Stefan Haberland [Wed, 14 Oct 2015 09:01:05 +0000 (11:01 +0200)]
s390/dasd: fix list_del corruption after lcu changes
A summary unit check occurs when the lcu updates the PAV configuration
e.g. base PAV assignment or PAV mode at all. This requires the reset
of the drivers internal pavgroups. Therefore the alias devices are
flushed and moved via a temporary list to the active_devices list
where they are not associated with a pavgroup. In conjunction with
updates to the base device the pavgroup may be removed since both
base_list and alias_list are empty. Unfortunately during alias flush
and move to the active_device list from alias_list the pavgroup
pointer is not deleted in the device private structure. This leads to
a list del_corruption if another lcu_update tries to move the device
in the non existent pavgroup.
Fix by removing the pavgroup pointer after the alias device was moved
to the active_devices list.
Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
s390/spinlock: remove unneeded serializations at unlock
the kernel locks have aqcuire/release semantics. No operation done
after the lock can be "moved" before the lock and no operation before
the unlock can be moved after the unlock. But it is perfectly fine
that memory accesses which happen code wise after unlock are performed
within the critical section.
On s390x, reads are in-order with other reads (PoP section
"Storage-Operand Fetch References") and writes are in-order with
other writes (PoP section "Storage-Operand Store References"). Writes
are also in-order with reads to the same memory location (PoP section
"Storage-Operand Store References"). To other CPUs (and the channel
subsystem), reads additionally appear to be performed prior to reads or
writes that happen after them in the conceptual sequence (PoP section
"Relation between Operand Accesses").
So at least as observed by other CPUs and the channel subsystem, reads
inside the critical sections will not happen after unlock (and writes
are in-order anyway). That's exactly what we need for "RELEASE
operations" (memory-barriers.txt): "It guarantees that all memory
operations before the RELEASE operation will appear to happen before the
RELEASE operation with respect to the other components of the system."
Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-By: Sascha Silbe <silbe@linux.vnet.ibm.com>
[cross-reading and lot of improvements for the patch description] Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
s390/zcrypt: introduce state machine for the AP bus
Replace the two fields 'unregistered' and 'reset' with a device
state with 5 possible values. Introduce two events for the AP devices,
device poll and device timeout. With the state machine it is easier
to deal with device initialization and suspend/resume. Device polling
is simpler as well, the arkane 'flags' passing is gone.
Reviewd-by: Ingo Tuchscherer <ingo.tuchscherer@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
s390/zcrypt: use explicit return code for flushed requests
If a AP device is removed while messages are still pending, the requests
are cancelled by calling the message receive function with an error pointer
for the reply. The message type receive handler recognize this and create
a fake hardware error TYPE82_RSP_CODE / REP82_ERROR_MACHINE_FAILURE.
The message with the hardware error then causes a printk and a return
code of -EAGAIN.
Replace the intricate scheme with an explicit return code for this sitation
and avoid the error message.
Reviewd-by: Ingo Tuchscherer <ingo.tuchscherer@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Set the configuration timer at the end of the ap_scan_bus function.
Make use of setup_timer and remove some unnecessary add_timer, mod_timer
and del_timer_sync calls. Replace the complicated timer_pending, mod_timer
and add_timer code in ap_config_time_store with a simple mod_timer.
Reviewd-by: Ingo Tuchscherer <ingo.tuchscherer@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
If there are no devices on the AP bus there will not be a single
call to the per-device ap_bus_suspend function. Even worse,
there will not be a call to the per-device ap_bus_resume either
and the AP will fail so resume correctly.
Introduce a bus specific dev_pm_ops to suspend / resume the AP
bus related things. While we are at it, simplify the power management
code of the AP bus.
Reviewd-by: Ingo Tuchscherer <ingo.tuchscherer@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The ap_queue_messsage function will call device_unregister if the
unregistered field of the device has been set while trying to queue
a message. This races with other device_unregister calls, e.g. from
the ap_scan_bus. Remove the call to device_unregister from
ap_queue_message and let ap_scan_bus deal with it.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
s390/zcrypt: fix memory leak with ap configuration data
The ap_query_configuration function allocates the ap_config_info
structure, but there is no code to free the structure.
Allocate the structure in the module_init function and free it
again in module_exit.
While we are at it simplify a few functions in regard to the
ap configuration data.
Reviewed-by: Ingo Tuchscherer <ingo.tuchscherer@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
ap_test_queue, ap_query_facilities, __ap_query_functions all use
the same PQAP(TAPQ) command. Consolidate the three into a single
ap_test_queue function that returns the AP status and the 64-bit
result. The exception table entry for PQAP(TAPQ) can be avoided
if the T bit for the APFT facility is set only if test_facility(15)
indicated that the facility is present.
Integrate ap_query_function into ap_query queue to avoid calling
PQAP(TAPQ) twice.
Reviewed-by: Ingo Tuchscherer <ingo.tuchscherer@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Fri, 9 Oct 2015 11:48:03 +0000 (13:48 +0200)]
s390/etr,stp: fix possible deadlock on machine check
The first level machine check handler for etr and stp machine checks may
call queue_work() while in nmi context. This may deadlock e.g. if the
machine check happened when the interrupted context did hold a lock, that
also will be acquired by queue_work().
