Amrani, Ram [Thu, 22 Dec 2016 12:40:36 +0000 (14:40 +0200)]
qedr: modify QP state to error when destroying it
Current code didn't modify the QP state to error because it queried the
QP state as a bitmap while it isn't. So the code never got executed.
This patch fixes this and queries for each QP state respectively and not
at once via a bitmask.
Bart Van Assche [Mon, 19 Dec 2016 17:00:05 +0000 (18:00 +0100)]
IB/cma: Fix a race condition in iboe_addr_get_sgid()
Code that dereferences the struct net_device ip_ptr member must be
protected with an in_dev_get() / in_dev_put() pair. Hence insert
calls to these functions.
Fixes: commit 7b85627b9f02 ("IB/cma: IBoE (RoCE) IP-based GID addressing") Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by: Moni Shoua <monis@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Cc: Roland Dreier <roland@purestorage.com> Cc: <stable@vger.kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
Steve Wise [Thu, 15 Dec 2016 16:09:35 +0000 (08:09 -0800)]
iw_cxgb4: set correct FetchBurstMax for QPs
The current QP FetchBurstMax value is 256B, which
is incorrect since a WR can exceed that value. The
result being a partial WR fetched by hardware, and
a fatal "bad WR" error posted by the SGE.
So bump the FetchBurstMax to 512B.
Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Adit Ranadive [Mon, 3 Oct 2016 02:10:22 +0000 (19:10 -0700)]
IB: Add vmw_pvrdma driver
This patch series adds a driver for a paravirtual RDMA device. The
device is developed for VMware's Virtual Machines and allows existing RDMA
applications to continue to use existing Verbs API when deployed in VMs
on ESXi. We recently did a presentation in the OFA Workshop [1] regarding
this device.
Description and RDMA Support
============================
The virtual device is exposed as a dual function PCIe device. One part
is a virtual network device (VMXNet3) which provides networking properties
like MAC, IP addresses to the RDMA part of the device. The networking
properties are used to register GIDs required by RDMA applications to
communicate.
These patches add support and the all required infrastructure for
letting applications use such a device. We support the mandatory Verbs API as
well as the base memory management extensions (Local Inv, Send with Inv and
Fast Register Work Requests). We currently support both Reliable Connected
and Unreliable Datagram QPs but do not support Shared Receive Queues
(SRQs).
Also, we support the following types of Work Requests:
o Send/Receive (with or without Immediate Data)
o RDMA Write (with or without Immediate Data)
o RDMA Read
o Local Invalidate
o Send with Invalidate
o Fast Register Work Requests
This version only adds support for version 1 of RoCE. We will add RoCEv2
support in a future patch. We do support registration of both MAC-based
and IP-based GIDs. I have also created a git tree for our user-level driver
[2].
Testing
=======
We have tested this internally for various types of Guest OS - Red Hat,
Centos, Ubuntu 12.04/14.04/16.04, Oracle Enterprise Linux, SLES 12
using backported versions of this driver. The tests included several
runs of the performance tests (included with OFED), Intel MPI PingPong
benchmark on OpenMPI, krping for FRWRs. Mellanox has been kind enough
to test the backported version of the driver internally on their hardware
using a VMware provided ESX build. I have also applied and tested this
with Doug's k.o/for-4.9 branch (commit 5603910b). Note, that this patch
series should be applied all together. I split out the commits so that
it may be easier to review.
Pan Bian [Sun, 4 Dec 2016 06:45:38 +0000 (14:45 +0800)]
IB/mlx4: fix improper return value
If uhw->inlen is non-zero, the value of variable err is 0 if the copy
succeeds. Then, if kzalloc() or kmalloc() returns a NULL pointer, it
will return 0 to the callers. As a result, the callers cannot detect the
errors. This patch fixes the bug, assign "-ENOMEM" to err before the
NULL pointer checks, and remove the initialization of err at the
beginning.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=189031 Signed-off-by: Pan Bian <bianpan2016@163.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Pan Bian [Sat, 3 Dec 2016 13:10:21 +0000 (21:10 +0800)]
IB/ocrdma: fix bad initialization
In function ocrdma_mbx_create_ah_tbl(), returns the value of status on
errors. However, because status is initialized with 0, 0 will be
returned even if on error paths. This patch initialize status with
"-ENOMEM".
