]> git.karo-electronics.de Git - karo-tx-linux.git/log
karo-tx-linux.git
14 years agoInput: i8042 - add Gigabyte Spring Peak to dmi_noloop_table
Kamal Mostafa [Mon, 19 Jul 2010 18:00:52 +0000 (11:00 -0700)]
Input: i8042 - add Gigabyte Spring Peak to dmi_noloop_table

commit 3e1bbc8d5018a05c0793c8a32b777a1396eb4414 upstream.

Gigabyte "Spring Peak" notebook indicates wrong chassis-type, tripping up
i8042 and breaking the touchpad.  Add this model to i8042_dmi_noloop_table[]
to resolve.

BugLink: https://bugs.launchpad.net/bugs/580664
Signed-off-by: Kamal Mostafa <kamal@canonical.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoIPoIB: Fix world-writable child interface control sysfs attributes
Or Gerlitz [Sun, 6 Jun 2010 04:59:16 +0000 (04:59 +0000)]
IPoIB: Fix world-writable child interface control sysfs attributes

commit 7a52b34b07122ff5f45258d47f260f8a525518f0 upstream.

Sumeet Lahorani <sumeet.lahorani@oracle.com> reported that the IPoIB
child entries are world-writable; however we don't want ordinary users
to be able to create and destroy child interfaces, so fix them to be
writable only by root.

Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agox86: Fix x2apic preenabled system with kexec
Yinghai Lu [Thu, 15 Jul 2010 07:00:59 +0000 (00:00 -0700)]
x86: Fix x2apic preenabled system with kexec

commit fd19dce7ac07973f700b0f13fb7f94b951414a4c upstream.

Found one x2apic system kexec loop test failed
when CONFIG_NMI_WATCHDOG=y (old) or CONFIG_LOCKUP_DETECTOR=y (current tip)

first kernel can kexec second kernel, but second kernel can not kexec third one.

it can be duplicated on another system with BIOS preenabled x2apic.
First kernel can not kexec second kernel.

It turns out, when kernel boot with pre-enabled x2apic, it will not execute
disable_local_APIC on shutdown path.

when init_apic_mappings() is called in setup_arch, it will skip setting of
apic_phys when x2apic_mode is set. ( x2apic_mode is much early check_x2apic())
Then later, disable_local_APIC() will bail out early because !apic_phys.

So check !x2apic_mode in x2apic_mode in disable_local_APIC with !apic_phys.

another solution could be updating init_apic_mappings() to set apic_phys even
for preenabled x2apic system. Actually even for x2apic system, that lapic
address is mapped already in early stage.

BTW: is there any x2apic preenabled system with apicid of boot cpu > 255?

Signed-off-by: Yinghai Lu <yinghai@kernel.org>
LKML-Reference: <4C3EB22B.3000701@kernel.org>
Acked-by: Suresh Siddha <suresh.b.siddha@intel.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoASoC: Remove duplicate AUX definition from WM8776
Mark Brown [Sat, 17 Jul 2010 13:20:17 +0000 (14:20 +0100)]
ASoC: Remove duplicate AUX definition from WM8776

commit 3c0709396df0869786f83e4b2d2d687c70ee886d upstream.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agosdhci-s3c: add missing remove function
Marek Szyprowski [Tue, 20 Jul 2010 20:24:33 +0000 (13:24 -0700)]
sdhci-s3c: add missing remove function

commit 9d51a6b2487724e8713cd2794cf09ffeee5f6932 upstream.

System will crash sooner or later once the memory with the code of the
s3c-sdhci.ko module is reused for something else. I really have no idea
how the lack of remove function went unnoticed into the mainline code.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoethtool: Fix potential kernel buffer overflow in ETHTOOL_GRXCLSRLALL
Ben Hutchings [Mon, 28 Jun 2010 08:44:07 +0000 (08:44 +0000)]
ethtool: Fix potential kernel buffer overflow in ETHTOOL_GRXCLSRLALL

commit db048b69037e7fa6a7d9e95a1271a50dc08ae233 upstream.

On a 32-bit machine, info.rule_cnt >= 0x40000000 leads to integer
overflow and the buffer may be smaller than needed.  Since
ETHTOOL_GRXCLSRLALL is unprivileged, this can presumably be used for at
least denial of service.

Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agortc: fix ds1388 time corruption
Joakim Tjernlund [Tue, 29 Jun 2010 22:05:34 +0000 (15:05 -0700)]
rtc: fix ds1388 time corruption

commit 96fc3a45ea073136566f3c2676cad52f8b39a7df upstream.

The ds1307 driver misreads the ds1388 registers when checking for 12 or 24
hour mode.  Instead of checking the hour register it reads the minute
register.  Therefore the driver thinks minutes >= 40 has the 12HR bit set
and resets the minute register by zeroing the high bits.  This results in
minutes are reset to 0-9, jumping back in time 40 or 50 minutes.  The time
jump is also written back to the RTC.

Signed-off-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Cc: Wan ZongShun <mcuos.com@gmail.com>
Cc: Alessandro Zummo <a.zummo@towertech.it>
Cc: Paul Gortmaker <p_gortmaker@yahoo.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agotcp: fix crash in tcp_xmit_retransmit_queue
Ilpo Järvinen [Mon, 19 Jul 2010 01:16:18 +0000 (01:16 +0000)]
tcp: fix crash in tcp_xmit_retransmit_queue

commit 45e77d314585869dfe43c82679f7e08c9b35b898 upstream.

It can happen that there are no packets in queue while calling
tcp_xmit_retransmit_queue(). tcp_write_queue_head() then returns
NULL and that gets deref'ed to get sacked into a local var.

There is no work to do if no packets are outstanding so we just
exit early.

This oops was introduced by 08ebd1721ab8fd (tcp: remove tp->lost_out
guard to make joining diff nicer).

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Reported-by: Lennart Schulte <lennart.schulte@nets.rwth-aachen.de>
Tested-by: Lennart Schulte <lennart.schulte@nets.rwth-aachen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agonet/core: neighbour update Oops
Doug Kehn [Thu, 15 Jul 2010 01:02:16 +0000 (18:02 -0700)]
net/core: neighbour update Oops

commit 91a72a70594e5212c97705ca6a694bd307f7a26b upstream.

When configuring DMVPN (GRE + openNHRP) and a GRE remote
address is configured a kernel Oops is observed.  The
obserseved Oops is caused by a NULL header_ops pointer
(neigh->dev->header_ops) in neigh_update_hhs() when

void (*update)(struct hh_cache*, const struct net_device*, const unsigned char *)
= neigh->dev->header_ops->cache_update;

is executed.  The dev associated with the NULL header_ops is
the GRE interface.  This patch guards against the
possibility that header_ops is NULL.

This Oops was first observed in kernel version 2.6.26.8.

Signed-off-by: Doug Kehn <rdkehn@yahoo.com>
Acked-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoide: Fix IDE taskfile with cfq scheduler
Mikulas Patocka [Tue, 6 Apr 2010 23:43:33 +0000 (16:43 -0700)]
ide: Fix IDE taskfile with cfq scheduler

commit 720fc22a7af79d91ec460c80efa92c65c12d105e upstream.

When ide taskfile access is being used (for example with hdparm --security
commands) and cfq scheduler is selected, the scheduler crashes on BUG in
cfq_put_request.

The reason is that the cfq scheduler is tracking counts of read and write
requests separately; the ide-taskfile subsystem allocates a read request and
then flips the flag to make it a write request. The counters in cfq will
mismatch.

This patch changes ide-taskfile to allocate the READ or WRITE request as
required and don't change the flag later.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agocmd640: fix kernel oops in test_irq() method
Sergei Shtylyov [Tue, 11 May 2010 07:08:03 +0000 (00:08 -0700)]
cmd640: fix kernel oops in test_irq() method

commit a9ddabc52ce3757a4331d6c1e8bf4065333cc51b upstream.

When implementing the test_iqr() method, I forgot that this driver is not an
ordinary PCI driver and also needs to support VLB variant of the chip. Moreover,
'hwif->dev' should be NULL, potentially causing oops in pci_read_config_byte().

Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoserial: cpm_uart: implement the cpm_uart_early_write() function for console poll
Dongdong Deng [Thu, 17 Jun 2010 03:13:40 +0000 (11:13 +0800)]
serial: cpm_uart: implement the cpm_uart_early_write() function for console poll

commit 8cd774ad30c22b9d89823f1f05d845f4cdaba9e8 upstream.

The cpm_uart_early_write() function which was used for console poll
isn't implemented in the cpm uart driver.

Implementing this function both fixes the build when CONFIG_CONSOLE_POLL
is set and allows kgdboc to work via the cpm uart.

Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com>
Reviewed-by: Bruce Ashfield <bruce.ashfield@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agogenirq: Deal with desc->set_type() changing desc->chip
Thomas Gleixner [Mon, 7 Jun 2010 15:53:51 +0000 (17:53 +0200)]
genirq: Deal with desc->set_type() changing desc->chip

commit 4673247562e39a17e09440fa1400819522ccd446 upstream.

The set_type() function can change the chip implementation when the
trigger mode changes. That might result in using an non-initialized
irq chip when called from __setup_irq() or when called via
set_irq_type() on an already enabled irq.

The set_irq_type() function should not be called on an enabled irq,
but because we forgot to put a check into it, we have a bunch of users
which grew the habit of doing that and it never blew up as the
function is serialized via desc->lock against all users of desc->chip
and they never hit the non-initialized irq chip issue.

The easy fix for the __setup_irq() issue would be to move the
irq_chip_set_defaults(desc->chip) call after the trigger setting to
make sure that a chip change is covered.

But as we have already users, which do the type setting after
request_irq(), the safe fix for now is to call irq_chip_set_defaults()
from __irq_set_trigger() when desc->set_type() changed the irq chip.

It needs a deeper analysis whether we should refuse to change the chip
on an already enabled irq, but that'd be a large scale change to fix
all the existing users. So that's neither stable nor 2.6.35 material.

Reported-by: Esben Haabendal <eha@doredevelopment.dk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: linuxppc-dev <linuxppc-dev@ozlabs.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agosched: Fix over-scheduling bug
Alex,Shi [Thu, 17 Jun 2010 06:08:13 +0000 (14:08 +0800)]
sched: Fix over-scheduling bug

commit 3c93717cfa51316e4dbb471e7c0f9d243359d5f8 upstream.

Commit e70971591 ("sched: Optimize unused cgroup configuration") introduced
an imbalanced scheduling bug.

If we do not use CGROUP, function update_h_load won't update h_load. When the
system has a large number of tasks far more than logical CPU number, the
incorrect cfs_rq[cpu]->h_load value will cause load_balance() to pull too
many tasks to the local CPU from the busiest CPU. So the busiest CPU keeps
going in a round robin. That will hurt performance.

The issue was found originally by a scientific calculation workload that
developed by Yanmin. With that commit, the workload performance drops
about 40%.

 CPU  before    after

 00   : 2       : 7
 01   : 1       : 7
 02   : 11      : 6
 03   : 12      : 7
 04   : 6       : 6
 05   : 11      : 7
 06   : 10      : 6
 07   : 12      : 7
 08   : 11      : 6
 09   : 12      : 6
 10   : 1       : 6
 11   : 1       : 6
 12   : 6       : 6
 13   : 2       : 6
 14   : 2       : 6
 15   : 1       : 6

Reviewed-by: Yanmin zhang <yanmin.zhang@intel.com>
Signed-off-by: Alex Shi <alex.shi@intel.com>
Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
LKML-Reference: <1276754893.9452.5442.camel@debian>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agosched: Prevent compiler from optimising the sched_avg_update() loop
Will Deacon [Mon, 24 May 2010 19:11:43 +0000 (12:11 -0700)]
sched: Prevent compiler from optimising the sched_avg_update() loop

commit 0d98bb2656e9bd2dfda2d089db1fe1dbdab41504 upstream.

