Andrew Morton [Mon, 23 May 2011 21:48:32 +0000 (14:48 -0700)]
drivers/gpu/drm/radeon/atom.c: fix warning
udelay() doesn't like 8-bit arguments:
drivers/gpu/drm/radeon/atom.c: In function 'atom_op_delay':
drivers/gpu/drm/radeon/atom.c:653: warning: comparison is always false due to limited range of data type
while we're there, use msleep() rather than open-coding it.
Cc: David Airlie <airlied@linux.ie> Reviewed-by: Alex Deucher <alexdeucher@gmail.com> Cc: Matt Turner <mattst88@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Thu, 19 May 2011 04:14:43 +0000 (14:14 +1000)]
drm/radeon/kms: add wait idle ioctl for eg->cayman
None of the latest GPUs had this hooked up, this is necessary for
correct operation in a lot of cases, however we should test this on a few
GPUs in these families as we've had problems in this area before.
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
Michel Dänzer [Thu, 19 May 2011 14:08:39 +0000 (16:08 +0200)]
agp/uninorth: Fix lockups with radeon KMS and >1x.
This was based on a description by Ben Herrenschmidt:
> I've removed that SBA reset from the normal TLB invalidation path and
> left it only once after turning AGP on.
About six months ago, he said:
> I did it a bit differently, but yeah, you get the idea. I'm doing a
> patch series so don't bother pushing things too hard yet.
But I haven't seen anything from him about this since then, and people are
regularly hitting these lockups, so here we are...
Signed-off-by: Michel Dänzer <daenzer@vmware.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Dave Airlie <airlied@gmail.com>
Alex Deucher [Fri, 20 May 2011 16:36:12 +0000 (12:36 -0400)]
drm/radeon/kms: properly set the CLK_REF bit for DCE3 devices
If the ss clock is external, the CLK_REF bit needs to be set
in the SetPixelClock parameters. This should fix DP failures
in the channel equalization loop.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@gmail.com>
Alex Deucher [Fri, 20 May 2011 08:34:29 +0000 (04:34 -0400)]
drm/radeon/kms: simplify hotplug handler logic
In the hotplug handler, just use the drm dpms functions.
If the monitor is plugged in, turn it on, if it's not,
turn it off. This also reduces power usage by turning
off the encoder and crtc when the monitor is unplugged.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Fri, 20 May 2011 08:34:28 +0000 (04:34 -0400)]
drm/radeon/kms: rewrite DP handling
- reorganize the functions based on use
- clean up function naming
- rework link training to better match what we use internally
- add initial support for DP 1.2 (no MST yet)
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Fri, 20 May 2011 08:34:17 +0000 (04:34 -0400)]
drm/radeon/kms: fix up DP clock programming on DCE4/5
In DP mode, the DP ref clock can come from PPLL, DCPLL, or ext clock,
depending on the asic. The crtc virtual pixel clock is derived from
the DP ref clock.
- DCE4: PPLL or ext clock
- DCE5: DCPLL or ext clock
Setting ATOM_PPLL_INVALID will cause SetPixelClock to skip
PPLL/DCPLL programming and only program the DP DTO for the
crtc virtual pixel clock.
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Alex Deucher [Fri, 20 May 2011 08:34:16 +0000 (04:34 -0400)]
drm/radeon/kms: spread spectrum fixes
- properly mask the ss type
- don't enable ss if type is external or percentage is 0
- if ss enabled and type is external, set ref_div_src to ext clock
- prefer ASIC_INTERNAL_SS_ON_DP to LCD_Info SS_Id for eDP
- fix ss amount calculation
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Fri, 20 May 2011 01:30:02 +0000 (11:30 +1000)]
Merge remote branch 'keithp/drm-intel-next' of ../drm-next into drm-core-next
* 'keithp/drm-intel-next' of ../drm-next:
drm/i915: initialize gen6 rps work queue on Sandy Bridge and Ivy Bridge
drm/i915/sdvo: Reorder i2c initialisation before ddc proxy
drm/i915: FDI link training broken on Ironlake by Ivybridge integration
drm/i915: enable rc6 by default
drm/i915: add fbc enable flag, but disable by default
drm/i915: clean up unused ring_get_irq/ring_put_irq functions
drm/i915: fix user irq miss in BSD ring on g4x
Chris Wilson [Tue, 17 May 2011 13:03:50 +0000 (14:03 +0100)]
drm/i915/sdvo: Reorder i2c initialisation before ddc proxy
The ddc proxy depends upon the underlying i2c bus being selected. Under
certain configurations, the i2c-adapter functionality is queried during
initialisation and so may trigger an OOPS during boot. Hence, we need to
reorder the initialisation of the ddc proxy until after we hook up the i2c
adapter for the SDVO device.
The condition under which it fails is when the i2c_add_adapter calls
into i2c_detect which will attempt to probe all valid addresses on the
adapter iff there is a pre-existing i2c_driver with the same class as
the freshly added i2c_adapter.
