misc: Make AB8500_PWM driver depend on U8500 due to PWM breakage

Since we don't have a PWM API every PWM driver ends up exporting its
own version and we need to limit the platforms we try to build them on
in order to avoid multiple definitions. As the AB8500 is normally a
companion chip for the U8500 CPU depend on that architecture.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

mfd: Add __devexit annotation for vx855_remove

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Harald Welte <HaraldWelte@viatech.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

mfd: twl6030 irq_data conversion.

Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

gpio: Fix cs5535 printk warnings

drivers/gpio/cs5535-gpio.c: In function 'cs5535_gpio_probe':
drivers/gpio/cs5535-gpio.c:269: warning: format '%x' expects type 'unsigned int', but argument 3 has type 'resource_size_t'
drivers/gpio/cs5535-gpio.c:269: warning: format '%x' expects type 'unsigned int', but argument 4 has type 'resource_size_t'

Use vsprintf extension %pR to format resource.

Original-patch-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

misc: Fix cs5535 printk warnings

drivers/misc/cs5535-mfgpt.c: In function 'cs5535_mfgpt_probe':
drivers/misc/cs5535-mfgpt.c:320: warning: format '%x' expects type 'unsigned int', but argument 3 has type 'resource_size_t'
drivers/misc/cs5535-mfgpt.c:320: warning: format '%x' expects type 'unsigned int', but argument 4 has type 'resource_size_t'

Use vsprintf extension %pR to format resource.

Original-patch-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

mfd: Convert Wolfson MFD drivers to use irq_data accessor function

Actually makes the code larger rathe rthan smaller but does provide some
isolation against core API changes.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

mfd: Convert TWL4030 to new irq_ APIs

The genirq core is being updated to pass struct irq_data to irq_chip
operations. Update the TWL4030 driver to the new APIs.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

mfd: Convert tps6586x driver to new irq_ API

The genirq core is being updated to supply struct irq_data to irq_chip
operations rather than an irq number. Update the tps6586x driver to the
new APIs.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Mike Rapoport <mike@compulab.co.il>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

mfd: Convert tc6393xb driver to new irq_ APIs

The genirq core is being update to pass struct irq_data to irq_chip rather
than an irq number to operations. Update tc6393 to the new API.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Ian Molton <ian@mnementh.co.uk>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

mfd: Convert t7166xb driver to new irq_ API

The genirq core is being updated to pass struct irq_data rather than an
irq number to irq_chip operations. Update the t7166xb driver to the new
APIs.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Ian Molton <ian@mnementh.co.uk>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

mfd: Convert SMTPE driver to new irq_ APIs

The genirq core is being updated to supply struct irq_data to irq_chip
operations rather than an irq number. Update the SMTPE driver to the new
APIs.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

mfd: Convert MAX8998 driver to irq_ API

The genirq core is being updated to pass struct irq_data to interrupt
operations, update the MAX8998 driver to the new API.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

mfd: Convert max8925 to new irq_ API

The genirq infrastructure is being converted to pass struct irq_data rather
than an irq number to irq_chip operations, update max8925 to the new APIs.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

mfd: Convert jz4740-adc to new irq_ methods

Convert the jz4740-adc driver to use the recently introduced IRQ API
variants which are passed struct irq_data rather than an IRQ number.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

mfd: Convert HTC I2C CPLD driver to irq_ API

The genirq core is being converted to pass a struct irq_data to interrupt
operations rather than an IRQ number.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Cory Maccarrone <darkstar6262@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

mfd: Convert HTC EGPIO driver to irq_ API

The genirq core is being converted to pass a struct irq_data to interrupt
operations rather than an IRQ number.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

mfd: Convert ezx-pcap to new irq_ methods

Signed-off-by: Lennert Buytenhek <buytenh@secretlab.ca>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

mfd: Convert AB8500 to new irq_ methods

The genirq core is being converted to supply struct irq_data to chips
rather than the interrupt number.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Mattias Wallin <mattias.wallin@stericsson.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

mfd: Convert AB3500 to new irq_ APIs

The genirq core is being updated to pass struct irq_data rather than irq
numbers into chip drivers. As part of the update assignments to NULL for
unused operations are removed, these are not needed and the genirq docs
should be good enough.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Mattias Wallin <mattias.wallin@stericsson.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

mfd: Convert ASIC3 to new irq_ APIs

The interrupt controller APIs are being updated to pass a struct irq_data
rather than the interrupt number.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Ian Molton <ian@mnementh.co.uk>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

mfd: Convert 88PM860x driver to new irq_ APIs

The interrupt controller APIs are being updated to pass a struct irq_data
rather than the interrupt number.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

mfd: Staticise internal functions in HTC I2CCPLD driver

Most of these are GPIO operations, though a couple are just internal only
functions.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Cory Maccarrone <darkstar6262@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

mfd: Use NULL to initialise NULL pointers in ab8500-debugfs

Partly for coding style reasons, but mostly because sparse warns on it.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Mattias Wallin <mattias.wallin@stericsson.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

mfd: Correct ASIC3 IRQ_OWM resource setup

We should specify both a start and an end for the IRQ range rather than
initialise the start twice.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

mfd: Staticise unexported symbols in ASIC3

There's no use of either of these outside of the driver so they can be
declared static.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

mfd: Remove tps6586x device ID check

... and convert it to a dev_info print at probe time.

There are many variants of this chip with different values of VERSIONCRC.
The set of values is large, and not useful to enumerate. All are SW
compatible. The difference lies in default settings of the various power
rails, and other similar differences. The driver, or clients of the
driver, shouldn't be affected by this, since all rails should be
programmed into the desired state in all cases for correct operation.

