Dan Williams [Tue, 26 Apr 2011 20:19:53 +0000 (13:19 -0700)]
isci: allow fallback to option-rom if efi variable retrieval fails
If the scu efi driver is disabled but the option-rom is enabled (during an efi
boot) allow the code to fallback to scanning legacy option-rom space for the
parameters.
Reported-by: Yinghai Lu <yinghai.lu@oracle.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dave Jiang [Tue, 26 Apr 2011 19:31:37 +0000 (12:31 -0700)]
isci: removing non-working ATAPI code
Removing not used / bit-rotten ATAPI code. This needs to go back
and debugged at a later date.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
[reflow against devel, delete dead sati headers] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan Williams [Mon, 25 Apr 2011 21:29:29 +0000 (14:29 -0700)]
isci: kill smp_discover_response
An lldd need never look at the contents of an smp_discover_response frame.
Kill the remaining locations where isci is looking at it:
1/ covering for expanders that do not set the stp_attached bit (already
handled by sas_ex_discover_end_dev)
2/ an overkill method to notifiy the rest of the driver about remote_device
sas addresses
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan Williams [Fri, 22 Apr 2011 01:44:45 +0000 (18:44 -0700)]
isci: kill smp_discover_response_protocols in favor of domain_device.dev_type
This is step 1 of removing the contortions to:
1/ unparse expander phy data into a smp discover frame
2/ open-code-parse the smp discover fram into a domain_device.dev_type equivalent
libsas has already spent cycles determining the dev_type, so now that
scic_sds_remote_device is unified with isci_remote_device we can
directly reference dev_type.
This might also change multi-level expander detection as we previously only
looked at dev_type == EDGE_DEV and we did not consider the FANOUT_DEV case.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan Williams [Mon, 25 Apr 2011 18:48:29 +0000 (11:48 -0700)]
isci: cleanup remote device construction and comments
The construction routines scic_remote_device_[de]a_construct both reference
the need to call scic_remote_device_construct first. Delete that comment and
just have them call it explicitly, also:
* move the comments from header to source
* delete dead references to scic_[de]a_remote_device_add_phy
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan Williams [Sat, 23 Apr 2011 02:18:03 +0000 (19:18 -0700)]
isci: move remote_device handling out of the core
Now that the core/lldd remote_device data structures are nominally unified
merge the corresponding sources into the top-level directory. Also move the
remote_node_context infrastructure which has no analog at the lldd level.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan Williams [Tue, 19 Apr 2011 20:48:49 +0000 (13:48 -0700)]
isci: make a remote_node_context a proper member of a remote_device
A rnc object has the same lifetime as its associated remote_device. It might
get re-initialized, but a remote device always has an rnc member. Preparation
for unifying scic_sds_remote_device and isci_remote_device
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Removes unnecessary usage of BUG_ON macro, excluding core directory.
In some cases macro is unnecesary, check is done in caller function.
In other cases macro is replaced by if construction with
appropriate warning.
Signed-off-by: Maciej Patelczyk <maciej.patelczyk@intel.com>
[changed some survivable bug conditions to WARN_ONCE] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Clean warnings and errors reported by sparse tool.
request.c:430:50: warning: mixing different enum types
remote_device.c:534:39: warning: symbol 'flags' shadows an earlier one
task.c:495:44: warning: mixing different enum types
scic_sds_controller.c:2155:24: warning: mixing different enum types
scic_sds_controller.c:2272:36: warning: mixing different enum types
scic_sds_controller.c:2911:38: warning: incorrect type in initializer (different address spaces)
scic_sds_controller.c:2913:25: warning: incorrect type in argument 2 (different address spaces)
scic_sds_request.c:875:34: warning: cast removes address space of expression
scic_sds_request.c:876:123: warning: incorrect type in argument 2 (different address spaces)
scic_sds_port.c:585:51: warning: incorrect type in assignment (different address spaces)
scic_sds_port.c:712:9: warning: incorrect type in argument 2 (different address spaces)
scic_sds_port.c:1770:25: warning: incorrect type in argument 2 (different address spaces)
Signed-off-by: Bartosz Barcinski <Bartosz.Barcinski@intel.com> Signed-off-by: Maciej Patelczyk <maciej.patelczyk@intel.com>
[fixed up some false positives and misconversions] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Maciej Trela [Wed, 13 Apr 2011 00:28:39 +0000 (17:28 -0700)]
isci: remove base_phy abstraction
Merge struct sci_base_phy into scic_sds_phy. Until now sci_base_phy was
referenced using scic_sds_phy->parent field.
