Li Zefan [Thu, 22 Apr 2010 09:30:40 +0000 (17:30 +0800)]
sched: Fix an RCU warning in print_task()
With CONFIG_PROVE_RCU=y, a warning can be triggered:
$ cat /proc/sched_debug
...
kernel/cgroup.c:1649 invoked rcu_dereference_check() without protection!
...
Both cgroup_path() and task_group() should be called with either
rcu_read_lock or cgroup_mutex held.
The rcu_dereference_check() does include cgroup_lock_is_held(), so we
know that this lock is not held. Therefore, in a CONFIG_PREEMPT kernel,
to say nothing of a CONFIG_PREEMPT_RT kernel, the original code could
have ended up copying a string out of the freelist.
This patch inserts RCU read-side primitives needed to prevent this
scenario.
Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
[root@andromeda ~]# keyctl newring fred @s 539196288
[root@andromeda ~]# keyctl request2 user a a 539196288
request_key: Required key not available
Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
mutex: Don't spin when the owner CPU is offline or other weird cases
Due to recent load-balancer changes that delay the task migration to
the next wakeup, the adaptive mutex spinning ends up in a live lock
when the owner's CPU gets offlined because the cpu_online() check
lives before the owner running check.
This patch changes mutex_spin_on_owner() to return 0 (don't spin) in
any case where we aren't sure about the owner struct validity or CPU
number, and if the said CPU is offline. There is no point going back &
re-evaluate spinning in corner cases like that, let's just go to
sleep.
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1271212509.13059.135.camel@pasglop> Signed-off-by: Ingo Molnar <mingo@elte.hu>
Merge branch 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev
* 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev:
libata: ensure NCQ error result taskfile is fully initialized before returning it via qc->result_tf.
libata: fix docs, RE port and device of libata.force ID separated by point
pata_pcmcia/ide-cs: add IDs for transcend and kingston cards
libata: fix locking around blk_abort_request()
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
usb: Increase timeout value for device reset
USB: put claimed interfaces in the "suspended" state
USB: EHCI: defer reclamation of siTDs
USB: fix remote wakeup settings during system sleep
USB: pl2303: add AdLink ND-6530 USB IDs
USB: Add id for HP ev2210 a.k.a Sierra MC5725 miniPCI-e Cell Modem.
USB: OHCI: DA8xx/OMAP-L1x: fix up macro rename
USB: qcaux: add LG Rumor and Sanyo Katana LX device IDs
usb: wusb: don't overflow the Keep Alive IE buffer
USB: ehci: omap: fix kernel panic with rmmod
USB: fixed bug in usbsevseg using USB autosuspend incorrectly
USB: ti_usb_3410_5052: adding multitech dialup fax/modem devices
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6:
sysfs: use sysfs_attr_init in ASUS atk0110 driver
Documentation/HOWTO: update git home URL
Documentation: -stable rules: upstream commit ID requirement reworded
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/anholt/drm-intel:
drm/i915: use PIPE_CONTROL instruction on Ironlake and Sandy Bridge
drm/i915: cleanup FBC buffers at unload time
drm/i915: fix tiling limits for i915 class hw v2
drm/i915: set DIDL using the ACPI video output device _ADR method return.
drm/i915: Fix 82854 PCI ID, and treat it like other 85X
drm/i915: Attempt to fix watermark setup on 85x (v2)
Stefan Richter [Thu, 1 Apr 2010 20:01:52 +0000 (22:01 +0200)]
Documentation: -stable rules: upstream commit ID requirement reworded
It is a hard requirement to include the upstream commit ID in the
changelog of a -stable submission, not just a courtesy to the stable
team. This concerns only mail submission though, which is no longer
the only way into stable. (Also, fix a double "the".)
Signed-off-by: Stefan Richter <stefanr@s5r6.in-berlin.de> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
It seems that for USB IP on Freescale MX5x processors, it needs >750
usec for the reset to complete. This change should not hurt any other
EHCI hardware.
