It's used in:
#define VGA_MAP_MEM(x,s) (x + vgacon_remap_base)
Which is used in the vga16fb.c code.
Digging down it seems vgacon_remap_base is never initialised. It used to
be, back in arch/ppc (pplus.c and prep_setup.c), but none of that code
ever made it to arch/powerpc.
So given it's been unused for >6 years, remove it.
Whether vga16fb.c works on 32-bit is another question, but this patch
shouldn't affect it.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Anton Blanchard [Thu, 30 Oct 2014 04:43:43 +0000 (15:43 +1100)]
powerpc/jump_label: Use HAVE_JUMP_LABEL
Commit d4fe0965e208 ("powerpc/jump_label: use HAVE_JUMP_LABEL?")
missed a few conversions. Change the remaining uses of
CONFIG_JUMP_LABEL to HAVE_JUMP_LABEL.
Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
On some platforms a 5 second timeout during boot might be quite long, so
make it configurable. Run the loop at least once to let the user stop
the boot by holding a key pressed. If the timeout is set to 0, don't
wait for input, which can be used as a workaround if the boot hangs on
random data coming in on the serial port.
Signed-off-by: Simon Kagstrom <simon.kagstrom@netinsight.net>
[mpe: Changelog wording & whitespace] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Anton Blanchard [Wed, 17 Sep 2014 07:07:04 +0000 (17:07 +1000)]
powerpc/ftrace: simplify prepare_ftrace_return
Instead of passing in the stack address of the link register
to be modified, just pass in the old value and return the
new value and rely on ftrace_graph_caller to do the
modification.
This removes the exception handling around the stack update -
it isn't needed and we weren't consistent about it. Later on
we would do an unprotected modification:
if (!ftrace_graph_entry(&trace)) {
*parent = old;
Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Anton Blanchard [Wed, 17 Sep 2014 07:07:03 +0000 (17:07 +1000)]
powerpc/ftrace: Remove mod_return_to_handler
mod_return_to_handler is the same as return_to_handler, except
it handles the change of the TOC (r2). Add this into
return_to_handler and remove mod_return_to_handler.
Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Anton Blanchard [Wed, 17 Sep 2014 12:15:37 +0000 (22:15 +1000)]
powerpc: make __ffs return unsigned long
I'm seeing a build warning in mm/nobootmem.c after removing
bootmem:
mm/nobootmem.c: In function '__free_pages_memory':
include/linux/kernel.h:713:17: warning: comparison of distinct pointer types lacks a cast [enabled by default]
(void) (&_min1 == &_min2); \
^
mm/nobootmem.c:90:11: note: in expansion of macro 'min'
order = min(MAX_ORDER - 1UL, __ffs(start));
^
The rest of the worlds seems to define __ffs as returning unsigned long,
so lets do that.
Signed-off-by: Anton Blanchard <anton@samba.org> Tested-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Anton Blanchard [Wed, 17 Sep 2014 12:15:36 +0000 (22:15 +1000)]
powerpc: Move sparse_init() into initmem_init
We did part of sparse initialisation in setup_arch and part in
initmem_init. Put them together.
Signed-off-by: Anton Blanchard <anton@samba.org> Tested-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Anton Blanchard [Wed, 17 Sep 2014 12:15:35 +0000 (22:15 +1000)]
powerpc: Remove superfluous bootmem includes
Lots of places included bootmem.h even when not using bootmem.
Signed-off-by: Anton Blanchard <anton@samba.org> Tested-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Anton Blanchard [Wed, 17 Sep 2014 12:15:34 +0000 (22:15 +1000)]
powerpc: Remove some old bootmem related comments
Now bootmem is gone from powerpc we can remove comments mentioning it.
Signed-off-by: Anton Blanchard <anton@samba.org> Tested-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Anton Blanchard [Wed, 17 Sep 2014 12:15:33 +0000 (22:15 +1000)]
powerpc: Remove bootmem allocator
At the moment we transition from the memblock alloctor to the bootmem
allocator. Gitting rid of the bootmem allocator removes a bunch of
complicated code (most of which I owe the dubious honour of being
responsible for writing).