Therefore split etr and stp machine check handling into first and second
level handling. The second level handling will then issue the queue_work()
call in process context which avoids the potential deadlock.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Sebastian Ott [Fri, 9 Oct 2015 09:07:06 +0000 (11:07 +0200)]
s390/pci: reshuffle struct used to write debug data
zpci_err_insn writes stale stack content to the debugfs.
Ensure that the struct in zpci_err_insn is ordered in a way that
we don't have uninitialized holes in it. In addition to that
add the packed attribute.
Fixes: 3d8258e (s390/pci: move debug messages to debugfs) Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Tue, 6 Oct 2015 12:45:35 +0000 (14:45 +0200)]
s390/nmi: change type of mcck_interruption_code lowcore field
For some unknown reason the mcck_interruption_code field is defined
as array of two 32 bit values. Given that this actually is a 64 bit
field according to the architecture, change the type to u64.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Heiko Carstens [Sat, 15 Aug 2015 09:42:21 +0000 (11:42 +0200)]
s390/udelay: make udelay have busy loop semantics
When using systemtap it was observed that our udelay implementation is
rather suboptimal if being called from a kprobe handler installed by
systemtap.
The problem observed when a kprobe was installed on lock_acquired().
When the probe was hit the kprobe handler did call udelay, which set
up an (internal) timer and reenabled interrupts (only the clock comparator
interrupt) and waited for the interrupt.
This is an optimization to avoid that the cpu is busy looping while waiting
that enough time passes. The problem is that the interrupt handler still
does call irq_enter()/irq_exit() which then again can lead to a deadlock,
since some accounting functions may take locks as well.
If one of these locks is the same, which caused lock_acquired() to be
called, we have a nice deadlock.
This patch reworks the udelay code for the interrupts disabled case to
immediately leave the low level interrupt handler when the clock
comparator interrupt happens. That way no C code is being called and the
deadlock cannot happen anymore.
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
sparse does not understand the s390 specific hotpatch attribute and
floods the log with messages like
include/uapi/linux/swab.h:92:8: error: attribute 'hotpatch': unknown attribute
Let's just dont use it, if __CHECKER__ is defined.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
s390/cpumf: rework program parameter setting to detect guest samples
The program parameter can be used to mark hardware samples with
some token. Previously, it was used to mark guest samples only.
Improve the program parameter doubleword by combining two parts,
the leftmost LPP part and the rightmost PID part. Set the PID
part for processes by using the task PID.
To distinguish host and guest samples for the kernel (PID part
is zero), the guest must always set the program paramater to a
non-zero value. Use the leftmost bit in the LPP part of the
program parameter to be able to detect guest kernel samples.
[brueckner@linux.vnet.ibm.com]: Split __LC_CURRENT and introduced
__LC_LPP. Corrected __LC_CURRENT users and adjusted assembler parts.
And updated the commit message accordingly.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
s390/asm: make use of the OFFSET macro to define assember constants
The use of OFFSET instead of DEFINE makes the definitions in asm-offsets.c
more readable. While we are at it sort the defines for struct _lowcore
according to the field order and remove some unneeded defines.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The sclp console and tty code currently uses several message text
objects in a single message event to print several lines with one
SCCB. This causes the output of these lines to be fused into a
block which is noticeable when selecting text in the operating system
message panel.
Instead use several message events with a single message text object
each to print every line on its own. This changes the SCCB layout
from
struct sccb_header
struct evbuf_header
struct mdb_header
struct go
struct mto
...
struct mto
to
struct sccb_header
struct evbuf_header
struct mdb_header
struct go
struct mto
...
struct evbuf_header
struct mdb_header
struct go
struct mto
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
s390/entry: add assembler macro to conveniently tests under mask
Various functions in entry.S perform test-under-mask instructions
to test for particular bits in memory. Because test-under-mask uses
a mask value of one byte, the mask value and the offset into the
memory must be calculated manually. This easily introduces errors
and is hard to review and read.
Introduce the TSTMSK assembler macro to specify a mask constant and
let the macro calculate the offset and the byte mask to generate a
test-under-mask instruction. The benefit is that existing symbolic
constants can now be used for tests. Also the macro checks for
zero mask values and mask values that consist of multiple bytes.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Previously, the init task did not have an allocated FPU save area and
saving an FPU state was not possible. Now if the vector extension is
always enabled, provide a static FPU save area to save FPU states of
vector instructions that can be executed quite early.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
s390/fpu: always enable the vector facility if it is available
If the kernel detects that the s390 hardware supports the vector
facility, it is enabled by default at an early stage. To force
it off, use the novx kernel parameter. Note that there is a small
time window, where the vector facility is enabled before it is
forced to be off.
With enabling the vector facility by default, the FPU save and
restore functions can be improved. They do not longer require
to manage expensive control register updates to enable or disable
the vector enablement control for particular processes.
Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
s390/mm: try to avoid storage key operation in ptep_set_access_flags
The call to pgste_set_key in ptep_set_access_flags can be avoided
if the old pte is found to be valid at the time the new access
rights are set. The function that created the old, valid pte already
completed the required storage key operation.
