Staging: rtl8188eu: rtw_efuse: Do not print message if kzalloc() failed.

Do not print message if kzalloc() failed.
kzalloc() has its own messages. So no need to add extra one.

Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8188eu: Do not print message if kzalloc() failed.

Do not print message if kzalloc() failed.
kzalloc() has its own messages. So no need to add extra one.

Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

rtl8188eu: Add spaces around arithmetic operators

This fixes the checkpatch.pl issue: CHECK: spaces preferred around that '+'

Signed-off-by: Kyle Kuffermann <kyle.kuffermann@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: remove PWR_BASEADDR_* macro definitions and "base" member of wl_pwr_cfg structure

These macros and "base" member of wl_pwr_cfg structure
are used only to produce debug output.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: remove PWR_INTF_*_MSK macro definitions and interface_mask of wl_pwr_cfg structure

This driver is intended only for usb devices.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: remove PWR_FAB_*_MSK macro definitions and fab_msk of wl_pwr_cfg structure

fab_msk used for marking commands
for devices of a certain manufacturer.

However, always used only PWR_FAB_ALL_MSK value of fab_msk.

Most likely, such mark is useless.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: remove FabVersion member of odm_dm_struct struct

Value of this variable is hardcoded
and used only to produce debug output.
Probably, FabVersion is useless.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: remove chip_type of the adapter structure

chip_type variable is unnecessary here,
because this driver is only for one chip
and it is not used after initialization.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: replace (a == NULL) to (!a) in rtw_drv_init

It is a checkpatch cleanups:
CHECK: Comparasion to NULL could be written ...

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: remove unnecessary debug output from os_dep/usb_intf.c

Debug output in rtw_drw_init is excess

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: remove unused macros from include/basic_types.h

FIELD_OFFSET, READEF1BYTE, READEF2BYTE, READEF4BYTE
WRITEEF1BYTE, WRITEEF2BYTE, WRITEEF4BYTE are removed.

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: remove unused include/ieee80211_ext.h

This file is not used for the driver compiling

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: FIELD_OFFSET macro replaced by offsetof macro

FIELD_OFFSET and offsetof macro are equal

Signed-off-by: Ivan Safonov <insafonov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: os_dep: Remove NULL test before vfree

vfree frees the virtually continuous memory area starting at addr.
If addr is NULL, no operation is performed. So NULL test is not needed
before vfree.

This was done using Coccinelle:

@@
expression x;
@@
-if (x != NULL)
    vfree(x);

@@
expression x;
@@

-if (x != NULL) {
vfree(x);
x = NULL;
-}

Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: core: Remove NULL test before vfree

vfree frees the virtually continuous memory area starting at addr.
If addr is NULL, no operation is performed. So NULL test is not needed
before vfree.

This was done using Coccinelle:

@@
expression x;
@@
-if (x != NULL)
    vfree(x);

@@
expression x;
@@

-if (x != NULL) {
vfree(x);
x = NULL;
-}

Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: core: Remove useless return variables

This patch removes unnecessary return variables and compresses the
return logic.
The coccinelle script that finds and fixes this issue is:

@@ type T; identifier i,f; constant C; @@
- T i;
...when != i
when strict
( return -C;
|
- i =
+ return
f(...);
- return i;
)

Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: os_dep: Remove useless return variables

This patch removes unnecessary return variables and compresses the
return logic.
The coccinelle script that finds and fixes this issue is:
@@ type T; identifier i,f; constant C; @@
- T i;
...when != i
when strict
( return -C;
|
- i =
+ return
f(...);
- return i;
)

Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: core: Remove casts of pointer to same type

Casting a pointer to a pointer of the same type is unnecessary, so remove
these unnecessary casts.

This was done with Coccinelle:

@@
type T;
T *ptr;
@@
- (T *)ptr
+ ptr

Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: hal: Drop Useless Initialization

Removed initialisation of a varible if it is immediately reassigned.
Changes were made using Coccinelle.
@bad@
identifier i;
position p;
@@

i =@p <+...i...+>;

@@
type T;
constant C;
expression e;
identifier i;
position p != bad.p;
@@
T i
- = C
;
i =@p e;

Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8188eu: Remove unnecessary parantheses

Removed parantheses on the right hand side of assignments as they are
not needed.

