To generate the right SPI tag messages we need to properly set
QUEUE_FLAG_QUEUED in the request_queue and mirror it to the
request.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Jens Axboe <axboe@kernel.dk> Reported-by: Meelis Roos <mroos@linux.ee> Tested-by: Meelis Roos <mroos@linux.ee> Cc: stable@vger.kernel.org
SCSI-2/SPI actually needs the tagged/untagged flag in the request to
work properly. Revert this patch and add a follow on to set it in
the right place.
Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Acked-by: Jens Axboe <axboe@kernel.dk> Reported-by: Meelis Roos <mroos@linux.ee> Tested-by: Meelis Roos <mroos@linux.ee> Cc: stable@vger.kernel.org
Tony Battersby [Thu, 23 Oct 2014 19:10:21 +0000 (15:10 -0400)]
lib/scatterlist: fix memory leak with scsi-mq
Fix a memory leak with scsi-mq triggered by commands with large data
transfer length.
Fixes: c53c6d6a68b1 ("scatterlist: allow chaining to preallocated chunks") Cc: <stable@vger.kernel.org> # 3.17.x Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Christoph Hellwig <hch@lst.de>
Linus Torvalds [Sun, 26 Oct 2014 18:35:51 +0000 (11:35 -0700)]
Merge tag 'armsoc-for-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"Another week, another small batch of fixes.
Most of these make zynq, socfpga and sunxi platforms work a bit
better:
- due to new requirements for regulators, DWMMC on socfpga broke past
v3.17
- SMP spinup fix for socfpga
- a few DT fixes for zynq
- another option (FIXED_REGULATOR) for sunxi is needed that used to
be selected by other options but no longer is.
- a couple of small DT fixes for at91
- ...and a couple for i.MX"
* tag 'armsoc-for-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
ARM: dts: imx28-evk: Let i2c0 run at 100kHz
ARM: i.MX6: Fix "emi" clock name typo
ARM: multi_v7_defconfig: enable CONFIG_MMC_DW_ROCKCHIP
ARM: sunxi_defconfig: enable CONFIG_REGULATOR_FIXED_VOLTAGE
ARM: dts: socfpga: Add a 3.3V fixed regulator node
ARM: dts: socfpga: Fix SD card detect
ARM: dts: socfpga: rename gpio nodes
ARM: at91/dt: sam9263: fix PLLB frequencies
power: reset: at91-reset: fix power down register
MAINTAINERS: add atmel ssc driver maintainer entry
arm: socfpga: fix fetching cpu1start_addr for SMP
ARM: zynq: DT: trivial: Fix mc node
ARM: zynq: DT: Add cadence watchdog node
ARM: zynq: DT: Add missing reference for memory-controller
ARM: zynq: DT: Add missing reference for ADC
ARM: zynq: DT: Add missing address for L2 pl310
ARM: zynq: DT: Remove 222 MHz OPP
ARM: zynq: DT: Fix GEM register area size
Olof Johansson [Sun, 26 Oct 2014 03:44:05 +0000 (20:44 -0700)]
Merge tag 'imx-fixes-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into fixes
Merge "ARM: imx: fixes for 3.18" from Shawn Guo:
The i.MX fixes for 3.18:
- Revert one patch which increases I2C bus frequency on imx28-evk
- Fix a typo on imx6q EIM clock name
* tag 'imx-fixes-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx28-evk: Let i2c0 run at 100kHz
ARM: i.MX6: Fix "emi" clock name typo
Linus Torvalds [Fri, 24 Oct 2014 19:48:47 +0000 (12:48 -0700)]
Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus
Pull MIPS fixes from Ralf Baechle:
"This is the first round of fixes and tying up loose ends for MIPS.
- plenty of fixes for build errors in specific obscure configurations
- remove redundant code on the Lantiq platform
- removal of a useless SEAD I2C driver that was causing a build issue
- fix an earlier TLB exeption handler fix to also work on Octeon.
- fix ISA level dependencies in FPU emulator's instruction decoding.
- don't hardcode kernel command line in Octeon software emulator.
- fix an earlier fix for the Loondson 2 clock setting"
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
MIPS: SEAD3: Fix I2C device registration.
MIPS: SEAD3: Nuke PIC32 I2C driver.
MIPS: ftrace: Fix a microMIPS build problem
MIPS: MSP71xx: Fix build error
MIPS: Malta: Do not build the malta-amon.c file if CMP is not enabled
MIPS: Prevent compiler warning from cop2_{save,restore}
MIPS: Kconfig: Add missing MIPS_CPS dependencies to PM and cpuidle
MIPS: idle: Remove leftover __pastwait symbol and its references
MIPS: Sibyte: Include the swarm subdir to the sb1250 LittleSur builds
MIPS: ptrace.h: Add a missing include
MIPS: ath79: Fix compilation error when CONFIG_PCI is disabled
MIPS: MSP71xx: Remove compilation error when CONFIG_MIPS_MT is present
MIPS: Octeon: Remove special case for simulator command line.
MIPS: tlbex: Properly fix HUGE TLB Refill exception handler
MIPS: loongson2_cpufreq: Fix CPU clock rate setting mismerge
pci: pci-lantiq: remove duplicate check on resource
MIPS: Lasat: Add missing CONFIG_PROC_FS dependency to PICVUE_PROC
MIPS: cp1emu: Fix ISA restrictions for cop1x_op instructions
Linus Torvalds [Fri, 24 Oct 2014 19:48:04 +0000 (12:48 -0700)]
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Catalin Marinas:
- enable 48-bit VA space now that KVM has been fixed, together with a
couple of fixes for pgd allocation alignment and initial memblock
current_limit. There is still a dependency on !ARM_SMMU which needs
to be updated as it uses the page table manipulation macros of the
host kernel
- eBPF fixes following changes/conflicts during the merging window
- Compat types affecting compat_elf_prpsinfo
- Compilation error on UP builds
- ASLR fix when /proc/sys/kernel/randomize_va_space == 0
- DT definitions for CLCD support on ARMv8 model platform
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Fix memblock current_limit with 64K pages and 48-bit VA
arm64: ASLR: Don't randomise text when randomise_va_space == 0
arm64: vexpress: Add CLCD support to the ARMv8 model platform
arm64: Fix compilation error on UP builds
Documentation/arm64/memory.txt: fix typo
net: bpf: arm64: minor fix of type in jited
arm64: bpf: add 'load 64-bit immediate' instruction
arm64: bpf: add 'shift by register' instructions
net: bpf: arm64: address randomize and write protect JIT code
arm64: mm: Correct fixmap pagetable types
arm64: compat: fix compat types affecting struct compat_elf_prpsinfo
arm64: Align less than PAGE_SIZE pgds naturally
arm64: Allow 48-bits VA space without ARM_SMMU
1) Fix boots with gcc-4.9 compiled sparc64 kernels.
2) Add missing __get_user_pages_fast() on sparc64 to fix hangs on
futexes used in transparent hugepage areas.
It's really idiotic to have a weak symbolled fallback that just
returns zero, and causes this kind of bug. There should be no
backup implementation and the link should fail if the architecture
fails to provide __get_user_pages_fast() and supports transparent
hugepages.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sparc64: Implement __get_user_pages_fast().
sparc64: Fix register corruption in top-most kernel stack frame during boot.
