Staging: comedi: add kcomedilib to the tree

This adds the kcomedilib module

From: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: fix build error in comedilib.h

If anyone included this file, it would break the build.
This patch fixes the issue.

Cc: David Schleef <ds@schleef.org>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: fix checkpatch.pl errors in comedi_fops.c

There are still some >80 character lines in there, but
this catches the majority of the issues.

Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: David Schleef <ds@schleef.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: comedi: fix up a lot of checkpatch.pl warnings

Only clean up some of the easier ones in the .h files

Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Cc: David Schleef <ds@schleef.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: add comedi core

This adds the Comedi core to the staging tree.
This is a data acquision infrastructure for Linux, providing a common
interface for these types of drivers.

Taken directly from the comedi git tree, with only minor tweaks
by Greg to get it to build properly within the kernel tree.

From: David Schleef <ds@schleef.org>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Shawn Bohrer <shawn.bohrer@gmail.com>
Signed-off-by: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: benet: cleanup a check while posting rx buffers

This patch cleans up the way to check if there is enough space in the rx_q
while posting buffers.

Signed-off-by: Sathya Perla <sathyap@serverengines.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: benet: fix problems reported by checkpatch

Signed-off-by: Sathya Perla <sathyap@serverengines.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: benet: patch to use offsetof() instead of AMAP_BYTE_OFFSET()

Signed-off-by: Sathya Perla <sathyap@serverengines.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: benet: fix build error.

udelay() was not being defined properly, this patch fixes it.

Reported-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Subbu Seetharaman <subbus@serverengines.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: benet: fix build errors when CONFIG_NETPOLL is off

Signed-off-by: Sathya Perla <sathyap@serverengines.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: benet: patch to remove subdirectories

Here's a patch tp remove the subdirectories in staging/benet (1st item in
staging/benet/TODO).

Signed-off-by: Sathya Perla <sathyap@serverengines.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: benet: build is broken unless CONFIG_NETPOLL is enabled

So disable the driver in that build situation and document
that this needs to be fixed.

Cc: Subbu Seetharaman <subbus@serverengines.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: benet: fix up netdev->priv change

netdev->priv is now gone, so fix up all of the build errors in the benet
driver due to this change.

Cc: Subbu Seetharaman <subbus@serverengines.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: benet: fix netif api breakage

The netif_rx_complete() and netif_rx_schedule() functions have changed,
so fix up the build breakage in the benet driver.

Cc: Subbu Seetharaman <subbus@serverengines.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: Add ServerEngines benet 10Gb ethernet driver

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2860: enable WPA_SUPPLICANT support

This is needed in order to get NetworkManager to work properly
with this driver.

More details can be found at
https://bugzilla.novell.com/show_bug.cgi?id=437959

Cc: Helmut Schaa <hschaa@novell.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2860: Fix minor compiler warnings

The build is "clean" now for this driver.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2860: use standard bit-reverse function

Make the rt2860 use standard bit-reversing functions

Signed-off by: J.R. Mauro <jrm8005@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2860: fix up netdev->priv usage

Now that netdev->priv is removed, fix the driver to use netdev->ml_priv
like it always should have been doing.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: rt2860: disable root hack for reading files

We are now using credentials, so just blindly setting the fsuid and
fsguid isn't acceptable.  All this means is that the config file needs
to be readable by the driver thread, not a big deal.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: add rt2860 wireless driver

This is the Ralink RT2860 driver from the company that does horrible
things like reading a config file from /etc.  However, the driver that
is currently under development from the wireless development community
is not working at all yet, so distros and users are using this version
instead (quite common hardware on a lot of netbook machines).

So here is this driver, for now, until the wireless developers get a
"clean" version into the main tree, or until this version is cleaned up
sufficiently to move out of the staging tree.

Ported to the Linux build system and cleaned up a bit already by me.

Cc: Linux wireless <linux-wireless@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: otus: remove dependence on kernel version

Dependence on kernel version is not needed anymore
if we are in mainline now.

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Cc: <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: otus: fix urb callback function type

The #ifdef for version checking is wrong, and we no longer
pass the struct pt_regs to the urb callback functions.  This
patch fixes this error.

Cc: Luis Rodriguez <Luis.Rodriguez@Atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: otus: fix name clash

Make p80211wext_handler_def in the otus driver static. It's not used outside
this file and causes name clashes if it's visible.

