Anil Belur [Thu, 19 Jun 2014 15:02:08 +0000 (01:02 +1000)]
staging: lustre: ldlm: ldlm_resource.c replace obsolete function with kstrtoul()
- this change fixes the warning "WARNING: simple_strtoul is obsolete, use
kstrtoul instead"
- removed the unused var 'end' as this is no longer required for
kstrtoul()
Paul Bolle [Wed, 18 Jun 2014 15:05:47 +0000 (17:05 +0200)]
staging: Remove useless "default N" lines
Two Kconfig entries default to (uppercase) "N". It was clearly intended
to use "default n". But since (lowercase) "n" is the default anyway,
these lines might as well be removed.
Reported-by: Martin Walch <walch.martin@web.de> Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Wolfgang Ocker [Sun, 15 Jun 2014 11:03:29 +0000 (13:03 +0200)]
staging cxt1e1: refactored ring buffer dump functions to avoid sparse warnings
Sparse spit out these warnings:
drivers/staging/cxt1e1/musycc.c:68:1: warning: context imbalance in 'musycc_dump_rxbuffer_ring' - different lock contexts for basic block
drivers/staging/cxt1e1/musycc.c:136:1: warning: context imbalance in 'musycc_dump_txbuffer_ring' - different lock contexts for basic block
The new functions musycc_dump_[rt]xbuffer_ring_locked() assume that the lock is
held. musycc_dump_[rt]xbuffer_ring() take the lock.
Signed-off-by: Wolfgang Ocker <weo@weo1.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: line6: do not return 0 from probe if no initialization done
There is a strange "return 0" in line6_probe() before any initialization of
the module is done. It can lead to NULL pointer dereference in other functions.
The patch proposes to return -ENODEV in this case.
Found by Linux Driver Verification project (linuxtesting.org).
Using an 'if()' inside of an 'extern inline' function causes
a gcc warning when CONFIG_PROFILE_ALL_BRANCHES is set every
time the function is called, which gets very noisy:
In file included from /git/arm-soc/drivers/staging/wlags49_h2/wl_wext.c:73:0:
drivers/staging/wlags49_h2/wl_internal.h:1035:216: warning: '______f' is static but declared in inline function 'wl_act_int_off' which is not static [enabled by default]
if(lp->is_handling_int == WL_HANDLING_INT) {
Fortunately there is a trivial workaround, so we can avoid
the problem by making the functions in question 'static inline'
rather than 'extern inline'.
Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Henk de Groot <pe1dnn@amsat.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Thu, 5 Jun 2014 20:48:11 +0000 (22:48 +0200)]
staging: lirc: remove sa1100 support
The LIRC support for sa1100 appears to have never worked
because it relies on header files that have never been
present in git history. Actually trying to build the
driver on an ARM sa1100 kernel fails, so let's just remove
the broken support.
Arnd Bergmann [Thu, 5 Jun 2014 20:48:13 +0000 (22:48 +0200)]
staging: sn9c102 depends on USB
If the USB code is a loadable module, this driver cannot
be built-in. This adds an explicit dependency on CONFIG_USB
so that Kconfig can force sn9c102 to be a module in this case.
staging: skein: fix sparse warning for static arrays
This patch fixes the following sparse warnings:
skein_iv.h:23:11: warning: symbol 'SKEIN_256_IV_128' was not declared. Should it be static?
skein_iv.h:31:11: warning: symbol 'SKEIN_256_IV_160' was not declared. Should it be static?
skein_iv.h:39:11: warning: symbol 'SKEIN_256_IV_224' was not declared. Should it be static?
skein_iv.h:47:11: warning: symbol 'SKEIN_256_IV_256' was not declared. Should it be static?
skein_iv.h:55:11: warning: symbol 'SKEIN_512_IV_128' was not declared. Should it be static?
skein_iv.h:67:11: warning: symbol 'SKEIN_512_IV_160' was not declared. Should it be static?