Linus Torvalds [Fri, 24 Oct 2014 19:42:55 +0000 (12:42 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm fixes from Paolo Bonzini:
"This is a pretty large update. I think it is roughly as big as what I
usually had for the _whole_ rc period.
There are a few bad bugs where the guest can OOPS or crash the host.
We have also started looking at attack models for nested
virtualization; bugs that usually result in the guest ring 0 crashing
itself become more worrisome if you have nested virtualization,
because the nested guest might bring down the non-nested guest as
well. For current uses of nested virtualization these do not really
have a security impact, but you never know and bugs are bugs
nevertheless.
A lot of these bugs are in 3.17 too, resulting in a large number of
stable@ Ccs. I checked that all the patches apply there with no
conflicts"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
kvm: vfio: fix unregister kvm_device_ops of vfio
KVM: x86: Wrong assertion on paging_tmpl.h
kvm: fix excessive pages un-pinning in kvm_iommu_map error path.
KVM: x86: PREFETCH and HINT_NOP should have SrcMem flag
KVM: x86: Emulator does not decode clflush well
KVM: emulate: avoid accessing NULL ctxt->memopp
KVM: x86: Decoding guest instructions which cross page boundary may fail
kvm: x86: don't kill guest on unknown exit reason
kvm: vmx: handle invvpid vm exit gracefully
KVM: x86: Handle errors when RIP is set during far jumps
KVM: x86: Emulator fixes for eip canonical checks on near branches
KVM: x86: Fix wrong masking on relative jump/call
KVM: x86: Improve thread safety in pit
KVM: x86: Prevent host from panicking on shared MSR writes.
KVM: x86: Check non-canonical addresses upon WRMSR
Linus Torvalds [Fri, 24 Oct 2014 19:41:50 +0000 (12:41 -0700)]
Merge tag 'stable/for-linus-3.18-b-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen bug fixes from David Vrabel:
- Fix regression in xen_clocksource_read() which caused all Xen guests
to crash early in boot.
- Several fixes for super rare race conditions in the p2m.
- Assorted other minor fixes.
* tag 'stable/for-linus-3.18-b-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/pci: Allocate memory for physdev_pci_device_add's optarr
x86/xen: panic on bad Xen-provided memory map
x86/xen: Fix incorrect per_cpu accessor in xen_clocksource_read()
x86/xen: avoid race in p2m handling
x86/xen: delay construction of mfn_list_list
x86/xen: avoid writing to freed memory after race in p2m handling
xen/balloon: Don't continue ballooning when BP_ECANCELED is encountered
Linus Torvalds [Fri, 24 Oct 2014 19:35:48 +0000 (12:35 -0700)]
Merge tag 'sound-3.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"Here are a chunk of small fixes since rc1: two PCM core fixes, one is
a long-standing annoyance about lockdep and another is an ARM64 mmap
fix.
The rest are a HD-audio HDMI hotplug notification fix, a fix for
missing NULL termination in Realtek codec quirks and a few new
device/codec-specific quirks as usual"
* tag 'sound-3.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - Add missing terminating entry to SND_HDA_PIN_QUIRK macro
ALSA: pcm: Fix false lockdep warnings
ALSA: hda - Fix inverted LED gpio setup for Lenovo Ideapad
ALSA: hda - hdmi: Fix missing ELD change event on plug/unplug
ALSA: usb-audio: Add support for Steinberg UR22 USB interface
ALSA: ALC283 codec - Avoid pop noise on headphones during suspend/resume
ALSA: pcm: use the same dma mmap codepath both for arm and arm64
Linus Torvalds [Fri, 24 Oct 2014 19:33:32 +0000 (12:33 -0700)]
Merge tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random
Pull /dev/random updates from Ted Ts'o:
"This adds a memzero_explicit() call which is guaranteed not to be
optimized away by GCC. This is important when we are wiping
cryptographically sensitive material"
* tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
crypto: memzero_explicit - make sure to clear out sensitive data
random: add and use memzero_explicit() for clearing data
Linus Torvalds [Fri, 24 Oct 2014 18:29:31 +0000 (11:29 -0700)]
Merge tag 'pm+acpi-3.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management updates from Rafael Wysocki:
"This is material that didn't make it to my 3.18-rc1 pull request for
various reasons, mostly related to timing and travel (LinuxCon EU /
LPC) plus a couple of fixes for recent bugs.
The only really new thing here is the PM QoS class for memory
bandwidth, but it is simple enough and users of it will be added in
the next cycle. One major change in behavior is that platform devices
enumerated by ACPI will use 32-bit DMA mask by default. Also included
is an ACPICA update to a new upstream release, but that's mostly
cleanups, changes in tools and similar. The rest is fixes and
cleanups mostly.
Specifics:
- Fix for a recent PCI power management change that overlooked the
fact that some IRQ chips might not be able to configure PCIe PME
for system wakeup from Lucas Stach.
- Fix for a bug introduced in 3.17 where acpi_device_wakeup() is
called with a wrong ordering of arguments from Zhang Rui.
- A bunch of intel_pstate driver fixes (all -stable candidates) from
Dirk Brandewie, Gabriele Mazzotta and Pali Rohár.
- Fixes for a rather long-standing problem with the OOM killer and
the freezer that frozen processes killed by the OOM do not actually
release any memory until they are thawed, so OOM-killing them is
rather pointless, with a couple of cleanups on top (Michal Hocko,
Cong Wang, Rafael J Wysocki).
- ACPICA update to upstream release 20140926, inlcuding mostly
cleanups reducing differences between the upstream ACPICA and the
kernel code, tools changes (acpidump, acpiexec) and support for the
_DDN object (Bob Moore, Lv Zheng).
- New PM QoS class for memory bandwidth from Tomeu Vizoso.
- Default 32-bit DMA mask for platform devices enumerated by ACPI
(this change is mostly needed for some drivers development in
progress targeted at 3.19) from Heikki Krogerus.
- ACPI EC driver cleanups, mostly related to debugging, from Lv
Zheng.
- cpufreq-dt driver updates from Thomas Petazzoni.
- powernv cpuidle driver update from Preeti U Murthy"
* tag 'pm+acpi-3.18-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (34 commits)
intel_pstate: Correct BYT VID values.
intel_pstate: Fix BYT frequency reporting
intel_pstate: Don't lose sysfs settings during cpu offline
cpufreq: intel_pstate: Reflect current no_turbo state correctly
cpufreq: expose scaling_cur_freq sysfs file for set_policy() drivers
cpufreq: intel_pstate: Fix setting max_perf_pct in performance policy
PCI / PM: handle failure to enable wakeup on PCIe PME
ACPI: invoke acpi_device_wakeup() with correct parameters
PM / freezer: Clean up code after recent fixes
PM: convert do_each_thread to for_each_process_thread
OOM, PM: OOM killed task shouldn't escape PM suspend
freezer: remove obsolete comments in __thaw_task()
freezer: Do not freeze tasks killed by OOM killer
ACPI / platform: provide default DMA mask
cpuidle: powernv: Populate cpuidle state details by querying the device-tree
cpufreq: cpufreq-dt: adjust message related to regulators
cpufreq: cpufreq-dt: extend with platform_data
cpufreq: allow driver-specific data
ACPI / EC: Cleanup coding style.
ACPI / EC: Refine event/query debugging messages.
...
