Frank Schaefer [Thu, 21 Mar 2013 16:51:20 +0000 (13:51 -0300)]
[media] bttv: apply mute settings on open
Previously, this has been done implicitly for video device nodes by calling
set_input() (which calls audio_input() and also modified the mute
setting).
Since input and mute setting are now untangled (as much as possible), we need to
apply the mute setting with an explicit call to audio_mute().
Also apply the mute setting when the radio device node gets opened.
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Frank Schaefer [Thu, 21 Mar 2013 16:51:17 +0000 (13:51 -0300)]
[media] bttv: separate GPIO part from function audio_mux()
Move the GPIO part of function audio_mux() to a separate function
audio_mux_gpio().
This prepares the code for the next patch which will separate mute and input
setting.
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Frank Schaefer [Thu, 21 Mar 2013 16:51:14 +0000 (13:51 -0300)]
[media] bttv: audio_mux(): do not change the value of the v4l2 mute control
There are cases where we want to call audio_mux() without changing the value of
the v4l2 mute control, for example
- mute mute on last close
- mute on device probing
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Frank Schaefer [Thu, 21 Mar 2013 16:51:13 +0000 (13:51 -0300)]
[media] bttv: audio_mux(): use a local variable "gpio_mute" instead of modifying the function parameter "mute"
Function audio_mux() actually deals with two types of mute: gpio mute and
subdevice muting.
This patch claryfies the meaning of these values, but mainly prepares the code for
the next patch.
Signed-off-by: Frank Schäfer <fschaefer.oss@googlemail.com> Acked-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Wei Yongjun [Mon, 11 Mar 2013 12:57:22 +0000 (09:57 -0300)]
[media] davinci: vpfe: fix return value check in vpfe_enable_clock()
In case of error, the function clk_get() returns ERR_PTR()
and never returns NULL. The NULL test in the return value
check should be replaced with IS_ERR().
David Härdeman [Wed, 6 Mar 2013 19:52:05 +0000 (16:52 -0300)]
[media] rc-core: don't treat dev->rc_map.rc_type as a bitmap
store_protocols() treats dev->rc_map.rc_type as a bitmap which is wrong for
two reasons. First of all, it is pretty bogus to change the protocol type of
the keymap just because the hardware has been asked to decode a different
protocol.
Second, dev->rc_map.rc_type is an enum (i.e. a single protocol) as pointed
out by James Hogan <james.hogan@imgtec.com>.
Fix both issues by introducing a separate enabled_protocols member to
struct rc_dev.
Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 15 Feb 2013 18:00:20 +0000 (15:00 -0300)]
[media] s5p-tv: remove the dv_preset API from hdmiphy
The dv_preset API is deprecated and is replaced by the much improved dv_timings
API. Remove the dv_preset support from this driver as this will allow us to
remove the dv_preset API altogether (s5p-tv being the last user of this code).
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Tomasz Stanislawski <t.stanislaws@samsung.com> Acked-by: Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 15 Feb 2013 17:59:48 +0000 (14:59 -0300)]
[media] s5p-tv: remove the dv_preset API from hdmi
The dv_preset API is deprecated and is replaced by the much improved dv_timings
API. Remove the dv_preset support from this driver as this will allow us to
remove the dv_preset API altogether (s5p-tv being the last user of this code).
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Tomasz Stanislawski <t.stanislaws@samsung.com> Acked-by: Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Mon, 4 Mar 2013 12:32:00 +0000 (09:32 -0300)]
[media] s5p-tv: remove dv_preset support from mixer_video
The dv_preset API is deprecated and is replaced by the much improved dv_timings
API. Remove the dv_preset support from this driver as this will allow us to
remove the dv_preset API altogether (s5p-tv being the last user of this code).
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Tomasz Stanislawski <t.stanislaws@samsung.com> Acked-by: Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Mon, 4 Mar 2013 12:28:57 +0000 (09:28 -0300)]
[media] s5p-tv: add dv_timings support for hdmiphy
This just adds dv_timings support without modifying existing dv_preset
support, although I had to refactor a little bit in order to share
hdmiphy_find_conf() between the preset and timings code.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Tested-by: Tomasz Stanislawski <t.stanislaws@samsung.com> Acked-by: Tomasz Stanislawski <t.stanislaws@samsung.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Lad, Prabhakar [Wed, 20 Mar 2013 04:28:27 +0000 (01:28 -0300)]
[media] davinci: vpif: Fix module build for capture and display
export the symbols which are used by two modules vpif_capture and
vpif_display. renamed "ch_params" to "vpif_ch_params" so as to avoid
name collision.
