Dave Airlie [Mon, 15 Sep 2014 20:20:53 +0000 (06:20 +1000)]
Merge branch 'linux-3.18' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-next
This is the main merge request for Nouveau 3.18, overview:
- various bits of roy's gt21x clock work
- various bits of kepler memory clock work (don't get too excited, there's at least one more major bit left that's busting higher freqs)
- misc fan control improvements
- kepler hdmi infoframe fixes
- dp audio
- l2 cache + cbc improvements
* 'linux-3.18' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: (68 commits)
drm/gt214-/disp: enable dp audio
drm/gt214-/kms: fix hda eld regression
drm/g94-/disp: calculate some dp audio constants
drm/gt214-/kms: perform hda codec setup on displayport too
drm/gk104-/disp: infoframe registers moved yet again on kepler
drm/nouveau/bios: parse older ramcfg/timing data like we do newer ones
drm/nva3/fb/ram: Per-partition regs
drm/nouveau/fb/ram: Support strided regs
drm/nv50/fb/ram: Store the number of partitions in the designated fields
drm/nv50/kms: Set VBLANK time in modeset script
drm/nouveau/bios: Add rammap support for version 1.0
drm/gf100-/pwr/memx: block host and fifo around reclock
drm/nouveau/pwr/memx: fix command ordering around block/unblock
drm/nouveau/pwr/memx: rename fb off/on to block/unblock
drm/nva3/clk: Pause the GPU before reclocking
drm/nouveau/gpio: rename g92 class to g94
drm/gk104-/fb/ram: move fb enable/disable to same place as nvidia
drm/gk104/fb/ram: twiddle some more bits when reclocking
drm/nouveau/bios: parse another large chunk of random memory config data
drm/gk104-/fb/ram: perform certain steps only when bios data differs
...
Ben Skeggs [Thu, 11 Sep 2014 12:59:13 +0000 (22:59 +1000)]
drm/nouveau/pwr/memx: rename fb off/on to block/unblock
More accurate as to the function of the opcodes. Not only is FB disabled,
but the host is prevented from touching the GPU. An upcoming patch for
Kepler will also halt PFIFO (as NVIDIA does).
Emil Velikov [Mon, 8 Sep 2014 19:27:57 +0000 (20:27 +0100)]
drm/nouveau/gpio: rename g92 class to g94
nv92 hardware has only 16 interrupt lines, while nv94 and later
has 32. Accessing 0xe0c{0,4} registers on nv92 can lead to incorrect
PDISP setup. This is a regression introduced with
Ben Skeggs [Mon, 8 Sep 2014 03:38:02 +0000 (13:38 +1000)]
drm/gk104-/fb/ram: use parsed timing data in mr routines
All the other chipsets should be moved over to this too. It's not needed
yet for the upcoming commits, so left this step as it'll conflict badly
with Roy's GT21x reclocking work.
Pierre Moreau [Mon, 18 Aug 2014 20:43:24 +0000 (22:43 +0200)]
drm/nouveau: Display Nouveau boot options at launch
It can help to remove any ambiguity about which options were passed to Nouveau,
especially in case the user had some options set in /etc/modprobe.d/*.conf that
he forgot about, as they won't appear in a dmesg.
Signed-off-by: Pierre Moreau <pierre.morrow@free.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Martin Peres [Sun, 17 Aug 2014 15:33:10 +0000 (17:33 +0200)]
drm/nouveau/pwr: fix the timers implementation with concurent processes
The problem with the current implementation is that adding a timer improperly
checked which process would time up first by not taking into account how much
time elapsed since their timer got scheduled. Rework the re-scheduling
decision t fix this.
The catch with this fix is that we are limited to scheduling timers of up to
2^31 ticks to avoid any potential overflow. Since we are unlikely to need to
wait for more than a second, this won't be a problem :)
Another possible fix would be to decrement the timeouts of all processes but
it would duplicate a lot of code and dealing with edge cases wasn't pretty
last time I checked.
Signed-off-by: Martin Peres <martin.peres@free.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Ben Skeggs [Tue, 12 Aug 2014 03:54:37 +0000 (13:54 +1000)]
drm/nouveau/core/mm: fill in holes with "allocated" nodes
The allocation algorithm doesn't expect there to be holes in the mm, which
causes its alignment/cutoff calculations to choke (and go negative) when
encountering the last chunk of a block before a hole.
