Olof Johansson [Thu, 13 Sep 2012 07:19:37 +0000 (00:19 -0700)]
Merge branch 'next/fixes-non-critical' into for-next
next/fixes-non-critical was rebuilt to do a fresh pull of the base branch
of it, but the only _file contents_ delta is the additional patch on
that branch.
Because of that, just pull in the new one now, even though it messes up
history a bit. We'll clean up when we rebuild for-next next time.
Olof Johansson [Wed, 5 Sep 2012 05:38:11 +0000 (22:38 -0700)]
Merge tag 'ux500-core-updates' of http://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson into next/fixes-non-critical
This is three ux500 core updates with no direct relation
but grouped in a pull request:
- Set the proper GIC flags to mask when suspended and
skip wake.
- Fix a build error introduced from the PMU patch set
- Provide a fixed regulator for the Snowball when not
using DT.
* tag 'ux500-core-updates' of http://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-stericsson:
ARM: ux500: Provide SMSC911x fixed-regulator when not booting DT
ARM: ux500: Fix build error due to missing include of asm/pmu.h in cpu-db8500.c
ARM: ux500: set proper GIC flags
Olof Johansson [Tue, 24 Jul 2012 14:58:51 +0000 (16:58 +0200)]
Merge branch 'ofdeviceiddata' of git://git.pengutronix.de/git/ukl/linux into next/fixes-non-critical
From "Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>:
this is the 2nd version of this series whose goal is to make struct
of_device_id.data const. Conceptually a driver must not modify the data
contained there so making it const is the right thing.
v1 of this series was sent with Message-id: 1342182734-321-1-git-send-email-y. Changes since then are:
- powerpc fixes
- several new consts that were found by Arnd that are possible after
patch 19.
Arnd suggested to take this series via arm-soc late for 3.6 in one go
because patch 19 depends on the former patches but is a precondition to
the latter and it fixes a few warnings. So getting it in via the
respective maintainer trees would need a much bigger coordination
effort. That means I prefer getting Acks over you taking the patch.
Vinod Koul already took
dmaengine: at_hdmac: add a few const qualifiers
that is in next-20120723 as 7fd63ccdad72 now. Vinod, I don't follow your
pull requests, but assuming you didn't let it already pull for 3.6 I
suggest you drop it from your queue and I just take your Ack.
This series was build tested for arm (all defconfigs) and powerpc (all
defconfigs and an allyesconfig) and grep didn't find more issues. As
before it introduces a warning in drivers/regulator/twl-regulator.c.
This driver does modify its .of_match_table when a device is bound which
doesn't fits the concept of independant devices. Arnd noticed another
new warning in drivers/scsi/qlogicpti.c that isn't that easy to resolve,
because the pointer to (now) const data is passed as first argument to
scsi_host_alloc. To fix that properly struct Scsi_Host.hostt needs to
get a const, too. Alternatively I could introduce a cast removing the
const, but I don't like that.
