Namhyung Kim [Tue, 6 Dec 2016 03:40:03 +0000 (12:40 +0900)]
perf sched timehist: Handle zero sample->tid properly
Sometimes samples have tid of 0 but non-0 pid. It ends up having a new
thread of 0 tid/pid (instead of referring idle task) since tid is used
to search matching task. But I guess it's wrong to use 0 as a tid when
pid is set. This patch uses tid only if it has a non-zero value or same
as pid (of 0).
Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20161206034010.6499-4-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The callchain_cursor__copy() function is to save current callchain
captured by a cursor. It'll be used to keep callchains when switching
to idle task for each cpu.
Signed-off-by: Namhyung Kim <namhyung@kernel.org> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20161206034010.6499-3-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Namhyung Kim [Tue, 6 Dec 2016 03:40:01 +0000 (12:40 +0900)]
perf sched: Cleanup option processing
The -D/--dump-raw-trace option is in the parent option so no need to
repeat it. Also move -f/--force option to parent as it's common to
handle data file.
Signed-off-by: Namhyung Kim <namhyung@kernel.org> Acked-by: David Ahern <dsahern@gmail.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Minchan Kim <minchan@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/20161206034010.6499-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Change the has_traces check to look for the sched_switch event. Analysis
for perf sched timehist requires at least this event.
Now when analyzing a file without sched tracepoints you get:
root@f21-vbox:/tmp$ perf sched timehist
No sched_switch events found. Have you run 'perf sched record'?
Signed-off-by: David Ahern <dsahern@gmail.com> Reported-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1480451988-43673-1-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Tue, 6 Dec 2016 13:18:50 +0000 (14:18 +0100)]
perf tools: Move perf build related variables under non fixdep leg
Because there's no need for them in fixdep build.
Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1481030331-31944-4-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Tue, 6 Dec 2016 13:18:49 +0000 (14:18 +0100)]
perf tools: Force fixdep compilation at the start of the build
The fixdep tool needs to be built before everything else, because it fixes
every object dependency file.
We handle this currently by making all objects to depend on fixdep, which is
error prone and is easily forgotten when new object is added.
Instead of this, this patch force fixdep tool to be built as the first target
in the separate make session. This way we don't need to handle extra fixdep
dependencies and we are certain there's no fixdep race with any parallel make
job.
Auto-detecting system features:
... dwarf: [ on ]
... dwarf_getlocations: [ on ]
... glibc: [ on ]
... gtk2: [ on ]
... libaudit: [ on ]
... libbfd: [ on ]
... libelf: [ on ]
... libnuma: [ on ]
... numa_num_possible_cpus: [ on ]
... libperl: [ on ]
... libpython: [ on ]
... libslang: [ on ]
... libcrypto: [ on ]
... libunwind: [ on ]
... libdw-dwarf-unwind: [ on ]
... zlib: [ on ]
... lzma: [ on ]
... get_cpuid: [ on ]
... bpf: [ on ]
GEN /tmp/build/perf/common-cmds.h
HOSTCC /tmp/build/perf/fixdep.o
HOSTLD /tmp/build/perf/fixdep-in.o
LINK /tmp/build/perf/fixdep
MKDIR /tmp/build/perf/pmu-events/
HOSTCC /tmp/build/perf/pmu-events/json.o
MKDIR /tmp/build/perf/pmu-events/
HOSTCC /tmp/build/perf/pmu-events/jsmn.o
HOSTCC /tmp/build/perf/pmu-events/jevents.o
HOSTLD /tmp/build/perf/pmu-events/jevents-in.o
PERF_VERSION = 4.9.rc8.g868cd5
CC /tmp/build/perf/perf-read-vdso32
<SNIP>
Auto-detecting system features:
... dwarf: [ on ]
... dwarf_getlocations: [ on ]
... glibc: [ on ]
... gtk2: [ on ]
... libaudit: [ on ]
... libbfd: [ on ]
... libelf: [ on ]
... libnuma: [ on ]
... numa_num_possible_cpus: [ on ]
... libperl: [ on ]
... libpython: [ on ]
... libslang: [ on ]
... libcrypto: [ on ]
... libunwind: [ on ]
... libdw-dwarf-unwind: [ on ]
... zlib: [ on ]
... lzma: [ on ]
... get_cpuid: [ on ]
... bpf: [ on ]
GEN /tmp/build/perf/common-cmds.h
MKDIR /tmp/build/perf/fd/
CC /tmp/build/perf/fd/array.o
LD /tmp/build/perf/fd/libapi-in.o
MKDIR /tmp/build/perf/fs/
CC /tmp/build/perf/event-parse.o
CC /tmp/build/perf/fs/fs.o
PERF_VERSION = 4.9.rc8.g57a92f
CC /tmp/build/perf/event-plugin.o
MKDIR /tmp/build/perf/fs/
CC /tmp/build/perf/fs/tracing_path.o
<SNIP>
Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1481030331-31944-3-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Tue, 6 Dec 2016 13:18:48 +0000 (14:18 +0100)]
perf tools: Move PERF-VERSION-FILE target into rules area
An upcoming fixdep fix needs all targets at the same area, so they'll
fit under a signal condition block.
Moving PERF-VERSION-FILE target into rules section.
Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1481030331-31944-2-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Wang Nan [Tue, 6 Dec 2016 07:22:30 +0000 (07:22 +0000)]
perf build: Check LLVM version in feature check
Cancel builtin llvm and clang support when LLVM version is less than
3.9.0: following commits uses newer API.
Since Clang/LLVM's API is not guaranteed to be stable, add a
test-llvm-version.cpp feature checker, issue warning if LLVM found in
compiling environment is not tested yet.
$ make -k LIBCLANGLLVM=1 O=/tmp/build/perf -C tools/perf install-bin
make: Entering directory '/home/acme/git/linux/tools/perf'
BUILD: Doing 'make -j4' parallel build
Warning: tools/include/uapi/linux/bpf.h differs from kernel
Warning: tools/arch/arm/include/uapi/asm/kvm.h differs from kernel
INSTALL GTK UI
LINK /tmp/build/perf/perf
/tmp/build/perf/libperf.a(libperf-in.o): In function `perf::createCompilerInvocation(llvm::SmallVector<char const*, 16u>, llvm::StringRef&, clang::DiagnosticsEngine&)':
/home/acme/git/linux/tools/perf/util/c++/clang.cpp:56: undefined reference to `clang::tooling::newInvocation(clang::DiagnosticsEngine*, llvm::SmallVector<char const*, 16u> const&)'
/tmp/build/perf/libperf.a(libperf-in.o): In function `perf::getModuleFromSource(llvm::SmallVector<char const*, 16u>, llvm::StringRef, llvm::IntrusiveRefCntPtr<clang::vfs::FileSystem>)':
/home/acme/git/linux/tools/perf/util/c++/clang.cpp:68: undefined reference to `clang::CompilerInstance::CompilerInstance(std::shared_ptr<clang::PCHContainerOperations>, bool)'
/home/acme/git/linux/tools/perf/util/c++/clang.cpp:69: undefined reference to `clang::CompilerInstance::createDiagnostics(clang::DiagnosticConsumer*, bool)'
<SNIP>
After:
Makefile.config:807: No suitable libLLVM found, disabling builtin clang and llvm support. Please install llvm-dev(el) (>= 3.9.0)
Updating the environment to a locally built LLVM 4.0 + clang 3.9 (forgot
to git pull, duh) combo, all works as expected, it is properly detected
and built into the resulting perf binary.
Signed-off-by: Wang Nan <wangnan0@huawei.com> Reported-and-Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Joe Stringer <joe@ovn.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/20161206072230.7651-1-wangnan0@huawei.com
[ Change the warning message a bit (add 'suitable' and 'builtin'), clarifying it, see committer notes above ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Ingo Molnar [Tue, 6 Dec 2016 08:14:56 +0000 (09:14 +0100)]
Merge tag 'perf-core-for-mingo-20161205' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
Fixes:
- Do not show a bogus target address in 'perf annotate' for targetless powerpc
jump instructions such as 'bctr' (Ravi Bangoria)
- Fix tools/build race conditions with the fixdep utility (Jiri Olsa)
- Fix building objtool with clang (Peter Foley)
Infrastructure changes:
- Support linking perf with clang and LLVM libraries, initially statically, but
this limitation will be lifted and shared libraries, when available, will
be preferred to the static build, that should, as with other features, be
enabled explicitly (Wang Nan)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ravi Bangoria [Mon, 5 Dec 2016 15:56:45 +0000 (21:26 +0530)]
perf annotate: Show raw form for jump instruction with indirect target
For jump instructions that does not include target address as direct operand,
show the original disassembled line for them. This is needed for certain
powerpc jump instructions that use target address in a register (such as bctr,
btar, ...).