'sci_base_phy' state machine handlers were also merged into scic_sds_phy
state handlers.
Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Maciej Trela <Maciej.Trela@intel.com> Signed-off-by: Maciej Patelczyk <maciej.patelczyk@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Maciej Trela [Wed, 13 Apr 2011 00:28:37 +0000 (17:28 -0700)]
isci: remove base_port abstraction
Merge struct sci_base_port into scic_sds_port. Until now sci_base_port
was referenced indirectly with scic_sds_port->parent field.
'sci_base_port' state machine handlers were also incorporated into
scic_sds_port handlers.
Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Maciej Trela <Maciej.Trela@intel.com> Signed-off-by: Maciej Patelczyk <maciej.patelczyk@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Maciej Trela [Wed, 13 Apr 2011 00:28:35 +0000 (17:28 -0700)]
isci: remove base_remote_device abstraction
Merge struct sci_base_remote_device into scic_sds_remote_device. As for
now sci_base_remote_device was accessed indirectly using
scic_sds_remote_device->parent field. Both machine state handlers are
also merged together.
Reported-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Maciej Trela <Maciej.Trela@intel.com> Signed-off-by: Maciej Patelczyk <maciej.patelczyk@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Remove the insane infrastructure for preallocating coheren DMA regions,
and just allocate the memory where needed. This also gets rid of the
aligment adjustments given that Documentation/DMA-API-HOWTO.txt sais:
"The cpu return address and the DMA bus master address are both
guaranteed to be aligned to the smallest PAGE_SIZE order which
is greater than or equal to the requested size. This invariant
exists (for example) to guarantee that if you allocate a chunk
which is smaller than or equal to 64 kilobytes, the extent of the
buffer you receive will not cross a 64K boundary."
Signed-off-by: Christoph Hellwig <hch@lst.de>
[djbw: moved allocation from start to init, re-add memset] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Instead of filling up tables with default handlers call the default
handler in the only caller.
IMHO the whole state handlers concept is not very suitable for the
isci request. For example there is a single real instance of the
start handler, and we'd be much better off just having a check for
the right state in the only caller, than all this mess. It's
quite similar for the abort handler as well.
Even the actual state machine has a lot of states that are rather
pointless. The initial and constructed states are not needed at all
as the request is not reachable for calls before it's fully set up and
started. And the abort state should be replaced with an abort actions
and a state transition to the completed state.
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Merge struct sci_base_request into scic_sds_request, and also factor the two
types of state machine handlers into one function. While we're at it also
remove lots of duplicate incorrect kerneldoc comments for the state machine
handlers.
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Merge struct sci_base_controller into scic_sds_controller, and also factor
the two types of state machine handlers into one function. While we're at
it also remove lots of duplicate incorrect kerneldoc comments for the state
machine handlers.
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan Williams [Thu, 31 Mar 2011 20:10:44 +0000 (13:10 -0700)]
isci: fix fragile/conditional isci_host lookups
A domain_device can always reference back to ->lldd_ha unlike local lldd
structures. Fix up cases where the driver uses local objects to look up the
isci_host. This also changes the calling conventions of some routines to
expect a valid isci_host parameter rather than re-lookup the pointer on entry.