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
s390/barrier: remove unnecessary serialization in atomics and bitops
The principles of operation states reads are in order, writes are in
order, writes can be reordered after reads, but no reads can be
reordered after writes.
The atomic and bitops variantes for z196 use the interlocked-access
facility instructions with a memory barrier before and after the
instruction. Because of the memory ordering the first barrier is
unnecessary and can be removed.
Acked-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
To be able to analyse problems in regard to hypervisor overhead
add a tracepoing for diagnose calls. It reports the number of
the diagnose issued, e.g.
The generic implementation for test_and_set_bit_lock in include/asm-generic
uses the standard test_and_set_bit operation. This is done with either a
'csg' or a 'loag' instruction. For both version the cache line is fetched
exclusively, even if the bit is already set. The result is an increase in
cache traffic, for a contented lock this is a bad idea.
Acked-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
mm: add architecture primitives for software dirty bit clearing
There are primitives to create and query the software dirty bits
in a pte or pmd. But the clearing of the software dirty bits is done
in common code with x86 specific page table functions.
Add the missing architecture primitives to clear the software dirty
bits to allow the feature to be used on non-x86 systems, e.g. the
s390 architecture.
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Sebastian Ott [Mon, 21 Sep 2015 16:40:33 +0000 (18:40 +0200)]
s390/cio: introduce pathmask_to_pos
We often need to correlate an 8 bit path mask with the position
in a channel path array. Introduce and use pathmask_to_pos for
that task.
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Sebastian Ott [Wed, 9 Sep 2015 08:29:59 +0000 (10:29 +0200)]
s390/cio: reactivate cmf after hibernate
During resume from hibernate we already reenable measurement block
updates on a per device basis. In addition to that we also need to
activate channel measurement globally using the set channel monitor
instruction.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Sebastian Ott [Mon, 7 Sep 2015 17:53:01 +0000 (19:53 +0200)]
s390/cio: use kmem_cache for extended measurement block allocation
Extended measurement blocks need to be 64 byte aligned. To achieve that
128 bytes for each measurement block are allocated and an align callback
returns a 64 byte aligned address inside this area.
Replace this code with kmem_cache allocations.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Sebastian Ott [Mon, 7 Sep 2015 17:52:31 +0000 (19:52 +0200)]
s390/cio: fix memleak in channel measurement
The measurement block for the extended measurement data is not freed when
switching off per device measurement. Free the measurement block after HW
stopped accessing it.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Sebastian Ott [Mon, 7 Sep 2015 17:52:06 +0000 (19:52 +0200)]
s390/cio: improve locking during cmbe allocation
During allocation of extended measurement blocks we check if the device is
already active for channel measurement and add the device to a list of
devices with active channel measurement. The check is done under ccwlock
protection and the list modification is guarded by a different lock.
To guarantee that both states are in sync make sure that both locks
are held during the allocation process (like it's already done for the
"normal" measurement block allocation).
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Sebastian Ott [Mon, 7 Sep 2015 17:51:39 +0000 (19:51 +0200)]
s390/cio: fix use after free in cmb processing
Devices with active channel measurement are included in a list. When a
device is removed without deactivating channel measurement first the
list_head is freed but still used. Fix this by making sure that
channel measurement is deactivated during device deregistration.
For devices that we deregister because they are no longer accessible
deactivating channel measurement will fail. In this case we can report
success because the FW will no longer access the measurement block.
In addition to these steps keep an extra device reference while
channel measurement is active.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Sebastian Ott [Tue, 15 Sep 2015 11:11:42 +0000 (13:11 +0200)]
s390/cio: use device_lock during cmb activation
Hold the device_lock during [de]activation of the channel measurement
block to synchronize concurrent usage of these functions.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Sebastian Ott [Mon, 7 Sep 2015 17:50:25 +0000 (19:50 +0200)]
s390/cio: cleanup cmb_enable sysfs attr
Ensure that we hold the ccwlock when accessing private data. Return errors
that occur during measurement enabling to userspace. Apply some cleanups
while at it.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The <linux/memblock.h> already provides for_each_mem_range() macro that
iterates through memblock areas from type_a and not included in type_b.
We can remove custom for_each_dump_mem_range() macro and use the
for_each_mem_range() instead.
Signed-off-by: Alexander Kuleshov <kuleshovmail@gmail.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
s390/barrier: avoid serialization in [smp_]rmb and [smp_]wmb
The principles of operation says:
The storage-operand fetch references of one instruction
occur after those of all preceding instructions and
before those of subsequent instructions, as observed
by other CPUs and by channel programs.
[...]
The CPU may fetch the operands of instructions before the
instructions are executed.
[...]
The CPU may delay placing results in storage.
[...]
the results of one instruction are placed in storage after
the results of all preceding instructions have been placed
in storage and before any results of the succeeding
instructions are stored, as observed by other CPUs and by
the channel subsystem.
which boils down to:
- reads are in order
- writes are in order
- reads can happen earlier
- writes can happen later
By definition (see memory-barrier.txt) read barriers orders
reads vs reads and write barriers orders writes agains writes.
but neither of these orders reads vs. writes.