Leon Romanovsky [Sun, 4 Dec 2016 06:47:46 +0000 (08:47 +0200)]
MAINTAINERS: Remove Mitesh Ahuja from emulex maintainers
Remove Mitesh Ahuja <mitesh.ahuja@avagotech.com> from
maintainers file. This email address seems not active
and causes to mail bounces during submissions.
Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
Sebastian Ott [Fri, 2 Dec 2016 13:45:26 +0000 (14:45 +0100)]
IB/core: fix unmap_sg argument
__ib_umem_release calls dma_unmap_sg with a different number of
sg_entries than ib_umem_get uses for dma_map_sg. This might cause
trouble for implementations that merge sglist entries and results
in the following dma debug complaint:
DMA-API: device driver frees DMA sg list with different entry
count [map count=2] [unmap count=1]
Fix it by using the correct value.
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Amrani, Ram [Wed, 23 Nov 2016 08:03:04 +0000 (08:03 +0000)]
qede: fix general protection fault may occur on probe
The recent introduction of qedr driver support in qede causes a GPF when probing the driver in a server without a RoCE enabled QLogic NIC. This fix avoids using an uninitialized pointer in such a case. Caught by the kernel test robot.
Bart Van Assche [Mon, 21 Nov 2016 21:57:24 +0000 (13:57 -0800)]
IB/srp: Make login failures easier to debug
If login fails because memory region allocation failed it can be
hard to figure out what happened. Make it easier to figure out
why login failed by logging a message if ib_alloc_mr() fails.
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Bart Van Assche [Mon, 21 Nov 2016 21:56:46 +0000 (13:56 -0800)]
IB/srp: Fix CONFIG_DYNAMIC_DEBUG=n build
Avoid that the kernel build fails as follows if dynamic debug support
is disabled:
drivers/infiniband/ulp/srp/ib_srp.c:2272:3: error: implicit declaration of function 'DEFINE_DYNAMIC_DEBUG_METADATA'
drivers/infiniband/ulp/srp/ib_srp.c:2272:33: error: 'ddm' undeclared (first use in this function)
drivers/infiniband/ulp/srp/ib_srp.c:2275:39: error: '_DPRINTK_FLAGS_PRINT' undeclared (first use in this function)
Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Bart Van Assche [Mon, 21 Nov 2016 18:21:17 +0000 (10:21 -0800)]
IB/mad: Fix an array index check
The array ib_mad_mgmt_class_table.method_table has MAX_MGMT_CLASS
(80) elements. Hence compare the array index with that value instead
of with IB_MGMT_MAX_METHODS (128). This patch avoids that Coverity
reports the following:
Overrunning array class->method_table of 80 8-byte elements at element index 127 (byte offset 1016) using index convert_mgmt_class(mad_hdr->mgmt_class) (which evaluates to 127).
Fixes: commit b7ab0b19a85f ("IB/mad: Verify mgmt class in received MADs") Signed-off-by: Bart Van Assche <bart.vanassche@sandisk.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: <stable@vger.kernel.org> Reviewed-by: Hal Rosenstock <hal@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Bart Van Assche [Mon, 14 Nov 2016 16:44:11 +0000 (08:44 -0800)]
IB/mlx4: Rework special QP creation error path
The special QP creation error path relies on offset_of(struct mlx4_ib_sqp,
qp) == 0. Remove this assumption because that makes the QP creation
code easier to understand.
Julia Lawall [Fri, 11 Nov 2016 19:04:26 +0000 (20:04 +0100)]
IB/usnic: simplify IS_ERR_OR_NULL to IS_ERR
The function usnic_ib_qp_grp_get_chunk only returns an ERR_PTR value or a
valid pointer, never NULL. The same is true of get_qp_res_chunk, which
just returns the result of calling usnic_ib_qp_grp_get_chunk. Simplify
IS_ERR_OR_NULL to IS_ERR in both cases.
