[media] davinci: vpif: add check for genuine interrupts in the isr
As the same interrupt is shared between capture and display devices,
sometimes we get isr calls where the interrupt might not genuinely belong
to capture or display. Hence, add a condition in the isr to check for
interrupt ownership and channel number to make sure we do not
service wrong interrupts.
Lad, Prabhakar [Fri, 22 Jun 2012 09:19:28 +0000 (06:19 -0300)]
[media] videobuf-dma-contig: restore buffer mapping for uncached bufers
from commit a8f3c203e19b702fa5e8e83a9b6fb3c5a6d1cce4
restore the mapping scheme for uncached buffers,
which was changed in a common scheme for cached and uncached.
This apparently was wrong, and was probably intended only for cached buffers.
the fix fixes the crash observed while mapping uncached buffers.
Hans de Goede [Sat, 23 Jun 2012 07:39:58 +0000 (04:39 -0300)]
[media] shark2: New driver for the Griffin radioSHARK v2 USB radio receiver
This driver consists of 2 parts, a generic tea5777 driver and a driver
for the Griffin radioSHARK v2 USB radio receiver, which is the only driver
using the generic tea5777 for now.
This first version only implements FM support, once the the new
VIDIOC_ENUM_FREQ_BANDS API is upstream I'll also add AM support.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Sat, 7 Jul 2012 19:11:11 +0000 (16:11 -0300)]
[media] v4l2-ioctl: Don't assume file->private_data always points to a v4l2_fh
Commit efbceecd4522a41b8442c6b4f68b4508d57d1ccf, adds a number of helper
functions for ctrl related ioctls to v4l2-ioctl.c, these helpers assume that
if file->private_data != NULL, it points to a v4l2_fh, which is only the case
for drivers which actually use v4l2_fh.
This breaks for example bttv which use the "filedata" pointer for its own uses,
and now all the ctrl ioctls try to use whatever its filedata points to as
v4l2_fh and think it has a ctrl_handler, leading to:
This patch adds the missing test_bit(V4L2_FL_USES_V4L2_FH, &vfd->flags) tests
to the ctrl ioctl helpers v4l2_fh paths, fixing the issues with for example
the bttv driver.
Signed-off-by: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans de Goede [Sat, 7 Jul 2012 15:11:57 +0000 (12:11 -0300)]
[media] gspca: Don't use video_device_node_name in v4l2_device release handler
When the v4l2_device release handler gets called the kobject under
vdev->dev has already been released, so we cannot use kobject_name on
it (which video_device_node_name does).
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans de Goede [Sat, 30 Jun 2012 12:03:21 +0000 (09:03 -0300)]
[media] gspca_konica: Fix init sequence
The konica needs a freaking large time (circa 6.5 seconds) to "boot", and
does not want to be bothered while doing so, so sleep for 6 seconds, and
then query its status register at 100ms intervals until it becomes ready.
This removes the "reg_w err: -32" messages shown in dmesg whenever a
konica cam gets initialized, and also fixes the camera not working when
an app tries to use it directly after it has been plugged in and after
a suspend/resume cycle.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans de Goede [Sat, 30 Jun 2012 09:44:47 +0000 (06:44 -0300)]
[media] gspca: Add reset_resume callback to all sub-drivers
1) The gspca-core's suspend/resume code is such that resume being called after
a reset is safe / ok.
2) All devices tested sofar seem to need the reset_resume callback to work
properly over a suspend
3) The USB-core won't call the reset_resume callback for devices which don't
need it
Thus it seems the simplest and the best to just add the callback to all
sub-drivers, rather then adding the callbacks one-by-one as each driver gets
tested with suspend/resume.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans de Goede [Wed, 27 Jun 2012 19:48:33 +0000 (16:48 -0300)]
[media] gspca: Remove bogus JPEG quality controls from various sub-drivers
Various gspca-subdrivers have a JPEG quality control which only changes
the quantization tables in the JPEG headers send to user-space without
making any changes to the settings of the bridge. Remove these bogus / wrong
controls.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 15 Jun 2012 08:24:26 +0000 (05:24 -0300)]
[media] gspca: always call v4l2_ctrl_handler_setup after start
This ensures the controls are setup correctly.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 23 May 2012 20:17:12 +0000 (17:17 -0300)]
[media] gspca: clear priv field and disable relevant ioctls
The v4l2_pix_format priv field must be 0, so zero it.