* 'ofdeviceiddata' of git://git.pengutronix.de/git/ukl/linux: (25 commits)
dma: tegra: make data used as *of_device_id.data const
can: mpc5xxx_can: make data used as *of_device_id.data const
macintosh/mediabay: make data used as *of_device_id.data const
i2c/mpc: make data used as *of_device_id.data const
mfd/da9052: make i2c_device_id array const
powerpc/fsl_msi: drop unneeded cast to non-const pointer
gpio/gpio-omap: make platformdata used as *of_device_id.data const
of: add const to struct *of_device_id.data
dma: tegra: make tegra_dma.chip_data a pointer to const data
watchdog/mpc8xxx: add a const qualifier
powerpc/celleb_pci: add a const qualifier
powerpc/fsl_msi: add a const qualifier
powerpc/83xx: add a const qualifier
macintosh/mediabay: add a const qualifier
mmc/omap_hsmmc: add a const qualifier
i2c/mpc: add a const qualifier
i2c/i2c-omap: add a const qualifier
gpio/mpc8xxx: add a const qualifier
gpio/gpio-omap.c: add a const qualifier
misc/atmel_tc: make atmel_tc.tcb_config member point to const data
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[olof: repulled a v3 version of the branch that rebased to add some more
acked-bys and added one more patch on top for tegra] Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Thu, 13 Sep 2012 06:17:11 +0000 (23:17 -0700)]
Merge tag 'imx-dt-3.7' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/dt
- All imx53 board files are removed by the equal device tree support
- The efikamx board files are removed to ease device tree migration
- Remove dummy pinctrl state by setting up pinctrl in device tree
* tag 'imx-dt-3.7' of git://git.linaro.org/people/shawnguo/linux-2.6: (28 commits)
ARM: imx6q-sabrelite: Rename 'pinctrl_gpio_hog'
ARM: imx51: decouple device tree boot from board files
ARM: imx51: build in pinctrl support
ARM: dts: imx51-babbage: add pinctrl settings
ARM: imx53: remove unneeded files and functions
ARM: imx53: support device tree boot only
ARM: imx53: decouple device tree boot from board files
ARM: imx53: build in pinctrl support
ARM: dts: imx53-smd: add pinctrl settings
ARM: dts: imx53-evk: add pinctrl settings
ARM: dts: imx53-ard: add pinctrl settings
ARM: dts: imx53-qsb: add pinctrl settings
ARM: imx6q: remove dummy pinctrl state
ARM: dts: imx6q-sabresd: add pinctrl settings
ARM: dts: imx6q-arm2: add pinctrl for uart and enet
ARM: dts: imx6q-sabrelite: add pinctrl for usdhc and enet
ARM: dts: imx6q: sort iomuxc sub-nodes in name
ARM: dts: imx6q: name iomuxc sub-nodes following pin function
ARM: dts: imx6q: improve indentation for fsl,pins
ARM: efikamx: remove Genesi Efika MX platform files from the tree
...
Resolved trivial context conflict in arch/arm/boot/dts/imx51-babbage.dts
Olof Johansson [Thu, 13 Sep 2012 06:09:13 +0000 (23:09 -0700)]
Merge branch 'next/defconfig' into for-next
* next/defconfig:
ARM: mxs_defconfig: Add SPI and LRADC support
ARM: mxs_defconfig: Add framebuffer support
ARM: mxs_defconfig: Add LED, PWM and MTD_CHAR support
ARM: mxs_defconfig: Enable USB host
Olof Johansson [Thu, 13 Sep 2012 06:08:59 +0000 (23:08 -0700)]
Merge tag 'mxs-defconfig-3.7' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/defconfig
A collection of mxs_defconfig updates for 3.7.
* tag 'mxs-defconfig-3.7' of git://git.linaro.org/people/shawnguo/linux-2.6:
ARM: mxs_defconfig: Add SPI and LRADC support
ARM: mxs_defconfig: Add framebuffer support
ARM: mxs_defconfig: Add LED, PWM and MTD_CHAR support
ARM: mxs_defconfig: Enable USB host
Olof Johansson [Thu, 13 Sep 2012 06:04:41 +0000 (23:04 -0700)]
Merge branch 'next/dt' into for-next
* next/dt:
clk: mxs: replace imx23 clk_register_clkdev with clock DT lookup
clk: mxs: replace imx28 clk_register_clkdev with clock DT lookup
clk: add of_clk_src_onecell_get() support
clk: ux500: Define smp_twd clock for u8500
mfd: dbx500: Provide a more accurate smp_twd clock
clk: ux500: Support for prmcu_rate clock
clk: Provide option for clk_get_rate to issue hw for new rate
clock: max77686: Add driver for Maxim 77686 32Khz crystal oscillator.