The semantic patch that makes this change is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
expression t,e;
@@
t = \(usnic_ib_qp_grp_get_chunk(...)\|get_qp_res_chunk(...)\)
... when != t=e
- IS_ERR_OR_NULL(t)
+ IS_ERR(t)
@@
expression t,e,e1;
@@
t = \(usnic_ib_qp_grp_get_chunk(...)\|get_qp_res_chunk(...)\)
... when != t=e
?- t ? PTR_ERR(t) : e1
+ PTR_ERR(t)
... when any
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
IB/core: Issue DREQ when receiving REQ/REP for stale QP
from "InfiBand Architecture Specifications Volume 1":
A QP is said to have a stale connection when only one side has
connection information. A stale connection may result if the remote CM
had dropped the connection and sent a DREQ but the DREQ was never
received by the local CM. Alternatively the remote CM may have lost
all record of past connections because its node crashed and rebooted,
while the local CM did not become aware of the remote node's reboot
and therefore did not clean up stale connections.
and:
A local CM may receive a REQ/REP for a stale connection. It shall
abort the connection issuing REJ to the REQ/REP. It shall then issue
DREQ with "DREQ:remote QPN” set to the remote QPN from the REQ/REP.
This patch solves a problem with reuse of QPN. Current codebase, that
is IPoIB, relies on a REAP-mechanism to do cleanup of the structures
in CM. A problem with this is the timeconstants governing this
mechanism; they are up to 768 seconds and the interface may look
inresponsive in that period. Issuing a DREQ (and receiving a DREP)
does the necessary cleanup and the interface comes up.
Signed-off-by: Hans Westgaard Ry <hans.westgaard.ry@oracle.com> Reviewed-by: Håkon Bugge <haakon.bugge@oracle.com> Reviewed-by: Sagi Grimberg <sagi@grimberg.me> Signed-off-by: Doug Ledford <dledford@redhat.com>
Jim Foraker [Tue, 1 Nov 2016 20:44:12 +0000 (13:44 -0700)]
IB/rdmavt: Only put mmap_info ref if it exists
rvt_create_qp() creates qp->ip only when a qp creation request comes from
userspace (udata is not NULL). If we exceed the number of available
queue pairs however, the error path always attempts to put a kref to this
structure. If the requestor is inside the kernel, this leads to a crash.
We fix this by checking that qp->ip is not NULL before caling kref_put().
Signed-off-by: Jim Foraker <foraker1@llnl.gov> Acked-by: Dennis Dalessandro <dennis.dalessandro@intel.com> Acked-by: Jonathan Toppins <jtoppins@redhat.com> Acked-by: Alex Estrin <alex.estrin@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Petr Mladek [Wed, 19 Oct 2016 12:07:20 +0000 (14:07 +0200)]
IB/rdmavt: Handle the kthread worker using the new API
Use the new API to create and destroy the cq kthread worker.
The API hides some implementation details.
In particular, kthread_create_worker() allocates and initializes
struct kthread_worker. It runs the kthread the right way and stores
task_struct into the worker structure. In addition, the *on_cpu()
variant binds the kthread to the given cpu and the related memory
node.
kthread_destroy_worker() flushes all pending works, stops
the kthread and frees the structure.
This patch does not change the existing behavior. Note that we must
use the on_cpu() variant because the function starts the kthread
and it must bind it to the right CPU before waking. The numa node
is associated for given CPU as well.
Signed-off-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
// nothing queued yet =>
// nothing flushed and
// happily stopped and freed
if (likely(worker)) {
// true => read before CPU2 acted
cq->notify = RVT_CQ_NONE;
cq->triggered++;
kthread_queue_work(worker, &cq->comptask);
BANG: worker has been flushed/stopped/freed in the meantime.
This patch solves this by protecting the critical sections by
rdi->n_cqs_lock. It seems that this lock is not much contended
and looks reasonable for this purpose.
One catch is that rvt_cq_enter() might be called from IRQ context.
Therefore we must always take the lock with IRQs disabled to avoid
a possible deadlock.
Signed-off-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Arnd Bergmann [Tue, 25 Oct 2016 16:16:20 +0000 (18:16 +0200)]
IB/mlx4: avoid a -Wmaybe-uninitialize warning
There is an old warning about mlx4_SW2HW_EQ_wrapper on x86:
ethernet/mellanox/mlx4/resource_tracker.c: In function ‘mlx4_SW2HW_EQ_wrapper’:
ethernet/mellanox/mlx4/resource_tracker.c:3071:10: error: ‘eq’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
The problem here is that gcc won't track the state of the variable
across a spin_unlock. Moving the assignment out of the lock is
safe here and avoids the warning.
