Linus Torvalds [Mon, 28 Dec 2015 02:12:21 +0000 (18:12 -0800)]
Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS fixes from Ralf Baechle:
- Fix bitrot in __get_user_unaligned()
- EVA userspace accessor bug fixes.
- Fix for build issues with certain toolchains.
- Fix build error for VDSO with particular toolchain versions.
- Fix build error due to a variable that should have been removed by an
earlier patch
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: Fix bitrot in __get_user_unaligned()
MIPS: Fix build error due to unused variables.
MIPS: VDSO: Fix build error
MIPS: CPS: drop .set mips64r2 directives
MIPS: uaccess: Take EVA into account in [__]clear_user
MIPS: uaccess: Take EVA into account in __copy_from_user()
MIPS: uaccess: Fix strlen_user with EVA
Linus Torvalds [Mon, 28 Dec 2015 02:06:31 +0000 (18:06 -0800)]
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"A smallish set of fixes that we've been sitting on for a while now,
flushing the queue here so they go in. Summary:
A handful of fixes for OMAP, i.MX, Allwinner and Tegra:
- A clock rate and a PHY setup fix for i.MX6Q/DL
- A couple of fixes for the reduced serial bus (sunxi-rsb) on
Allwinner
- UART wakeirq fix for an OMAP4 board, timer config fixes for AM43XX.
- Suspend fix for Tegra124 Chromebooks
- Fix for missing implicit include that's different between
ARM/ARM64"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: tegra: Fix suspend hang on Tegra124 Chromebooks
bus: sunxi-rsb: Fix peripheral IC mapping runtime address
bus: sunxi-rsb: Fix primary PMIC mapping hardware address
ARM: dts: Fix UART wakeirq for omap4 duovero parlor
ARM: OMAP2+: AM43xx: select ARM TWD timer
ARM: OMAP2+: am43xx: enable GENERIC_CLOCKEVENTS_BROADCAST
fsl-ifc: add missing include on ARM64
ARM: dts: imx6: Fix Ethernet PHY mode on Ventana boards
ARM: dts: imx: Fix the assigned-clock mismatch issue on imx6q/dl
bus: sunxi-rsb: unlock on error in sunxi_rsb_read()
ARM: dts: sunxi: sun6i-a31s-primo81.dts: add touchscreen axis swapping property
Linus Torvalds [Sun, 27 Dec 2015 04:08:47 +0000 (20:08 -0800)]
Merge tag 'pm+acpi-4.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management and ACPI fixes from Rafael Wysocki:
"These fix an ACPI processor driver regression introduced during the
4.3 cycle and a mistake in the recently added SCPI support in the
arm_big_little cpufreq driver.
Specifics:
- Fix a thermal management issue introduced by an ACPI processor
driver change made during the 4.3 development cycle that failed to
return 0 from a function on success which triggered an error
cleanup path every time it had been called that deleted useful data
structures created previously (Srinivas Pandruvada).
- Fix a variable data type issue in the arm_big_little cpufreq
driver's SCPI support code added recently that prevents error
handling in there from working correctly (Dan Carpenter)"
* tag 'pm+acpi-4.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: scpi-cpufreq: signedness bug in scpi_get_dvfs_info()
ACPI / processor: Fix thermal cooling device regression
Linus Torvalds [Sun, 27 Dec 2015 03:55:16 +0000 (19:55 -0800)]
Merge tag 'upstream-4.4-rc7' of git://git.infradead.org/linux-ubifs
Pull UBI bug fixes from Richard Weinberger:
"This contains four bug fixes for UBI"
* tag 'upstream-4.4-rc7' of git://git.infradead.org/linux-ubifs:
mtd: ubi: don't leak e if schedule_erase() fails
mtd: ubi: fixup error correction in do_sync_erase()
UBI: fix use of "VID" vs. "EC" in header self-check
UBI: fix return error code
Linus Torvalds [Sun, 27 Dec 2015 03:48:09 +0000 (19:48 -0800)]
Merge tag 'trace-v4.4-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull ftrace/recordmcount fix from Steven Rostedt:
"Russell King was reporting lots of warnings when he compiled his
kernel with ftrace enabled. With some investigation it was discovered
that it was his compile setup. He was using ccache with hard links,
which allowed recordmcount to process the same .o twice. When this
happens, recordmcount will detect that it was already done and give a
warning about it.
Russell fixed this by having recordmcount detect that the object file
has more than one hard link, and if it does, it unlinks the object
file after it maps it and processes then. This appears to fix the
issue.
As you did not like the fact that recordmcount modified the file in
place and thought that it should do the modifications in memory and
then write it out to disk and move it over the old file to prevent
other more subtle issues like the one above, a second patch is added
on top of Russell's to do just that. Luckily the original code had
write and lseek wrappers that I was able to modify to not do inplace
writes, but simply keep track of the changes made in memory. When a
write is made, a "update" flag is set, and at the end of processing,
if the update is set, then it writes the file with changes out to a
new file, and then renames it over the original one.
The file descriptor is still passed to the write and lseek wrappers
because removing that would cause the change to be more intrusive.
That can be removed in a follow up cleanup patch that can wait till
the next merge window"
* tag 'trace-v4.4-rc4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ftrace/scripts: Have recordmcount copy the object file
scripts: recordmcount: break hardlinks
Linus Torvalds [Sat, 26 Dec 2015 22:58:06 +0000 (14:58 -0800)]
Merge tag 'arc-4.4-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc
Pull ARC fixes from Vineet Gupta:
"Sorry for this late pull request, but these are all important fixes
for code introduced/updated in this release which we will otherwise
end up back porting.
- Unwinder rework (A revert followed by better fix)
- Build errors: MMUv2, modules with -Os
- highmem section mismatch build splat"
* tag 'arc-4.4-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
ARC: dw2 unwind: Catch Dwarf SNAFUs early
ARC: dw2 unwind: Don't bail for CIE.version != 1
Revert "ARC: dw2 unwind: Ignore CIE version !=1 gracefully instead of bailing"
ARC: Fix linking errors with CONFIG_MODULE + CONFIG_CC_OPTIMIZE_FOR_SIZE
ARC: mm: fix building for MMU v2
ARC: mm: HIGHMEM: Fix section mismatch splat
Linus Torvalds [Fri, 25 Dec 2015 21:19:50 +0000 (13:19 -0800)]
Merge branch 'parisc-4.4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc system call restart fix from Helge Deller:
"The architectural design of parisc always uses two instructions to
call kernel syscalls (delayed branch feature). This means that the
instruction following the branch (located in the delay slot of the
branch instruction) is executed before control passes to the branch
destination.
Depending on which assembler instruction and how it is used in
usersapce in the delay slot, this sometimes made restarted syscalls
like futex() and poll() failing with -ENOSYS"
* 'parisc-4.4-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix syscall restarts
1) Finally make perf stack backtraces stable on sparc, several problems
(mostly due to the context in which the user copies from the stack
are done) contributed to this.
From Rob Gardner.
2) Export ADI capability if the cpu supports it.
3) Hook up userfaultfd system call.