This, in turn, uncovers another problem with jumps without operands, the
ENTER/-> operation, to jump to the target, still continues using the bogus
target :-)
BTW, this was the file used for the above tests:
[acme@jouet ravi_bangoria]$ perf report --header-only -i perf.data.f22vm.powerdev
# ========
# captured on: Thu Nov 24 12:40:38 2016
# hostname : pdev-f22-qemu
# os release : 4.4.10-200.fc22.ppc64
# perf version : 4.9.rc1.g6298ce
# arch : ppc64
# nrcpus online : 48
# nrcpus avail : 48
# cpudesc : POWER7 (architected), altivec supported
# cpuid : 74,513
# total memory : 4158976 kB
# cmdline : /home/ravi/Workspace/linux/tools/perf/perf record -a
# event : name = cycles:ppp, , size = 112, { sample_period, sample_freq } = 4000, sample_type = IP|TID|TIME|CPU|PERIOD, disabled = 1, inherit = 1, mmap = 1, c
# HEADER_CPU_TOPOLOGY info available, use -I to display
# HEADER_NUMA_TOPOLOGY info available, use -I to display
# pmu mappings: cpu = 4, software = 1, tracepoint = 2, breakpoint = 5
# missing features: HEADER_TRACING_DATA HEADER_BRANCH_STACK HEADER_GROUP_DESC HEADER_AUXTRACE HEADER_STAT HEADER_CACHE
# ========
#
[acme@jouet ravi_bangoria]$
Suggested-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Chris Riyder <chris.ryder@arm.com> Cc: Kim Phillips <kim.phillips@arm.com> Cc: Markus Trippelsdorf <markus@trippelsdorf.de> Cc: Masami Hiramatsu <mhiramat@kernel.org> Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Taeung Song <treeze.taeung@gmail.com> Cc: linuxppc-dev@lists.ozlabs.org Link: http://lkml.kernel.org/r/1480953407-7605-1-git-send-email-ravi.bangoria@linux.vnet.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sun, 4 Dec 2016 20:42:57 +0000 (21:42 +0100)]
perf tools: Add non config targets
Adding some missing non config targets that were for some reason
omitted.
Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1480884178-8072-7-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sun, 4 Dec 2016 20:42:58 +0000 (21:42 +0100)]
perf tools: Cleanup build directory before each test
Cleanup the fixdep tool before every test.
Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1480884178-8072-8-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sun, 4 Dec 2016 20:42:55 +0000 (21:42 +0100)]
perf tools: Move python/perf.so target into rules area
Following fixdep fix needs all targets at the same area, so they'll fit
under signal condition block.
Moving python/perf.so target into rules section and intentionally
removing the perl script related comment.
Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1480884178-8072-5-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sun, 4 Dec 2016 20:42:54 +0000 (21:42 +0100)]
perf tools: Move install-gtk target into rules area
The upcoming fixdep fix needs all targets at the same area, so they'll
fit under a signal condition block.
Move install-gtk target into the rules section.
Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1480884178-8072-4-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Jiri Olsa [Sun, 4 Dec 2016 20:42:53 +0000 (21:42 +0100)]
tools build: Move tabs to spaces where suitable
We've been hit several times by a Makefile bug where line indented by
tab was falsely considered as target command.
We prevent this by always using space indentation for everything except
for the target commands.
Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1480884178-8072-3-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1480884178-8072-2-git-send-email-jolsa@kernel.org Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Wang Nan [Sat, 26 Nov 2016 07:03:39 +0000 (07:03 +0000)]
perf clang: Compile BPF script using builtin clang support
After this patch, perf utilizes builtin clang support to build BPF
script, no longer depend on external clang, but fallbacking to it
if for some reason the builtin compiling framework fails.
Test:
$ type clang
-bash: type: clang: not found
$ cat ~/.perfconfig
$ echo '#define LINUX_VERSION_CODE 0x040700' > ./test.c
$ cat ./tools/perf/tests/bpf-script-example.c >> ./test.c
$ ./perf record -v --dry-run -e ./test.c 2>&1 | grep builtin
bpf: successfull builtin compilation
$
Can't pass cflags so unable to include kernel headers now. Will be fixed
by following commits.
Committer notes:
Make sure '-v' comes before the '-e ./test.c' in the command line otherwise the
'verbose' variable will not be set when the bpf event is parsed and thus the
pr_debug indicating a 'successfull builtin compilation' will not be output, as
the debug level (1) will be less than what 'verbose' has at that point (0).
Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Joe Stringer <joe@ovn.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/20161126070354.141764-16-wangnan0@huawei.com
[ Spell check/reflow successfull pr_debug string ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Wang Nan [Sat, 26 Nov 2016 07:03:38 +0000 (07:03 +0000)]
perf clang: Support compile IR to BPF object and add testcase
getBPFObjectFromModule() is introduced to compile LLVM IR(Module)
to BPF object. Add new testcase for it.
Test result:
$ ./buildperf/perf test -v clang
51: builtin clang support :
51.1: builtin clang compile C source to IR :
--- start ---
test child forked, pid 21822
test child finished with 0
---- end ----
builtin clang support subtest 0: Ok
51.2: builtin clang compile C source to ELF object :
--- start ---
test child forked, pid 21823
test child finished with 0
---- end ----
builtin clang support subtest 1: Ok
Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Joe Stringer <joe@ovn.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/20161126070354.141764-15-wangnan0@huawei.com
[ Remove redundant "Test" from entry descriptions ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Wang Nan [Sat, 26 Nov 2016 07:03:37 +0000 (07:03 +0000)]
perf clang: Update test case to use real BPF script
Allow C++ code to use util.h and tests/llvm.h. Let 'perf test' compile a
real BPF script.
Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Joe Stringer <joe@ovn.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/20161126070354.141764-14-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Wang Nan [Sat, 26 Nov 2016 07:03:36 +0000 (07:03 +0000)]
perf clang: Allow passing CFLAGS to builtin clang
Improve getModuleFromSource() API to accept a cflags list. This feature
will be used to pass LINUX_VERSION_CODE and -I flags.
Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Joe Stringer <joe@ovn.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/20161126070354.141764-13-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Wang Nan [Sat, 26 Nov 2016 07:03:35 +0000 (07:03 +0000)]
perf clang: Use real file system for #include
Utilize clang's OverlayFileSystem facility, allow CompilerInstance to
access real file system.
With this patch the '#include' directive can be used.
Add a new getModuleFromSource for real file.
Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Joe Stringer <joe@ovn.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/20161126070354.141764-12-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Wang Nan [Sat, 26 Nov 2016 07:03:34 +0000 (07:03 +0000)]
perf clang: Add builtin clang support ant test case
Add basic clang support in clang.cpp and test__clang() testcase. The
first testcase checks if builtin clang is able to generate LLVM IR.
tests/clang.c is a proxy. Real testcase resides in
utils/c++/clang-test.cpp in c++ and exports C interface to perf test
subsystem.
Test result:
$ perf test -v clang
51: builtin clang support :
51.1: Test builtin clang compile C source to IR :
--- start ---
test child forked, pid 13215
test child finished with 0
---- end ----
Test builtin clang support subtest 0: Ok
Committer note:
Make sure you've enabled CLANG and LLVM builtin support by setting
the LIBCLANGLLVM variable on the make command line, e.g.:
make LIBCLANGLLVM=1 O=/tmp/build/perf -C tools/perf install-bin
Otherwise you'll get this when trying to do the 'perf test' call above:
# perf test clang
51: builtin clang support : Skip (not compiled in)
#
Signed-off-by: Wang Nan <wangnan0@huawei.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Joe Stringer <joe@ovn.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/20161126070354.141764-11-wangnan0@huawei.com
[ Removed "Test" from descriptions, redundant and already removed from all the other entries ] Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Wang Nan [Sat, 26 Nov 2016 07:03:33 +0000 (07:03 +0000)]
perf build: Add clang and llvm compile and linking support
Add necessary c++ flags and link libraries to support builtin clang and
LLVM. Add all llvm and clang libraries, so don't need to worry about
clang changes its libraries setting. However, linking perf would take
much longer than usual.
Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Joe Stringer <joe@ovn.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/20161126070354.141764-10-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Wang Nan [Sat, 26 Nov 2016 07:03:32 +0000 (07:03 +0000)]
tools build: Add feature detection for clang
Check if basic clang compiling environment is ready.
Doesn't like 'llvm-config --libs' which can returns llvm libraries in right
order and duplicates some libraries if necessary, there's no correspondence for
clang libraries (-lclangxxx). to avoid extra complexity and to avoid new clang
breaking libraries ordering, use --start-group and --end-group.
In this test case, manually identify required clang libs and hope it to be
stable. Putting all clang libraries here is possible (use make's wildcard), but
then feature checking becomes very slow.
Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Joe Stringer <joe@ovn.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/20161126070354.141764-9-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Wang Nan [Sat, 26 Nov 2016 07:03:31 +0000 (07:03 +0000)]
tools build: Add feature detection for LLVM
Check if basic LLVM compiling environment is ready.
Use llvm-config to detect include and library directories. Avoid using
'llvm-config --cxxflags' because its result contain some unwanted flags
like --sysroot (if LLVM is built by yocto).
Use '?=' to set LLVM_CONFIG, so explicitly passing LLVM_CONFIG to make
would override it.
Use 'llvm-config --libs BPF' to check if BPF backend is compiled in.
Since now BPF bytecode is the only required backend, no need to waste
time linking llvm and clang if BPF backend is missing. This also
introduce an implicit requirement that LLVM should be new enough. Old
LLVM doesn't support BPF backend.
Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Joe Stringer <joe@ovn.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/20161126070354.141764-8-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Wang Nan [Sat, 26 Nov 2016 07:03:30 +0000 (07:03 +0000)]
perf llvm: Extract helpers in llvm-utils.c
The following commits will use builtin clang to compile BPF scripts.
llvm__get_kbuild_opts() and llvm__get_nr_cpus() are extracted to help
building '-DKERNEL_VERSION_CODE' and '-D__NR_CPUS__' macros.
Doing object dumping in bpf loader, so further builtin clang compiling
needn't consider it.
Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Joe Stringer <joe@ovn.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/20161126070354.141764-7-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Wang Nan [Sat, 26 Nov 2016 07:03:29 +0000 (07:03 +0000)]
perf tools: Pass context to perf hook functions
Pass a pointer to perf hook functions so they receive context
information during setup.
Signed-off-by: Wang Nan <wangnan0@huawei.com> Cc: Alexei Starovoitov <ast@fb.com> Cc: He Kuang <hekuang@huawei.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Joe Stringer <joe@ovn.org> Cc: Zefan Li <lizefan@huawei.com> Cc: pi3orama@163.com Link: http://lkml.kernel.org/r/20161126070354.141764-6-wangnan0@huawei.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Peter Foley [Mon, 28 Nov 2016 02:43:46 +0000 (21:43 -0500)]
tools build: Fix objtool build with clang
Clang doesn't support multiple arguments being passed to -Wp, so split
them.
Fixes this error:
HOSTCC tools/objtool/fixdep.o
cat: tools/objtool/.fixdep.o.d: No such file or directory
Signed-off-by: Peter Foley <pefoley2@pefoley.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/20161128024346.17371-1-pefoley2@pefoley.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make the fixdep code smart enough to skip all the possible targets.
Signed-off-by: Jiri Olsa <jolsa@kernel.org> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Peter Foley <pefoley2@pefoley.com> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/r/20161201130025.GA16430@krava Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Linus Torvalds [Mon, 5 Dec 2016 18:30:12 +0000 (10:30 -0800)]
Merge tag 'powerpc-4.9-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Four fixes, the first for code we merged this cycle and three that are
also going to stable:
- On 64-bit Book3E we were not placing the .text section where we
said we would in the asm.
- We broke building the boot wrapper on some 32-bit toolchains.
- Lazy icache flushing was broken on pre-POWER5 machines.
- One of the error paths in our EEH code would lead to a deadlock.
Thanks to: Andrew Donnellan, Ben Hutchings, Benjamin Herrenschmidt,
Nicholas Piggin"
* tag 'powerpc-4.9-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/64: Fix placement of .text to be immediately following .head.text
powerpc/eeh: Fix deadlock when PE frozen state can't be cleared
powerpc/mm: Fix lazy icache flush on pre-POWER5
powerpc/boot: Fix build failure in 32-bit boot wrapper
Linus Torvalds [Sun, 4 Dec 2016 00:40:21 +0000 (16:40 -0800)]
Merge tag 'drm-fixes-for-v4.9-rc8' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"A pretty small pull request: a couple of AMD powerxpress regression
fixes and a power management fix, a couple of i915 fixes and one hdlcd
fix, along with one core don't oops because of incorrect API usage fix"
* tag 'drm-fixes-for-v4.9-rc8' of git://people.freedesktop.org/~airlied/linux:
drm/i915: drop the struct_mutex when wedged or trying to reset
drm/i915: Don't touch NULL sg on i915_gem_object_get_pages_gtt() error
drm: Don't call drm_for_each_crtc with a non-KMS driver
drm/radeon: fix check for port PM availability
drm/amdgpu: fix check for port PM availability
drm/amd/powerplay: initialize the soft_regs offset in struct smu7_hwmgr
drm: hdlcd: Fix cleanup order
Dave Airlie [Sat, 3 Dec 2016 20:31:26 +0000 (06:31 +1000)]
Merge tag 'drm-intel-fixes-2016-12-01' of git://anongit.freedesktop.org/git/drm-intel into drm-fixes
2 intel fixes.
* tag 'drm-intel-fixes-2016-12-01' of git://anongit.freedesktop.org/git/drm-intel:
drm/i915: drop the struct_mutex when wedged or trying to reset
drm/i915: Don't touch NULL sg on i915_gem_object_get_pages_gtt() error
Linus Torvalds [Sat, 3 Dec 2016 02:48:11 +0000 (18:48 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge more fixes from Andrew Morton:
"2 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm, vmscan: add cond_resched() into shrink_node_memcg()
mm: workingset: fix NULL ptr in count_shadow_nodes
Michal Hocko [Sat, 3 Dec 2016 01:26:48 +0000 (17:26 -0800)]
mm, vmscan: add cond_resched() into shrink_node_memcg()
Boris Zhmurov has reported RCU stalls during the kswapd reclaim:
INFO: rcu_sched detected stalls on CPUs/tasks:
23-...: (22 ticks this GP) idle=92f/140000000000000/0 softirq=2638404/2638404 fqs=23
(detected by 4, t=6389 jiffies, g=786259, c=786258, q=42115)
Task dump for CPU 23:
kswapd1 R running task 0 148 2 0x00000008
Call Trace:
shrink_node+0xd2/0x2f0
kswapd+0x2cb/0x6a0
mem_cgroup_shrink_node+0x160/0x160
kthread+0xbd/0xe0
__switch_to+0x1fa/0x5c0
ret_from_fork+0x1f/0x40
kthread_create_on_node+0x180/0x180
a closer code inspection has shown that we might indeed miss all the
scheduling points in the reclaim path if no pages can be isolated from
the LRU list. This is a pathological case but other reports from Donald
Buczek have shown that we might indeed hit such a path:
this is minute long snapshot which didn't take a single page from the
LRU. It is not entirely clear why only 1303 pages have been scanned
during that time (maybe there was a heavy IRQ activity interfering).
In any case it looks like we can really hit long periods without
scheduling on non preemptive kernels so an explicit cond_resched() in
shrink_node_memcg which is independent on the reclaim operation is due.
Link: http://lkml.kernel.org/r/20161202095841.16648-1-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Boris Zhmurov <bb@kernelpanic.ru> Tested-by: Boris Zhmurov <bb@kernelpanic.ru> Reported-by: Donald Buczek <buczek@molgen.mpg.de> Reported-by: "Christopher S. Aker" <caker@theshore.net> Reported-by: Paul Menzel <pmenzel@molgen.mpg.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Michal Hocko [Sat, 3 Dec 2016 01:26:45 +0000 (17:26 -0800)]
mm: workingset: fix NULL ptr in count_shadow_nodes
Commit 0a6b76dd23fa ("mm: workingset: make shadow node shrinker memcg
aware") has made the workingset shadow nodes shrinker memcg aware. The
implementation is not correct though because memcg_kmem_enabled() might
become true while we are doing a global reclaim when the sc->memcg might
be NULL which is exactly what Marek has seen:
This patch fixes the issue by checking sc->memcg rather than
memcg_kmem_enabled() which is sufficient because shrink_slab makes sure
that only memcg aware shrinkers will get non-NULL memcgs and only if
memcg_kmem_enabled is true.
Fixes: 0a6b76dd23fa ("mm: workingset: make shadow node shrinker memcg aware") Link: http://lkml.kernel.org/r/20161201132156.21450-1-mhocko@kernel.org Signed-off-by: Michal Hocko <mhocko@suse.com> Reported-by: Marek Marczykowski-Górecki <marmarek@mimuw.edu.pl> Tested-by: Marek Marczykowski-Górecki <marmarek@mimuw.edu.pl> Acked-by: Vladimir Davydov <vdavydov.dev@gmail.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Acked-by: Balbir Singh <bsingharora@gmail.com> Cc: <stable@vger.kernel.org> [4.6+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Nicolas Pitre [Fri, 2 Dec 2016 20:11:50 +0000 (15:11 -0500)]
kbuild: fix building bzImage with CONFIG_TRIM_UNUSED_KSYMS enabled
When building a specific target such as bzImage, modules aren't normally
built. However if CONFIG_TRIM_UNUSED_KSYMS is enabled, no built modules
means none of the exported symbols are used and therefore they will all
be trimmed away from the final kernel. A subsequent "make modules" will
fail because modpost cannot find the needed symbols for those modules in
the kernel binary.