That means we can implement smp_wmb,smp_rmb,wmb and rmb as
simple compiler barriers. To avoid reviewing all driver code
for correct barrier usage we keep dma_[rw]mb as serialization
for now.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
By definition smp_wmb only orders writes against writes. (Finish all
previous writes, and do not start any future write). To protect the
vdso init code against early reads on other CPUs, let's use a full
smp_mb at the end of vdso init. As right now smp_wmb is implemented
as full serialization, this needs no stable backport, but this change
will be necessary if we reimplement smp_wmb.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
_raw_write_lock_wait first sets the high order bit to indicate a
pending writer and then waits for the reader to drop to zero.
smp_rmb by definition only orders reads against reads. Let's use
a full smp_mb instead. As right now smp_rmb is implemented
as full serialization, this needs no stable backport, but this
patch will be necessary if we reimplement smp_rmb.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
We were able to reduce the CPU overhead of big paging scenarios
when announcing our paging disks as non-rotational.
Almost all dasd devices are implemented in storage servers with
cache, raid, striping and lots of magic. There is no point in
optimizing the disk schedulers and swap code for a single platter
moving arm rotational disks. Given the complexity of the setup
and the fact that this change is mostly to disable the additional
overhead in swap code, lets keep the other functionality unchanged
and do not disable the this device as entropy source - unlike other
non-rotational devices.
Suggested-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
s390/zcrypt: enable odd RSA modulus sizes in CRT format
In the past only even modulus sizes were allowed for RSA keys in
CRT format. This restriction was based on limited RSA key generation
on older crypto adapters that provides only even modulus sizes. This
restriction is not valid any more.
Revoke restrictions that crypto requests can be serviced with odd
RSA modulus length in CRT format.
Signed-off-by: Ingo Tuchscherer <ingo.tuchscherer@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Linus Torvalds [Tue, 13 Oct 2015 18:31:03 +0000 (11:31 -0700)]
Merge tag 'nfsd-4.3-2' of git://linux-nfs.org/~bfields/linux
Pull nfsd fixes from Bruce Fields:
"Two nfsd fixes, one for an RDMA crash, one for a pnfs/block protocol
bug"
* tag 'nfsd-4.3-2' of git://linux-nfs.org/~bfields/linux:
svcrdma: Fix NFS server crash triggered by 1MB NFS WRITE
nfsd/blocklayout: accept any minlength
Linus Torvalds [Tue, 13 Oct 2015 17:09:59 +0000 (10:09 -0700)]
Merge tag 'iommu-fixes-v4.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu
Pull IOMMU fixes from Joerg Roedel:
"A few fixes piled up:
- Fix for a suspend/resume issue where PCI probing code overwrote
dev->irq for the MSI irq of the AMD IOMMU.
- Fix for a kernel crash when a 32 bit PCI device was assigned to a
KVM guest.
- Fix for a possible memory leak in the VT-d driver
- A couple of fixes for the ARM-SMMU driver"
* tag 'iommu-fixes-v4.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu:
iommu/amd: Fix NULL pointer deref on device detach
iommu/amd: Prevent binding other PCI drivers to IOMMU PCI devices
iommu/vt-d: Fix memory leak in dmar_insert_one_dev_info()
iommu/arm-smmu: Use correct address mask for CMD_TLBI_S2_IPA
iommu/arm-smmu: Ensure IAS is set correctly for AArch32-capable SMMUs
iommu/io-pgtable-arm: Don't use dma_to_phys()
Linus Torvalds [Tue, 13 Oct 2015 16:45:21 +0000 (09:45 -0700)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"I got a bit behind last week, so here is a delayed fixes pull:
- a bunch of radeon/amd gpu fixes
- some nouveau regression fixes (ppc bios reading and runtime pm fix)
- one drm core oops fix
- two qxl locking fixes
- one qxl regression fix"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/nouveau/bios: fix OF loading
drm/nouveau/fbcon: take runpm reference when userspace has an open fd
drm/nouveau/nouveau: Disable AGP for SiS 761
drm/nouveau/display: allow up to 16k width/height for fermi+
drm/nouveau/bios: translate devinit pri/sec i2c bus to internal identifiers
drm: Fix locking for sysfs dpms file
drm/amdgpu: fix memory leak in amdgpu_vm_update_page_directory
drm/amdgpu: fix 32-bit compiler warning
drm/qxl: avoid dependency lock
drm/qxl: avoid buffer reservation in qxl_crtc_page_flip
drm/qxl: fix framebuffer dirty rectangle tracking.
drm/amdgpu: flag iceland as experimental
drm/amdgpu: check before checking pci bridge registers
drm/amdgpu: fix num_crtc on CZ
drm/amdgpu: restore the fbdev mode in lastclose
drm/radeon: restore the fbdev mode in lastclose
drm/radeon: add quirk for ASUS R7 370
drm/amdgpu: add pm sysfs files late
drm/radeon: add pm sysfs files late
Russell King [Fri, 9 Oct 2015 19:43:33 +0000 (20:43 +0100)]
crypto: ahash - ensure statesize is non-zero
Unlike shash algorithms, ahash drivers must implement export
and import as their descriptors may contain hardware state and
cannot be exported as is. Unfortunately some ahash drivers did
not provide them and end up causing crashes with algif_hash.