Also disable ioctls that are not implemented by a subdriver.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Mon, 21 May 2012 08:37:39 +0000 (05:37 -0300)]
[media] gspca-topro: convert to the control framework
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 18 May 2012 09:45:30 +0000 (06:45 -0300)]
[media] vc032x: convert to the control framework
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 18 May 2012 08:48:33 +0000 (05:48 -0300)]
[media] xirlink_cit: convert to the control framework
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 18 May 2012 08:22:38 +0000 (05:22 -0300)]
[media] vicam: convert to the control framework
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 18 May 2012 08:12:09 +0000 (05:12 -0300)]
[media] tv8532: convert to the control framework
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 18 May 2012 06:41:58 +0000 (03:41 -0300)]
[media] gspca_t613: convert to the control framework
Changes by Hans de Goede:
-rework how gain controls work to better match control framework
-make awb + gain + red/blue-balance a single auto-cluster
-only add the HFLIP control for TAS5130a sensor cams, as it breaks the
video on other cams
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 16 May 2012 11:49:10 +0000 (08:49 -0300)]
[media] sunplus: convert to the control framework
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 16 May 2012 11:38:34 +0000 (08:38 -0300)]
[media] stk014: convert to the control framework
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 16 May 2012 11:29:16 +0000 (08:29 -0300)]
[media] sq930x: convert to the control framework
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 16 May 2012 11:20:44 +0000 (08:20 -0300)]
[media] spca561: convert to the control framework
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 16 May 2012 10:48:03 +0000 (07:48 -0300)]
[media] spca508: convert to the control framework
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 16 May 2012 10:45:59 +0000 (07:45 -0300)]
[media] spca506: convert to the control framework
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 16 May 2012 10:41:33 +0000 (07:41 -0300)]
[media] spca505: convert to the control framework
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 15 Jun 2012 08:26:05 +0000 (05:26 -0300)]
[media] gspca-spca501: remove old function prototypes
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 16 May 2012 10:38:45 +0000 (07:38 -0300)]
[media] spca501: convert to the control framework
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 16 May 2012 10:29:00 +0000 (07:29 -0300)]
[media] spca500: convert to the control framework
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 16 May 2012 10:21:41 +0000 (07:21 -0300)]
[media] spca1528: convert to the control framework
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 16 May 2012 10:14:14 +0000 (07:14 -0300)]
[media] es401: convert to the control framework
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 16 May 2012 09:45:44 +0000 (06:45 -0300)]
[media] ov534_9: convert to the control framework
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 16 May 2012 09:19:46 +0000 (06:19 -0300)]
[media] ov519: convert to the control framework
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 16 May 2012 07:48:28 +0000 (04:48 -0300)]
[media] nw80x: convert to the control framework
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Mon, 14 May 2012 12:45:06 +0000 (09:45 -0300)]
[media] gspca-mr97310a: convert to the control framework
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Mon, 14 May 2012 10:35:37 +0000 (07:35 -0300)]
[media] gspca-konica: convert to the control framework
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Mon, 14 May 2012 09:30:06 +0000 (06:30 -0300)]
[media] gspca-jeilinj: convert to the control framework
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Mon, 14 May 2012 08:04:26 +0000 (05:04 -0300)]
[media] gspca-etoms: convert to the control framework
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Mon, 14 May 2012 07:54:13 +0000 (04:54 -0300)]
[media] gspca-cpia1: convert to the control framework
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Mon, 14 May 2012 07:09:17 +0000 (04:09 -0300)]
[media] gspca-conex: convert to the control framework
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antonio Ospite [Wed, 16 May 2012 21:42:46 +0000 (18:42 -0300)]
[media] gspca_ov534: Convert to the control framework
Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antonio Ospite [Wed, 16 May 2012 21:42:44 +0000 (18:42 -0300)]
[media] gspca_kinect: remove traces of the gspca control mechanism
This driver has no controls, so there is no need to convert it to the
control framework.
