Marcin Wojtas [Wed, 21 Sep 2016 09:05:57 +0000 (11:05 +0200)]
clk: mvebu: fix setting unwanted flags in CP110 gate clock
Armada CP110 system controller comprises its own routine responsble
for registering gate clocks. Among others 'flags' field in
struct clk_init_data was not set, using a random values, which
may cause an unpredicted behavior.
This patch fixes the problem by resetting all fields of clk_init_data
before assigning values for all gated clocks of Armada 7k/8k SoCs family.
Fixes: d3da3eaef7f4 ("clk: mvebu: new driver for Armada CP110 system ...") Signed-off-by: Marcin Wojtas <mw@semihalf.com> CC: <stable@vger.kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Assume that if the oscillator is enabled (OSC32EN bit is present), the
delay has already elapsed as the bootloader probably waited for the
oscillator to settle. This could waste up to 1.2s.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
clk: at91: move slow clock controller clocks to sckc.c
Move all clocks related to the slow clock controller to sckc.c. This avoids
extern definitions and allows to remove sckc.h
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
[sboyd@codeaurora.org: Mark some functions static] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Lucas Stach [Fri, 16 Sep 2016 09:16:11 +0000 (11:16 +0200)]
clk: imx6: initialize GPU clocks
Initialize the GPU clock muxes to sane inputs. Until now they have
not been changed from their default values, which means that both
GPU3D shader and GPU2D core were fed by clock inputs whose rates
exceed the maximium allowed frequency of the cores by as much as
200MHz.
This fixes a severe GPU stability issue on i.MX6DL.
Cc: stable@vger.kernel.org Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Lucas Stach [Fri, 16 Sep 2016 09:16:10 +0000 (11:16 +0200)]
clk: imx6: fix i.MX6DL clock tree to reflect reality
The current clock tree only implements the minimal set of differences
between the i.MX6Q and the i.MX6DL, but that doesn't really reflect
reality.
Apply the following fixes to match the RM:
- DL has no GPU3D_SHADER_SEL/PODF, the shader domain is clocked by
GPU3D_CORE
- GPU3D_SHADER_SEL/PODF has been repurposed as GPU2D_CORE_SEL/PODF
- GPU2D_CORE_SEL/PODF has been repurposed as MLB_SEL/PODF
Cc: stable@vger.kernel.org Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This clock is present on BCM53573 devices (including BCM47189) that use
Cortex-A7. ILP is a part of PMU (Power Management Unit) multi-function
device so we use syscon (and regmap) for it.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Rob Herring <robh@kernel.org>
[sboyd@codeaurora.org: Remove 0 from clk_init_data to silence sparse] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
The zx296718 clock driver has a creative way of assigning the register
values for each clock, by initializing an __iomem pointer to an
offset and then later adding the base (from ioremap) on top
with a cast to u64. This fail on all 32-bit architectures during
compile testing:
drivers/clk/zte/clk-zx296718.c: In function 'top_clocks_init':
drivers/clk/zte/clk-zx296718.c:554:35: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
zx296718_pll_clk[i].reg_base += (u64)reg_base;
drivers/clk/zte/clk-zx296718.c:579:29: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
drivers/clk/zte/clk-zx296718.c:592:31: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
It would be nice to avoid all the casts, but I decided to simply
shut up the warnings by changing the type from u64 to uintptr_t,
which does the right thing in practice.
Markus Elfring [Wed, 14 Sep 2016 19:10:47 +0000 (21:10 +0200)]
clk/Renesas-MSTP: Use kmalloc_array() in cpg_mstp_clocks_init()
A multiplication for the size determination of a memory allocation
indicated that an array data structure should be processed.
Thus use the corresponding function "kmalloc_array".
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
clk: sunxi-ng: sun6i-a31: set CLK_SET_RATE_UNGATE for all PLLs
The PLLs have a "lock" bit in their configuration registers which
indicate if the PLL has locked on to the requested clock rate. We
check this bit in the .set_rate op. The PLL cannot lock on if it's
not running, which might be a false positive (warning).