4) When faults happen during user copies we really have to clean up and
restore the FPU state fully. Also from Rob Gardner
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
tty/serial: Skip 'NULL' char after console break when sysrq enabled
sparc64: fix FP corruption in user copy functions
sparc64: Perf should save/restore fault info
sparc64: Ensure perf can access user stacks
sparc64: Don't set %pil in rtrap_nmi too early
sparc64: Add ADI capability to cpu capabilities
tty: serial: constify sunhv_ops structs
sparc: Hook up userfaultfd system call
Vijay Kumar [Wed, 23 Dec 2015 18:55:33 +0000 (10:55 -0800)]
tty/serial: Skip 'NULL' char after console break when sysrq enabled
When sysrq is triggered from console, serial driver for SUN hypervisor
console receives a console break and enables the sysrq. It expects a valid
sysrq char following with break. Meanwhile if driver receives 'NULL'
ASCII char then it disables sysrq and sysrq handler will never be invoked.
This fix skips calling uart sysrq handler when 'NULL' is received while
sysrq is enabled.
Signed-off-by: Vijay Kumar <vijay.ac.kumar@oracle.com> Acked-by: Karl Volz <karl.volz@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Rob Gardner [Wed, 23 Dec 2015 06:24:49 +0000 (23:24 -0700)]
sparc64: fix FP corruption in user copy functions
Short story: Exception handlers used by some copy_to_user() and
copy_from_user() functions do not diligently clean up floating point
register usage, and this can result in a user process seeing invalid
values in floating point registers. This sometimes makes the process
fail.
Long story: Several cpu-specific (NG4, NG2, U1, U3) memcpy functions
use floating point registers and VIS alignaddr/faligndata to
accelerate data copying when source and dest addresses don't align
well. Linux uses a lazy scheme for saving floating point registers; It
is not done upon entering the kernel since it's a very expensive
operation. Rather, it is done only when needed. If the kernel ends up
not using FP regs during the course of some trap or system call, then
it can return to user space without saving or restoring them.
The various memcpy functions begin their FP code with VISEntry (or a
variation thereof), which saves the FP regs. They conclude their FP
code with VISExit (or a variation) which essentially marks the FP regs
"clean", ie, they contain no unsaved values. fprs.FPRS_FEF is turned
off so that a lazy restore will be triggered when/if the user process
accesses floating point regs again.
The bug is that the user copy variants of memcpy, copy_from_user() and
copy_to_user(), employ an exception handling mechanism to detect faults
when accessing user space addresses, and when this handler is invoked,
an immediate return from the function is forced, and VISExit is not
executed, thus leaving the fprs register in an indeterminate state,
but often with fprs.FPRS_FEF set and one or more dirty bits. This
results in a return to user space with invalid values in the FP regs,
and since fprs.FPRS_FEF is on, no lazy restore occurs.
This bug affects copy_to_user() and copy_from_user() for NG4, NG2,
U3, and U1. All are fixed by using a new exception handler for those
loads and stores that are done during the time between VISEnter and
VISExit.
n.b. In NG4memcpy, the problematic code can be triggered by a copy
size greater than 128 bytes and an unaligned source address. This bug
is known to be the cause of random user process memory corruptions
while perf is running with the callgraph option (ie, perf record -g).
This occurs because perf uses copy_from_user() to read user stacks,
and may fault when it follows a stack frame pointer off to an
invalid page. Validation checks on the stack address just obscure
the underlying problem.
Signed-off-by: Rob Gardner <rob.gardner@oracle.com> Signed-off-by: Dave Aldridge <david.j.aldridge@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Rob Gardner [Wed, 23 Dec 2015 04:16:07 +0000 (21:16 -0700)]
sparc64: Perf should save/restore fault info
There have been several reports of random processes being killed with
a bus error or segfault during userspace stack walking in perf. One
of the root causes of this problem is an asynchronous modification to
thread_info fault_address and fault_code, which stems from a perf
counter interrupt arriving during kernel processing of a "benign"
fault, such as a TSB miss. Since perf_callchain_user() invokes
copy_from_user() to read user stacks, a fault is not only possible,
but probable. Validity checks on the stack address merely cover up the
problem and reduce its frequency.
The solution here is to save and restore fault_address and fault_code
in perf_callchain_user() so that the benign fault handler is not
disturbed by a perf interrupt.
Signed-off-by: Rob Gardner <rob.gardner@oracle.com> Signed-off-by: Dave Aldridge <david.j.aldridge@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Rob Gardner [Wed, 23 Dec 2015 04:16:06 +0000 (21:16 -0700)]
sparc64: Ensure perf can access user stacks
When an interrupt (such as a perf counter interrupt) is delivered
while executing in user space, the trap entry code puts ASI_AIUS in
%asi so that copy_from_user() and copy_to_user() will access the
correct memory. But if a perf counter interrupt is delivered while the
cpu is already executing in kernel space, then the trap entry code
will put ASI_P in %asi, and this will prevent copy_from_user() from
reading any useful stack data in either of the perf_callchain_user_X
functions, and thus no user callgraph data will be collected for this
sample period. An additional problem is that a fault is guaranteed
to occur, and though it will be silently covered up, it wastes time
and could perturb state.
In perf_callchain_user(), we ensure that %asi contains ASI_AIUS
because we know for a fact that the subsequent calls to
copy_from_user() are intended to read the user's stack.
[ Use get_fs()/set_fs() -DaveM ]
Signed-off-by: Rob Gardner <rob.gardner@oracle.com> Signed-off-by: Dave Aldridge <david.j.aldridge@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Rob Gardner [Tue, 22 Dec 2015 04:48:03 +0000 (21:48 -0700)]
sparc64: Don't set %pil in rtrap_nmi too early
Commit 28a1f53 delays setting %pil to avoid potential
hardirq stack overflow in the common rtrap_irq path.
Setting %pil also needs to be delayed in the rtrap_nmi
path for the same reason.
Signed-off-by: Rob Gardner <rob.gardner@oracle.com> Signed-off-by: Dave Aldridge <david.j.aldridge@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Khalid Aziz [Thu, 17 Dec 2015 17:33:50 +0000 (10:33 -0700)]
sparc64: Add ADI capability to cpu capabilities
Add ADI (Application Data Integrity) capability to cpu capabilities list.
ADI capability allows virtual addresses to be encoded with a tag in
bits 63-60. This tag serves as an access control key for the regions
of virtual address with ADI enabled and a key set on them. Hypervisor
encodes this capability as "adp" in "hwcap-list" property in machine
description.
Signed-off-by: Khalid Aziz <khalid.aziz@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Aya Mahfouz [Mon, 14 Dec 2015 23:37:57 +0000 (01:37 +0200)]
tty: serial: constify sunhv_ops structs
Constifies sunhv_ops structures in tty's serial
driver since they are not modified after their
initialization.
Detected and found using Coccinelle.