GCC 4.4.1 on ARM has been observed to replace the while loop in
sched_avg_update with a call to uldivmod, resulting in the
following build failure at link-time:

kernel/built-in.o: In function `sched_avg_update':
 kernel/sched.c:1261: undefined reference to `__aeabi_uldivmod'
 kernel/sched.c:1261: undefined reference to `__aeabi_uldivmod'
make: *** [.tmp_vmlinux1] Error 1

This patch introduces a fake data hazard to the loop body to
prevent the compiler optimising the loop away.

Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Peter Zijlstra <peterz@infradead.org>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agox86, Calgary: Limit the max PHB number to 256
Darrick J. Wong [Thu, 1 Jul 2010 00:45:19 +0000 (17:45 -0700)]
x86, Calgary: Limit the max PHB number to 256

commit d596043d71ff0d7b3d0bead19b1d68c55f003093 upstream.

The x3950 family can have as many as 256 PCI buses in a single system, so
change the limits to the maximum.  Since there can only be 256 PCI buses in one
domain, we no longer need the BUG_ON check.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
LKML-Reference: <20100701004519.GQ15515@tux1.beaverton.ibm.com>
Signed-off-by: H. Peter Anvin <hpa@zytor.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agox86, Calgary: Increase max PHB number
Darrick J. Wong [Thu, 24 Jun 2010 21:26:47 +0000 (14:26 -0700)]
x86, Calgary: Increase max PHB number

commit 499a00e92dd9a75395081f595e681629eb1eebad upstream.

Newer systems (x3950M2) can have 48 PHBs per chassis and 8
chassis, so bump the limits up and provide an explanation
of the requirements for each class.

Signed-off-by: Darrick J. Wong <djwong@us.ibm.com>
Acked-by: Muli Ben-Yehuda <muli@il.ibm.com>
Cc: Corinna Schultz <cschultz@linux.vnet.ibm.com>
LKML-Reference: <20100624212647.GI15515@tux1.beaverton.ibm.com>
[ v2: Fixed build bug, added back PHBS_PER_CALGARY == 4 ]
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agox86: Fix vsyscall on gcc 4.5 with -Os
Andi Kleen [Fri, 18 Jun 2010 21:09:00 +0000 (23:09 +0200)]
x86: Fix vsyscall on gcc 4.5 with -Os

commit 124482935fb7fb9303c8a8ab930149c6a93d9910 upstream.

This fixes the -Os breaks with gcc 4.5 bug.  rdtsc_barrier needs to be
force inlined, otherwise user space will jump into kernel space and
kill init.

This also addresses http://gcc.gnu.org/bugzilla/show_bug.cgi?id=44129
I believe.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
LKML-Reference: <20100618210859.GA10913@basil.fritz.box>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoperf: Resurrect flat callchains
Frederic Weisbecker [Thu, 8 Jul 2010 04:06:17 +0000 (06:06 +0200)]
perf: Resurrect flat callchains

commit 97aa1052739c6a06cb6b0467dbf410613d20bc97 upstream.

Initialize the callchain radix tree root correctly.

When we walk through the parents, we must stop after the root, but
since it wasn't well initialized, its parent pointer was random.

Also the number of hits was random because uninitialized, hence it
was part of the callchain while the root doesn't contain anything.

This fixes segfaults and percentages followed by empty callchains
while running:

perf report -g flat

Reported-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoamd64-agp: Probe unknown AGP devices the right way
Ben Hutchings [Wed, 24 Mar 2010 03:36:31 +0000 (03:36 +0000)]
amd64-agp: Probe unknown AGP devices the right way

commit 6fd024893911dcb51b4a0aa71971db5ba38f7071 upstream.

The current initialisation code probes 'unsupported' AGP devices
simply by calling its own probe function.  It does not lock these
devices or even check whether another driver is already bound to
them.

We must use the device core to manage this.  So if the specific
device id table didn't match anything and agp_try_unsupported=1,
switch the device id table and call driver_attach() again.

Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoSCSI: aacraid: Eliminate use after free
Julia Lawall [Sat, 15 May 2010 09:46:12 +0000 (11:46 +0200)]
SCSI: aacraid: Eliminate use after free

commit 8a52da632ceb9d8b776494563df579e87b7b586b upstream.

The debugging code using the freed structure is moved before the kfree.

A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@free@
expression E;
position p;
@@
kfree@p(E)

@@
expression free.E, subE<=free.E, E1;
position free.p;
@@

  kfree@p(E)
  ...
(
  subE = E1
|
* E
)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
14 years agonetfilter: ip6t_REJECT: fix a dst leak in ipv6 REJECT
Eric Dumazet [Fri, 2 Jul 2010 08:05:01 +0000 (10:05 +0200)]
netfilter: ip6t_REJECT: fix a dst leak in ipv6 REJECT

commit 499031ac8a3df6738f6186ded9da853e8ea18253 upstream.

We should release dst if dst->error is set.

Bug introduced in 2.6.14 by commit e104411b82f5c
([XFRM]: Always release dst_entry on error in xfrm_lookup)

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoipvs: Add missing locking during connection table hashing and unhashing
Sven Wegener [Wed, 9 Jun 2010 14:10:57 +0000 (16:10 +0200)]
ipvs: Add missing locking during connection table hashing and unhashing

commit aea9d711f3d68c656ad31ab578ecfb0bb5cd7f97 upstream.

The code that hashes and unhashes connections from the connection table
is missing locking of the connection being modified, which opens up a
race condition and results in memory corruption when this race condition
is hit.

Here is what happens in pretty verbose form:

CPU 0 CPU 1
------------ ------------
An active connection is terminated and
we schedule ip_vs_conn_expire() on this
CPU to expire this connection.

IRQ assignment is changed to this CPU,
but the expire timer stays scheduled on
the other CPU.

New connection from same ip:port comes
in right before the timer expires, we
find the inactive connection in our
connection table and get a reference to
it. We proper lock the connection in
tcp_state_transition() and read the
connection flags in set_tcp_state().

ip_vs_conn_expire() gets called, we
unhash the connection from our
connection table and remove the hashed
flag in ip_vs_conn_unhash(), without
proper locking!

While still holding proper locks we
write the connection flags in
set_tcp_state() and this sets the hashed
flag again.

ip_vs_conn_expire() fails to expire the
connection, because the other CPU has
incremented the reference count. We try
to re-insert the connection into our
connection table, but this fails in
ip_vs_conn_hash(), because the hashed
flag has been set by the other CPU. We
re-schedule execution of
ip_vs_conn_expire(). Now this connection
has the hashed flag set, but isn't
actually hashed in our connection table
and has a dangling list_head.

We drop the reference we held on the
connection and schedule the expire timer
for timeouting the connection on this
CPU. Further packets won't be able to
find this connection in our connection
table.

ip_vs_conn_expire() gets called again,
we think it's already hashed, but the
list_head is dangling and while removing
the connection from our connection table
we write to the memory location where
this list_head points to.

The result will probably be a kernel oops at some other point in time.

This race condition is pretty subtle, but it can be triggered remotely.
It needs the IRQ assignment change or another circumstance where packets
coming from the same ip:port for the same service are being processed on
different CPUs. And it involves hitting the exact time at which
ip_vs_conn_expire() gets called. It can be avoided by making sure that
all packets from one connection are always processed on the same CPU and
can be made harder to exploit by changing the connection timeouts to
some custom values.

Signed-off-by: Sven Wegener <sven.wegener@stealer.net>
Acked-by: Simon Horman <horms@verge.net.au>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agotpm_tis: fix subsequent suspend failures
Rajiv Andrade [Wed, 23 Jun 2010 19:18:56 +0000 (12:18 -0700)]
tpm_tis: fix subsequent suspend failures

commit 59f6fbe4291fcc078ba26ce4edf8373a7620a13a upstream.

Fix subsequent suspends by issuing tpm_continue_selftest during resume.
Otherwise, the tpm chip seems to be not fully initialized and will reject
the save state command during suspend, thus preventing the whole system
to suspend.

Addresses https://bugzilla.kernel.org/show_bug.cgi?id=16256

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
Cc: James Morris <jmorris@namei.org>
Cc: Debora Velarde <debora@linux.vnet.ibm.com>
Cc: David Safford <safford@watson.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Morris <jmorris@namei.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agodrm/radeon/kms: fix legacy LVDS dpms sequence
Alex Deucher [Wed, 21 Jul 2010 23:37:21 +0000 (19:37 -0400)]
drm/radeon/kms: fix legacy LVDS dpms sequence

commit 15cb02c0a0338ee724bf23e31c7c410ecbffeeba upstream.

Add delay after turning off the LVDS encoder.

Fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=16389

Tested-by: Jan Kreuzer <kontrollator@gmx.de>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agodrm/radeon/kms: add quirk for ASUS HD 3600 board
Alex Deucher [Tue, 20 Jul 2010 22:07:22 +0000 (18:07 -0400)]
drm/radeon/kms: add quirk for ASUS HD 3600 board

commit e153b70b89770968a704eda0b55707c6066b2d44 upstream.

Connector is actually DVI rather than HDMI.

Reported-by: trapDoor <trapdoor6@gmail.com>
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agodrm/radeon/r200: handle more hw tex coord types
Roland Scheidegger [Sat, 12 Jun 2010 17:31:10 +0000 (13:31 -0400)]
drm/radeon/r200: handle more hw tex coord types

commit 688acaa2897462e4c5e2482496e2868db0760809 upstream.

Code did not handle projected 2d and depth coordinates, meaning potentially
set 3d or cube special handling might stick.
(Not sure what depth coord actually does, but I guess handling it
like a normal coordinate is the right thing to do.)
Might be related to https://bugs.freedesktop.org/show_bug.cgi?id=26428

Signed-off-by: sroland@vmware.com
Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agodrm/i915: Make G4X-style PLL search more permissive
Adam Jackson [Fri, 2 Jul 2010 20:43:30 +0000 (16:43 -0400)]
drm/i915: Make G4X-style PLL search more permissive

commit 6ba770dc5c334aff1c055c8728d34656e0f091e2 upstream.

Fixes an Ironlake laptop with a 68.940MHz 1280x800 panel and 120MHz SSC
reference clock.

More generally, the 0.488% tolerance used before is just too tight to
reliably find a PLL setting.  I extracted the search algorithm and
modified it to find the dot clocks with maximum error over the valid
range for the given output type:

http://people.freedesktop.org/~ajax/intel_g4x_find_best_pll.c

This gave:

Worst dotclock for Ironlake DAC refclk is 350000kHz (error 0.00571)
Worst dotclock for Ironlake SL-LVDS refclk is 102321kHz (error 0.00524)
Worst dotclock for Ironlake DL-LVDS refclk is 219642kHz (error 0.00488)
Worst dotclock for Ironlake SL-LVDS SSC refclk is 84374kHz (error 0.00529)
Worst dotclock for Ironlake DL-LVDS SSC refclk is 183035kHz (error 0.00488)
Worst dotclock for G4X SDVO refclk is 267600kHz (error 0.00448)
Worst dotclock for G4X HDMI refclk is 334400kHz (error 0.00478)
Worst dotclock for G4X SL-LVDS refclk is 95571kHz (error 0.00449)
Worst dotclock for G4X DL-LVDS refclk is 224000kHz (error 0.00510)

Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agodrm/i915: enable low power render writes on GEN3 hardware.
Dave Airlie [Tue, 20 Jul 2010 03:15:31 +0000 (13:15 +1000)]
drm/i915: enable low power render writes on GEN3 hardware.

commit 944001201ca0196bcdb088129e5866a9f379d08c upstream.

A lot of 945GMs have had stability issues for a long time, this manifested as X hangs, blitter engine hangs, and lots of crashes.

one such report is at:
https://bugs.freedesktop.org/show_bug.cgi?id=20560

along with numerous distro bugzillas.