So it appears to depend upon having compiled in (or loaded such a
module before i915.ko) an i2c-driver that likes to futz over the
i2c_adapters claiming DDC support.
Reported-by: Mihai Moldovan <ionic@ionic.de> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Keith Packard <keithp@keithp.com> Signed-off-by: Keith Packard <keithp@keithp.com>
Keith Packard [Tue, 17 May 2011 23:13:52 +0000 (16:13 -0700)]
drm/i915: FDI link training broken on Ironlake by Ivybridge integration
Commit 357555c00f8414057f0c12ee3f479f197264123d split out IVB-specific
register definitions for FDI link training, but a piece of that commit
stopped executing some critical code on Ironlake systems while leaving
it running on Sandybridge.
Turn that code back on both Ironlake and Sandybridge
Signed-off-by: Keith Packard <keithp@keithp.com> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Jesse Barnes [Thu, 5 May 2011 22:24:21 +0000 (15:24 -0700)]
drm/i915: add fbc enable flag, but disable by default
FBC has too many corner cases that we don't currently deal with, so
disable it by default so we can enable more important features like RC6,
which conflicts in some configurations.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=31742 Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Ben Widawsky <ben@bwidawsk.net> Signed-off-by: Keith Packard <keithp@keithp.com>
drm/i915: clean up unused ring_get_irq/ring_put_irq functions
This patch depends on patch "drm/i915: fix user irq miss in BSD ring on
g4x".
Once the previous patch apply, ring_get_irq/ring_put_irq become unused.
So simply remove them.
Feng, Boqun [Mon, 16 May 2011 08:02:39 +0000 (16:02 +0800)]
drm/i915: fix user irq miss in BSD ring on g4x
On g4x, user interrupt in BSD ring is missed.
This is because though g4x and ironlake share the same bsd_ring,
their interrupt control interfaces have _two_ differences.
1.different irq enable/disable functions:
On g4x are i915_enable_irq and i915_disable_irq.
On ironlake are ironlake_enable_irq and ironlake_disable_irq.
2.different irq flag:
On g4x user interrupt flag in BSD ring on is I915_BSD_USER_INTERRUPT.
On ironlake is GT_BSD_USER_INTERRUPT
Old bsd_ring_get/put_irq call ring_get_irq and ring_get_irq.
ring_get_irq and ring_put_irq only call ironlake_enable/disable_irq.
So comes the irq miss on g4x.
To fix this, as other rings' code do, conditionally call different
functions(i915_enable/disable_irq and ironlake_enable/disable_irq)
and use different interrupt flags in bsd_ring_get/put_irq.
Randy Dunlap [Wed, 11 May 2011 22:04:34 +0000 (15:04 -0700)]
drm: fix nouveau_acpi build
Fix build errors when CONFIG_ACPI is enabled but MXM_WMI is not enabled
by selecting both MXM_WMI and ACPI_WMI (the latter just for kconfig
dependencies):
nouveau_acpi.c:(.text+0x2400c8): undefined reference to `mxm_wmi_call_mxmx'
nouveau_acpi.c:(.text+0x2400cf): undefined reference to `mxm_wmi_call_mxds'
nouveau_acpi.c:(.text+0x2400fe): undefined reference to `mxm_wmi_call_mxmx'
nouveau_acpi.c:(.text+0x2402ba): undefined reference to `mxm_wmi_supported
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Mon, 16 May 2011 01:53:27 +0000 (11:53 +1000)]
Merge remote branch 'nouveau/drm-nouveau-next' of /ssd/git/drm-nouveau-next into drm-core-next
* 'nouveau/drm-nouveau-next' of /ssd/git/drm-nouveau-next: (55 commits)
drm/nouveau: make cursor_set implementation consistent with other drivers
drm/nva3/clk: better pll calculation when no fractional fb div available
drm/nouveau/pm: translate ramcfg strap through ram restrict table
drm/nva3/pm: allow use of divisor 16
drm/nvc0/pm: parse clock for pll 0x0a (0x137020) from perf table
drm/nvc0/pm: correct core/mem/shader perflvl parsing
drm/nouveau/pm: remove memtiming support check when assigning to perflvl
drm/nva3: support for memory timing map table
drm/nouveau: Associate memtimings with performance levels on cards <= nv98
drm/nva3/pm: initial pass at set_clock() hook
drm/nvc0/gr: calculate some more of our magic numbers
drm/nv50: respect LVDS link count from EDID on SPWG panels
drm/nouveau: recognise DCB connector type 0x41 as LVDS
drm/nouveau: fix uninitialised variable warning
drm/nouveau: Fix a crash at card takedown for NV40 and older cards
drm/nouveau: Free nv04 instmem ramin heap at card takedown
drm/nva3: somewhat improve clock reporting
drm/nouveau: pull refclk from vbios on limits 0x40 boards
drm/nv40/gr: oops, fix random bits getting set in engine obj
drm/nv50: improve nv50_pm_get_clock()
...
