staging: ti dspbridge: Rename words with camel case.
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
dspAddr to dsp_address
dspAdr to dsp_adr
dspBaseVirt to dsp_base_virt
dwDeviceContext to device_context
dwDSPAddrOffset to dsp_addr_offset
dwDSPAddr to dsp_addr
dwErrInfo to error_info
dwGPPBaseBA to gpp_base_ba
dwMask to mask
dwTimeout to timeout
dwTimeOut to timeout
dwValue to value
entryNum to entry_num
execFile to exec_file
fFlush to flush_data
FlushMemType to flush_mem_type
========================================
staging: ti dspbridge: Rename words with camel case.
The intention of this patch is to rename the remaining variables with camel
case. Variables will be renamed avoiding camel case and Hungarian notation.
The words to be renamed in this patch are:
========================================
aAddr to addrs
aArgs to args
aSize to len
baseAddress to base_address
bDynamicLoad to dynamic_load
bForce to force
cCharSize to char_size
cContentSize to content_size
cCount to count
cDspCharSize to dsp_char_size
cIndex to index
ClkId to clock_id
cOrigin to origin
dataBasePhys to data_base_phys
dcdObjUnion to dcd_obj
deviceContext to device_ctxt
========================================
Ky Srinivasan [Thu, 20 May 2010 18:54:06 +0000 (12:54 -0600)]
Staging: hyperv: add clocksource driver
This patch is a clocksource implementation suitable for guests hosted on
HyperV. Time keeping in Linux guests hosted on HyperV is unstable. This
clocksource driver fixes the problem. This driver uses the hyperv
detection code integrated into the kernel.
Signed-off-by: K. Y. Srinivasan <ksrinivasan@novell.com> Cc: Hank Janssen <hjanssen@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Randy Dunlap [Fri, 2 Jul 2010 23:44:13 +0000 (16:44 -0700)]
Staging: solo: add delay.h header
Several solo drivers need <linux/delay.h>, so add it to the
private solo6010.h header file.
drivers/staging/solo6x10/solo6010-core.c:191: error: implicit declaration of function 'mdelay'
drivers/staging/solo6x10/solo6010-tw28.c:181: error: implicit declaration of function 'msleep_interruptible'
drivers/staging/solo6x10/solo6010-gpio.c:78: error: implicit declaration of function 'udelay'
drivers/staging/solo6x10/solo6010-v4l2-enc.c:254: error: implicit declaration of function 'mdelay'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Peter Huewe [Wed, 7 Jul 2010 02:52:16 +0000 (04:52 +0200)]
Staging: panel: Prevent double-calling of parport_release - fix oops.
This patch prevents the code from calling parport_release and
parport_unregister_device twice with the same arguments - and thus fixes an oops.
Rationale:
After the first call the parport is already released and the
handle isn't valid anymore and calling parport_release and
parport_unregister_device twice isn't a good idea.
Dave Jones [Sat, 3 Jul 2010 03:04:44 +0000 (23:04 -0400)]
Staging: rtl8192u: remove a copy of 80211.h
We had a request to enable one of the realtek network drivers in staging in Fedora.
After a quick lookover, I decided this wasn't such a great idea.
In doing so though, I noticed we have 6 copies of ieee80211.h there now,
Two drivers even have two copies of it. (Even worse, cleanups have been pointlessly
happening to both files). The patch below removes one of them, which is asides
from whitespace, identical afaics. With a change of filename to the #include,
it all still compiles for me.
A better fix would be to remove both, and have them use the core ieee80211 stuff,
but this is at least a tiny step in the right direction.
Signed-off-by: Dave Jones <davej@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Gustavo Silva [Sat, 26 Jun 2010 22:36:53 +0000 (17:36 -0500)]
Staging: otus: fix coding style issues in ioctl.c
This is a patch to the ioctl.c file that fixes up the following
issues:
ERROR: that open brace { should be on the previous line x 3
WARNING: please, no space before tabs x 1
ERROR: space required before the open parenthesis '(' x 5
WARNING: braces {} are not necessary for single statement blocks x 2
ERROR: space prohibited after that '!' (ctx:BxW) x 1
WARNING: suspect code indent for conditional statements x 2
ERROR: do not use C99 // comments x 1
WARNING: braces {} are not necessary for any arm of this statement x 4
Providing a context which can be passed around the driver, the KIM's platform
driver's struct device to be used to dev_set_drvdata and dev_get_drvdata.
The ST core's data is passed around using tty's disc_data and in other
cases the ST KIM's platform device is exposed from the board-XX.c which
adds KIM platform device whose dev is used.
Thereby remove the need for the global reference struct kim_data_s *kim_gdata;
An important TODO was to remove global references in TI-ST driver,
thereby providing a context to the driver.
