Arend van Spriel [Fri, 25 Feb 2011 15:39:12 +0000 (16:39 +0100)]
staging: brcm80211: remove unused module from softmac driver
The softmac driver contained an event queue mechanism which
was properly initialized and queried but no event are ever
posted to it. Therefor the module has been removed.
Reviewed-by: Roland Vossen <rvossen@broadcom.com> Reviewed-by: Brett Rudley <brudley@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Brett Rudley [Fri, 25 Feb 2011 15:39:10 +0000 (16:39 +0100)]
staging: brcm80211: Remove abstraction of pci_(alloc/free)_consistent
The abstraction for allocating and freeing dma descriptor memory
has been removed and replaced by usage of pci_alloc_consistent and
pci_free_consistent.
Reviewed-by: Roland Vossen <rvossen@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Brett Rudley [Fri, 25 Feb 2011 15:39:09 +0000 (16:39 +0100)]
staging: brcm80211: Remove abstractions for pci_(un)map_single
The driver had abstracted DMA mapping functions. As abstraction
is not required for the linux driver, these have been removed
and replaced by native linux functions.
Reviewed-by: Roland Vossen <rvossen@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Pavan Savoy [Thu, 24 Feb 2011 14:06:53 +0000 (08:06 -0600)]
staging: delete ti-st from staging
The 2 drivers originally staged, the core ti-st driver
and the btwilink bluetooth driver have now moved to relevant
directories, so deleting the ti-st/ from staging.
Jonathan Cameron [Mon, 28 Feb 2011 12:33:42 +0000 (12:33 +0000)]
staging:iio:gyro: adis16060 cleanup, move to abi and bug fixes.
Moved to standard sysfs naming and got rid of direct register writing from
userspace.
The rx and tx buffers are never used together so just have one and avoid
the need to malloc it by using putting it in the state structure and
using the ____cacheline_aligned trick.
A number of obvious bugs also fixed and correction of register address
defines in header which has now been squashed into the driver.
I don't have one of these so can't test. This is done off datasheet.
Note that the driver had parts that definitely wouldn't work before
this patch. Now it 'might' assuming I haven't messed up too badly.
I've left fixing the fact that you can only have one of these on a given
machine for another day.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Jonathan Cameron [Fri, 25 Feb 2011 16:09:07 +0000 (16:09 +0000)]
staging:iio:gyro: adis16080 cleanup, move to abi and bug fixes.
Moved to standard sysfs naming and got rid of direct register writing
from userspace.
The rx and tx buffers are never used together so just have one and
avoid the need to malloc it by using putting it in the state structure
and using the ____cacheline_aligned trick.
Couple of obvious bug fixes whilst I was here.
I don't have one of these so can't test. This is done off datasheet.
Note that as with the adis16060 driver there are parts that definitely
wouldn't work before this patch. Now it 'might' assuming I haven't
messed up too badly.
Signed-off-by: Jonathan Cameron <jic23@cam.ac.uk> Acked-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tomas Winkler [Mon, 28 Feb 2011 17:27:06 +0000 (19:27 +0200)]
staging/easycap: add first level indentation to easycap_main
Add first level indentation to easayca_main.c
This created around 300 lines over 80 characters.
Around 100 of straight forward once were fixed in this patch.
The another 200 require more code movement and need to be fixed
later
Cc: Mike Thomas <rmthomas@sciolus.org> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The first part of build_channel_array()identifies the number of enabled channels.
Further down this count is used to allocate the ci_array. The next section parses the
scan_elements directory again, and fills ci_array regardless if the channel is enabled or not.
So if less than available channels are enabled ci_array memory is overflowed.
This fix makes sure that we allocate enough memory. But the whole approach looks a bit
cumbersome to me. Why not allocate memory for MAX_CHANNLES, less say 64
(I never seen a part with more than that channels). And skip the first part entirely.