We get a false-positive warning in linux-next for the mlx5 driver:
infiniband/hw/mlx5/mr.c: In function ‘mlx5_ib_reg_user_mr’:
infiniband/hw/mlx5/mr.c:1172:5: error: ‘order’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
infiniband/hw/mlx5/mr.c:1161:6: note: ‘order’ was declared here
infiniband/hw/mlx5/mr.c:1173:6: error: ‘ncont’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
infiniband/hw/mlx5/mr.c:1160:6: note: ‘ncont’ was declared here
infiniband/hw/mlx5/mr.c:1173:6: error: ‘page_shift’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
infiniband/hw/mlx5/mr.c:1158:6: note: ‘page_shift’ was declared here
infiniband/hw/mlx5/mr.c:1143:13: error: ‘npages’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
infiniband/hw/mlx5/mr.c:1159:6: note: ‘npages’ was declared here
I had a trivial workaround for gcc-5 or higher, but that didn't work
on gcc-4.9 unfortunately.
The only way I found to avoid the warnings for gcc-4.9, short of
initializing each of the arguments first was to change the calling
conventions to separate the error code from the umem pointer. This
avoids casting the error codes from one pointer to another incompatible
pointer, and lets gcc figure out when that the data is actually valid
whenever we return successfully.
Jason Gunthorpe [Thu, 27 Oct 2016 16:51:17 +0000 (10:51 -0600)]
rdma UAPI: Use __kernel_sockaddr_storage
The kernel side is #ifdef'd to this type, and the UAPI header
should use it directly. It has slightly different alignment
requirments from the usual user space version.
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Colin Ian King [Tue, 18 Oct 2016 18:39:28 +0000 (19:39 +0100)]
qedr: return -EINVAL if pd is null and avoid null ptr dereference
Currently, if pd is null then we hit a null pointer derference
on accessing pd->pd_id. Instead of just printing an error message
we should also return -EINVAL immediately.
Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Bodong Wang [Thu, 1 Dec 2016 11:43:16 +0000 (13:43 +0200)]
IB/mlx5: Properly adjust rate limit on QP state transitions
- Add MODIFY_QP_EX CMD to extend modify_qp.
- Rate limit will be updated in the following state transactions: RTR2RTS,
RTS2RTS. The limit will be removed when SQ is in RST and ERR state.
Signed-off-by: Bodong Wang <bodong@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
Bodong Wang [Thu, 1 Dec 2016 11:43:15 +0000 (13:43 +0200)]
IB/uverbs: Extend modify_qp and support packet pacing
An new uverbs command ib_uverbs_ex_modify_qp is added to support more QP
attributes. User driver should choose to call the legacy/extended API
based on input mask.
IB_USER_LAST_QP_ATTR_MASK is added to indicated the maximum bit position
which supports legacy ib_uverbs_modify_qp.
IB_USER_LEGACY_LAST_QP_ATTR_MASK indicates the maximum bit position
which supports ib_uverbs_ex_modify_qp, the value of this mask should be
updated if new mask is added later.
Along with this change, rate_limit is supported by the extended command,
user driver could use it to control packet packing.
Signed-off-by: Bodong Wang <bodong@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
Bodong Wang [Thu, 1 Dec 2016 11:43:13 +0000 (13:43 +0200)]
IB/mlx5: Report mlx5 packet pacing capabilities when querying device
Enable mlx5 based hardware to report packet pacing capabilities
from kernel to user space. Packet pacing allows to limit the rate to any
number between the maximum and minimum, based on user settings.
The capabilities are exposed to user space through query_device by uhw.
The following capabilities are reported:
1. The maximum and minimum rate limit in kbps supported by packet pacing.
2. Bitmap showing which QP types are supported by packet pacing operation.
Signed-off-by: Bodong Wang <bodong@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
Or Gerlitz [Sun, 27 Nov 2016 14:51:36 +0000 (16:51 +0200)]
IB/mlx5: Support RAW Ethernet when RoCE is disabled
On some environments, such as certain SRIOV VF configurations, RoCE is
not supported for mlx5 Ethernet ports. Currently, the driver will not
open IB device on that port.
This is problematic, since we do want user-space RAW Ethernet (RAW_PACKET
QPs) functionality to remain in place. For that end, enhance the relevant
driver flows such that we do create a device instance in that case.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
Or Gerlitz [Sun, 27 Nov 2016 14:51:35 +0000 (16:51 +0200)]
IB/mlx5: Rename RoCE related helpers to reflect being Eth ones
This is a pre-step towards having mlx5 IB device also over Eth ports where
RoCE is not supported. We change the roce enable/disable and roce_lag
init/fini function names to have _eth instead of _roce.
