iio: common: ssp_sensors: Protect PM-only functions to kill warning
If CONFIG_PM_SLEEP=n:
drivers/iio/common/ssp_sensors/ssp_dev.c:644: warning: ‘ssp_suspend’ defined but not used
drivers/iio/common/ssp_sensors/ssp_dev.c:669: warning: ‘ssp_resume’ defined but not used
Protect the unused functions by #ifdef CONFIG_PM_SLEEP to fix this.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Karol Wrona <k.wrona@samsung.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Roberta Dobrescu [Thu, 12 Feb 2015 21:00:14 +0000 (23:00 +0200)]
iio: light: jsa1212: Select REGMAP_I2C
This patch adds missing 'select' statement for jsa1212 driver.
Without regmap_i2c, we get the following error when loading the module:
Unknown symbol devm_regmap_init_i2c.
Signed-off-by: Roberta Dobrescu <roberta.dobrescu@gmail.com> Reviewed-by: Daniel Baluta <daniel.baluta@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Chen Weixiang [Thu, 5 Feb 2015 13:24:41 +0000 (21:24 +0800)]
staging: lustre: lustre: libcfs: define symbols as static
This patch fixes the following warning using sparse
- warning: symbol 'libcfs_debug_mb' was not declared. Should it be
static?
- warning: symbol 'portal_enter_debugger' was not declared. Should
it be static?
staging: rtl8188eu: core: switch with redundant cases
A few redundant switch cases as well as a redundant if/else
within one of the cases was consolidated to a single call.
The cases are intentionally retained for documentation purposes.
case WIFI_REASSOCREQ,WIFI_PROBEREQ,WIFI_BEACON,WIFI_ACTION all
have the same effect - notably the also for WIFI_PROBEREQ where
the if/else is executing the same function.
These redundant cases could all be dropped and consolidated into
the default but probably it is better for documentation/readability
to leave them in the switch/case explicitly.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: rtl8188eu: odm: conditional setting with no effect
The if and the else branch code are identical - so the condition has no
effect on the effective code - this patch removes the condition and the
duplicated code. Due to this being a fall-through-if here - the first
if condition has no effect either - so it also can be removed.
struct mlme_priv is thus also no longer needed here.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The if and the else branch code are identical - so the condition has no
effect on the effective code - this patch removes the condition and the
duplicated code.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: rtl8723au: multiple condition with no effect - if identical to else
A number if/else if/else branches are identical - so the condition has no
effect on the effective code and can be significantly simplified - this
patch removes the condition and the duplicated code.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Oleg Drokin [Mon, 2 Feb 2015 02:52:19 +0000 (21:52 -0500)]
staging/lustre/mdc: Initialize req in mdc_enqueue for !it case
Commit ab909585b813 ("staging: lustre: Cleanup variable declarations
in mdc_enqueue()") broke Lustre flock handling introducing access
to uninitialized req variable, leading to bizzare crash in a later
call to __req_capsule_offset with invalid pill value.
Set req to NULL just for this case as in all other cases req is
explicitly initialized with request packing call.
Lai Siyao [Mon, 2 Feb 2015 02:52:17 +0000 (21:52 -0500)]
staging/lustre/llite: don't add to page cache upon failure
Reading directory pages may fail on MDS, in this case client should
not cache a non-up-to-date directory page, because it will cause
a later read on the same page fail.
wang di [Mon, 2 Feb 2015 02:52:14 +0000 (21:52 -0500)]
staging/lustre/fld: refer to MDT0 for fld lookup in some cases
It is possible that when fld client is trying to lookup seq
on one of MDT, but the connection between the client and the MDT
is not being initialized yet, especially during striped dir creation,
because client will only send create req to the master MDT, then
master MDT will distribute the operation to all of other MDT, instead
of client distributing these requests, which will usually trigger
the connection.
In this case, we will send the fld request to MDT0, since it has
all of location information.