This only took a week of digging and hair ripping to figure out.

Tracked down and tested on a 945GM Lenovo T60,
previously running
x11perf -copypixwin500
or
x11perf -copywinpix500
repeatedly would cause the GPU to wedge within 4 or 5 tries, with random busy bits set.

After this patch no hangs were observed.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agodrm/i915: Define MI_ARB_STATE bits
Keith Packard [Tue, 20 Jul 2010 04:12:35 +0000 (21:12 -0700)]
drm/i915: Define MI_ARB_STATE bits

commit 45503ded966c98e604c9667c0b458d40666b9ef3 upstream.

The i915 memory arbiter has a register full of configuration
bits which are currently not defined in the driver header file.

Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoi915: fix lock imbalance on error path...
Daniel J Blueman [Mon, 17 May 2010 13:23:52 +0000 (14:23 +0100)]
i915: fix lock imbalance on error path...

commit f953c9353f5fe6e98fa7f32f51060a74d845b5f8 upstream.

While investigating Intel i5 Arrandale GPU lockups with -rc4, I
noticed a lock imbalance.

Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agodynamic debug: move ddebug_remove_module() down into free_module()
Jason Baron [Tue, 27 Jul 2010 20:18:01 +0000 (13:18 -0700)]
dynamic debug: move ddebug_remove_module() down into free_module()

commit b82bab4bbe9efa7bc7177fc20620fff19bd95484 upstream.

The command

echo "file ec.c +p" >/sys/kernel/debug/dynamic_debug/control

causes an oops.

Move the call to ddebug_remove_module() down into free_module().  In this
way it should be called from all error paths.  Currently, we are missing
the remove if the module init routine fails.

Signed-off-by: Jason Baron <jbaron@redhat.com>
Reported-by: Thomas Renninger <trenn@suse.de>
Tested-by: Thomas Renninger <trenn@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agop54pci: add Symbol AP-300 minipci adapters pciid
Joerg Albert [Sun, 13 Jun 2010 12:22:23 +0000 (14:22 +0200)]
p54pci: add Symbol AP-300 minipci adapters pciid

commit 50900f1698f68127e54c67fdfe829e4a97b1be2b upstream.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoBtrfs: fix checks in BTRFS_IOC_CLONE_RANGE
Dan Rosenberg [Mon, 19 Jul 2010 20:58:20 +0000 (16:58 -0400)]
Btrfs: fix checks in BTRFS_IOC_CLONE_RANGE

commit 2ebc3464781ad24474abcbd2274e6254689853b5 upstream.

1.  The BTRFS_IOC_CLONE and BTRFS_IOC_CLONE_RANGE ioctls should check
whether the donor file is append-only before writing to it.

2.  The BTRFS_IOC_CLONE_RANGE ioctl appears to have an integer
overflow that allows a user to specify an out-of-bounds range to copy
from the source file (if off + len wraps around).  I haven't been able
to successfully exploit this, but I'd imagine that a clever attacker
could use this to read things he shouldn't.  Even if it's not
exploitable, it couldn't hurt to be safe.

Signed-off-by: Dan Rosenberg <dan.j.rosenberg@gmail.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agomac80211: Handle mesh action frames in ieee80211_rx_h_action
Javier Cardona [Mon, 29 Mar 2010 18:00:20 +0000 (11:00 -0700)]
mac80211: Handle mesh action frames in ieee80211_rx_h_action

commit 1cb561f83793191cf86a2db3948d28f5f42df9ff upstream.

This fixes the problem introduced in commit
8404080568613d93ad7cf0a16dfb68 which broke mesh peer link establishment.

changes:
v2  Added missing break (Johannes)
v3  Broke original patch into two (Johannes)

Signed-off-by: Javier Cardona <javier@cozybit.com>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agomac80211: do not wip out old supported rates
Stanislaw Gruszka [Wed, 28 Apr 2010 13:17:03 +0000 (15:17 +0200)]
mac80211: do not wip out old supported rates

commit f0b058b61711ebf5be94d6865ca7b2c259b71d37 upstream.

Use old supported rates, if AP do not provide supported rates
information element in a new managment frame.

Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoiwlwifi: cancel scan watchdog in iwl_bg_abort_scan
John W. Linville [Mon, 14 Jun 2010 18:30:25 +0000 (14:30 -0400)]
iwlwifi: cancel scan watchdog in iwl_bg_abort_scan

commit a69b03e941abae00380fc6bc1877fb797a1b31e6 upstream.

Avoids this:

WARNING: at net/mac80211/scan.c:312 ieee80211_scan_completed+0x5f/0x1f1
[mac80211]()
Hardware name: Latitude E5400
Modules linked in: aes_x86_64 aes_generic fuse ipt_MASQUERADE iptable_nat
nf_nat rfcomm sco bridge stp llc bnep l2cap sunrpc cpufreq_ondemand
acpi_cpufreq freq_table xt_physdev ip6t_REJECT nf_conntrack_ipv6
ip6table_filter ip6_tables ipv6 kvm_intel kvm uinput arc4 ecb
snd_hda_codec_intelhdmi snd_hda_codec_idt snd_hda_intel iwlagn snd_hda_codec
snd_hwdep snd_seq snd_seq_device iwlcore snd_pcm dell_wmi sdhci_pci sdhci
iTCO_wdt tg3 dell_laptop mmc_core i2c_i801 wmi mac80211 snd_timer
iTCO_vendor_support btusb joydev dcdbas cfg80211 bluetooth snd soundcore
microcode rfkill snd_page_alloc firewire_ohci firewire_core crc_itu_t
yenta_socket rsrc_nonstatic i915 drm_kms_helper drm i2c_algo_bit i2c_core video
output [last unloaded: scsi_wait_scan]
Pid: 979, comm: iwlagn Tainted: G        W  2.6.33.3-85.fc13.x86_64 #1
Call Trace:
[<ffffffff8104b558>] warn_slowpath_common+0x77/0x8f
[<ffffffff8104b57f>] warn_slowpath_null+0xf/0x11
[<ffffffffa01bb7d9>] ieee80211_scan_completed+0x5f/0x1f1 [mac80211]
[<ffffffffa02a23f0>] iwl_bg_scan_completed+0xbb/0x17a [iwlcore]
[<ffffffff81060d3d>] worker_thread+0x1a4/0x232
[<ffffffffa02a2335>] ? iwl_bg_scan_completed+0x0/0x17a [iwlcore]
[<ffffffff81064817>] ? autoremove_wake_function+0x0/0x34
[<ffffffff81060b99>] ? worker_thread+0x0/0x232
[<ffffffff810643c7>] kthread+0x7a/0x82
[<ffffffff8100a924>] kernel_thread_helper+0x4/0x10
[<ffffffff8106434d>] ? kthread+0x0/0x82
[<ffffffff8100a920>] ? kernel_thread_helper+0x0/0x10

Reported here:

https://bugzilla.redhat.com/show_bug.cgi?id=590436

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Reported-by: Mihai Harpau <mishu@piatafinanciara.ro>
Acked-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agofb: fix colliding defines for fb flags.
Dave Airlie [Wed, 23 Jun 2010 01:35:41 +0000 (11:35 +1000)]
fb: fix colliding defines for fb flags.

commit b26c949755c06ec79e55a75817210083bd78fc9a upstream.

When I added the flags I must have been using a 25 line terminal and missed the following flags.

The collided with flag has one user in staging despite being in-tree for 5 years.

I'm happy to push this via my drm tree unless someone really wants to do it.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoTPM: ReadPubEK output struct fix
Rajiv Andrade [Mon, 14 Jun 2010 16:58:22 +0000 (13:58 -0300)]
TPM: ReadPubEK output struct fix

commit 02a077c52ef7631275a79862ffd9f3dbe9d38bc2 upstream.

This patch adds a missing element of the ReadPubEK command output,
that prevents future overflow of this buffer when copying the
TPM output result into it.

Prevents a kernel panic in case the user tries to read the
pubek from sysfs.

Signed-off-by: Rajiv Andrade <srajiv@linux.vnet.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agohostap: Protect against initialization interrupt
Tim Gardner [Tue, 8 Jun 2010 17:33:02 +0000 (11:33 -0600)]
hostap: Protect against initialization interrupt

commit d6a574ff6bfb842bdb98065da053881ff527be46 upstream.

Use an irq spinlock to hold off the IRQ handler until
enough early card init is complete such that the handler
can run without faulting.

Signed-off-by: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoath9k: Avoid corrupt frames being forwarded to mac80211.
Vivek Natarajan [Tue, 27 Apr 2010 07:35:38 +0000 (13:05 +0530)]
ath9k: Avoid corrupt frames being forwarded to mac80211.

commit 3a37495268ab45507b4cab9d4cb18c5496ab7a10 upstream.

If bit 29 is set, MAC H/W can attempt to decrypt the received aggregate
with WEP or TKIP, eventhough the received frame may be a CRC failed
corrupted frame. If this bit is set, H/W obeys key type in keycache.
If it is not set and if the key type in keycache is neither open nor
AES, H/W forces key type to be open.  But bit 29 should be set to 1
for AsyncFIFO feature to encrypt/decrypt the aggregate with WEP or TKIP.

Reported-by: Johan Hovold <johan.hovold@lundinova.se>
Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com>
Signed-off-by: Ranga Rao Ravuri <ranga.ravuri@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoath9k: re-enable ps by default for new single chip families
Luis R. Rodriguez [Fri, 18 Dec 2009 16:26:04 +0000 (11:26 -0500)]
ath9k: re-enable ps by default for new single chip families

commit 14acdde6e527950f66c084dbf19bad6fbfcaeedc upstream.

The newer single chip hardware family of chipsets have not been
experiencing issues with power saving set by default with recent
fixes merged (even into stable). The remaining issues are only
reported with AR5416 and since enabling PS by default can increase
power savings considerably best to take advantage of that feature
as this has been tested properly.

For more details on this issue see the bug report:

http://bugzilla.kernel.org/show_bug.cgi?id=14267

We leave AR5416 with PS disabled by default, that seems to require
some more work.

Cc: Peter Stuge <peter@stuge.se>
Cc: Justin P. Mattock <justinmattock@gmail.com>
Cc: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoath5k: drop warning on jumbo frames
Luis R. Rodriguez [Mon, 10 May 2010 19:26:27 +0000 (15:26 -0400)]
ath5k: drop warning on jumbo frames

commit 9637e516d16a58b13f6098cfe899e22963132be3 upstream.

Jumbo frames are not supported, and if they are seen it is likely
a bogus frame so just silently discard them instead of warning on
them all time. Also, instead of dropping them immediately though
move the check *after* we check for all sort of frame errors. This
should enable us to discard these frames if the hardware picks
other bogus items first. Lets see if we still get those jumbo
counters increasing still with this.

Jumbo frames would happen if we tell hardware we can support
a small 802.11 chunks of DMA'd frame, hardware would split RX'd
frames into parts and we'd have to reconstruct them in software.
This is done with USB due to the bulk size but with ath5k we
already provide a good limit to hardware and this should not be
happening.

This is reported quite often and if it fills the logs then this
needs to be addressed and to avoid spurious reports.

Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoSUNRPC: Fix a re-entrancy bug in xs_tcp_read_calldir()
Trond Myklebust [Wed, 16 Jun 2010 17:57:32 +0000 (13:57 -0400)]
SUNRPC: Fix a re-entrancy bug in xs_tcp_read_calldir()

commit b76ce56192bcf618013fb9aecd83488cffd645cc upstream.

If the attempt to read the calldir fails, then instead of storing the read
bytes, we currently discard them. This leads to a garbage final result when
upon re-entry to the same routine, we read the remaining bytes.