Alan Stern [Fri, 9 Apr 2010 20:03:43 +0000 (16:03 -0400)]
USB: put claimed interfaces in the "suspended" state
This patch (as1370) fixes a bug in the USB runtime power management
code. When a driver claims an interface, it doesn't expect to need to
call usb_autopm_get_interface() or usb_autopm_put_interface() for
runtime PM to work. Runtime PM can be controlled by the driver's
primary interface; the additional interfaces it claims shouldn't
interfere. As things stand, the claimed interfaces will prevent the
device from autosuspending.
To fix this problem, the patch sets interfaces to the suspended state
when they are claimed.
Also, although in theory this shouldn't matter, the patch changes the
suspend code so that interfaces are suspended in reverse order from
detection and resuming. This is how the PM core works, and we ought
to use the same approach.
Alan Stern [Thu, 8 Apr 2010 20:56:37 +0000 (16:56 -0400)]
USB: EHCI: defer reclamation of siTDs
This patch (as1369) fixes a problem in ehci-hcd. Some controllers
occasionally run into trouble when the driver reclaims siTDs too
quickly. This can happen while streaming audio; it causes the
controller to crash.
The patch changes siTD reclamation to work the same way as iTD
reclamation: Completed siTDs are stored on a list and not reused until
at least one frame has passed.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Tested-by: Nate Case <ncase@xes-inc.com> CC: <stable@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Alan Stern [Fri, 2 Apr 2010 17:20:11 +0000 (13:20 -0400)]
USB: fix remote wakeup settings during system sleep
This patch (as1363) changes the way USB remote wakeup is handled
during system sleeps. It won't be enabled unless an interface driver
specifically needs it. Also, it won't be enabled during the FREEZE or
QUIESCE phases of hibernation, when the system doesn't respond to
wakeup events anyway. Finally, if the device is already
runtime-suspended with remote wakeup enabled, but wakeup is supposed
to be disabled for the system sleep, the device gets woken up so that
it can be suspended again with the proper wakeup setting.
This will fix problems people have reported with certain USB webcams
that generate wakeup requests when they shouldn't, and as a result
cause system suspends to fail. See
Manuel Jander [Mon, 29 Mar 2010 21:51:57 +0000 (23:51 +0200)]
USB: pl2303: add AdLink ND-6530 USB IDs
I read a rumor that the AdLink ND6530 USB RS232, RS422 and RS485
isolated adapter is actually a PL2303 based usb serial adapter. I
tried it out, and as far as I can tell it works.
Signed-off-by: Manuel Jander <manuel.jander@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Sergei Shtylyov [Fri, 26 Mar 2010 14:37:14 +0000 (17:37 +0300)]
USB: OHCI: DA8xx/OMAP-L1x: fix up macro rename
It appears that the DA8xx/OMAP-L1x glue layer went into the kernel uncompilable:
commit 1960e693ac12ae5fe518309d6a63a44c93fad9e7 (davinci: da8xx/omapl1: add
support for the second sysconfig module) has renamed DA8XX_SYSCFG_* macros to
DA8XX_SYSCFG0_* and it's been committed before the glue layer...
Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Sets the regulator values to NULL if they are not defined. This
is required to fix the kernel panic in exit path when EHCI module
is removed on the platforms where EHCI regulator are not set.
The following patch adds support for Multitech Systems' MT9234MU and
MT9234ZBA usb dialup fax modems. It is based on a patch and firmware
provided to me by Multitech Systems' support, after I reported to them
that my MT9234MU modem was not working with recent linux kernels.
Signed-off-by: Alex Manoussakis <alex@juniper.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
drm/i915: use PIPE_CONTROL instruction on Ironlake and Sandy Bridge
Since 965, the hardware has supported the PIPE_CONTROL command, which
provides fine grained GPU cache flushing control. On recent chipsets,
this instruction is required for reliable interrupt and sequence number
reporting in the driver.
So add support for this instruction, including workarounds, on Ironlake
and Sandy Bridge hardware.