Derived-from-code-by: Andrew Chew <achew@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

mfd: Fix twl_probe section mismatch warning in mfd/twl-core.c

Fix the following section mismatch warning when building
omap2plus_defconfig:

WARNING: vmlinux.o(.data+0x47d7c): Section mismatch in reference
from the variable twl_driver to the function .init.text:twl_probe()

Signed-off-by: Bryan Wu <bryan.wu@canonical.com>
Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

mfd: ab8500-core ioresources irq for subdrivers added

This patch adds the ioresources used by subdrivers to
retrieve their interrupt.

Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

mfd: ab8500-core wake up from suspend

This patch makes the system wake up from suspend when an
ab8500 interrupt occur. This can for example be USB cable
insert or an RTC alarm.

Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

mfd: Export ab8500 chip id to sysfs

This patch adds a file into sysfs for reading out chip id.
It has been requested for modem silent reboot.

Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com>
Signed-off-by: Ludovic Barre <ludovic.barre@stericsson.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

mfd: ab8500-core improved error handling in get_chip_id

We check for dev before dereferencing it.

Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

gpio/misc: Add MODULE_ALIAS entries for CS5535 functions

This adds MODULE_ALIAS entries to the various cs5535 subdevice modules; this
allows the modules to automatically be loaded when cs5535-mfd loads.

Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

misc: Convert cs5535-mfgpt from pci device to platform device

The cs5535-mfd driver now takes care of the PCI BAR handling; this
simplifies the mfgpt driver a bunch.

Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

gpio: Convert cs5535 from pci device to platform device

The cs5535-mfd driver now takes care of the PCI BAR handling; this
simplifies the gpio driver a lot.

Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

mfd: Fix cs5535 warning on x86-64

ARRAY_SIZE() returns size_t; use %zu instead of %d so that we don't
get warnings on x86-64.

Signed-off-by: Andres Salomon <dilinger@queued.net>
Acked-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

mfd: Implement runtime PM for WM8994 core driver

Allow the WM8994 to completely power off, including disabling the LDOs
if they are software controlled, when it goes idle. The CODEC subdevice
controls activity for the MFD as a whole.

If the GPIOs need to be used while the device is active runtime PM
should be disabled for the device by machine specific code.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

mfd: Provide pm_runtime_no_callbacks flag in cell data

Allow MFD cells to have pm_runtime_no_callbacks() called on them during
registration. This causes the runtime PM framework to ignore them,
allowing use of runtime PM to suspend the device as a whole even if
not all drivers for the MFD can usefully implement runtime PM. For
example, RTCs are likely to run continuously regardless of the power
state of the system.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

mfd: Fix ab8500-debug indentation errors

Replace spaces with proper tabs.

Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

mfd: Convert WM8994 to new irq_ interrupt methods

Kernel 2.6.37 adds new interrupt methods which take a struct irq_data
rather than an irq number. Convert over to these as they will become
mandatory in future.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

mfd: Convert WM835x to new irq_ interrupt methods

Kernel 2.6.37 adds new interrupt methods which take a struct irq_data
rather than an irq number. Convert over to these as they will become
mandatory in future.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

mfd: Convert WM831x to new irq_ interrupt methods

Kernel 2.6.37 adds new interrupt methods which take a struct irq_data
rather than an irq number. Convert over to these as they will become
mandatory in future.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

mfd: Add WM8326 support

The WM8326 is a high performance variant of the WM832x series with
no software visible differences.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

mfd: Simplify WM832x subdevice instantiation

All the current WM832x devices have the same set of subdevices so can
just use multiple case statements with a single body.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

mfd: Use printf extension %pR for struct resource

Using %pR standardizes the struct resource output.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

mfd: Add cs5535-mfd driver for AMD Geode's CS5535/CS5536 support

Add an MFD driver to handle the ISA device on CS5535 and CS5536
southbridges. This ISA bridge is actually multiple devices: GPIOs,
MFGPTs, etc.

Signed-off-by: Andres Salomon <dilinger@queued.net>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

mfd: Don't open-code mc13xxx_unlock

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

mfd: Include <linux/gpio.h> instead of <asm/gpio.h>

As warned by checkpatch.pl, use #include <linux/gpio.h> instead
of <asm/gpio.h>.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

mfd: Include <linux/io.h> instead of <asm/io.h>

As warned by checkpatch.pl, use #include <linux/io.h> instead of <asm/io.h>

Signed-off-by: Axel Lin <axel.lin@gmail.com>
Acked-by: Ben Dooks <ben@simtec.co.uk>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

mfd: Update WARN uses

Remove KERN_<level>.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>

Merge branch 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (59 commits)
  ACPI / PM: Fix build problems for !CONFIG_ACPI related to NVS rework
  ACPI: fix resource check message
  ACPI / Battery: Update information on info notification and resume
  ACPI: Drop device flag wake_capable
  ACPI: Always check if _PRW is present before trying to evaluate it
  ACPI / PM: Check status of power resources under mutexes
  ACPI / PM: Rename acpi_power_off_device()
  ACPI / PM: Drop acpi_power_nocheck
  ACPI / PM: Drop acpi_bus_get_power()
  Platform / x86: Make fujitsu_laptop use acpi_bus_update_power()
  ACPI / Fan: Rework the handling of power resources
  ACPI / PM: Register power resource devices as soon as they are needed
  ACPI / PM: Register acpi_power_driver early
  ACPI / PM: Add function for updating device power state consistently
  ACPI / PM: Add function for device power state initialization
  ACPI / PM: Introduce __acpi_bus_get_power()
  ACPI / PM: Introduce function for refcounting device power resources
  ACPI / PM: Add functions for manipulating lists of power resources
  ACPI / PM: Prevent acpi_power_get_inferred_state() from making changes
  ACPICA: Update version to 20101209
  ...