Fixes the regression in bugzilla number 16213. Please see
    https://bugzilla.kernel.org/show_bug.cgi?id=16213

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoNFSv4: Ensure that /proc/self/mountinfo displays the minor version number
Trond Myklebust [Fri, 18 Jun 2010 16:23:58 +0000 (12:23 -0400)]
NFSv4: Ensure that /proc/self/mountinfo displays the minor version number

commit 0be8189f2c87fcc747d6a4a657a0b6e2161b2318 upstream.

Currently, we do not display the minor version mount parameter in the
/proc mount info.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoNFSv4: Fix an embarassing typo in encode_attrs()
Trond Myklebust [Tue, 22 Jun 2010 12:52:39 +0000 (08:52 -0400)]
NFSv4: Fix an embarassing typo in encode_attrs()

commit d3f6baaa34c54040b3ef30950e59b54ac0624b21 upstream.

Apparently, we have never been able to set the atime correctly from the
NFSv4 client.

Reported-by: 小倉一夫 <ka-ogura@bd6.so-net.ne.jp>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agomath-emu: correct test for downshifting fraction in _FP_FROM_INT()
Mikael Pettersson [Wed, 21 Jul 2010 01:45:14 +0000 (18:45 -0700)]
math-emu: correct test for downshifting fraction in _FP_FROM_INT()

commit f8324e20f8289dffc646d64366332e05eaacab25 upstream.

The kernel's math-emu code contains a macro _FP_FROM_INT() which is
used to convert an integer to a raw normalized floating-point value.
It does this basically in three steps:

1. Compute the exponent from the number of leading zero bits.
2. Downshift large fractions to put the MSB in the right position
   for normalized fractions.
3. Upshift small fractions to put the MSB in the right position.

There is an boundary error in step 2, causing a fraction with its
MSB exactly one bit above the normalized MSB position to not be
downshifted.  This results in a non-normalized raw float, which when
packed becomes a massively inaccurate representation for that input.

The impact of this depends on a number of arch-specific factors,
but it is known to have broken emulation of FXTOD instructions
on UltraSPARC III, which was originally reported as GCC bug 44631
<http://gcc.gnu.org/bugzilla/show_bug.cgi?id=44631>.

Any arch which uses math-emu to emulate conversions from integers to
same-size floats may be affected.

The fix is simple: the exponent comparison used to determine if the
fraction should be downshifted must be "<=" not "<".

I'm sending a kernel module to test this as a reply to this message.
There are also SPARC user-space test cases in the GCC bug entry.

Signed-off-by: Mikael Pettersson <mikpe@it.uu.se>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agosparc: Fix use of uid16_t and gid16_t in asm/stat.h
Rob Landley [Sat, 27 Mar 2010 15:36:18 +0000 (08:36 -0700)]
sparc: Fix use of uid16_t and gid16_t in asm/stat.h

commit 7469a9acf919d36836f6c635099d8edc9be4528a upstream.

Signed-off-by: Rob Landley <rob@landley.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoigb: change how we handle alternate mac addresses
Alexander Duyck [Mon, 5 Oct 2009 06:34:25 +0000 (06:34 +0000)]
igb: change how we handle alternate mac addresses

commit 22896639af98ebc721a94ed71fc3acf2fb4a24dc upstream.

This patch allows us to treat the alternate mac address as though it is the
physical address on the adapter.  This is accomplished by letting the
alt_mac_address function to only fail on an NVM error.  If no errors occur
and the alternate mac address is not present then RAR0 is read as the
default mac address.

Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Cc: Brandon Philips <bphilips@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agosky2: enable rx/tx in sky2_phy_reinit()
Brandon Philips [Wed, 16 Jun 2010 16:21:58 +0000 (16:21 +0000)]
sky2: enable rx/tx in sky2_phy_reinit()

commit 38000a94a902e94ca8b5498f7871c6316de8957a upstream.

sky2_phy_reinit is called by the ethtool helpers sky2_set_settings,
sky2_nway_reset and sky2_set_pauseparam when netif_running.

However, at the end of sky2_phy_init GM_GP_CTRL has GM_GPCR_RX_ENA and
GM_GPCR_TX_ENA cleared. So, doing these commands causes the device to
stop working:

$ ethtool -r eth0
$ ethtool -A eth0 autoneg off

Fix this issue by enabling Rx/Tx after running sky2_phy_init in
sky2_phy_reinit.

Signed-off-by: Brandon Philips <bphilips@suse.de>
Tested-by: Brandon Philips <bphilips@suse.de>
Cc: stable@kernel.org
Tested-by: Mike McCormack <mikem@ring3k.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agocpmac: do not leak struct net_device on phy_connect errors
Florian Fainelli [Sun, 20 Jun 2010 22:07:48 +0000 (22:07 +0000)]
cpmac: do not leak struct net_device on phy_connect errors

commit ed770f01360b392564650bf1553ce723fa46afec upstream.

If the call to phy_connect fails, we will return directly instead of freeing
the previously allocated struct net_device.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoALSA: hda - Add Macbook 5,2 quirk
Luke Yelavich [Tue, 22 Jun 2010 01:04:19 +0000 (11:04 +1000)]
ALSA: hda - Add Macbook 5,2 quirk

commit 3bfea98ff73d377ffce0d4c7f938b7ef958cdb35 upstream.

BugLink: https://bugs.launchpad.net/bugs/463178
Set Macbook 5,2 (106b:4a00) hardware to use ALC885_MB5

Signed-off-by: Luke Yelavich <luke.yelavich@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoCIFS: Fix a malicious redirect problem in the DNS lookup code
David Howells [Thu, 22 Jul 2010 11:53:18 +0000 (12:53 +0100)]
CIFS: Fix a malicious redirect problem in the DNS lookup code

commit 4c0c03ca54f72fdd5912516ad0a23ec5cf01bda7 upstream.

Fix the security problem in the CIFS filesystem DNS lookup code in which a
malicious redirect could be installed by a random user by simply adding a
result record into one of their keyrings with add_key() and then invoking a
CIFS CFS lookup [CVE-2010-2524].

This is done by creating an internal keyring specifically for the caching of
DNS lookups.  To enforce the use of this keyring, the module init routine
creates a set of override credentials with the keyring installed as the thread
keyring and instructs request_key() to only install lookup result keys in that
keyring.

The override is then applied around the call to request_key().

This has some additional benefits when a kernel service uses this module to
request a key:

 (1) The result keys are owned by root, not the user that caused the lookup.

 (2) The result keys don't pop up in the user's keyrings.

 (3) The result keys don't come out of the quota of the user that caused the
     lookup.

The keyring can be viewed as root by doing cat /proc/keys:

2a0ca6c3 I-----     1 perm 1f030000     0     0 keyring   .dns_resolver: 1/4

It can then be listed with 'keyctl list' by root.

# keyctl list 0x2a0ca6c3
1 key in keyring:
726766307: --alswrv     0     0 dns_resolver: foo.bar.com

Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-and-Tested-by: Jeff Layton <jlayton@redhat.com>
Acked-by: Steve French <smfrench@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agocifs: don't attempt busy-file rename unless it's in same directory
Jeff Layton [Tue, 1 Jun 2010 20:21:01 +0000 (16:21 -0400)]
cifs: don't attempt busy-file rename unless it's in same directory

commit ed0e3ace576d297a5c7015401db1060bbf677b94 upstream.

Busy-file renames don't actually work across directories, so we need
to limit this code to renames within the same dir.

This fixes the bug detailed here:

    https://bugzilla.redhat.com/show_bug.cgi?id=591938

Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agocifs: remove bogus first_time check in NTLMv2 session setup code
Jeff Layton [Wed, 16 Jun 2010 17:40:18 +0000 (13:40 -0400)]
cifs: remove bogus first_time check in NTLMv2 session setup code

commit 8a224d489454b7457105848610cfebebdec5638d upstream.

This bug appears to be the result of a cut-and-paste mistake from the
NTLMv1 code. The function to generate the MAC key was commented out, but
not the conditional above it. The conditional then ended up causing the
session setup key not to be copied to the buffer unless this was the
first session on the socket, and that made all but the first NTLMv2
session setup fail.

Fix this by removing the conditional and all of the commented clutter
that made it difficult to see.

Reported-by: Gunther Deschner <gdeschne@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agohwmon: (it87) Fix in7 on IT8720F
Jean Delvare [Fri, 9 Jul 2010 14:22:48 +0000 (16:22 +0200)]
hwmon: (it87) Fix in7 on IT8720F

commit 436cad2a41a40c6c32bd9152b63d17eeb1f7c99b upstream.

The IT8720F has no VIN7 pin, so VCCH should always be routed
internally to VIN7 with an internal divider. Curiously, there still
is a configuration bit to control this, which means it can be set
incorrectly. And even more curiously, many boards out there are
improperly configured, even though the IT8720F datasheet claims that
the internal routing of VCCH to VIN7 is the default setting. So we
force the internal routing in this case.

It turns out that all boards with the wrong setting are from Gigabyte,
so I suspect a BIOS bug. But it's easy enough to workaround in the
driver, so let's do it.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Jean-Marc Spaggiari <jean-marc@spaggiari.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agohwmon: (coretemp) Skip duplicate CPU entries
Jean Delvare [Fri, 9 Jul 2010 14:22:49 +0000 (16:22 +0200)]
hwmon: (coretemp) Skip duplicate CPU entries

commit d883b9f0977269d519469da72faec6a7f72cb489 upstream.

On hyper-threaded CPUs, each core appears twice in the CPU list. Skip
the second entry to avoid duplicate sensors.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Huaxu Wan <huaxu.wan@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agohwmon: (coretemp) Properly label the sensors
Jean Delvare [Fri, 9 Jul 2010 14:22:51 +0000 (16:22 +0200)]
hwmon: (coretemp) Properly label the sensors

commit 3f4f09b4be35d38d6e2bf22c989443e65e70fc4c upstream.

Don't assume that CPU entry number and core ID always match. It
worked in the simple cases (single CPU, no HT) but fails on
multi-CPU systems.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Acked-by: Huaxu Wan <huaxu.wan@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agohwmon: (k8temp) Fix temperature reporting for ASB1 processor revisions
Andreas Herrmann [Fri, 9 Jul 2010 14:22:47 +0000 (16:22 +0200)]
hwmon: (k8temp) Fix temperature reporting for ASB1 processor revisions

commit d535bad90dad4eb42ec6528043fcfb53627d4f89 upstream.

Reported temperature for ASB1 CPUs is too high.
Add ASB1 CPU revisions (these are also non-desktop variants) to the
list of CPUs for which the temperature fixup is not required.

Example: (from LENOVO ThinkPad Edge 13, 01972NG, system was idle)

  Current kernel reports

  $ sensors
  k8temp-pci-00c3
  Adapter: PCI adapter
  Core0 Temp:  +74.0 C
  Core0 Temp:  +70.0 C
  Core1 Temp:  +69.0 C
  Core1 Temp:  +70.0 C

  With this patch I have

  $ sensors
  k8temp-pci-00c3
  Adapter: PCI adapter
  Core0 Temp:  +54.0 C
  Core0 Temp:  +51.0 C
  Core1 Temp:  +48.0 C
  Core1 Temp:  +49.0 C

Cc: Rudolf Marek <r.marek@assembler.cz>
Signed-off-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agohwmon: (k8temp) Bypass core swapping on single-core processors
Jean Delvare [Sun, 20 Jun 2010 07:22:32 +0000 (09:22 +0200)]
hwmon: (k8temp) Bypass core swapping on single-core processors

commit cd4de21f7e65a8cd04860f5661b3c18648ee52a1 upstream.

Commit a2e066bba2aad6583e3ff648bf28339d6c9f0898 introduced core
swapping for CPU models 64 and later. I recently had a report about
a Sempron 3200+, model 95, for which this patch broke temperature
reading. It happens that this is a single-core processor, so the
effect of the swapping was to read a temperature value for a core
that didn't exist, leading to an incorrect value (-49 degrees C.)