Linus Torvalds [Fri, 24 Oct 2014 18:21:43 +0000 (11:21 -0700)]
Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux
Pull thermal management updates from Zhang Rui:
"Sorry that I missed the merge window as there is a bug found in the
last minute, and I have to fix it and wait for the code to be tested
in linux-next tree for a few days. Now the buggy patch has been
dropped entirely from my next branch. Thus I hope those changes can
still be merged in 3.18-rc2 as most of them are platform thermal
driver changes.
Specifics:
- introduce ACPI INT340X thermal drivers.
Newer laptops and tablets may have thermal sensors and other
devices with thermal control capabilities that are exposed for the
OS to use via the ACPI INT340x device objects. Several drivers are
introduced to expose the temperature information and cooling
ability from these objects to user-space via the normal thermal
framework.
From: Lu Aaron, Lan Tianyu, Jacob Pan and Zhang Rui.
- introduce a new thermal governor, which just uses a hysteresis to
switch abruptly on/off a cooling device. This governor can be used
to control certain fan devices that can not be throttled but just
switched on or off. From: Peter Feuerer.
- introduce support for some new thermal interrupt functions on
i.MX6SX, in IMX thermal driver. From: Anson, Huang.
- introduce tracing support on thermal framework. From: Punit
Agrawal.
- small fixes in OF thermal and thermal step_wise governor"
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: (25 commits)
Thermal: int340x thermal: select ACPI fan driver
Thermal: int3400_thermal: use acpi_thermal_rel parsing APIs
Thermal: int340x_thermal: expose acpi thermal relationship tables
Thermal: introduce int3403 thermal driver
Thermal: introduce INT3402 thermal driver
Thermal: move the KELVIN_TO_MILLICELSIUS macro to thermal.h
ACPI / Fan: support INT3404 thermal device
ACPI / Fan: add ACPI 4.0 style fan support
ACPI / fan: convert to platform driver
ACPI / fan: use acpi_device_xxx_power instead of acpi_bus equivelant
ACPI / fan: remove no need check for device pointer
ACPI / fan: remove unused macro
Thermal: int3400 thermal: register to thermal framework
Thermal: int3400 thermal: add capability to detect supporting UUIDs
Thermal: introduce int3400 thermal driver
ACPI: add ACPI_TYPE_LOCAL_REFERENCE support to acpi_extract_package()
ACPI: make acpi_create_platform_device() an external API
thermal: step_wise: fix: Prevent from binary overflow when trend is dropping
ACPI: introduce ACPI int340x thermal scan handler
thermal: Added Bang-bang thermal governor
...
Catalin Marinas [Fri, 24 Oct 2014 17:16:47 +0000 (18:16 +0100)]
arm64: Fix memblock current_limit with 64K pages and 48-bit VA
With 48-bit VA space, the 64K page configuration uses 3 levels instead
of 2 and PUD_SIZE != PMD_SIZE. Since with 64K pages we only cover
PMD_SIZE with the initial swapper_pg_dir populated in head.S, the
memblock current_limit needs to be set accordingly in map_mem() to avoid
allocating unmapped memory. The memblock current_limit is progressively
increased as more blocks are mapped.
David S. Miller [Fri, 24 Oct 2014 16:59:02 +0000 (09:59 -0700)]
sparc64: Implement __get_user_pages_fast().
It is not sufficient to only implement get_user_pages_fast(), you
must also implement the atomic version __get_user_pages_fast()
otherwise you end up using the weak symbol fallback implementation
which simply returns zero.
This is dangerous, because it causes the futex code to loop forever
if transparent hugepages are supported (see get_futex_key()).
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 23 Oct 2014 19:58:13 +0000 (12:58 -0700)]
sparc64: Fix register corruption in top-most kernel stack frame during boot.
Meelis Roos reported that kernels built with gcc-4.9 do not boot, we
eventually narrowed this down to only impacting machines using
UltraSPARC-III and derivitive cpus.
The crash happens right when the first user process is spawned:
[ 54.451346] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004
[ 54.451346]
[ 54.571516] CPU: 1 PID: 1 Comm: init Not tainted 3.16.0-rc2-00211-gd7933ab #96
[ 54.666431] Call Trace:
[ 54.698453] [0000000000762f8c] panic+0xb0/0x224
[ 54.759071] [000000000045cf68] do_exit+0x948/0x960
[ 54.823123] [000000000042cbc0] fault_in_user_windows+0xe0/0x100
[ 54.902036] [0000000000404ad0] __handle_user_windows+0x0/0x10
[ 54.978662] Press Stop-A (L1-A) to return to the boot prom
[ 55.050713] ---[ end Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000004
Further investigation showed that compiling only per_cpu_patch() with
an older compiler fixes the boot.
Detailed analysis showed that the function is not being miscompiled by
gcc-4.9, but it is using a different register allocation ordering.
With the gcc-4.9 compiled function, something during the code patching
causes some of the %i* input registers to get corrupted. Perhaps
we have a TLB miss path into the firmware that is deep enough to
cause a register window spill and subsequent restore when we get
back from the TLB miss trap.
Let's plug this up by doing two things:
1) Stop using the firmware stack for client interface calls into
the firmware. Just use the kernel's stack.
2) As soon as we can, call into a new function "start_early_boot()"
to put a one-register-window buffer between the firmware's
deepest stack frame and the top-most initial kernel one.
Reported-by: Meelis Roos <mroos@linux.ee> Tested-by: Meelis Roos <mroos@linux.ee> Signed-off-by: David S. Miller <davem@davemloft.net>
Arun Chandran [Fri, 10 Oct 2014 11:31:24 +0000 (12:31 +0100)]
arm64: ASLR: Don't randomise text when randomise_va_space == 0
When user asks to turn off ASLR by writing "0" to
/proc/sys/kernel/randomize_va_space there should not be
any randomization to mmap base, stack, VDSO, libs, text and heap
Currently arm64 violates this behavior by randomising text.
Fix this by defining a constant ELF_ET_DYN_BASE. The randomisation of
mm->mmap_base is done by setup_new_exec -> arch_pick_mmap_layout ->
mmap_base -> mmap_rnd.
Wanpeng Li [Thu, 9 Oct 2014 10:30:08 +0000 (18:30 +0800)]
kvm: vfio: fix unregister kvm_device_ops of vfio
After commit 80ce163 (KVM: VFIO: register kvm_device_ops dynamically),
kvm_device_ops of vfio can be registered dynamically. Commit 3c3c29fd
(kvm-vfio: do not use module_init) move the dynamic register invoked by
kvm_init in order to fix broke unloading of the kvm module. However,
kvm_device_ops of vfio is unregistered after rmmod kvm-intel module
which lead to device type collision detection warning after kvm-intel
module reinsmod.
without rmmod/insmod kvm.ko
This patch fixes the bug by unregistering kvm_device_ops of vfio when the
kvm-intel module is removed.
Reported-by: Liu Rongrong <rongrongx.liu@intel.com> Fixes: 3c3c29fd0d7cddc32862c350d0700ce69953e3bd Signed-off-by: Wanpeng Li <wanpeng.li@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Nadav Amit [Tue, 30 Sep 2014 17:49:18 +0000 (20:49 +0300)]
KVM: x86: Wrong assertion on paging_tmpl.h
Even after the recent fix, the assertion on paging_tmpl.h is triggered.