Signed-off-by: wang di <di.wang@intel.com>
Reviewed-on: http://review.whamcloud.com/11780
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-4855 Reviewed-by: Fan Yong <fan.yong@intel.com> Reviewed-by: Mike Pershin <mike.pershin@intel.com> Signed-off-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Jinshan Xiong [Mon, 2 Feb 2015 02:52:13 +0000 (21:52 -0500)]
staging/lustre/llite: Solve a race to access lli_has_smd in read case
In vvp_io_read_lock(), it used to decide if to add read lock by
checking lli_has_smd. Accessing lli_has_smd is racy when an empty
file is turned into raid0, therefore, it may result in read requests
are issued without corresponding lock.
Henri Doreau [Mon, 2 Feb 2015 02:52:09 +0000 (21:52 -0500)]
staging/lustre/obdclass: Proper swabbing of llog_rec_tail.
A variable-length structure preceeds llog_rec_tail within an llog
block. Thus cr_tail shouldn't be accessed directly as a structure
member but its actual location should be computed dynamically.
Li Xi [Mon, 2 Feb 2015 02:52:03 +0000 (21:52 -0500)]
staging/lustre/libcfs: fix illegal page access of tracefiled()
After failure happens and put_pages_back() returns the pages,
tracefiled() should not go on itering on the page list.
Otherwise, some pages might be accessed illegally.
Signed-off-by: Li Xi <lixi@ddn.com> Signed-off-by: Jian Yu <jian.yu@intel.com>
Reviewed-on: http://review.whamcloud.com/11454
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5126 Reviewed-by: Emoly Liu <emoly.liu@intel.com> Reviewed-by: Niu Yawei <yawei.niu@intel.com> Signed-off-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
lustre_update.h containts various server-side structures that are
not really relevant for the client.
Also remove the only user of this file that does not actually need it.
Li Xi [Mon, 2 Feb 2015 02:52:02 +0000 (21:52 -0500)]
staging/lustre/ldlm: high load because of negative timeout
When the time of LRU resizing exceeds waiting period of
recalculation, the ldlm daemon will keep on resizing without any
interval of rest. That will cause high CPU load.
This patch fixes the problem by setting the recalculation timestamp
after LRU resizing finishes rather than before it. What is more, an
interval of one second is enforced between each recalculation.
Signed-off-by: Li Xi <lixi@ddn.com>
Reviewed-on: http://review.whamcloud.com/11227
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5415 Reviewed-by: Dmitry Eremin <dmitry.eremin@intel.com> Reviewed-by: Bobi Jam <bobijam@gmail.com> Reviewed-by: Lai Siyao <lai.siyao@intel.com> Signed-off-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Liang Zhen [Mon, 2 Feb 2015 02:52:00 +0000 (21:52 -0500)]
staging/lustre/ptlrpc: avoid list scan in ptlrpcd_check
ptlrpcd_check() always scan all requests on ptlrpc_request_set
and try to finish completed requests, this is low efficiency.
Even worse, l_wait_event() always checks condition for twice
before sleeping and one more time after waking up, which means
it will call ptlrpcd_check() for three times in each loop.
This patch will move completed requests at the head of list
in ptlrpc_check_set(), with this change ptlrpcd_check doesn't
need to scan all requests anymore.
Signed-off-by: Liang Zhen <liang.zhen@intel.com>
Reviewed-on: http://review.whamcloud.com/11513
Intel-bug-id: https://jira.hpdd.intel.com/browse/LU-5548 Reviewed-by: Bobi Jam <bobijam@gmail.com> Reviewed-by: Andreas Dilger <andreas.dilger@intel.com> Reviewed-by: Johann Lombardi <johann.lombardi@intel.com> Signed-off-by: Oleg Drokin <oleg.drokin@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
osc_init() is marked as the module_init function in osc_request.c
and is never used anywhere else. Hence, it can (and should) be
declared static.
sparse also complained about this with the following warning, which
is fixed by this patch.
andreas@workbox:~/linux-next$ make C=1 M=drivers/staging/lustre/lustre/osc/
[...]
drivers/staging/lustre/lustre/osc/osc_request.c:3335:12: warning:
symbol 'osc_init' was not declared. Should it be static?