Disabling core swapping on singe-core processors should fix this.

Additional comment from Andreas:

The BKDG says

  Thermal Sensor Core Select (ThermSenseCoreSel)-Bit 2. This bit
  selects the CPU whose temperature is reported in the CurTemp
  field. This bit only applies to dual core processors. For
  single core processors CPU0 Thermal Sensor is always selected.

k8temp_probe() correctly detected that SEL_CORE can't be used on single
core CPU. Thus k8temp did never update the temperature values stored
in temp[1][x] and -49 degrees was reported. For single core CPUs we
must use the values read into temp[0][x].

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Rick Moritz <rhavin@gmx.net>
Acked-by: Andreas Herrmann <andreas.herrmann3@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agossb: Handle Netbook devices where the SPROM address is changed
Christoph Fritz [Sun, 11 Jul 2010 23:26:15 +0000 (18:26 -0500)]
ssb: Handle Netbook devices where the SPROM address is changed

For some Netbook computers with Broadcom BCM4312 wireless interfaces,
the SPROM has been moved to a new location. When the ssb driver tries to
read the old location, the systems hangs when trying to read a
non-existent location. Such freezes are particularly bad as they do not
log the failure.

This patch is modified from commit
da1fdb02d9200ff28b6f3a380d21930335fe5429 with some pieces from other
mainline changes so that it can be applied to stable 2.6.34.Y.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agovirtio-pci: disable msi at startup
Michael S. Tsirkin [Thu, 24 Jun 2010 04:49:06 +0000 (22:49 -0600)]
virtio-pci: disable msi at startup

commit b03214d559471359e2a85ae256686381d0672f29 upstream.

virtio-pci resets the device at startup by writing to the status
register, but this does not clear the pci config space,
specifically msi enable status which affects register
layout.

This breaks things like kdump when they try to use e.g. virtio-blk.

Fix by forcing msi off at startup. Since pci.c already has
a routine to do this, we export and use it instead of duplicating code.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Vivek Goyal <vgoyal@redhat.com>
Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: linux-pci@vger.kernel.org
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoLinux 2.6.32.16 v2.6.32.16
Greg Kroah-Hartman [Mon, 5 Jul 2010 18:14:00 +0000 (11:14 -0700)]
Linux 2.6.32.16

14 years agosctp: fix append error cause to ERROR chunk correctly
Wei Yongjun [Tue, 18 May 2010 05:51:58 +0000 (22:51 -0700)]
sctp: fix append error cause to ERROR chunk correctly

commit 2e3219b5c8a2e44e0b83ae6e04f52f20a82ac0f2 upstream.

commit 5fa782c2f5ef6c2e4f04d3e228412c9b4a4c8809
  sctp: Fix skb_over_panic resulting from multiple invalid \
    parameter errors (CVE-2010-1173) (v4)

cause 'error cause' never be add the the ERROR chunk due to
some typo when check valid length in sctp_init_cause_fixed().

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Reviewed-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoqla2xxx: Disable MSI on qla24xx chips other than QLA2432.
Ben Hutchings [Fri, 19 Mar 2010 23:59:19 +0000 (16:59 -0700)]
qla2xxx: Disable MSI on qla24xx chips other than QLA2432.

commit 6377a7ae1ab82859edccdbc8eaea63782efb134d upstream.

On specific platforms, MSI is unreliable on some of the QLA24xx chips, resulting
in fatal I/O errors under load, as reported in <http://bugs.debian.org/572322>
and by some RHEL customers.

Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@suse.de>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoKEYS: find_keyring_by_name() can gain access to a freed keyring
Toshiyuki Okajima [Fri, 30 Apr 2010 13:32:13 +0000 (14:32 +0100)]
KEYS: find_keyring_by_name() can gain access to a freed keyring

commit cea7daa3589d6b550546a8c8963599f7c1a3ae5c upstream.

find_keyring_by_name() can gain access to a keyring that has had its reference
count reduced to zero, and is thus ready to be freed.  This then allows the
dead keyring to be brought back into use whilst it is being destroyed.

The following timeline illustrates the process:

|(cleaner)                           (user)
|
| free_user(user)                    sys_keyctl()
|  |                                  |
|  key_put(user->session_keyring)     keyctl_get_keyring_ID()
|  || //=> keyring->usage = 0        |
|  |schedule_work(&key_cleanup_task)   lookup_user_key()
|  ||                                   |
|  kmem_cache_free(,user)               |
|  .                                    |[KEY_SPEC_USER_KEYRING]
|  .                                    install_user_keyrings()
|  .                                    ||
| key_cleanup() [<= worker_thread()]    ||
|  |                                    ||
|  [spin_lock(&key_serial_lock)]        |[mutex_lock(&key_user_keyr..mutex)]
|  |                                    ||
|  atomic_read() == 0                   ||
|  |{ rb_ease(&key->serial_node,) }     ||
|  |                                    ||
|  [spin_unlock(&key_serial_lock)]      |find_keyring_by_name()
|  |                                    |||
|  keyring_destroy(keyring)             ||[read_lock(&keyring_name_lock)]
|  ||                                   |||
|  |[write_lock(&keyring_name_lock)]    ||atomic_inc(&keyring->usage)
|  |.                                   ||| *** GET freeing keyring ***
|  |.                                   ||[read_unlock(&keyring_name_lock)]
|  ||                                   ||
|  |list_del()                          |[mutex_unlock(&key_user_k..mutex)]
|  ||                                   |
|  |[write_unlock(&keyring_name_lock)]  ** INVALID keyring is returned **
|  |                                    .
|  kmem_cache_free(,keyring)            .
|                                       .
|                                       atomic_dec(&keyring->usage)
v                                         *** DESTROYED ***
TIME

If CONFIG_SLUB_DEBUG=y then we may see the following message generated:

=============================================================================
BUG key_jar: Poison overwritten
-----------------------------------------------------------------------------

INFO: 0xffff880197a7e200-0xffff880197a7e200. First byte 0x6a instead of 0x6b
INFO: Allocated in key_alloc+0x10b/0x35f age=25 cpu=1 pid=5086
INFO: Freed in key_cleanup+0xd0/0xd5 age=12 cpu=1 pid=10
INFO: Slab 0xffffea000592cb90 objects=16 used=2 fp=0xffff880197a7e200 flags=0x200000000000c3
INFO: Object 0xffff880197a7e200 @offset=512 fp=0xffff880197a7e300

Bytes b4 0xffff880197a7e1f0:  5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZZZZZZZZZ
  Object 0xffff880197a7e200:  6a 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b jkkkkkkkkkkkkkkk

Alternatively, we may see a system panic happen, such as:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000001
IP: [<ffffffff810e61a3>] kmem_cache_alloc+0x5b/0xe9
PGD 6b2b4067 PUD 6a80d067 PMD 0
Oops: 0000 [#1] SMP
last sysfs file: /sys/kernel/kexec_crash_loaded
CPU 1
...
Pid: 31245, comm: su Not tainted 2.6.34-rc5-nofixed-nodebug #2 D2089/PRIMERGY
RIP: 0010:[<ffffffff810e61a3>]  [<ffffffff810e61a3>] kmem_cache_alloc+0x5b/0xe9
RSP: 0018:ffff88006af3bd98  EFLAGS: 00010002
RAX: 0000000000000000 RBX: 0000000000000001 RCX: ffff88007d19900b
RDX: 0000000100000000 RSI: 00000000000080d0 RDI: ffffffff81828430
RBP: ffffffff81828430 R08: ffff88000a293750 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000100000 R12: 00000000000080d0
R13: 00000000000080d0 R14: 0000000000000296 R15: ffffffff810f20ce
FS:  00007f97116bc700(0000) GS:ffff88000a280000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000001 CR3: 000000006a91c000 CR4: 00000000000006e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process su (pid: 31245, threadinfo ffff88006af3a000, task ffff8800374414c0)
Stack:
 0000000512e0958e 0000000000008000 ffff880037f8d180 0000000000000001
 0000000000000000 0000000000008001 ffff88007d199000 ffffffff810f20ce
 0000000000008000 ffff88006af3be48 0000000000000024 ffffffff810face3
Call Trace:
 [<ffffffff810f20ce>] ? get_empty_filp+0x70/0x12f
 [<ffffffff810face3>] ? do_filp_open+0x145/0x590
 [<ffffffff810ce208>] ? tlb_finish_mmu+0x2a/0x33
 [<ffffffff810ce43c>] ? unmap_region+0xd3/0xe2
 [<ffffffff810e4393>] ? virt_to_head_page+0x9/0x2d
 [<ffffffff81103916>] ? alloc_fd+0x69/0x10e
 [<ffffffff810ef4ed>] ? do_sys_open+0x56/0xfc
 [<ffffffff81008a02>] ? system_call_fastpath+0x16/0x1b
Code: 0f 1f 44 00 00 49 89 c6 fa 66 0f 1f 44 00 00 65 4c 8b 04 25 60 e8 00 00 48 8b 45 00 49 01 c0 49 8b 18 48 85 db 74 0d 48 63 45 18 <48> 8b 04 03 49 89 00 eb 14 4c 89 f9 83 ca ff 44 89 e6 48 89 ef
RIP  [<ffffffff810e61a3>] kmem_cache_alloc+0x5b/0xe9

This problem is that find_keyring_by_name does not confirm that the keyring is
valid before accepting it.

Skipping keyrings that have been reduced to a zero count seems the way to go.
To this end, use atomic_inc_not_zero() to increment the usage count and skip
the candidate keyring if that returns false.

The following script _may_ cause the bug to happen, but there's no guarantee
as the window of opportunity is small:

#!/bin/sh
LOOP=100000
USER=dummy_user
/bin/su -c "exit;" $USER || { /usr/sbin/adduser -m $USER; add=1; }
for ((i=0; i<LOOP; i++))
do
/bin/su -c "echo '$i' > /dev/null" $USER
done
(( add == 1 )) && /usr/sbin/userdel -r $USER
exit

Note that the nominated user must not be in use.

An alternative way of testing this may be:

for ((i=0; i<100000; i++))
do
keyctl session foo /bin/true || break
done >&/dev/null

as that uses a keyring named "foo" rather than relying on the user and
user-session named keyrings.

Reported-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Toshiyuki Okajima <toshi.okajima@jp.fujitsu.com>
Acked-by: Serge Hallyn <serue@us.ibm.com>
Signed-off-by: James Morris <jmorris@namei.org>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Chuck Ebbert <cebbert@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoKEYS: Return more accurate error codes
Dan Carpenter [Mon, 17 May 2010 13:42:35 +0000 (14:42 +0100)]
KEYS: Return more accurate error codes

commit 4d09ec0f705cf88a12add029c058b53f288cfaa2 upstream.

We were using the wrong variable here so the error codes weren't being returned
properly.  The original code returns -ENOKEY.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: James Morris <jmorris@namei.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agodm snapshot: simplify sector_to_chunk expression
Mikulas Patocka [Thu, 10 Dec 2009 23:52:08 +0000 (23:52 +0000)]
dm snapshot: simplify sector_to_chunk expression

commit 102c6ddb1d081a6a1fede38c43a42c9811313ec7 upstream.

Removed unnecessary 'and' masking: The right shift discards the lower
bits so there is no need to clear them.

(A later patch needs this change to support a 32-bit chunk_mask.)

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Reviewed-by: Mike Snitzer <snitzer@redhat.com>
Reviewed-by: Jonathan Brassow <jbrassow@redhat.com>
Signed-off-by: Alasdair G Kergon <agk@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoparisc: clear floating point exception flag on SIGFPE signal
Helge Deller [Mon, 3 May 2010 20:44:21 +0000 (20:44 +0000)]
parisc: clear floating point exception flag on SIGFPE signal

commit 550f0d922286556c7ea43974bb7921effb5a5278 upstream.