Apparently, the assertion wants to check that the PAE is always set on
long-mode, but does it in incorrect way. Note that the assertion is not
enabled unless the code is debugged by defining MMU_DEBUG.
Signed-off-by: Nadav Amit <namit@cs.technion.ac.il> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
kvm: fix excessive pages un-pinning in kvm_iommu_map error path.
The third parameter of kvm_unpin_pages() when called from
kvm_iommu_map_pages() is wrong, it should be the number of pages to un-pin
and not the page size.
This error was facilitated with an inconsistent API: kvm_pin_pages() takes
a size, but kvn_unpin_pages() takes a number of pages, so fix the problem
by matching the two.
This was introduced by commit 350b8bd ("kvm: iommu: fix the third parameter
of kvm_iommu_put_pages (CVE-2014-3601)"), which fixes the lack of
un-pinning for pages intended to be un-pinned (i.e. memory leak) but
unfortunately potentially aggravated the number of pages we un-pin that
should have stayed pinned. As far as I understand though, the same
practical mitigations apply.
This issue was found during review of Red Hat 6.6 patches to prepare
Ksplice rebootless updates.
Thanks to Vegard for his time on a late Friday evening to help me in
understanding this code.
Nadav Amit [Mon, 13 Oct 2014 10:04:14 +0000 (13:04 +0300)]
KVM: x86: PREFETCH and HINT_NOP should have SrcMem flag
The decode phase of the x86 emulator assumes that every instruction with the
ModRM flag, and which can be used with RIP-relative addressing, has either
SrcMem or DstMem. This is not the case for several instructions - prefetch,
hint-nop and clflush.
Adding SrcMem|NoAccess for prefetch and hint-nop and SrcMem for clflush.
This fixes CVE-2014-8480.
Fixes: 41061cdb98a0bec464278b4db8e894a3121671f5 Cc: stable@vger.kernel.org Signed-off-by: Nadav Amit <namit@cs.technion.ac.il> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Nadav Amit [Mon, 13 Oct 2014 10:04:13 +0000 (13:04 +0300)]
KVM: x86: Emulator does not decode clflush well
Currently, all group15 instructions are decoded as clflush (e.g., mfence,
xsave). In addition, the clflush instruction requires no prefix (66/f2/f3)
would exist. If prefix exists it may encode a different instruction (e.g.,
clflushopt).
Creating a group for clflush, and different group for each prefix.
This has been the case forever, but the next patch needs the cflush group
in order to fix a bug introduced in 3.17.
Fixes: 41061cdb98a0bec464278b4db8e894a3121671f5 Cc: stable@vger.kernel.org Signed-off-by: Nadav Amit <namit@cs.technion.ac.il> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Paolo Bonzini [Thu, 23 Oct 2014 12:54:14 +0000 (14:54 +0200)]
KVM: emulate: avoid accessing NULL ctxt->memopp
A failure to decode the instruction can cause a NULL pointer access.
This is fixed simply by moving the "done" label as close as possible
to the return.
This fixes CVE-2014-8481.
Reported-by: Andy Lutomirski <luto@amacapital.net> Cc: stable@vger.kernel.org Fixes: 41061cdb98a0bec464278b4db8e894a3121671f5 Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ralf Baechle [Fri, 24 Oct 2014 11:27:37 +0000 (13:27 +0200)]
MIPS: SEAD3: Nuke PIC32 I2C driver.
A platform driver for which nothing ever registers the corresponding
platform device.
Also it was driving the same hardware as sead3-i2c-drv.c so redundant
anyway and couldn't co-exist with that driver because each of them was
using a private spinlock to protect access to the same hardware
resources.
This also fixes a randconfig problem:
arch/mips/mti-sead3/sead3-pic32-i2c-drv.c: In function 'i2c_platform_probe':
arch/mips/mti-sead3/sead3-pic32-i2c-drv.c:345:2: error: implicit declaration of
function 'i2c_add_numbered_adapter' [-Werror=implicit-function-declaration]
ret = i2c_add_numbered_adapter(&priv->adap);
^
arch/mips/mti-sead3/sead3-pic32-i2c-drv.c: In function
'i2c_platform_remove':
arch/mips/mti-sead3/sead3-pic32-i2c-drv.c:361:2: error: implicit declaration
of function 'i2c_del_adapter' [-Werror=implicit-function-declaration]
i2c_del_adapter(&priv->adap);
Nadav Amit [Thu, 2 Oct 2014 22:10:04 +0000 (01:10 +0300)]
KVM: x86: Decoding guest instructions which cross page boundary may fail
Once an instruction crosses a page boundary, the size read from the second page
disregards the common case that part of the operand resides on the first page.
As a result, fetch of long insturctions may fail, and thereby cause the
decoding to fail as well.
Cc: stable@vger.kernel.org Fixes: 5cfc7e0f5e5e1adf998df94f8e36edaf5d30d38e Signed-off-by: Nadav Amit <namit@cs.technion.ac.il> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
KVM_EXIT_UNKNOWN is a kvm bug, we don't really know whether it was
triggered by a priveledged application. Let's not kill the guest: WARN
and inject #UD instead.
Cc: stable@vger.kernel.org Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Petr Matousek [Tue, 23 Sep 2014 18:22:30 +0000 (20:22 +0200)]
kvm: vmx: handle invvpid vm exit gracefully
On systems with invvpid instruction support (corresponding bit in
IA32_VMX_EPT_VPID_CAP MSR is set) guest invocation of invvpid
causes vm exit, which is currently not handled and results in
propagation of unknown exit to userspace.
Fix this by installing an invvpid vm exit handler.
This is CVE-2014-3646.
Cc: stable@vger.kernel.org Signed-off-by: Petr Matousek <pmatouse@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Nadav Amit [Thu, 18 Sep 2014 19:39:39 +0000 (22:39 +0300)]
KVM: x86: Handle errors when RIP is set during far jumps
Far jmp/call/ret may fault while loading a new RIP. Currently KVM does not
handle this case, and may result in failed vm-entry once the assignment is
done. The tricky part of doing so is that loading the new CS affects the
VMCS/VMCB state, so if we fail during loading the new RIP, we are left in
unconsistent state. Therefore, this patch saves on 64-bit the old CS
descriptor and restores it if loading RIP failed.
This fixes CVE-2014-3647.
Cc: stable@vger.kernel.org Signed-off-by: Nadav Amit <namit@cs.technion.ac.il> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Nadav Amit [Thu, 18 Sep 2014 19:39:38 +0000 (22:39 +0300)]
KVM: x86: Emulator fixes for eip canonical checks on near branches
Before changing rip (during jmp, call, ret, etc.) the target should be asserted
to be canonical one, as real CPUs do. During sysret, both target rsp and rip
should be canonical. If any of these values is noncanonical, a #GP exception
should occur. The exception to this rule are syscall and sysenter instructions
in which the assigned rip is checked during the assignment to the relevant
MSRs.
This patch fixes the emulator to behave as real CPUs do for near branches.
Far branches are handled by the next patch.
This fixes CVE-2014-3647.
Cc: stable@vger.kernel.org Signed-off-by: Nadav Amit <namit@cs.technion.ac.il> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Andy Honig [Wed, 27 Aug 2014 21:42:54 +0000 (14:42 -0700)]
KVM: x86: Improve thread safety in pit
There's a race condition in the PIT emulation code in KVM. In
__kvm_migrate_pit_timer the pit_timer object is accessed without
synchronization. If the race condition occurs at the wrong time this
can crash the host kernel.