This patch doesn't change any functionality.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
Or Gerlitz [Sun, 27 Nov 2016 14:51:34 +0000 (16:51 +0200)]
IB/mlx5: Refactor registration to netdev notifier
Refactor the netdev notifier registration into a small helper function.
This is a pre-step towards having mlx5 IB device over an Ethernet port
which doesn't support RoCE. Also, renamed the de-registration helper
and the new helper as netdev notifier and not roce, to make it clear
this is not only used with roce.
This patch doesn't change any functionality.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
Maor Gottlieb [Sun, 27 Nov 2016 13:18:22 +0000 (15:18 +0200)]
IB/mlx5: Use u64 for UMR length
The fast_registration length is used to convey length for memory
registrations through UMR which can be of any size up to 2^64.
Change the length type to be u64.
Fixes: 968e78dd9644 ('IB/mlx5: Enhance UMR support to allow partial page table update') Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
Eli Cohen [Sun, 27 Nov 2016 13:18:21 +0000 (15:18 +0200)]
IB/mlx5: Avoid system crash when enabling many VFs
When enabling many VFs, the total amount of DMA mappings increase
significantly. This causes DMA allocations to take a lot of time
since they are serialized in the kernel.
As a result the driver enters into fatal condition due to
timeout and the system hangs. To recover from this we disable
MR cache for VFs.
PFs will still have a full cache and VFs cache can be manipulated
as usual after driver load.
Fixes: e126ba97dba9 ('mlx5: Add driver for Mellanox Connect-IB adapters') Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
Jack Morgenstein [Sun, 27 Nov 2016 13:18:19 +0000 (15:18 +0200)]
IB/mlx4: Fix out-of-range array index in destroy qp flow
For non-special QPs, the port value becomes non-zero only at the
RESET-to-INIT transition. If the QP has not undergone that transition,
its port number value is still zero.
If such a QP is destroyed before being moved out of the RESET state,
subtracting one from the qp port number results in a negative value.
Using that negative value as an index into the qp1_proxy array
results in an out-of-bounds array reference.
Fix this by testing that the QP type is one that uses qp1_proxy before
using the port number. For special QPs of all types, the port number is
specified at QP creation time.
Fixes: 9433c188915c ("IB/mlx4: Invoke UPDATE_QP for proxy QP1 on MAC changes") Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
Moni Shoua [Wed, 23 Nov 2016 06:23:25 +0000 (08:23 +0200)]
IB/mlx5: Use kernel driver to help userspace create ah
Resolving a MAC address for a given IP address in userspace is inefficient.
This patch lets mlx5 user driver using the kernel driver to resolve the mac
and get the answer in the private section of the response.
Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
Moni Shoua [Wed, 23 Nov 2016 06:23:24 +0000 (08:23 +0200)]
IB/core: Let create_ah return extended response to user
Add struct ib_udata to the signature of create_ah callback that is
implemented by IB device drivers. This allows HW drivers to return extra
data to the userspace library.
This patch prepares the ground for mlx5 driver to resolve destination
mac address for a given GID and return it to userspace.
This patch was previously submitted by Knut Omang as a part of the
patch set to support Oracle's Infiniband HCA (SIF).
Signed-off-by: Knut Omang <knut.omang@oracle.com> Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
Moni Shoua [Wed, 23 Nov 2016 06:23:23 +0000 (08:23 +0200)]
IB/mlx5: Report that device has udata response in create_ah
To make mlx5 user driver aware of whether kernel driver returns dmac
in user data response add a new flag that will be returned back to
user-space through alloc_ucontext.
Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
Moni Shoua [Wed, 23 Nov 2016 06:23:22 +0000 (08:23 +0200)]
IB/core: Change ib_resolve_eth_dmac to use it in create AH
The function ib_resolve_eth_dmac() requires struct qp_attr * and
qp_attr_mask as parameters while the function might be useful to resolve
dmac for address handles. This patch changes the signature of the
function so it can be used in the flow of creating an address handle.