[...]
Signed-off-by: Andreas Ruprecht <rupran@einserver.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is only an API consolidation to make things more readable.
Instances of var * HZ / 1000 are replaced by msecs_to_jiffies(var).
As msecs_to_jiffies will return > 0 if it is passed a value > 0 the
== 0 check is not needed.
Signed-off-by: Nicholas Mc Guire <der.herr@hofr.at> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Aaro Koskinen [Sun, 1 Feb 2015 15:01:33 +0000 (17:01 +0200)]
staging: xgifb: fix colours on big-endian machines other than powerpc
XGI framebuffer supports big-endian machines, but it's currently
enabled based on __powerpc__ define (which is wrong, as powerpc can
be also little-endian now). Use __BIG_ENDIAN instead. This will fix
wrong colours on such machines.
Tested on parisc with XGI Z7.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch modifies the seq_printf statements in
drivers/staging/lustre/lustre/osc/lproc_osc.c file.
It changes it to seq_puts and seq_putc wherever applicable.
This function is an awkward helper for nbu2ss_drv_ep_init(). Most of
its logic is devoted to determining if the current endpoint is ep0,
something the caller can easily do in a single line. And there is not
a lot going on beyond that.
Move this logic up into nbu2ss_drv_ep_init(). The result is much easier
to understand and the resulting function is still viewable within a
single screen.
Signed-off-by: Chris Rorvick <chris@rorvick.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Simon Guo [Thu, 29 Jan 2015 05:33:17 +0000 (13:33 +0800)]
STAGING: Fix pcl818.c coding style issue: code indent should use tabs where possible
Correct one coding style problem(detected by checkpatch.pl) in pcl818.c.
- code indent should use tabs where possible
It is fixed by reformatting the comment block to usual comment style.
And with the reformatting, following coding style problem is also fixed:
- please, no space before tabs
Signed-off-by: Simon Guo <wei.guo.simon@gmail.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: dt282x: condition with no effect - if identical to else
The if and the else branch code are identical - so the condition has no
effect on the effective code - this patch removes the condition and the
duplicated code.
Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 30 Jan 2015 09:57:26 +0000 (09:57 +0000)]
staging: comedi: comedi_pcmcia.h: move PCMCIA stuff out of comedidev.h
Move the PCMCIA-specific stuff out of "comedidev.h" into
"comedi_pcmcia.h". Comedi PCMCIA drivers now include "comedi_pcmcia.h"
instead of "comedidev.h", which now gets pulled in indirectly.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 30 Jan 2015 09:57:25 +0000 (09:57 +0000)]
staging: comedi: quatech_daqp_cs: include new "comedi_pcmcia.h" header
Include the new "../comedi_pcmcia.h" header instead of
<pcmcia/cistpl.h>, <pcmcia/cisreg.h>, <pcmcia/ds.h> and
"../comedidev.h". <pcmcia/cisreg.h> isn't needed and the others will
now get included indirectly.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 30 Jan 2015 09:57:23 +0000 (09:57 +0000)]
staging: comedi: ni_labpc_cs: include new "comedi_pcmcia.h" header
Include the new "../comedi_pcmcia.h" header instead of
<pcmcia/cistpl.h>, <pcmcia/cisreg.h>, <pcmcia/ds.h> and
"../comedidev.h". <pcmcia/cisreg.h> isn't needed and the others will
now get included indirectly.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 30 Jan 2015 09:57:22 +0000 (09:57 +0000)]
staging: comedi: ni_daq_dio24: include new "comedi_pcmcia.h" header
Include the new "../comedi_pcmcia.h" header instead of
<pcmcia/cistpl.h>, <pcmcia/cisreg.h>, <pcmcia/ds.h> and
"../comedidev.h". <pcmcia/cisreg.h> isn't needed and the others will
now get included indirectly.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Ian Abbott [Fri, 30 Jan 2015 09:57:17 +0000 (09:57 +0000)]
staging: comedi: add comedi_pcmcia.h
Add a new header that Comedi PCMCIA drivers can include instead of
"comedidev.h". Currently, it just pulls in <pcmcia/cistpl.h>,
<pcmcia/ds.h> and "comedidev.h", but the plan is to migrate the
PCMCIA-specific stuff from "comedidev.h" here.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The unlocked_ioctl handler in "comedi_fops.c" calls a different function
to handle each supported ioctl command code. Most of these have a block
comment indicating which command code it handles, a brief description,
and an informal description of the inputs and outputs. These block
comments were formatted in various styles, but have been reformatted to
use the usual block comment style.