Set the CLK_SET_RATE_UNGATE flag for all PLLs so whenever clk_set_rate
is called on them, they get enabled and the "lock" check is really
checking the PLL.
Fixes: c6e6c96d8fa6 ("clk: sunxi-ng: Add A31/A31s clocks") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
clk: sunxi-ng: sun6i-a31: Set CLK_SET_RATE_PARENT for display output clocks
The LCD controller and HDMI controller use the LCDx-CHy and HDMI clocks
to generate their dot clocks. To be able to generate a full range of
possible clock rates, the parent PLL clock rates should also be changed.
Fixes: c6e6c96d8fa6 ("clk: sunxi-ng: Add A31/A31s clocks") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Use an algorithm instead of a table to compute clocks for fs660c32
synthesizer.
During a video playback we need to adjust audio & video frequencies.
A table can't cover all HDMI resolutions and audio adjustment.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Acked-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
drivers: clk: st: Simplify clock binding of STiH4xx platforms
This patch reworks the clock binding to avoid too much detail in DT.
Now we have only compatible string per type of clock
(remark from Rob https://lkml.org/lkml/2016/5/25/492)
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Acked-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
drivers: clk: st: Remove stih415-416 clock support
STiH415 and STiH416 platforms are no longer used.
these platforms will be deprecated for the next kernel.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@st.com> Acked-by: Rob Herring <robh@kernel.org> Acked-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Stephen Boyd [Wed, 1 Jun 2016 21:31:22 +0000 (14:31 -0700)]
clk: at91: Migrate to clk_hw based registration and OF APIs
Now that we have clk_hw based provider APIs to register clks, we
can get rid of struct clk pointers in this driver, allowing us to
move closer to a clear split of consumer and provider clk APIs.
Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org> Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Tested-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Stephen Boyd [Wed, 1 Jun 2016 23:15:03 +0000 (16:15 -0700)]
clk: bcm2835: Migrate to clk_hw based registration and OF APIs
Now that we have clk_hw based provider APIs to register clks, we
can get rid of struct clk pointers while registering clks in
these drivers, allowing us to move closer to a clear split of
consumer and provider clk APIs.
Cc: Eric Anholt <eric@anholt.net> Cc: Martin Sperl <kernel@martin.sperl.org> Signed-off-by: Stephen Boyd <stephen.boyd@linaro.org>
Jon Mason [Thu, 29 Oct 2015 20:44:10 +0000 (16:44 -0400)]
clk: iproc: Make clocks visible options
Make the clocks visible options that can be selected by anyone. This
avoids the problems of:
1) Select is a reverse dependency and is hard for people to understand
and can sometimes be a pain to track down
2) Build coverage goes down because configs are hidden
3) Code bloat
Patch suggested by Stephen Boyd
Signed-off-by: Jon Mason <jonmason@broadcom.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
PMD clock is implemented for a single register field.
Output rate = parent_rate * (denominator - scale) / denominator
with
- denominator = bitmask of register field + 1
- scale = values of register field
For example, for bitmask is 0x7, denominator will be 8 and scale
will be computed and programmed accordingly.
Signed-off-by: Hoan Tran <hotran@apm.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Markus Elfring [Wed, 14 Sep 2016 18:26:05 +0000 (20:26 +0200)]
clk-kona-setup: Use kmalloc_array() in parent_process()
A multiplication for the size determination of a memory allocation
indicated that an array data structure should be processed.
Thus use the corresponding function "kmalloc_array".
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Reviewed-by: Alex Elder <elder@linaro.org>
[sboyd@codeaurora.org: Save a line] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This was clearly an accident, and since all other identifiers are
listed in the order in which they are defined, I'm changing the
first one to CLKID_GCLK_VENCI_INT0, making it all consistent again.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Fixes: e31a1900c1ff ("meson: clk: Add support for clock gates") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
We get 1 warning when building kernel with W=1:
drivers/clk/mmp/clk-mmp2.c:75:13: warning: no previous prototype for 'mmp2_clk_init' [-Wmissing-prototypes]
In fact, this function is declared in linux/clk/mmp.h,
so this patch add missing header dependencies.