Signed-off-by: Moni Shoua <monis@mellanox.com> Reviewed-by: Yishai Hadas <yishaih@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
Moses Reuben [Mon, 14 Nov 2016 17:04:52 +0000 (19:04 +0200)]
IB/mlx5: Add support to match inner packet fields
Add support to match packet fields which are tunneled,
i.e. support matching the header of the inner packet which is the result of
or bit operation of the original header and the IB_FLOW_SPEC_INNER type.
The combination of IB_FLOW_SPEC_INNER | IB_FLOW_SPEC_VXLAN_TUNNEL is not
needed to be checked, because the IB core has this check already.
Signed-off-by: Moses Reuben <mosesr@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
Moses Reuben [Mon, 14 Nov 2016 17:04:51 +0000 (19:04 +0200)]
IB/core: Introduce inner flow steering
For a tunneled packet which contains external and internal headers,
we refer to the external headers as "outer fields" and the internal
headers as "inner fields".
This patch introduces a new flag for flow steering rules
- IB_FLOW_SPEC_INNER - which specifies that the rule applies
to the inner fields, rather than to the outer fields of the packet.
Signed-off-by: Moses Reuben <mosesr@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
Moses Reuben [Mon, 14 Nov 2016 17:04:49 +0000 (19:04 +0200)]
IB/uverbs: Add support for Vxlan protocol
Add ib_uverbs_flow_spec_tunnel to define the rule to match Vxlan,
the type, size, reserved fields are identical to rest of the protocols,
and are used to identify the spec.
The tunnel id is the vni value of the Vxlan protocol, and it is used
as part of the steering rule, it is limited by the mask.
The steering rule configured on the hardware does a match
according to vni and other protocols.
In the same way as rest of the protocols that we match,
the uniq field's of each protocol are represented on
the val and the mask.
Signed-off-by: Moses Reuben <mosesr@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
Moses Reuben [Mon, 14 Nov 2016 17:04:47 +0000 (19:04 +0200)]
IB/core: Add flow spec tunneling support
In order to support tunneling, that can be used by the QP,
both struct ib_flow_spec_tunnel and struct ib_flow_tunnel_filter can be
used to more IP or UDP based tunneling protocols (e.g NVGRE, GRE, etc).
IB_FLOW_SPEC_VXLAN_TUNNEL type flow specification is added to use this
functionality and match specific Vxlan packets.
In similar to IPv6, we check overflow of the vni value by
comparing with the maximum size.
Signed-off-by: Moses Reuben <mosesr@mellanox.com> Reviewed-by: Maor Gottlieb <maorg@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
Bodong Wang [Mon, 31 Oct 2016 10:16:45 +0000 (12:16 +0200)]
IB/mlx5: Add support for CQE compressing
CQE compressing reduces PCI overhead by coalescing and compressing
multiple CQEs into a single merged CQE. Successful compressing
improves message rate especially for small packet traffic.
CQE compressing is supported for all 64B CQE formats (with certain
limitations) generated by RQ/Responder or by SQ/Requestor.
Signed-off-by: Bodong Wang <bodong@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
Bodong Wang [Mon, 31 Oct 2016 10:16:44 +0000 (12:16 +0200)]
IB/mlx5: Report mlx5 CQE compression caps during query
The capabilities include:
- Max number of compressed and aggregated CQEs in a single session,
while zero means unsupported.
- For Responder, there are two formats of mini CQE: mini CQE with Rx
hash and mini CQE with checksum. They're mutual exclusive.
Signed-off-by: Bodong Wang <bodong@mellanox.com> Reviewed-by: Matan Barak <matanb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
Eran Ben Elisha [Thu, 10 Nov 2016 09:31:01 +0000 (11:31 +0200)]
IB/mlx4: Check if GRH is available before using it
Before reading GRH attributes, need to make sure AH contains GRH,
and in addition, initialize GID type.
Fixes: dbf727de7440 ('IB/core: Use GID table in AH creation and dmac resolution') Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
Eran Ben Elisha [Thu, 10 Nov 2016 09:31:00 +0000 (11:31 +0200)]
IB/mlx4: When no DMFS for IPoIB, don't allow NET_IF QPs
According to the firmware spec, FLOW_STEERING_IB_UC_QP_RANGE command is
supported only if dmfs_ipoib bit is set.
If it isn't set we want to ensure allocating NET_IF QPs fail. We do so
by filling out the allocation bitmap. By thus, the NET_IF QPs allocating
function won't find any free QP and will fail.