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
IIO: ADC: New driver for the AD7298 8-channel SPI ADC
This patch adds support for the
AD7298: 8-Channel, 1MSPS, 12-Bit SAR ADC with Temperature Sensor
via SPI bus.
This patch replaces the existing ad7298.c driver completely.
It was necessary since, the old driver did not comply with the
IIO ABI for such devices.
Changes since V1:
IIO: ADC: New driver for the AD7298 8-channel SPI ADC
Add documentation for new sysfs file tempX_input.
Simplify bit defines.
Remove outdated comments.
Fix indention style.
ad7298_show_temp():
Add locking.
Simplify temperature calculation.
Change temperature result from degrees into milli degrees Celsius.
Rename file according to new sysfs ABI documentation
This driver adds mouse support to the hyper-v subsystem.
The code was originally written by Citrix, modified heavily by Hank at
Microsoft, and then further by me, to get it to build properly due to
all of the recent hyperv changes in the tree.
At the moment, it is marked "BROKEN" as it has not been tested well, and
it will conflict with other api changes that KY is doing, which I will
fix up later in this driver.
It still needs lots of work, and normal "cleanup". I don't recommend
anyone running it on their machine unless they are very brave and know
how to debug kernel drivers in a hyperv system.
Signed-off-by: Hank Janssen <hjanssen@microsoft.com> Cc: K. Y. Srinivasan <kys@microsoft.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Nils Faerber [Sat, 26 Feb 2011 22:45:42 +0000 (23:45 +0100)]
Staging: samsung-laptop: fix brightness level and add new device ids
The patch is against the 2.6.37 drivers/staging/samsung-laptop
driver and implements some extra enhancements.
It fixes an issue that the brightness would not change the level at
once as well as and some other oddities. It was resolved by
reallocated the SABI memory reagion using the "nocache" option.
The patch also introduces a new set of supported netbook models,
especially the NC10plus which was used for testing this patch. This new
set of models also offer 9 instead of just 8 brightness levels so it
also introduces an additional parameter for the models struct so that
models can define their own brightness range.
Signed-off-by: Nils Faerber <nils.faerber@kernelconcepts.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
staging: IIO: ADC: New driver for AD7606/AD7606-6/AD7606-4
This patch adds support for the:
AD7606/AD7606-6/AD7606-4 8/6/4-Channel Data Acquisition
system (DAS) with 16-Bit, Bipolar, Simultaneous Sampling ADC.
Changes since V1:
IIO: ADC: New driver for AD7606/AD7606-6/AD7606-4: Apply review feedback
Rename sysfs node oversampling to oversampling_ratio.
Kconfig: Add GPIOLIB dependency.
Use range in mV to better match HWMON.
Rename ad7606_check_oversampling.
Fix various comments and style.
Reorder is_visible cases.
Use new gpio_request_one/array and friends.
Drop check for SPI max_speed_hz.
Changes since V2:
IIO: ADC: New driver for AD7606/AD7606-6/AD7606-4: Apply review feedback
Documentation: specify unit
Avoid raise condition in ad7606_scan_direct()
Check return value of bus ops read_block()
Changes since V3:
IIO: ADC: New driver for AD7606/AD7606-6/AD7606-4: Add missing include file
Add linux/sched.h
Changes since V4:
IIO: ADC: New driver for AD7606/AD7606-6/AD7606-4: Fix kconfig declaration
consistently use tristate to avoid configuration mismatches
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Acked-by: Jonathan Cameron <jic23@cam.ac.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Pavan Savoy [Mon, 21 Feb 2011 04:41:16 +0000 (22:41 -0600)]
Bluetooth: btwilink driver
This is the bluetooth protocol driver for the TI WiLink7 chipsets.
Texas Instrument's WiLink chipsets combine wireless technologies
like BT, FM, GPS and WLAN onto a single chip.
This Bluetooth driver works on top of the TI_ST shared transport
line discipline driver which also allows other drivers like
FM V4L2 and GPS character driver to make use of the same UART interface.