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6:
firewire: ohci: wait for local CSR lock access to finish
firewire: ohci: prevent aliasing of locally handled register addresses
firewire: core: fw_iso_resource_manage: return -EBUSY when out of resources
firewire: core: fix retries calculation in iso manage_channel()
firewire: cdev: fix cut+paste mistake in disclaimer
I posted to dri-devel@lists.sourceforge.net, and got a bounce back:
The dri-devel list has moved to freedesktop.org (see
http://lists.freedesktop.org/mailman/listinfo/dri-devel). If you were
subscribed to the list here, the subscription should have been
transferred to the new location.
Michael Holzheu [Thu, 22 Apr 2010 15:17:07 +0000 (17:17 +0200)]
[S390] zcore: Fix reipl device detection
The reipl device information is passed from the kernel to zfcpdump
using a pointer in the lowcore (0xe00) that points to the reipl
information Currently if that pointer is not zero, we copy the reipl
information. If the pointer is not initialized and points outside
the accessible memory, it can happen that the memory copy fails.
In that case we currently stop the initialization of zcore which leads
to a failing kernel dump. The correct behavior is to disable the reipl
after dump and continue with zcore intialization.
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Commit "timekeeping: Fix clock_gettime vsyscall time warp" (0696b711e)
introduced the new parameter "mult" to update_vsyscall(). This parameter
contains the internal NTP adjusted clock multiplier.
The s390x vdso did not use this adjusted multiplier. Instead, it used
the constant clock multiplier for gettimeofday() and clock_gettime()
variants. This may result in observable time warps as explained in
commit 0696b711e.
Make the NTP adjusted clock multiplier available to the s390x vdso
implementation and use it for time calculations.
Cc: <stable@kernel.org> Signed-off-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Sebastian Ott [Thu, 22 Apr 2010 15:17:05 +0000 (17:17 +0200)]
[S390] cio: use exception-save stsch
Using stsch on schids with ssid != 0 can lead to an operand
exception. Use stsch_err to handle potential exceptions
if we fail to reenable mss after hibernation.
Cc: <stable@kernel.org> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Sebastian Ott [Thu, 22 Apr 2010 15:17:03 +0000 (17:17 +0200)]
[S390] cio: allow enable_facility from outside init functions
Prepare chsc_enable_facility to be used from outside init functions.
Use static memory for the chsc call and protect its access by a
spinlock (although there is no concurrent usage).
Cc: <stable@kernel.org> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Stefan Haberland [Thu, 22 Apr 2010 15:17:02 +0000 (17:17 +0200)]
[S390] dasd: fix endless loop in erp
If not enough memory is available to build a new erp request it ended
up in an endless loop trying to build erp requests. Fixed the loop to
proceed the next request instead.
Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
[SCSI] bnx2i: Bug fixes related to MTU change issue when there are active iscsi sessions
[SCSI] ibmvscsi: fix DMA API misuse
[SCSI] wd7000: fix reset handler typo spin_unlock_irq() => spin_lock_irq()
[SCSI] zfcp: Fix tracing of requests with error status
[SCSI] zfcp: Update MAINTAINERS entry
[SCSI] iscsi_tcp: fix relogin/shutdown hang
[SCSI] qla2xxx: fix lock imbalance
[SCSI] lpfc: fix lock imbalances
[SCSI] be2iscsi: fix lock imbalance
[SCSI] dpt_i2o: several use after free issues
virtio: Fix GFP flags passed from the virtio balloon driver
The virtio balloon driver can dig into the reservation pools of the OS
to satisfy a balloon request. This is not advisable and other balloon
drivers (drivers/xen/balloon.c) avoid this as well.
The patch also adds changes to avoid printing a warning if allocation
fails, since we retry after sometime anyway.