The least expensive solution is to simply fill in any holes with nodes
that are pre-marked as being allocated.
Dave Airlie [Mon, 15 Sep 2014 09:55:55 +0000 (19:55 +1000)]
Merge tag 'topic/core-stuff-2014-09-15' of git://anongit.freedesktop.org/drm-intel into drm-next
Here's the updated topic/core-stuff pull request with the two patches
already merged into drm-fixes dropped.
* tag 'topic/core-stuff-2014-09-15' of git://anongit.freedesktop.org/drm-intel:
drm: Drop modeset locking from crtc init function
drm/i915/hdmi: Enable pipe pixel replication for SD interlaced modes
drm/edid: Reduce horizontal timings for pixel replicated modes
drm: Include task->name and master status in debugfs clients info
drm/gem: Fix kerneldoc typo
drm: use c99 initializers in structures
drm: fix drm_modeset_lock.h kernel-doc notation
Daniel Vetter [Mon, 8 Sep 2014 07:02:49 +0000 (09:02 +0200)]
drm: Drop modeset locking from crtc init function
At driver init no one can access modeset objects and we're
single-threaded. So locking is just cargo-culting here. Worse, with
the new ww mutexes and ww mutex slowpath debugging the mutex_lock
might actually fail, and we don't have the full-blown ww recovery
dance.
Which then leads to fireworks when we try to unlock the not-locked
crtc lock.
An audit of all the functions called from here shows that none of them
contain locking checks, so there's also no reason to keep the locking
around just for consistency of caller contexts. Besides that I have
the rule (at least in i915) that such places where we take locks just
to simplify locking checks and not for correctness always require a
comment.
drm: convert crtc and connection_mutex to ww_mutex (v5)
v2: Don't drop the lock_init call, spotted by the 0day builder.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=83341 Cc: Rob Clark <robdclark@gmail.com> Cc: thellstrom@vmware.com Cc: maarten.lankhorst@canonical.com Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Clint Taylor [Wed, 3 Sep 2014 00:03:36 +0000 (17:03 -0700)]
drm/i915/hdmi: Enable pipe pixel replication for SD interlaced modes
Enable 2x pixel replication for modes the mode flag DBLCLK to double
horizontal timings and pixel clock across TMDS.
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Clint Taylor [Wed, 3 Sep 2014 00:03:35 +0000 (17:03 -0700)]
drm/edid: Reduce horizontal timings for pixel replicated modes
Pixel replicated modes should be non-2x horizontal timings and pixel
replicated by the HW across the HDMI cable at 2X pixel clock. Current
horizontal resolution of 1440 does not allow pixel duplication to
occur and scaling artifacts occur on the TV. HDMI certification
7-26 currently fails for all pixel replicated modes. This change will
allow HDMI certification with 480i/576i modes once pixel replication
is turned on.
Signed-off-by: Clint Taylor <clinton.a.taylor@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Chris Wilson [Tue, 2 Sep 2014 07:03:22 +0000 (08:03 +0100)]
drm: Include task->name and master status in debugfs clients info
Showing who is the current master is useful for trying to decypher
errors when trying to acquire master (e.g. a race with X taking over
from plymouth). By including the process name as well as the pid
simplifies the task of grabbing enough information remotely at the point
of error.
v2: Add the command column header and flesh out a couple of comments.
(David Herrmann)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: David Herrmann <dh.herrmann@gmail.com> Reviewed-by: David Herrmann <dh.herrmann@gmail.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull vfs fixes from Al Viro:
"double iput() on failure exit in lustre, racy removal of spliced
dentries from ->s_anon in __d_materialise_dentry() plus a bunch of
assorted RCU pathwalk fixes"
The RCU pathwalk fixes end up fixing a couple of cases where we
incorrectly dropped out of RCU walking, due to incorrect initialization
and testing of the sequence locks in some corner cases. Since dropping
out of RCU walk mode forces the slow locked accesses, those corner cases
slowed down quite dramatically.
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
be careful with nd->inode in path_init() and follow_dotdot_rcu()
don't bugger nd->seq on set_root_rcu() from follow_dotdot_rcu()
fix bogus read_seqretry() checks introduced in b37199e
move the call of __d_drop(anon) into __d_materialise_unique(dentry, anon)
[fix] lustre: d_make_root() does iput() on dentry allocation failure
vfs: avoid non-forwarding large load after small store in path lookup
The performance regression that Josef Bacik reported in the pathname
lookup (see commit 99d263d4c5b2 "vfs: fix bad hashing of dentries") made
me look at performance stability of the dcache code, just to verify that
the problem was actually fixed. That turned up a few other problems in
this area.