Kconfig and Makefile modifications to enable the Bluetooth
driver for Texas Instrument's WiLink 7 chipset.
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Chris Ball <cjb@laptop.org> Cc: Jon Nettleton <jon.nettleton@gmail.com> Acked-By: Andres Salomon <dilinger@queued.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
The cur_item variable from keyhelp.c is an index into a table of
messages. The following condition should always hold:
MSG_FUNCNAMES_START + cur_item <= MSG_FUNCNAMES_END.
The check in keyhelp.c was wrong. It allowed cur_item to be
incremented to an out-of-bounds value.
Signed-off-by: Christopher Brannon <chris@the-brannons.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Commit 1bd751c1abc1029e8a0ae63ef4f19357c735a2a3
("Staging: et131x: Clean up rxdma_csr") changed csr from bitfield to
u32, but failed to convert 2 uses of halt_status bit. It did:
- if (csr.bits.halt_status != 1)
+ if ((csr & 0x00020000) != 1)
which is wrong, because second version is always true.
Fix it.
This bug was found by coccinelle (http://coccinelle.lip6.fr/).
Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Acked-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
xgifb staging driver for XG20, XG21, XG40, XG42 frame buffer device
has a accelerator engine that never get used (XGIfb_accel is always 0).
Also the driver has a set of defines that hides the synchronization
mechanism used to access critical sections and a way to disable spinlocks
use at compile time.
In a earlier patch all the code that depends on the accelerator being active
was deleted because it was dead code. Since the only usage of this
synchronization defines were in that dead code, this patch removes all the
now unused spinlock conditional compilation logic.
Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com> Acked-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Earlier patch removed code that never got executed because it depended on
XGIfb_accel variable value to de distinct than 0. But this variable is
always 0 in current driver.
That dead code used a set of functions that not remains unused.
This patch removes these unused functions.
Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com> Acked-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
xgifb staging driver has code that dependens on XGIfb_accel != 0.
But as Dan Carpenter noticed, XGIfb_accel value is always 0 in current driver.
So there is code that never gets executed.
This patch removes this dead code.
Signed-off-by: Javier Martinez Canillas <martinez.javier@gmail.com> Acked-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tomas Winkler [Mon, 21 Feb 2011 14:09:55 +0000 (16:09 +0200)]
staging/easycap: use USB_SUBCLASS_AUDIOSTREAMING instead of 0x02
use USB_SUBCLASS_AUDIOSTREAMING constant from usb/audio.h
instead of 0x02
Cc: Mike Thomas <rmthomas@sciolus.org> Cc: Dan Carpenter <error27@gmail.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tomas Winkler [Mon, 21 Feb 2011 11:23:27 +0000 (13:23 +0200)]
staging/easycap: easycap_usb_probe: more indentation cleanups
Cc: Mike Thomas <rmthomas@sciolus.org> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tomas Winkler [Mon, 21 Feb 2011 11:23:26 +0000 (13:23 +0200)]
staging/easycap: revamp inputset population code
make inputset population to be more compact and readable
Cc: Mike Thomas <rmthomas@sciolus.org> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Tomas Winkler [Mon, 21 Feb 2011 11:23:25 +0000 (13:23 +0200)]
staging/easycap: fix style issues in easycap_usb_probe function
fix some code styles and drop too verbose printouts
and non relevant code
Cc: Mike Thomas <rmthomas@sciolus.org> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Reviewed-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Wed, 23 Feb 2011 11:48:53 +0000 (12:48 +0100)]
staging: brcm80211: added locks in wl_mac80211.c
Increasing robustness of the code, although no problem has been reported
in the field. Several code paths were unshielded for multi thread access.