The block comment for the handler function for the `COMEDI_RANGEINFO`
ioctl code is in "range.c". Reformat it to use the usual block command
style to match the others. Reword it a bit for consistency.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The unlocked_ioctl handler calls a different function to handle each
supported ioctl command code. Most of these have a block comment
indicating which command code it handles, a brief description, and an
informal description of the inputs and outputs. These block comments
are formatted in various styles. Reformat them to the usual block
comment style and do a bit of rewording for consistency. The comment
block for the `COMEDI_CMD` ioctl is missing, so add one.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk> Reviewed-by: H Hartley Sweeten <hsweeten@visionengravers.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: addi_apci_1500: fix array access out of bounds error
The private data 'pm', 'pt', and 'pp' array members hold the trigger mode
parameters for ports A and B. Both ports are 8-bits and the arrays are 16-bits.
Array index 0 defines the AND mode and index 1 the OR mode parameters for both
ports.
The valid triggers to start the async command are 0 to 3 which select the
AND/OR mode for each port.
The 'pb_trig' (the array index for port B) in apci1500_di_inttrig_start() is
incorrect and results in an index of 0 or 2. Fix the calc so that the correct
index (0/1) is used.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Reported-by: Asaf Vertz <asaf.vertz@tandemg.com> Reviewed-by: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Alan Cox [Tue, 3 Feb 2015 13:18:55 +0000 (13:18 +0000)]
i2o: move to staging
The I2O layer deals with a technology that to say the least didn't catch on
in the market.
The only relevant products are some of the AMI MegaRAID - which supported I2O
and its native mode (The native mode is faster and runs on Linux), an
obscure crypto ethernet card that's now so many years out of date nobody
would use it, the old DPT controllers, which speak their own dialect and
have their own driver - and ermm.. thats about it.
We also know the code isn't in good shape as recently a patch was proposed
and queried as buggy, which in turn showed the existing code was broken
already by prior "clean up" and nobody had noticed that either.
It's coding style robot code nothing more. Like some forgotten corridor
cleaned relentlessly by a lost Roomba but where no user has trodden in years.
Move it to staging and then to /dev/null.
The headers remain as they are shared with dpt_i2o.
Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Linus Torvalds [Sun, 1 Feb 2015 21:20:47 +0000 (13:20 -0800)]
Merge tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Olof Johansson:
"One more week's worth of fixes. Worth pointing out here are:
- A patch fixing detaching of iommu registrations when a device is
removed -- earlier the ops pointer wasn't managed properly
- Another set of Renesas boards get the same GIC setup fixup as
others have in previous -rcs
- Serial port aliases fixups for sunxi. We did the same to tegra but
we caught that in time before the merge window due to more machines
being affected. Here it took longer for anyone to notice.