Suggested-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Aya Mahfouz <mahfouz.saif.elyazal@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Wed, 23 Dec 2015 18:28:39 +0000 (10:28 -0800)]
Merge tag 'sound-4.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This shouldn't be a nightmare before Christmas: just a handful small
device-specific fixes for various ASoC and HD-audio drivers. Most of
them are stable fixes"
* tag 'sound-4.4-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek - Fix silent headphone output on MacPro 4,1 (v2)
ASoC: fsl_sai: fix no frame clk in master mode
ALSA: hda - Set SKL+ hda controller power at freeze() and thaw()
ASoC: sgtl5000: fix VAG power up timing
ASoC: rockchip: spdif: Set transmit data level to 16 samples
ASoC: wm8974: set cache type for regmap
ASoC: es8328: Fix shifts for mixer switches
ASoC: davinci-mcasp: Fix XDATA check in mcasp_start_tx
ASoC: es8328: Fix deemphasis values
Linus Torvalds [Wed, 23 Dec 2015 18:22:16 +0000 (10:22 -0800)]
Merge tag 'drm-intel-fixes-2015-12-23' of git://anongit.freedesktop.org/drm-intel
Pull i915 drm fixes from Jani Nikula:
"Here's a batch of i915 fixes all around. It may be slightly bigger
than one would hope for at this stage, but they've all been through
testing in our -next before being picked up for v4.4. Also, I missed
Dave's fixes pull earlier today just because I wanted an extra testing
round on this. So I'm fairly confident.
Wishing you all the things it is customary to wish this time of the
year"
* tag 'drm-intel-fixes-2015-12-23' of git://anongit.freedesktop.org/drm-intel:
drm/i915: Correct max delay for HDMI hotplug live status checking
drm/i915: mdelay(10) considered harmful
drm/i915: Kill intel_crtc->cursor_bo
drm/i915: Workaround CHV pipe C cursor fail
drm/i915: Only spin whilst waiting on the current request
drm/i915: Limit the busy wait on requests to 5us not 10ms!
drm/i915: Break busywaiting for requests on pending signals
drm/i915: Disable primary plane if we fail to reconstruct BIOS fb (v2)
drm/i915: Set the map-and-fenceable flag for preallocated objects
drm/i915: Drop the broken cursor base==0 special casing
Linus Torvalds [Wed, 23 Dec 2015 18:11:12 +0000 (10:11 -0800)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Not much happening, should have dequeued this lot earlier.
One amdgpu, one nouveau and one exynos fix"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/exynos: atomic check only enabled crtc states
drm/nouveau/bios/fan: hardcode the fan mode to linear
drm/amdgpu: fix user fence handling
Takashi Iwai [Wed, 23 Dec 2015 07:30:28 +0000 (08:30 +0100)]
Merge tag 'asoc-fix-v4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v4.4
A collection of small driver specific fixes here, nothing that'll affect
users who don't have the devices concerned. At least the wm8974 bug
indicates that there's not too many users of some of these devices.
Linus Torvalds [Wed, 23 Dec 2015 00:00:25 +0000 (16:00 -0800)]
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block layer fixes from Jens Axboe:
"Three small fixes for 4.4 final. Specifically:
- The segment issue fix from Junichi, where the old IO path does a
bio limit split before potentially bouncing the pages. We need to
do that in the right order, to ensure that limitations are met.
- A NVMe surprise removal IO hang fix from Keith.
- A use-after-free in null_blk, introduced by a previous patch in
this series. From Mike Krinkin"
* 'for-linus' of git://git.kernel.dk/linux-block:
null_blk: fix use-after-free error
block: ensure to split after potentially bouncing a bio
NVMe: IO ending fixes on surprise removal
Linus Torvalds [Tue, 22 Dec 2015 23:47:39 +0000 (15:47 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
- A series of fixes to the MTRR emulation, tested in the BZ by several
users so they should be safe this late
- A fix for a division by zero
- Two very simple ARM and PPC fixes
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Reload pit counters for all channels when restoring state
KVM: MTRR: treat memory as writeback if MTRR is disabled in guest CPUID
KVM: MTRR: observe maxphyaddr from guest CPUID, not host
KVM: MTRR: fix fixed MTRR segment look up
KVM: VMX: Fix host initiated access to guest MSR_TSC_AUX
KVM: arm/arm64: vgic: Fix kvm_vgic_map_is_active's dist check
kvm: x86: move tracepoints outside extended quiescent state
KVM: PPC: Book3S HV: Prohibit setting illegal transaction state in MSR
Linus Torvalds [Tue, 22 Dec 2015 23:43:18 +0000 (15:43 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Martin Schwidefsky:
"Two late bug fixes for kernel 4.4.
Merry Christmas"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/dis: Fix handling of format specifiers
s390/zcrypt: Fix AP queue handling if queue is full
Jon Hunter [Tue, 8 Dec 2015 10:26:49 +0000 (10:26 +0000)]
ARM: tegra: Fix suspend hang on Tegra124 Chromebooks
Enabling CPUFreq support for Tegra124 Chromebooks is causing the Tegra124
to hang when resuming from suspend.
When CPUFreq is enabled, the CPU clock is changed from the PLLX clock to
the DFLL clock during kernel boot. When resuming from suspend the CPU
clock is temporarily changed back to the PLLX clock before switching back
to the DFLL. If the DFLL is operating at a much lower frequency than the
PLLX when we enter suspend, and so the CPU voltage rail is at a voltage
too low for the CPUs to operate at the PLLX frequency, then the device
will hang.
Please note that the PLLX is used in the resume sequence to switch the CPU
clock from the very slow 32K clock to a faster clock during early resume
to speed up the resume sequence before the DFLL is resumed.
Ideally, we should fix this by setting the suspend frequency so that it
matches the PLLX frequency, however, that would be a bigger change. For
now simply disable CPUFreq support for Tegra124 Chromebooks to avoid the
hang when resuming from suspend.
Fixes: 9a0baee960a7 ("ARM: tegra: Enable CPUFreq support for Tegra124
Chromebooks")
Signed-off-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Tue, 22 Dec 2015 21:24:29 +0000 (13:24 -0800)]
Merge tag 'omap-for-v4.4/fixes-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Few fixes for omaps to allow am437x only builds to boot properly with
CPU_IDLE and ARM TWD timer. This is probably a common configuration setup
for people making products with these SoCs so let's make sure it works.
Also a wakeirq fix for duovero parlor making my life a bit easier as that
allows me to run basic PM regression tests on it.
It would be nice to have these in v4.4, but if it gets too late for that
because of the holidays, it is not super critical if these get merged for
v4.5.
* tag 'omap-for-v4.4/fixes-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: Fix UART wakeirq for omap4 duovero parlor
ARM: OMAP2+: AM43xx: select ARM TWD timer
ARM: OMAP2+: am43xx: enable GENERIC_CLOCKEVENTS_BROADCAST
Olof Johansson [Tue, 22 Dec 2015 19:49:21 +0000 (11:49 -0800)]
Merge tag 'imx-fixes-4.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes
The i.MX fixes for 4.4, 3rd round:
- Fix Ethernet PHY mode on i.MX6 Ventana boards, which can result in
a non-functional Ethernet when Marvell phy driver rather than generic
phy driver is selected.
- Fix an assigned-clock configuration bug on imx6qdl-sabreauto board
which was introduced by commit ed339363de1b ("ARM: dts:
imx6qdl-sabreauto: Allow HDMI and LVDS to work simultaneously").