There are a few cases where we exit RCU lookup mode and go to the slow
serializing case when we shouldn't, Al has fixed those and they'll come
in with the next VFS pull.
But my performance verification also shows that link_path_walk() turns
out to have a very unfortunate 32-bit store of the length and hash of
the name we look up, followed by a 64-bit read of the combined hash_len
field. That screws up the processor store to load forwarding, causing
an unnecessary hickup in this critical routine.
It's caused by the ugly calling convention for the "hash_name()"
function, and easily fixed by just making hash_name() fill in the whole
'struct qstr' rather than passing it a pointer to just the hash value.
With that, the profile for this function looks much smoother.
Merge branch 'parisc-3.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc updates from Helge Deller:
"The most important patch is a new Light Weigth Syscall (LWS) for 8,
16, 32 and 64 bit atomic CAS operations which is required in order to
be able to implement the atomic gcc builtins on our platform.
Other than that, we wire up the seccomp, getrandom and memfd_create
syscalls, fixes a minor off-by-one bug and a wrong printk string"
* 'parisc-3.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Implement new LWS CAS supporting 64 bit operations.
parisc: Wire up seccomp, getrandom and memfd_create syscalls
parisc: dino: fix %d confusingly prefixed with 0x in format string
parisc: sys_hpux: NUL terminator is one past the end
Al Viro [Sun, 14 Sep 2014 01:59:43 +0000 (21:59 -0400)]
be careful with nd->inode in path_init() and follow_dotdot_rcu()
in the former we simply check if dentry is still valid after picking
its ->d_inode; in the latter we fetch ->d_inode in the same places
where we fetch dentry and its ->d_seq, under the same checks.
Cc: stable@vger.kernel.org # 2.6.38+ Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Al Viro [Sun, 14 Sep 2014 01:55:46 +0000 (21:55 -0400)]
don't bugger nd->seq on set_root_rcu() from follow_dotdot_rcu()
return the value instead, and have path_init() do the assignment. Broken by
"vfs: Fix absolute RCU path walk failures due to uninitialized seq number",
which was Cc-stable with 2.6.38+ as destination. This one should go where
it went.
To avoid dummy value returned in case when root is already set (it would do
no harm, actually, since the only caller that doesn't ignore the return value
is guaranteed to have nd->root *not* set, but it's more obvious that way),
lift the check into callers. And do the same to set_root(), to keep them
in sync.
Cc: stable@vger.kernel.org # 2.6.38+ Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Merge tag 'ntb-3.17' of git://github.com/jonmason/ntb
Pull ntb driver bugfixes from Jon Mason:
"NTB driver fixes for queue spread and buffer alignment. Also, update
to MAINTAINERS to reflect new e-mail address"
* tag 'ntb-3.17' of git://github.com/jonmason/ntb:
ntb: Add alignment check to meet hardware requirement
MAINTAINERS: update NTB info
NTB: correct the spread of queues over mw's
Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull ARM irq chip fixes from Thomas Gleixner:
"Another pile of ARM specific irq chip fixlets:
- off by one bugs in the crossbar driver
- missing annotations
- a bunch of "make it compile" updates
I pulled the lot today from Jason, but it has been in -next for at
least a week"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip: gic-v3: Declare rdist as __percpu pointer to __iomem pointer
irqchip: gic: Make gic_default_routable_irq_domain_ops static
irqchip: exynos-combiner: Fix compilation error on ARM64
irqchip: crossbar: Off by one bugs in init
irqchip: gic-v3: Tag all low level accessors __maybe_unused
irqchip: gic-v3: Only define gic_peek_irq() when building SMP
Dave Jiang [Thu, 28 Aug 2014 20:53:02 +0000 (13:53 -0700)]
ntb: Add alignment check to meet hardware requirement
The NTB translate register must have the value to be BAR size aligned.
This alignment check make sure that the DMA memory allocated has the
proper alignment. Another requirement for NTB to function properly with
memory window BAR size greater or equal to 4M is to use the CMA feature
in 3.16 kernel with the appropriate CONFIG_CMA_ALIGNMENT and
CONFIG_CMA_SIZE_MBYTES set.