Stephen Boyd [Wed, 14 Sep 2016 18:06:47 +0000 (11:06 -0700)]
Merge tag 'clk-v4.9-samsung' of git://linuxtv.org/snawrocki/samsung into clk-next
Pull samsung clk driver updates from Sylwester Nawrocki:
In addition to a few clean up and code consolidation patches this
includes:
- addition of sound subsystem related clocks for Exynos5410 SoC
(EPLL, PDMA) and support for "samsung,exynos5410-audss-clock"
compatible in the clk-exynos-audss driver,
- addition of DRAM controller related clocks for exynos5420,
- MAINTAINERS update adding Chanwoo Choi as the Samsung SoC
clock drivers co-maintainer.
* tag 'clk-v4.9-samsung' of git://linuxtv.org/snawrocki/samsung:
clk: samsung: Add support for EPLL on exynos5410
clk: samsung: clk-exynos-audss: Whitespace and debug trace cleanup
clk: samsung: clk-exynos-audss: Add exynos5410 compatible
clk: samsung: clk-exynos-audss: controller variant handling rework
clk: samsung: Use common registration function for pll2550x
clk: samsung: exynos5410: Expose the peripheral DMA gate clocks
clk: samsung: exynos5420: Add clocks for CMU_CDREX domain
clk: samsung: exynos5410: Use samsung_cmu_register_one() to simplify code
clk: samsung: exynos5260: Move struct samsung_cmu_info to init section
MAINTAINERS: Add myself as Samsung SoC clock drivers co-maintainer
clk: samsung: exynos5410: Add clock IDs for PDMA and EPLL clocks
clk: samsung: Add clock IDs for the CMU_CDREX (DRAM Express Controller)
Jean Delvare [Thu, 8 Sep 2016 21:28:29 +0000 (23:28 +0200)]
clk: sunxi-ng: Add hardware dependency
The sunxi-ng clock driver is useless for other architectures.
Signed-off-by: Jean Delvare <jdelvare@suse.de> Acked-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Maxime Ripard [Wed, 24 Aug 2016 12:10:15 +0000 (14:10 +0200)]
clk: sunxi-ng: Add A33 CCU support
This commit introduces the clocks found in the Allwinner A33 CCU.
Since this SoC is very similar to the A23, and we share a significant share
of the DTSI, the clock IDs that are going to be used will also be shared
with the A23, hence the name of the various header files.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
Maxime Ripard [Tue, 6 Sep 2016 10:29:04 +0000 (12:29 +0200)]
clk: sunxi-ng: div: Allow to set a maximum
Some dividers might have a maximum value that is lower than the width of
the register.
Add a field to _ccu_div to handle those case properly. If the field is set
to 0, the code will assume that the maximum value is the maximum one that
can be used with the field register width.
Otherwise, we'll use whatever value has been set.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Chen-Yu Tsai <wens@csie.org>
clk: rk808: Pass the right pointer as the get_hw context
Right now we are passing a pointer to a pointer to the structure that
will be used to fetch the clk hw, which gets casted later to a pointer
to the structure, thus getting garbage in the hw structs.
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com> Fixes: a8b6e85db6a6 ("clk: rk808: Migrate to clk_hw based OF and
registration APIs") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
This patch adds code instantiating the EPLL, which is used as the
audio subsystem's root clock.
The requirement to specify the external root clock in clocks property
is documented. Having the consumer 'clocks' property ensures proper
initialization order by explicitly specifying dependencies in DT.
It prevents situations when the SoC's clock controller driver has
initialized, the external oscillator clock is not yet registered
and setting clock frequencies through assigned-clock-rates property
doesn't work properly due to unknown external oscillator frequency.
Exynos5410 Audio Subsystem Clock Controller, comparing to the already
supported IP block revisions, has additionally an I2S_MST divider
so a new compatible string is added.