ARM: ux500: Switch to use common clock framework
clk: ux500: Clock definitions for u8500
clk: ux500: First version of clock definitions for ux500
clk: ux500: Adapt PRCMU and PRCC clocks for common clk
clk: versatile: make config option boolean
clk: add Loongson1B clock support
arm: mmp: make all SOCs use common clock by default
clk: mmp: add clock definition for mmp2
clk: mmp: add clock definition for pxa910
clk: mmp: add clock definition for pxa168
clk: mmp: add mmp specific clocks
clk: convert ARM RealView to common clk
Resolving trivial modify/remove conflict in arch/arm/mach-ux500/clock.c
Olof Johansson [Thu, 13 Sep 2012 06:03:37 +0000 (23:03 -0700)]
Merge branch 'clk-3.7' of git://git.linaro.org/people/mturquette/linux into next/dt
* 'clk-3.7' of git://git.linaro.org/people/mturquette/linux:
clk: add of_clk_src_onecell_get() support
clk: ux500: Define smp_twd clock for u8500
mfd: dbx500: Provide a more accurate smp_twd clock
clk: ux500: Support for prmcu_rate clock
clk: Provide option for clk_get_rate to issue hw for new rate
clock: max77686: Add driver for Maxim 77686 32Khz crystal oscillator.
ARM: ux500: Switch to use common clock framework
clk: ux500: Clock definitions for u8500
clk: ux500: First version of clock definitions for ux500
clk: ux500: Adapt PRCMU and PRCC clocks for common clk
clk: versatile: make config option boolean
clk: add Loongson1B clock support
arm: mmp: make all SOCs use common clock by default
clk: mmp: add clock definition for mmp2
clk: mmp: add clock definition for pxa910
clk: mmp: add clock definition for pxa168
clk: mmp: add mmp specific clocks
clk: convert ARM RealView to common clk
clk: prima2: move from arch/arm/mach to drivers/clk
ARM: PRIMA2: convert to common clk and finish full clk tree
Olof Johansson [Thu, 13 Sep 2012 05:47:07 +0000 (22:47 -0700)]
Merge tag 'mxs-dt-3.7' of git://git.linaro.org/people/shawnguo/linux-2.6 into next/dt
- Remove all board files and make mach-mxs a DT-only platform
- Some dts file formatting and style fixing
- DTS update for additional boards and devices
* tag 'mxs-dt-3.7' of git://git.linaro.org/people/shawnguo/linux-2.6: (28 commits)
ARM: dts: cfa10049: Add the 74HC595 gpio expanders
ARM: dts: m28evk: Fix MMC WP pin being inverted
ARM: dts: cfa10049: Add SSP3 to the 10049 board
ARM: dts: mxs: Add missing address and size cells in SSP nodes
ARM: mx28evk: Add I2C EEPROM support
ARM: dts: mxs: Enable USB1 Host on the CFA-10049 expansion board
ARM: dts: mxs: Add the second I2C adapter to the CFA10049 expansion board
ARM: dts: mxs: Add I2C1 muxing options for imx28
ARM: mx28evk: Add LRADC support
ARM: mx28evk: Add SPI flash support
ARM: mxs: Update DENX M28 machine and dts file
ARM: mx28: Add USB PHY overcurrent pinmux
ARM: mx28: Add SPI 2 pinmux into imx28.dtsi
ARM: dts: mxs: Add pwm4 muxing options for imx28
ARM: dts: mxs: Add alternative I2C muxing options for imx28
ARM: olinuxino: Add gpio-led support
ARM: mxs: Let mmc0 pin detect be generic
ARM: mxs: Rename 'hog-gpios'
ARM: mxs: remove iomux driver
ARM: mxs: remove platform device codes
...
Commit 70adc3f32adc2fb90b0107c020678588e4cf9f51
"ARM: ks8695: merge the timer header into the timer driver"
accidentally broke the ks8695 watchdog since it was using
the timer registers in watchdog mode.
Perform the same operation here: push the registers down
into the driver, so it is self-contained, and we can keep
depopulating the <mach/*> namespace.
Reported-by: Olof Johansson <olof@lixom.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Olof Johansson <olof@lixom.net>
Shawn Guo [Wed, 22 Aug 2012 13:36:28 +0000 (21:36 +0800)]
ARM: imx6q: replace clk_register_clkdev with clock DT lookup
It really becomes an maintenance issue that every time a device needs
to look up (clk_get) a clock we have to patch kernel clock file to call
clk_register_clkdev for that clock.
