Linus Walleij [Thu, 25 Aug 2016 22:10:08 +0000 (00:10 +0200)]
iio: st_sensors: fetch and enable regulators unconditionally
These sensors all have Vdd and Vdd_IO lines. This means the
supplies are *not* optional (optional means that the supply is
optional in the electrical sense, not the software sense)
so we need to get the and enable them at all times.
If the device tree or board file does not define suitable
regulators for the component, it will be substituted by a
dummy regulator, or, if regulators are disabled altogether,
by stubs. There is no need to use the IS_ERR_OR_NULL() check
that is considered harmful.
Cc: Giuseppe Barba <giuseppe.barba@st.com> Cc: Denis Ciocca <denis.ciocca@st.com> Cc: Crestez Dan Leonard <leonard.crestez@intel.com> Cc: Gregor Boirie <gregor.boirie@parrot.com> Cc: Mark Brown <broonie@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Alison Schofield [Thu, 25 Aug 2016 05:48:43 +0000 (22:48 -0700)]
iio: adc: ltc2485: add support for Linear Technology LTC2485 ADC
Adds basic support for the LTC2485 ADC - a delta-sigma analog-to-digital
converter with an I2C interface that operates in single shot conversion
mode.
The driver supports an on board 5V reference and the power-on default
configuration which rejects both 50hz & 60hz line frequencies and
operates in 1x speed mode.
Signed-off-by: Alison Schofield <amsfield22@gmail.com> Cc: Daniel Baluta <daniel.baluta@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Colin Ian King [Mon, 25 Jul 2016 22:40:01 +0000 (23:40 +0100)]
iio: ad5755: fix off-by-one on devnr limit check
The comparison for devnr limits is off-by-one, the current check
allows 0 to AD5755_NUM_CHANNELS and the limit should be in fact
0 to AD5755_NUM_CHANNELS - 1. This can lead to an out of bounds
write to pdata->dac[devnr]. Fix this by replacing > with >= on the
comparison.
Signed-off-by: Colin Ian King <colin.king@canonical.com> Fixes: c947459979c6 ("iio: ad5755: add support for dt bindings") Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Merge tag 'iio-for-4.9a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into work-testing
Jonathan writes:
First round of new features, device support and cleanups for IIO in the 4.9 cycle.
Device support
* ak8974
- New driver and bindings for this 2009 vintage magnetometer (it was very
popular back then!)
* atlas-ph-sensor
- ORP sensor support(I had to look up what one of these was)
* cio-dac
- New driver for Measurement Computing DAC boards
* dmard06
- New driver for Domintech DMARDO6 accelerometer. Also vendor prefix.
* dmard09
- New driver for Domintech DMARD09 accelerometer.
* maxim-thermocouple
- max6675 and max31855 new driver
* mt6577 auxdac
- new driver for this Mediatek chip mt2701, mt6577 and mt8173 have this
hardware.
* ti-adc161s626
- new driver for this TI single channel differential ADC.
* vcnl4000
- support vcnl4010 and vcnl4020 which are compatible for all features
currently supported by this driver.
New features
* Core
- Allow retrieving of underlying iio_dev from a callback buffer handle.
This is needed to allow client drivers to perform operations such as
configuring the trigger used.
* hid-sensors
- asynchronous resume support to avoid really long resume times.
* kxcjk-1013
- add the mysterious KIOX000A ACPI id seen in the wild.
* Tools
- lsiio now enumerates processed as well as raw channels.
Cleanup
* ad7298
- use iio_device_claim_direct_mode and friends to simplify locking around
mode switching and drop some boilerplate.
* ad7793
- use iio_device_claim_direct_mode and friends to simplify locking around
mode switching and drop some boilerplate.
* ade7854
- checkpatch fixups (alignment of parameters)
* atlas-ph-sensor
- use iio_device_claim_direct_mode and friends to simplify locking around
mode switching and drop some boilerplate.
- Switch to REGCACHE_NONE as there are no useful register to cache.
* bma180
- use iio_device_claim_direct_mode and friends to simplify locking around
mode switching and drop some boilerplate.