* tag 'imx-fixes-4.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx6: Fix Ethernet PHY mode on Ventana boards
ARM: dts: imx: Fix the assigned-clock mismatch issue on imx6q/dl
Mike Krinkin [Tue, 15 Dec 2015 09:56:40 +0000 (12:56 +0300)]
null_blk: fix use-after-free error
blk_end_request_all may free request, so we need to save
request_queue pointer before blk_end_request_all call.
The problem was introduced in commit cf8ecc5a8455266f8d51
("null_blk: guarantee device restart in all irq modes")
and causes general protection fault with slab poisoning
enabled.
Fixes: cf8ecc5a8455266f8d51 ("null_blk: guarantee device
restart in all irq modes")
Signed-off-by: Mike Krinkin <krinkin.m.u@gmail.com> Reviewed-by: Ming Lei <tom.leiming@gmail.com> Signed-off-by: Jens Axboe <axboe@fb.com>
Junichi Nomura [Tue, 22 Dec 2015 17:23:44 +0000 (10:23 -0700)]
block: ensure to split after potentially bouncing a bio
blk_queue_bio() does split then bounce, which makes the segment
counting based on pages before bouncing and could go wrong. Move
the split to after bouncing, like we do for blk-mq, and the we
fix the issue of having the bio count for segments be wrong.
Fixes: 54efd50bfd87 ("block: make generic_make_request handle arbitrarily sized bios") Cc: stable@vger.kernel.org Tested-by: Artem S. Tashkinov <t.artem@lycos.com> Signed-off-by: Jens Axboe <axboe@fb.com>
Keith Busch [Fri, 11 Dec 2015 20:14:28 +0000 (13:14 -0700)]
NVMe: IO ending fixes on surprise removal
This patch fixes a lost request discovered during IO + hot removal.
The driver's pci removal deletes gendisks prior to shutting down the
controller to allow dirty data to sync. Dirty data can not be synced on
a surprise removal, though, and would potentially block indefinitely.
The driver previously had marked the queue as dying in this scenario
to prevent new requests from attempting, however it will still block
for requests that already entered the queue. This patch fixes this by
quiescing IO first, then aborting the requeued requests before deleting
disks.
Andrew Honig [Wed, 18 Nov 2015 22:50:23 +0000 (14:50 -0800)]
KVM: x86: Reload pit counters for all channels when restoring state
Currently if userspace restores the pit counters with a count of 0
on channels 1 or 2 and the guest attempts to read the count on those
channels, then KVM will perform a mod of 0 and crash. This will ensure
that 0 values are converted to 65536 as per the spec.
This is CVE-2015-7513.
Signed-off-by: Andy Honig <ahonig@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Tue, 22 Dec 2015 14:20:00 +0000 (15:20 +0100)]
KVM: MTRR: treat memory as writeback if MTRR is disabled in guest CPUID
Virtual machines can be run with CPUID such that there are no MTRRs.
In that case, the firmware will never enable MTRRs and it is obviously
undesirable to run the guest entirely with UC memory. Check out guest
CPUID, and use WB memory if MTRR do not exist.
Cc: qemu-stable@nongnu.org
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=107561 Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Mon, 14 Dec 2015 15:57:31 +0000 (16:57 +0100)]
KVM: MTRR: observe maxphyaddr from guest CPUID, not host
Conversion of MTRRs to ranges used the maxphyaddr from the boot CPU.
This is wrong, because var_mtrr_range's mask variable then is discontiguous
(like FF00FFFF000, where the first run of 0s corresponds to the bits
between host and guest maxphyaddr). Instead always set up the masks
to be full 64-bit values---we know that the reserved bits at the top
are zero, and we can restore them when reading the MSR. This way
var_mtrr_range gets a mask that just works.
Fixes: a13842dc668b40daef4327294a6d3bdc8bd30276 Cc: qemu-stable@nongnu.org
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=107561 Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes the slow-down of VM running with pci-passthrough, since some MTRR
range changed from MTRR_TYPE_WRBACK to MTRR_TYPE_UNCACHABLE. Memory in the
0K-640K range was incorrectly treated as uncacheable.
Ralf Baechle [Fri, 27 Nov 2015 18:17:01 +0000 (19:17 +0100)]
MIPS: Fix build error due to unused variables.
c861519fcf95b2d46cb4275903423b43ae150a40 ("MIPS: Fix delay loops which may
be removed by GCC.") which made it upstream was an outdated version of the
patch and is lacking some the removal of two variables that became unused
thus resulting in further warnings and build breakage. The commit
from ae878615d7cee5d7346946cf1ae1b60e427013c2 was correct however.
Qais Yousef [Tue, 8 Dec 2015 10:11:43 +0000 (10:11 +0000)]
MIPS: VDSO: Fix build error
Commit ebb5e78cc634 ("MIPS: Initial implementation of a VDSO") introduced a
build error.
For MIPS VDSO to be compiled it requires binutils version 2.25 or above but
the check in the Makefile had inverted logic causing it to be compiled in if
binutils is below 2.25.
Paul Burton [Wed, 5 Aug 2015 22:42:40 +0000 (15:42 -0700)]
MIPS: CPS: drop .set mips64r2 directives
Commit 977e043d5ea1 ("MIPS: kernel: cps-vec: Replace mips32r2 ISA level
with mips64r2") leads to .set mips64r2 directives being present in 32
bit (ie. CONFIG_32BIT=y) kernels. This is incorrect & leads to MIPS64
instructions being emitted by the assembler when expanding
pseudo-instructions. For example the "move" instruction can legitimately
be expanded to a "daddu". This causes problems when the kernel is run on
a MIPS32 CPU, as CONFIG_32BIT kernels of course often are...
Fix this by dropping the .set <ISA> directives entirely now that Kconfig
should be ensuring that kernels including this code are built with a
suitable -march= compiler flag.
Gary Wang [Tue, 15 Dec 2015 04:40:30 +0000 (12:40 +0800)]
drm/i915: Correct max delay for HDMI hotplug live status checking
The total delay of HDMI hotplug detecting with 30ms have already
been split into a resolution of 3 retries of 10ms each, for the worst
cases. But it still suffered from only waiting 10ms at most in
intel_hdmi_detect(). This patch corrects it by reading hotplug status
with 4 times at most for 30ms delay.
v2:
- straight up to loop execution for more clear in code readability
- mdelay will replace with msleep by Daniel's new patch
drm/i915: mdelay(10) considered harmful
- suggest to re-evaluate try times for being compatible to old HDMI monitor
Reviewed-by: Cooper Chiou <cooper.chiou@intel.com> Tested-by: Gary Wang <gary.c.wang@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Gavin Hindman <gavin.hindman@intel.com> Cc: Sonika Jindal <sonika.jindal@intel.com> Cc: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Gary Wang <gary.c.wang@intel.com>
[danvet: fixup conflict with s/mdelay/msleep/ patch.] Cc: drm-intel-fixes@lists.freedesktop.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit 61fb3980dd396880ffba48523b1e27579868b82b) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Ville Syrjälä [Mon, 14 Dec 2015 15:35:02 +0000 (17:35 +0200)]
drm/i915: Kill intel_crtc->cursor_bo
The vma may have been rebound between the last time the cursor was
enabled and now, so skipping the cursor gtt offset deduction is not
safe unless we would also reset cursor_bo to NULL when disabling the
cursor. Just thow cursor_bo to the bin instead since it's lost all
other uses thanks to universal plane support.