Let's make sure modules are also built whenever CONFIG_TRIM_UNUSED_KSYMS
is enabled and that the kernel binary is properly rebuilt accordingly.
Signed-off-by: Nicolas Pitre <nico@linaro.org> Tested-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Fri, 2 Dec 2016 21:34:37 +0000 (13:34 -0800)]
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"This should be the last set of bugfixes for arm-soc in v4.9. None of
these are critical regressions, but it would be nice to still get them
merged.
- On the Juno platform, the idle latency was described wrong, leading
to suboptimal cpuidle tuning.
- Also on the same platform, PCI I/O space was set up incorrectly and
could not work.
- On the sti platform, a syntactically incorrect DT entry caused
warnings.
- The newly added 'gr8' platform has somewhat confusing file names,
which we rename for consistency"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
arm64: dts: juno: fix cluster sleep state entry latency on all SoC versions
arm64: dts: juno: Correct PCI IO window
ARM: dts: STiH407-family: fix i2c nodes
ARM: gr8: Rename the DTSI and relevant DTS
1) Lots more phydev and probe error path leaks in various drivers by
Johan Hovold.
2) Fix race in packet_set_ring(), from Philip Pettersson.
3) Use after free in dccp_invalid_packet(), from Eric Dumazet.
4) Signnedness overflow in SO_{SND,RCV}BUFFORCE, also from Eric
Dumazet.
5) When tunneling between ipv4 and ipv6 we can be left with the wrong
skb->protocol value as we enter the IPSEC engine and this causes all
kinds of problems. Set it before the output path does any
dst_output() calls, from Eli Cooper.
6) bcmgenet uses wrong device struct pointer in DMA API calls, fix from
Florian Fainelli.
7) Various netfilter nat bug fixes from FLorian Westphal.
8) Fix memory leak in ipvlan_link_new(), from Gao Feng.
9) Locking fixes, particularly wrt. socket lookups, in l2tp from
Guillaume Nault.
10) Avoid invoking rhash teardowns in atomic context by moving netlink
cb->done() dump completion from a worker thread. Fix from Herbert
Xu.
11) Buffer refcount problems in tun and macvtap on errors, from Jason
Wang.
12) We don't set Kconfig symbol DEFAULT_TCP_CONG properly when the user
selects BBR. Fix from Julian Wollrath.
13) Fix deadlock in transmit path on altera TSE driver, from Lino
Sanfilippo.
14) Fix unbalanced reference counting in dsa_switch_tree, from Nikita
Yushchenko.
15) tc_tunnel_key needs to be properly exported to userspace via uapi,
fix from Roi Dayan.
16) rds_tcp_init_net() doesn't unregister notifier in error path, fix
from Sowmini Varadhan.
17) Stale packet header pointer access after pskb_expand_head() in
genenve driver, fix from Sabrina Dubroca.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (103 commits)
net: avoid signed overflows for SO_{SND|RCV}BUFFORCE
geneve: avoid use-after-free of skb->data
tipc: check minimum bearer MTU
net: renesas: ravb: unintialized return value
sh_eth: remove unchecked interrupts for RZ/A1
net: bcmgenet: Utilize correct struct device for all DMA operations
NET: usb: qmi_wwan: add support for Telit LE922A PID 0x1040
cdc_ether: Fix handling connection notification
ip6_offload: check segs for NULL in ipv6_gso_segment.
RDS: TCP: unregister_netdevice_notifier() in error path of rds_tcp_init_net
Revert: "ip6_tunnel: Update skb->protocol to ETH_P_IPV6 in ip6_tnl_xmit()"
ipv6: Set skb->protocol properly for local output
ipv4: Set skb->protocol properly for local output
packet: fix race condition in packet_set_ring
net: ethernet: altera: TSE: do not use tx queue lock in tx completion handler
net: ethernet: altera: TSE: Remove unneeded dma sync for tx buffers
net: ethernet: stmmac: fix of-node and fixed-link-phydev leaks
net: ethernet: stmmac: platform: fix outdated function header
net: ethernet: stmmac: dwmac-meson8b: fix probe error path
net: ethernet: stmmac: dwmac-generic: fix probe error path
...
Eric Dumazet [Fri, 2 Dec 2016 17:44:53 +0000 (09:44 -0800)]
net: avoid signed overflows for SO_{SND|RCV}BUFFORCE
CAP_NET_ADMIN users should not be allowed to set negative
sk_sndbuf or sk_rcvbuf values, as it can lead to various memory
corruptions, crashes, OOM...
Note that before commit 82981930125a ("net: cleanups in
sock_setsockopt()"), the bug was even more serious, since SO_SNDBUF
and SO_RCVBUF were vulnerable.
This needs to be backported to all known linux kernels.
Again, many thanks to syzkaller team for discovering this gem.
Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: Andrey Konovalov <andreyknvl@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Sabrina Dubroca [Fri, 2 Dec 2016 15:49:29 +0000 (16:49 +0100)]
geneve: avoid use-after-free of skb->data
geneve{,6}_build_skb can end up doing a pskb_expand_head(), which
makes the ip_hdr(skb) reference we stashed earlier stale. Since it's
only needed as an argument to ip_tunnel_ecn_encap(), move this
directly in the function call.
Fixes: 08399efc6319 ("geneve: ensure ECN info is handled properly in all tx/rx paths") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Reviewed-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Michal Kubeček [Fri, 2 Dec 2016 08:33:41 +0000 (09:33 +0100)]
tipc: check minimum bearer MTU
Qian Zhang (张谦) reported a potential socket buffer overflow in
tipc_msg_build() which is also known as CVE-2016-8632: due to
insufficient checks, a buffer overflow can occur if MTU is too short for
even tipc headers. As anyone can set device MTU in a user/net namespace,
this issue can be abused by a regular user.
As agreed in the discussion on Ben Hutchings' original patch, we should
check the MTU at the moment a bearer is attached rather than for each
processed packet. We also need to repeat the check when bearer MTU is
adjusted to new device MTU. UDP case also needs a check to avoid
overflow when calculating bearer MTU.
Fixes: b97bf3fd8f6a ("[TIPC] Initial merge") Signed-off-by: Michal Kubecek <mkubecek@suse.cz> Reported-by: Qian Zhang (张谦) <zhangqian-c@360.cn> Acked-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Dan Carpenter [Thu, 1 Dec 2016 20:57:44 +0000 (23:57 +0300)]
net: renesas: ravb: unintialized return value
We want to set the other "err" variable here so that we can return it
later. My version of GCC misses this issue but I caught it with a
static checker.
Fixes: 9f70eb339f52 ("net: ethernet: renesas: ravb: fix fixed-link phydev leaks") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Reviewed-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Chris Brandt [Thu, 1 Dec 2016 18:32:14 +0000 (13:32 -0500)]
sh_eth: remove unchecked interrupts for RZ/A1
When streaming a lot of data and the RZ/A1 can't keep up, some status bits
will get set that are not being checked or cleared which cause the
following messages and the Ethernet driver to stop working. This
patch fixes that issue.
irq 21: nobody cared (try booting with the "irqpoll" option)
handlers:
[<c036b71c>] sh_eth_interrupt
Disabling IRQ #21
Fixes: db893473d313a4ad ("sh_eth: Add support for r7s72100") Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net: bcmgenet: Utilize correct struct device for all DMA operations
__bcmgenet_tx_reclaim() and bcmgenet_free_rx_buffers() are not using the
same struct device during unmap that was used for the map operation,
which makes DMA-API debugging warn about it. Fix this by always using
&priv->pdev->dev throughout the driver, using an identical device
reference for all map/unmap calls.
Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file") Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 2 Dec 2016 18:48:50 +0000 (10:48 -0800)]
Fix up a couple of field names in the CREDITS file
Ozgur Karatas reported that the very first entry in the CREDITS file had
the wrong tag for name (M: instead of N: - it happened when moving the
entry from the MAINTAINERS file, where 'M:' stands for "Maintainer").
And when I went looking, I found a couple of other cases of wrong
tagging too.
Commit bfe9b9d2df66 ("cdc_ether: Improve ZTE MF823/831/910 handling")
introduced a work-around in usbnet_cdc_status() for devices that exported
cdc carrier on twice on connect. Before the commit, this behavior caused
the link state to be incorrect. It was assumed that all CDC Ethernet
devices would either export this behavior, or send one off and then one on
notification (which seems to be the default behavior).