Merge branch 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6

* 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6:
  cpuidle/x86/perf: fix power:cpu_idle double end events and throw cpu_idle events from the cpuidle layer
  intel_idle: open broadcast clock event
  cpuidle: CPUIDLE_FLAG_CHECK_BM is omap3_idle specific
  cpuidle: CPUIDLE_FLAG_TLB_FLUSHED is specific to intel_idle
  cpuidle: delete unused CPUIDLE_FLAG_SHALLOW, BALANCED, DEEP definitions
  SH, cpuidle: delete use of NOP CPUIDLE_FLAGS_SHALLOW
  cpuidle: delete NOP CPUIDLE_FLAG_POLL
  ACPI: processor_idle: delete use of NOP CPUIDLE_FLAGs
  cpuidle: Rename X86 specific idle poll state[0] from C0 to POLL
  ACPI, intel_idle: Cleanup idle= internal variables
  cpuidle: Make cpuidle_enable_device() call poll_idle_init()
  intel_idle: update Sandy Bridge core C-state residency targets

Merge branch 'sfi-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-sfi-2.6

* 'sfi-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-sfi-2.6:
  SFI: use ioremap_cache() instead of ioremap()

Merge branch 'vfs-scale-working' of git://git.kernel.org/pub/scm/linux/kernel/git/npiggin/linux-npiggin

* 'vfs-scale-working' of git://git.kernel.org/pub/scm/linux/kernel/git/npiggin/linux-npiggin:
  fs: fix do_last error case when need_reval_dot
  nfs: add missing rcu-walk check
  fs: hlist UP debug fixup
  fs: fix dropping of rcu-walk from force_reval_path
  fs: force_reval_path drop rcu-walk before d_invalidate
  fs: small rcu-walk documentation fixes

Fixed up trivial conflicts in Documentation/filesystems/porting

fs: fix do_last error case when need_reval_dot

When open(2) without O_DIRECTORY opens an existing dir, it should return
EISDIR. In do_last(), the variable 'error' is initialized EISDIR, but it
is changed by d_revalidate() which returns any positive to represent
'the target dir is valid.'

Should we keep and return the initialized 'error' in this case.

Signed-off-by: Nick Piggin <npiggin@kernel.dk>

nfs: add missing rcu-walk check

Signed-off-by: Nick Piggin <npiggin@kernel.dk>

Merge branch 'stable/gntdev' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

* 'stable/gntdev' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen/p2m: Fix module linking error.
  xen p2m: clear the old pte when adding a page to m2p_override
  xen gntdev: use gnttab_map_refs and gnttab_unmap_refs
  xen: introduce gnttab_map_refs and gnttab_unmap_refs
  xen p2m: transparently change the p2m mappings in the m2p override
  xen/gntdev: Fix circular locking dependency
  xen/gntdev: stop using "token" argument
  xen: gntdev: move use of GNTMAP_contains_pte next to the map_op
  xen: add m2p override mechanism
  xen: move p2m handling to separate file
  xen/gntdev: add VM_PFNMAP to vma
  xen/gntdev: allow usermode to map granted pages
  xen: define gnttab_set_map_op/unmap_op

Fix up trivial conflict in drivers/xen/Kconfig

Merge branch 'stable/platform-pci-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

* 'stable/platform-pci-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xen-platform: Fix compile errors if CONFIG_PCI is not enabled.
  xen: rename platform-pci module to xen-platform-pci.
  xen-platform: use PCI interfaces to request IO and MEM resources.

fs: hlist UP debug fixup

Po-Yu Chuang <ratbert.chuang@gmail.com> noticed that hlist_bl_set_first could
crash on a UP system when LIST_BL_LOCKMASK is 0, because

LIST_BL_BUG_ON(!((unsigned long)h->first & LIST_BL_LOCKMASK));

always evaulates to true.

Fix the expression, and also avoid a dependency between bit spinlock
implementation and list bl code (list code shouldn't know anything
except that bit 0 is set when adding and removing elements). Eventually
if a good use case comes up, we might use this list to store 1 or more
arbitrary bits of data, so it really shouldn't be tied to locking either,
but for now they are helpful for debugging.

Signed-off-by: Nick Piggin <npiggin@kernel.dk>

fs: fix dropping of rcu-walk from force_reval_path

As J. R. Okajima noted, force_reval_path passes in the same dentry to
d_revalidate as the one in the nameidata structure (other callers pass in a
child), so the locking breaks. This can oops with a chrooted nfs mount, for
example. Similarly there can be other problems with revalidating a dentry
which is already in nameidata of the path walk.

Signed-off-by: Nick Piggin <npiggin@kernel.dk>

fs: force_reval_path drop rcu-walk before d_invalidate

d_revalidate can return in rcu-walk mode even when it returns 0.  We can't just
call any old dcache function on rcu-walk dentry (the dentry is unstable, so
even through d_lock can safely be taken, the result may no longer be what we
expect -- careful re-checks would be required). So just drop rcu in this case.

(I missed this conversion when switching to the rcu-walk convention that Linus
suggested)

Signed-off-by: Nick Piggin <npiggin@kernel.dk>

fs: small rcu-walk documentation fixes

Signed-off-by: Nick Piggin <npiggin@kernel.dk>

memcg: fix memory migration of shmem swapcache

In the current implementation mem_cgroup_end_migration() decides whether
the page migration has succeeded or not by checking "oldpage->mapping".