It is not clear from the Exynos5410 User's Manual released on 2012.03.09
where in the clock tree the I2S_MST clock divider can be found exactly
so this clock is left unimplemented for now.
clk: samsung: Use common registration function for pll2550x
There is no such significant differences in pll2550x PLL type
to justify a separate registration function. This patch adapts
exynos5440 driver to use the common function and removes
samsung_clk_register_pll2550x().
Chanwoo Choi [Thu, 25 Aug 2016 06:57:17 +0000 (15:57 +0900)]
clk: samsung: exynos5420: Add clocks for CMU_CDREX domain
This patch adds the mux/divider clocks for CMU_CDREX (DRAM Express
Controller) which generates the clocks for DRAM and NoC (Network on Chip)
bus. There is differnet source of MUX_MX_MSPLL_CCORE between exynos5420
and exynos5422, so each MUX_MX_MSPLL_CCORE uses the different parent source
group.
Chanwoo Choi [Mon, 22 Aug 2016 02:49:44 +0000 (11:49 +0900)]
clk: samsung: exynos5260: Move struct samsung_cmu_info to init section
This patch moves the samsung_cmu_info struct instances to initconst
section, this decreases the kernel image size by 784 bytes, which makes
zImage smaller by 480 bytes.
The patch increases .init.rodata section size by 780 bytes but decreases
.init.text section size by 1564 bytes.
Size of the drivers/clk/samsung/clk-exynos5260.o object file is 29100
bytes without the patch and 28316 after applying the patch.
Chanwoo Choi [Thu, 18 Aug 2016 12:47:19 +0000 (21:47 +0900)]
MAINTAINERS: Add myself as Samsung SoC clock drivers co-maintainer
Add myself to the SAMSUNG SOC CLOCK DRIVERS entry, I'm going to review
and test related patches as supporter. I can access all the datasheet
of Exynos SoC series and can do tests on Exynos based boards. I have
implemented the exynos4415/5433 clock drivers and co-authored the
exynos3250 clock driver. While at it, add missing paths of the exynos
clock driver files.
Stephen Boyd [Thu, 8 Sep 2016 19:54:24 +0000 (12:54 -0700)]
Merge tag 'sunxi-clk-fixes-for-4.8' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux into clk-fixes
Clock Fixes for the Allwinner SoCs, 4.8 Edition
The usual bunch of fixes to the our clock drivers, mostly targetted to the
brand new sunxi-ng drivers.
* tag 'sunxi-clk-fixes-for-4.8' of https://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux:
clk: sunxi-ng: Fix wrong reset register offsets
clk: sunxi-ng: nk: Make ccu_nk_find_best static
clk: sunxi-ng: Fix inverted test condition in ccu_helper_wait_for_lock
clk: sunxi: Fix return value check in sun8i_a23_mbus_setup()
clk: sunxi: pll2: Fix return value check in sun4i_pll2_setup()
Eric Anholt [Wed, 1 Jun 2016 19:05:36 +0000 (12:05 -0700)]
clk: bcm2835: Skip PLLC clocks when deciding on a new clock parent
If the firmware had set up a clock to source from PLLC, go along with
it. But if we're looking for a new parent, we don't want to switch it
to PLLC because the firmware will force PLLC (and thus the AXI bus
clock) to different frequencies during over-temp/under-voltage,
without notification to Linux.
On my system, this moves the Linux-enabled HDMI state machine and DSI1
escape clock over to plld_per from pllc_per. EMMC still ends up on
pllc_per, because the firmware had set it up to use that.
Signed-off-by: Eric Anholt <eric@anholt.net> Fixes: 41691b8862e2 ("clk: bcm2835: Add support for programming the audio domain clocks") Acked-by: Martin Sperl <kernel@martin.sperl.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Eric Anholt [Wed, 1 Jun 2016 19:05:35 +0000 (12:05 -0700)]
clk: bcm2835: Mark the CM SDRAM clock's parent as critical
While the SDRAM is being driven by its dedicated PLL most of the time,
there is a little loop running in the firmware that periodically turns
on the CM SDRAM clock (using its pre-initialized parent) and switches
SDRAM to using the CM clock to do PVT recalibration.