This patch fixes following error:
ERROR: "ch_params" [drivers/media/platform/davinci/vpif_display.ko] undefined!
ERROR: "vpif_ch_params_count" [drivers/media/platform/davinci/vpif_display.ko] undefined!
ERROR: "vpif_base" [drivers/media/platform/davinci/vpif_display.ko] undefined!
ERROR: "ch_params" [drivers/media/platform/davinci/vpif_capture.ko] undefined!
ERROR: "vpif_ch_params_count" [drivers/media/platform/davinci/vpif_capture.ko] undefined!
ERROR: "vpif_base" [drivers/media/platform/davinci/vpif_capture.ko] undefined!
make[1]: *** [__modpost] Error 1
Antti Palosaari [Sun, 10 Mar 2013 00:10:14 +0000 (21:10 -0300)]
[media] it913x: fix pid filter
I just made commit: "dvb_usb_v2: rework USB streaming logic" that
breaks that driver PID filter.
it913x driver checks use of PID filter directly from DVB USB v2 core
internal variable "adap->pid_filtering" and stores it to own state.
Calling order of .pid_filter_ctrl() and .pid_filter() was changed
and due to that state was updated too late. Update state earlier.
TODO: checking PID filter usage from DVB USB v2 is not very good idea
as PID filter callbacks are called only when PID filter is enabled.
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Sat, 9 Mar 2013 19:10:55 +0000 (16:10 -0300)]
[media] dvb_usb_v2: rework USB streaming logic
Control flow order changed a little bit. HW PID filter is now
disabled also when streaming is stopped - earlier it was just
set only when streaming was started.
Control flow is now:
* set streaming status bit
* submit USB streaming packets
* enable HW PID filter
* ask device to start streaming
* N x add PID to device HW PID filter
... streaming video ...
* N x remove PID from device HW PID filter
* ask device to stop streaming
* disable HW PID filter
* kill USB streaming packets
* clear streaming status bit
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Sat, 9 Mar 2013 03:16:32 +0000 (00:16 -0300)]
[media] dvb_usb_v2: replace Kernel userspace lock with wait queue
There was sync mutex which was held over userspace. That is very
wrong and could cause deadlock if different userspace process is
used to "unlock". Wait queue seems to be correct solution for
that kind of synchronizing issue so use it instead.
lock debug gives following bug report:
================================================
[ BUG: lock held when returning to user space! ]
3.9.0-rc1+ #38 Tainted: G O
------------------------------------------------
tzap/4614 is leaving the kernel with locks still held!
1 lock held by tzap/4614:
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Hans Verkuil [Fri, 22 Mar 2013 12:54:00 +0000 (09:54 -0300)]
[media] em28xx: tuner setup is broken after algo_data change
Commit aab3125c43d8fecc7134e5f1e729fabf4dd196da broke em28xx. I traced
this eventually to the change in what algo_data points to. This pointer
is also passed to em28xx_tuner_callback() through several hidden tuner
layers (yuck!) and that callback was not updated.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
As complained by gcc:
drivers/media/usb/gspca/m5602/m5602_ov7660.c: In function 'ov7660_init':
drivers/media/usb/gspca/m5602/m5602_ov7660.c:99:9: warning: variable 'err' set but not used [-Wunused-but-set-variable]
It should be noticed that the original error code was crappy, as it wasn't
returning any error if sensor init fails.
Fix it by returning an error if the sensor can't be initialized.
Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Changeset 8f3741e accidentally broke the CNR estimation. It should
be calculated as "a + b - c". However, previously, the subtraction
by c only occurred if SNR would be positive, due to a bad binding
to DVBv3 API.
This also fixes the following warning:
drivers/media/dvb-frontends/drxk_hard.c:2556:6: warning: variable 'c' set but not used [-Wunused-but-set-variable]
Those are demodulator init tables according to used tuner tuner
config. af9033 demod driver does those inits currently and due
to that these duplicate inits could be removed.