This should also serve as a small step in removal of the single device
limit.
Staging: batman-adv: Add last-seen in originator table
Right now, there is no easy/intuitive way to find out whether a node
might have vanished. This commit adds the time when a node was last seen
to the originator table output, so that a common user is able to tell
whether a node might have gone without having to wait PURGE_TIMEOUT
seconds until that node gets "garbe-collected".
It also puts the the versioning information in an extra line, as
the first one of this debug output would otherwise get too long.
Signed-off-by: Linus Lüssing <linus.luessing@web.de> Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Sven Eckelmann [Tue, 6 Jul 2010 19:05:17 +0000 (21:05 +0200)]
Staging: batman-adv: Move printk to simplified macros
Each general printk which is not informative by itself for a specific
batX device were moved to pr_(info|warning|err) as it provides an easy
interface which for example resolves the problem to add the prefix
"batman-adv: " before each line.
All information which is specific to a batX device will be printed using
a bat_(info|err|warning) macro to prefix it also with "batman-adv:
batX:" in each line.
Reported-by: Joe Perches <joe@perches.com> Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Marek Lindner [Tue, 6 Jul 2010 19:05:16 +0000 (21:05 +0200)]
Staging: batman-adv: add routing debug log accessible via debugfs
All routing debug messages are saved in a ring buffer that can be
read via the debugfs file "log".
Note that CONFIG_BATMAN_ADV_DEBUG must be activated to have the
debug logs compiled in.
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Marek Lindner [Fri, 25 Jun 2010 22:28:25 +0000 (00:28 +0200)]
Staging: batman-adv: fix early debugfs deinitialization
The debugfs files are initialized at load time only but would get
deinitialized when the module changed in it deactivate (sleeping)
state. As a consequence the debugfs files are not accessible
anymore.
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Sven Eckelmann [Fri, 25 Jun 2010 22:28:24 +0000 (00:28 +0200)]
Staging: batman-adv: Add include guards to all header files
We include different header files indirectly to the same source file.
This creates weird compiler errors from time to time. Include guards
should prefend that functions/variables/... gets redefined by itself.
Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Marek Lindner [Fri, 25 Jun 2010 22:28:23 +0000 (00:28 +0200)]
Staging: batman-adv: adapting source version to revised versioning scheme
The new versioning scheme looks like this:
* the trunk will simply be named "devel" followed by a revision number
* the upcoming release branch will be "maint" followed by a revision
number
* the releases will carry their respective names (e.g. 2010.0.0)
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de> Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Simon Wunderlich [Fri, 25 Jun 2010 22:28:20 +0000 (00:28 +0200)]
Staging: batman-adv: Lower resolution for timeouts
It is enough for our timeouts to keep them in seconds instead of miliseconds.
With a too high resolution, we might even risk an integer overflow, so this
patch should make things more safe.
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de> Signed-off-by: Sven Eckelmann <sven.eckelmann@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Linus Lüssing [Fri, 25 Jun 2010 22:28:19 +0000 (00:28 +0200)]
Staging: batman-adv: Avoid rounding issues for local hna timeout
With the current default values, this patch is not critical, as
LOCAL_HNA_TIMEOUT is a multiple of 1000 anyway. However, if someone
would like to change this #define, the person could have some
unexpected rounding issues. Therefore doing the multiplication before
the division now.
Staging: dt3155: remove unused 32-bit and 8-bit global registers
All of the board 32-bit registers and 8-bit i2c registers are either read before
writing to them or they are just written to with a new value. There is no reason
to keep a 'local' copy of any of them.
As a first step to removing them, get rid of all the ones that are not used in
the driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Scott Smedley <ss@aao.gov.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Where used, dereference the global symbol dt3155_status[] as a local
pointer. This improves the readability of the code and reduces the
overall length of some of the really long lines.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Scott Smedley <ss@aao.gov.au> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Randy Dunlap [Thu, 24 Jun 2010 22:11:04 +0000 (15:11 -0700)]
Staging: solo: depends on SND
Fix 56 undefined references to snd_*() functions. First 5 are:
drivers/built-in.o: In function `solo_g723_exit':
(.text+0xa4a4aa): undefined reference to `snd_card_free'
drivers/built-in.o: In function `solo_snd_pcm_init':
solo6010-g723.c:(.text+0xa4a677): undefined reference to `snd_pcm_new'
solo6010-g723.c:(.text+0xa4a6b1): undefined reference to `snd_pcm_set_ops'
solo6010-g723.c:(.text+0xa4a74d): undefined reference to `snd_pcm_lib_preallocate_pages_for_all'
drivers/built-in.o: In function `solo_g723_init':
(.text+0xa4a7f6): undefined reference to `snd_card_create'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Ben Collins <bcollins@bluecherry.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
projects / linux-beck.git / log