Signed-off by: J.R. Mauro <jrm8005@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: otus: fix netdev->priv usage

Now that netdev->priv is gone, fix things up properly in the otus driver
to use ml_priv as it should have always been doing.

Cc: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: add otus Atheros wireless network driver

Initial dump of the otus USB wireless network driver.
It builds properly, but a lot of work needs to be done cleaning
it up before it can be merged into the wireless driver tree.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: agnx: fix build warnings

Fix some minor build warnins in the agnx driver

Cc: Li YanBo <dreamfly281@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: agnx: fix build errors due to rate control API changes

In commit e6a9854b05c1a6af1308fe2b8c68f35abf28a3ee, the rate control API
was rewritten, so make the needed changes to the agnx driver so that it
will build and work properly.

Cc: Li YanBo <dreamfly281@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: agnx: fix build errors due to ssid removal

The wireless core has removed the ssid variables, so also remove
them from the agnx driver so that it builds properly.

Cc: Li YanBo <dreamfly281@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: add agnx wireless driver

This driver is for the Airgo AGNX00 wireless chip.

From: Li YanBo <dreamfly281@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: slicoss: use request_firmware

This should make the driver use request_firmware() instead of a static
firmware.
Some obvious things are missing:
1) The unneeded header files are not removed yet. This is to keep the
   patch size small.
2) The .bin files are missing so the driver doesn't have what to load.
3) Testing. None of this was tested. It does compiles OK though :)

Signed-off-by: Lior Dotan <liodot@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: slicoss: use correct type for memory allcations

Fix sizeof to use the right type

Signed-off-by: Lior Dotan <liodot@gmail.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: slicoss: use kzalloc

This patch uses kzalloc() where really applicable.

Signed-off-by: Lior Dotan <liodot@gmail.com>
Cc: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: usbip: cleanup kerneldoc

No argument named @regs in stub_complete(), remove it.

Signed-off-by: Qinghuang Feng <qhfeng.kernel@gmail.com>
Cc: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: et131x: remove unused variable in et1310_tx.c

The 'pPacket' variable is assigned, but never used. Remove it.

Signed-off-by: Johann Felix Soden <johfel@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: et131x: fix build failure

Fix build failure in et131x driver - missing \ in multiline macro

Signed-off by: J.R. Mauro <jrm8005@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: et131x: Cleanup et131x_debug.h defines

This patch cleans up the et131x_debug.h defines as well as fix the
checkpatch warnings

Signed-off-by: Stoyan Gaydarov <stoyboyker@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: go7007: add some more v4l2 ioctls

Now that the v4l2 tree is merged with mainline, enable some of
the compiled out functions.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: go7007: small cleanup

small cleanup of go7007:

- prepare for urb->status conversion
- micro optimization
- use kzalloc
- fix free of memory in use in go7007_usb_disconnect

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Cc: Cohen <rcohen@snurgle.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: go7007: fix minor build warnings

Comment out some functions that we aren't using yet, in anticipation
of using them when the v4l core merges are changed upstream.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: go7007: annotate code pointers

They are treated as __le16 everywhere, annotate as such.

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: go7007: Convert driver to use video_ioctl2

go7007: Convert driver to use video_ioctl2

go7007 driver were using the old method of having a big switch for handling
ioctls. Use instead the new video_ioctl2 method.

This patch also adds support for the 2.6.19 new ioctls to enumberate video
formats and intervals.

Still lacking the implementation of compression ioctls needed on go7007.

This patch weren't tested, due to the lack of a hardware with me.

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: go7007: add sensoray 2250/2251 support

This is the driver for the Sensoray 2250/2251 USB devices added to
go7007 driver.

Signed-off-by: Pete Eberlein <pete@sensoray.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: go7007: saa7134 updates

- Added documentation including README files from the original go7007
  driver package.
- Added Video4Linux2 MPEG controls.
- Added Video4Linux2 audio ioctls, which pass thru to the i2c driver.
- Improved saa7134 interface, to pass thru controls and video settings.
- Fixed a bug in sony tuner, as reported by Bifferos on the Go7007 wiki.

Signed-off-by: Pete Eberlein <pete@sensoray.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: echo: Lindent drivers/staging/echo

Lindent drivers/staging/echo

Signed-off by: J.R. Mauro <jrm8005@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: echo: remove typedefs

Remove typedefs in drivers/staging/echo

Signed-off by: J.R. Mauro <jrm8005@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

staging: struct device - replace bus_id with dev_name(), dev_set_name()

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: sxg: update README

Update readme in drivers/staging/sxg

Signed-off by: J.R. Mauro <jrm8005@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: sxg: break the build in a cleaner way when !x86

Remove ugly 'Stop Comilation;' statement in sxghif, replace with an
error macro.