This was done with Coccinelle:

@@ expression a, b; @@

a =
- (
b
- )
;

Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: sm750fb: Remove unused functions

The functions dviGetDeviceID and dviGetVendorID are not used anywhere in
the kernel so remove them. Also, remove their function prototypes.
Grepped to find occurences.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: sm750fb: Remove leading and trailing whitespace.

Remove leading and trailing whitespace.

Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: convert pr_err() to dev_err()

Replace pr_err() calls with respective dev_err() counterpart.
Change is safe since pdev is not NULL, this was identified by hand.
Semantic patch used to detect and apply the transformation:

@r exists@
identifier f,s,i;
position p;
@@

f(...,struct s *i,...) {
  <+...
  pr_err@p(...)
  ...+>
}

@s@
identifier r.s, dev;
@@

struct s {
...
struct device dev;
...
};

@t@
identifier r.i, s.dev;
expression fmt;
position r.p;
@@

- pr_err@p(
+ dev_err(&i->dev,
fmt, ...);

Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: Remove Unused macro

The macro PEEK32 is used nowhere in the file. Hence,removed.

Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: Use pcim_enable_device()

Devm_ functions allocate memory that is released when a driver
detaches.
Replace pci_enable_device with the managed pcim_enable_device
and remove corresponding pci_disable_device from probe and
suspend functions of a pci_dev.

Also, an unnecessary label has been removed by replacing it
with a direct return statement.

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: Replace kzalloc with devm_kzalloc

Devm_ functions allocate memory that is released when a driver
detaches.
Replace kzalloc with devm_kzalloc and remove corresponding
kfrees from probe and remove functions of a pci_dev.

Also, an unnecessary label has been removed by replacing it
with a direct return statement.

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: Remove unnecessary pci_set_drvdata()

Unnecessary pci_set_drvdata() has been removed since the driver
core clears the driver data to NULL after device release or on
probe failure. There is no need to manually clear the device
driver data to NULL.

The Coccinelle semantic patch used to make this change is as follows:
//<smpl>
@@
struct pci_dev *pci;
@@
- pci_set_drvdata(pci, NULL);
//</smpl>

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: sm750fb: Remove parentheses from return arguments

Remove unnecessary parentheses from return arguments.

The Coccinelle semantic patch that makes this change is as follows:

// <smpl>
@@
identifier i;
constant c;
@@

return
- (
    \(i\|-i\|i(...)\|c\)
- )
  ;
// </smpl>

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: most: hdm-usb: Remove invalid reference error

commit e3479f77("staging: most: hdm-usb: Remove create_workqueue()")
cancel_work_sync(&anchor->clear_work_obj) is introduced after freeing
`anchor` causing a invalid reference error. This patch removes this
error by shifting the call to cancel_work_sync before freeing
`anchor`.

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rts5208: Change form of NULL comparisons

Change null comparisons of the form x == NULL to !x.
This was done using Coccinelle.

@@
expression e;
@@
- e == NULL
+ !e

Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rts5208: Remove NULL test before vfree

vfree frees the virtually continuous memory area starting at addr.
If addr is NULL, no operation is performed. So NULL test is not needed
before vfree.

This was done using Coccinelle:

@@
expression x;
@@
-if (x != NULL)
    vfree(x);

@@
expression x;
@@

-if (x != NULL) {
vfree(x);
x = NULL;
-}

Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rts5208: simplify NULL tests

Replace direct comparisons to NULL i.e. 'x == NULL' with '!x' for
consistency. Coccinelle semantic patch used:

@@
identifier func;
expression x;
statement Z;
@@

x = func(...);

if (
(
+ !
x
- == NULL
|
+ !
- NULL ==
x
)
   ) Z

Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rts5208: Use min instead of ternary operator

This patch replaces ternary operator with macro min as it shorter and
thus increases code readability. Macro min returns the minimum of the
two compared values.
Made a semantic patch for changes:

@@
type T;
T x;
T y;
@@
(
- x < y ? x : y
+ min(x,y)
|
- x > y ? x : y
+ max(x,y)
)

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rts5208: rtsx_transport.c: Drop void pointer cast

Void pointers need not be cast to other pointer types.
Semantic patch used:

@r@
expression x;
void *e;
type T;
identifier f;
@@

(
  *((T *)e)
|
  ((T *)x) [...]
|
  ((T *)x)->f
|
- (T *)
  e
)

Signed-off-by: Janani Ravichandran <janani.rvchndrn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rts5208: rtsx.c: Drop unneeded void pointer cast

Void pointers need not be cast to other pointer types.
Semantic patch used:

@r@
expression x;
void *e;
type T;
identifier f;
@@

(
  *((T *)e)
|
  ((T *)x) [...]
|
  ((T *)x)->f
|
- (T *)
  e
)

Signed-off-by: Janani Ravichandran <janani.rvchndrn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rts5208: Remove unnecessary pci_set_drvdata()

Unnecessary pci_set_drvdata() has been removed since the driver
core clears the driver data to NULL after device release or on
probe failure. There is no need to manually clear the device
driver data to NULL.

The Coccinelle semantic patch used to make this change is as follows:
//<smpl>
@@
struct pci_dev *pci;
@@
- pci_set_drvdata(pci, NULL);
//</smpl>

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rts5208: Remove unnecessary parentheses

Problem found using checkpatch.pl
CHECK: Unnecessary parentheses around chip->ms_card

Signed-off-by: Dilek Uzulmez <dilekuzulmez@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rts5208: Prefer using BIT macro

Replace all instances of bit shifting on 1 with the BIT(x) macro.
This was done using Coccinelle.

@@ int c; @@
- (1 << c)
+ BIT(c)

Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rts5208: Removed unnecessary return variable

This patch removes unnecessary return variables in switch statements.
This was done with Coccinelle:

@@ local idexpression ret; expression e1,e2; identifier label;
@@
switch ( ... ) {
case label : ...
- ret = e1;
- break;
+ return e1;
... default: ...
- ret = e2;
+ return e2;
... }
... when != ret
- return ret;
@@ type T; identifier x; @@
- T x;
... when != x

Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: media: davinci_vpfe: Remove unnecessary else after return

This patch fixes the checkpatch warning that else is not generally
useful after a break or return.

This was done using Coccinelle:
@@
expression e2;
statement s1;
@@
if(e2) { ... return ...; }
-else
         s1

Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: media: davinci_vpfe: dm365_ipipe_hw: Remove unnecessary else after return

This patch fixes the checkpatch warning that else is not generally
useful after a break or return.

This was done using Coccinelle:
@@
expression e2;
statement s1;
@@
if(e2) { ... return ...; }
-else
         s1

Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: media: Remove unnecessary goto.

Remove unnecessary goto.

Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: [media] mn88472: simplify NULL tests

Replace direct comparisons to NULL i.e. 'x == NULL' with '!x' for
consistency. Coccinelle semantic patch used:

@@
identifier func;
expression x;
statement Z;
@@

x = func(...);

if (
(
+ !
x
- == NULL
|
+ !
- NULL ==
x
)
   ) Z

Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: media: omap4iss: Remove unnecessary platform_set_drvdata()

Unnecessary platform_set_drvdata() has been removed since the driver
core clears the driver data to NULL after device release or on
probe failure. There is no need to manually clear the device
driver data to NULL.

The Coccinelle semantic patch used to make this change is as follows:
//<smpl>
@@
struct platform_device *pdev;
@@
- platform_set_drvdata(pdev, NULL);
//</smpl>

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8712: Remove function r8712_setptm_cmd and r8712_gettssi_cmd

The function r8712_setptm_cmd and r8712_gettssi_cmd are not used
anywhere in the kernel so remove them. Also, remove their function
prototypes.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: Remove unnecessary else after return

This patch fixes the checkpatch warning that else is not generally
useful after a break or return.