Marcin Slusarz [Sun, 1 May 2011 21:49:04 +0000 (23:49 +0200)]
drm/nouveau: make cursor_set implementation consistent with other drivers
When xorg state tracker wants to hide the cursor it calls set_cursor
with NULL buffer_handle and size=0x0, but nouveau refuses to hide it
because size is not 64x64... which is a bit odd. Both radeon and intel
check buffer_handle before validating size of cursor, so make nouveau
implementation consistent with them.
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Wed, 27 Apr 2011 16:34:21 +0000 (02:34 +1000)]
drm/nva3/clk: better pll calculation when no fractional fb div available
The core/mem/shader clocks don't support the fractional feedback divider,
causing our calculated clocks to be off by quite a lot in some cases. To
solve this we will switch to a search-based algorithm when fN is NULL.
For my NVA8 at PL3, this actually generates identical cooefficients to
the binary driver. Hopefully that's a good sign, and that does not
break VPLL calculation for someone..
Ben Skeggs [Wed, 20 Apr 2011 04:36:13 +0000 (14:36 +1000)]
drm/nouveau/pm: translate ramcfg strap through ram restrict table
Hopefully this is how we're supposed to correctly handle when the RAMCFG
strap is above the number of entries in timing-related tables.
It's rather difficult to confirm without finding a configuration where
the ram restrict table doesn't map 8-15 back onto 0-7 anyway. There's
not a single vbios in the repo which is configured differently..
In any case, this is probably still better than potentially reading
outside of the bounds of various tables..
Ben Skeggs [Wed, 20 Apr 2011 01:34:39 +0000 (11:34 +1000)]
drm/nouveau/pm: remove memtiming support check when assigning to perflvl
Really not necessary here, we want to be able to see if/how we managed to
match a timingset to a performance level, even if we can't currently
program it.
Ben Skeggs [Mon, 18 Apr 2011 02:52:47 +0000 (12:52 +1000)]
drm/nvc0/gr: calculate some more of our magic numbers
Again, doesn't quite match NVIDIA's, but not sure it really matters. This
will however, match the same rules we use to calculate the other related
grctx magics.
Ben Skeggs [Sun, 17 Apr 2011 23:57:48 +0000 (09:57 +1000)]
drm/nouveau: recognise DCB connector type 0x41 as LVDS
After looking at a number of different logs, it appears 0x41 likely
indicates the presense of an LVDS panel following the SPWG spec
(http://www.spwg.org/)
Jimmy Rentz [Sun, 17 Apr 2011 20:15:09 +0000 (16:15 -0400)]
drm/nouveau: Fix a crash at card takedown for NV40 and older cards
NV40 and older cards (pre NV50) reserve a vram bo for the vga memory at
card init. This bo is then freed at card shutdown. The problem is that
the ttm bo vram manager was already freed. So a crash occurs when the
vga bo is freed. The fix is to free the vga bo prior to freeing the ttm
bo vram manager. There might be other solutions but this seemed the
simplest to me.
Signed-off-by: Jimmy Rentz <jb17bsome@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Emil Velikov [Mon, 11 Apr 2011 19:43:23 +0000 (20:43 +0100)]
drm/nv50: improve nv50_pm_get_clock()
Many of the nv50 cards have their shader and/or memory pll
disabled at some stage.
This patch addresses those cases, so that the function
returns the correct frequency.
When the shader pll is disabled, the blob reports 2*core clock
Whereas for memory, the data stored in the vbios. This action
is incorrect as some vbioses store a clock value that is less
than the refference clock of the pll.
Thus we are reporting the reff_clk as it is the frequency the
pll actually operates
v2 - Convert NV_INFO() messages to NV_DEBUG()
Provide more information in the actuall message
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Martin Peres [Mon, 11 Apr 2011 22:55:44 +0000 (00:55 +0200)]
drm/nouveau/pm: fix compilation failure when CONFIG_POWER_SUPPLY is not set
Signed-off-by: Martin Peres <martin.peres@ensi-bourges.fr> Reported-by: Stratos Psomadakis <psomas@ece.ntua.gr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 1 Apr 2011 03:17:25 +0000 (13:17 +1000)]
drm/nouveau: remove remnants of nouveau_pgraph_engine from nouveau_channel
The nouveau_wait_for_idle() call should hopefully not have been actually
necessary, we *do* wait for the channel to go idle already. If it's
an issue somehow, the chipset-specific hooks can wait for idle themselves
before taking the lock.
Ben Skeggs [Thu, 31 Mar 2011 05:40:43 +0000 (15:40 +1000)]
drm/nouveau: working towards a common way to represent engines
There's lots of more-or-less independant engines present on NVIDIA GPUs
these days, and we generally want to perform the same operations on them.
Implementing new ones requires hooking into lots of different places,
the aim of this work is to make this simpler and cleaner.
projects / linux-beck.git / log