Since clock DT support which is meant to resolve clock lookup in device
tree is in place, the patch moves imx6q client devices' clock lookup
over to device tree, so that any new lookup to be added at later time
can just get done in DT instead of kernel.
Fabio Estevam [Fri, 24 Aug 2012 15:24:50 +0000 (12:24 -0300)]
ARM: imx6q-sabrelite: Rename 'pinctrl_gpio_hog'
'pinctrl_gpio_hog' is used to setup the pin functions, and it is not
neccesarily used only for GPIO pins, so remove 'gpio' from its name
to describe a more generic term.
Shawn Guo [Mon, 13 Aug 2012 13:13:10 +0000 (21:13 +0800)]
ARM: imx51: decouple device tree boot from board files
Now, imx51 device tree kernel calls pinctrl to set up pins. The
function used to hook up non-DT pin setup is not needed for DT boot
any more. Remove it from DT image.
Shawn Guo [Mon, 13 Aug 2012 11:55:37 +0000 (19:55 +0800)]
ARM: imx51: build in pinctrl support
With the imx51 DT board having pinctrl setup define in device tree,
it's time to remove dummy pinctrl state and build in the real imx51
pinctrl support.
Shawn Guo [Sun, 12 Aug 2012 15:21:39 +0000 (23:21 +0800)]
ARM: imx53: support device tree boot only
With device tree kernel provides the equal support as those imx53 board
files, it's time to remove the board files and get imx53 support device
tree only.
Shawn Guo [Sun, 12 Aug 2012 14:43:22 +0000 (22:43 +0800)]
ARM: imx53: decouple device tree boot from board files
Now, imx53 device tree kernel calls pinctrl to set up pins. The
functions used to hook up non-DT pin setup is not needed for DT boot
any more. Remove them from DT image.
Shawn Guo [Sun, 12 Aug 2012 14:33:43 +0000 (22:33 +0800)]
ARM: imx53: build in pinctrl support
As all imx53 boards booting from device tree have pinctrl set up in dts,
it's time to remove the dummy pinctrl state and build in the real imx53
pinctrl support.
Shawn Guo [Fri, 10 Aug 2012 09:17:56 +0000 (17:17 +0800)]
ARM: dts: imx6q: improve indentation for fsl,pins
Change the indentation for property fsl,pins a little bit, so that
the first and the last line get the same indentation with all other
lines. Then it will be easier to copy and past any of these lines.
Laxman Dewangan [Wed, 29 Aug 2012 08:31:18 +0000 (10:31 +0200)]
dma: tegra: make data used as *of_device_id.data const
Since of_device_id.data is declared as a pointer to const data a few
more consts can be added in this driver.