Clear the floating point exception flag before returning to
user space. This is needed, else the libc trampoline handler
may hit the same SIGFPE again while building up a trampoline
to a signal handler.

Fixes debian bug #559406.

Signed-off-by: Helge Deller <deller@gmx.de>
Signed-off-by: Kyle McMartin <kyle@mcmartin.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agojbd: jbd-debug and jbd2-debug should be writable
Yin Kangkai [Tue, 15 Dec 2009 22:48:25 +0000 (14:48 -0800)]
jbd: jbd-debug and jbd2-debug should be writable

commit 765f8361902d015c864d5e62019b2f139452d7ef upstream.

jbd-debug and jbd2-debug is currently read-only (S_IRUGO), which is not
correct. Make it writable so that we can start debuging.

Signed-off-by: Yin Kangkai <kangkai.yin@intel.com>
Reviewed-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Theodore Ts'o <tytso@mit.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoKVM: x86: Inject #GP with the right rip on efer writes
Roedel, Joerg [Thu, 6 May 2010 09:38:43 +0000 (11:38 +0200)]
KVM: x86: Inject #GP with the right rip on efer writes

This patch fixes a bug in the KVM efer-msr write path. If a
guest writes to a reserved efer bit the set_efer function
injects the #GP directly. The architecture dependent wrmsr
function does not see this, assumes success and advances the
rip. This results in a #GP in the guest with the wrong rip.
This patch fixes this by reporting efer write errors back to
the architectural wrmsr function.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
(cherry picked from commit b69e8caef5b190af48c525f6d715e7b7728a77f6)

14 years agoKVM: x86: Add missing locking to arch specific vcpu ioctls
Avi Kivity [Thu, 13 May 2010 08:50:19 +0000 (11:50 +0300)]
KVM: x86: Add missing locking to arch specific vcpu ioctls

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
(cherry picked from commit 8fbf065d625617bbbf6b72d5f78f84ad13c8b547)

14 years agoKVM: Fix wallclock version writing race
Avi Kivity [Tue, 4 May 2010 12:00:37 +0000 (15:00 +0300)]
KVM: Fix wallclock version writing race

Wallclock writing uses an unprotected global variable to hold the version;
this can cause one guest to interfere with another if both write their
wallclock at the same time.

Acked-by: Glauber Costa <glommer@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
(cherry picked from commit 9ed3c444ab8987c7b219173a2f7807e3f71e234e)

14 years agoKVM: MMU: Don't read pdptrs with mmu spinlock held in mmu_alloc_roots
Avi Kivity [Tue, 4 May 2010 09:58:32 +0000 (12:58 +0300)]
KVM: MMU: Don't read pdptrs with mmu spinlock held in mmu_alloc_roots

On svm, kvm_read_pdptr() may require reading guest memory, which can sleep.

Push the spinlock into mmu_alloc_roots(), and only take it after we've read
the pdptr.

Tested-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
(cherry picked from commit 8facbbff071ff2b19268d3732e31badc60471e21)

14 years agoKVM: VMX: enable VMXON check with SMX enabled (Intel TXT)
Shane Wang [Thu, 29 Apr 2010 16:09:01 +0000 (12:09 -0400)]
KVM: VMX: enable VMXON check with SMX enabled (Intel TXT)

Per document, for feature control MSR:

  Bit 1 enables VMXON in SMX operation. If the bit is clear, execution
        of VMXON in SMX operation causes a general-protection exception.
  Bit 2 enables VMXON outside SMX operation. If the bit is clear, execution
        of VMXON outside SMX operation causes a general-protection exception.

This patch is to enable this kind of check with SMX for VMXON in KVM.

Signed-off-by: Shane Wang <shane.wang@intel.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
(cherry picked from commit cafd66595d92591e4bd25c3904e004fc6f897e2d)

14 years agoKVM: MMU: Segregate shadow pages with different cr0.wp
Avi Kivity [Wed, 12 May 2010 08:48:18 +0000 (11:48 +0300)]
KVM: MMU: Segregate shadow pages with different cr0.wp

When cr0.wp=0, we may shadow a gpte having u/s=1 and r/w=0 with an spte
having u/s=0 and r/w=1.  This allows excessive access if the guest sets
cr0.wp=1 and accesses through this spte.

Fix by making cr0.wp part of the base role; we'll have different sptes for
the two cases and the problem disappears.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
(cherry picked from commit 3dbe141595faa48a067add3e47bba3205b79d33c)

14 years agoKVM: x86: Check LMA bit before set_efer
Sheng Yang [Wed, 12 May 2010 08:40:40 +0000 (16:40 +0800)]
KVM: x86: Check LMA bit before set_efer

kvm_x86_ops->set_efer() would execute vcpu->arch.efer = efer, so the
checking of LMA bit didn't work.

Signed-off-by: Sheng Yang <sheng@linux.intel.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
(cherry picked from commit a3d204e28579427609c3d15d2310127ebaa47d94)

14 years agoKVM: Don't allow lmsw to clear cr0.pe
Avi Kivity [Tue, 11 May 2010 21:28:44 +0000 (00:28 +0300)]
KVM: Don't allow lmsw to clear cr0.pe

The current lmsw implementation allows the guest to clear cr0.pe, contrary
to the manual, which breaks EMM386.EXE.

Fix by ORing the old cr0.pe with lmsw's operand.

Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
(cherry picked from commit f78e917688edbf1f14c318d2e50dc8e7dad20445)

14 years agox86, paravirt: Add a global synchronization point for pvclock
Glauber Costa [Tue, 11 May 2010 16:17:40 +0000 (12:17 -0400)]
x86, paravirt: Add a global synchronization point for pvclock

In recent stress tests, it was found that pvclock-based systems
could seriously warp in smp systems. Using ingo's time-warp-test.c,
I could trigger a scenario as bad as 1.5mi warps a minute in some systems.
(to be fair, it wasn't that bad in most of them). Investigating further, I
found out that such warps were caused by the very offset-based calculation
pvclock is based on.

This happens even on some machines that report constant_tsc in its tsc flags,
specially on multi-socket ones.

Two reads of the same kernel timestamp at approx the same time, will likely
have tsc timestamped in different occasions too. This means the delta we
calculate is unpredictable at best, and can probably be smaller in a cpu
that is legitimately reading clock in a forward ocasion.

Some adjustments on the host could make this window less likely to happen,
but still, it pretty much poses as an intrinsic problem of the mechanism.

A while ago, I though about using a shared variable anyway, to hold clock
last state, but gave up due to the high contention locking was likely
to introduce, possibly rendering the thing useless on big machines. I argue,
however, that locking is not necessary.

We do a read-and-return sequence in pvclock, and between read and return,
the global value can have changed. However, it can only have changed
by means of an addition of a positive value. So if we detected that our
clock timestamp is less than the current global, we know that we need to
return a higher one, even though it is not exactly the one we compared to.

OTOH, if we detect we're greater than the current time source, we atomically
replace the value with our new readings. This do causes contention on big
boxes (but big here means *BIG*), but it seems like a good trade off, since
it provide us with a time source guaranteed to be stable wrt time warps.

After this patch is applied, I don't see a single warp in time during 5 days
of execution, in any of the machines I saw them before.

Signed-off-by: Glauber Costa <glommer@redhat.com>
Acked-by: Zachary Amsden <zamsden@redhat.com>
CC: Jeremy Fitzhardinge <jeremy@goop.org>
CC: Avi Kivity <avi@redhat.com>
CC: Marcelo Tosatti <mtosatti@redhat.com>
CC: Zachary Amsden <zamsden@redhat.com>
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
(cherry picked from commit 489fb490dbf8dab0249ad82b56688ae3842a79e8)

14 years agoKVM: PPC: Do not create debugfs if fail to create vcpu
Wei Yongjun [Tue, 9 Mar 2010 06:13:43 +0000 (14:13 +0800)]
KVM: PPC: Do not create debugfs if fail to create vcpu

If fail to create the vcpu, we should not create the debugfs
for it.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Acked-by: Alexander Graf <agraf@suse.de>
Cc: stable@kernel.org
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
(cherry picked from commit 06056bfb944a0302a8f22eb45f09123de7fb417b)

14 years agoKVM: s390: Fix possible memory leak of in kvm_arch_vcpu_create()
Wei Yongjun [Tue, 9 Mar 2010 06:37:53 +0000 (14:37 +0800)]
KVM: s390: Fix possible memory leak of in kvm_arch_vcpu_create()

This patch fixed possible memory leak in kvm_arch_vcpu_create()
under s390, which would happen when kvm_arch_vcpu_create() fails.

Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com>
Acked-by: Carsten Otte <cotte@de.ibm.com>
Cc: stable@kernel.org
Signed-off-by: Avi Kivity <avi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
(cherry picked from commit 7b06bf2ffa15e119c7439ed0b024d44f66d7b605)

14 years agoInput: psmouse - reset all types of mice before reconnecting
Dmitry Torokhov [Thu, 13 May 2010 07:42:23 +0000 (00:42 -0700)]
Input: psmouse - reset all types of mice before reconnecting

commit ef110b24e28f36620f63dab94708a17c7e267358 upstream.

Synaptics hardware requires resetting device after suspend to ram
in order for the device to be operational. The reset lives in
synaptics-specific reconnect handler, but it is not being invoked
if synaptics support is disabled and the device is handled as a
standard PS/2 device (bare or IntelliMouse protocol).

Let's add reset into generic reconnect handler as well.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Cc: Tim Gardner <tim.gardner@canonical.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agotipc: Fix oops on send prior to entering networked mode (v3)
Neil Horman [Wed, 3 Mar 2010 08:31:23 +0000 (08:31 +0000)]
tipc: Fix oops on send prior to entering networked mode (v3)

commit d0021b252eaf65ca07ed14f0d66425dd9ccab9a6 upstream.

Fix TIPC to disallow sending to remote addresses prior to entering NET_MODE

user programs can oops the kernel by sending datagrams via AF_TIPC prior to
entering networked mode.  The following backtrace has been observed:

ID: 13459  TASK: ffff810014640040  CPU: 0   COMMAND: "tipc-client"
[exception RIP: tipc_node_select_next_hop+90]
RIP: ffffffff8869d3c3  RSP: ffff81002d9a5ab8  RFLAGS: 00010202
RAX: 0000000000000001  RBX: 0000000000000001  RCX: 0000000000000001
RDX: 0000000000000000  RSI: 0000000000000001  RDI: 0000000001001001
RBP: 0000000001001001   R8: 0074736575716552   R9: 0000000000000000
R10: ffff81003fbd0680  R11: 00000000000000c8  R12: 0000000000000008
R13: 0000000000000001  R14: 0000000000000001  R15: ffff810015c6ca00
ORIG_RAX: ffffffffffffffff  CS: 0010  SS: 0018
RIP: 0000003cbd8d49a3  RSP: 00007fffc84e0be8  RFLAGS: 00010206
RAX: 000000000000002c  RBX: ffffffff8005d116  RCX: 0000000000000000
RDX: 0000000000000008  RSI: 00007fffc84e0c00  RDI: 0000000000000003
RBP: 0000000000000000   R8: 00007fffc84e0c10   R9: 0000000000000010
R10: 0000000000000000  R11: 0000000000000246  R12: 0000000000000000
R13: 00007fffc84e0d10  R14: 0000000000000000  R15: 00007fffc84e0c30
ORIG_RAX: 000000000000002c  CS: 0033  SS: 002b

What happens is that, when the tipc module in inserted it enters a standalone
node mode in which communication to its own address is allowed <0.0.0> but not
to other addresses, since the appropriate data structures have not been
allocated yet (specifically the tipc_net pointer).  There is nothing stopping a
client from trying to send such a message however, and if that happens, we
attempt to dereference tipc_net.zones while the pointer is still NULL, and
explode.  The fix is pretty straightforward.  Since these oopses all arise from
the dereference of global pointers prior to their assignment to allocated
values, and since these allocations are small (about 2k total), lets convert
these pointers to static arrays of the appropriate size.  All the accesses to
these bits consider 0/NULL to be a non match when searching, so all the lookups
still work properly, and there is no longer a chance of a bad dererence
anywhere.  As a bonus, this lets us eliminate the setup/teardown routines for
those pointers, and elimnates the need to preform any locking around them to
prevent access while their being allocated/freed.