This was done using Coccinelle:
@@
expression e2;
statement s1;
@@
if(e2) { ... return ...; }
-else
         s1

Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8712: Avoid multiple assignments.

Avoid multiple assignments.This isssue is found by checkpatch.pl script.

Signed-off-by: Sandhya Bankar <bankarsandhya512@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: Remove the unnecessary parantheses

The unnecessary parantheses on the right side of assignments were removed,
as in most cases (expect for ==, >=, <=, !=), they are futile.

This was done using Coccinelle, the semantic patch being:

@@
expression E1,E2,E3;
binary operator bin_op = {==,>=,<=,!=};
@@

E1 =
(
  (
   E2 bin_op E3
  )
|
-(
E2
-)
)
;

Signed-off-by: G Pooja Shamili <poojashamili@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: rtl871x_mp_ioctl: Remove exceptional & on function name

In this file, function names are otherwise used as pointers without
&.

The Coccinelle semantic patch that is used to make this change is as
follows:

// <smpl>
@r@
identifier f;
@@
f(...) { ... }
@@
identifier r.f;
@@
- &f
+ f
@m@
type T;
identifier f;
@@
T f(...);
@@
identifier m.f;
@@
- &f
+ f
// </smpl>

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: staging: rtl8712: Change form of NULL comparisons

Change null comparisons of the form x == NULL to !x.
This was done using Coccinelle.

@@
expression e;
@@
- e == NULL
+ !e

Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: Make return of 0 explicit

Delete unnecessary local variable whose value is always 0 and
return 0 as the result.

The following Coccinelle script was used:

@@
identifier ret; expression E;
type T;
@@
(
- T ret;
|
- T ret = 0;
)

... when != \(ret=E
\|ret--\|ret++\|--ret\|++ret\|ret-=E\|ret+=E\|ret|=E\|ret&=E\)
(
?-ret = 0;
)
... when != \(ret=E
\|ret--\|ret++\|--ret\|++ret\|ret-=E\|ret+=E\|ret|=E\|ret&=E\)
(
return
- ret
+ 0
;
)

Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8712: Clean up tests if NULL returned on failure

Some functions like kmalloc/usb_alloc_urb/kmalloc_array returns NULL as
their return value on failure. !x is generally preferred over x==NULL
or NULL==x so make use of !x if the value returned on failure
by these functions is NULL.
Done using coccinelle:

@@
expression e;
statement S;
@@
e = \(kmalloc\|devm_kzalloc\|kmalloc_array
     \|devm_ioremap\|usb_alloc_urb\|alloc_netdev\)(...);
- if(e==NULL)
+ if(!e)
  S

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: Remove unnecessary parantheses

Removed parantheses on the right hand side of assignments as they are
not needed.

This was done with Coccinelle:

@@ expression a, b; @@

a =
- (
b
- )
;

Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: Simplify return

Simplified the multiline check to a single return statement.

Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Acked-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: Remove exceptional & on function name

Remove exceptional '&' operator in front of a function name.

The Coccinelle semantic patch that is used to make this change is as
follows:

// <smpl>
@r@
identifier f;
@@
f(...) { ... }
@@
identifier r.f;
@@
- &f
+ f
@m@
type T;
identifier f;
@@
T f(...);
@@
identifier m.f;
@@
- &f
+ f
// </smpl>

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: Remove unnecessary cast on void pointer

The following Coccinelle script was used to detect this:
@r@
expression x;
void* e;
type T;
identifier f;
@@
(
  *((T *)e)
|
  ((T *)x)[...]
|
  ((T*)x)->f
|
- (T*)
  e
)

Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8712: Remove cast on void pointer

The following Coccinelle script was used to detect this:
@r@
expression x;
void* e;
type T;
identifier f;
@@
(
  *((T *)e)
|
  ((T *)x)[...]
|
  ((T *)x)->f
|
- (T *)
  e
)

Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: ste_rmi4: simplify NULL tests

Replace direct comparisons to NULL i.e. 'x == NULL' with '!x' for
consistency. Coccinelle semantic patch used:

@@
identifier func;
expression x;
statement Z;
@@

x = func(...);

if (
(
+ !
x
- == NULL
|
+ !
- NULL ==
x
)
   ) Z

Signed-off-by: Eva Rachel Retuya <eraretuya@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: ste_rmi4: Add space around '/'

Add space around operator '/'. Problem found using checkpatch.pl
CHECK: spaces preferred around that '/' (ctx:VxV)

Signed-off-by: Dilek Uzulmez <dilekuzulmez@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon: Fix braces in condition statement

Braces should be used on all arms of the if statement. Checkpatch
detected this issue.