Incidentally cleans up some macros that are longer to type than the open-coded
equivalent:
isci_host_from_sas_ha
isci_dev_from_domain_dev
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Require a valid isci_host in support of the general cleanup to not
re-lookup the host via potentially fragile methods when more robust
methods are available. Also cleans up some more casting that should be
using container_of() to up-cast a base structure in a more type-safe
manner.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Jeff Skirvin [Thu, 31 Mar 2011 20:10:40 +0000 (13:10 -0700)]
isci: Qualify when the host lock is managed for STP/SATA callbacks.
In the case of internal discovery related STP/SATA I/O started
through sas_execute_task the host lock is not taken by libsas before
calling lldd_execute_task, so the lock should not be managed before
calling back to libsas through task->task_done or sas_task_abort.
Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Jeff Skirvin [Thu, 31 Mar 2011 20:10:38 +0000 (13:10 -0700)]
isci: Fix use of SATA soft reset state machine.
The driver SATA LUN reset function incorrectly sent an SRST deassert
FIS, which is unnecessary because the core initiates the entire SATA
soft reset state machine from the assert request.
Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Jeff Skirvin [Thu, 31 Mar 2011 20:10:36 +0000 (13:10 -0700)]
isci: Free host lock for SATA/STP abort escalation at submission time.
In the case of I/O requests that fail at submit time because of a
pending reset condition, the host lock for SATA/STP devices must be
managed for any SCSI-initiated I/O before sas_task_abort is called.
Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dave Jiang [Sun, 27 Mar 2011 00:14:07 +0000 (17:14 -0700)]
isci: Remove "screaming" data types
Converting the all CAPS data types to lower case.
Reported-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan Williams [Sat, 26 Mar 2011 23:43:01 +0000 (16:43 -0700)]
isci: namespacecheck cleanups
* mark needlessly global routines static
* delete unused functions
* move kernel-doc blocks from header files to source
* reorder some functions to delete declarations
* more default handler cleanups phy
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Also performs some collateral cleanups like killing casts that assume
structure member ordering, and consolidating a lot of duplicated default
handler code (the primary callers of the *_get_base_state_machine macros) via
a helper.
Reported-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dave Jiang [Sat, 26 Mar 2011 23:11:51 +0000 (16:11 -0700)]
isci: Remove event_* calls as they are just wrappers
Removed isci_event_* calls and call those functions directly.
Reported-by: Christoph Hellwig <hch@infradead.org> Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan Williams [Fri, 25 Mar 2011 17:05:58 +0000 (10:05 -0700)]
isci: fix a build warning
Use min_t to address:
drivers/scsi/isci/probe_roms.c: In function ‘isci_get_efi_var’:
drivers/scsi/isci/probe_roms.c:241: warning: comparison of distinct pointer types lacks a cast
Reported-by: David Milburn <dmilburn@redhat.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan Williams [Fri, 25 Mar 2011 16:58:15 +0000 (09:58 -0700)]
isci: fix apc mode definition
The original apc mode definition is the correct one, the fix from commit 4711ba10 "isci: fix oem parameter initialization and mode detection" was based
on a typo from a specification update.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dave Jiang [Wed, 16 Mar 2011 21:57:23 +0000 (14:57 -0700)]
isci: exposing user parameters via module params
Exposing the user config parameters through the kernel module parameters.
The kernel module params will have the default values set and we will no
longer pulling the default values for user params from the core.
Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan Williams [Fri, 11 Mar 2011 18:43:57 +0000 (10:43 -0800)]
isci: fix oem parameter initialization and mode detection
1/ Since commit 858d4aa7 "isci: Move firmware loading to per PCI device" we have
been silently falling back to built-in defaults for the parameter settings by
skipping the call to scic_oem_parameters_set().
2/ The afe parameters from the firmware were not being honored
3/ The latest oem parameter definition flips the mode_type values which are
now 0: for APC 1: for MPC. For APC we need to make sure all the phys
default to the same address otherwise strict_wide_ports will cause duplicate
domains.