But if we are tring to migrate a shmem swapcache, the page->mapping of it
is NULL from the begining, so the check would be invalid.  As a result,
mem_cgroup_end_migration() assumes the migration has succeeded even if
it's not, so "newpage" would be freed while it's not uncharged.

This patch fixes it by passing mem_cgroup_end_migration() the result of
the page migration.

Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Reviewed-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: use [kv]zalloc[_node] rather than [kv]malloc+memset

In mem_cgroup_alloc() we currently do either kmalloc() or vmalloc() then
followed by memset() to zero the memory.  This can be more efficiently
achieved by using kzalloc() and vzalloc().  There's also one situation
where we can use kzalloc_node() - this is what's new in this version of
the patch.

Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Li Zefan <lizf@cn.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: fix deadlock between cpuset and memcg

Commit b1dd693e ("memcg: avoid deadlock between move charge and
try_charge()") can cause another deadlock about mmap_sem on task migration
if cpuset and memcg are mounted onto the same mount point.

After the commit, cgroup_attach_task() has sequence like:

cgroup_attach_task()
  ss->can_attach()
    cpuset_can_attach()
    mem_cgroup_can_attach()
      down_read(&mmap_sem)        (1)
  ss->attach()
    cpuset_attach()
      mpol_rebind_mm()
        down_write(&mmap_sem)     (2)
        up_write(&mmap_sem)
      cpuset_migrate_mm()
        do_migrate_pages()
          down_read(&mmap_sem)
          up_read(&mmap_sem)
    mem_cgroup_move_task()
      mem_cgroup_clear_mc()
        up_read(&mmap_sem)

We can cause deadlock at (2) because we've already aquire the mmap_sem at (1).

But the commit itself is necessary to fix deadlocks which have existed
before the commit like:

Ex.1)
                move charge             |        try charge
  --------------------------------------+------------------------------
    mem_cgroup_can_attach()             |  down_write(&mmap_sem)
      mc.moving_task = current          |    ..
      mem_cgroup_precharge_mc()         |  __mem_cgroup_try_charge()
        mem_cgroup_count_precharge()    |    prepare_to_wait()
          down_read(&mmap_sem)          |    if (mc.moving_task)
          -> cannot aquire the lock     |    -> true
                                        |      schedule()
                                        |      -> move charge should wake it up

Ex.2)
                move charge             |        try charge
  --------------------------------------+------------------------------
    mem_cgroup_can_attach()             |
      mc.moving_task = current          |
      mem_cgroup_precharge_mc()         |
        mem_cgroup_count_precharge()    |
          down_read(&mmap_sem)          |
          ..                            |
          up_read(&mmap_sem)            |
                                        |  down_write(&mmap_sem)
    mem_cgroup_move_task()              |    ..
      mem_cgroup_move_charge()          |  __mem_cgroup_try_charge()
        down_read(&mmap_sem)            |    prepare_to_wait()
        -> cannot aquire the lock       |    if (mc.moving_task)
                                        |    -> true
                                        |      schedule()
                                        |      -> move charge should wake it up

This patch fixes all of these problems by:
1. revert the commit.
2. To fix the Ex.1, we set mc.moving_task after mem_cgroup_count_precharge()
   has released the mmap_sem.
3. To fix the Ex.2, we use down_read_trylock() instead of down_read() in
   mem_cgroup_move_charge() and, if it has failed to aquire the lock, cancel
   all extra charges, wake up all waiters, and retry trylock.

Signed-off-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Reported-by: Ben Blum <bblum@andrew.cmu.edu>
Cc: Miao Xie <miaox@cn.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Paul Menage <menage@google.com>
Cc: Hiroyuki Kamezawa <kamezawa.hiroyuki@gmail.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: remove unnecessary return from void-returning mem_cgroup_del_lru_list()

Signed-off-by: Minchan Kim <minchan.kim@gmail.com>
Acked-by: Balbir Singh <balbir@linux.vnet.ibm.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: fix unit mismatch in memcg oom limit calculation

Adding the number of swap pages to the byte limit of a memory control
group makes no sense.  Convert the pages to bytes before adding them.

The only user of this code is the OOM killer, and the way it is used means
that the error results in a higher OOM badness value.  Since the cgroup
limit is the same for all tasks in the cgroup, the error should have no
practical impact at the moment.

But let's not wait for future or changing users to trip over it.

Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Cc: Greg Thelen <gthelen@google.com>
Cc: David Rientjes <rientjes@google.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Balbir Singh <balbir@in.ibm.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: add lock to synchronize page accounting and migration

Introduce a new bit spin lock, PCG_MOVE_LOCK, to synchronize the page
accounting and migration code.  This reworks the locking scheme of
_update_stat() and _move_account() by adding new lock bit PCG_MOVE_LOCK,
which is always taken under IRQ disable.

1. If pages are being migrated from a memcg, then updates to that
   memcg page statistics are protected by grabbing PCG_MOVE_LOCK using
   move_lock_page_cgroup().  In an upcoming commit, memcg dirty page
   accounting will be updating memcg page accounting (specifically: num
   writeback pages) from IRQ context (softirq).  Avoid a deadlocking
   nested spin lock attempt by disabling irq on the local processor when
   grabbing the PCG_MOVE_LOCK.

2. lock for update_page_stat is used only for avoiding race with
   move_account().  So, IRQ awareness of lock_page_cgroup() itself is not
   a problem.  The problem is between mem_cgroup_update_page_stat() and
   mem_cgroup_move_account_page().