skein_iv.h:79:11: warning: symbol 'SKEIN_512_IV_224' was not declared. Should it be static?
skein_iv.h:91:11: warning: symbol 'SKEIN_512_IV_256' was not declared. Should it be static?
skein_iv.h:103:11: warning: symbol 'SKEIN_512_IV_384' was not declared. Should it be static?
skein_iv.h:115:11: warning: symbol 'SKEIN_512_IV_512' was not declared. Should it be static?
skein_iv.h:127:11: warning: symbol 'SKEIN_1024_IV_384' was not declared. Should it be static?
skein_iv.h:147:11: warning: symbol 'SKEIN_1024_IV_512' was not declared. Should it be static?
skein_iv.h:167:11: warning: symbol 'SKEIN_1024_IV_1024' was not declared. Should it be static?
by declaring the initialization vectors in question as static. The header
skein_iv.h is only included by skein.c
Signed-off-by: James A Shackleford <shack@linux.com> Acked-by: Jason Cooper <jason@lakedaemon.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Marcus Farkas [Sun, 1 Jun 2014 15:18:26 +0000 (17:18 +0200)]
staging: rtl8821ae: fix sparse warning for static declarations
This commit fixes the following sparse warnings in ps.c:
- 702: warning: symbol 'rtl_p2p_noa_ie' was not declared. Should it be static?
- 802: warning: symbol 'rtl_p2p_action_ie' was not declared. Should it be static?
Signed-off-by: Marcus Farkas <marcus.farkas@finitebox.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Arnd Bergmann [Thu, 5 Jun 2014 20:48:15 +0000 (22:48 +0200)]
staging: rtl8712, rtl8712: avoid lots of build warnings
The rtl8712 driver has an 'extern inline' function that contains an
'if', which causes lots of warnings with CONFIG_PROFILE_ALL_BRANCHES
overriding the definition of 'if':
drivers/staging/rtl8712/ieee80211.h:759:229: warning: '______f' is static but declared in inline function 'ieee80211_get_hdrlen' which is not static [enabled by default]
This changes the driver to use 'static inline' instead, which happens
to be the correct annotation anyway.
The net device only exists when firmware is loaded successfully.
Firmware presence variable is only used through r871xu_dev_remove() and
this function already checks for net device existence.
Signed-off-by: Thomas Vegas <thomas@grouk.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Thomas Vegas [Sun, 1 Jun 2014 12:34:39 +0000 (14:34 +0200)]
staging: rtl8712: Fix oops on dongle removal if firmware is not available
When firmware is not available, net device is not created. Upon
disconnect, we must check for net device existence before trying to
release net device private data.
Signed-off-by: Thomas Vegas <thomas@grouk.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: vt6655: fix sparse warning for static declarations
This patch fixes the following sparse warnings:
iwctl.c:76:22: warning: symbol 'iwctl_get_wireless_stats' was not declared. Should it be static?
iwctl.c:118:5: warning: symbol 'iwctl_giwname' was not declared. Should it be static?
iwctl.c:131:5: warning: symbol 'iwctl_siwscan' was not declared. Should it be static?
iwctl.c:192:5: warning: symbol 'iwctl_giwscan' was not declared. Should it be static?
iwctl.c:344:5: warning: symbol 'iwctl_siwfreq' was not declared. Should it be static?
iwctl.c:390:5: warning: symbol 'iwctl_giwfreq' was not declared. Should it be static?
iwctl.c:420:5: warning: symbol 'iwctl_siwmode' was not declared. Should it be static?
iwctl.c:486:5: warning: symbol 'iwctl_giwmode' was not declared. Should it be static?
iwctl.c:520:5: warning: symbol 'iwctl_giwrange' was not declared. Should it be static?
iwctl.c:626:5: warning: symbol 'iwctl_siwap' was not declared. Should it be static?
iwctl.c:684:5: warning: symbol 'iwctl_giwap' was not declared. Should it be static?