This fixes CVE-2014-3611.
Cc: stable@vger.kernel.org Signed-off-by: Andrew Honig <ahonig@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Andy Honig [Wed, 27 Aug 2014 18:16:44 +0000 (11:16 -0700)]
KVM: x86: Prevent host from panicking on shared MSR writes.
The previous patch blocked invalid writes directly when the MSR
is written. As a precaution, prevent future similar mistakes by
gracefulling handle GPs caused by writes to shared MSRs.
Cc: stable@vger.kernel.org Signed-off-by: Andrew Honig <ahonig@google.com>
[Remove parts obsoleted by Nadav's patch. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Nadav Amit [Tue, 16 Sep 2014 00:24:05 +0000 (03:24 +0300)]
KVM: x86: Check non-canonical addresses upon WRMSR
Upon WRMSR, the CPU should inject #GP if a non-canonical value (address) is
written to certain MSRs. The behavior is "almost" identical for AMD and Intel
(ignoring MSRs that are not implemented in either architecture since they would
anyhow #GP). However, IA32_SYSENTER_ESP and IA32_SYSENTER_EIP cause #GP if
non-canonical address is written on Intel but not on AMD (which ignores the top
32-bits).
Accordingly, this patch injects a #GP on the MSRs which behave identically on
Intel and AMD. To eliminate the differences between the architecutres, the
value which is written to IA32_SYSENTER_ESP and IA32_SYSENTER_EIP is turned to
canonical value before writing instead of injecting a #GP.
Some references from Intel and AMD manuals:
According to Intel SDM description of WRMSR instruction #GP is expected on
WRMSR "If the source register contains a non-canonical address and ECX
specifies one of the following MSRs: IA32_DS_AREA, IA32_FS_BASE, IA32_GS_BASE,
IA32_KERNEL_GS_BASE, IA32_LSTAR, IA32_SYSENTER_EIP, IA32_SYSENTER_ESP."
According to AMD manual instruction manual:
LSTAR/CSTAR (SYSCALL): "The WRMSR instruction loads the target RIP into the
LSTAR and CSTAR registers. If an RIP written by WRMSR is not in canonical
form, a general-protection exception (#GP) occurs."
IA32_GS_BASE and IA32_FS_BASE (WRFSBASE/WRGSBASE): "The address written to the
base field must be in canonical form or a #GP fault will occur."
IA32_KERNEL_GS_BASE (SWAPGS): "The address stored in the KernelGSbase MSR must
be in canonical form."
This patch fixes CVE-2014-3610.
Cc: stable@vger.kernel.org Signed-off-by: Nadav Amit <namit@cs.technion.ac.il> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Olof Johansson [Fri, 24 Oct 2014 04:05:45 +0000 (21:05 -0700)]
Merge tag 'socfpga_fixes_for_3.18' of git://git.rocketboards.org/linux-socfpga-next into fixes
Merge "SOCFPGA fixes for 3.18" from Dinh Nguyen:
These patches fixes an SMP and SDMMC driver hang during boot up on the
SOCFPGA platform.
Patch "arm: socfpga: fix fetching cpu1start_addr for SMP" fixes the SMP
trampoline code in order for CPU1 to correctly fetch it's cpu1start_addr.
Patch "ARM: dts: socfpga: rename gpio nodes" renames that GPIO node in order
to allow a standard way of specifying status="okay" in the board DTS file.
Patch "ARM: dts: socfpga: Fix SD card detect" fixes a SDMMC driver hang
during boot. The reason for the hang was the deferred probe of the SDMMC
driver was waiting for the GPIO resource that would never come.
Patch "ARM: dts: socfpga: Add a 3.3V fixed regulator node" adds a fixed
regulator node for the SDMMC driver to use.
* tag 'socfpga_fixes_for_3.18' of git://git.rocketboards.org/linux-socfpga-next:
ARM: dts: socfpga: Add a 3.3V fixed regulator node
ARM: dts: socfpga: Fix SD card detect
ARM: dts: socfpga: rename gpio nodes
arm: socfpga: fix fetching cpu1start_addr for SMP
Olof Johansson [Fri, 24 Oct 2014 04:02:49 +0000 (21:02 -0700)]
Merge tag 'at91-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91 into fixes
Merge "at91: fixes for v3.18 #1" from Nicholas Ferre:
First AT91 fixes for 3.18:
- one more MAINTAINERS entry for the SSC driver
- a fix for the newly introduced power/reset driver
- a fix on at91sam9263 USB due to PLLB misconfiguration
* tag 'at91-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91:
ARM: at91/dt: sam9263: fix PLLB frequencies
power: reset: at91-reset: fix power down register
MAINTAINERS: add atmel ssc driver maintainer entry
Al Viro [Thu, 23 Oct 2014 17:26:21 +0000 (13:26 -0400)]
fix inode leaks on d_splice_alias() failure exits
d_splice_alias() callers expect it to either stash the inode reference
into a new alias, or drop the inode reference. That makes it possible
to just return d_splice_alias() result from ->lookup() instance, without
any extra housekeeping required.
Unfortunately, that should include the failure exits. If d_splice_alias()
returns an error, it leaves the dentry it has been given negative and
thus it *must* drop the inode reference. Easily fixed, but it goes way
back and will need backporting.
Cc: stable@vger.kernel.org Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Markos Chandras [Mon, 20 Oct 2014 08:39:31 +0000 (09:39 +0100)]
MIPS: ftrace: Fix a microMIPS build problem
Code before the .fixup section needs to have the .insn directive.
This has no side effects on MIPS32/64 but it affects the way microMIPS
loads the address for the return label.
Fixes the following build problem:
mips-linux-gnu-ld: arch/mips/built-in.o: .fixup+0x4a0: Unsupported jump between
ISA modes; consider recompiling with interlinking enabled.
mips-linux-gnu-ld: final link failed: Bad value
Makefile:819: recipe for target 'vmlinux' failed
The fix is similar to 1658f914ff91c3bf ("MIPS: microMIPS:
Disable LL/SC and fix linker bug.")
Miklos Szeredi [Thu, 23 Oct 2014 22:14:39 +0000 (00:14 +0200)]
fs: limit filesystem stacking depth
Add a simple read-only counter to super_block that indicates how deep this
is in the stack of filesystems. Previously ecryptfs was the only stackable
filesystem and it explicitly disallowed multiple layers of itself.
Overlayfs, however, can be stacked recursively and also may be stacked
on top of ecryptfs or vice versa.
To limit the kernel stack usage we must limit the depth of the
filesystem stack. Initially the limit is set to 2.
Erez Zadok [Thu, 23 Oct 2014 22:14:38 +0000 (00:14 +0200)]
overlayfs: implement show_options
This is useful because of the stacking nature of overlayfs. Users like to
find out (via /proc/mounts) which lower/upper directory were used at mount
time.
AV: even failing ovl_parse_opt() could've done some kstrdup()
AV: failure of ovl_alloc_entry() should end up with ENOMEM, not EINVAL
Andy Whitcroft [Thu, 23 Oct 2014 22:14:38 +0000 (00:14 +0200)]
overlayfs: add statfs support
Add support for statfs to the overlayfs filesystem. As the upper layer
is the target of all write operations assume that the space in that
filesystem is the space in the overlayfs. There will be some inaccuracy as
overwriting a file will copy it up and consume space we were not expecting,
but it is better than nothing.