4/ Fix up the driver announcement to indicate the source of the
parameters.
5/ Fix up the sas addresses to be unique per controller (in the fallback case)
Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
1/ add OEM paramater support for mode_type (MPC vs APC)
2/ add OEM parameter support for max_number_concurrent_device_spin_up
3/ cleanup scic_sds_controller_start_next_phy
todo: hook up the amp control afe parameters into the afe init code
Signed-off-by: Henryk Dembkowski <henryk.dembkowski@intel.com> Signed-off-by: Jacek Danecki <Jacek.Danecki@intel.com>
[cleaned up scic_sds_controller_start_next_phy] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan Williams [Tue, 8 Mar 2011 17:52:49 +0000 (09:52 -0800)]
isci: Add support for probing OROM for OEM params
We need to scan the OROM for signature and grab the OEM parameters. We
also need to do the same for EFI. If all fails then we resort to user
binary blob, and if that fails then we go to the defaults.
Share the format with the create_fw utility so that all possible sources
of the parameters are in-sync.
Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Jeff Skirvin [Wed, 16 Mar 2011 16:41:59 +0000 (09:41 -0700)]
isci: don't hold scic_lock over calls to sas_task_abort()
In the case where submitted I/Os fail with the status code
SCI_FAILURE_REMOTE_DEVICE_RESET_REQUIRED, the execute function now waits
until scic_lock is cleared before calling the helper function
"isci_request_signal_device_reset" which sets the flag for the pending
reset condition on the I/O.
Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan Williams [Fri, 11 Mar 2011 18:13:51 +0000 (10:13 -0800)]
isci: fix incorrect assumptions about task->dev and task->dev->port being NULL
A domain_device has the same lifetime as its related scsi_target. The
scsi_target is reference counted based on outstanding commands,
therefore it is safe to assume that if we have a valid sas_task that the
->dev pointer is also valid.
The asd_sas_port of a domain_device has the same lifetime as the driver
so it can also never be NULL as long as the sas_task is valid and the
driver is loaded.
This also cleans up isci_task_complete_for_upper_layer(), renames it to
isci_task_refuse() and notices that the isci_completion_selection
parameter was set to isci_perform_normal_io_completion by all callers.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan Williams [Thu, 10 Mar 2011 05:27:46 +0000 (21:27 -0800)]
isci: Errors in the submit path for SATA devices manage the ap lock.
Since libsas takes the domain device sata_dev.ap->lock before submitting
a task, error completions in the submit path for SATA devices must
unlock/relock when completing the sas_task back to libsas.
Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Jeff Skirvin [Fri, 4 Mar 2011 22:06:56 +0000 (14:06 -0800)]
isci: Fix TMF build for SAS/SATA LUN reset cases.
In the case where a SAS or SATA LUN reset TMF is built a NULL pointer
dereference occurred because of the (unused) callback data pointer.
Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Jacek Danecki <Jacek.Danecki@intel.com>
Jeff Skirvin [Fri, 4 Mar 2011 22:06:50 +0000 (14:06 -0800)]
isci: Code review change for completion pointer cleanup.
Since the request structure contains a pointer to the completion to be
used if the request is being aborted or terminated, there is no reason
to pass the completion as a pointer to isci_terminate_request_core().
Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Jacek Danecki <Jacek.Danecki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Jeff Skirvin [Wed, 9 Mar 2011 02:22:07 +0000 (19:22 -0700)]
isci: Cleaning up task execute path.
Made sure the device ready check accounts for all states.
Moved the aborted task check into the loop of pulling task requests
off of the submitted list.
Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Jacek Danecki <Jacek.Danecki@intel.com>
[remove host and device starting state checks] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Jeff Skirvin [Fri, 4 Mar 2011 22:06:46 +0000 (14:06 -0800)]
isci: save the i/o tag outside the scic request structure.
The pointer to the core representation of a request is marked NULL at
completion, but we need to save the i/o tag for task management.
Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Jacek Danecki <Jacek.Danecki@intel.com>
[revise changelog] Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Jeff Skirvin [Fri, 4 Mar 2011 22:06:44 +0000 (14:06 -0800)]
isci: Any reset indicated on an I/O completion escalates it to the error path.
If there is a pending device reset, the I/O is used to accomplish the reset by setting the
RESET bit in the task status, and then putting the task into the error handler
path using sas abort task.
Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Jacek Danecki <Jacek.Danecki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Jeff Skirvin [Fri, 4 Mar 2011 22:06:42 +0000 (14:06 -0800)]
isci: fix completion / abort path.
Corrected use of the request state_lock in the completion callback.
In the case where an abort (or reset) thread is trying to terminate an
I/O request, it sets the request state to "aborting" (or "terminating")
if the state is still "starting". One of the bugs was to never set the
state to "completed". Another was to not correctly recognize the
situation where the I/O had completed but the sas_task was still pending
callback to task_done - this was typically a problem in the LUN and
device reset cases.
It is now possible that we leave isci_task_abort_task() with
request->io_request_completion pointing to localy allocated
aborted_io_completion struct. It may result in a system crash.
Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Maciej Trela <Maciej.Trela@intel.com> Signed-off-by: Jacek Danecki <Jacek.Danecki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Jeff Skirvin [Fri, 4 Mar 2011 22:06:40 +0000 (14:06 -0800)]
isci: Changes in isci_host_completion_routine
Changes to move management of the reqs_in_process entry for the request here.
Made changes to note when the task is already in the abort path and
cannot be completed through callbacks.
Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Jacek Danecki <Jacek.Danecki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Jeff Skirvin [Fri, 4 Mar 2011 22:06:38 +0000 (14:06 -0800)]
isci: isci_request_cleanup_completed_loiterer checks task before task_done
In the condition where outstanding I/Os are being cleaned from the device
requests in process list, the cleanup function needs to check that the
request is actually a sas-task and not a task management function.
Signed-off-by: Jeff Skirvin <jeffrey.d.skirvin@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan Williams [Fri, 4 Mar 2011 01:59:32 +0000 (17:59 -0800)]
isci: preallocate remote devices
Until we synchronize against device removal this limits the damage of
use after free bugs to the driver's own objects. Unless we implement
reference counting we need to ensure at least a subset of a remote
device is valid at all times. We follow the lead of other libsas
drivers that also preallocate devices.
This also enforces maximum remote device accounting at the lldd layer,
but the core may still run out of RNC's before we hit this limit.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan Williams [Fri, 4 Mar 2011 20:10:29 +0000 (12:10 -0800)]
isci: replace isci_remote_device completion with event queue
Replace the device completion infrastructure with the controller wide
event queue. There was a potential for the stop and ready notifications
to corrupt each other, now that cannot happen.
The stop pending flag cannot be used until devices are statically
allocated. We temporarily need to maintain a completion to handle
waiting for an object that has disappeared, but we can at least stop
scribbling on freed memory.
A future change will also get rid of the "stopping" state as it should
not be exposed to the rest of the driver.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan Williams [Mon, 7 Mar 2011 22:47:35 +0000 (14:47 -0800)]
isci: kill "host quiesce" mechanism
The midlayer is already throttling i/o in the places where host_quiesce
was trying to prevent further i/o to the device. It's also problematic
in that it holds a lock over GFP_KERNEL allocations.
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan Williams [Thu, 3 Mar 2011 22:58:11 +0000 (14:58 -0800)]
isci: pad stp and smp request sizes
Ross says:
"The memory allocation for these requests doesn’t take into account the
additional memory needed when the code in
scic_sds_s[mst]p_request_assign_buffers() shifts the struct
scu_task_context so that it is cache line aligned:
In an example from my machine, total buffer that I’ve given to SCIC goes
from 0x410024566f84 to 0x410024567308. From this same example, this
call shifts my task_context_buffer from 0x410024567208 to
0x410024567240.