iwctl.c:711:5: warning: symbol 'iwctl_giwaplist' was not declared. Should it be static?
iwctl.c:784:5: warning: symbol 'iwctl_siwessid' was not declared. Should it be static?
iwctl.c:893:5: warning: symbol 'iwctl_giwessid' was not declared. Should it be static?
iwctl.c:923:5: warning: symbol 'iwctl_siwrate' was not declared. Should it be static?
iwctl.c:1004:5: warning: symbol 'iwctl_giwrate' was not declared. Should it be static?
iwctl.c:1049:5: warning: symbol 'iwctl_siwrts' was not declared. Should it be static?
iwctl.c:1077:5: warning: symbol 'iwctl_giwrts' was not declared. Should it be static?
iwctl.c:1096:5: warning: symbol 'iwctl_siwfrag' was not declared. Should it be static?
iwctl.c:1123:5: warning: symbol 'iwctl_giwfrag' was not declared. Should it be static?
iwctl.c:1141:5: warning: symbol 'iwctl_siwretry' was not declared. Should it be static?
iwctl.c:1176:5: warning: symbol 'iwctl_giwretry' was not declared. Should it be static?
iwctl.c:1205:5: warning: symbol 'iwctl_siwencode' was not declared. Should it be static?
iwctl.c:1336:5: warning: symbol 'iwctl_giwencode' was not declared. Should it be static?
iwctl.c:1398:5: warning: symbol 'iwctl_siwpower' was not declared. Should it be static?
iwctl.c:1448:5: warning: symbol 'iwctl_giwpower' was not declared. Should it be static?
iwctl.c:1478:5: warning: symbol 'iwctl_giwsens' was not declared. Should it be static?
iwctl.c:1502:5: warning: symbol 'iwctl_siwauth' was not declared. Should it be static?
iwctl.c:1603:5: warning: symbol 'iwctl_giwauth' was not declared. Should it be static?
iwctl.c:1611:5: warning: symbol 'iwctl_siwgenie' was not declared. Should it be static?
iwctl.c:1644:5: warning: symbol 'iwctl_giwgenie' was not declared. Should it be static?
iwctl.c:1669:5: warning: symbol 'iwctl_siwencodeext' was not declared. Should it be static?
iwctl.c:1783:5: warning: symbol 'iwctl_giwencodeext' was not declared. Should it be static?
iwctl.c:1791:5: warning: symbol 'iwctl_siwmlme' was not declared. Should it be static?
iwctl.c:1900:21: warning: symbol 'iwctl_private_args' was not declared. Should it be static?
iwctl.c:1906:33: warning: symbol 'iwctl_handler_def' was not declared. Should it be static?
Signed-off-by: James A Shackleford <shack@linux.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: vt6655: update out-of-date function declaration
The function iwctl_siwscan() is defined in iwctl.c as:
int iwctl_siwscan(struct net_device *dev,
struct iw_request_info *info,
struct iw_point *wrq,
char *extra)
{
...
This patch updates iwctl.h so that the type of the 3rd parameter (*wqr) in the
function declaration matches the definition.
Signed-off-by: James A Shackleford <shack@linux.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: vt6655: fix sparse warning for static declarations
This patch fixes the following sparse warnings:
dpc.c:65:21: warning: symbol 'acbyRxRate' was not declared. Should it be static?
dpc.c:272:9: warning: symbol 'MngWorkItem' was not declared. Should it be static?
dpc.c:288:1: warning: symbol 'device_receive_frame' was not declared. Should it be static?
Signed-off-by: James A Shackleford <shack@linux.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: vt6655: fix sparse warning "cast removes address space of expression"
Add missing __user macro to second parameter of ethtool_ioctl().
This removes the need for the offending (void *) cast of the user space pointer
rq->ifr_data.
Signed-off-by: James A Shackleford <shack@linux.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / linux-beck.git / log