Trade-off:
  * Changing lock_page_cgroup() to always disable IRQ (or
    local_bh) has some impacts on performance and I think
    it's bad to disable IRQ when it's not necessary.
  * adding a new lock makes move_account() slower.  Score is
    here.

Performance Impact: moving a 8G anon process.

Before:
real    0m0.792s
user    0m0.000s
sys     0m0.780s

After:
real    0m0.854s
user    0m0.000s
sys     0m0.842s

This score is bad but planned patches for optimization can reduce
this impact.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Greg Thelen <gthelen@google.com>
Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
Acked-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Andrea Righi <arighi@develer.com>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: create extensible page stat update routines

Replace usage of the mem_cgroup_update_file_mapped() memcg
statistic update routine with two new routines:
* mem_cgroup_inc_page_stat()
* mem_cgroup_dec_page_stat()

As before, only the file_mapped statistic is managed.  However, these more
general interfaces allow for new statistics to be more easily added.  New
statistics are added with memcg dirty page accounting.

Signed-off-by: Greg Thelen <gthelen@google.com>
Signed-off-by: Andrea Righi <arighi@develer.com>
Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Acked-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: document cgroup dirty memory interfaces

Document cgroup dirty memory interfaces and statistics.

[akpm@linux-foundation.org: fix use_hierarchy description]
Signed-off-by: Andrea Righi <arighi@develer.com>
Signed-off-by: Greg Thelen <gthelen@google.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

memcg: add page_cgroup flags for dirty page tracking

This patchset provides the ability for each cgroup to have independent
dirty page limits.

Limiting dirty memory is like fixing the max amount of dirty (hard to
reclaim) page cache used by a cgroup.  So, in case of multiple cgroup
writers, they will not be able to consume more than their designated share
of dirty pages and will be forced to perform write-out if they cross that
limit.

The patches are based on a series proposed by Andrea Righi in Mar 2010.

Overview:

- Add page_cgroup flags to record when pages are dirty, in writeback, or nfs
  unstable.

- Extend mem_cgroup to record the total number of pages in each of the
  interesting dirty states (dirty, writeback, unstable_nfs).

- Add dirty parameters similar to the system-wide  /proc/sys/vm/dirty_*
  limits to mem_cgroup.  The mem_cgroup dirty parameters are accessible
  via cgroupfs control files.

- Consider both system and per-memcg dirty limits in page writeback when
  deciding to queue background writeback or block for foreground writeback.

Known shortcomings:

- When a cgroup dirty limit is exceeded, then bdi writeback is employed to
  writeback dirty inodes.  Bdi writeback considers inodes from any cgroup, not
  just inodes contributing dirty pages to the cgroup exceeding its limit.

- When memory.use_hierarchy is set, then dirty limits are disabled.  This is a
  implementation detail.  An enhanced implementation is needed to check the
  chain of parents to ensure that no dirty limit is exceeded.

Performance data:
- A page fault microbenchmark workload was used to measure performance, which
  can be called in read or write mode:
        f = open(foo. $cpu)
        truncate(f, 4096)
        alarm(60)
        while (1) {
                p = mmap(f, 4096)
                if (write)
*p = 1
else
x = *p
                munmap(p)
        }

- The workload was called for several points in the patch series in different
  modes:
  - s_read is a single threaded reader
  - s_write is a single threaded writer
  - p_read is a 16 thread reader, each operating on a different file
  - p_write is a 16 thread writer, each operating on a different file

- Measurements were collected on a 16 core non-numa system using "perf stat
  --repeat 3".  The -a option was used for parallel (p_*) runs.

- All numbers are page fault rate (M/sec).  Higher is better.

- To compare the performance of a kernel without non-memcg compare the first and
  last rows, neither has memcg configured.  The first row does not include any
  of these memcg patches.

- To compare the performance of using memcg dirty limits, compare the baseline
  (2nd row titled "w/ memcg") with the the code and memcg enabled (2nd to last
  row titled "all patches").

                           root_cgroup                    child_cgroup
                 s_read s_write p_read p_write   s_read s_write p_read p_write
mmotm w/o memcg   0.428  0.390   0.429  0.388
mmotm w/ memcg    0.411  0.378   0.391  0.362     0.412  0.377   0.385  0.363
all patches       0.384  0.360   0.370  0.348     0.381  0.363   0.368  0.347
all patches       0.431  0.402   0.427  0.395
  w/o memcg

This patch:

Add additional flags to page_cgroup to track dirty pages within a
mem_cgroup.

Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrea Righi <arighi@develer.com>
Signed-off-by: Greg Thelen <gthelen@google.com>
Acked-by: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: batch activate_page() to reduce lock contention

The zone->lru_lock is heavily contented in workload where activate_page()
is frequently used.  We could do batch activate_page() to reduce the lock
contention.  The batched pages will be added into zone list when the pool
is full or page reclaim is trying to drain them.

For example, in a 4 socket 64 CPU system, create a sparse file and 64
processes, processes shared map to the file.  Each process read access the
whole file and then exit.  The process exit will do unmap_vmas() and cause
a lot of activate_page() call.  In such workload, we saw about 58% total
time reduction with below patch.  Other workloads with a lot of
activate_page also benefits a lot too.