Chris pointed out that cursor updates are currently too slow
via universal planes that micro optimizations like these wouldn't
even help.
v2: Add a note about futility of micro optimizations (Chris)
Cc: drm-intel-fixes@lists.freedesktop.org
References: http://lists.freedesktop.org/archives/intel-gfx/2015-December/082976.html Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Takashi Iwai <tiwai@suse.de> Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1450107302-17171-1-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit 1264859d648c4bdc9f0a098efbff90cbf462a075) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
James Hogan [Wed, 5 Aug 2015 15:41:39 +0000 (16:41 +0100)]
MIPS: uaccess: Take EVA into account in [__]clear_user
__clear_user() (and clear_user() which uses it), always access the user
mode address space, which results in EVA store instructions when EVA is
enabled even if the current user address limit is KERNEL_DS.
Fix this by adding a new symbol __bzero_kernel for the normal kernel
address space bzero in EVA mode, and call that from __clear_user() if
eva_kernel_access().
Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com> Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/10844/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Ville Syrjälä [Fri, 18 Dec 2015 17:24:39 +0000 (19:24 +0200)]
drm/i915: Workaround CHV pipe C cursor fail
Turns out CHV pipe C was glued on somewhat poorly, and there's something
wrong with the cursor. If the cursor straddles the left screen edge,
and is then moved away from the edge or disabled, the pipe will often
underrun. If enough underruns are triggered quickly enough the pipe
will fall over and die (it just scans out a solid color and reports
a constant underrun). We need to turn the disp2d power well off and
on again to recover the pipe.
None of that is very nice for the user, so let's just refuse to place
the cursor in the compromised position. The ddx appears to fall back
to swcursor when the ioctl returns an error, so theoretically there's
no loss of functionality for the user (discounting swcursor bugs).
I suppose most cursors images actually have the hotspot not exactly
at 0,0 so under typical conditions the fallback will in fact kick in
as soon as the cursor touches the left edge of the screen.
Any atomic compositor should anyway be prepared to fall back to
GPU composition when things don't work out, so there should be no
problem with those.
Other things that I tried to solve this include flipping all
display related clock gating knobs I could find, increasing the
minimum gtt alignment all the way up to 512k. I also tried to see
if there are more specific screen coordinates that hit the bug, but
the findings were somewhat inconclusive. Sometimes the failures
happen almost across the whole left edge, sometimes more at the very
top and around the bottom half. I wasn't able to find any real pattern
to these variations, so it seems our only choice is to just refuse
to straddle the left screen edge at all.
Chris Wilson [Fri, 11 Dec 2015 11:32:59 +0000 (11:32 +0000)]
drm/i915: Only spin whilst waiting on the current request
Limit busywaiting only to the request currently being processed by the
GPU. If the request is not currently being processed by the GPU, there
is a very low likelihood of it being completed within the 2 microsecond
spin timeout and so we will just be wasting CPU cycles.
v2: Check for logical inversion when rebasing - we were incorrectly
checking for this request being active, and instead busywaiting for
when the GPU was not yet processing the request of interest.
v3: Try another colour for the seqno names.
v4: Another colour for the function names.
v5: Remove the forced coherency when checking for the active request. On
reflection and plenty of recent experimentation, the issue is not a
cache coherency problem - but an irq/seqno ordering problem (timing issue).
Here, we do not need the w/a to force ordering of the read with an
interrupt.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: "Rogozhkin, Dmitry V" <dmitry.v.rogozhkin@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Eero Tamminen <eero.t.tamminen@intel.com> Cc: "Rantala, Valtteri" <valtteri.rantala@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1449833608-22125-4-git-send-email-chris@chris-wilson.co.uk
(cherry picked from commit 821485dc2ad665f136c57ee589bf7a8210160fe2) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Chris Wilson [Fri, 11 Dec 2015 11:32:58 +0000 (11:32 +0000)]
drm/i915: Limit the busy wait on requests to 5us not 10ms!
When waiting for high frequency requests, the finite amount of time
required to set up the irq and wait upon it limits the response rate. By
busywaiting on the request completion for a short while we can service
the high frequency waits as quick as possible. However, if it is a slow
request, we want to sleep as quickly as possible. The tradeoff between
waiting and sleeping is roughly the time it takes to sleep on a request,
on the order of a microsecond. Based on measurements of synchronous
workloads from across big core and little atom, I have set the limit for
busywaiting as 10 microseconds. In most of the synchronous cases, we can
reduce the limit down to as little as 2 miscroseconds, but that leaves
quite a few test cases regressing by factors of 3 and more.
The code currently uses the jiffie clock, but that is far too coarse (on
the order of 10 milliseconds) and results in poor interactivity as the
CPU ends up being hogged by slow requests. To get microsecond resolution
we need to use a high resolution timer. The cheapest of which is polling
local_clock(), but that is only valid on the same CPU. If we switch CPUs
because the task was preempted, we can also use that as an indicator that
the system is too busy to waste cycles on spinning and we should sleep
instead.
__i915_spin_request was introduced in
commit 2def4ad99befa25775dd2f714fdd4d92faec6e34 [v4.2]
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Tue Apr 7 16:20:41 2015 +0100
drm/i915: Optimistically spin for the request completion
v2: Drop full u64 for unsigned long - the timer is 32bit wraparound safe,
so we can use native register sizes on smaller architectures. Mention
the approximate microseconds units for elapsed time and add some extra
comments describing the reason for busywaiting.
James Hogan [Wed, 5 Aug 2015 15:41:38 +0000 (16:41 +0100)]
MIPS: uaccess: Take EVA into account in __copy_from_user()
When EVA is in use, __copy_from_user() was unconditionally using the EVA
instructions to read the user address space, however this can also be
used for kernel access. If the address isn't a valid user address it
will cause an address error or TLB exception, and if it is then user
memory may be read instead of kernel memory.
For example in the following stack trace from Linux v3.10 (changes since
then will prevent this particular one still happening) kernel_sendmsg()
set the user address limit to KERNEL_DS, and tcp_sendmsg() goes on to
use __copy_from_user() with a kernel address in KSeg0.
Chris Wilson [Fri, 11 Dec 2015 11:32:57 +0000 (11:32 +0000)]
drm/i915: Break busywaiting for requests on pending signals
The busywait in __i915_spin_request() does not respect pending signals
and so may consume the entire timeslice for the task instead of
returning to userspace to handle the signal.
In the worst case this could cause a delay in signal processing of 20ms,
which would be a noticeable jitter in cursor tracking. If a higher
resolution signal was being used, for example to provide fairness of a
server timeslices between clients, we could expect to detect some
unfairness between clients (i.e. some windows not updating as fast as
others). This issue was noticed when inspecting a report of poor
interactivity resulting from excessively high __i915_spin_request usage.