This patch adds a check to prevent these drivers from registering
ahash algorithms until they are fixed.
Cc: stable@vger.kernel.org Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Chuck Lever [Mon, 12 Oct 2015 14:53:39 +0000 (10:53 -0400)]
svcrdma: Fix NFS server crash triggered by 1MB NFS WRITE
Now that the NFS server advertises a maximum payload size of 1MB
for RPC/RDMA again, it crashes in svc_process_common() when NFS
client sends a 1MB NFS WRITE on an NFS/RDMA mount.
The server has set up a 259 element array of struct page pointers
in rq_pages[] for each incoming request. The last element of the
array is NULL.
When an incoming request has been completely received,
rdma_read_complete() attempts to set the starting page of the
incoming page vector:
But the value of page_no has already accounted for head->hdr_count.
Thus rq_respages now points past the end of the incoming pages.
For NFS WRITE operations smaller than the maximum, this is harmless.
But when the NFS WRITE operation is as large as the server's max
payload size, rq_respages now points at the last entry in rq_pages,
which is NULL.
Fixes: cc9a903d915c ('svcrdma: Change maximum server payload . . .') BugLink: https://bugzilla.linux-nfs.org/show_bug.cgi?id=270 Signed-off-by: Chuck Lever <chuck.lever@oracle.com> Reviewed-by: Sagi Grimberg <sagig@dev.mellanox.co.il> Reviewed-by: Steve Wise <swise@opengridcomputing.com> Reviewed-by: Shirley Ma <shirley.ma@oracle.com> Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Dave Airlie [Mon, 12 Oct 2015 03:59:04 +0000 (13:59 +1000)]
Merge branch 'linux-4.3' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes
Nothing too crazy here, a couple of regression fixes + runpm/fbcon
race fix.
* 'linux-4.3' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
drm/nouveau/bios: fix OF loading
drm/nouveau/fbcon: take runpm reference when userspace has an open fd
drm/nouveau/nouveau: Disable AGP for SiS 761
drm/nouveau/display: allow up to 16k width/height for fermi+
drm/nouveau/bios: translate devinit pri/sec i2c bus to internal identifiers
Ilia Mirkin [Fri, 2 Oct 2015 03:41:21 +0000 (23:41 -0400)]
drm/nouveau/bios: fix OF loading
Currently OF bios load fails for a few reasons:
- checksum failure
- bios size too small
- no PCIR header
- bios length not a multiple of 4
In this change, we resolve all of the above by ignoring any checksum
failures (since OF VBIOS tends not to have a checksum), and faking the
PCIR data when loading from OF.
Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Fri, 2 Oct 2015 04:03:19 +0000 (14:03 +1000)]
drm/nouveau/fbcon: take runpm reference when userspace has an open fd
We need to do this in order to prevent accesses to the device while it's
powered down. Userspace may have an mmap of the fb, and there's no good
way (that I know of) to prevent it from touching the device otherwise.
This fixes some nasty races between runpm and plymouth on some systems,
which result in the GPU getting very upset and hanging the boot.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com> Cc: stable@vger.kernel.org
Ondrej Zary [Mon, 14 Sep 2015 19:19:57 +0000 (21:19 +0200)]
drm/nouveau/nouveau: Disable AGP for SiS 761
SiS 761 chipset does not support AGP cards but has AGP capability (for
the onboard video). At least PC Chips A31G board using this chipset has
an AGP-like AGPro slot that's wired to the PCI bus. Enabling AGP will
fail (GPU lockup and software fbcon, X11 hangs).
Add support for matching just the host bridge in nvkm_device_agp_quirks
and add entry for SiS 761 with mode 0 (AGP disabled).
Signed-off-by: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Linus Torvalds [Sun, 11 Oct 2015 17:16:59 +0000 (10:16 -0700)]
Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"Three trivial commits:
- Fix a kerneldoc regression
- Export handle_bad_irq to unbreak a driver in next
- Add an accessor for the of_node field so refactoring in next does
not depend on merge ordering"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqdomain: Add an accessor for the of_node field
genirq: Fix handle_bad_irq kerneldoc comment
genirq: Export handle_bad_irq
Linus Torvalds [Sun, 11 Oct 2015 17:02:30 +0000 (10:02 -0700)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is a set of three bug fixes, two of which are regressions from
recent updates (the 3ware one from 4.1 and the device handler fixes
from 4.2)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
3w-9xxx: don't unmap bounce buffered commands
scsi_dh: Use the correct module name when loading device handler
libiscsi: Fix iscsi_check_transport_timeouts possible infinite loop
Linus Torvalds [Sat, 10 Oct 2015 18:17:45 +0000 (11:17 -0700)]
Merge tag 'usb-4.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB and PHY fixes and quirk updates for 4.3-rc5.