Unfortunately, it turns out multiple devices sends a connection
notification multiple times per second (via an interrupt), even when
connection state does not change. This has been observed with several
different USB LAN dongles (at least), for example 13b1:0041 (Linksys).
After bfe9b9d2df66, the link state has been set as down and then up for
each notification. This has caused a flood of Netlink NEWLINK messages and
syslog to be flooded with messages similar to:
cdc_ether 2-1:2.0 eth1: kevent 12 may have been dropped
This commit fixes the behavior by reverting usbnet_cdc_status() to how it
was before bfe9b9d2df66. The work-around has been moved to a separate
status-function which is only called when a known, affect device is
detected.
v1->v2:
* Do not open-code netif_carrier_ok() (thanks Henning Schild).
* Call netif_carrier_off() instead of usb_link_change(). This prevents
calling schedule_work() twice without giving the work queue a chance to be
processed (thanks Bjørn Mork).
Fixes: bfe9b9d2df66 ("cdc_ether: Improve ZTE MF823/831/910 handling") Reported-by: Henning Schild <henning.schild@siemens.com> Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Artem Savkov [Thu, 1 Dec 2016 13:06:04 +0000 (14:06 +0100)]
ip6_offload: check segs for NULL in ipv6_gso_segment.
segs needs to be checked for being NULL in ipv6_gso_segment() before calling
skb_shinfo(segs), otherwise kernel can run into a NULL-pointer dereference:
RDS: TCP: unregister_netdevice_notifier() in error path of rds_tcp_init_net
If some error is encountered in rds_tcp_init_net, make sure to
unregister_netdevice_notifier(), else we could trigger a panic
later on, when the modprobe from a netns fails.
Signed-off-by: Sowmini Varadhan <sowmini.varadhan@oracle.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
where skb_gso_segment() relies on skb->protocol to function properly.
This patch sets skb->protocol to ETH_P_IPV6 before dst_output() is called,
fixing a bug where GSO packets sent through an ipip6 tunnel are dropped
when xfrm is involved.
Cc: stable@vger.kernel.org Signed-off-by: Eli Cooper <elicooper@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
where skb_gso_segment() relies on skb->protocol to function properly.
This patch sets skb->protocol to ETH_P_IP before dst_output() is called,
fixing a bug where GSO packets sent through a sit tunnel are dropped
when xfrm is involved.
Cc: stable@vger.kernel.org Signed-off-by: Eli Cooper <elicooper@gmx.com> Signed-off-by: David S. Miller <davem@davemloft.net>
When packet_set_ring creates a ring buffer it will initialize a
struct timer_list if the packet version is TPACKET_V3. This value
can then be raced by a different thread calling setsockopt to
set the version to TPACKET_V1 before packet_set_ring has finished.
This leads to a use-after-free on a function pointer in the
struct timer_list when the socket is closed as the previously
initialized timer will not be deleted.
The bug is fixed by taking lock_sock(sk) in packet_setsockopt when
changing the packet version while also taking the lock at the start
of packet_set_ring.
Fixes: f6fb8f100b80 ("af-packet: TPACKET_V3 flexible buffer implementation.") Signed-off-by: Philip Pettersson <philip.pettersson@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Fri, 2 Dec 2016 17:15:26 +0000 (09:15 -0800)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Radim Krčmář:
"All architectures avoid memory corruption in an error path. ARM
prevents bogus acknowledgement of interrupts"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: use after free in kvm_ioctl_create_device()
KVM: arm/arm64: vgic: Don't notify EOI for non-SPIs
Linus Torvalds [Fri, 2 Dec 2016 17:12:44 +0000 (09:12 -0800)]
Merge branch 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fix from Wolfram Sang:
"Here is the revert for the regression of the i2c-octeon driver I
mentioned last time. I wished for a bit more feedback, but all people
working actively on it are in need of this patch, so here it goes"
Lino Sanfilippo [Wed, 30 Nov 2016 22:48:32 +0000 (23:48 +0100)]
net: ethernet: altera: TSE: do not use tx queue lock in tx completion handler
The driver already uses its private lock for synchronization between xmit
and xmit completion handler making the additional use of the xmit_lock
unnecessary.
Furthermore the driver does not set NETIF_F_LLTX resulting in xmit to be
called with the xmit_lock held and then taking the private lock while xmit
completion handler does the reverse, first take the private lock, then the
xmit_lock.
Fix these issues by not taking the xmit_lock in the tx completion handler.
Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
An explicit dma sync for device directly after mapping as well as an
explicit dma sync for cpu directly before unmapping is unnecessary and
costly on the hotpath. So remove these calls.
Signed-off-by: Lino Sanfilippo <LinoSanfilippo@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Fri, 2 Dec 2016 12:40:27 +0000 (13:40 +0100)]
default exported asm symbols to zero
With binutils-2.26 and before, a weak missing symbol was kept during the
final link, and a missing CRC for an export would lead to that CRC being
treated as zero implicitly. With binutils-2.27, the crc symbol gets
dropped, and any module trying to use it will fail to load.
This sets the weak CRC symbol to zero explicitly, making it defined in
vmlinux, which in turn lets us load the modules referring to that CRC.
The comment above the __CRC_SYMBOL macro suggests that this was always
the intention, although it also seems that all symbols defined in C have
a correct CRC these days, and only the exports that are now done in
assembly need this.
Sudeep Holla [Wed, 16 Nov 2016 17:31:31 +0000 (17:31 +0000)]
arm64: dts: juno: fix cluster sleep state entry latency on all SoC versions
The core and the cluster sleep state entry latencies can't be same as
cluster sleep involves more work compared to core level e.g. shared
cache maintenance.
Experiments have shown on an average about 100us more latency for the
cluster sleep state compared to the core level sleep. This patch fixes
the entry latency for the cluster sleep state.
====================
net: stmmac: fix probe error handling and phydev leaks
This series fixes a number of issues with the stmmac-driver probe error
handling, which for example left clocks enabled after probe failures.
The final patch fixes a failure to deregister and free any fixed-link
PHYs that were registered during probe on probe errors and on driver
unbind. It also fixes a related of-node leak on late probe errors.
This series depends on the of_phy_deregister_fixed_link() helper that
was just merged to net.
As mentioned earlier, one staging driver also suffers from a similar
leak and can be fixed up once the above mentioned helper hits mainline.
Note that these patches have only been compile tested.
====================
Acked-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hovold [Wed, 30 Nov 2016 14:29:55 +0000 (15:29 +0100)]
net: ethernet: stmmac: fix of-node and fixed-link-phydev leaks
Make sure to deregister and free any fixed-link phy registered during
probe on probe errors and on driver unbind by adding a new glue helper
function.
Drop the of-node reference taken in the same path also on late probe
errors (and not just on driver unbind) by moving the put from
stmmac_dvr_remove() to the new helper.
Fixes: 277323814e49 ("stmmac: add fixed-link device-tree support") Fixes: 4613b279bee7 ("ethernet: stmicro: stmmac: add missing of_node_put
after calling of_parse_phandle") Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hovold [Wed, 30 Nov 2016 14:29:54 +0000 (15:29 +0100)]
net: ethernet: stmmac: platform: fix outdated function header
Fix the OF-helper function header to reflect that the function no longer
has a platform-data parameter.
Fixes: b0003ead75f3 ("stmmac: make stmmac_probe_config_dt return the
platform data struct") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Make sure to disable clocks before returning on late probe errors.
Fixes: 566e82516253 ("net: stmmac: add a glue driver for the Amlogic
Meson 8b / GXBB DWMAC") Signed-off-by: Johan Hovold <johan@kernel.org> Acked-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Make sure to call any exit() callback to undo the effect of init()
before returning on late probe errors.
Fixes: cf3f047b9af4 ("stmmac: move hw init in the probe (v2)") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Make sure to disable runtime PM, power down the PHY, and disable clocks
before returning on late probe errors.
Fixes: 27ffefd2d109 ("stmmac: dwmac-rk: create a new probe function") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Make sure to disable clocks before returning on late probe errors.
Fixes: 8387ee21f972 ("stmmac: dwmac-sti: turn setup callback into a
probe function") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hovold [Wed, 30 Nov 2016 14:29:49 +0000 (15:29 +0100)]
net: ethernet: stmmac: dwmac-socfpga: fix use-after-free on probe errors
Make sure to call stmmac_dvr_remove() before returning on late probe
errors so that memory is freed, clocks are disabled, and the netdev is
deregistered before its resources go away.