I've updated the tipc_net structure to behave this way to fix the exact reported
problem, and also fixed up the tipc_bearers and media_list arrays to fix an
obvious simmilar problem that arises from issuing tipc-config commands to
manipulate bearers/links prior to entering networked mode

I've tested this for a few hours by running the sanity tests and stress test
with the tipcutils suite, and nothing has fallen over.  There have been a few
lockdep warnings, but those were there before, and can be addressed later, as
they didn't actually result in any deadlock.

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
CC: Allan Stephens <allan.stephens@windriver.com>
CC: David S. Miller <davem@davemloft.net>
CC: tipc-discussion@lists.sourceforge.net
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoucc_geth: Fix full TX queue processing
Jiajun Wu [Mon, 18 Jan 2010 05:47:50 +0000 (05:47 +0000)]
ucc_geth: Fix full TX queue processing

commit 34692421bc7d6145ef383b014860f4fde10b7505 upstream.

commit 7583605b6d29f1f7f6fc505b883328089f3485ad ("ucc_geth: Fix empty
TX queue processing") fixed empty TX queue mishandling, but didn't
account another corner case: when TX queue becomes full.

Without this patch the driver will stop transmiting when TX queue
becomes full since 'bd == ugeth->txBd[txQ]' actually checks for
two things: queue empty or full.

Let's better check for NULL skb, which unambiguously signals an empty
queue.

Signed-off-by: Jiajun Wu <b06378@freescale.com>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoucc_geth: Fix netdev watchdog triggering on link changes
Anton Vorontsov [Thu, 24 Dec 2009 05:31:05 +0000 (05:31 +0000)]
ucc_geth: Fix netdev watchdog triggering on link changes

commit 08b5e1c91ce95793c59a59529a362a1bcc81faae upstream.

Since commit 864fdf884e82bacbe8ca5e93bd43393a61d2e2b4 ("ucc_geth:
Fix hangs after switching from full to half duplex") ucc_geth driver
disables the controller during MAC configuration changes. Though,
disabling the controller might take quite awhile, and so the netdev
watchdog might get upset:

 NETDEV WATCHDOG: eth2 (ucc_geth): transmit queue 0 timed out
 ------------[ cut here ]------------
 Badness at c02729a8 [verbose debug info unavailable]
 NIP: c02729a8 LR: c02729a8 CTR: c01b6088
 REGS: c0451c40 TRAP: 0700   Not tainted  (2.6.32-trunk-8360e)
 [...]
 NIP [c02729a8] dev_watchdog+0x280/0x290
 LR [c02729a8] dev_watchdog+0x280/0x290
 Call Trace:
 [c0451cf0] [c02729a8] dev_watchdog+0x280/0x290 (unreliable)
 [c0451d50] [c00377c4] run_timer_softirq+0x164/0x224
 [c0451da0] [c0032a38] __do_softirq+0xb8/0x13c
 [c0451df0] [c00065cc] do_softirq+0xa0/0xac
 [c0451e00] [c003280c] irq_exit+0x7c/0x9c
 [c0451e10] [c00640c4] __ipipe_sync_stage+0x248/0x24c
 [...]

This patch fixes the issue by detaching the netdev during the
time we change the configuration.

Reported-by: Lennart Sorensen <lsorense@csclub.uwaterloo.ca>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Tested-by: Lennart Sorensen <lsorense@csclub.uwaterloo.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoucc_geth: Fix empty TX queue processing
Anton Vorontsov [Thu, 24 Dec 2009 05:31:03 +0000 (05:31 +0000)]
ucc_geth: Fix empty TX queue processing

commit 7583605b6d29f1f7f6fc505b883328089f3485ad upstream.

Following oops was seen with the ucc_geth driver:

 Unable to handle kernel paging request for data at address 0x00000058
 Faulting instruction address: 0xc024f2fc
 Oops: Kernel access of bad area, sig: 11 [#1]
 [...]
 NIP [c024f2fc] skb_recycle_check+0x14/0x100
 LR [e30aa0a4] ucc_geth_poll+0xd8/0x4e0 [ucc_geth_driver]
 Call Trace:
 [df857d50] [c000b03c] __ipipe_grab_irq+0x3c/0xa4 (unreliable)
 [df857d60] [e30aa0a4] ucc_geth_poll+0xd8/0x4e0 [ucc_geth_driver]
 [df857dd0] [c0258cf8] net_rx_action+0xf8/0x1b8
 [df857e10] [c0032a38] __do_softirq+0xb8/0x13c
 [df857e60] [c00065cc] do_softirq+0xa0/0xac
 [...]

This is because ucc_geth_tx() tries to process an empty queue when
queues are logically stopped. Stopping the queues doesn't disable
polling, and since nowadays ucc_geth_tx() is actually called from
the polling routine, the oops above might pop up.

Fix this by removing 'netif_queue_stopped() == 0' check.

Reported-by: Lennart Sorensen <lsorense@csclub.uwaterloo.ca>
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Tested-by: Lennart Sorensen <lsorense@csclub.uwaterloo.ca>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoBtrfs: should add a permission check for setfacl
Shi Weihua [Tue, 18 May 2010 00:50:32 +0000 (00:50 +0000)]
Btrfs: should add a permission check for setfacl

commit 2f26afba46f0ebf155cf9be746496a0304a5b7cf upstream.

On btrfs, do the following
------------------
# su user1
# cd btrfs-part/
# touch aaa
# getfacl aaa
  # file: aaa
  # owner: user1
  # group: user1
  user::rw-
  group::rw-
  other::r--
# su user2
# cd btrfs-part/
# setfacl -m u::rwx aaa
# getfacl aaa
  # file: aaa
  # owner: user1
  # group: user1
  user::rwx           <- successed to setfacl
  group::rw-
  other::r--
------------------
but we should prohibit it that user2 changing user1's acl.
In fact, on ext3 and other fs, a message occurs:
  setfacl: aaa: Operation not permitted

This patch fixed it.

Signed-off-by: Shi Weihua <shiwh@cn.fujitsu.com>
Signed-off-by: Chris Mason <chris.mason@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agol2tp: Fix oops in pppol2tp_xmit
James Chapman [Tue, 16 Mar 2010 06:46:31 +0000 (06:46 +0000)]
l2tp: Fix oops in pppol2tp_xmit

commit 3feec9095d12e311b7d4eb7fe7e5dfa75d4a72a5 upstream.

When transmitting L2TP frames, we derive the outgoing interface's UDP
checksum hardware assist capabilities from the tunnel dst dev. This
can sometimes be NULL, especially when routing protocols are used and
routing changes occur. This patch just checks for NULL dst or dev
pointers when checking for netdev hardware assist features.

BUG: unable to handle kernel NULL pointer dereference at 0000000c
IP: [<f89d074c>] pppol2tp_xmit+0x341/0x4da [pppol2tp]
*pde = 00000000
Oops: 0000 [#1] SMP
last sysfs file: /sys/class/net/lo/operstate
Modules linked in: pppol2tp pppox ppp_generic slhc ipv6 dummy loop snd_hda_codec_atihdmi snd_hda_intel snd_hda_codec snd_pcm snd_timer snd soundcore snd_page_alloc evdev psmouse serio_raw processor button i2c_piix4 i2c_core ati_agp agpgart pcspkr ext3 jbd mbcache sd_mod ide_pci_generic atiixp ide_core ahci ata_generic floppy ehci_hcd ohci_hcd libata e1000e scsi_mod usbcore nls_base thermal fan thermal_sys [last unloaded: scsi_wait_scan]

Pid: 0, comm: swapper Not tainted (2.6.32.8 #1)
EIP: 0060:[<f89d074c>] EFLAGS: 00010297 CPU: 3
EIP is at pppol2tp_xmit+0x341/0x4da [pppol2tp]
EAX: 00000000 EBX: f64d1680 ECX: 000005b9 EDX: 00000000
ESI: f6b91850 EDI: f64d16ac EBP: f6a0c4c0 ESP: f70a9cac
 DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
Process swapper (pid: 0, ti=f70a8000 task=f70a31c0 task.ti=f70a8000)
Stack:
 000005a9 000005b9 f734c400 f66652c0 f7352e00 f67dc800 00000000 f6b91800
<0> 000005a3 f70ef6c4 f67dcda9 000005a3 f89b192e 00000246 000005a3 f64d1680
<0> f63633e0 f6363320 f64d1680 f65a7320 f65a7364 f65856c0 f64d1680 f679f02f
Call Trace:
 [<f89b192e>] ? ppp_push+0x459/0x50e [ppp_generic]
 [<f89b217f>] ? ppp_xmit_process+0x3b6/0x430 [ppp_generic]
 [<f89b2306>] ? ppp_start_xmit+0x10d/0x120 [ppp_generic]
 [<c11c15cb>] ? dev_hard_start_xmit+0x21f/0x2b2
 [<c11d0947>] ? sch_direct_xmit+0x48/0x10e
 [<c11c19a0>] ? dev_queue_xmit+0x263/0x3a6
 [<c11e2a9f>] ? ip_finish_output+0x1f7/0x221
 [<c11df682>] ? ip_forward_finish+0x2e/0x30
 [<c11de645>] ? ip_rcv_finish+0x295/0x2a9
 [<c11c0b19>] ? netif_receive_skb+0x3e9/0x404
 [<f814b791>] ? e1000_clean_rx_irq+0x253/0x2fc [e1000e]
 [<f814cb7a>] ? e1000_clean+0x63/0x1fc [e1000e]
 [<c1047eff>] ? sched_clock_local+0x15/0x11b
 [<c11c1095>] ? net_rx_action+0x96/0x195
 [<c1035750>] ? __do_softirq+0xaa/0x151
 [<c1035828>] ? do_softirq+0x31/0x3c
 [<c10358fe>] ? irq_exit+0x26/0x58
 [<c1004b21>] ? do_IRQ+0x78/0x89
 [<c1003729>] ? common_interrupt+0x29/0x30
 [<c101ac28>] ? native_safe_halt+0x2/0x3
 [<c1008c54>] ? default_idle+0x55/0x75
 [<c1009045>] ? c1e_idle+0xd2/0xd5
 [<c100233c>] ? cpu_idle+0x46/0x62
Code: 8d 45 08 f0 ff 45 08 89 6b 08 c7 43 68 7e fb 9c f8 8a 45 24 83 e0 0c 3c 04 75 09 80 63 64 f3 e9 b4 00 00 00 8b 43 18 8b 4c 24 04 <8b> 40 0c 8d 79 11 f6 40 44 0e 8a 43 64 75 51 6a 00 8b 4c 24 08
EIP: [<f89d074c>] pppol2tp_xmit+0x341/0x4da [pppol2tp] SS:ESP 0068:f70a9cac
CR2: 000000000000000c

Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agovfs: add NOFOLLOW flag to umount(2)
Miklos Szeredi [Wed, 10 Feb 2010 11:15:53 +0000 (12:15 +0100)]
vfs: add NOFOLLOW flag to umount(2)

commit db1f05bb85d7966b9176e293f3ceead1cb8b5d79 upstream.

Add a new UMOUNT_NOFOLLOW flag to umount(2).  This is needed to prevent
symlink attacks in unprivileged unmounts (fuse, samba, ncpfs).

Additionally, return -EINVAL if an unknown flag is used (and specify
an explicitly unused flag: UMOUNT_UNUSED).  This makes it possible for
the caller to determine if a flag is supported or not.