Signed-off-by: Antonio Ospite <ospite@studenti.unina.it> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans de Goede [Thu, 14 Jun 2012 12:43:12 +0000 (09:43 -0300)]
[media] radio-si470x: Always use interrupt to wait for tune/seek completion
Since USB receives STATUS_RSSI updates through the interrupt endpoint,
there is no need to poll with USB, so get rid of the polling.
Note this also changes the order in which the probing of USB devices is done,
to avoid si470x_set_chan getting called before the interrupt endpoint is being
monitored.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans de Goede [Thu, 14 Jun 2012 12:43:11 +0000 (09:43 -0300)]
[media] radio-si470x: Don't unnecesarily read registers on G_TUNER
Reading registers from the pcear USB dongles with the si470x causes a
loud pop (and an alsa buffer overrun). Since most radio apps periodically
call G_TUNER to update mono/stereo, signal and afc status this leads
to the music . pop . music . pop . music -> not good.
On the internet there is an howto for flashing the pcear with a newer
firmware from the silabs reference boardto fix this, but:
1) This howto relies on a special version of the driver which allows
firmware flashing
2) We should try to avoid the answer to a bug report being upgrade your
firmware, if at all possible
3) Windows does not suffer from the pop sounds
After a quick look at the driver I found at that the register reads are
not necessary at all, as the device gives us the necessary status through
usb interrupt packets, and the driver already uses these!
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans de Goede [Fri, 18 May 2012 15:21:57 +0000 (12:21 -0300)]
[media] snd_tea575x: Add a cannot_mute flag
Some devices which use the tea575x tuner chip don't allow direct control
over the IO pins, and thus cannot mute the audio output.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> CC: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Some devices which use the tea575x tuner chip don't allow bit banging the
lines, instead they offer a method to directly set / get the contents of the
25 bit shift-register in the chip. Notably the Griffin radioSHARK USB radio
receiver does this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> CC: Ondrej Zary <linux@rainbow-software.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Wed, 18 Jul 2012 12:34:59 +0000 (09:34 -0300)]
[media] Fix VIDIOC_TRY_EXT_CTRLS regression
Fixes an omission in the new v4l2_ioctls table: VIDIOC_TRY_EXT_CTRLS
must get the INFO_FL_CTRL flag, just like all the other control
related ioctls, otherwise the ioctl core won't know it also has
to check whether v4l2_fh->ctrl_handler is non-zero before it can
decide that this ioctl is not implemented.
Caught by v4l2-compliance while I was testing the mem2mem_testdev driver.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Merge branch 'v4l_for_linus' into staging/for_v3.6
* v4l_for_linus: (31 commits)
[media] Revert "[media] V4L: JPEG class documentation corrections"
[media] s5p-fimc: Add missing FIMC-LITE file operations locking
[media] omap3isp: preview: Fix contrast and brightness handling
[media] omap3isp: preview: Fix output size computation depending on input format
[media] winbond-cir: Initialise timeout, driver_type and allowed_protos
[media] winbond-cir: Fix txandrx module info
[media] cx23885: Silence unknown command warnings
[media] cx23885: add support for HVR-1255 analog (cx23888 variant)
[media] cx23885: make analog support work for HVR_1250 (cx23885 variant)
[media] cx25840: fix vsrc/hsrc usage on cx23888 designs
[media] cx25840: fix regression in HVR-1800 analog audio
[media] cx25840: fix regression in analog support hue/saturation controls
[media] cx25840: fix regression in HVR-1800 analog support
[media] s5p-mfc: Fixed setup of custom controls in decoder and encoder
[media] cx231xx: don't DMA to random addresses
[media] em28xx: fix em28xx-rc load
[media] dvb-core: Release semaphore on error path dvb_register_device()
[media] s5p-fimc: Stop media entity pipeline if fimc_pipeline_validate fails
[media] s5p-fimc: Fix compiler warning in fimc-lite.c
[media] s5p-fimc: media_entity_pipeline_start() may fail
...
drivers/media/dvb/dvb-usb/dw2102.c:1478:18: error: ‘USB_PID_TEVII_S421’ undeclared here (not in a function)
drivers/media/dvb/dvb-usb/dw2102.c:1479:18: error: ‘USB_PID_TEVII_S632’ undeclared here (not in a function)
commit 5126f2590bee412e3053de851cb07f531e4be36a
"v4l2-dev: add flag to have the core lock all file operations"
introduced an additional bit flag (V4L2_FL_LOCK_ALL_FOPS) that
should be set by drivers that use the v4l2 core lock for all file
operations. Since this driver has been merged at the same time as
the core changes it doesn't set this flags and thus its all file
operations except IOCTL are not properly serialized. Fix this by
adding file ops locking in the driver.