Fixes: 3c201b5a84ed ("net: stmmac: socfpga: Remove re-registration of
reset controller") Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: David S. Miller <davem@davemloft.net>
Ingo Molnar [Fri, 2 Dec 2016 09:08:03 +0000 (10:08 +0100)]
Merge tag 'perf-core-for-mingo-20161201' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/core
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
New features:
- Support AArch64 in the 'annotate' code, native/local and
cross-arch/remote (Kim Phillips)
- Allow considering just events in a given time interval, via the
'--time start.s.ms,end.s.ms' command line, added to 'perf kmem',
'perf report', 'perf sched timehist' and 'perf script' (David Ahern)
- Add option to stop printing a callchain at one of a given group of
symbol names (David Ahern)
- Handle CPU migration events in 'perf sched timehist' (David Ahern)
- Track memory freed in 'perf kmem stat' (David Ahern)
Infrastructure:
- Add initial support (and perf test entry) for tooling hooks, starting with
'record_start' and 'record_end', that will have as its initial user the
eBPF infrastructure, where perf_ prefixed functions will be JITed and
run when such hooks are called (Wang Nan)
- Remove redundant "test" and similar strings from 'perf test' descriptions
(Arnaldo Carvalho de Melo)
Alexander Duyck [Mon, 28 Nov 2016 15:42:29 +0000 (10:42 -0500)]
ixgbe/ixgbevf: Don't use lco_csum to compute IPv4 checksum
In the case of IPIP and SIT tunnel frames the outer transport header
offset is actually set to the same offset as the inner transport header.
This results in the lco_csum call not doing any checksum computation over
the inner IPv4/v6 header data.
In order to account for that I am updating the code so that we determine
the location to start the checksum ourselves based on the location of the
IPv4 header and the length.
Fixes: b83e30104bd9 ("ixgbe/ixgbevf: Add support for GSO partial") Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Duyck [Mon, 28 Nov 2016 15:42:23 +0000 (10:42 -0500)]
igb/igbvf: Don't use lco_csum to compute IPv4 checksum
In the case of IPIP and SIT tunnel frames the outer transport header
offset is actually set to the same offset as the inner transport header.
This results in the lco_csum call not doing any checksum computation over
the inner IPv4/v6 header data.
In order to account for that I am updating the code so that we determine
the location to start the checksum ourselves based on the location of the
IPv4 header and the length.
Fixes: e10715d3e961 ("igb/igbvf: Add support for GSO partial") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
allan [Wed, 30 Nov 2016 08:29:08 +0000 (16:29 +0800)]
net: asix: Fix AX88772_suspend() USB vendor commands failure issues
The change fixes AX88772_suspend() USB vendor commands failure issues.
Signed-off-by: Allan Chou <allan@asix.com.tw> Tested-by: Allan Chou <allan@asix.com.tw> Tested-by: Jon Hunter <jonathanh@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Thu, 1 Dec 2016 18:29:41 +0000 (10:29 -0800)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov: "We are disabling automatic
probing of BYD touchpads as it results in too many false positives,
and the hardware is not terribly popular and having the protocol
support does not result in significantly improved user experience.
We also change keycode for KEY_DATA to avoid clashing with
KEY_FASTREVERSE. Luckily this newish code is used by CEC framework
that is still in staging, so it is extremely unlikely that someone has
already started using this keycode"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: change KEY_DATA from 0x275 to 0x277
Input: psmouse - disable automatic probing of BYD touchpads
Nicolas Pitre [Wed, 30 Nov 2016 22:41:58 +0000 (17:41 -0500)]
kbuild: make sure autoksyms.h exists early
Some people are able to trigger a race where autoksyms.h is used before
its empty version is even created. Let's create it at the same time as
the directory holding it is created.
Signed-off-by: Nicolas Pitre <nico@linaro.org> Tested-by: Prarit Bhargava <prarit@redhat.com> Tested-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
1) Change the error value when someone tries to run 32bit
userspace on a 64bit host from -ENOTSUPP to the userspace
exported -EOPNOTSUPP. Fix from Yi Zhao.
2) On inbound, ESN sequence numbers are already in network
byte order. So don't try to convert it again, this fixes
integrity verification for ESN. Fixes from Tobias Brunner.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This is a large batch of Netfilter fixes for net, they are:
1) Three patches to fix NAT conversion to rhashtable: Switch to rhlist
structure that allows to have several objects with the same key.
Moreover, fix wrong comparison logic in nf_nat_bysource_cmp() as this is
expecting a return value similar to memcmp(). Change location of
the nat_bysource field in the nf_conn structure to avoid zeroing
this as it breaks interaction with SLAB_DESTROY_BY_RCU and lead us
to crashes. From Florian Westphal.
2) Don't allow malformed fragments go through in IPv6, drop them,
otherwise we hit GPF, patch from Florian Westphal.
3) Fix crash if attributes are missing in nft_range, from Liping Zhang.
5) Two patches from David Ahern to fix netfilter interaction with vrf.
From David Ahern.
6) Fix element timeout calculation in nf_tables, we take milliseconds
from userspace, but we use jiffies from kernelspace. Patch from
Anders K. Pedersen.
7) Missing validation length netlink attribute for nft_hash, from
Laura Garcia.
8) Fix nf_conntrack_helper documentation, we don't default to off
anymore for a bit of time so let's get this in sync with the code.
I know is late but I think these are important, specifically the NAT
bits, as they are mostly addressing fallout from recent changes. I also
read there are chances to have -rc8, if that is the case, that would
also give us a bit more time to test this.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Kim Phillips [Wed, 30 Nov 2016 15:23:44 +0000 (09:23 -0600)]
perf annotate: AArch64 support
This is a regex converted version from the original:
https://lkml.org/lkml/2016/5/19/461
Add basic support to recognise AArch64 assembly. This allows perf to
identify AArch64 instructions that branch to other parts within the
same function, thereby properly annotating them.
Kim Phillips [Wed, 30 Nov 2016 15:23:33 +0000 (09:23 -0600)]
perf annotate: Use arch->objdump.comment_char in dec__parse()
Presume neglected in commit 786c1b5 "perf annotate: Start supporting
cross arch annotation". This doesn't fix a bug since none of the
affected arches support parsing dec/inc instructions yet.
Signed-off-by: Kim Phillips <kim.phillips@arm.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Chris Ryder <chris.ryder@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Will Deacon <will.deacon@arm.com> Link: http://lkml.kernel.org/r/20161130092333.1cca5dd2c77e1790d61c1e9c@arm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Tue, 29 Nov 2016 17:15:46 +0000 (10:15 -0700)]
perf report: Add option to specify time window of interest
Add option to allow user to control analysis window. e.g., collect data
for time window and analyze a segment of interest within that window.
Committer notes:
Testing it:
Using the perf.data file captured via 'perf kmem record':
# perf report --header-only
# ========
# captured on: Tue Nov 29 16:01:53 2016
# hostname : jouet
# os release : 4.8.8-300.fc25.x86_64
# perf version : 4.9.rc6.g5a6aca
# arch : x86_64
# nrcpus online : 4
# nrcpus avail : 4
# cpudesc : Intel(R) Core(TM) i7-5600U CPU @ 2.60GHz
# cpuid : GenuineIntel,6,61,4
# total memory : 20254660 kB
# cmdline : /home/acme/bin/perf kmem record usleep 1
# event : name = kmem:kmalloc, , id = { 931980, 931981, 931982, 931983 }, type = 2, size = 112, config = 0x1b9, { sample_period, sample_freq } = 1, sample_typ
# event : name = kmem:kmalloc_node, , id = { 931984, 931985, 931986, 931987 }, type = 2, size = 112, config = 0x1b7, { sample_period, sample_freq } = 1, sampl
# event : name = kmem:kfree, , id = { 931988, 931989, 931990, 931991 }, type = 2, size = 112, config = 0x1b5, { sample_period, sample_freq } = 1, sample_type
# event : name = kmem:kmem_cache_alloc, , id = { 931992, 931993, 931994, 931995 }, type = 2, size = 112, config = 0x1b8, { sample_period, sample_freq } = 1, s
# event : name = kmem:kmem_cache_alloc_node, , id = { 931996, 931997, 931998, 931999 }, type = 2, size = 112, config = 0x1b6, { sample_period, sample_freq } =
# event : name = kmem:kmem_cache_free, , id = { 932000, 932001, 932002, 932003 }, type = 2, size = 112, config = 0x1b4, { sample_period, sample_freq } = 1, sa
# HEADER_CPU_TOPOLOGY info available, use -I to display
# HEADER_NUMA_TOPOLOGY info available, use -I to display
# pmu mappings: cpu = 4, intel_pt = 7, intel_bts = 6, uncore_arb = 13, cstate_pkg = 15, breakpoint = 5, uncore_cbox_1 = 12, power = 9, software = 1, uncore_im
# HEADER_CACHE info available, use -I to display
# missing features: HEADER_BRANCH_STACK HEADER_GROUP_DESC HEADER_AUXTRACE HEADER_STAT
# ========
#
# # Looking at just the histogram entries for the first event:
#
# perf report | head -33
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 40 of event 'kmem:kmalloc'
# Event count (approx.): 40
#
# Overhead Trace output
# ........ ...............................................................................................................