Use the upper layer dentry and mount from the overlayfs root inode,
passing the statfs call to that filesystem.
Signed-off-by: Andy Whitcroft <apw@canonical.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Miklos Szeredi [Thu, 23 Oct 2014 22:14:38 +0000 (00:14 +0200)]
overlay filesystem
Overlayfs allows one, usually read-write, directory tree to be
overlaid onto another, read-only directory tree. All modifications
go to the upper, writable layer.
This type of mechanism is most often used for live CDs but there's a
wide variety of other uses.
The implementation differs from other "union filesystem"
implementations in that after a file is opened all operations go
directly to the underlying, lower or upper, filesystems. This
simplifies the implementation and allows native performance in these
cases.
The dentry tree is duplicated from the underlying filesystems, this
enables fast cached lookups without adding special support into the
VFS. This uses slightly more memory than union mounts, but dentries
are relatively small.
Currently inodes are duplicated as well, but it is a possible
optimization to share inodes for non-directories.
Opening non directories results in the open forwarded to the
underlying filesystem. This makes the behavior very similar to union
mounts (with the same limitations vs. fchmod/fchown on O_RDONLY file
descriptors).
Usage:
mount -t overlayfs overlayfs -olowerdir=/lower,upperdir=/upper/upper,workdir=/upper/work /overlay
The following cotributions have been folded into this patch:
Neil Brown <neilb@suse.de>:
- minimal remount support
- use correct seek function for directories
- initialise is_real before use
- rename ovl_fill_cache to ovl_dir_read
Felix Fietkau <nbd@openwrt.org>:
- fix a deadlock in ovl_dir_read_merged
- fix a deadlock in ovl_remove_whiteouts
Erez Zadok <ezk@fsl.cs.sunysb.edu>
- fix cleanup after WARN_ON
Sedat Dilek <sedat.dilek@googlemail.com>
- fix up permission to confirm to new API
Robin Dong <hao.bigrat@gmail.com>
- fix possible leak in ovl_new_inode
- create new inode in ovl_link
Andy Whitcroft <apw@canonical.com>
- switch to __inode_permission()
- copy up i_uid/i_gid from the underlying inode
AV:
- ovl_copy_up_locked() - dput(ERR_PTR(...)) on two failure exits
- ovl_clear_empty() - one failure exit forgetting to do unlock_rename(),
lack of check for udir being the parent of upper, dropping and regaining
the lock on udir (which would require _another_ check for parent being
right).
- bogus d_drop() in copyup and rename [fix from your mail]
- copyup/remove and copyup/rename races [fix from your mail]
- ovl_dir_fsync() leaving ERR_PTR() in ->realfile
- ovl_entry_free() is pointless - it's just a kfree_rcu()
- fold ovl_do_lookup() into ovl_lookup()
- manually assigning ->d_op is wrong. Just use ->s_d_op.
[patches picked from Miklos]:
* copyup/remove and copyup/rename races
* bogus d_drop() in copyup and rename
Also thanks to the following people for testing and reporting bugs:
Jordi Pujol <jordipujolp@gmail.com>
Andy Whitcroft <apw@canonical.com>
Michal Suchanek <hramrach@centrum.cz>
Felix Fietkau <nbd@openwrt.org>
Erez Zadok <ezk@fsl.cs.sunysb.edu>
Randy Dunlap <rdunlap@xenotime.net>
Miklos Szeredi [Thu, 23 Oct 2014 22:14:37 +0000 (00:14 +0200)]
shmem: support RENAME_WHITEOUT
Allocate a dentry, initialize it with a whiteout and hash it in the place
of the old dentry. Later the old dentry will be moved away and the
whiteout will remain.
Miklos Szeredi [Thu, 23 Oct 2014 22:14:37 +0000 (00:14 +0200)]
ext4: support RENAME_WHITEOUT
Add whiteout support to ext4_rename(). A whiteout inode (chrdev/0,0) is
created before the rename takes place. The whiteout inode is added to the
old entry instead of deleting it.
Linus Torvalds [Thu, 23 Oct 2014 22:04:27 +0000 (15:04 -0700)]
Merge tag 'remove-weak-declarations' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull weak function declaration removal from Bjorn Helgaas:
"The "weak" attribute is commonly used for the default version of a
function, where an architecture can override it by providing a strong
version.
Some header file declarations included the "weak" attribute. That's
error-prone because it causes every implementation to be weak, with no
strong version at all, and the linker chooses one based on link order.
What we want is the "weak" attribute only on the *definition* of the
default implementation. These changes remove "weak" from the
declarations, leaving it on the default definitions"
* tag 'remove-weak-declarations' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
uprobes: Remove "weak" from function declarations
memory-hotplug: Remove "weak" from memory_block_size_bytes() declaration
kgdb: Remove "weak" from kgdb_arch_pc() declaration
ARC: kgdb: generic kgdb_arch_pc() suffices
vmcore: Remove "weak" from function declarations
clocksource: Remove "weak" from clocksource_default_clock() declaration
x86, intel-mid: Remove "weak" from function declarations
audit: Remove "weak" from audit_classify_compat_syscall() declaration
Linus Torvalds [Thu, 23 Oct 2014 21:45:09 +0000 (14:45 -0700)]
Merge branch 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 EFI updates from Peter Anvin:
"This patchset falls under the "maintainers that grovel" clause in the
v3.18-rc1 announcement. We had intended to push it late in the merge
window since we got it into the -tip tree relatively late.
Many of these are relatively simple things, but there are a couple of
key bits, especially Ard's and Matt's patches"
* 'x86-efi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (24 commits)
rtc: Disable EFI rtc for x86
efi: rtc-efi: Export platform:rtc-efi as module alias
efi: Delete the in_nmi() conditional runtime locking
efi: Provide a non-blocking SetVariable() operation
x86/efi: Adding efi_printks on memory allocationa and pci.reads
x86/efi: Mark initialization code as such
x86/efi: Update comment regarding required phys mapped EFI services
x86/efi: Unexport add_efi_memmap variable
x86/efi: Remove unused efi_call* macros
efi: Resolve some shadow warnings
arm64: efi: Format EFI memory type & attrs with efi_md_typeattr_format()
ia64: efi: Format EFI memory type & attrs with efi_md_typeattr_format()
x86: efi: Format EFI memory type & attrs with efi_md_typeattr_format()
efi: Introduce efi_md_typeattr_format()
efi: Add macro for EFI_MEMORY_UCE memory attribute
x86/efi: Clear EFI_RUNTIME_SERVICES if failing to enter virtual mode
arm64/efi: Do not enter virtual mode if booting with efi=noruntime or noefi
arm64/efi: uefi_init error handling fix
efi: Add kernel param efi=noruntime
lib: Add a generic cmdline parse function parse_option_str
...