[ukl: split Laxman's patch to prevent warnings in the middle of the
series. Original patch was sent with msgid 1346217447-19730-1-git-send-email-ldewangan@nvidia.com]
Laxman Dewangan [Wed, 29 Aug 2012 08:23:07 +0000 (10:23 +0200)]
dma: tegra: make tegra_dma.chip_data a pointer to const data
This prepares *of_device_id.data becoming const. Without this change
the following warning would occur:
drivers/dma/tegra20-apb-dma.c: In function 'tegra_dma_probe':
drivers/dma/tegra20-apb-dma.c:1210:9: warning: assignment discards 'const' qualifier from pointer target type [enabled by default]
[ukl: split Laxman's patch to prevent warnings in the middle of the
series. Original patch was sent with msgid 1346217447-19730-1-git-send-email-ldewangan@nvidia.com]
Arnd Bergmann [Mon, 21 May 2012 19:57:39 +0000 (21:57 +0200)]
watchdog/mpc8xxx: add a const qualifier
This prepares *of_device_id.data becoming const. Without this change
the following warning would occur:
drivers/watchdog/mpc8xxx_wdt.c: In function 'mpc8xxx_wdt_probe':
drivers/watchdog/mpc8xxx_wdt.c:203:11: warning: assignment discards 'const' qualifier from pointer target type [enabled by default]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[ukl: split Arnd's patch by driver and add changelog] Acked-by: Wim Van Sebroeck <wim@iguana.be> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Uwe Kleine-König [Mon, 21 May 2012 19:57:39 +0000 (21:57 +0200)]
powerpc/celleb_pci: add a const qualifier
This prepares *of_device_id.data becoming const. Without this change
the following warning would occur:
arch/powerpc/platforms/cell/celleb_pci.c: In function 'celleb_setup_phb':
arch/powerpc/platforms/cell/celleb_pci.c:485:11: warning: assignment discards 'const' qualifier from pointer target type [enabled by default]
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Uwe Kleine-König [Mon, 21 May 2012 19:57:39 +0000 (21:57 +0200)]
powerpc/fsl_msi: add a const qualifier
This prepares *of_device_id.data becoming const. Without this change
the following warning would occur:
arch/powerpc/sysdev/fsl_msi.c: In function 'fsl_of_msi_probe':
arch/powerpc/sysdev/fsl_msi.c:379:11: error: assignment discards 'const' qualifier from pointer target type [-Werror]
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Uwe Kleine-König [Mon, 21 May 2012 19:57:39 +0000 (21:57 +0200)]
powerpc/83xx: add a const qualifier
This prepares *of_device_id.data becoming const. Without this change
the following warning would occur:
arch/powerpc/platforms/83xx/suspend.c: In function 'pmc_probe':
arch/powerpc/platforms/83xx/suspend.c:336:7: error: assignment discards 'const' qualifier from pointer target type [-Werror]
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Uwe Kleine-König [Mon, 21 May 2012 19:57:39 +0000 (21:57 +0200)]
macintosh/mediabay: add a const qualifier
This prepares *of_device_id.data becoming const. Without this change
the following warning would occur:
drivers/macintosh/mediabay.c: In function 'media_bay_attach':
drivers/macintosh/mediabay.c:589:11: warning: assignment discards 'const' qualifier from pointer target type [enabled by default]
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Uwe Kleine-König [Mon, 21 May 2012 19:57:39 +0000 (21:57 +0200)]
mmc/omap_hsmmc: add a const qualifier
This prepares *of_device_id.data becoming const. Without this change
the following warning would occur:
drivers/mmc/host/omap_hsmmc.c: In function 'omap_hsmmc_probe':
drivers/mmc/host/omap_hsmmc.c:1808: warning: initialization discards qualifiers from pointer target type
Acked-by: Venkatraman S <svenkatr@ti.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Uwe Kleine-König [Mon, 21 May 2012 19:57:39 +0000 (21:57 +0200)]
i2c/mpc: add a const qualifier
This prepares *of_device_id.data becoming const. Without this change
the following warning would occur:
drivers/i2c/busses/i2c-mpc.c: In function 'fsl_i2c_probe':
drivers/i2c/busses/i2c-mpc.c:650:31: warning: initialization discards 'const' qualifier from pointer target type [enabled by default]
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Uwe Kleine-König [Mon, 21 May 2012 19:57:39 +0000 (21:57 +0200)]