Sakari Ailus [Fri, 15 Jun 2012 13:22:25 +0000 (10:22 -0300)]
[media] v4l: Correct conflicting V4L2 subdev selection API documentation
The API reference documents that the KEEP_CONFIG flag tells the
configuration should not be propagated by the driver whereas the interface
documentation (dev-subdev.xml) prohibited any changes to the rest of the
pipeline. Resolve the conflict by changing the API reference to disallow
changes.
[media] Feature removal: V4L2 selections API target and flag definitions
After unification of the V4L2 and V4L2 subdev selection targets and flags
the old flags are no longer required. Thus they can be removed. However, as
the API is present in a kernel release, this must go through the feature
removal process.
Sakari Ailus [Wed, 13 Jun 2012 19:01:10 +0000 (16:01 -0300)]
[media] v4l: Unify selection flags
Unify flags on the selection interfaces on V4L2 and V4L2 subdev. Flags are
very similar to targets in this case: there are more similarities than
differences between the two interfaces.
Sakari Ailus [Fri, 1 Jun 2012 16:56:53 +0000 (13:56 -0300)]
[media] v4l: Common documentation for selection targets
Both V4L2 and V4L2 subdev interface have very similar selection APIs with
differences foremost related to in-memory and media bus formats. However,
the selection targets are the same for both. Most targets are and in the
future will likely continue to be more the same than with any differences.
Thus it makes sense to unify the documentation of the targets.
Sakari Ailus [Fri, 18 May 2012 12:31:18 +0000 (09:31 -0300)]
[media] v4l: Unify selection targets across V4L2 and V4L2 subdev interfaces
Change the users of V4L2_SUBDEV_SEL_TGT_* targets to use V4L2_SEL_TGT_*
instead. The common definitions are moved to a new header file,
include/linux/v4l2-common.h.
Sakari Ailus [Thu, 17 May 2012 20:50:45 +0000 (17:50 -0300)]
[media] v4l: Remove "_ACTUAL" from subdev selection API target definition names
The string "_ACTUAL" does not say anything more about the target names. Drop
it. V4L2 selection API was changed by "V4L: Remove "_ACTIVE" from the
selection target name definitions" by Sylwester Nawrocki. This patch does
the same for the V4L2 subdev API.
[media] V4L: Remove "_ACTIVE" from the selection target name definitions
This patch drops the _ACTIVE part from the selection target names
as a prerequisite to unify the selection target names across the subdev
and regular video node API.
The meaning of V4L2_SEL_TGT_*_ACTIVE and V4L2_SUBDEV_SEL_TGT_*_ACTUAL
selection targets is logically the same. Different names add to confusion
where both APIs are used in a single driver or an application. For some
system configurations different names may lead to interoperability issues.
For backwards compatibility V4L2_SEL_TGT_CROP_ACTIVE and
V4L2_SEL_TGT_COMPOSE_ACTIVE are defined as aliases to V4L2_SEL_TGT_CROP
and V4L2_SEL_TGT_COMPOSE. These aliases will be removed after deprecation
period, according to Documentation/feature-removal-schedule.txt.
[media] omap3isp: preview: Fix contrast and brightness handling
Commit bac387efbb88cf0e8df6f46a38387897cea464ee ("omap3isp: preview:
Simplify configuration parameters access") added three fields to the
preview_update structure, but failed to properly update the related
initializers. Fix this.
[media] omap3isp: preview: Fix output size computation depending on input format
The preview engine crops 4 columns and 4 lines when CFA is enabled.