* pm-cpuidle:
cpuidle: powernv: Populate cpuidle state details by querying the device-tree
* pm-cpufreq:
intel_pstate: Correct BYT VID values.
intel_pstate: Fix BYT frequency reporting
intel_pstate: Don't lose sysfs settings during cpu offline
cpufreq: intel_pstate: Reflect current no_turbo state correctly
cpufreq: expose scaling_cur_freq sysfs file for set_policy() drivers
cpufreq: intel_pstate: Fix setting max_perf_pct in performance policy
cpufreq: cpufreq-dt: adjust message related to regulators
cpufreq: cpufreq-dt: extend with platform_data
cpufreq: allow driver-specific data
Dirk Brandewie [Mon, 13 Oct 2014 15:37:44 +0000 (08:37 -0700)]
intel_pstate: Correct BYT VID values.
Using a VID value that is not high enough for the requested P state can
cause machine checks. Add a ceiling function to ensure calulated VIDs
with fractional values are set to the next highest integer VID value.
The algorythm for calculating the non-trubo VID from the BIOS writers
guide is:
vid_ratio = (vid_max - vid_min) / (max_pstate - min_pstate)
vid = ceiling(vid_min + (req_pstate - min_pstate) * vid_ratio)
Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Dirk Brandewie [Mon, 13 Oct 2014 15:37:43 +0000 (08:37 -0700)]
intel_pstate: Fix BYT frequency reporting
BYT has a different conversion from P state to frequency than the core
processors. This causes the min/max and current frequency to be
misreported on some BYT SKUs. Tested on BYT N2820, Ivybridge and
Haswell processors.
Link: https://bugzilla.yoctoproject.org/show_bug.cgi?id=6663 Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
cpufreq: intel_pstate: Reflect current no_turbo state correctly
Some BIOSes modify the state of MSR_IA32_MISC_ENABLE_TURBO_DISABLE
based on the current power source for the system battery AC vs
battery. Reflect the correct current state and ability to modify the
no_turbo sysfs file based on current state of
MSR_IA32_MISC_ENABLE_TURBO_DISABLE.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=83151 Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Gabriele Mazzotta <gabriele.mzt@gmail.com> Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Dirk Brandewie [Mon, 13 Oct 2014 15:37:40 +0000 (08:37 -0700)]
cpufreq: expose scaling_cur_freq sysfs file for set_policy() drivers
Currently the core does not expose scaling_cur_freq for set_policy()
drivers this breaks some userspace monitoring tools.
Change the core to expose this file for all drivers and if the
set_policy() driver supports the get() callback use it to retrieve the
current frequency.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=73741 Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Dirk Brandewie <dirk.j.brandewie@intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Pali Rohár [Wed, 15 Oct 2014 23:16:51 +0000 (01:16 +0200)]
cpufreq: intel_pstate: Fix setting max_perf_pct in performance policy
Code which changes policy to powersave changes also max_policy_pct based on
max_freq. Code which change max_perf_pct has upper limit base on value
max_policy_pct. When policy is changing from powersave back to performance
then max_policy_pct is not changed. Which means that changing max_perf_pct is
not possible to high values if max_freq was too low in powersave policy.
Lucas Stach [Wed, 22 Oct 2014 12:31:55 +0000 (14:31 +0200)]
PCI / PM: handle failure to enable wakeup on PCIe PME
If the irqchip handling the PCIe PME interrupt is not able
to enable interrupt wakeup we should properly reflect this
in the PME suspend status.
This fixes a kernel warning on resume, where it would try
to disable the irq wakeup that failed to be activated while
suspending, for example:
WARNING: CPU: 0 PID: 609 at kernel/irq/manage.c:536 irq_set_irq_wake+0xc0/0xf8()
Unbalanced IRQ 384 wake disable
Fixes: 76cde7e49590 (PCI / PM: Make PCIe PME interrupts wake up from suspend-to-idle) Reported-and-tested-by: Richard Zhu <richard.zhu@freescale.com> Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Linus Torvalds [Thu, 23 Oct 2014 19:44:59 +0000 (12:44 -0700)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Intel, nouveau, radeon and qxl.
Mostly for bugs introduced in the merge window, nothing too shocking"
[ And one cirrus fix added later and not mentioned in the pull request.. - Linus ]
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/cirrus: bind also to qemu-xen-traditional
qxl: don't create too large primary surface
drm/nouveau: fix regression on agp boards
drm/gt215/gr: fix initialisation on gddr5 boards
drm/radeon: reduce sparse false positive warnings
drm/radeon: fix vm page table block size calculation
drm/ttm: Don't evict BOs outside of the requested placement range
drm/ttm: Don't skip fpfn check if lpfn is 0 in ttm_bo_mem_compat
drm/radeon: use gart memory for DMA ring tests
drm/radeon: fix speaker allocation setup
drm/radeon: initialize sadb to NULL in the audio code
drm/i915: fix short vs. long hpd detection
drm/i915: Don't trust the DP_DETECT bit for eDP ports on CHV
Revert "drm/radeon/dpm: drop clk/voltage dependency filters for SI"
Revert "drm/radeon: drop btc_get_max_clock_from_voltage_dependency_table"
drm/i915: properly reenable gen8 pipe IRQs
drm/i915: Move DIV_ROUND_CLOSEST_ULL macro to header
drm/i915: intel_backlight scale() math WA
Markos Chandras [Thu, 9 Oct 2014 09:34:19 +0000 (10:34 +0100)]
MIPS: Malta: Do not build the malta-amon.c file if CMP is not enabled
The malta-amon.c file provides functions to access the YAMON Monitoring
interface to bring up secondary VPEs in case of SMP/CMP. As a
result of which, there is no need to build it if CMP is not used.
Paul Burton [Thu, 25 Sep 2014 09:26:15 +0000 (10:26 +0100)]
MIPS: Prevent compiler warning from cop2_{save,restore}
The no-op cases of cop2_save & cop2_restore lead to the following
warnings being emitted during build with recent versions of gcc (tested
using gcc 4.8.3 from the Mentor Sourcery CodeBench 2014.05 toolchain):
In file included from ./arch/mips/include/asm/switch_to.h:18:0,
from kernel/sched/core.c:78:
kernel/sched/core.c: In function 'finish_task_switch':
include/asm-generic/current.h:6:45: warning: value computed is not used [-Wunused-value]
#define get_current() (current_thread_info()->task)
^
./arch/mips/include/asm/cop2.h:48:32: note: in definition of macro 'cop2_restore'
#define cop2_restore(r) do { (r); } while (0)
^
include/asm-generic/current.h:7:17: note: in expansion of macro 'get_current'
#define current get_current()
^
./arch/mips/include/asm/switch_to.h:114:16: note: in expansion of macro 'current'
cop2_restore(current); \
^
kernel/sched/core.c:2225:2: note: in expansion of macro 'finish_arch_switch'
finish_arch_switch(prev);
^
Avoid the warning by "using" the value by casting to void.
MIPS: idle: Remove leftover __pastwait symbol and its references
The __pastwait symbol was only used by the address_is_in_r4k_wait_irqoff
function but this is no longer used since the SMTC removal in commit b633648c5ad3 ('MIPS: MT: Remove SMTC support'). That symbol also led to
build failures under certain random configuration due to the way the
compiler compiled the r4k_wait_irqoff function. If that function was
called multiple times, the __pastwait symbol was redefined breaking the
build like this:
CHK include/generated/compile.h
CC arch/mips/kernel/idle.o
{standard input}: Assembler messages:
{standard input}:527: Error: symbol `__pastwait' is already defined
Boris Ostrovsky [Mon, 4 Aug 2014 22:17:23 +0000 (18:17 -0400)]
xen/pci: Allocate memory for physdev_pci_device_add's optarr
physdev_pci_device_add's optarr[] is a zero-sized array and therefore
reference to add.optarr[0] is accessing memory that does not belong to
the 'add' variable.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Martin Kelly [Fri, 17 Oct 2014 03:48:11 +0000 (20:48 -0700)]
x86/xen: panic on bad Xen-provided memory map
Panic if Xen provides a memory map with 0 entries. Although this is
unlikely, it is better to catch the error at the point of seeing the map
than later on as a symptom of some other crash.