Signed-off-by: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon: Remove multiple blank lines

Avoid the use of multiple blank lines. Checkpatch detected these issues.

Signed-off-by: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon: Fix lines over 80 characters

The lines should be adjusted to 80 characters. Checkpatch detected these
issues.

Signed-off-by: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon: Remove blank lines after open brace

Blank lines are not necessary after an open brace. Checkpatch detected
these issues.

Signed-off-by: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon: Fix block comments

Remove commented source code. Checkpatch detected these issues.

Signed-off-by: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon: Remove comparison to NULL

Comparison to NULL should be avoided in conditions. Chackpatch detected
these issues.

Signed-off-by: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon: Insert blank line after struct declaration

Blank line is inserted after a struct declaration. Checkpatch detected
these issues.

Signed-off-by: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon: Move logical operators on the correct line

Logical continuations should be on the previous line. Checkpatch detected this issue.

Signed-off-by: Laura Garcia Liebana <nevola@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: octeon: Convert create_singlethread_workqueue()

With conccurency managed workqueues, use of dedicated workqueues can
be replaced by system_wq. Drop cvm_oct_poll_queue by using system_wq.

There are multiple work items per cvm_oct_poll_queue (viz.
cvm_oct_rx_refill_work, port_periodic_work) and different
cvm_oct_poll_queues need not be be ordered. Hence, concurrency
can be increased by switching to system_wq.

All work items are sync canceled in cvm_oct_remove() so it
is guaranteed that no work is in flight by the time exit path runs.

Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: slicoss: changes comparisons to NULL in slicoss.c

This is a patch to slicoss.c to change the style of NULL comparisons in
order to remove checkpatch.pl warnings.

Signed-off-by: Ben Marsh <bmarsh94@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: slicoss: removes unnecessary blank lines in slicoss.c

This is a patch to slicoss.c to remove unnecessary blank lines as found
by checkpatch.pl

Signed-off-by: Ben Marsh <bmarsh94@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: slicoss: change memory allocation style in slicoss.c

This is a patch to slicoss.c to change the memory allocation style in
slicoss.c as found by checkpatch.pl

Signed-off-by: Ben Marsh <bmarsh94@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: slicoss: changes the style of memory allocation in slicoss.c

This is a patch to slicoss.c to change the memory allocation style as
identified by checkpatch.pl

Signed-off-by: Ben Marsh <bmarsh94@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: slicoss: changes memory allocation style in slicoss.c

This is a patch to slicoss.c that changes the memory allocation style as
identified by checkpatch.pl

Signed-off-by: Ben Marsh <bmarsh94@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: slicoss: memory allocation style change in slicoss.c

This is a patch to slicoss.c to change the memory allocation style as
identified by checkpatch.pl

Signed-off-by: Ben Marsh <bmarsh94@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: slicoss: Eliminate commented out code

Remove commented out code to reduce code clutter.

Signed-off-by: Janani Ravichandran <janani.rvchndrn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: ieee80211_crypt: Remove unnecessary else after return

This patch fixes the checkpatch warning that else is not generally
useful after a break or return.

This was done using Coccinelle:
@@
expression e2;
statement s1;
@@
if(e2) { ... return ...; }
-else
         s1

Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192u: Replace random_ether_addr with eth_random_addr

The macro random_ether_addr is calling the function eth_random_addr.
Therefore, the call to random_ether_addr can be replaced with
eth_random_addr.
Remove the wrapper function ieee80211_randomize_cell and replace its
call with eth_random_addr as it is wrapping random_ether_addr.
Done using coccinelle:

@@
expression addr;
@@
- random_ether_addr(addr);
+ eth_random_addr(addr);

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192u: Replace memset with eth_broadcast_addr

Use eth_broadcast_addr to assign the broadcast address to the given
address array instead of memset when the second argument is a broacast
address 0xff. ETH_ALEN is a macro with value 6, so 6 is treated as
ETH_ALEN if it is the third argument of memset.