Signed-off-by: Dave Jiang <dave.jiang@intel.com> Signed-off-by: Jon Mason <jdmason@kudzu.us>
Jon Mason [Thu, 19 Jun 2014 17:11:13 +0000 (10:11 -0700)]
NTB: correct the spread of queues over mw's
The detection of an uneven number of queues on the given memory windows
was not correct. The mw_num is zero based and the mod should be
division to spread them evenly over the mw's.
Merge branches 'locking-urgent-for-linus' and 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull futex and timer fixes from Thomas Gleixner:
"A oneliner bugfix for the jinxed futex code:
- Drop hash bucket lock in the error exit path. I really could slap
myself for intruducing that bug while fixing all the other horror
in that code three month ago ...
and the timer department is not too proud about the following fixes:
- Deal with a long standing rounding bug in the timeval to jiffies
conversion. It's a real issue and this fix fell through the cracks
for quite some time.
- Another round of alarmtimer fixes. Finally this code gets used
more widely and the subtle issues hidden for quite some time are
noticed and fixed. Nothing really exciting, just the itty bitty
details which bite the serious users here and there"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
futex: Unlock hb->lock in futex_wait_requeue_pi() error path
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
alarmtimer: Lock k_itimer during timer callback
alarmtimer: Do not signal SIGEV_NONE timers
alarmtimer: Return relative times in timer_gettime
jiffies: Fix timeval conversion to jiffies
Josef Bacik found a performance regression between 3.2 and 3.10 and
narrowed it down to commit bfcfaa77bdf0 ("vfs: use 'unsigned long'
accesses for dcache name comparison and hashing"). He reports:
On xfs on a fio card this goes at about 20k dir/sec with 3.2, and 12k
dir/sec with 3.10. This is because we spend waaaaay more time in
__d_lookup on 3.10 than in 3.2.
The new hashing function for strings is suboptimal for <
sizeof(unsigned long) string names (and hell even > sizeof(unsigned
long) string names that I've tested). I broke out the old hashing
function and the new one into a userspace helper to get real numbers
and this is what I'm getting:
Old hash table had 1000000 entries, 0 dupes, 0 max dupes
New hash table had 12628 entries, 987372 dupes, 900 max dupes
We had 11400 buckets with a p50 of 30 dupes, p90 of 240 dupes, p99 of 567 dupes for the new hash
My test does the hash, and then does the d_hash into a integer pointer
array the same size as the dentry hash table on my system, and then
just increments the value at the address we got to see how many
entries we overlap with.
As you can see the old hash function ended up with all 1 million
entries in their own bucket, whereas the new one they are only
distributed among ~12.5k buckets, which is why we're using so much
more CPU in __d_lookup".
The reason for this hash regression is two-fold:
- On 64-bit architectures the down-mixing of the original 64-bit
word-at-a-time hash into the final 32-bit hash value is very
simplistic and suboptimal, and just adds the two 32-bit parts
together.
In particular, because there is no bit shuffling and the mixing
boundary is also a byte boundary, similar character patterns in the
low and high word easily end up just canceling each other out.
- the old byte-at-a-time hash mixed each byte into the final hash as it
hashed the path component name, resulting in the low bits of the hash
generally being a good source of hash data. That is not true for the
word-at-a-time case, and the hash data is distributed among all the
bits.
The fix is the same in both cases: do a better job of mixing the bits up
and using as much of the hash data as possible. We already have the
"hash_32|64()" functions to do that.
Reported-by: Josef Bacik <jbacik@fb.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@infradead.org> Cc: Chris Mason <clm@fb.com> Cc: linux-fsdevel@vger.kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Make hash_64() use a 64-bit multiply when appropriate
The hash_64() function historically does the multiply by the
GOLDEN_RATIO_PRIME_64 number with explicit shifts and adds, because
unlike the 32-bit case, gcc seems unable to turn the constant multiply
into the more appropriate shift and adds when required.
However, that means that we generate those shifts and adds even when the
architecture has a fast multiplier, and could just do it better in
hardware.
Use the now-cleaned-up CONFIG_ARCH_HAS_FAST_MULTIPLIER (together with
"is it a 64-bit architecture") to decide whether to use an integer
multiply or the explicit sequence of shift/add instructions.
Make ARCH_HAS_FAST_MULTIPLIER a real config variable
It used to be an ad-hoc hack defined by the x86 version of
<asm/bitops.h> that enabled a couple of library routines to know whether
an integer multiply is faster than repeated shifts and additions.