#
37.50% call_site=ffffffffb91ad3c7 ptr=0xffff88895fc05000 bytes_req=4096 bytes_alloc=4096 gfp_flags=GFP_KERNEL
10.00% call_site=ffffffffb9258416 ptr=0xffff888a1dc61f00 bytes_req=240 bytes_alloc=256 gfp_flags=GFP_KERNEL|__GFP_ZERO
7.50% call_site=ffffffffb9258416 ptr=0xffff888a2640ac00 bytes_req=240 bytes_alloc=256 gfp_flags=GFP_KERNEL|__GFP_ZERO
2.50% call_site=ffffffffb92759ba ptr=0xffff888a26776000 bytes_req=4096 bytes_alloc=4096 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb9276864 ptr=0xffff8886f6b82600 bytes_req=136 bytes_alloc=192 gfp_flags=GFP_KERNEL|__GFP_ZERO
2.50% call_site=ffffffffb9276903 ptr=0xffff888aefcf0460 bytes_req=32 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb92ad0ce ptr=0xffff888756c98a00 bytes_req=392 bytes_alloc=512 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb92ad0ce ptr=0xffff888756c9ba00 bytes_req=504 bytes_alloc=512 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb92ad301 ptr=0xffff888a31747600 bytes_req=128 bytes_alloc=128 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb92ad511 ptr=0xffff888a9d26a2a0 bytes_req=28 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c11a0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c12c0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c1540 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c15a0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c15e0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c16e0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb936a7fb ptr=0xffff88873e8c1c20 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb936a7fb ptr=0xffff888a9d26a2a0 bytes_req=24 bytes_alloc=32 gfp_flags=GFP_KERNEL
2.50% call_site=ffffffffb9373e66 ptr=0xffff8889f1931240 bytes_req=64 bytes_alloc=64 gfp_flags=GFP_ATOMIC|__GFP_ZERO
2.50% call_site=ffffffffb9373e66 ptr=0xffff8889f1931980 bytes_req=64 bytes_alloc=64 gfp_flags=GFP_ATOMIC|__GFP_ZERO
2.50% call_site=ffffffffb9373e66 ptr=0xffff8889f1931a00 bytes_req=64 bytes_alloc=64 gfp_flags=GFP_ATOMIC|__GFP_ZERO
#
# # And then limiting using the example for 'perf kmem stat --time' used
# # in the previous changeset committer note we see that there were no
# # kmem:kmalloc in that last part of the file, but there were some
# # kmem:kmem_cache_alloc ones:
#
# perf report --time 20119.782088, --stdio
#
# Total Lost Samples: 0
#
# Samples: 0 of event 'kmem:kmalloc'
# Event count (approx.): 0
#
# Overhead Trace output
# ........ ............
#
Signed-off-by: David Ahern <dsahern@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1480439746-42695-7-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Tue, 29 Nov 2016 17:15:45 +0000 (10:15 -0700)]
perf kmem: Add option to specify time window of interest
Add option to allow user to control analysis window. e.g., collect data
for time window and analyze a segment of interest within that window.
Committer notes:
Testing it:
# perf kmem record usleep 1
[ perf record: Woken up 0 times to write data ]
[ perf record: Captured and wrote 1.540 MB perf.data (2049 samples) ]
# perf evlist
kmem:kmalloc
kmem:kmalloc_node
kmem:kfree
kmem:kmem_cache_alloc
kmem:kmem_cache_alloc_node
kmem:kmem_cache_free
# Tip: use 'perf evlist --trace-fields' to show fields for tracepoint events
#
# # Use 'perf script' to get a first approach, select a chunk for then using
# # with 'perf kmem stat --time'
#
# perf script | tail -15
usleep 9889 [0] 20119.782088: kmem:kmem_cache_free: (selinux_file_free_security+0x27) call_site=ffffffffb936aa07 ptr=0xffff888a1df49fc0
perf 9888 [3] 20119.782088: kmem:kmem_cache_free: (jbd2_journal_stop+0x1a1) call_site=ffffffffb9334581 ptr=0xffff888bdf1a39c0
perf 9888 [3] 20119.782089: kmem:kmem_cache_alloc: (jbd2__journal_start+0x72) call_site=ffffffffb9333b42 ptr=0xffff888bdf1a39c0 bytes_req=48 bytes_alloc=48 gfp_flags=GFP_NOFS|__GFP_ZERO
perf 9888 [3] 20119.782090: kmem:kmem_cache_free: (jbd2_journal_stop+0x1a1) call_site=ffffffffb9334581 ptr=0xffff888bdf1a39c0
perf 9888 [3] 20119.782090: kmem:kmem_cache_alloc: (jbd2__journal_start+0x72) call_site=ffffffffb9333b42 ptr=0xffff888bdf1a39c0 bytes_req=48 bytes_alloc=48 gfp_flags=GFP_NOFS|__GFP_ZERO
usleep 9889 [0] 20119.782091: kmem:kmem_cache_alloc: (__sigqueue_alloc+0x4a) call_site=ffffffffb90ad33a ptr=0xffff8889f071f6e0 bytes_req=160 bytes_alloc=160 gfp_flags=GFP_ATOMIC|__GFP_NOTRACK
perf 9888 [3] 20119.782091: kmem:kmem_cache_free: (jbd2_journal_stop+0x1a1) call_site=ffffffffb9334581 ptr=0xffff888bdf1a39c0
perf 9888 [3] 20119.782093: kmem:kmem_cache_free: (__sigqueue_free.part.17+0x33) call_site=ffffffffb90ad3f3 ptr=0xffff8889f071f6e0
perf 9888 [3] 20119.782098: kmem:kmem_cache_alloc: (jbd2__journal_start+0x72) call_site=ffffffffb9333b42 ptr=0xffff888bdf1a39c0 bytes_req=48 bytes_alloc=48 gfp_flags=GFP_NOFS|__GFP_ZERO
perf 9888 [3] 20119.782098: kmem:kmem_cache_free: (jbd2_journal_stop+0x1a1) call_site=ffffffffb9334581 ptr=0xffff888bdf1a39c0
perf 9888 [3] 20119.782099: kmem:kmem_cache_alloc: (jbd2__journal_start+0x72) call_site=ffffffffb9333b42 ptr=0xffff888bdf1a39c0 bytes_req=48 bytes_alloc=48 gfp_flags=GFP_NOFS|__GFP_ZERO
perf 9888 [3] 20119.782100: kmem:kmem_cache_alloc: (alloc_buffer_head+0x21) call_site=ffffffffb9287cc1 ptr=0xffff8889b12722d8 bytes_req=104 bytes_alloc=104 gfp_flags=GFP_NOFS|__GFP_ZERO
perf 9888 [3] 20119.782101: kmem:kmem_cache_free: (jbd2_journal_stop+0x1a1) call_site=ffffffffb9334581 ptr=0xffff888bdf1a39c0
perf 9888 [3] 20119.782102: kmem:kmem_cache_alloc: (jbd2__journal_start+0x72) call_site=ffffffffb9333b42 ptr=0xffff888bdf1a39c0 bytes_req=48 bytes_alloc=48 gfp_flags=GFP_NOFS|__GFP_ZERO
perf 9888 [3] 20119.782103: kmem:kmem_cache_free: (jbd2_journal_stop+0x1a1) call_site=ffffffffb9334581 ptr=0xffff888bdf1a39c0
#
# # stats for the whole perf.data file, i.e. no interval specified
#
# perf kmem stat
SUMMARY (SLAB allocator)
========================
Total bytes requested: 172,628
Total bytes allocated: 173,088
Total bytes freed: 161,280
Net total bytes allocated: 11,808
Total bytes wasted on internal fragmentation: 460
Internal fragmentation: 0.265761%
Cross CPU allocations: 0/851
#
# # stats for an end open interval, after a certain time:
#
# perf kmem stat --time 20119.782088,
SUMMARY (SLAB allocator)
========================
Total bytes requested: 552
Total bytes allocated: 552
Total bytes freed: 448
Net total bytes allocated: 104
Total bytes wasted on internal fragmentation: 0
Internal fragmentation: 0.000000%
Cross CPU allocations: 0/8
#
Signed-off-by: David Ahern <dsahern@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1480439746-42695-6-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Tue, 29 Nov 2016 17:15:44 +0000 (10:15 -0700)]
perf sched timehist: Add option to specify time window of interest
Add option to allow user to control analysis window. e.g., collect data
for time window and analyze a segment of interest within that window.