This should never be hit as we are only building for x86 boxes at the
moment.

Signed-off by: J.R. Mauro <jrm8005@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: sxg: remove typedefs

Remove typedefs in the sxg driver

Signed-off by: J.R. Mauro <jrm8005@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: poch: Fine grained locking

Lock only the portion of code that does register access.

Signed-off-by: Vijay Kumar <vijaykumar@bravegnu.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: poch: Fix user space protocol syncing

Always set the user space offset from kernel space, to indicate group
transmitted/received.

Signed-off-by: Vijay Kumar <vijaykumar@bravegnu.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: poch: Rx control register init

Added Rx control register definition. Flush Rx FIFO on init, and set
continuous DMA mode.

Signed-off-by: Vijay Kumar <vijaykumar@bravegnu.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: poch: Fix build warnings

Removed out printing of DMA address, that causes warnings during
build.

Signed-off-by: Vijay Kumar <vijaykumar@bravegnu.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: poch: minor fixes

Unmap PCI bars on remove().
Validate sysfs values before using them.

Signed-off-by: Vijay Kumar <vijaykumar@bravegnu.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: poch: Correct pages from bytes.

Accurately calculate the no. of pages from the bytes.

Signed-off-by: Vijay Kumar <vijaykumar@bravegnu.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: poch: Update TODO list

Update TODO list.

Signed-off-by: Vijay Kumar <vijaykumar@bravegnu.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: poch: Block size bug fix

Block size is to be expressed in no. of 64 bit transfers. But the code
specifies the block size in bytes. Fix this issue.

Signed-off-by: Vijay Kumar <vijaykumar@bravegnu.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: at76_usb: cleanup dma on stack issues

- no DMA on stack
- cleanup unclear endianness issue

Signed-off-by: Oliver Neukum <oneukum@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: at76_usb: fix up all remaining checkpatch.pl warnings

It's now a "clean" driver.

Cc: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: at76_usb: remove compiler warnings

3 functions are now not used, remove them.

Cc: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: at76_usb: fix build breakage

The previous patch broke the at76_usb driver due to some other
wireless core api changes.  This patch fixes the driver to build
properly again.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: at76_usb: update drivers/staging/at76_usb w/ mac80211 port

This updates drivers/staging/at76_usb to correspond with the latest
version previously available in wireless-testing.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: wlan-ng: skb_p80211_to_ether() - payload_length is unsigned, check before subtraction

payload_length is unsigned, check before subtraction

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>

Staging: wlan-ng: fix compiler warnings

This fixes some compiler warnings in teh wlan-ng driver.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: wlan-ng: p80211wext.c: use ARRAY_SIZE

ARRAY_SIZE is more concise to use when the size of an array is divided by
the size of its type or the size of its first element.

The semantic patch that makes this change is as follows:
(http://www.emn.fr/x-info/coccinelle/)

// <smpl>
@i@
@@

#include <linux/kernel.h>

@depends on i using "paren.iso"@
type T;
T[] E;
@@

- (sizeof(E)/sizeof(E[...]))
+ ARRAY_SIZE(E)

@depends on i using "paren.iso"@
type T;
T[] E;
@@

- (sizeof(E)/sizeof(T))
+ ARRAY_SIZE(E)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: wlan-ng: remove unused #include <version.h>

The file(s) below do not use LINUX_VERSION_CODE nor KERNEL_VERSION.
  drivers/staging/wlan-ng/p80211conv.c
  drivers/staging/wlan-ng/p80211req.c
  drivers/staging/wlan-ng/p80211wext.c
  drivers/staging/wlan-ng/prism2mgmt.c

This patch removes the said #include <version.h>.

Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: wlan-ng: p80211conv.c copy code from wlan-ng-devel branch to not drop packets

allow card to correctly receive network packets,
without this change all incoming packets are dropped.
code copied from the latest wlan-ng-devel tree.

Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: wlan-ng: hfa384x_usbin_callback: check for hardware removed

hfa384x_usbin_callback: check for hardware removed

copied from latest wlan-ng-devel version

Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: wlan-ng: p80211wext don't set default key id twice

p80211wext don't set default key id twice

another change from wlan-ng-devel

Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: wlan-ng: p80211wext.c add latest changes & remove extra nulls from wext_handlers

add the latest changes from wlan-ng-devel
remove 2 stray nulls from the wext_handler table introduced
by the tidy up patch.

Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: wlan-ng: hfa384x_usb.c use newest version of 384x_drvr_start

include the needed fixes from Karl Relton
<karllinuxtest.relton@ntlworld.com>

see thread on linux-wlan-devel mailing list
"Possible cause of those pesky hfa384x_usbctlx_complete_sync errors"

Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Cc: Karl Relton <karllinuxtest.relton@ntlworld.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: wlan-ng: prism2_usb.c always enable the card in probe_usb

always enable card in probe_usb
& update register_wlandev to match latest wlan-ng-dev tree.

Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: wlan-ng: p80211netdev.c fix netdev alloc to prevent oops on device start

a version of this patch is in the wlan-ng_devel tree

initializes netdev correctly to prevent an oops on device start.

Signed-off-by: Richard Kennedy <richard@rsk.demon.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: wlan-ng: Purge all MIBs not used internally.

The next step is to bypass the MIB calling mechanism altogether and just
invoke the hardware directly where needed, but at least now the list has
been paired down considerably.

Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: wlan-ng: Consolidate wlan-ng into a single module.

There's no point in having a separate 'p80211' module, as nobody else is
ever going to use it.  Push everyting into a single module, and get rid
of all exports.

Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: wlan-ng: Delete a pile of unused mibs. And fix WEXT SET_TXPOWER.

Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: wlan-ng: Delete a large pile of now-unused code.

Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: wlan-ng: use WIRELESS_EXT, not CONFIG_WIRELESS_EXT

Kconfig doesn't work with variables starting with CONFIG_

Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: wlan-ng: Wireless Extension support is mandatory.

So take away the option to disable it.

Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: wlan-ng: Eliminate all backwards-compatible kernel code.

It's not needed at all anymore now that we are in the kernel tree.

Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: wlan-ng: Use standard kernel integer (u32/s32/etc) types.

wlan-ng needed to interact with userspace, and support very old kernels,
so it used to define its own types for integers to ensure consistency.

It's all rather irrelevant now.

Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: wlan-ng: Eliminate usage of procfs.

These files are not needed to work properly, and don't belong in procfs

Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: wlan-ng: Eliminate local 'version.h'

The kernel provides us with the proper version of this file.

Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: wlan-ng: Eliminate one more rx mtu test.

It also isn't needed.

Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: wlan-ng: Get rid of the MTU tests in the rx conversion path.

They are not needed.

Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: wlan-ng: Remove AP-only code from MLME functions.

It is not needed in this driver.

Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: wlan-ng: Eliminate a boatload of tertiaryAP-only code.

Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: wlan-ng: Eliminate all backwards-compatibility for <2.6.13 kernels.

Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: wlan-ng: Eliminate more <2.6 kernel support.

Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: wlan-ng: Make wlan-ng use WEXT mode by default.

As this is the kernel default mode.

Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: wlan-ng: Delete PCI/PLX/PCMCIA-specific code.

Also delete a large pile of code that existed to support <2.6 kernels.

Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: wlan-ng: Update Help text to mention prism3 devices.

The driver also supports prism3 devices

Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: wlan-ng: Remove PCI/PLX/PCMCIA files.

This portion of the driver is not needed at all, so remove it.

Signed-off-by: Solomon Peachy <pizza@shaftnet.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: w35und: fix config build warnings

the wireless config function has changed with commit
e8975581f63870be42ff4662b293d1b0c8c21350 so fix up the wbusb driver to
work properly with that change.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: w35und: fix Kconfig

4KSTACK dependency was needed when driver carried its own softmac
layer. That layer is gone, and functions have reasonably small stack
footprint -> dependency can be removed.

Add better description of hardware this driver is targetted at (now
with fixed whitespace)

Signed-off-by: Pavel Machek <pavel@suse.cz>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: w35und: remove rxisr.c as dead code

The vRxTimerStart() function is never called nor does the timer do anything
useful so remove the code.

Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: w35und: remove dead code from wbhal.c

Remove tons of unused code from wbhal.c.

Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: w35und: make functions local to wb35tx.c static

While there are no functional changes, the diff is quite large because we need
to shuffle code around to avoid forward declarations.

Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

Staging: w35und: make functions local to wb35rx.c static

While there are no functional changes, the diff is quite large because we need
to shuffle code around to avoid forward declarations.

Acked-by: Pavel Machek <pavel@suse.cz>
Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>