Merge branch 'for-linus/i2c' of git://git.fluff.org/bjdooks/linux
* 'for-linus/i2c' of git://git.fluff.org/bjdooks/linux:
i2c-stu300: off by one issue
i2c-pnx: Add stop conditions for end of transfer
i2c-pnx: Limit maximum divider to 1023
i2c-omap: fix OOPS in omap_i2c_unidle() during probe
i2c-imx: fix error handling
Randy Dunlap [Wed, 21 Apr 2010 21:32:47 +0000 (14:32 -0700)]
staging: fix dt3155 build
When the dt3155 driver is built-in (not as a loadable module),
these build errors happen:
drivers/staging/dt3155/dt3155_drv.c:1047: error: implicit declaration of function 'request_irq'
drivers/staging/dt3155/dt3155_drv.c:1048: error: 'IRQF_SHARED' undeclared (first use in this function)
drivers/staging/dt3155/dt3155_drv.c:1048: error: 'IRQF_DISABLED' undeclared (first use in this function)
drivers/staging/dt3155/dt3155_drv.c:1091: error: implicit declaration of function 'free_irq'
so remove the #ifdef MODULE check since it's not needed. Also remove
the CONFIG_PCI check since the Kconfig file already requires that.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Scott Smedley <ss@aao.gov.au> Tested-by: Jan III Sobieski <jan3sobi3ski@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6:
security: testing the wrong variable in create_by_name()
CRED: Fix a race in creds_are_invalid() in credentials debugging
CRED: Fix double free in prepare_usermodehelper_creds() error handling
Dan Carpenter [Thu, 22 Apr 2010 10:05:35 +0000 (12:05 +0200)]
security: testing the wrong variable in create_by_name()
There is a typo here. We should be testing "*dentry" instead of
"dentry". If "*dentry" is an ERR_PTR, it gets dereferenced in either
mkdir() or create() which would cause an OOPs.
Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: James Morris <jmorris@namei.org>
David Howells [Wed, 21 Apr 2010 09:28:25 +0000 (10:28 +0100)]
CRED: Fix a race in creds_are_invalid() in credentials debugging
creds_are_invalid() reads both cred->usage and cred->subscribers and then
compares them to make sure the number of processes subscribed to a cred struct
never exceeds the refcount of that cred struct.
The problem is that this can cause a race with both copy_creds() and
exit_creds() as the two counters, whilst they are of atomic_t type, are only
atomic with respect to themselves, and not atomic with respect to each other.
This means that if creds_are_invalid() can read the values on one CPU whilst
they're being modified on another CPU, and so can observe an evolving state in
which the subscribers count now is greater than the usage count a moment
before.
Switching the order in which the counts are read cannot help, so the thing to
do is to remove that particular check.
I had considered rechecking the values to see if they're in flux if the test
fails, but I can't guarantee they won't appear the same, even if they've
changed several times in the meantime.
Note that this can only happen if CONFIG_DEBUG_CREDENTIALS is enabled.
The problem is only likely to occur with multithreaded programs, and can be
tested by the tst-eintr1 program from glibc's "make check". The symptoms look
like:
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
m68knommu: allow 4 coldfire serial ports
m68knommu: fix coldfire tcdrain
m68knommu: remove a duplicate vector setting line for 68360
Fix m68k-uclinux's rt_sigreturn trampoline
m68knommu: correct the CC flags for Coldfire M5272 targets
uclinux: error message when FLAT reloc symbol is invalid, v2
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6:
mc13783-regulator: fix a memory leak in mc13783_regulator_remove
regulator: Let drivers know when they use the stub API
Merge branch 'kvm-updates/2.6.34' of git://git.kernel.org/pub/scm/virt/kvm/kvm
* 'kvm-updates/2.6.34' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86: Fix TSS size check for 16-bit tasks
KVM: Add missing srcu_read_lock() for kvm_mmu_notifier_release()
KVM: Increase NR_IOBUS_DEVS limit to 200
KVM: fix the handling of dirty bitmaps to avoid overflows
KVM: MMU: fix kvm_mmu_zap_page() and its calling path
KVM: VMX: Save/restore rflags.vm correctly in real mode
KVM: allow bit 10 to be cleared in MSR_IA32_MC4_CTL
KVM: Don't spam kernel log when injecting exceptions due to bad cr writes
KVM: SVM: Fix memory leaks that happen when svm_create_vcpu() fails
KVM: take srcu lock before call to complete_pio()
David Howells [Wed, 21 Apr 2010 11:01:23 +0000 (12:01 +0100)]
AFS: Don't pass error value to page_cache_release() in error handling
In the error handling in afs_mntpt_do_automount(), we pass an error
pointer to page_cache_release() if read_mapping_page() failed. Instead,
we should extend the gotos around the error handling we don't need.
Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix tcdrain on coldfire uarts.
Currently with coldfire uarts tcdrain returns without waiting for txempty,
because (tx)fifosize is 0. Fix that and call uart_update_timeout when
setting the baud rate, otherwise tcdrain will wait for an half our :)
Also constify mcf_uart_ops.
Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Jun Sun [Fri, 1 Jan 2010 01:28:52 +0000 (17:28 -0800)]
uclinux: error message when FLAT reloc symbol is invalid, v2
This patch fixes a cosmetic error in printk. Text segment and data/bss
segment are allocated from two different areas. It is not meaningful to
give the diff between them in the error reporting messages.
Signed-off-by: Jun Sun <jsun@junsun.net> Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Author: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Date: Tue Mar 30 00:04:00 2010 +0100
Subject: CRED: Fix memory leak in error handling
attempts to fix a memory leak in the error handling by making the offending
return statement into a jump down to the bottom of the function where a
kfree(tgcred) is inserted.
This is, however, incorrect, as it does a kfree() after doing put_cred() if
security_prepare_creds() fails. That will result in a double free if 'error'
is jumped to as put_cred() will also attempt to free the new tgcred record by
virtue of it being pointed to by the new cred record.
Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: James Morris <jmorris@namei.org>
Joern Engel [Tue, 20 Apr 2010 19:44:10 +0000 (21:44 +0200)]
[LogFS] Split large truncated into smaller chunks
Truncate would do an almost limitless amount of work without invoking
the garbage collector in between. Split it up into more manageable,
though still large, chunks.
Jan Kara [Mon, 19 Apr 2010 14:47:20 +0000 (16:47 +0200)]
quota: Convert __DQUOT_PARANOIA symbol to standard config option
Make __DQUOT_PARANOIA define from the old days a standard config option
and turn it off by default.
This gets rid of a quota warning about writes before quota is turned on
for systems with ext4 root filesystem. Currently there's no way to legally
solve this because /etc/mtab has to be written before quota is turned on
on most systems.
Merge branch 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6
* 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6:
pcmcia: fix error handling in cm4000_cs.c
drivers/pcmcia: Add missing local_irq_restore
serial_cs: MD55x support (PCMCIA GPRS/EDGE modem) (kernel 2.6.33)
pcmcia: avoid late calls to pccard_validate_cis
pcmcia: fix ioport size calculation in rsrc_nonstatic
pcmcia: re-start on MFC override
pcmcia: fix io_probe due to parent (PCI) resources
pcmcia: use previously assigned IRQ for all card functions
Before commit e28cbf22933d0c0ccaf3c4c27a1a263b41f73859 ("improve
sys_newuname() for compat architectures") 64-bit x86 had a private
implementation of sys_uname which was just called sys_uname, which other
architectures used for the old uname.
Due to some merge issues with the uname refactoring patches we ended up
calling the old uname version for both the old and new system call
slots, which lead to the domainname filed never be set which caused
failures with libnss_nis.
Reported-and-tested-by: Andy Isaacson <adi@hexapodia.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch increases the current hardcoded limit of NR_IOBUS_DEVS
from 6 to 200. We are hitting this limit when creating a guest with more
than 1 virtio-net device using vhost-net backend. Each virtio-net
device requires 2 such devices to service notifications from rx/tx queues.
Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
KVM: MMU: fix kvm_mmu_zap_page() and its calling path
This patch fix:
- calculate zapped page number properly in mmu_zap_unsync_children()
- calculate freeed page number properly kvm_mmu_change_mmu_pages()
- if zapped children page it shoud restart hlist walking
Avi Kivity [Thu, 8 Apr 2010 15:19:35 +0000 (18:19 +0300)]
KVM: VMX: Save/restore rflags.vm correctly in real mode
Currently we set eflags.vm unconditionally when entering real mode emulation
through virtual-8086 mode, and clear it unconditionally when we enter protected
mode. The means that the following sequence
Ends up with rflags.vm clear due to KVM_SET_SREGS triggering enter_pmode().
Fix by shadowing rflags.vm (and rflags.iopl) correctly while in real mode:
reads and writes to those bits access a shadow register instead of the actual
register.
Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Andre Przywara [Wed, 24 Mar 2010 16:46:42 +0000 (17:46 +0100)]
KVM: allow bit 10 to be cleared in MSR_IA32_MC4_CTL
There is a quirk for AMD K8 CPUs in many Linux kernels (see
arch/x86/kernel/cpu/mcheck/mce.c:__mcheck_cpu_apply_quirks()) that
clears bit 10 in that MCE related MSR. KVM can only cope with all
zeros or all ones, so it will inject a #GP into the guest, which
will let it panic.
So lets add a quirk to the quirk and ignore this single cleared bit.
This fixes -cpu kvm64 on all machines and -cpu host on K8 machines
with some guest Linux kernels.
Signed-off-by: Andre Przywara <andre.przywara@amd.com> Signed-off-by: Avi Kivity <avi@redhat.com>
Jesse Barnes [Fri, 26 Mar 2010 18:07:16 +0000 (11:07 -0700)]
drm: delay vblank cleanup until after driver unload
Drivers may use vblank calls now (e.g. drm_vblank_off) in their unload
paths, so don't clean up the vblank related structures until after
driver unload.
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Kristian Høgsberg <krh@bitplanet.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
Kevin Wells [Tue, 16 Mar 2010 22:55:37 +0000 (15:55 -0700)]
i2c-pnx: Add stop conditions for end of transfer
Add a stop condition bit flag to the last byte in the transfer.
This will generate an extra clock to handle the stop condition
and prevent devices from staying in an ACK'd state.
Signed-off-by: Kevin Wells <wellsk40@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Kevin Wells [Tue, 16 Mar 2010 22:55:36 +0000 (15:55 -0700)]
i2c-pnx: Limit maximum divider to 1023
Limit maximum divider to 0x3ff to divider computations. On high I2C
parent clock rates, the divider can exceed 0x3ff. This will help
prevent some very odd clock rates.
Signed-off-by: Kevin Wells <wellsk40@gmail.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
Mika Westerberg [Tue, 23 Mar 2010 10:12:56 +0000 (12:12 +0200)]
i2c-omap: fix OOPS in omap_i2c_unidle() during probe
Commit d84d3ea317ce0db89ce0903b4037f800c5d4c477 added register shift to allow
also 16-bit register access. However, omap_i2c_unidle() is called before these
are set which causes the following OOPS:
Arnaud Patard [Tue, 23 Mar 2010 16:28:28 +0000 (17:28 +0100)]
i2c-imx: fix error handling
- Return -ETIMEDOUT on bus busy error
- Fix timeout test "time_after(jiffies, orig_jiffies + HZ / 1000)" :
By default, HZ=100 on arm. This means that this test has no chances to
work and may result in a dead loop. Set timeout to 500ms.
- Don't try to send a new message if we failed to transmit
previous one. This was preventing to recover from error on my system
Signed-off-by: Arnaud Patard <apatard@mandriva.com> Signed-off-by: Ben Dooks <ben-linux@fluff.org>
rmap: add exclusively owned pages to the newest anon_vma
The recent anon_vma fixes cause many anonymous pages to end up
in the parent process anon_vma, even when the page is exclusively
owned by the current process.
Adding exclusively owned anonymous pages to the top anon_vma
reduces rmap scanning overhead, especially in workloads with
forking servers.
This patch adds a parameter to __page_set_anon_rmap that can
be used to indicate whether or not the added page is exclusively
owned by the current process.