Signed-off-by: Anton Blanchard <anton@samba.org> Tested-by: Emil Medve <Emilian.Medve@Freescale.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Emil Medve [Thu, 6 Nov 2014 15:48:13 +0000 (09:48 -0600)]
powerpc/dts: Add node(s) for the platform PLL
Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Change-Id: If76cd705a01813abe53396c1486bc13c4289ee92 Signed-off-by: Scott Wood <scottwood@freescale.com>
Emil Medve [Thu, 6 Nov 2014 15:48:12 +0000 (09:48 -0600)]
dt/bindings: qoriq-clock: Add binding for the platform PLL
Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Change-Id: I7950afa9650d15ec7ce2cca89bb2a1e38586d4a5 Signed-off-by: Scott Wood <scottwood@freescale.com>
Emil Medve [Thu, 6 Nov 2014 15:48:11 +0000 (09:48 -0600)]
powerpc/dts: Factorize the clock control node
Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com>
Change-Id: I25ce24a25862b4ca460164159867abefe00ccdd1 Signed-off-by: Scott Wood <scottwood@freescale.com>
Igal Liberman [Thu, 30 Oct 2014 09:15:47 +0000 (11:15 +0200)]
powerpc/fsl: Added rcw registers to global utility registers
The RCW registers are required for the future clock binding implementation.
Signed-off-by: Igal Liberman <Igal.Liberman@freescale.com>
Change-Id: Ic36dd8bc2959aa7f97fb6fd7bbb8420822fef0a9 Signed-off-by: Scott Wood <scottwood@freescale.com>
Ashish Kumar [Tue, 7 Oct 2014 12:34:36 +0000 (18:04 +0530)]
powerpc/mpc85xx: Remove SPI and NAND partition from bsc9131rdb.dtsi
* Run "mtdparts default" on u-boot to create dynamic partitions
* Or use dynamic mtd partition with the help of bootargs in u-boot
Append bootargs with:
"mtdparts=ff800000.flash:1m(nand_uboot),512K(nand_dtb),8m(nand_kernel),-(fs);\
spiff707000.0:1m(spi_uboot),4m(spi_kernel),512k(spi_dtb),-(fs)'"
Signed-off-by: Ashish Kumar <Ashish.Kumar@freescale.com> Signed-off-by: Scott Wood <scottwood@freescale.com>
Paul Bolle [Wed, 24 Sep 2014 08:06:19 +0000 (10:06 +0200)]
powerpc/8xx: Remove Kconfig symbol FADS
Commit 39eb56da2b53 ("pcmcia: Remove m8xx_pcmcia driver") removed the
only driver that used CONFIG_FADS. Setting the Kconfig symbol FADS is
pointless since that commit. Remove it.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Scott Wood <scottwood@freescale.com>
powerpc/8xx: Invalidate non present TLB as early as possible
8xx sometimes need to load a invalid/non-present TLBs in
it DTLB asm handler.
These must be invalidated separaly as linux mm doesn't.
Commit 5efab4a02c89c252fb4cce097aafde5f8208dbfe was invalidating them in
arch/powerpc/mm/fault.c.
This patch does the invalidation earlier in order to free the TLB as soon as
possible. This also has the advantage of removing some 8xx specific code from
fault.c
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Scott Wood <scottwood@freescale.com>
As we are not using anymore DAR to save registers, it is now available for
saving the r3 register used for CPU6 ERRATA handling. Therefore we can
remove the major hack which was to use memory location 0 to save r3.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Scott Wood <scottwood@freescale.com>
powerpc/8xx: Don't restore regs to save them again.
There is not need to restore r10, r11 and cr registers at this end of ITLBmiss
handler as they are saved again to the same place in ITLBError handler we are
jumping to.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Scott Wood <scottwood@freescale.com>
Value 0x00f0 is used to force bits in TLB level 2 entry. This value is linked
to the page size and will vary when we change the page size. Lets define a const
for it in order to have it at only one place.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Scott Wood <scottwood@freescale.com>
Use M_TW instead of M_TWB for storing Level 1 table address as M_TWB requires
4k aligned tables, which is only the case with 4k pages.
Consequently, we have to calculate the level 1 table index by ourselves.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Scott Wood <scottwood@freescale.com>
powerpc/8xx: exception InstructionAccess does not exist on MPC8xx
Exception InstructionAccess does not exist on MPC8xx. No need to branch there from somewhere else.
Handling can be done directly in InstructionTLBError Exception.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr> Signed-off-by: Scott Wood <scottwood@freescale.com>
Anton Blanchard [Tue, 14 Oct 2014 11:17:47 +0000 (22:17 +1100)]
powerpc: Remove ppc_md.remove_memory
We have an extra level of indirection on memory hot remove which is not
matched on memory hot add. Memory hotplug is book3s only, so there is
no need for it.
This also enables means remove_memory() (ie memory hot unplug) works
on powernv.
Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Anton Blanchard [Tue, 14 Oct 2014 01:24:35 +0000 (12:24 +1100)]
powerpc: Remove ppc64_boot_msg
ppc64_boot_msg is meant to be a boot debug aid, but
is only used in one spot. Get rid of it, and save
ourseleves a couple of lines in the kernel log
buffer.
Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
projects / linux-beck.git / log