- A couple more DT tweaks on sunxi
- A follow-up patch for the mvebu coherency disabling in last -rc
batch"
* tag 'armsoc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
arm: dma-mapping: Set DMA IOMMU ops in arm_iommu_attach_device()
ARM: shmobile: r8a7790: Instantiate GIC from C board code in legacy builds
ARM: shmobile: r8a73a4: Instantiate GIC from C board code in legacy builds
ARM: mvebu: don't set the PL310 in I/O coherency mode when I/O coherency is disabled
ARM: sunxi: dt: Fix aliases
ARM: dts: sun4i: Add simplefb node with de_fe0-de_be0-lcd0-hdmi pipeline
ARM: dts: sun6i: ippo-q8h-v5: Fix serial0 alias
ARM: dts: sunxi: Fix usb-phy support for sun4i/sun5i
Linus Torvalds [Sun, 1 Feb 2015 20:23:32 +0000 (12:23 -0800)]
sched: don't cause task state changes in nested sleep debugging
Commit 8eb23b9f35aa ("sched: Debug nested sleeps") added code to report
on nested sleep conditions, which we generally want to avoid because the
inner sleeping operation can re-set the thread state to TASK_RUNNING,
but that will then cause the outer sleep loop not actually sleep when it
calls schedule.
However, that's actually valid traditional behavior, with the inner
sleep being some fairly rare case (like taking a sleeping lock that
normally doesn't actually need to sleep).
And the debug code would actually change the state of the task to
TASK_RUNNING internally, which makes that kind of traditional and
working code not work at all, because now the nested sleep doesn't just
sometimes cause the outer one to not block, but will cause it to happen
every time.
In particular, it will cause the cardbus kernel daemon (pccardd) to
basically busy-loop doing scheduling, converting a laptop into a heater,
as reported by Bruno Prémont. But there may be other legacy uses of
that nested sleep model in other drivers that are also likely to never
get converted to the new model.
This fixes both cases:
- don't set TASK_RUNNING when the nested condition happens (note: even
if WARN_ONCE() only _warns_ once, the return value isn't whether the
warning happened, but whether the condition for the warning was true.
So despite the warning only happening once, the "if (WARN_ON(..))"
would trigger for every nested sleep.
- in the cases where we knowingly disable the warning by using
"sched_annotate_sleep()", don't change the task state (that is used
for all core scheduling decisions), instead use '->task_state_change'
that is used for the debugging decision itself.
(Credit for the second part of the fix goes to Oleg Nesterov: "Can't we
avoid this subtle change in behaviour DEBUG_ATOMIC_SLEEP adds?" with the
suggested change to use 'task_state_change' as part of the test)
Reported-and-bisected-by: Bruno Prémont <bonbons@linux-vserver.org> Tested-by: Rafael J Wysocki <rjw@rjwysocki.net> Acked-by: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de>, Cc: Ilya Dryomov <ilya.dryomov@inktank.com>, Cc: Mike Galbraith <umgwanakikbuti@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Peter Hurley <peter@hurleysoftware.com>, Cc: Davidlohr Bueso <dave@stgolabs.net>, Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Olof Johansson [Sun, 1 Feb 2015 16:51:12 +0000 (08:51 -0800)]
Merge tag 'renesas-soc-fixes3-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes
Merge "Third Round of Renesas ARM Based SoC Fixes for v3.19" from Simon Horman:
* Instantiate GIC from C board code in legacy builds on r8a7790 and r8a73a4
* tag 'renesas-soc-fixes3-for-v3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: r8a7790: Instantiate GIC from C board code in legacy builds
ARM: shmobile: r8a73a4: Instantiate GIC from C board code in legacy builds
Also, one documentation update (da9063), so some devicetrees can now
be verified"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: sh_mobile: terminate DMA reads properly
i2c: Only include slave support if selected
i2c: s3c2410: fix ABBA deadlock by keeping clock prepared
i2c: slave-eeprom: fix boundary check when using sysfs
i2c: st: Rename clock reference to something that exists
DT: i2c: Add devices handled by the da9063 MFD driver
Merge tag 'iio-for-3.20b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-testing
Jonathan writes:
Second round of IIO new drivers, functionality and cleanups for the 3.20 cycle.