* hdc100x
- Add mention of the HDC1000 and HDC1008 to the Kconfig help text.
* isl29018
- Add driver specific prefixes to defines and function names.
- Remove excessive logging.
- Drop newlines which add nothing to readability.
- General tidying up of comments.
- Drop I2C_CLASS_HWMON as irrelevant to driver.
* isl29028
- Add driver specific prefixes to defines, enums and function names.
- Drop comma's from available attribute output as not ABI compliant.
- Drop I2C_CLASS_HWMON as irrelevant to driver.
* kxsd9
- devicetree bindings.
* mag3110
- This one wasn't locking to protect against mode switches during
raw_reads. Use the iio_claim_direct_mode function to fix this buglet.
* maxim-theromcouple
- Fix missing selects for triggered buffer support in Kconfig.
* nau7802
- Use complete instead of complete_all as only one completion at a time.
* sx9500
- Use complete instead of complete_all as only one completion at a time.
* us5182d
- Add a missing error code asignment instead of checking the result of
an already checked statement.
* vcnl4000
- Use BIT macro where appropriate.
- Refactor return codes in read_raw callback.
- Add some missing locking for concurrent accesses to the device.
James Simmons [Mon, 22 Aug 2016 16:57:43 +0000 (12:57 -0400)]
staging: lustre: mdc: fix NULL pointer dereference in mdc_adjust_dirpages
The function mdc_adjust_dirpages is only called on platforms which
don't have pages 4K in size which is why kbuild only reported this
for platforms like the Alpha. The problem was a typo in ordering of
variables in the beginning of a while loop. We were accessing the
dp pointer before it was kmapped.
Signed-off-by: James Simmons <jsimmons@infradead.org> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some platforms power off sensor hubs during S3 suspend, which will require
longer time to resume. This hurts system resume time, so resume
asynchronously.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Zhiyong Tao [Thu, 18 Aug 2016 07:11:36 +0000 (15:11 +0800)]
iio: adc: mt2701: Add Mediatek auxadc driver for mt2701.
Add Mediatek auxadc driver based on iio.
It will register a device in iio and support iio.
So thermal can read auxadc channel to sample data by iio device.
It is tested successfully on mt2701 platform.
Mt8173 and mt6577 platforms are not tested.
But the expectation is compatible.
Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Zhiyong Tao [Thu, 18 Aug 2016 07:11:35 +0000 (15:11 +0800)]
dt-bindings: auxadc: Add binding document for Mediatek auxadc.
The commit adds the device tree binding documentation for the mediatek
auxadc found on Mediatek MT2701.
Thermal gets auxadc sample data by iio device.
So the commit changes auxadc device tree binding documentation from
/soc/mediatek/auxadc.txt to /iio/adc/mt6577_auxadc.txt.
Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Zhiyong Tao <zhiyong.tao@mediatek.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Alison Schofield [Thu, 18 Aug 2016 16:09:00 +0000 (09:09 -0700)]
iio: magnetometer: mag3110: claim direct mode during raw reads
Driver was checking for direct mode but not locking it. Use
claim/release helper functions to guarantee the device stays
in direct mode during raw reads.
Signed-off-by: Alison Schofield <amsfield22@gmail.com> Cc: Daniel Baluta <daniel.baluta@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Quentin Lambert [Fri, 12 Aug 2016 14:15:18 +0000 (16:15 +0200)]
staging: rts5208/ms.c: add missing releases in mg_get_local_EKB and mg_get_ICV
mg_get_local_EKB and mg_get_ICV used to return with an error code before
releasing all resources. This patch add a jump to the appropriate label
ensuring that the resources are properly released before returning.
Colin Ian King [Thu, 14 Jul 2016 10:21:28 +0000 (11:21 +0100)]
staging: rtl8723au: hal: check BT_Active and BT_State with correct bit pattern
BT_Active and BT_State are being masked with 0x00ffffff so it the subsequent
comparisons with 0xffffffff are therefore a buggy check. Instead, check them
against 0x00ffffff.
Unfortunately I couldn't find a datasheet or hardware to see if 0xffffffff
is an expected invalid bit pattern that should be checked before BT_Active and
BT_State are masked with 0x00ffffff, so for now, this fix seems like the least
risky approach.
Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nipun Gupta [Wed, 29 Jun 2016 17:14:39 +0000 (22:44 +0530)]
fsl-mc: add helper macro to determine if a device is of fsl_mc type
Add a helper macro to return if a device has a bus type of fsl_mc.
This makes the bus driver code more readable and provides a way for
drivers like the SMMU driver to easily check the bus type.
Binoy Jayan [Wed, 8 Jun 2016 07:40:55 +0000 (13:10 +0530)]
staging: r8723au: Remove unused semaphores
The semaphores xmit_sema, terminate_xmitthread_sema, tx_retevt and
io_req have no users, hence remove all references to them.
Semaphores are going away in the future.
Larry Finger [Sun, 5 Jun 2016 19:11:19 +0000 (14:11 -0500)]
staging: r8188eu: Fix scheduling while atomic splat
Commit fadbe0cd5292851608e2e01b91d9295fa287b9fe ("staging: rtl8188eu:
Remove rtw_zmalloc(), wrapper for kzalloc()") changed all allocation
calls to be GFP_KERNEL even though the original wrapper was testing
to determine if the caller was in atomic mode. Most of the mistakes
were corrected with commit 33dc85c3c667209c930b2dac5ccbc2a365e06b7a
("staging: r8188eu: Fix scheduling while atomic error introduced in
commit fadbe0cd"); however, two kzalloc calls were missed as the
call only happens when the driver is shutting down.
Larry Finger [Sun, 5 Jun 2016 15:20:59 +0000 (10:20 -0500)]
staging: r8188eu: Remove some false positives from kmemleak
When this driver preallocates some SKBs, kmemleak is unable to find that
allocated memory when it scans. When the driver is unloaded, that memory
is released; therefore, the report is a false positive.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Larry Finger [Sat, 4 Jun 2016 01:17:37 +0000 (20:17 -0500)]
staging: r8712u: Handle some false positives from kmemleak
When this driver preallocates some URBs, kmemleak is unable to find that
allocated memory when it scans. When the driver is unloaded, that memory
is reclaimed, therefore, the report is a false positive.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Larry Finger [Sat, 4 Jun 2016 01:17:36 +0000 (20:17 -0500)]
staging: r8712u: Fix leak of skb
There are two types of messages queued for RX. The major type, which does
I/O on the device, was being handled properly. The skbs that communicated
with the firmware were being leaked.
While rewriting the code that sets up the skb, it was possible to remove
the private variable indicating that the old skb could be reused.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Compiling the rtlwifi drivers for ARM with gcc -Wextra warns about lots of
incorrect code that results from 'char' being unsigned here, e.g.
staging/rtl8192e/rtl8192e/r8192E_phy.c:1072:36: error: comparison is always false due to limited range of data type [-Werror=type-limits]
staging/rtl8192e/rtl8192e/r8192E_phy.c:1104:36: error: comparison is always false due to limited range of data type [-Werror=type-limits]
staging/rtl8192e/rtl8192e/rtl_core.c:1987:16: error: comparison is always false due to limited range of data type [-Werror=type-limits]
staging/rtl8192e/rtl8192e/rtl_dm.c:782:37: error: comparison is always false due to limited range of data type [-Werror=type-limits]
staging/rtl8192e/rtllib_softmac_wx.c:465:16: error: comparison is always false due to limited range of data type [-Werror=type-limits]
This patch changes all uses of 'char' in this driver that refer to
8-bit integers to use 's8' instead, which is signed on all architectures.
Compiling the rtlwifi drivers for ARM with gcc -Wextra warns about lots of
incorrect code that results from 'char' being unsigned here, e.g.
staging/rtl8192u/r8192U_core.c:4150:16: error: comparison is always false due to limited range of data type [-Werror=type-limits]
staging/rtl8192u/r8192U_dm.c:646:50: error: comparison is always false due to limited range of data type [-Werror=type-limits]
This patch changes all uses of 'char' in this driver that refer to
8-bit integers to use 's8' instead, which is signed on all architectures.