Pages added through page_add_new_anon_rmap are exclusively
owned by the current process, and can be added to the top
anon_vma.
Pages added through page_add_anon_rmap can be either shared
or exclusively owned, so we do the conservative thing and
add it to the oldest anon_vma.
A next step would be to add the exclusive parameter to
page_add_anon_rmap, to be used from functions where we do
know for sure whether a page is exclusively owned.
Signed-off-by: Rik van Riel <riel@redhat.com> Reviewed-by: Johannes Weiner <hannes@cmpxchg.org> Lightly-tested-by: Borislav Petkov <bp@alien8.de> Reviewed-by: Minchan Kim <minchan.kim@gmail.com>
[ Edited to look nicer - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6:
eCryptfs: Turn lower lookup error messages into debug messages
eCryptfs: Copy lower directory inode times and size on link
ecryptfs: fix use with tmpfs by removing d_drop from ecryptfs_destroy_inode
ecryptfs: fix error code for missing xattrs in lower fs
eCryptfs: Decrypt symlink target for stat size
eCryptfs: Strip metadata in xattr flag in encrypted view
eCryptfs: Clear buffer before reading in metadata xattr
eCryptfs: Rename ecryptfs_crypt_stat.num_header_bytes_at_front
eCryptfs: Fix metadata in xattr feature regression
Tyler Hicks [Thu, 25 Mar 2010 16:16:56 +0000 (11:16 -0500)]
eCryptfs: Turn lower lookup error messages into debug messages
Vaugue warnings about ENAMETOOLONG errors when looking up an encrypted
file name have caused many users to become concerned about their data.
Since this is a rather harmless condition, I'm moving this warning to
only be printed when the ecryptfs_verbosity module param is 1.
Tyler Hicks [Tue, 23 Mar 2010 23:09:02 +0000 (18:09 -0500)]
eCryptfs: Copy lower directory inode times and size on link
The timestamps and size of a lower inode involved in a link() call was
being copied to the upper parent inode. Instead, we should be
copying lower parent inode's timestamps and size to the upper parent
inode. I discovered this bug using the POSIX test suite at Tuxera.
Jeff Mahoney [Fri, 19 Mar 2010 19:35:46 +0000 (15:35 -0400)]
ecryptfs: fix use with tmpfs by removing d_drop from ecryptfs_destroy_inode
Since tmpfs has no persistent storage, it pins all its dentries in memory
so they have d_count=1 when other file systems would have d_count=0.
->lookup is only used to create new dentries. If the caller doesn't
instantiate it, it's freed immediately at dput(). ->readdir reads
directly from the dcache and depends on the dentries being hashed.
When an ecryptfs mount is mounted, it associates the lower file and dentry
with the ecryptfs files as they're accessed. When it's umounted and
destroys all the in-memory ecryptfs inodes, it fput's the lower_files and
d_drop's the lower_dentries. Commit 4981e081 added this and a d_delete in
2008 and several months later commit caeeeecf removed the d_delete. I
believe the d_drop() needs to be removed as well.
The d_drop effectively hides any file that has been accessed via ecryptfs
from the underlying tmpfs since it depends on it being hashed for it to
be accessible. I've removed the d_drop on my development node and see no
ill effects with basic testing on both tmpfs and persistent storage.
As a side effect, after ecryptfs d_drops the dentries on tmpfs, tmpfs
BUGs on umount. This is due to the dentries being unhashed.
tmpfs->kill_sb is kill_litter_super which calls d_genocide to drop
the reference pinning the dentry. It skips unhashed and negative dentries,
but shrink_dcache_for_umount_subtree doesn't. Since those dentries
still have an elevated d_count, we get a BUG().
This patch removes the d_drop call and fixes both issues.
This issue was reported at:
https://bugzilla.novell.com/show_bug.cgi?id=567887
Reported-by: Árpád Bíró <biroa@demasz.hu> Signed-off-by: Jeff Mahoney <jeffm@suse.com> Cc: Dustin Kirkland <kirkland@canonical.com> Cc: stable@kernel.org Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
projects / linux-beck.git / log