I tested some microbenchmarks:
case-anon-cow-rand-mt 0.58%
case-anon-cow-rand -3.30%
case-anon-cow-seq-mt -0.51%
case-anon-cow-seq -5.68%
case-anon-r-rand-mt 0.23%
case-anon-r-rand 0.81%
case-anon-r-seq-mt -0.71%
case-anon-r-seq -1.99%
case-anon-rx-rand-mt 2.11%
case-anon-rx-seq-mt 3.46%
case-anon-w-rand-mt -0.03%
case-anon-w-rand -0.50%
case-anon-w-seq-mt -1.08%
case-anon-w-seq -0.12%
case-anon-wx-rand-mt -5.02%
case-anon-wx-seq-mt -1.43%
case-fork 1.65%
case-fork-sleep -0.07%
case-fork-withmem 1.39%
case-hugetlb -0.59%
case-lru-file-mmap-read-mt -0.54%
case-lru-file-mmap-read 0.61%
case-lru-file-mmap-read-rand -2.24%
case-lru-file-readonce -0.64%
case-lru-file-readtwice -11.69%
case-lru-memcg -1.35%
case-mmap-pread-rand-mt 1.88%
case-mmap-pread-rand -15.26%
case-mmap-pread-seq-mt 0.89%
case-mmap-pread-seq -69.72%
case-mmap-xread-rand-mt 0.71%
case-mmap-xread-seq-mt 0.38%

The most significent are:
case-lru-file-readtwice -11.69%
case-mmap-pread-rand -15.26%
case-mmap-pread-seq -69.72%

which use activate_page a lot.  others are basically variations because
each run has slightly difference.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: simplify code of swap.c

Clean up code and remove duplicate code.  Next patch will use
pagevec_lru_move_fn introduced here too.

Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Cc: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/page_alloc.c: don't cache `current' in a local

It's old-fashioned and unneeded.

akpm:/usr/src/25> size mm/page_alloc.o
   text    data     bss     dec     hex filename
  39884 1241317   18808 1300009  13d629 mm/page_alloc.o (before)
  39838 1241317   18808 1299963  13d5fb mm/page_alloc.o (after)

Acked-by: David Rientjes <rientjes@google.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: fix hugepage migration

2.6.37 added an unmap_and_move_huge_page() for memory failure recovery,
but its anon_vma handling was still based around the 2.6.35 conventions.
Update it to use page_lock_anon_vma, get_anon_vma, page_unlock_anon_vma,
drop_anon_vma in the same way as we're now changing unmap_and_move().

I don't particularly like to propose this for stable when I've not seen
its problems in practice nor tested the solution: but it's clearly out of
synch at present.

Signed-off-by: Hugh Dickins <hughd@google.com>
Cc: Mel Gorman <mel@csn.ul.ie>
Cc: Rik van Riel <riel@redhat.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: "Jun'ichi Nomura" <j-nomura@ce.jp.nec.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: <stable@kernel.org> [2.6.37, 2.6.36]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: fix migration hangs on anon_vma lock

Increased usage of page migration in mmotm reveals that the anon_vma
locking in unmap_and_move() has been deficient since 2.6.36 (or even
earlier).  Review at the time of f18194275c39835cb84563500995e0d503a32d9a
("mm: fix hang on anon_vma->root->lock") missed the issue here: the
anon_vma to which we get a reference may already have been freed back to
its slab (it is in use when we check page_mapped, but that can change),
and so its anon_vma->root may be switched at any moment by reuse in
anon_vma_prepare.

Perhaps we could fix that with a get_anon_vma_unless_zero(), but let's
not: just rely on page_lock_anon_vma() to do all the hard thinking for us,
then we don't need any rcu read locking over here.

In removing the rcu_unlock label: since PageAnon is a bit in
page->mapping, it's impossible for a !page->mapping page to be anon; but
insert VM_BUG_ON in case the implementation ever changes.

[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Mel Gorman <mel@csn.ul.ie>
Reviewed-by: Rik van Riel <riel@redhat.com>
Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com>
Cc: "Jun'ichi Nomura" <j-nomura@ce.jp.nec.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: <stable@kernel.org> [2.6.37, 2.6.36]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ksm: drain pagevecs to lru

It was hard to explain the page counts which were causing new LTP tests
of KSM to fail: we need to drain the per-cpu pagevecs to LRU occasionally.

Signed-off-by: Hugh Dickins <hughd@google.com>
Reported-by: CAI Qian <caiqian@redhat.com>
Cc:Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hugetlb: fix handling of parse errors in sysfs

When parsing changes to the huge page pool sizes made from userspace via
the sysfs interface, bogus input values are being covered up by
nr_hugepages_store_common and nr_overcommit_hugepages_store returning 0
when strict_strtoul returns an error.  This can cause an infinite loop in
the nr_hugepages_store code.  This patch changes the return value for
these functions to -EINVAL when strict_strtoul returns an error.

Signed-off-by: Eric B Munson <emunson@mgebm.net>
Reported-by: CAI Qian <caiqian@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Eric B Munson <emunson@mgebm.net>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hugetlb: do not allow pagesize >= MAX_ORDER pool adjustment

Huge pages with order >= MAX_ORDER must be allocated at boot via the
kernel command line, they cannot be allocated or freed once the kernel is
up and running.  Currently we allow values to be written to the sysfs and
sysctl files controling pool size for these huge page sizes.  This patch
makes the store functions for nr_hugepages and nr_overcommit_hugepages
return -EINVAL when the pool for a page size >= MAX_ORDER is changed.

[akpm@linux-foundation.org: avoid multiple return paths in nr_hugepages_store_common()]
[caiqian@redhat.com: add checking in hugetlb_overcommit_handler()]
Signed-off-by: Eric B Munson <emunson@mgebm.net>
Reported-by: CAI Qian <caiqian@redhat.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Michal Hocko <mhocko@suse.cz>
Cc: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hugetlb: check the return value of string conversion in sysctl handler

proc_doulongvec_minmax may fail if the given buffer doesn't represent a
valid number.  If we provide something invalid we will initialize the
resulting value (nr_overcommit_huge_pages in this case) to a random value
from the stack.