This means that the task_context_buffer that used to range from
0x410024567208 to 0x410024567308 instead now goes from 0x410024567240 to
0x410024567340.
When the memset() call at the end of scic_task_request_construct()
clears out this task_context_buffer, it does so from 0x410024567240 to
0x410024567340, effectively killing whatever buffer follows this
allocation in memory."
djbw:
Use the kernel's PTR_ALIGN instead of
scic_sds_request_align_task_context_buffer() and SMP_CACHE_BYTES instead of
the local CACHE_LINE_SIZE definition.
TODO: These allocations really want to be better defined in a union rather
than opaque buffers carved up by macros.
Reported-by: Ross Zwisler <ross.zwisler@intel.com> Signed-off-by: Jacek Danecki <Jacek.Danecki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan Williams [Thu, 3 Mar 2011 00:45:18 +0000 (16:45 -0800)]
isci: fix hang after target reset
When aborting a task context we need to be sure that the hardware has acted on
this request (retrieved the task context) before invalidating the remote node
context. In the case of the "dummy" task context and remote node we do not
have the full state machine that goes through the complete tc abort and rnc
invalidate states. Instead we ensure the hardware has seen and acted on
Signed-off-by: Jacek Danecki <Jacek.Danecki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Pawel Marek [Tue, 1 Mar 2011 20:31:06 +0000 (12:31 -0800)]
isci: controller stop/start fixes
Core reworks to support stopping and re-starting the controller, lays the
groundwork for phy disable / re-enable and fixes other bugs around port/phy
setup/teardown.
Signed-off-by: Pawel Marek <pawel.marek@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Tomasz Chudy [Fri, 25 Feb 2011 10:25:09 +0000 (02:25 -0800)]
isci: workaround port task scheduler starvation issue
There is a condition whereby TCs (task contexts) can jump to the head of
the round robin queue causing indefinite starvation of pending tasks.
Posting a TC to a suspended RNC (remote node context) causes the
hardware to select that task first, but since the RNC is suspended the
scheduler proceeds to the next task in the expected round robin fashion,
restoring TC arbitration fairness.
Signed-off-by: Tomasz Chudy <tomasz.chudy@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dan Williams [Wed, 2 Mar 2011 19:49:26 +0000 (11:49 -0800)]
isci: rework timer api
Prepare the timer api for the arrival of dynamic creation and
destruction events from the core. It pretended to do this previously
but the core to date only used it in a static init-time only fashion.
This is an interim fix until a cleaner event queue can be developed.
1/ make all locking external to the api (add WARN_ONCE to verify)
2/ add a timer_destroy interface (to be used by the core)
3/ use del_timer_sync() prior to deallocating timer data
4/ delete the "timer_list" indirection, we only have timers allocated
for the isci_host
5/ fix detection of timer list allocation errors
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Dave Jiang [Wed, 23 Feb 2011 23:57:24 +0000 (15:57 -0800)]
isci: Make the driver copy data directly from and to sg for PIO
We can copy the data directly to and from sg for SATA PIO read operations.
There is no reason to involve the hardware SGL. In the process we also need
to kmap the sg because we don't know where that can come from.
We also do to not call phys_to_virt(). The driver already has the information.
We can just calculcate the appropriate offets.
Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Piotr Sawicki [Wed, 23 Feb 2011 08:09:14 +0000 (00:09 -0800)]
isci: fix for asserts during aborts/resets to SAS/SATA in APC mode
Sending aborts/resets to SAS/SATA targets in APC mode eventually causes
an assert in scic_sds_apc_agent_link_up(). We need to handle the hard reset
case for apc mode ports.
Signed-off-by: Piotr Sawicki <piotr.sawicki@intel.com> Signed-off-by: Dan Williams <dan.j.williams@intel.com>
projects / linux-beck.git / log