New drivers and device support:
* Capella cm3232 ambient light sensor driver.
* Freescale MMA9553 pedometer and activity monitor. Note this involved a
refactor of the mma9551 driver to pull out shared elements.
* Samsung sensor hub (as used in the galaxy gear 2 watch) Core support
and initial drivers (gyro and accelerometer) more to follow.
An additional fix was applied on top of this for a build issue
thrown up by the autobuilders on some platforms.
* Cosmic Circuits 10001 ADC driver
* Qualcomm SPMI PMIC voltage ADC driver (current adc merged a while back).
* Add binding for AK8963 (in capitals) as unfortunately there are bios'
out there not using lower case.
New functionality
* Add newe operating mode to the core to allow for non triggered software
buffers. This is mostly semantics as previously drivers just claimed they
had a hardware buffer (when they didn't).
* Add distance channel type.
* Add energy channel type.
* Add velocity channel type and IIO_MOD_ROOT_SUM_SQUARED (i.e. speed when
our channel type is velocity).
* Add _debounce_count and _debounce_time filter attributes. Only really
make sense for counting types of measurements. First use is for avoiding
miss detection of steps prior to walking.
* Add change event type. This replaces the briefly present INSTANCE type
(which hadn't gained any users). It is more generic as it allows for
events say every 10 steps rather than every step.
* Add _calibweight attributes to the ABI (and core support). Used by
activity monitors to estimate energy use. Can imagine there will be
other uses for this one.
Driver new functionality
* mma9551 gains runtime pm support.
* hid-sensors gain PM support.
Cleanup
* Change calibheight unit to m from cm. As there are no prior users
and this was inconsistent with other distance units, it makes sense
to fix it before hte mma9553 driver which uses it.
* mpu6050 cleanups and devm_ use.
* as3935 switch over to PM ops.
* Fix a few format strings for signed vs unsigned.
* Fix tcs3414 missindentation
* Typo in industrialio-event
* Stop requiring IIO_TRIGGER for IIO_KFIFO_BUF as we have drivers that don't
need it. No one is quite sure why that dependency was there and it
seems to not matter.
Jonathan Cameron [Sat, 31 Jan 2015 09:41:14 +0000 (09:41 +0000)]
iio:common:ssp_sensors fix warnings due to 32 bit instead of 64 bit passed to do_div
Also change to div64_u64 in one place to avoid loss of precision
(was dividing a 32 bit number by a 64 bit number, but casting this
to 64 bit divided by 32 bit) Those divide functions certainly have
esoteric naming!
Fixes warnings with asm-generic/div64.h do_div such as:
In file included from drivers/iio/common/ssp_sensors/ssp_iio.c:20:0:
drivers/iio/common/ssp_sensors/ssp_iio_sensor.h: In function 'ssp_convert_to_freq':
>> drivers/iio/common/ssp_sensors/ssp_iio_sensor.h:56:16: warning: comparison of distinct pointer types lacks a cast [enabled by default]
drivers/iio/common/ssp_sensors/ssp_iio_sensor.h:56:2: warning: right shift count >= width of type [enabled by default]
>> drivers/iio/common/ssp_sensors/ssp_iio_sensor.h:56:2: warning: passing argument 1 of '__div64_32' from incompatible pointer type [enabled by default]
include/asm-generic/div64.h:35:17: note: expected 'uint64_t *' but argument is of type 'int *'
drivers/iio/common/ssp_sensors/ssp_iio.c: In function 'ssp_common_process_data':
include/linux/iio/buffer.h:142:32: warning: 'calculated_time' may be used uninitialized in this function [-Wuninitialized]
drivers/iio/common/ssp_sensors/ssp_iio.c:83:10: note: 'calculated_time' was declared here
Fixed by using straight coded version as per the description in the
div64.h header, thus ensuring no issue with 32 bit integers.