The issue was introduced by a3d0c6aa when the default handler has been
replaced by the helper function where we do not check the return value.

Reproducer:
echo "" > /proc/sys/vm/nr_overcommit_hugepages

[akpm@linux-foundation.org: correctly propagate proc_doulongvec_minmax return code]
Signed-off-by: Michal Hocko <mhocko@suse.cz>
Cc: CAI Qian <caiqian@redhat.com>
Cc: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fs/fs-writeback.c: fix sync_inodes_sb() return value kernel-doc

The sync_inodes_sb() function does not have a return value.  Remove the
outdated documentation comment.

Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/dmapool.c: use TASK_UNINTERRUPTIBLE in dma_pool_alloc()

As it stands this code will degenerate into a busy-wait if the calling task
has signal_pending().

Cc: Rolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/dmapool.c: take lock only once in dma_pool_free()

dma_pool_free() scans for the page to free in the pool list holding the
pool lock.  Then it releases the lock basically to acquire it immediately
again.  Modify the code to only take the lock once.

This will do some additional loops and computations with the lock held in
if memory debugging is activated.  If it is not activated the only new
operations with this lock is one if and one substraction.

Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/page_alloc.c: simplify calculation of combined index of adjacent buddy lists

The previous approach of calucation of combined index was

page_idx & ~(1 << order))

but we have same result with

page_idx & buddy_idx

This reduces instructions slightly as well as enhances readability.

[akpm@linux-foundation.org: coding-style fixes]
[akpm@linux-foundation.org: fix used-unintialised warning]
Signed-off-by: KyongHo Cho <pullip.cho@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

brk: fix min_brk lower bound computation for COMPAT_BRK

Even if CONFIG_COMPAT_BRK is set in the kernel configuration, it can still
be overriden by randomize_va_space sysctl.

If this is the case, the min_brk computation in sys_brk() implementation
is wrong, as it solely takes into account COMPAT_BRK setting, assuming
that brk start is not randomized.  But that might not be the case if
randomize_va_space sysctl has been set to '2' at the time the binary has
been loaded from disk.

In such case, the check has to be done in a same way as in
!CONFIG_COMPAT_BRK case.

In addition to that, the check for the COMPAT_BRK case introduced back in
a5b4592c ("brk: make sys_brk() honor COMPAT_BRK when computing lower
bound") is slightly wrong -- the lower bound shouldn't be mm->end_code,
but mm->end_data instead, as that's where the legacy applications expect
brk section to start (i.e.  immediately after last global variable).

[akpm@linux-foundation.org: fix comment]
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/hugetlb.c: fix error-path memory leak in nr_hugepages_store_common()

The NODEMASK_ALLOC macro may dynamically allocate memory for its second
argument ('nodes_allowed' in this context).

In nr_hugepages_store_common() we may abort early if strict_strtoul()
fails, but in that case we do not free the memory already allocated to
'nodes_allowed', causing a memory leak.

This patch closes the leak by freeing the memory in the error path.

[akpm@linux-foundation.org: use NODEMASK_FREE, per Minchan Kim]
Signed-off-by: Jesper Juhl <jj@chaosbits.net>
Cc: Minchan Kim <minchan.kim@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: migration: use rcu_dereference_protected when dereferencing the radix tree slot during file page migration

migrate_pages() -> unmap_and_move() only calls rcu_read_lock() for
anonymous pages, as introduced by git commit
989f89c57e6361e7d16fbd9572b5da7d313b073d ("fix rcu_read_lock() in page
migraton").  The point of the RCU protection there is part of getting a
stable reference to anon_vma and is only held for anon pages as file pages
are locked which is sufficient protection against freeing.

However, while a file page's mapping is being migrated, the radix tree is
double checked to ensure it is the expected page.  This uses
radix_tree_deref_slot() -> rcu_dereference() without the RCU lock held
triggering the following warning.

[  173.674290] ===================================================
[  173.676016] [ INFO: suspicious rcu_dereference_check() usage. ]
[  173.676016] ---------------------------------------------------
[  173.676016] include/linux/radix-tree.h:145 invoked rcu_dereference_check() without protection!
[  173.676016]
[  173.676016] other info that might help us debug this:
[  173.676016]
[  173.676016]
[  173.676016] rcu_scheduler_active = 1, debug_locks = 0
[  173.676016] 1 lock held by hugeadm/2899:
[  173.676016]  #0:  (&(&inode->i_data.tree_lock)->rlock){..-.-.}, at: [<c10e3d2b>] migrate_page_move_mapping+0x40/0x1ab
[  173.676016]
[  173.676016] stack backtrace:
[  173.676016] Pid: 2899, comm: hugeadm Not tainted 2.6.37-rc5-autobuild
[  173.676016] Call Trace:
[  173.676016]  [<c128cc01>] ? printk+0x14/0x1b
[  173.676016]  [<c1063502>] lockdep_rcu_dereference+0x7d/0x86
[  173.676016]  [<c10e3db5>] migrate_page_move_mapping+0xca/0x1ab
[  173.676016]  [<c10e41ad>] migrate_page+0x23/0x39
[  173.676016]  [<c10e491b>] buffer_migrate_page+0x22/0x107
[  173.676016]  [<c10e48f9>] ? buffer_migrate_page+0x0/0x107
[  173.676016]  [<c10e425d>] move_to_new_page+0x9a/0x1ae
[  173.676016]  [<c10e47e6>] migrate_pages+0x1e7/0x2fa

This patch introduces radix_tree_deref_slot_protected() which calls
rcu_dereference_protected().  Users of it must pass in the
mapping->tree_lock that is protecting this dereference.  Holding the tree
lock protects against parallel updaters of the radix tree meaning that
rcu_dereference_protected is allowable.