Done using coccinelle.
@@
expression e;
@@
- memset(e,\(0xff\|0xFF\|255\),\(ETH_ALEN\|6\));
+ eth_broadcast_addr(e);

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: ieee80211: Remove unused variables

The pointer *skb2 is declared 'globally' inside  ifdef NOT_YET.
It's used nowhere in the directory.
Another pointer *skb2 is declared 'locally', again inside another ifdef NOT_YET
in the function ieee80211_rx_frame_mgmt.
Hence, skb2 stays unused and has been removed.

This was done using Coccinelle:

@@ type T; identifier i; constant c; @@
-T i;
<... when != i
-i = c;
...>

Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192u: Remove debug messages

As kmalloc generates a backtrace on failure so there is no need of
these debug messages when kmalloc fails. Also remove unwanted {} around if
block after removal of these messages.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192u: Clean up tests if NULL returned on failure

Some functions return Null as their return value on failure. !x is
generally preferred over x==NULL or NULL==x. So make use of !x if
the value returned on failure is NULL.
Done using coccinelle:
@@
expression e;
statement S;
@@
e = \(kmalloc\|devm_kzalloc\|kmalloc_array
     \|devm_ioremap\|usb_alloc_urb\|alloc_netdev\)(...);
- if(e==NULL)
+ if(!e)
  S

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: ieee802111: Drop Useless Initialization

Removed initialisation of a varible if it is immediately reassigned.
Changes were made using Coccinelle.
@bad@
identifier i;
position p;
@@

i =@p <+...i...+>;

@@
type T;
constant C;
expression e;
identifier i;
position p != bad.p;
@@
T i
- = C
;
i =@p e;

Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192u: ieee80211: Use macro DIV_ROUND_UP

The macro DIV_ROUND_UP performs the computation
(((n) + (d) - 1) /(d)). It clarifies the divisor calculations.
This was done using the coccinelle script:
@@
expression e1;
expression e2;
@@
(
- ((e1) + e2 - 1) / (e2)
+ DIV_ROUND_UP(e1,e2)
|
- ((e1) + (e2 - 1)) / (e2)
+ DIV_ROUND_UP(e1,e2)
)

Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: goldfish: audio: fix compiliation on arm

We do actually need slab.h, by luck we get it on other platforms but not
always on ARM. Include it properly.

Signed-off-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Jin Qian <jinqian@android.com>
Signed-off-by: Alan <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: goldfish: audio: add devicetree bindings

Introduce devicetree bindings to the Goldfish staging audio driver.

Signed-off-by: Greg Hackmann <ghackmann@google.com>
Signed-off-by: Jin Qian <jinqian@android.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: rtllib_crypt_tkip: Remove unnecessary else after return

This patch fixes the checkpatch warning that else is not generally
useful after a break or return.

This was done using Coccinelle:
@@
expression e2;
statement s1;
@@
if(e2) { ... return ...; }
-else
         s1

Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8192e: Replace random_ether_addr with eth_random_addr

The macro random_ether_addr is calling the function eth_random_addr.
Therefore, the call to random_ether_addr can be replaced with
eth_random_addr.
Remove the wrapper function rtllib_randomize_cell and replace its
call with eth_random_addr as it is wrapping random_ether_addr.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Drop cast on void pointer

Void pointers need not be cast to other pointer types.
Semantic patch used:

@r@
expression x;
void *e;
type T;
identifier f;
@@

(
  *((T *)e)
|
  ((T *)x) [...]
|
  ((T *)x)->f
|
- (T *)
  e
)

Signed-off-by: Janani Ravichandran <janani.rvchndrn@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: rtl8192e: Remove create_workqueue()

With conccurency managed workqueues, use of dedicated workqueues can
be replaced by system_wq. Drop priv_wq by using system_wq.