Nothing major here, full details in the shortlog, and all of these
have been in linux-next for a while"
* tag 'usb-4.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: Add device quirk for Logitech PTZ cameras
USB: chaoskey read offset bug
USB: Add reset-resume quirk for two Plantronics usb headphones.
usb: renesas_usbhs: Add support for R-Car H3
usb: renesas_usbhs: fix build warning if 64-bit architecture
usb: gadget: bdc: fix memory leak
phy: berlin-sata: Fix module autoload for OF platform driver
phy: rockchip-usb: power down phy when rockchip phy probe
phy: qcom-ufs: fix build error when the component is built as a module
Linus Torvalds [Sat, 10 Oct 2015 18:09:55 +0000 (11:09 -0700)]
Merge tag 'tty-4.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are a few bug fixes for the tty core that resolve reported
issues, and some serial driver fixes as well (including the
much-reported imx driver problem)
All of these have been in linux-next with no reported problems"
* tag 'tty-4.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
drivers/tty: require read access for controlling terminal
serial: 8250: add uart_config entry for PORT_RT2880
tty: fix data race on tty_buffer.commit
tty: fix data race in tty_buffer_flush
tty: fix data race in flush_to_ldisc
tty: fix stall caused by missing memory barrier in drivers/tty/n_tty.c
serial: atmel: fix error path of probe function
tty: don't leak cdev in tty_cdev_add()
Revert "serial: imx: remove unbalanced clk_prepare"
Linus Torvalds [Sat, 10 Oct 2015 18:03:31 +0000 (11:03 -0700)]
Merge tag 'staging-4.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging fixes from Greg KH:
"Here are two tiny staging tree fixes for 4.3-rc5.
One fixes the broken speakup subsystem as reported by a user, and the
other removes an entry in the MAINTAINERS file for a developer that
doesn't want to be listed anymore"
* tag 'staging-4.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: speakup: fix speakup-r regression
MAINTAINERS: Remove myself as nvec co-maintainer
Linus Torvalds [Sat, 10 Oct 2015 17:58:27 +0000 (10:58 -0700)]
Merge tag 'char-misc-4.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are some small fixes for some misc drivers that resolve some
reported issues. All of these have been linux-next for a while"
* tag 'char-misc-4.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
mcb: Fix error handling in mcb_pci_probe()
mei: hbm: fix error in state check logic
nvmem: sunxi: Check for memory allocation failure
nvmem: core: Fix memory leak in nvmem_cell_write
nvmem: core: Handle shift bits in-place if cell->nbits is non-zero
nvmem: core: fix the out-of-range leak in read/write()
Linus Torvalds [Sat, 10 Oct 2015 17:31:13 +0000 (10:31 -0700)]
Merge branch 'stable/for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb
Pull swiotlb fixlet from Konrad Rzeszutek Wilk:
"Enable the SWIOTLB under 32-bit PAE kernels.
Nowadays most distros enable this due to CONFIG_HYPERVISOR|XEN=y which
select SWIOTLB. But for those that are not interested in
virtualization and wanting to use 32-bit PAE kernels and wanting to
have working DMA operations - this configures it for them"
* 'stable/for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb:
swiotlb: Enable it under x86 PAE
Trond Myklebust [Fri, 9 Oct 2015 17:44:34 +0000 (13:44 -0400)]
namei: results of d_is_negative() should be checked after dentry revalidation
Leandro Awa writes:
"After switching to version 4.1.6, our parallelized and distributed
workflows now fail consistently with errors of the form:
T34: ./regex.c:39:22: error: config.h: No such file or directory
From our 'git bisect' testing, the following commit appears to be the
possible cause of the behavior we've been seeing: commit 766c4cbfacd8"
Al Viro says:
"What happens is that 766c4cbfacd8 got the things subtly wrong.
We used to treat d_is_negative() after lookup_fast() as "fall with
ENOENT". That was wrong - checking ->d_flags outside of ->d_seq
protection is unreliable and failing with hard error on what should've
fallen back to non-RCU pathname resolution is a bug.
Unfortunately, we'd pulled the test too far up and ran afoul of
another kind of staleness. The dentry might have been absolutely
stable from the RCU point of view (and we might be on UP, etc), but
stale from the remote fs point of view. If ->d_revalidate() returns
"it's actually stale", dentry gets thrown away and the original code
wouldn't even have looked at its ->d_flags.
What we need is to check ->d_flags where 766c4cbfacd8 does (prior to
->d_seq validation) but only use the result in cases where we do not
discard this dentry outright"
Linus Torvalds [Sat, 10 Oct 2015 01:39:04 +0000 (18:39 -0700)]
Merge tag 'pm+acpi-4.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI fixes from Rafael Wysocki:
"These are four fixes for bugs in the devfreq and cpufreq subsystems,
including two regression fixes (one for a recent regression and one
for a problem introduced in 4.2).
Specifics:
- Two fixes for cpufreq regressions, an acpi-cpufreq driver one
introduced during the 4.2 cycle when we started to preserve cpufreq
directories for offline CPUs and a general one introduced recently
(Srinivas Pandruvada).
