Fix this build error when CONFIG_WIRELESS_EXT is not set
at76_usb.c:5322: error: 'struct net_device' has no member named 'wireless_data'
at76_usb.c:5325: error: 'struct net_device' has no member named 'wireless_handlers'
Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Richard Ash [Thu, 20 Aug 2009 10:25:12 +0000 (11:25 +0100)]
Staging: quatech_usb2: Improvements to set_termios method
This patch implements several improvements to the set_termios method
suggested by Alan Cox:
* Correct check for whether any changes are being requested.
* Inform callers that mark/space parity isn't supported by always
clearing the bit.
* Pass back the actual used baud rate in case it doesn't match what was
requested.
Remaining known issues are that IXANY flow control is not supported, but
we don't tell the caller that, and input and output XON/XOFF flow
control are either both on or both off, but we don't indicate that back
to the caller either.
Signed-off-by: Richard Ash <richard@audacityteam.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Richard Ash [Thu, 20 Aug 2009 10:24:59 +0000 (11:24 +0100)]
Staging: quatech_usb2: Improve debug output and fix write_room
This patch contains changes made in the course of successfully reading
data from the device. These consist of a number of corrections and
additions to debug messages, and a fix for incorrect calculation of the
number of characters in the device FIFO which affected the operation of
the write_room method.
The use of semaphores to control access to port settings is replaced by
the preferred use of mutexes as this is the only code that uses them.
Aug 18 17:09:32 [kernel] BUG: unable to handle kernel paging request at f82f122c
Aug 18 17:09:32 [kernel] IP: [<c11e1a63>] tty_port_close_start+0x8c/0x15e
Aug 18 17:09:32 [kernel] *pde = 00000000
Aug 18 17:09:32 [kernel] Modules linked in: snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss nls_iso8859_1 cifs xt_limit xt_NFLOG nfnetlink_log nfnetlink xt_tcpudp nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack iptable_filter ip_tables x_tables i915 fb drm i2c_algo_bit cfbcopyarea i2c_core video backlight output cfbimgblt cfbfillrect quatech_usb2(C) usbserial uhci_hcd ehci_hcd snd_intel8x0 snd_ac97_codec ac97_bus usbcore tg3 snd_pcm snd_timer libphy snd intel_agp psmouse evdev ohci1394 soundcore ide_cd_mod cdrom ieee1394 snd_page_alloc agpgart floppy
Aug 18 17:09:32 [kernel] Pid: 4192, comm: cat Tainted: G C (2.6.31-rc6-gkh #9) HP Compaq dc5100 MT(PW097ET)
Aug 18 17:09:32 [kernel] EIP: 0060:[<c11e1a63>] EFLAGS: 00010046 CPU: 0
Aug 18 17:09:32 [kernel] EIP is at tty_port_close_start+0x8c/0x15e
Aug 18 17:09:32 [kernel] EAX: 00000000 EBX: 00000246 ECX: ebacc380 EDX: 00000000
Aug 18 17:09:32 [kernel] ESI: f72f1204 EDI: e6073000 EBP: e60b3ce4 ESP: e60b3ccc
Aug 18 17:09:32 [kernel] DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
Aug 18 17:09:32 [kernel] bcc17886e60b3d2cbcc17886f72f1200f72f1204e6073000e60b3d10f8b01a67
Aug 18 17:09:32 [kernel] <0> 00000000e60b3d10c11d9343e60730a0ebacc380bcc17886e607300000000000
Aug 18 17:09:32 [kernel] <0> ebacc380e60b3d90c11da71c00000000f7802480bcc17886ebacc38000000000
Aug 18 17:09:32 [kernel] [<f8b01a67>] ? serial_close+0x3c/0x9a [usbserial]
Aug 18 17:09:32 [kernel] [<c11d9343>] ? tty_fasync+0x63/0xe3
Aug 18 17:09:32 [kernel] [<c11da71c>] ? tty_release_dev+0x159/0x47d
Aug 18 17:09:32 [kernel] [<c11804c5>] ? prio_tree_remove+0x6c/0xc5
Aug 18 17:09:32 [kernel] [<c1081c5f>] ? put_object+0x46/0x5e
Aug 18 17:09:32 [kernel] [<c11daa59>] ? tty_release+0x19/0x35
Aug 18 17:09:32 [kernel] [<c1086836>] ? __fput+0xed/0x1e4
Aug 18 17:09:32 [kernel] [<c1086951>] ? fput+0x24/0x39
Aug 18 17:09:32 [kernel] [<c108375e>] ? filp_close+0x4c/0x7b
Aug 18 17:09:32 [kernel] [<c1028076>] ? put_files_struct+0xc3/0xd2
Aug 18 17:09:32 [kernel] [<c10280b1>] ? exit_files+0x2c/0x40
Aug 18 17:09:32 [kernel] [<c1028551>] ? do_exit+0xd0/0x5f5
Aug 18 17:09:32 [kernel] [<c1031751>] ? recalc_sigpending+0x1b/0x4b
Aug 18 17:09:32 [kernel] [<c1031b8b>] ? dequeue_signal+0x96/0x154
Aug 18 17:09:32 [kernel] [<c1028ab1>] ? do_group_exit+0x3b/0x77
Aug 18 17:09:32 [kernel] [<c1032ec3>] ? get_signal_to_deliver+0x140/0x31b
Aug 18 17:09:32 [kernel] [<c11d90af>] ? tty_put_char+0x43/0x4b
Aug 18 17:09:32 [kernel] [<c1002633>] ? do_notify_resume+0xae/0x7fb
Aug 18 17:09:32 [kernel] [<c11dabcd>] ? tty_read+0x8f/0xb5
Aug 18 17:09:32 [kernel] [<c11dd0be>] ? n_tty_read+0x0/0x5d2
Aug 18 17:09:32 [kernel] [<c1085560>] ? vfs_read+0xb4/0x178
Aug 18 17:09:32 [kernel] [<c11dab3e>] ? tty_read+0x0/0xb5
Aug 18 17:09:32 [kernel] [<c10856e4>] ? sys_read+0x52/0x8b
Aug 18 17:09:32 [kernel] [<c1002f6a>] ? work_notifysig+0x13/0x19
Aug 18 17:09:32 [kernel] ---[ end trace 16f434ec7e2925bc ]---
Aug 18 17:09:32 [kernel] Fixing recursive fault but reboot is needed!