i2c/i2c-omap: add a const qualifier
This prepares *of_device_id.data becoming const. Without this change
the following warning would occur:
drivers/i2c/busses/i2c-omap.c: In function 'omap_i2c_probe':
drivers/i2c/busses/i2c-omap.c:1025: warning: assignment discards qualifiers from pointer target type
Reviewed-by: Shubhrajyoti D <shubhrajyoti@ti.com> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Uwe Kleine-König [Mon, 21 May 2012 19:57:39 +0000 (21:57 +0200)]
gpio/mpc8xxx: add a const qualifier
This prepares *of_device_id.data becoming const. Without this change
the following warning would occur:
drivers/gpio/gpio-mpc8xxx.c: In function 'mpc8xxx_add_controller':
drivers/gpio/gpio-mpc8xxx.c:360:30: warning: assignment discards 'const' qualifier from pointer target type [enabled by default]
Uwe Kleine-König [Mon, 21 May 2012 19:57:39 +0000 (21:57 +0200)]
gpio/gpio-omap.c: add a const qualifier
This prepares *of_device_id.data becoming const. Without this change
the following warning would occur:
drivers/gpio/gpio-omap.c: In function 'omap_gpio_probe':
drivers/gpio/gpio-omap.c:1060: warning: assignment discards qualifiers from pointer target type
Uwe Kleine-König [Mon, 21 May 2012 19:54:06 +0000 (21:54 +0200)]
ARM: cache-l2x0: add a const qualifier
This prepares *of_device_id.data becoming const. Without this change the
following warning would occur:
arch/arm/mm/cache-l2x0.c: In function 'l2x0_of_init':
arch/arm/mm/cache-l2x0.c:573:7: warning: assignment discards 'const' qualifier from pointer target type [enabled by default]
Uwe Kleine-König [Mon, 21 May 2012 19:57:39 +0000 (21:57 +0200)]
serial/mpc52xx_uart: add a const qualifier
This prepares *of_device_id.data becoming const. Without this change
the following warning would occur:
drivers/tty/serial/mpc52xx_uart.c: In function 'mpc52xx_uart_of_enumerate':
drivers/tty/serial/mpc52xx_uart.c:1440:11: warning: assignment discards 'const' qualifier from pointer target type [enabled by default]
Shawn Guo [Wed, 22 Aug 2012 13:36:30 +0000 (21:36 +0800)]
clk: mxs: replace imx23 clk_register_clkdev with clock DT lookup
It really becomes a maintenance issue that every time a device needs
to look up (clk_get) a clock we have to patch kernel clock file to call
clk_register_clkdev for that clock.
Since clock DT support which is meant to resolve clock lookup in device
tree is in place, the patch moves imx23 client devices' clock lookup
over to device tree, so that any new lookup to be added at later time
can just get done in DT instead of kernel.
Shawn Guo [Wed, 22 Aug 2012 13:36:29 +0000 (21:36 +0800)]
clk: mxs: replace imx28 clk_register_clkdev with clock DT lookup
It really becomes a maintenance issue that every time a device needs
to look up (clk_get) a clock we have to patch kernel clock file to call
clk_register_clkdev for that clock.
Since clock DT support which is meant to resolve clock lookup in device
tree is in place, the patch moves imx28 client devices' clock lookup
over to device tree, so that any new lookup to be added at later time
can just get done in DT instead of kernel.
- Remove all board files and make mach-mxs a DT-only platform
- Some dts file formatting and style fixing
- DTS update for additional boards and devices
Merge branch 'fixes-for-3.6' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping
Pull DMA-mapping fixes from Marek Szyprowski:
"Another set of fixes for ARM dma-mapping subsystem.
Commit e9da6e9905e6 replaced custom consistent buffer remapping code
with generic vmalloc areas. It however introduced some regressions
caused by limited support for allocations in atomic context. This
series contains fixes for those regressions.
For some subplatforms the default, pre-allocated pool for atomic
allocations turned out to be too small, so a function for setting its
size has been added.
Another set of patches adds support for atomic allocations to
IOMMU-aware DMA-mapping implementation.
The last part of this pull request contains two fixes for Contiguous
Memory Allocator, which relax too strict requirements."