- Two devfreq fixes, one for a double kfree() in an error code path
and one for a confusing sysfs-related failure (Geliang Tang, Tobias
Jakobi)"
* tag 'pm+acpi-4.3-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: prevent lockup on reading scaling_available_frequencies
cpufreq: acpi_cpufreq: prevent crash on reading freqdomain_cpus
PM / devfreq: fix double kfree
PM / devfreq: Fix governor_store()
Linus Torvalds [Fri, 9 Oct 2015 23:58:11 +0000 (16:58 -0700)]
Merge tag 'dm-4.3-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull dm fixes from Mike Snitzer:
"Three stable fixes:
- DM core AB-BA deadlock fix in the device destruction path (vs
device creation's DM table swap).
- DM raid fix to properly round up the region_size to the next
power-of-2.
- DM cache fix for a NULL pointer seen while switching from the
"cleaner" cache policy.
Two fixes for regressions introduced during the 4.3 merge:
- request-based DM error propagation regressed due to incorrect
changes introduced when adding the bi_error field to bio.
- DM snapshot fix to only support snapshots that overflow if the
client (e.g. lvm2) is prepared to deal with the associated
snapshot status interface change"
* tag 'dm-4.3-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm snapshot: add new persistent store option to support overflow
dm cache: fix NULL pointer when switching from cleaner policy
dm: fix request-based dm error reporting
dm raid: fix round up of default region size
dm: fix AB-BA deadlock in __dm_destroy()
Linus Torvalds [Fri, 9 Oct 2015 23:39:35 +0000 (16:39 -0700)]
Merge branch 'for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
"These are small and assorted. Neil's is the oldest, I dropped the
ball thinking he was going to send it in"
* 'for-linus-4.3' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: support NFSv2 export
Btrfs: open_ctree: Fix possible memory leak
Btrfs: fix deadlock when finalizing block group creation
Btrfs: update fix for read corruption of compressed and shared extents
Btrfs: send, fix corner case for reference overwrite detection
Linus Torvalds [Fri, 9 Oct 2015 22:54:14 +0000 (15:54 -0700)]
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"The fixes for this week include one small patch that was years in the
making and that finally fixes using all eight CPUs on exynos542x.
The rest are lots of minor changes for sunxi, imx, exynos and shmobile
- fixing the minimum voltage for Allwinner A20
- thermal boot issue on SMDK5250.
- invalid clock used for FIMD IOMMU.
- audio on Renesas r8a7790/r8a7791
- invalid clock used for FIMD IOMMU
- LEDs on exynos5422-odroidxu3-common
- usb pin control for imx-rex
- imx53: fix PMIC interrupt level
- a Makefile typo"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: dts: Fix wrong clock binding for sysmmu_fimd1_1 on exynos5420
ARM: dts: Fix bootup thermal issue on smdk5250
ARM: shmobile: r8a7791 dtsi: Add CPG/MSTP Clock Domain for sound
ARM: shmobile: r8a7790 dtsi: Add CPG/MSTP Clock Domain for sound
arm-cci500: Don't enable PMU driver by default
ARM: dts: fix usb pin control for imx-rex dts
ARM: imx53: qsrb: fix PMIC interrupt level
ARM: imx53: include IRQ dt-bindings header
ARM: dts: add suspend opp to exynos4412
ARM: dts: Fix LEDs on exynos5422-odroidxu3
ARM: EXYNOS: reset Little cores when cpu is up
ARM: dts: Fix Makefile target for sun4i-a10-itead-iteaduino-plus
ARM: dts: sunxi: Raise minimum CPU voltage for sun7i-a20 to meet SoC specifications
Mike Snitzer [Thu, 8 Oct 2015 22:05:41 +0000 (18:05 -0400)]
dm snapshot: add new persistent store option to support overflow
Commit 76c44f6d80 introduced the possibly for "Overflow" to be reported
by the snapshot device's status. Older userspace (e.g. lvm2) does not
handle the "Overflow" status response.
Fix this incompatibility by requiring newer userspace code, that can
cope with "Overflow", request the persistent store with overflow support
by using "PO" (Persistent with Overflow) for the snapshot store type.
Joerg Roedel [Fri, 9 Oct 2015 14:23:33 +0000 (16:23 +0200)]
iommu/amd: Fix NULL pointer deref on device detach
When a device group is detached from its domain, the iommu
core code calls into the iommu driver to detach each device
individually.
Before this functionality went into the iommu core code, it
was implemented in the drivers, also in the AMD IOMMU
driver as the device alias handling code.
This code is still present, as there might be aliases that
don't exist as real PCI devices (and are therefore invisible
to the iommu core code).
Unfortunatly it might happen now, that a device is unbound
multiple times from its domain, first by the alias handling
code and then by the iommu core code (or vice verca).
This ends up in the do_detach function which dereferences
the dev_data->domain pointer. When the device is already
detached, this pointer is NULL and we get a kernel oops.
Removing the alias code completly is not an option, as that
would also remove the code which handles invisible aliases.
The code could be simplified, but this is too big of a
change outside the merge window.
For now, just check the dev_data->domain pointer in
do_detach and bail out if it is NULL.