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Antti Palosaari [Thu, 7 Mar 2013 22:22:52 +0000 (19:22 -0300)]
[media] af9035: change dual mode boolean to bit field
For some reason there seems to be value 0x03 in eeprom for dual mode
(and 0x00 for single mode). Boolean is not always 1 bit wide - it
could be 8 bit wide too. Storing number 0x03 to boolean causes driver
to thing there is 4 tuners in some cases :o
Add also some comments regarding to eeprom.
Signed-off-by: Antti Palosaari <crope@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Federico Fuga [Fri, 24 Aug 2012 14:54:11 +0000 (11:54 -0300)]
[media] Corrected Oops on omap_vout when no manager is connected
If no manager is connected to the vout device, the omapvid_init() function
fails. No error condition is checked, and the device is started. Later on,
when irq is serviced, a NULL pointer dereference occurs.
Also, the isr routine must be registered only if no error occurs, otherwise
the isr triggers without the proper setup, and the kernel oops again.
To prevent this, the error condition is checked, and the streamon function
exits with error. Also the isr registration call is moved after the setup
procedure is completed.
Dmitri Belimov [Wed, 13 Mar 2013 03:23:36 +0000 (00:23 -0300)]
[media] xc5000: fix incorrect debug printnk
I found very small bug in xc5000 source. When set option debug=1 and
listen a radio we see in dmesg xc5000: xc_SetTVStandard()
Standard = M/N-NTSC/PAL-BTSC at all times. However, it should be, instead
"FM Radio-INPUT1_MONO".
That happens because xc5000_set_radio_freq() gets the correct value for
VideoMode and AudioMode for radio and calls xc_SetTVStandard() where name
of standard comes from the incorrect place priv->video_standard.
This incorrect debug message makes debugging a little difficult.
Paul Bolle [Mon, 11 Mar 2013 21:30:03 +0000 (18:30 -0300)]
[media] soc_camera: remove two outdated selects
Release v2.6.30 removed the MT9M001_PCA9536_SWITCH and
MT9V022_PCA9536_SWITCH Kconfig symbols, in commits 36034dc325ecab63c8cfb992fbf9a1a8e94738a2 ("V4L/DVB (11032): mt9m001:
allow setting of bus width from board code") and e958e27adeade7fa085dd396a8a0dfaef7e338c1 ("V4L/DVB (11033): mt9v022:
allow setting of bus width from board code").
These two commits removed all gpio related code from these two drivers.
But they skipped removing their two selects of GPIO_PCA953X. Remove
these now as they are outdated. Their dependencies can never evaluate to
true anyhow.
Sachin Kamat [Mon, 4 Mar 2013 08:15:21 +0000 (05:15 -0300)]
[media] soc_camera/sh_mobile_csi2: Convert to devm_ioremap_resource()
Use the newly introduced devm_ioremap_resource() instead of
devm_request_and_ioremap() which provides more consistent error handling.
devm_ioremap_resource() provides its own error messages; so all explicit
error messages can be removed from the failure code paths.
Sachin Kamat [Mon, 4 Mar 2013 08:15:20 +0000 (05:15 -0300)]
[media] soc_camera/sh_mobile_ceu_camera: Convert to devm_ioremap_resource()
Use the newly introduced devm_ioremap_resource() instead of
devm_request_and_ioremap() which provides more consistent error handling.
devm_ioremap_resource() provides its own error messages; so all explicit
error messages can be removed from the failure code paths.
[media] mt9v022 driver: send valid HORIZONTAL_BLANKING values to mt9v024 soc camera
This patch fixes the issue that appears when mt9v024 camera is used with the
mt9v022 soc camera driver. The minimum total row time is 690 columns
(horizontal width + horizontal blanking). The minimum horizontal
blanking is 61. Thus, when the window width is set below 627, horizontal blanking must
be increased. For the mt9v024 camera the values above are correct and
for the mt9v022 camera the correct values are in the existing kernel driver.
[media] mt9m111: fix Oops - initialise context before dereferencing
A recent commit "[media] soc-camera: Push probe-time power management to
drivers" causes an Oops during mt9m111 driver probing because its .ctx
private data field is now dereferenced before it is initialised. Fix this
by initialising the field earlier.
Reported-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Tested-by: Javier Martin <javier.martin@vista-silicon.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
projects / linux-beck.git / log