Several lock acquisitions have been added to wl_mac80211.c
Signed-off-by: Roland Vossen <rvossen@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Brett Rudley <brudley@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Wed, 23 Feb 2011 11:48:52 +0000 (12:48 +0100)]
staging: brcm80211: removed locks around Mac80211 calls
A spinlock was acquired prior to calling the Mac80211 functions
ieee80211_wake_queues() and ieee80211_stop_queues() and Cfg80211 functions
wiphy_rfkill_set_hw_state() and wiphy_rfkill_start_polling().
This is not required and could even lead to instability. Therefore the locks
were removed.
Signed-off-by: Roland Vossen <rvossen@broadcom.com> Reviewed-by: Arend van Spriel <arend@broadcom.com> Reviewed-by: Brett Rudley <brudley@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Arend van Spriel [Tue, 22 Feb 2011 10:12:09 +0000 (11:12 +0100)]
staging: brcm80211: allow changing channel by mac80211 when associated
When associated on 5G the driver receives a probe request for 2G with
a 2G rate specified. The driver asserts as the operating band is still
5G when the probe request packet is given. Root cause was that ioctl
function did fail upon setting the channel as requested by mac80211
when we are associated.
Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Roland Vossen [Mon, 21 Feb 2011 08:07:12 +0000 (09:07 +0100)]
staging: brcm80211: bugfix for crash on heavy transmit traffic
With heavy transmit traffic, once in a while (range 15mins-1hr)
a tx packet was added to a full transmit queue. Under certain
conditions an other packet in the queue gets bumped to make room
for the new packet. This is not considered an error condition, but
normal operation. Despite that, there was an ASSERT(0) that caused
the driver to oops. The ASSERT(0) has been removed. Driver was tested
afterwards.
Signed-off-by: Roland Vossen <rvossen@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Nitin Gupta [Fri, 18 Feb 2011 22:33:18 +0000 (17:33 -0500)]
staging: Allow sharing xvmalloc for zram and zcache
Both zram and zcache use xvmalloc allocator. If xvmalloc
is compiled separately for both of them, we will get linker
error if they are both selected as "built-in". We can also
get linker error regarding missing xvmalloc symbols if zram
is not built.
So, we now compile xvmalloc separately and export its symbols
which are then used by both of zram and zcache.
Vipin Mehta [Sun, 20 Feb 2011 15:00:38 +0000 (07:00 -0800)]
staging: ath6kl: Eliminate cfg80211 warnings
Cancel the pending scan operation once the interface is going down to
avoid warnings from the cfg80211 module. Once the interface is down,
cfg80211 checks for any pending scan requests and dumps a warning if it
finds one. It expects the driver to abort any ongoing scan operation
once the driver detects that the interface is going down.
Dan Carpenter [Sun, 20 Feb 2011 12:49:08 +0000 (15:49 +0300)]
staging: ath6kl: cleanup in SEND_FRAME ioctl
The original code was written in a funny way where every statement was
part of else if blocks. I broke them up into separate statements by
adding breaks on failure conditions.
Alan Cox [Tue, 22 Feb 2011 14:27:58 +0000 (14:27 +0000)]
staging: gma500: Intel GMA500 staging driver
This is an initial staging driver for the GMA500. It's been stripped out
of the PVR drivers and crunched together from various bits of code and
different kernels.
Currently it's unaccelerated but still pretty snappy even compositing with
the frame buffer X server.
Lots of work is needed to rework the ttm and bo interfaces from being
ripped out and then 2D acceleration wants putting back for framebuffer and
somehow eventually via DRM.
There is no support for the parts without open source userspace (video
accelerators, 3D) as per kernel policy.
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Haiyang Zhang [Fri, 18 Feb 2011 23:05:52 +0000 (15:05 -0800)]
staging: hv: Remove unnecessary ASSERTs in netvsc_initialize()
These fields have been assigned in netvsc_drv_init() before calling
netvsc_initialize(), so there is no need to check them.
The ASSERTs were already commented out, and this patch removes
them.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com> Signed-off-by: K. Y. Srinivasan <kys@microsoft.com> Signed-off-by: Hank Janssen <hjanssen@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
projects / linux-beck.git / log