* 'fixes-for-3.6' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
ARM: dma-mapping: IOMMU allocates pages from atomic_pool with GFP_ATOMIC
ARM: dma-mapping: Introduce __atomic_get_pages() for __iommu_get_pages()
ARM: dma-mapping: Refactor out to introduce __in_atomic_pool
ARM: dma-mapping: atomic_pool with struct page **pages
ARM: Kirkwood: increase atomic coherent pool size
ARM: DMA-Mapping: print warning when atomic coherent allocation fails
ARM: DMA-Mapping: add function for setting coherent pool size from platform code
ARM: relax conditions required for enabling Contiguous Memory Allocator
mm: cma: fix alignment requirements for contiguous regions
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input subsystem updates from Dmitry Torokhov.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: wacom - add support for EMR on Cintiq 24HD touch
Input: i8042 - add Gigabyte T1005 series netbooks to noloop table
Input: imx_keypad - reset the hardware before enabling
Input: edt-ft5x06 - fix build error when compiling wthout CONFIG_DEBUG_FS
Olof Johansson [Sat, 8 Sep 2012 03:17:20 +0000 (20:17 -0700)]
Merge branch 'next/boards' into for-next
* next/boards:
ARM: ks8695: add board support for the OpenGear boards based on the KS8695
ARM: ks8695: add board support for the SnapGear boards based on the KS8695
Olof Johansson [Sat, 8 Sep 2012 03:17:07 +0000 (20:17 -0700)]
Merge branch 'ks8695/boards' into next/boards
* ks8695/boards:
ARM: ks8695: add board support for the OpenGear boards based on the KS8695
ARM: ks8695: add board support for the SnapGear boards based on the KS8695
Shawn Guo [Wed, 22 Aug 2012 13:36:27 +0000 (21:36 +0800)]
clk: add of_clk_src_onecell_get() support
For those SoCs that have hundreds of clock outputs, their clock
DT bindings could reasonably define #clock-cells as 1 and require
the client device specify the index of the clock it consumes in the
cell of its "clocks" phandle.
Add a generic of_clk_src_onecell_get() function for this purpose.
Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Reviewed-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Mike Turquette <mturquette@linaro.org>
Olof Johansson [Fri, 7 Sep 2012 22:11:23 +0000 (15:11 -0700)]
Merge branch 'next/soc' into for-next
* next/soc:
ARM: LPC32xx: Remove board specific GPIO init
ARM: LPC32xx: Provide DMA filter callbacks via platform data
ARM: LPC32xx: Use handle_edge_irq() callback on edge type irqs
Olof Johansson [Fri, 7 Sep 2012 22:03:21 +0000 (15:03 -0700)]
Merge tag 'omap-fixes-for-v3.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Fixes for timer, sram, memory corruption, and one board file that affect
booting on various omaps. Then some PM related fixes for reset, sleep
and wakeup.
* tag 'omap-fixes-for-v3.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP4: Fix array size for irq_target_cpu
ARM: OMAP4: hwmod data: temporarily comment out data for the sl2if IP block
ARM: OMAP: hwmod code: Disable module when hwmod enable fails
ARM: OMAP3: hwmod data: fix iva2 reset info
ARM: OMAP3xxx: clockdomain: fix software supervised wakeup/sleep
ARM: OMAP2+: am33xx: Fix the timer fck clock naming convention
ARM: OMAP: Config fix for omap3-touchbook board
ARM: OMAP: sram: skip the first 16K on OMAP3 HS
ARM: OMAP: sram: fix OMAP4 errata handling
ARM: OMAP: timer: obey the !CONFIG_OMAP_32K_TIMER
Olof Johansson [Fri, 7 Sep 2012 22:02:20 +0000 (15:02 -0700)]
Merge branch 'lpc32xx/core' of git://git.antcom.de/linux-2.6 into next/soc
* 'lpc32xx/core' of git://git.antcom.de/linux-2.6:
ARM: LPC32xx: Remove board specific GPIO init
ARM: LPC32xx: Provide DMA filter callbacks via platform data
ARM: LPC32xx: Use handle_edge_irq() callback on edge type irqs
+ sync to 3.6-rc4
Olof Johansson [Fri, 7 Sep 2012 21:59:25 +0000 (14:59 -0700)]
Merge branch 'lpc32xx/dts' of git://git.antcom.de/linux-2.6 into next/dt
* 'lpc32xx/dts' of git://git.antcom.de/linux-2.6:
ARM: LPC32xx: Extend dts for EA3250 board
ARM: LPC32xx: Adjust device tree node to new standard num-cs
projects / karo-tx-linux.git / log