Reported-by: kbuild test robot <fengguang.wu@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
Linus Torvalds [Sat, 31 Jan 2015 03:49:44 +0000 (19:49 -0800)]
Merge tag 'char-misc-3.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are two tiny patches, one fixing up the drivers/Kconfig file, and
one adding a MAINTAINERS entry for the UIO git tree"
* tag 'char-misc-3.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
drivers/Kconfig: remove duplicate entry for soc
MAINTAINERS: add git url entry for UIO
Linus Torvalds [Sat, 31 Jan 2015 03:44:56 +0000 (19:44 -0800)]
Merge tag 'staging-3.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging tree fixes from Greg KH:
"Here are two tiny staging tree fixes. One for the nvec driver to
resolve a reported problem, and one to add a MAINTAINERS entry for the
Android drivers"
* tag 'staging-3.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
MAINTAINERS: add Android driver entries
staging: nvec: specify a platform-device base id
Linus Torvalds [Sat, 31 Jan 2015 03:35:35 +0000 (19:35 -0800)]
Merge tag 'usb-3.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small USB fixes and quirk additions for 3.19-rc7.
All have been in linux-next for a while with no reported problems"
* tag 'usb-3.19-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: Add OTG PET device to TPL
usb-storage/SCSI: blacklist FUA on JMicron 152d:2566 USB-SATA controller
uas: Add no-report-opcodes quirk for Simpletech devices with id 4971:8017
storage: Revise/fix quirk for 04E6:000F SCM USB-SCSI converter
usb: phy: never defer probe in non-OF case
usb: dwc2: call dwc2_is_controller_alive() under spinlock
Linus Torvalds [Fri, 30 Jan 2015 22:34:55 +0000 (14:34 -0800)]
Merge branch 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Ingo Molnar:
"Mostly tooling fixes, but also an event groups fix, two PMU driver
fixes and a CPU model variant addition"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf: Tighten (and fix) the grouping condition
perf/x86/intel: Add model number for Airmont
perf/rapl: Fix crash in rapl_scale()
perf/x86/intel/uncore: Move uncore_box_init() out of driver initialization
perf probe: Fix probing kretprobes
perf symbols: Introduce 'for' method to iterate over the symbols with a given name
perf probe: Do not rely on map__load() filter to find symbols
perf symbols: Introduce method to iterate symbols ordered by name
perf symbols: Return the first entry with a given name in find_by_name method
perf annotate: Fix memory leaks in LOCK handling
perf annotate: Handle ins parsing failures
perf scripting perl: Force to use stdbool
perf evlist: Remove extraneous 'was' on error message
Linus Torvalds [Fri, 30 Jan 2015 21:46:04 +0000 (13:46 -0800)]
Merge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull quota and UDF fix from Jan Kara:
"A fix for UDF to properly free preallocated blocks and a fix for quota
so that Q_GETQUOTA quotactl reports correct numbers for XFS filesystem
(and similarly Q_XGETQUOTA quotactl works properly for other
filesystems)"
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
quota: Switch ->get_dqblk() and ->set_dqblk() to use bytes as space units
udf: Release preallocation on last writeable close
Irina Tirdea [Thu, 29 Jan 2015 18:45:10 +0000 (18:45 +0000)]
iio: add driver for Freescale MMA9553
Add support for Freescale MMA9553L Intelligent Pedometer Platform.
The following functionalities are supported:
- step counter (counts the number of steps using a HW register)
- step detector (generates an iio event at every step the user takes)
- activity recognition (rest, walking, jogging, running)
- speed
- calories
- distance
To get accurate pedometer results, the user's height, weight and gender
need to be configured.
The specifications can be downloaded from:
http://www.freescale.com/files/sensors/doc/ref_manual/MMA955xLSWRM.pdf
http://www.freescale.com/files/sensors/doc/ref_manual/MMA9553LSWRM.pdf
Signed-off-by: Irina Tirdea <irina.tirdea@intel.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
projects / linux-beck.git / log