Fixes regression from
commit 2def4ad99befa25775dd2f714fdd4d92faec6e34 [v4.2]
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date: Tue Apr 7 16:20:41 2015 +0100
drm/i915: Optimistically spin for the request completion
v2: Try to assess the impact of the bug
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Jens Axboe <axboe@kernel.dk>
Cc; "Rogozhkin, Dmitry V" <dmitry.v.rogozhkin@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Cc: Eero Tamminen <eero.t.tamminen@intel.com> Cc: "Rantala, Valtteri" <valtteri.rantala@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1449833608-22125-2-git-send-email-chris@chris-wilson.co.uk
(cherry picked from commit 91b0c352ace9afec1fb51590c7b8bd60e0eb9fbd) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
James Hogan [Wed, 5 Aug 2015 15:41:37 +0000 (16:41 +0100)]
MIPS: uaccess: Fix strlen_user with EVA
The strlen_user() function calls __strlen_kernel_asm in both branches of
the eva_kernel_access() conditional. For EVA it should be calling
__strlen_user_eva for user accesses, otherwise it will load from the
kernel address space instead of the user address space, and the access
checking will likely be ineffective at preventing it due to EVA's
overlapping user and kernel address spaces.
This was found after extending the test_user_copy module to cover user
string access functions, which gave the following error with EVA:
test_user_copy: illegal strlen_user passed
Fortunately the use of strlen_user() has been all but eradicated from
the mainline kernel, so only out of tree modules could be affected.
Fixes: e3a9b07a9caf ("MIPS: asm: uaccess: Add EVA support for str*_user operations") Signed-off-by: James Hogan <james.hogan@imgtec.com> Cc: Markos Chandras <markos.chandras@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 3.15.x-
Patchwork: https://patchwork.linux-mips.org/patch/10842/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Matt Roper [Thu, 3 Dec 2015 19:37:36 +0000 (11:37 -0800)]
drm/i915: Disable primary plane if we fail to reconstruct BIOS fb (v2)
If we fail to reconstruct the BIOS fb (e.g., because the FB is too
large), we'll be left with plane state that indicates the primary plane
is visible yet has a NULL fb. This mismatch causes problems later on
(e.g., for the watermark code). Since we've failed to reconstruct the
BIOS FB, the best solution is to just disable the primary plane and
pretend the BIOS never had it enabled.
Chris Wilson [Fri, 20 Nov 2015 14:16:39 +0000 (14:16 +0000)]
drm/i915: Set the map-and-fenceable flag for preallocated objects
As we mark the preallocated objects as bound, we should also flag them
correctly as being map-and-fenceable (if appropriate!) so that later
users do not get confused and try and rebind the pinned vma in order to
get a map-and-fenceable binding.
Ville Syrjälä [Mon, 14 Dec 2015 11:16:48 +0000 (13:16 +0200)]
drm/i915: Drop the broken cursor base==0 special casing
The cursor code tries to treat base==0 to mean disabled. That fails
when the cursor bo gets bound at ggtt offset 0, and the user is left
looking at an invisible cursor.
We lose the disabled->disabled optimization, but that seems like
something better handled at a slightly higher level.
Without this patch, internal speaker and line-out work,
but front headphone output jack stays silent on the
Mac Pro 4,1.
This code path also gets executed on the MacPro 5,1 due
to identical codec SSID, but i don't know if it has any
positive or adverse effects there or not.
(v2) Implement feedback from Takashi Iwai: Reuse
alc889_fixup_mbp_vref and just add a new nid
0x19 for the MacPro 4,1.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com> Cc: <stable@vger.kernel.org> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Helge Deller [Mon, 21 Dec 2015 09:03:30 +0000 (10:03 +0100)]
parisc: Fix syscall restarts
On parisc syscalls which are interrupted by signals sometimes failed to
restart and instead returned -ENOSYS which in the worst case lead to
userspace crashes.
A similiar problem existed on MIPS and was fixed by commit e967ef02
("MIPS: Fix restart of indirect syscalls").
On parisc the current syscall restart code assumes that all syscall
callers load the syscall number in the delay slot of the ble
instruction. That's how it is e.g. done in the unistd.h header file:
ble 0x100(%sr2, %r0)
ldi #syscall_nr, %r20
Because of that assumption the current code never restored %r20 before
returning to userspace.
This assumption is at least not true for code which uses the glibc
syscall() function, which instead uses this syntax:
ble 0x100(%sr2, %r0)
copy regX, %r20
where regX depend on how the compiler optimizes the code and register
usage.
This patch fixes this problem by adding code to analyze how the syscall
number is loaded in the delay branch and - if needed - copy the syscall
number to regX prior returning to userspace for the syscall restart.
Vineet Gupta [Mon, 21 Dec 2015 07:59:44 +0000 (13:29 +0530)]
Revert "ARC: dw2 unwind: Ignore CIE version !=1 gracefully instead of bailing"
Blingly ignoring CIE.version != 1 was a bad idea.
It still leaves "desirability" when running perf with callgraphing where libgcc
symbols might show in hotspot.
More importantly, basic CIE.version == 3 support already exists in code:
Vineet Gupta [Mon, 21 Dec 2015 07:08:01 +0000 (12:38 +0530)]
ARC: Fix linking errors with CONFIG_MODULE + CONFIG_CC_OPTIMIZE_FOR_SIZE
At -Os, ARC gcc generates millicode thunk for function prologue/epilogue,
which are served by libgcc.
Modules historically are NOT linked with libgcc to avoid code bloat, reducing
runtime relocation fixups etc. I even once tried doing that but got lost
in makefile intricacies.
This means modules at -Os don't get the millicode thunks, causing build
failures below:
Workaround that by inhibiting millicode thunks for loadable modules
Fixes STAR 9000641864:
("Linux built with optimizations for size emits errors for modules")
Reported-by: Anton Kolesov <akolesov@synosys.com> Cc: Michal Marek <mmarek@suse.cz> Cc: linux-kernel@vger.kernel.org Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Alexey Brodkin [Fri, 18 Dec 2015 19:28:51 +0000 (22:28 +0300)]
ARC: mm: fix building for MMU v2
ARC700 cores with MMU v2 don't have IC_PTAG AUX register and so we only
define ARC_REG_IC_PTAG for MMU versions >= 3.
But current implementation of cache_line_loop_vX() routines assumes
availability of all of them (v2, v3 and v4) simultaneously.
And given undefined ARC_REG_IC_PTAG if CONFIG_MMU_VER=2 we're seeing
compilation problem:
---------------------------------->8-------------------------------
CC arch/arc/mm/cache.o
arch/arc/mm/cache.c: In function '__cache_line_loop_v3':
arch/arc/mm/cache.c:270:13: error: 'ARC_REG_IC_PTAG' undeclared (first use in this function)
aux_tag = ARC_REG_IC_PTAG;
^
arch/arc/mm/cache.c:270:13: note: each undeclared identifier is reported only once for each function it appears in
scripts/Makefile.build:258: recipe for target 'arch/arc/mm/cache.o' failed
---------------------------------->8-------------------------------
The simples fix is to have ARC_REG_IC_PTAG defined regardless MMU
version being used.
We don't use it in cache_line_loop_v2() anyways so who cares.
Vineet Gupta [Sat, 19 Dec 2015 08:13:34 +0000 (13:43 +0530)]
ARC: mm: HIGHMEM: Fix section mismatch splat
| WARNING: vmlinux.o(.text+0xd6c2): Section mismatch in reference from the function alloc_kmap_pgtable() to the function
| .init.text:__alloc_bootmem_low()
The function alloc_kmap_pgtable() references the function __init __alloc_bootmem_low().