Commit b2da46e52fe7871cba36e1a435844502c0eccf39 ("omap3isp: preview: Add
support for greyscale input") inverted the condition by mistake, fix
this.
[media] cx23885: add support for HVR-1255 analog (cx23888 variant)
Get the HVR-1255 analog support working for all supported inputs. This
includes introduction of a new board profile for an OEM variant which
doesn't have all the same inputs as the retail version of the board.
Validated with the following boards:
HVR-1255 (0070:2259)
Thanks to Steven Toth and Hauppauge for loaning me various boards to
regression test with.
[media] cx23885: make analog support work for HVR_1250 (cx23885 variant)
The analog support in the cx23885 driver was completely broken for the
HVR-1250. Add the necessary code.
Note that this only implements analog for the composite and s-video
inputs. The tuner input continues to be non-functional due to a lack of
analog support in the mt2131 driver.
Validated with the following boards:
HVR-1250 (0070:7911)
Thanks to Steven Toth and Hauppauge for loaning me various boards to
regression test with.
[media] cx25840: fix vsrc/hsrc usage on cx23888 designs
The location of the vsrc/hsrc registers moved in the cx23888, causing
the s_mbus call to fail prematurely indicating that "720x480 is not a
valid size". The function bailed out before many pertinent registers
were set related to the scaler (causing unexpected results in video
rendering when doing raw video capture).
[media] cx25840: fix regression in HVR-1800 analog audio
The refactoring of the cx25840 driver to support the cx23888 caused breakage
with the existing support for cx23885/cx23887 analog audio support. Tweak
the code so that it only uses the code if it really is a cx23888 instead of
applying it to all cx2388x based devices.
[media] cx25840: fix regression in analog support hue/saturation controls
Fix regression in HVR-1800 analog support hue/saturation controls.
The changes made for the cx23888 caused regressions in the analog
support for cx23885/cx23887 based boards (partly due to changes in the
locations of the hue/saturation controls). As a result the wrong
registers were being overwritten.
Add code to use the correct registers if it's a cx23888
[media] cx25840: fix regression in HVR-1800 analog support
The refactoring of the cx25840 driver to support the cx23888 caused breakage
with the existing support for cx23885/cx23887 analog support. Rework the
routines such that the new code is only used for the 888.
David Dillow [Mon, 18 Jun 2012 03:15:21 +0000 (00:15 -0300)]
[media] cx231xx: don't DMA to random addresses
Commit 7a6f6c29d264cdd2fe0eb3d923217eed5f0ad134 (cx231xx: use
URB_NO_TRANSFER_DMA_MAP) was intended to avoid mapping the DMA buffer
for URB twice. This works for the URBs allocated with usb_alloc_urb(),
as those are allocated from cohernent DMA pools, but the flag was also
added for the VBI and audio URBs, which have a manually allocated area.
This leaves the random trash in the structure after allocation as the
DMA address, corrupting memory and preventing VBI and audio from
working. Letting the USB core map the buffers solves the problem.
Cc: stable@kernel.org Signed-off-by: David Dillow <dave@thedillows.org> Cc: Sri Deevi <srinivasa.deevi@conexant.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Du, Changbin [Tue, 3 Jul 2012 09:27:19 +0000 (06:27 -0300)]
[media] media: gpio-ir-recv: add allowed_protos for platform data
It's better to give platform code a chance to specify the allowed
protocols to use.
[mchehab@redhat.com: fix merge conflict with a patch that made
half of this change] Signed-off-by: Du, Changbin <changbin.du@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 25 May 2012 15:15:30 +0000 (12:15 -0300)]
[media] cx88: don't use current_norm
current_norm can only be used if there is a single device node since it is
local to the device node. In this case multiple device nodes share a single
tuner.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 25 May 2012 15:04:10 +0000 (12:04 -0300)]
[media] cx88: fix a number of v4l2-compliance violations
- missing COMPRESSED flag for MPEG formats
- set colorspace
- set sizeimage
- add tuner index checks
- setup the frequency ranges correctly
- add missing g_chip_ident ioctl
- fix audmode handling
- don't handle vbi formats on a video node and vice versa.
cx88 now passes the v4l2-compliance tests.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
projects / linux-beck.git / log