Committer notes:
Testing it:
# perf sched record -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.593 MB perf.data (25 samples) ]
#
# perf sched timehist | head -18
Samples do not have callchains.
time cpu task name wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
------------- ------ --------------- --------- --------- --------
19818.635579 [0002] <idle> 0.000 0.000 0.000
19818.635613 [0000] perf[9116] 0.000 0.000 0.000
19818.635676 [0000] <idle> 0.000 0.000 0.063
19818.635678 [0000] rcuos/2[29] 0.000 0.002 0.001
19818.635696 [0002] perf[9117] 0.000 0.004 0.116
19818.635702 [0000] <idle> 0.001 0.000 0.024
19818.635709 [0002] migration/2[25] 0.000 0.003 0.012
19818.636263 [0000] usleep[9117] 0.005 0.000 0.560
19818.636316 [0000] <idle> 0.560 0.000 0.053
19818.636358 [0002] <idle> 0.129 0.000 0.649
19818.636358 [0000] usleep[9117] 0.053 0.002 0.042
#
# perf sched timehist --time 19818.635696,
Samples do not have callchains.
time cpu task name wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
------------- ------ --------------- -------- --------- ---------
19818.635696 [0002] perf[9117] 0.000 0.120 0.000
19818.635702 [0000] <idle> 0.019 0.000 0.006
19818.635709 [0002] migration/2[25] 0.000 0.003 0.012
19818.636263 [0000] usleep[9117] 0.005 0.000 0.560
19818.636316 [0000] <idle> 0.560 0.000 0.053
19818.636358 [0002] <idle> 0.129 0.000 0.649
19818.636358 [0000] usleep[9117] 0.053 0.002 0.042
#
# perf sched timehist --time 19818.635696,19818.635709
Samples do not have callchains.
time cpu task name wait time sch delay run time
[tid/pid] (msec) (msec) (msec)
------------- ------ --------------- --------- --------- ---------
19818.635696 [0002] perf[9117] 0.000 0.120 0.000
19818.635702 [0000] <idle> 0.019 0.000 0.006
19818.635709 [0002] migration/2[25] 0.000 0.003 0.012
19818.635709 [0000] usleep[9117] 0.005 0.000 0.006
#
Signed-off-by: David Ahern <dsahern@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1480439746-42695-5-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David Ahern <dsahern@gmail.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1480439746-42695-4-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Tue, 29 Nov 2016 17:15:42 +0000 (10:15 -0700)]
perf tools: Move parse_nsec_time to time-utils.c
Code move only; no functional change intended.
Committer notes:
Fix the build on Ubuntu 16.04 x86-64 cross-compiling to S/390, with this
set of auto-detected features:
... dwarf: [ on ]
... dwarf_getlocations: [ on ]
... glibc: [ on ]
... gtk2: [ OFF ]
... libaudit: [ OFF ]
... libbfd: [ OFF ]
... libelf: [ on ]
... libnuma: [ OFF ]
... numa_num_possible_cpus: [ OFF ]
... libperl: [ OFF ]
... libpython: [ OFF ]
... libslang: [ OFF ]
... libcrypto: [ OFF ]
... libunwind: [ OFF ]
... libdw-dwarf-unwind: [ on ]
... zlib: [ on ]
... lzma: [ OFF ]
... get_cpuid: [ OFF ]
... bpf: [ on ]
Where it was failing with:
CC /tmp/build/perf/util/time-utils.o
util/time-utils.c: In function 'parse_nsec_time':
util/time-utils.c:17:13: error: implicit declaration of function 'strtoul' [-Werror=implicit-function-declaration]
time_sec = strtoul(str, &end, 10);
^
util/time-utils.c:17:2: error: nested extern declaration of 'strtoul' [-Werror=nested-externs]
time_sec = strtoul(str, &end, 10);
^
util/time-utils.c: In function 'perf_time__parse_str':
util/time-utils.c:93:2: error: implicit declaration of function 'free' [-Werror=implicit-function-declaration]
free(str);
^
util/time-utils.c:93:2: error: incompatible implicit declaration of built-in function 'free' [-Werror]
util/time-utils.c:93:2: note: include '<stdlib.h>' or provide a declaration of 'free'
Do as suggested and add a '#include <stdlib.h>' to get the free() and strtoul()
declarations and fix the build.
Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1480439746-42695-3-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
David Ahern [Tue, 29 Nov 2016 17:15:41 +0000 (10:15 -0700)]
perf tools: Add time-based utility functions
Add function to parse a user time string of the form <start>,<stop>
where start and stop are time in sec.nsec format. Both start and stop
times are optional.
Add function to determine if a sample time is within a given time
time window of interest.
Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1480439746-42695-2-git-send-email-dsahern@gmail.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
can: peak: Add support for PCAN-USB X6 USB interface
This adds support for PEAK-System PCAN-USB X6 USB to CAN interface.
The CAN FD adapter PCAN-USB X6 allows the connection of up to 6 CAN FD
or CAN networks to a computer via USB. The interface is installed in an
aluminum profile casing and is shipped in versions with D-Sub connectors
or M12 circular connectors.
The PCAN-USB X6 registers in the USB sub-system as if 3x PCAN-USB-Pro FD
adapters were plugged. So, this patch:
- updates the PEAK_USB entry of the corresponding Kconfig file
- defines and adds the device id. of the PCAN-USB X6 (0x0014) into the
table of supported device ids
- defines and adds the new software structure implementing the PCAN-USB X6,
which is obviously a clone of the software structure implementing the
PCAN-USB Pro FD.
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Tested-by: Oliver Hartkopp <socketcan@hartkopp.net> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This fixes the bitimings fields ranges supported by all the CAN-FD USB
interfaces of the PEAK-System CAN-FD adapters.
Very first development versions of the IP core API defined smaller TSGEx
and SJW fields for both nominal and data bittimings records than the
production versions. This patch fixes them by enlarging their sizes to
the actual values:
field: old size: fixed size:
nominal TSGEG1 6 8
nominal TSGEG2 4 7
nominal SJW 4 7
data TSGEG1 4 5
data TSGEG2 3 4
data SJW 2 4
Note that this has no other consequences than offering larger choice to
bitrate encoding.
Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
Nicholas Piggin [Sat, 26 Nov 2016 03:20:31 +0000 (14:20 +1100)]
powerpc/64: Fix placement of .text to be immediately following .head.text
Do not introduce any additional alignment. Placement of text section
will be set by fixed section macros. Without this, output section
alignment defaults to 4096, which makes BookE text section start at
0x1000 when it is expected to start at 0x100.
This was introduced by commit 57f266497d81 ("powerpc: Use gas sections
for arranging exception vectors") and was caught with the scripted head
section checker (not yet merged).
Fixes: 57f266497d81 ("powerpc: Use gas sections for arranging exception vectors") Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
powerpc/eeh: Fix deadlock when PE frozen state can't be cleared
In eeh_reset_device(), we take the pci_rescan_remove_lock immediately after
after we call eeh_reset_pe() to reset the PCI controller. We then call
eeh_clear_pe_frozen_state(), which can return an error. In this case, we
bail out of eeh_reset_device() without calling pci_unlock_rescan_remove().
Add a call to pci_unlock_rescan_remove() in the eeh_clear_pe_frozen_state()
error path so that we don't cause a deadlock later on.
Reported-by: Pradipta Ghosh <pradghos@in.ibm.com> Fixes: 78954700631f ("powerpc/eeh: Avoid I/O access during PE reset") Cc: stable@vger.kernel.org # v3.16+ Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com> Acked-by: Russell Currey <ruscur@russell.cc> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Linus Torvalds [Thu, 1 Dec 2016 00:33:41 +0000 (16:33 -0800)]
Merge branch 'akpm' (patches from Andrew)
Merge misc fixes from Andrew Morton:
"7 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
mm: fix false-positive WARN_ON() in truncate/invalidate for hugetlb
kasan: support use-after-scope detection
kasan: update kasan_global for gcc 7
lib/debugobjects: export for use in modules
zram: fix unbalanced idr management at hot removal
thp: fix corner case of munlock() of PTE-mapped THPs
mm, thp: propagation of conditional compilation in khugepaged.c
mm: fix false-positive WARN_ON() in truncate/invalidate for hugetlb
Hugetlb pages have ->index in size of the huge pages (PMD_SIZE or
PUD_SIZE), not in PAGE_SIZE as other types of pages. This means we
cannot user page_to_pgoff() to check whether we've got the right page
for the radix-tree index.
Let's introduce page_to_index() which would return radix-tree index for
given page.
We will be able to get rid of this once hugetlb will be switched to
multi-order entries.
Fixes: fc127da085c2 ("truncate: handle file thp") Link: http://lkml.kernel.org/r/20161123093053.mjbnvn5zwxw5e6lk@black.fi.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: Doug Nelson <doug.nelson@intel.com> Tested-by: Doug Nelson <doug.nelson@intel.com> Reviewed-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: <stable@vger.kernel.org> [4.8+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
projects / linux-beck.git / log