Binoy Jayan [Mon, 6 Jun 2016 04:38:06 +0000 (10:08 +0530)]
rtl8188eu: pwrctrl_priv: Replace semaphore 'lock' with mutex
The semaphore 'lock' in pwrctrl_priv is a simple mutex, so it should
be written as one. Semaphores are going away in the future.
_enter_pwrlock was using down_interruptible(), so the lock could be broken
by sending a signal. This could be a bug, because nothing checks the return
code here. Hence, using mutex_lock instead of the interruptible version.
Also, remove the now unused wrappers _init_pwrlock, _enter_pwrlock,
_exit_pwrlock and _rtw_down_sema.
Colin Ian King [Mon, 15 Aug 2016 14:45:04 +0000 (15:45 +0100)]
staging: ks7010: don't print skb->dev->name if skb is null
A null pointer dereference will occur when skb is null and
skb->dev->name is printed. Replace the skb->dev->name with
plain text "ks_wlan" to fix this.
Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
wait_for_completion_interruptible_timeout return 0 on timeout and
-ERESTARTSYS if interrupted. The check for
!wait_for_completion_interruptible_timeout() would report an interrupt
as timeout. Further, while HZ/50 will work most of the time it could
fail for HZ < 50, so this is switched to msecs_to_jiffies(20).
Fixes: 13a9930d15b4 ("staging: ks7010: add driver from Nanonote extra-repository") Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
yeongjun Kim [Tue, 14 Jun 2016 15:36:07 +0000 (00:36 +0900)]
staging: sm750fb: fix block comments errors in ddk750_display.c
WARNING: Block comments use * on subsequent lines
WARNING: Block comments use a trailing */ on a separate line
WARNING: Block comments use * on subsequent lines
WARNING: Block comments use a trailing */ on a separate line
Signed-off-by: yeongjun Kim <iam.yeongjunkim@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Philippe Reynes [Fri, 15 Jul 2016 23:13:35 +0000 (01:13 +0200)]
net: ethernet: octeon: use phy_ethtool_{get|set}_link_ksettings
There are two generics functions phy_ethtool_{get|set}_link_ksettings,
so we can use them instead of defining the same code in the driver.
There was a check on CAP_NET_ADMIN in cvm_oct_set_settings, but this
check is already done in dev_ethtool, so no need to repeat it before
calling the generic function.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Philippe Reynes [Fri, 15 Jul 2016 23:13:34 +0000 (01:13 +0200)]
net: ethernet: octeon: use phydev from struct net_device
The private structure contain a pointer to phydev, but the structure
net_device already contain such pointer. So we can remove the pointer
phydev in the private structure, and update the driver to use the
one contained in struct net_device.
Signed-off-by: Philippe Reynes <tremyfr@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: slicoss: improve implementation concerning the shared memory
Remove the volatile specifiers of struct slic_shmem. Furthermore store the
bus addresses for the isr pointer, link status and statistics separately
and access the upper and lower word of these addresses by means of
[lower|upper]_32_bits(). By doing this take the endianness into account.
staging: slicoss: dont use a structure but offsets for register accesses
Use the new register accessors that use offsets instead of the slic_regs
structure to read/write registers. Since not longer needed remove the
structure completley.
Introduce the function slic_flush_write() which reads from the HOSTID
register and can be used to avoid PCI write posting. Use the function at
several critical places in the code.
staging: slicoss: introduce register accessors that use register offsets
Introduce accessor functions that read and write registers by using a
register offset.
This is in preparation to replace the register addressing by means of the
slic_regs struct with an addressing by means of offsets.
staging: slicoss: start tx queue when interface is brought up
There is no reason to delay tx queue activation until a link is detected.
So start the queue when the interface is brought up and stop it when the
interface is brought down.
staging: slicoss: handle allocation failure in slic_init_adapter
The memory allocation in slic_init_adapter() can fail. Return an error in
this case and unwind properly. Also make sure that the allocated memory is
properly freed in case of an error in the calling probe() function.
By doing this also replace the alloc() followed by memset to zero the
memory with a zalloc() version.
projects / linux-beck.git / log