Signed-off-by: Martin Kelly <martkell@amazon.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Boris Ostrovsky [Thu, 16 Oct 2014 21:02:15 +0000 (17:02 -0400)]
x86/xen: Fix incorrect per_cpu accessor in xen_clocksource_read()
Commit 89cbc76768c2 ("x86: Replace __get_cpu_var uses") replaced
__get_cpu_var() with this_cpu_ptr() in xen_clocksource_read() in such a
way that instead of accessing a structure pointed to by a per-cpu pointer
we are trying to get to a per-cpu structure.
__this_cpu_read() of the pointer is the more appropriate accessor.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Juergen Gross [Fri, 17 Oct 2014 11:16:06 +0000 (13:16 +0200)]
x86/xen: avoid race in p2m handling
When a new p2m leaf is allocated this leaf is linked into the p2m tree
via cmpxchg. Unfortunately the compare value for checking the success
of the update is read after checking for the need of a new leaf. It is
possible that a new leaf has been linked into the tree concurrently
in between. This could lead to a leaked memory page and to the loss of
some p2m entries.
Avoid the race by using the read compare value for checking the need
of a new p2m leaf and use ACCESS_ONCE() to get it.
There are other places which seem to need ACCESS_ONCE() to ensure
proper operation. Change them accordingly.
Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Juergen Gross [Tue, 14 Oct 2014 11:33:46 +0000 (13:33 +0200)]
x86/xen: delay construction of mfn_list_list
The 3 level p2m tree for the Xen tools is constructed very early at
boot by calling xen_build_mfn_list_list(). Memory needed for this tree
is allocated via extend_brk().
As this tree (other than the kernel internal p2m tree) is only needed
for domain save/restore, live migration and crash dump analysis it
doesn't matter whether it is constructed very early or just some
milliseconds later when memory allocation is possible by other means.
This patch moves the call of xen_build_mfn_list_list() just after
calling xen_pagetable_p2m_copy() simplifying this function, too, as it
doesn't have to bother with two parallel trees now. The same applies
for some other internal functions.
While simplifying code, make early_can_reuse_p2m_middle() static and
drop the unused second parameter. p2m_mid_identity_mfn can be removed
as well, it isn't used either.
Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Juergen Gross [Tue, 14 Oct 2014 09:00:18 +0000 (11:00 +0200)]
x86/xen: avoid writing to freed memory after race in p2m handling
In case a race was detected during allocation of a new p2m tree
element in alloc_p2m() the new allocated mid_mfn page is freed without
updating the pointer to the found value in the tree. This will result
in overwriting the just freed page with the mfn of the p2m leaf.
Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Boris Ostrovsky [Tue, 7 Oct 2014 21:00:07 +0000 (17:00 -0400)]
xen/balloon: Don't continue ballooning when BP_ECANCELED is encountered
Commit 3dcf63677d4e ("xen/balloon: cancel ballooning if adding new
memory failed") makes reserve_additional_memory() return BP_ECANCELED
when an error is encountered. This error, however, is ignored by the
caller (balloon_process()) since it is overwritten by subsequent call
to update_schedule(). This results in continuous attempts to add more
memory, all of which are likely to fail again.
We should stop trying to schedule next iteration of ballooning when
the current one has failed.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com> Signed-off-by: David Vrabel <david.vrabel@citrix.com>
Markos Chandras [Fri, 17 Oct 2014 09:49:38 +0000 (10:49 +0100)]
MIPS: Sibyte: Include the swarm subdir to the sb1250 LittleSur builds
Fixes the following randconfig build problem:
arch/mips/built-in.o: In function `show_cpuinfo':
proc.c:(.text+0xde84): undefined reference to `get_system_type'
arch/mips/built-in.o: In function `sb1250_setup':
(.init.text+0x428): undefined reference to `get_system_type'
arch/mips/built-in.o: In function `setup_arch':
(.init.text+0x178c): undefined reference to `plat_mem_setup'
Makefile:930: recipe for target 'vmlinux' failed
Aaro Koskinen [Mon, 13 Oct 2014 21:42:08 +0000 (00:42 +0300)]
MIPS: ptrace.h: Add a missing include
Commit a79ebea62010 (MIPS: ptrace: Fix user pt_regs definition,
use in ptrace_{get, set}regs()) converted struct pt_regs to use __u64.
Some userspace applications (e.g. GDB) include this file directly,
and fail to see this type. Fix by including <linux/types.h>.
The patch fixes the following build failure with GDB 7.8 when using
GLIBC headers created against Linux 3.17:
In file included from /home/aaro/los/work/shared/gdb-7.8/gdb/mips-linux-nat.c:37:0:
/home/aaro/los/work/mips/rootfs/mips-linux-gnu/usr/include/asm/ptrace.h:32:2: error: unknown type name '__u64'
__u64 regs[32];
^
/home/aaro/los/work/mips/rootfs/mips-linux-gnu/usr/include/asm/ptrace.h:35:2: error: unknown type name '__u64'
__u64 lo;
^
/home/aaro/los/work/mips/rootfs/mips-linux-gnu/usr/include/asm/ptrace.h:36:2: error: unknown type name '__u64'
__u64 hi;
^
Fixes: a79ebea62010 ("MIPS: ptrace: Fix user pt_regs definition, use in ptrace_{get, set}regs()") Cc: stable@vger.kernel.org # 3.17 Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: Alex Smith <alex@alex-smith.me.uk> Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8067/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Dinh Nguyen [Thu, 16 Oct 2014 19:43:53 +0000 (14:43 -0500)]
ARM: dts: socfpga: Add a 3.3V fixed regulator node
Without the 3.3V regulator node, the SDMMC driver will give these warnings:
dw_mmc ff704000.dwmmc0: No vmmc regulator found
dw_mmc ff704000.dwmmc0: No vqmmc regulator found
This patch adds the regulator node, and points the SD/MMC to the regulator.
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com> Reviewed-by: Doug Anderson <dianders@chromium.org>
---
v3: Rename nodes to have schematic-name_regulator and remove "boot-on" and
"always-on"
v2: Move the regulator nodes to their respective board dts file and
correctly rename them to match the schematic
Dinh Nguyen [Thu, 16 Oct 2014 19:54:51 +0000 (14:54 -0500)]
ARM: dts: socfpga: Fix SD card detect
Without this patch, the booting the SOCFPGA platform would hang at the
SDMMC driver loading. The issue, debugged by Doug Anderson, turned out
to be that the GPIO bank used by the SD card-detect was not set to
status="okay".
Also update the cd-gpios to point to portb of the &gpio1 GPIO IP.
Suggested-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
---
v4: Use &gpio1 to set status="okay" and update cd-gpio=&portb
v3: Correctly degugged the issue to be a gpio node not having status="okay"