This is often because alloc_kmap_pgtable lacks a __init annotation or the annotation of __alloc_bootmem_low is wrong.
The processor cooling device is no longer present for passive thermal
control.
Commit 239708a3af44 ("ACPI: Split out ACPI PSS from ACPI Processor driver")
moved the processing to a new function acpi_pss_perf_init(), but
missed "return 0" after successful creation. This causes the error
handling functions to be called, which will delete the previously
created processor cooling device.
Fixes: 239708a3af44 (ACPI: Split out ACPI PSS from ACPI Processor driver) Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Cc: 4.3+ <stable@vger.kernel.org> # 4.3+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
NeilBrown [Mon, 21 Dec 2015 00:01:21 +0000 (11:01 +1100)]
md: remove check for MD_RECOVERY_NEEDED in action_store.
md currently doesn't allow a 'sync_action' such as 'reshape' to be set
while MD_RECOVERY_NEEDED is set.
This s a problem, particularly since commit 738a273806ee as that can
cause ->check_shape to call mddev_resume() which sets
MD_RECOVERY_NEEDED. So by the time we come to start 'reshape' it is
very likely that MD_RECOVERY_NEEDED is still set.
Testing for this flag is not really needed and is in any case very
racy as it can be set at any moment - asynchronously. Any race
between setting a sync_action and setting MD_RECOVERY_NEEDED must
already be handled properly in some locked code, probably
md_check_recovery(), so remove the test here.
The test on MD_RECOVERY_RUNNING is also racy in the 'reshape' case
so we should test it again after getting mddev_lock().
As this fixes a race and a regression which can cause 'reshape' to
fail, it is suitable for -stable kernels since 4.1
Reported-by: Xiao Ni <xni@redhat.com> Fixes: 738a273806ee ("md/raid5: fix allocation of 'scribble' array.") Cc: stable@vger.kernel.org (v4.1+) Signed-off-by: NeilBrown <neilb@suse.com>
Linus Torvalds [Sun, 20 Dec 2015 18:01:11 +0000 (10:01 -0800)]
Merge tag 'rtc-4.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC fixes from Alexandre Belloni:
"Late fixes for the RTC subsystem for 4.4:
A fix for a nasty hardware bug in rk808 and an initialization
reordering in da9063 to fix a possible crash"
* tag 'rtc-4.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: da9063: fix access ordering error during RTC interrupt at system power on
rtc: rk808: Compensate for Rockchip calendar deviation on November 31st
Steve Twiss [Tue, 8 Dec 2015 16:28:39 +0000 (16:28 +0000)]
rtc: da9063: fix access ordering error during RTC interrupt at system power on
This fix alters the ordering of the IRQ and device registrations in the RTC
driver probe function. This change will apply to the RTC driver that supports
both DA9063 and DA9062 PMICs.
A problem could occur with the existing RTC driver if:
A system is started from a cold boot using the PMIC RTC IRQ to initiate a
power on operation. For instance, if an RTC alarm is used to start a
platform from power off.
The existing driver IRQ is requested before the device has been properly
registered.
i.e.
ret = devm_request_threaded_irq()
comes before
rtc->rtc_dev = devm_rtc_device_register();
In this case, the interrupt can be called before the device has been
registered and the handler can be called immediately. The IRQ handler
da9063_alarm_event() contains the function call
which in turn tries to access the unavailable rtc->rtc_dev.
The fix is to reorder the functions inside the RTC probe. The IRQ is
requested after the RTC device resource has been registered so that
get_irq_byname is the last thing to happen.
Signed-off-by: Steve Twiss <stwiss.opensource@diasemi.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Julius Werner [Tue, 15 Dec 2015 23:02:49 +0000 (15:02 -0800)]
rtc: rk808: Compensate for Rockchip calendar deviation on November 31st
In A.D. 1582 Pope Gregory XIII found that the existing Julian calendar
insufficiently represented reality, and changed the rules about
calculating leap years to account for this. Similarly, in A.D. 2013
Rockchip hardware engineers found that the new Gregorian calendar still
contained flaws, and that the month of November should be counted up to
31 days instead. Unfortunately it takes a long time for calendar changes
to gain widespread adoption, and just like more than 300 years went by
before the last Protestant nation implemented Greg's proposal, we will
have to wait a while until all religions and operating system kernels
acknowledge the inherent advantages of the Rockchip system. Until then
we need to translate dates read from (and written to) Rockchip hardware
back to the Gregorian format.
This patch works by defining Jan 1st, 2016 as the arbitrary anchor date
on which Rockchip and Gregorian calendars are in sync. From that we can
translate arbitrary later dates back and forth by counting the number
of November/December transitons since the anchor date to determine the
offset between the calendars. We choose this method (rather than trying
to regularly "correct" the date stored in hardware) since it's the only
way to ensure perfect time-keeping even if the system may be shut down
for an unknown number of years. The drawback is that other software
reading the same hardware (e.g. mainboard firmware) must use the same
translation convention (including the same anchor date) to be able to
read and write correct timestamps from/to the RTC.
Signed-off-by: Julius Werner <jwerner@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Linus Torvalds [Sun, 20 Dec 2015 01:44:19 +0000 (17:44 -0800)]
Merge tag 'tty-4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are some tty/serial driver fixes for 4.4-rc6 that resolve some
reported problems. All of these have been in linux-next. The details
are in the shortlog"
* tag 'tty-4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: Fix GPF in flush_to_ldisc()
serial: earlycon: Add missing spinlock initialization
serial: sh-sci: Fix length of scatterlist
n_tty: Fix poll() after buffer-limited eof push read
serial: 8250_uniphier: fix dl_read and dl_write functions
Linus Torvalds [Sun, 20 Dec 2015 00:46:46 +0000 (16:46 -0800)]
Merge tag 'md/4.4-rc5-fixes' of git://neil.brown.name/md
Pull md fixes from Neil Brown:
"Four fixes for md:
- two recently introduced regressions fixed.
- one older bug in RAID10 - tagged for -stable since 4.2
- one minor sysfs api improvement"
* tag 'md/4.4-rc5-fixes' of git://neil.brown.name/md:
Fix remove_and_add_spares removes drive added as spare in slot_store
md: fix bug due to nested suspend
MD: change journal disk role to disk 0
md/raid10: fix data corruption and crash during resync
Linus Torvalds [Sun, 20 Dec 2015 00:40:48 +0000 (16:40 -0800)]
Merge tag 'powerpc-4.4-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Partial revert of "powerpc: Individual System V IPC system calls"
- pr_warn_once on unsupported OPAL_MSG type from Stewart
- Fix deadlock in opal-irqchip introduced by "Fix double endian
conversion" from Alistair
* tag 'powerpc-4.4-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/opal-irqchip: Fix deadlock introduced by "Fix double endian conversion"
powerpc/powernv: pr_warn_once on unsupported OPAL_MSG type
Partial revert of "powerpc: Individual System V IPC system calls"
Linus Torvalds [Sat, 19 Dec 2015 18:10:43 +0000 (10:10 -0800)]
Merge tag 'spi-fix-v4.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fixes from Mark Brown:
"A couple of reference counting bugs here, one in spidev and one with
holding an extra reference in the core that we never freed if we
removed a device, plus a driver specific fix. Both of the refcounting
bugs are very old but they've only been found by observation so
hopefully their impact has been low"
* tag 'spi-fix-v4.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: fix parent-device reference leak
spi: spidev: Hold spi_lock over all defererences of spi in release()
spi-fsl-dspi: Fix CTAR Register access
Linus Torvalds [Sat, 19 Dec 2015 18:05:00 +0000 (10:05 -0800)]
Merge tag 'gpio-v4.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
"Some GPIO fixes for the v4.4 series. Most prominent: I revert the
error propagation from the .get() function until we can fix up all the
drivers properly for v4.5.