Since there are multiple work items per priv but they do not need
to be ordered, increase of concurrency by switching to system_wq
should not break anything.

All work items are sync canceled on so it is guaranteed that
no work is running when rtl92e_suspend function is called.

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: staging: rtl8192e: rtllib_rx.c: Fix blank lines before a close brace

Fixed checkpatch.pl issue 'Blank lines aren't necessary before a close
brace'

Signed-off-by: Tapan Prakash T <tapanprakasht@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers: staging: rtl8192e: rtllib_rx.c: Fix code indent for conditional statement

Fixed checkpatch.pl warning 'suspect code indent for conditional
statements'

Signed-off-by: Tapan Prakash T <tapanprakasht@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Prefer using macro DIV_ROUND_UP

The macro DIV_ROUND_UP performs the computation
(((n) + (d) - 1) /(d)). It clarifies the divisor calculations.
This was done using the coccinelle script:
@@
expression e1;
expression e2;
@@
(
- ((e1) + e2 - 1) / (e2)
+ DIV_ROUND_UP(e1,e2)
|
- ((e1) + (e2 - 1)) / (e2)
+ DIV_ROUND_UP(e1,e2)
)

Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8192e: Remove create_workqueue()

With conccurency managed workqueues, use of dedicated workqueues can
be replaced by system_wq. Drop wq by using system_wq.

Since there are multiple work items per rtllib but they do not need to
be ordered, increase of concurrency by switching to system_wq should
not break anything.

All work items are sync canceled on rtllib_stop_protocol() so it is
guaranteed that no work is running when rtl92e_disable/reset/restart
functions are called.

Signed-off-by: Amitoj Kaur Chawla <amitoj1606@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: Possible unnecessary 'out of memory' message

Remove unnnecessary debug message.
Problem detected by checkpatch.

Signed-off-by: Anchal Jain <anchalj109@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: wilc1000: use mutex instead of semaphore sem_cfg_values

This patch replaces struct semaphore sem_cfg_values with struct mutex
cfg_values_lock. It is better to use mutex than semaphore.

Signed-off-by: Chaehyun Lim <chaehyun.lim@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: Use list_{next/prev}_entry instead of list_entry

This patch replace list_entry with list_{next/prev}_entry as it makes
the code more clear to read.
Done using coccinelle:

@@
expression e1;
identifier e3;
type t;
@@
(
- list_entry(e1->e3.next,t,e3)
+ list_next_entry(e1,e3)
|
- list_entry(e1->e3.prev,t,e3)
+ list_prev_entry(e1,e3)
)

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: lustre: lnet: Use list_first_entry_or_null

This patch replaces list_empty and list_entry with
list_first_entry_or_null.
Done using coccinelle:

@@
expression e1,e2;
statement S;
@@
- if(!list_empty(...)){
  e2=
- list_entry(e1.next,
+ list_first_entry_or_null(&e1,
  ...);
+ if(e2){
...
}

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

staging: rtl8723au: hal: Remove useless return variables

This patch removes unnecessary return variables and compresses the
return logic.
The coccinelle script that finds and fixes this issue is:
@@ type T; identifier i,f; constant C; @@
- T i;
...when != i
when strict
( return -C;
|
- i =
+ return
f(...);
- return i;
)

Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8723au: Remove debug messages

As kmalloc generates a backtrace on failure so there is no need of these
debug messages when kmalloc fails. Also remove unwanted {} around if block
after removal of these messages.

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Staging: rtl8723au: Clean up tests if NULL returned on failure

Some functions like kmalloc/usb_alloc_urb returns Null as their return
value on failure. !x is generally preferred over x==NULL or NULL==x. So
make use of !x if the value returned on failure by these functions is NULL.
Done using coccinelle:

@@
expression e;
statement S;
@@
e = \(kmalloc\|devm_kzalloc\|kmalloc_array
     \|devm_ioremap\|usb_alloc_urb\|alloc_netdev\)(...);
- if(e==NULL)
+ if(!e)
  S

Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>