This just makes it use the real Kconfig system instead, and makes x86
(which was the only architecture that did this) select the option.
NOTE! Even for x86, this really is kind of wrong. If we cared, we would
probably not enable this for builds optimized for netburst (P4), where
shifts-and-adds are generally faster than multiplies. This patch does
*not* change that kind of logic, though, it is purely a syntactic change
with no code changes.
This was triggered by the fact that we have other places that really
want to know "do I want to expand multiples by constants by hand or
not", particularly the hash generation code.
Merge tag 'dm-3.17-fix2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fix from Mike Snitzer:
"Fix a race in the DM cache target that caused dirty blocks to be
marked as clean. This could cause no writeback to occur or spurious
dirty block counts"
* tag 'dm-3.17-fix2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
dm cache: fix race causing dirty blocks to be marked as clean
Merge branch 'for-linus' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"A small collection of fixes for the current rc series. This contains:
- Two small blk-mq patches from Rob Elliott, cleaning up error case
at init time.
- A fix from Ming Lei, fixing SG merging for blk-mq where
QUEUE_FLAG_SG_NO_MERGE is the default.
- A dev_t minor lifetime fix from Keith, fixing an issue where a
minor might be reused before all references to it were gone.
- Fix from Alan Stern where an unbalanced queue bypass caused SCSI
some headaches when it does a series of add/del on devices without
fully registrering the queue.
- A fix from me for improving the scaling of tag depth in blk-mq if
we are short on memory"
* 'for-linus' of git://git.kernel.dk/linux-block:
blk-mq: scale depth and rq map appropriate if low on memory
Block: fix unbalanced bypass-disable in blk_register_queue
block: Fix dev_t minor allocation lifetime
blk-mq: cleanup after blk_mq_init_rq_map failures
blk-mq: pass along blk_mq_alloc_tag_set return values
blk-merge: fix blk_recount_segments
Merge tag 'stable/for-linus-3.17-b-rc4-arm-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull Xen ARM bugfix from Stefano Stabellini:
"The patches fix the "xen_add_mach_to_phys_entry: cannot add" bug that
has been affecting xen on arm and arm64 guests since 3.16. They
require a few hypervisor side changes that just went in xen-unstable.
A couple of days ago David sent out a pull request with a few other
Xen fixes (it is already in master). Sorry we didn't synchronized
better among us"
* tag 'stable/for-linus-3.17-b-rc4-arm-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/arm: remove mach_to_phys rbtree
xen/arm: reimplement xen_dma_unmap_page & friends
xen/arm: introduce XENFEAT_grant_map_identity
Dave Airlie [Fri, 12 Sep 2014 21:01:49 +0000 (07:01 +1000)]
Merge tag 'topic/drm-header-rework-2014-09-12' of git://anongit.freedesktop.org/drm-intel into drm-next
So here's the header cleanup, rebased on top of drm-next. Two new header
files are created here:
- drivers/gpu/drm/drm_internal.h for non-legacy drm.ko private
declarations.
- include/drm/drm_legacy.h for legacy interfaces used by non-kms drivers.
And of course lots fo stuff gets shuffled into the already existing
drivers/gpu/drm/drm_legacy.h for drm.ko internal stuff.
topic branch smoke-tested in drm-intel-nightly for a bit. And the 0day
tester also worked through it (and found a few places I didn't add a
static to functions).
* tag 'topic/drm-header-rework-2014-09-12' of git://anongit.freedesktop.org/drm-intel:
drm: Move DRM_MAGIC_HASH_ORDER into drm_drv.c
drm: Move drm_class to drm_internal.h
drm: Move LOCK_TEST_WITH_RETURN to <drm/drm_legacy.h>
drm: Move legacy buffer structures to <drm/drm_legacy.h>
drm: Move drm_memory.c map support declarations to <drm/drm_legacy.h>
drm: Purge ioctl forward declarations from drmP.h
drm: unexport drm_global_mutex
drm: Move piles of functions from drmP.h to drm_internal.h
drm: Move vblank related module options into drm_irq.c
drm: Drop drm_sysfs_class from drmP.h
drm: Move __drm_pci_free to drm_legacy.h
drm: Create drm legacy driver header
drm: Move drm_legacy_vma_flush into drm_legacy.h
drm: Move sg functions into drm_legacy.h
drm: Move dma functions into drm_legacy.h
projects / linux-beck.git / log