- Revert the error number propagation from the .get() vtable entry
temporarily, until we make the proper fixes to all drivers.
- Fix the clamping behaviour in the generic GPIO driver.
- Driver fix for the ath79 driver"
* tag 'gpio-v4.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: revert get() to non-errorprogating behaviour
gpio: generic: clamp values from bgpio_get_set()
gpio: ath79: Fix the logic to clear offset bit of AR71XX_GPIO_REG_OE register
Linus Torvalds [Sat, 19 Dec 2015 18:01:03 +0000 (10:01 -0800)]
Merge tag 'pinctrl-v4.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Driver fixes for Freescale i.MX7D, Intel, Broadcom 2835
- One MAINTAINERS entry
* tag 'pinctrl-v4.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
MAINTAINERS: pinctrl: Add maintainers for pinctrl-single
pinctrl: bcm2835: Fix initial value for direction_output
pinctrl: intel: fix offset calculation issue of register PAD_OWN
pinctrl: intel: fix bug of register offset calculation
pinctrl: freescale: add ZERO_OFFSET_VALID flag for vf610 pinctrl
Linus Torvalds [Sat, 19 Dec 2015 17:52:44 +0000 (09:52 -0800)]
Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"A set of 'usual' driver bugfixes for the I2C subsystem"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: rcar: disable runtime PM correctly in slave mode
i2c: designware: Keep pm_runtime_enable/_disable calls in sync
i2c: designware: fix IO timeout issue for AMD controller
i2c: imx: init bus recovery info before adding i2c adapter
i2c: do not use 0x in front of %pa
i2c: davinci: Increase module clock frequency
i2c: mv64xxx: The n clockdiv factor is 0 based on sunxi SoCs
i2c: rk3x: populate correct variable for sda_falling_time
Wolfram Sang [Wed, 16 Dec 2015 19:05:18 +0000 (20:05 +0100)]
i2c: rcar: disable runtime PM correctly in slave mode
When we also are I2C slave, we need to disable runtime PM because the
address detection mechanism needs to be active all the time. However, we
can reenable runtime PM once the slave instance was unregistered. So,
use pm_runtime_get_sync/put to achieve this, since it has proper
refcounting. pm_runtime_allow/forbid is like a global knob controllable
from userspace which is unsuitable here.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Cc: stable@kernel.org
Linus Torvalds [Sat, 19 Dec 2015 05:01:35 +0000 (21:01 -0800)]
Merge tag 'pm+acpi-4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix a potential regression introduced during the 4.3 cycle
(generic power domains framework), a nasty bug that has been present
forever (power capping RAPL driver), a build issue (Tegra cpufreq
driver) and a minor ugliness introduced recently (intel_pstate).
Specifics:
- Fix a potential regression in the generic power domains framework
introduced during the 4.3 development cycle that may lead to
spurious failures of system suspend in certain situations (Ulf
Hansson).
- Fix a problem in the power capping RAPL (Running Average Power
Limits) driver that causes it to initialize successfully on some
systems where it is not supposed to do that which is due to an
incorrect check in an initialization routine (Prarit Bhargava).
- Fix a build problem in the cpufreq Tegra driver that depends on the
regulator framework, but that dependency is not reflected in
Kconfig (Arnd Bergmann).
- Fix a recent mistake in the intel_pstate driver where a numeric
constant is used directly instead of a symbol defined specifically
for the case in question (Prarit Bhargava)"
* tag 'pm+acpi-4.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
powercap / RAPL: fix BIOS lock check
cpufreq: intel_pstate: Minor cleanup for FRAC_BITS
cpufreq: tegra: add regulator dependency for T124
PM / Domains: Allow runtime PM callbacks to be re-used during system PM
Linus Torvalds [Sat, 19 Dec 2015 04:35:35 +0000 (20:35 -0800)]
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three fixes this time, two in SES picked up by KASAN for various types
of buffer overrun. The first is a USB array which returns page 8
whatever is asked for and causes us to overrun with incorrect data
format assumptions and the second is an invalid iteration of page 10
(the additional information page).
The final fix is a reversion of a NULL deref fix which caused
suspend/resume not to be called in pairs leading to incorrect device
operation (Jens has queued a more proper fix for the problem in
block)"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
ses: fix additional element traversal bug
Revert "SCSI: Fix NULL pointer dereference in runtime PM"
ses: Fix problems with simple enclosures
James Chen [Fri, 18 Dec 2015 23:51:48 +0000 (15:51 -0800)]
Input: elants_i2c - fix wake-on-touch
When sending "SLEEP" command to the controller it ceases scanning
completely and is unable to wake the system up from sleep, so if it is
configured as a wakeup source we should simply configure interrupt for
wakeup and rely on idle logic within the controller to reduce power
consumption while it is not used.
Signed-off-by: James Chen <james.chen@emc.com.tw> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Linus Torvalds [Fri, 18 Dec 2015 23:35:08 +0000 (15:35 -0800)]
Merge branch 'for-linus-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs
Pull btrfs fixes from Chris Mason:
"A couple of small fixes"
* 'for-linus-4.4' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
Btrfs: check prepare_uptodate_page() error code earlier
Btrfs: check for empty bitmap list in setup_cluster_bitmaps
btrfs: fix misleading warning when space cache failed to load
Btrfs: fix transaction handle leak in balance
Btrfs: fix unprotected list move from unused_bgs to deleted_bgs list
Linus Torvalds [Fri, 18 Dec 2015 22:25:57 +0000 (14:25 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"Three patches"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
include/linux/mmdebug.h: should include linux/bug.h
mm/zswap: change incorrect strncmp use to strcmp
proc: fix -ESRCH error when writing to /proc/$pid/coredump_filter
James Morse [Fri, 18 Dec 2015 22:22:07 +0000 (14:22 -0800)]
include/linux/mmdebug.h: should include linux/bug.h
mmdebug.h uses BUILD_BUG_ON_INVALID(), assuming someone else included
linux/bug.h. Include it ourselves.
This saves build-failures such as:
arch/arm64/include/asm/pgtable.h: In function 'set_pte_at':
arch/arm64/include/asm/pgtable.h:281:3: error: implicit declaration of function 'BUILD_BUG_ON_INVALID' [-Werror=implicit-function-declaration]
VM_WARN_ONCE(!pte_young(pte),
Fixes: 02602a18c32d7 ("bug: completely remove code generated by disabled VM_BUG_ON()") Signed-off-by: James Morse <james.morse@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
projects / karo-tx-linux.git / log