Reported-by: Andreas Hartmann <andihartmann@freenet.de> Signed-off-by: Joerg Roedel <jroedel@suse.de>
Jiang Liu [Fri, 9 Oct 2015 14:07:31 +0000 (22:07 +0800)]
iommu/amd: Prevent binding other PCI drivers to IOMMU PCI devices
AMD IOMMU driver makes use of IOMMU PCI devices, so prevent binding other
PCI drivers to IOMMU PCI devices.
This fixes a bug reported by Boris that system suspend/resume gets broken
on AMD platforms. For more information, please refer to:
https://lkml.org/lkml/2015/9/26/89
Fixes: 991de2e59090 ("PCI, x86: Implement pcibios_alloc_irq() and pcibios_free_irq()") Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Signed-off-by: Joerg Roedel <jroedel@suse.de>
Marc Zyngier [Fri, 9 Oct 2015 14:50:11 +0000 (15:50 +0100)]
irqdomain: Add an accessor for the of_node field
As we're about to remove the of_node field from the irqdomain
structure, introduce an accessor for it. Subsequent patches
will take care of the actual repainting.
Joe Thornber [Fri, 9 Oct 2015 13:03:38 +0000 (14:03 +0100)]
dm cache: fix NULL pointer when switching from cleaner policy
The cleaner policy doesn't make use of the per cache block hint space in
the metadata (unlike the other policies). When switching from the
cleaner policy to mq or smq a NULL pointer crash (in dm_tm_new_block)
was observed. The crash was caused by bugs in dm-cache-metadata.c
when trying to skip creation of the hint btree.
The minimal fix is to change hint size for the cleaner policy to 4 bytes
(only hint size supported).
Signed-off-by: Joe Thornber <ejt@redhat.com> Signed-off-by: Mike Snitzer <snitzer@redhat.com> Cc: stable@vger.kernel.org
Daniel Vetter [Tue, 29 Sep 2015 07:56:53 +0000 (09:56 +0200)]
drm: Fix locking for sysfs dpms file
With atomic drivers we need to make sure that (at least in general)
property reads hold the right locks. But the legacy dpms property is
special and can be read locklessly. Since userspace loves to just
randomly look at that all the time (like with "status") do that.
To make it clear that we play tricks use the READ_ONCE compiler
barrier (and also for paranoia).
Note that there's not really anything bad going on since even with the
new atomic paths we eventually end up not chasing any pointers (and
hence possibly freed memory and other fun stuff). The locking WARNING
has been added in
Dave Airlie [Fri, 9 Oct 2015 00:06:18 +0000 (10:06 +1000)]
Merge branch 'drm-fixes-4.3' of git://people.freedesktop.org/~agd5f/linux into drm-fixes
radeon and amdgpu fixes for 4.3. Highlights:
- Move pm sysfs setup later in the driver init process to avoid
problems with laptop scripts attempting to change pm settings
before the driver has finished setting up the pm hardware.
- Fix console restore if a drm app (e.g. X) is forcibly killed
- Flag iceland support as experimental for now
- Misc bug fixes
* 'drm-fixes-4.3' of git://people.freedesktop.org/~agd5f/linux:
drm/amdgpu: fix memory leak in amdgpu_vm_update_page_directory
drm/amdgpu: fix 32-bit compiler warning
drm/amdgpu: flag iceland as experimental
drm/amdgpu: check before checking pci bridge registers
drm/amdgpu: fix num_crtc on CZ
drm/amdgpu: restore the fbdev mode in lastclose
drm/radeon: restore the fbdev mode in lastclose
drm/radeon: add quirk for ASUS R7 370
drm/amdgpu: add pm sysfs files late
drm/radeon: add pm sysfs files late
Mikulas Patocka [Thu, 1 Oct 2015 19:17:43 +0000 (15:17 -0400)]
crash in md-raid1 and md-raid10 due to incorrect list manipulation
The commit 55ce74d4bfe1b9444436264c637f39a152d1e5ac (md/raid1: ensure
device failure recorded before write request returns) is causing crash in
the LVM2 testsuite test shell/lvchange-raid.sh. For me the crash is 100%
reproducible.
The reason for the crash is that the newly added code in raid1d moves the
list from conf->bio_end_io_list to tmp, then tests if tmp is non-empty and
then incorrectly pops the bio from conf->bio_end_io_list (which is empty
because the list was alrady moved).
cpufreq: prevent lockup on reading scaling_available_frequencies
When scaling_available_frequencies is read on an offlined cpu, then
either lockup or junk values are displayed. This is caused by
freed freq_table, which policy is using.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
cpufreq: acpi_cpufreq: prevent crash on reading freqdomain_cpus
When freqdomain_cpus attribute is read from an offlined cpu, it will
cause crash. This change prevents calling cpufreq_show_cpus when
policy driver_data is NULL.
mmc: sdhci-of-at91: use SDHCI_QUIRK2_NEED_DELAY_AFTER_INT_CLK_RST quirk
The Atmel sdhci device needs the
SDHCI_QUIRK2_NEED_DELAY_AFTER_INT_CLK_RST quirk. Without it, the
internal clock could never stabilised when changing the sd clock
frequency.
projects / linux-beck.git / log