Fixes: c1c98501121e ('IB/mlx4: Add support for steerable IB UD QPs') Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: Daniel Jurgens <danielj@mellanox.com> Reviewed-by: Mark Bloch <markb@mellanox.com> Signed-off-by: Leon Romanovsky <leon@kernel.org> Signed-off-by: Doug Ledford <dledford@redhat.com>
Shiraz Saleem [Tue, 6 Dec 2016 21:49:33 +0000 (15:49 -0600)]
i40iw: Fix race condition in terminate timer's handler
Add a QP reference when terminate timer is started to ensure
the destroy QP doesn't race ahead to free the QP while it is being
referenced in the terminate timer's handler.
Mustafa Ismail [Tue, 6 Dec 2016 21:49:32 +0000 (15:49 -0600)]
i40iw: Fix memory leak in CQP destroy when in reset
On a device close, the control QP (CQP) is destroyed by calling
cqp_destroy which destroys the CQP and frees its SD buffer memory.
However, if the reset flag is true, cqp_destroy is never called and
leads to a memory leak on SD buffer memory. Fix this by always calling
cqp_destroy, on device close, regardless of reset. The exception to this
when CQP create fails. In this case, the SD buffer memory is already
freed on an error check and there is no need to call cqp_destroy.
Shiraz Saleem [Tue, 6 Dec 2016 21:49:31 +0000 (15:49 -0600)]
i40iw: Fix QP flush to not hang on empty queues or failure
When flush QP and there are no pending work requests, signal completion
to unblock i40iw_drain_sq and i40iw_drain_rq which are waiting on
completion for iwqp->sq_drained and iwqp->sq_drained respectively.
Also, signal completion if flush QP fails to prevent the drain SQ or RQ
from being blocked indefintely.
Mustafa Ismail [Tue, 6 Dec 2016 21:49:30 +0000 (15:49 -0600)]
i40iw: Fix double free of QP
A QP can be double freed if i40iw_cm_disconn() is
called while it is currently being freed by
i40iw_rem_ref(). The fix in i40iw_cm_disconn() will
first check if the QP is already freed before
making another request for the QP to be freed.
Signed-off-by: Mustafa Ismail <mustafa.ismail@intel.com> Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com> Signed-off-by: Henry Orosco <henry.orosco@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Shiraz Saleem [Fri, 11 Nov 2016 16:55:41 +0000 (10:55 -0600)]
i40iw: Use correct src address in memcpy to rdma stats counters
hw_stats is a pointer to i40_iw_dev_stats struct in i40iw_get_hw_stats().
Use hw_stats and not &hw_stats in the memcpy to copy the i40iw device stats
data into rdma_hw_stats counters.
Thomas Huth [Wed, 5 Oct 2016 11:55:38 +0000 (13:55 +0200)]
i40iw: Remove macros I40IW_STAG_KEY_FROM_STAG and I40IW_STAG_INDEX_FROM_STAG
The macros I40IW_STAG_KEY_FROM_STAG and I40IW_STAG_INDEX_FROM_STAG are
apparently bad - they are using the logical "&&" operation which
does not make sense here. It should have been a bitwise "&" instead.
Since the macros seem to be completely unused, let's simply remove
them so that nobody accidentially uses them in the future. And while
we're at it, also remove the unused macro I40IW_CREATE_STAG.
Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Leon Romanovsky <leonro@mellanox.com> Acked-by: Faisal Latif <faisal.latif@intel.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
Andrew Boyer [Mon, 5 Dec 2016 13:43:21 +0000 (08:43 -0500)]
IB/rxe: Hold refs when running tasklets
It might be possible for all of a QP's references to be dropped
while one of that QP's tasklets is running.
For example, the completer might run during QP destroy.
If qp->valid is false, it will drop all of the packets on
the resp_pkts list, potentially removing the last reference.
Then it tries to advance the SQ consumer pointer. If the
SQ's buffer has already been destroyed, the system will
panic.
To be safe, hold a reference on the QP for the duration
of each tasklet.
Signed-off-by: Andrew Boyer <andrew.boyer@dell.com> Signed-off-by: Doug Ledford <dledford@redhat.com>
The responder generates a receive error on node B since the incoming
SEND is oversized. If the client tears down the QP before the responder
or the completer finish running, a page fault may occur.
The fix makes the destroy operation spin until the tasks complete, which
appears to be original intent of the design.
projects / linux-beck.git / log