This avoids system hangs if we choose SDRAM's parent for some other
clock, then disable that clock.
Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Martin Sperl <kernel@martin.sperl.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Eric Anholt [Wed, 1 Jun 2016 19:05:34 +0000 (12:05 -0700)]
clk: bcm2835: Mark GPIO clocks enabled at boot as critical
These divide off of PLLD_PER and are used for the ethernet and wifi
PHYs source PLLs. Neither of them is currently represented by a phy
device that would grab the clock for us.
This keeps other drivers from killing the networking PHYs when they
disable their own clocks and trigger PLLD_PER's refcount going to 0.
Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Martin Sperl <kernel@martin.sperl.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Eric Anholt [Wed, 1 Jun 2016 19:05:33 +0000 (12:05 -0700)]
clk: bcm2835: Mark the VPU clock as critical
The VPU clock is also the clock for our AXI bus, so we really can't
disable it. This might have happened during boot if, for example,
uart1 (aux_uart clock) probed and was then disabled before the other
consumers of the VPU clock had probed.
Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Martin Sperl <kernel@martin.sperl.org> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Stephen Boyd [Wed, 7 Sep 2016 01:12:24 +0000 (18:12 -0700)]
Merge tag 'v4.9-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into clk-next
Pull rockchip clk driver updates from Heiko Stuebner:
The biggest addition is probably the special clock-type for ddr clock
control. While reading that clock is done the normal way from the
registers, setting it always requires some sort of special handling
to let the system survive this addition.
As the commit message explains, there are currently 3 handling-types
known. General SRAM-based code on rk3288 and before (which is waiting
essentially for the PIE support that is currently being worked on),
SCPI-based clk setting on the rk3368 through a coprocessor, which we
might support once the support for legacy scpi-variants has matured
and now on the rk3399 (and probably later) using a dcf controller that
is controlled from the arm-trusted-firmware and gets accessed through
firmware calls from the kernel. This is the variant we currently
support, but the clock type is made to support the other variants in
the future as well.
Apart from that slightly bigger chunk, we have a mix of PLL rates,
clock-ids and flags mainly for the rk3399.
And interestingly an iomap fix for the legacy gate driver, where I
hopefully could deter the submitter from actually using that in any
new works.
* tag 'v4.9-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
clk: rockchip: use the dclk_vop_frac clock ids on rk3399
clk: rockchip: drop CLK_SET_RATE_PARENT from rk3399 fractional dividers
clk: rockchip: add 2016M to big cpu clk rate table on rk3399
clk: rockchip: add rk3399 ddr clock support
clk: rockchip: add dclk_vop_frac ids for rk3399 vop
clk: rockchip: add new clock-type for the ddrclk
soc: rockchip: add header for ddr rate SIP interface
clk: rockchip: add SCLK_DDRC id for rk3399 ddrc
clk: rockchip: handle of_iomap failures in legacy clock driver
clk: rockchip: mark rk3399 hdcp_noc and vio_noc as critical
clk: rockchip: use general clock flag when registering pll
clk: rockchip: delete the CLK_IGNORE_UNUSED from aclk_pcie on rk3399
clk: rockchip: add 65MHz and 106.5MHz rates to rk3399 plls used for HDMI
clk: rockchip: drop CLK_SET_RATE_PARENT from rk3399 fractional dividers
Currently the fractional divider clock time can't handle the
CLK_SET_RATE_PARENT flag. This is because, unlike normal dividers,
there is no clk_divider_bestdiv() function to try speeding up the parent
to see if it helps things.
Eventually someone could try to figure out how to make fractional
dividers able to use CLK_SET_RATE_PARENT, but until they do let's not
confuse the common clock framework (and anyone using it) by setting the
flag.
Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Chris Zhong <zyw@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Neil Armstrong [Mon, 22 Aug 2016 12:49:37 +0000 (14:49 +0200)]
clk: meson-gxbb: Export PWM related clocks for DT
Add the PWM related clocks in order to be referenced as PWM source
clocks.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/1471870177-10609-1-git-send-email-narmstrong@baylibre.com
Alexander Müller [Sat, 27 Aug 2016 17:40:54 +0000 (19:40 +0200)]
meson: clk: Add support for clock gates
This patch adds support for the meson8b clock gates. Most of
them are disabled by Amlogic U-Boot, but need to be enabled
for ethernet, USB and many other components.
Signed-off-by: Alexander Müller <serveralex@gmail.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/1472319654-59048-7-git-send-email-serveralex@gmail.com
Alexander Müller [Sat, 27 Aug 2016 17:40:53 +0000 (19:40 +0200)]
gxbb: clk: Adjust MESON_GATE macro to be shared with meson8b
The macro used gxbb_ prefix for clock definitions. In order
to share the macro between gxbb and meson8b, the prefix must
be moved to gxbb.c.
Signed-off-by: Alexander Müller <serveralex@gmail.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/1472319654-59048-6-git-send-email-serveralex@gmail.com
Alexander Müller [Sat, 27 Aug 2016 17:40:52 +0000 (19:40 +0200)]
clk: meson: Copy meson8b CLKID defines to private header file
Only expose future CLKID constants if necessary. This patch
removes CLK_NR_CLKS from the DT bindings but leaves all previously
defined CLKIDs there to keep backward compatibility.
Signed-off-by: Alexander Müller <serveralex@gmail.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/1472319654-59048-5-git-send-email-serveralex@gmail.com
Alexander Müller [Sat, 27 Aug 2016 17:40:51 +0000 (19:40 +0200)]
meson: clk: Rename register names according to Amlogic datasheet
Signed-off-by: Alexander Müller <serveralex@gmail.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/1472319654-59048-4-git-send-email-serveralex@gmail.com
Alexander Müller [Sat, 27 Aug 2016 17:40:50 +0000 (19:40 +0200)]
meson: clk: Move register definitions to meson8b.h
Move the register definitions into a separate header file
to reflect the gxbb implementation.
Signed-off-by: Alexander Müller <serveralex@gmail.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/1472319654-59048-3-git-send-email-serveralex@gmail.com
Alexander Müller [Sat, 27 Aug 2016 17:40:49 +0000 (19:40 +0200)]
clk: meson: Rename meson8b-clkc.c to reflect gxbb naming convention
Signed-off-by: Alexander Müller <serveralex@gmail.com> Signed-off-by: Michael Turquette <mturquette@baylibre.com>
Link: lkml.kernel.org/r/1472319654-59048-2-git-send-email-serveralex@gmail.com
Lin Huang [Mon, 22 Aug 2016 03:36:17 +0000 (11:36 +0800)]
clk: rockchip: add new clock-type for the ddrclk
Changing the rate of the DDR clock needs special care, as the DDR
is of course in use and will react badly if the rate changes under it.
Over time different approaches to handle that were used.
Past SoCs like the rk3288 and before would store some code in SRAM
while the rk3368 used a SCPI variant and let a coprocessor handle that.
New rockchip platforms like the rk3399 have a dcf controller to do ddr
frequency scaling, and support for this controller will be implemented
in the arm-trusted-firmware.
This new clock-type should over time handle all these methods for
handling DDR rate changes, but right now it will concentrate on the
SIP interface used to talk to ARM trusted firmware.
The SIP interface counterpart was merged from pull-request #684 [0]
into the upstream arm-trusted-firmware codebase.
clk: core: Force setting the phase delay when no change
This patch reverts commit 023bd7166be0 ("clk: skip unnecessary
set_phase if nothing to do"), fixing two problems:
* in some SoCs, the hardware phase delay depends on the rate ratio of
the clock and its parent. So, changing this ratio may imply to set
new hardware values, even if the logical delay is the same.
* when the delay was the same as previously, an error was returned.
Signed-off-by: Jean-Francois Moine <moinejf@free.fr> Fixes: 023bd7166be0 ("clk: skip unnecessary set_phase if nothing to do") Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>