[akpm@linux-foundation.org: remove unneeded casts]
Signed-off-by: Mel Gorman <mel@csn.ul.ie>
Cc: Minchan Kim <minchan.kim@gmail.com>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Milton Miller <miltonm@bga.com>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Cc: <stable@kernel.org> [2.6.37.early]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

thp: add compound_trans_head() helper

Cleanup some code with common compound_trans_head helper.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Johannes Weiner <jweiner@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Cc: Avi Kivity <avi@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

thp: KSM on THP

This makes KSM full operational with THP pages.  Subpages are scanned
while the hugepage is still in place and delivering max cpu performance,
and only if there's a match and we're going to deduplicate memory, the
single hugepages with the subpage match is split.

There will be no false sharing between ksmd and khugepaged.  khugepaged
won't collapse 2m virtual regions with KSM pages inside.  ksmd also should
only split pages when the checksum matches and we're likely to split an
hugepage for some long living ksm page (usual ksm heuristic to avoid
sharing pages that get de-cowed).

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

thp: khugepaged: make khugepaged aware about madvise

MADV_HUGEPAGE and MADV_NOHUGEPAGE were fully effective only if run after
mmap and before touching the memory.  While this is enough for most
usages, it's little effort to make madvise more dynamic at runtime on an
existing mapping by making khugepaged aware about madvise.

MADV_HUGEPAGE: register in khugepaged immediately without waiting a page
fault (that may not ever happen if all pages are already mapped and the
"enabled" knob was set to madvise during the initial page faults).

MADV_NOHUGEPAGE: skip vmas marked VM_NOHUGEPAGE in khugepaged to stop
collapsing pages where not needed.

[akpm@linux-foundation.org: tweak comment]
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

thp: madvise(MADV_NOHUGEPAGE)

Add madvise MADV_NOHUGEPAGE to mark regions that are not important to be
hugepage backed.  Return -EINVAL if the vma is not of an anonymous type,
or the feature isn't built into the kernel.  Never silently return
success.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

thp: mm: define MADV_NOHUGEPAGE

Define MADV_NOHUGEPAGE.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

thp: compound_trans_order

Read compound_trans_order safe. Noop for CONFIG_TRANSPARENT_HUGEPAGE=n.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Cc: Daisuke Nishimura <nishimura@mxp.nes.nec.co.jp>
Cc: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

thp: fix memory-failure hugetlbfs vs THP collision

hugetlbfs was changed to allow memory failure to migrate the hugetlbfs
pages and that broke THP as split_huge_page was then called on hugetlbfs
pages too.

compound_head/order was also run unsafe on THP pages that can be splitted
at any time.

All compound_head() invocations in memory-failure.c that are run on pages
that aren't pinned and that can be freed and reused from under us (while
compound_head is running) are buggy because compound_head can return a
dangling pointer, but I'm not fixing this as this is a generic
memory-failure bug not specific to THP but it applies to hugetlbfs too, so
I can fix it later after THP is merged upstream.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

thp: add debug checks for mapcount related invariants

Add debug checks for invariants that if broken could lead to mapcount vs
page_mapcount debug checks to trigger later in split_huge_page.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

thp: transparent hugepage sysfs meminfo

Add hugepage statistics to per-node sysfs meminfo

Reviewed-by: Rik van Riel <riel@redhat.com>
Signed-off-by: David Rientjes <rientjes@google.com>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

thp: scale nr_rotated to balance memory pressure

Make sure we scale up nr_rotated when we encounter a referenced
transparent huge page.  This ensures pageout scanning balance is not
distorted when there are huge pages on the LRU.

Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

thp: fix anon memory statistics with transparent hugepages

Count each transparent hugepage as HPAGE_PMD_NR pages in the LRU
statistics, so the Active(anon) and Inactive(anon) statistics in
/proc/meminfo are correct.

Signed-off-by: Rik van Riel <riel@redhat.com>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

thp: disable transparent hugepages by default on small systems

On small systems, the extra memory used by the anti-fragmentation memory
reserve and simply because huge pages are smaller than large pages can
easily outweigh the benefits of less TLB misses.

A less obvious concern is if run on a NUMA machine with asymmetric node
sizes and one of them is very small.  The reserve could make the node
unusable.

In case of the crashdump kernel, OOMs have been observed due to the
anti-fragmentation memory reserve taking up a large fraction of the
crashdump image.

This patch disables transparent hugepages on systems with less than 1GB of
RAM, but the hugepage subsystem is fully initialized so administrators can
enable THP through /sys if desired.

Signed-off-by: Rik van Riel <riel@redhat.com>
Acked-by: Avi Kiviti <avi@redhat.com>
Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Acked-by: Mel Gorman <mel@csn.ul.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

thp: use compaction for all allocation orders

It makes no sense not to enable compaction for small order pages as we
don't want to end up with bad order 2 allocations and good and graceful
order 9 allocations.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

thp: use compaction in kswapd for GFP_ATOMIC order > 0

This takes advantage of memory compaction to properly generate pages of
order > 0 if regular page reclaim fails and priority level becomes more
severe and we don't reach the proper watermarks.

Signed-off-by: Andrea Arcangeli <aarcange@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>