CC: Eugene Teo <eugene@redhat.com>
CC: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoCIFS: Allow null nd (as nfs server uses) on create
Steve French [Thu, 22 Apr 2010 19:21:55 +0000 (19:21 +0000)]
CIFS: Allow null nd (as nfs server uses) on create

commit fa588e0c57048b3d4bfcd772d80dc0615f83fd35 upstream.

While creating a file on a server which supports unix extensions
such as Samba, if a file is being created which does not supply
nameidata (i.e. nd is null), cifs client can oops when calling
cifs_posix_open.

Signed-off-by: Shirish Pargaonkar <shirishp@us.ibm.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agosctp: Fix skb_over_panic resulting from multiple invalid parameter errors (CVE-2010...
Neil Horman [Wed, 28 Apr 2010 10:30:59 +0000 (10:30 +0000)]
sctp: Fix skb_over_panic resulting from multiple invalid parameter errors (CVE-2010-1173) (v4)

commit 5fa782c2f5ef6c2e4f04d3e228412c9b4a4c8809 upstream.

Ok, version 4

Change Notes:
1) Minor cleanups, from Vlads notes

Summary:

Hey-
Recently, it was reported to me that the kernel could oops in the
following way:

<5> kernel BUG at net/core/skbuff.c:91!
<5> invalid operand: 0000 [#1]
<5> Modules linked in: sctp netconsole nls_utf8 autofs4 sunrpc iptable_filter
ip_tables cpufreq_powersave parport_pc lp parport vmblock(U) vsock(U) vmci(U)
vmxnet(U) vmmemctl(U) vmhgfs(U) acpiphp dm_mirror dm_mod button battery ac md5
ipv6 uhci_hcd ehci_hcd snd_ens1371 snd_rawmidi snd_seq_device snd_pcm_oss
snd_mixer_oss snd_pcm snd_timer snd_page_alloc snd_ac97_codec snd soundcore
pcnet32 mii floppy ext3 jbd ata_piix libata mptscsih mptsas mptspi mptscsi
mptbase sd_mod scsi_mod
<5> CPU:    0
<5> EIP:    0060:[<c02bff27>]    Not tainted VLI
<5> EFLAGS: 00010216   (2.6.9-89.0.25.EL)
<5> EIP is at skb_over_panic+0x1f/0x2d
<5> eax: 0000002c   ebx: c033f461   ecx: c0357d96   edx: c040fd44
<5> esi: c033f461   edi: df653280   ebp: 00000000   esp: c040fd40
<5> ds: 007b   es: 007b   ss: 0068
<5> Process swapper (pid: 0, threadinfo=c040f000 task=c0370be0)
<5> Stack: c0357d96 e0c29478 00000084 00000004 c033f461 df653280 d7883180
e0c2947d
<5>        00000000 00000080 df653490 00000004 de4f1ac0 de4f1ac0 00000004
df653490
<5>        00000001 e0c2877a 08000800 de4f1ac0 df653490 00000000 e0c29d2e
00000004
<5> Call Trace:
<5>  [<e0c29478>] sctp_addto_chunk+0xb0/0x128 [sctp]
<5>  [<e0c2947d>] sctp_addto_chunk+0xb5/0x128 [sctp]
<5>  [<e0c2877a>] sctp_init_cause+0x3f/0x47 [sctp]
<5>  [<e0c29d2e>] sctp_process_unk_param+0xac/0xb8 [sctp]
<5>  [<e0c29e90>] sctp_verify_init+0xcc/0x134 [sctp]
<5>  [<e0c20322>] sctp_sf_do_5_1B_init+0x83/0x28e [sctp]
<5>  [<e0c25333>] sctp_do_sm+0x41/0x77 [sctp]
<5>  [<c01555a4>] cache_grow+0x140/0x233
<5>  [<e0c26ba1>] sctp_endpoint_bh_rcv+0xc5/0x108 [sctp]
<5>  [<e0c2b863>] sctp_inq_push+0xe/0x10 [sctp]
<5>  [<e0c34600>] sctp_rcv+0x454/0x509 [sctp]
<5>  [<e084e017>] ipt_hook+0x17/0x1c [iptable_filter]
<5>  [<c02d005e>] nf_iterate+0x40/0x81
<5>  [<c02e0bb9>] ip_local_deliver_finish+0x0/0x151
<5>  [<c02e0c7f>] ip_local_deliver_finish+0xc6/0x151
<5>  [<c02d0362>] nf_hook_slow+0x83/0xb5
<5>  [<c02e0bb2>] ip_local_deliver+0x1a2/0x1a9
<5>  [<c02e0bb9>] ip_local_deliver_finish+0x0/0x151
<5>  [<c02e103e>] ip_rcv+0x334/0x3b4
<5>  [<c02c66fd>] netif_receive_skb+0x320/0x35b
<5>  [<e0a0928b>] init_stall_timer+0x67/0x6a [uhci_hcd]
<5>  [<c02c67a4>] process_backlog+0x6c/0xd9
<5>  [<c02c690f>] net_rx_action+0xfe/0x1f8
<5>  [<c012a7b1>] __do_softirq+0x35/0x79
<5>  [<c0107efb>] handle_IRQ_event+0x0/0x4f
<5>  [<c01094de>] do_softirq+0x46/0x4d

Its an skb_over_panic BUG halt that results from processing an init chunk in
which too many of its variable length parameters are in some way malformed.

The problem is in sctp_process_unk_param:
if (NULL == *errp)
*errp = sctp_make_op_error_space(asoc, chunk,
 ntohs(chunk->chunk_hdr->length));

if (*errp) {
sctp_init_cause(*errp, SCTP_ERROR_UNKNOWN_PARAM,
 WORD_ROUND(ntohs(param.p->length)));
sctp_addto_chunk(*errp,
WORD_ROUND(ntohs(param.p->length)),
  param.v);

When we allocate an error chunk, we assume that the worst case scenario requires
that we have chunk_hdr->length data allocated, which would be correct nominally,
given that we call sctp_addto_chunk for the violating parameter.  Unfortunately,
we also, in sctp_init_cause insert a sctp_errhdr_t structure into the error
chunk, so the worst case situation in which all parameters are in violation
requires chunk_hdr->length+(sizeof(sctp_errhdr_t)*param_count) bytes of data.

The result of this error is that a deliberately malformed packet sent to a
listening host can cause a remote DOS, described in CVE-2010-1173:
http://cve.mitre.org/cgi-bin/cvename.cgi?name=2010-1173

I've tested the below fix and confirmed that it fixes the issue.  We move to a
strategy whereby we allocate a fixed size error chunk and ignore errors we don't
have space to report.  Tested by me successfully

Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoGFS2: Fix permissions checking for setflags ioctl()
Steven Whitehouse [Mon, 24 May 2010 13:36:48 +0000 (14:36 +0100)]
GFS2: Fix permissions checking for setflags ioctl()

commit 7df0e0397b9a18358573274db9fdab991941062f upstream.

We should be checking for the ownership of the file for which
flags are being set, rather than just for write access.

Reported-by: Dan Rosenberg <dan.j.rosenberg@gmail.com>
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agowl1251: fix a memory leak in probe
Grazvydas Ignotas [Fri, 4 Jun 2010 23:25:47 +0000 (02:25 +0300)]
wl1251: fix a memory leak in probe

commit aa679c36756003f1fabdb9fc6f00eb159559f7c3 upstream.

wl1251_sdio_probe() error path is missing wl1251_free_hw, add it.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Acked-by: Kalle Valo <kvalo@adurom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoiwlwifi: update supported PCI_ID list for 5xx0 series
Wey-Yi Guy [Fri, 20 Nov 2009 20:05:03 +0000 (12:05 -0800)]
iwlwifi: update supported PCI_ID list for 5xx0 series

commit ac592574a577162183b5c1dd040a188caa068a29 upstream.

Update the PCI_ID list for 5xx0 series.
Remove all the PCI_IDs which never made into production or not longer in
production.

Also make sure the supported bands(a/b/g/n) match specified PCI_IDs

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoiwlwifi: recalculate average tpt if not current
Reinette Chatre [Mon, 3 May 2010 17:55:07 +0000 (10:55 -0700)]
iwlwifi: recalculate average tpt if not current

commit 3d79b2a9eeaa066b35c49fbb17e3156a3c482c3e upstream.

We currently have this check as a BUG_ON, which is being hit by people.
Previously it was an error with a recalculation if not current, return that
code.

The BUG_ON was introduced by:
commit 3110bef78cb4282c58245bc8fd6d95d9ccb19749
Author: Guy Cohen <guy.cohen@intel.com>
Date:   Tue Sep 9 10:54:54 2008 +0800

    iwlwifi: Added support for 3 antennas

... the portion adding the BUG_ON is reverted since we are encountering the error
and BUG_ON was created with assumption that error is not encountered.

Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoiwlwifi: check for aggregation frame and queue
Wey-Yi Guy [Wed, 3 Feb 2010 20:24:44 +0000 (12:24 -0800)]
iwlwifi: check for aggregation frame and queue

commit 45d427001b5eec03cecaacddb53c73af46bb263e upstream.

Error checking for aggregation frames should go into aggregation queue,
if aggregation queue not available, use legacy queue instead.
Also make sure the aggregation queue is available to activate,
if driver and mac80211 is out-of-sync, try to disable the queue and
sync-up with mac80211.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agowrong type for 'magic' argument in simple_fill_super()
Roberto Sassu [Thu, 3 Jun 2010 09:58:28 +0000 (11:58 +0200)]
wrong type for 'magic' argument in simple_fill_super()

commit 7d683a09990ff095a91b6e724ecee0ff8733274a upstream.

It's used to superblock ->s_magic, which is unsigned long.

Signed-off-by: Roberto Sassu <roberto.sassu@polito.it>
Reviewed-by: Mimi Zohar <zohar@us.ibm.com>
Signed-off-by: Eric Paris <eparis@redhat.com>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agodrm/i915: give up on 8xx lid status
Jesse Barnes [Fri, 12 Feb 2010 17:30:00 +0000 (09:30 -0800)]
drm/i915: give up on 8xx lid status

commit 7b9c5abee98c54f85bcc04bd4d7ec8d5094c73f4 upstream.

These old machines more often than not lie about their lid state.  So
don't use it to detect LVDS presence, but leave the event handler to
deal with lid open/close, when we might need to reset the mode.

Fixes kernel bug #15248

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Eric Anholt <eric@anholt.net>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agoath9k: add support for 802.11n bonded out AR2427
Luis R. Rodriguez [Tue, 2 Feb 2010 16:58:33 +0000 (11:58 -0500)]
ath9k: add support for 802.11n bonded out AR2427

commit 5ffaf8a361b4c9025963959a744f21d8173c7669 upstream.

Some single chip family devices are sold in the market with
802.11n bonded out, these have no hardware capability for
802.11n but ath9k can still support them. These are called
AR2427.

[bwh: backported to 2.6.32]
Reported-by: Rolf Leggewie <bugzilla.kernel.org@rolf.leggewie.biz>
Tested-by: Bernhard Reiter <ockham@raz.or.at>
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
14 years agowireless: report reasonable bitrate for MCS rates through wext
John W. Linville [Wed, 9 Dec 2009 21:43:52 +0000 (16:43 -0500)]
wireless: report reasonable bitrate for MCS rates through wext

commit 254416aae70ab2e6b57fd79782c8a67196234d02 upstream.

Previously, cfg80211 had reported "0" for MCS (i.e. 802.11n) bitrates
through the wireless extensions interface.  However, nl80211 was
converting MCS rates into a reasonable bitrate number.  This patch moves
the nl80211 code to cfg80211 where it is now shared between both the
nl80211 interface and the wireless extensions interface.

Signed-off-by: John W. Linville <linville@tuxdriver.com>
Cc: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>