My guess is that my driver is doing something "wrong" in terms of it's
interface to the higher level layers and so is causing the oops. Are
there any mechanisms to turn on more checking / debugging in the layers
above the usb-serial layer to try and catch the cause of the problem?
I've already got USB_DEBUG enabled, what others might be relevant
(presumably USB_SERIAL_DEBUG isn't)?
Signed-off-by: Richard Ash <richard@audacityteam.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Richard Ash [Thu, 20 Aug 2009 10:24:49 +0000 (11:24 +0100)]
Staging: quatech_usb2: vendor implementation of break_ctl
This patch imports the implementation of the break_ctl, throttle and
unthrottle methods from the vendor driver into the staging driver. This
compiles but is not yet tested.
Signed-off-by: Richard Ash <richard@audacityteam.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Richard Ash [Thu, 20 Aug 2009 10:24:39 +0000 (11:24 +0100)]
Staging: quatech_usb2: vendor implementation of set_termios method
This patch imports the implementation of the set_termios method from the
vendor driver into the staging driver. The common terminal setting
changes should be supported.
Signed-off-by: Richard Ash <richard@audacityteam.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Richard Ash [Mon, 17 Aug 2009 09:43:49 +0000 (10:43 +0100)]
Staging: quatech_usb2: chars_in_buffer() fix
It seems I can't count.
Patch to fix chars_in_buffer() method (broken in vendor driver), and
subsequently simplify the close() method, making it somewhat less
broken. There is quite a bit more improvement to do on this method
though.
Signed-off-by: Richard Ash <richard@audacityteam.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Richard Ash [Mon, 17 Aug 2009 09:35:18 +0000 (10:35 +0100)]
Staging: quatech_usb2: write_room rewrite
The following patch re-writes the write_room method to work in the
obvious sort of way, so it keeps it's promises to the layers above.
Based on feedback from Alan Cox.
Signed-off-by: Richard Ash <richard@audacityteam.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Richard Ash [Mon, 17 Aug 2009 09:32:53 +0000 (10:32 +0100)]
Staging: quatech_usb2: close, read, and some ioctl support
This patch implements close(), read(), write() and some ioctls, and
fixes some implementation issues in open(). Compared to the previous
patch it doesn't suffer an oops in the module code, however if you try
to open any of the serial devices a second time then an oops occurs in
tty_open(), presumably because my code isn't playing nicely on the
previous close():
Aug 13 11:44:01 [kernel] WARNING: at drivers/char/tty_io.c:1268 tty_open+0x3e5/0x46d()
Aug 13 11:44:01 [kernel] Hardware name: HP Compaq dc5100 MT(PW097ET)
Aug 13 11:44:01 [kernel] Modules linked in: quatech_usb2(C) usbserial snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss nls_iso8859_1 cifs xt_limit xt_NFLOG nfnetlink_log nfnetlink xt_tcpudp nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack iptable_filter ip_tables x_tables i915 fb drm i2c_algo_bit cfbcopyarea i2c_core video backlight output cfbimgblt cfbfillrect snd_intel8x0 snd_ac97_codec ehci_hcd ac97_bus uhci_hcd snd_pcm snd_timer usbcore snd ohci1394 psmouse ide_cd_mod cdrom tg3 soundcore snd_page_alloc ieee1394 libphy intel_agp agpgart floppy evdev [last unloaded: usbserial]
Aug 13 11:44:01 [kernel] Pid: 26765, comm: stty Tainted: G C 2.6.31-rc5-git3-gkh #7
Aug 13 11:44:01 [kernel] Call Trace:
Aug 13 11:44:01 [kernel] [<c11dbef8>] ? tty_open+0x3e5/0x46d
Aug 13 11:44:01 [kernel] [<c10264e2>] warn_slowpath_common+0x88/0xb0
Aug 13 11:44:01 [kernel] [<c11dbef8>] ? tty_open+0x3e5/0x46d
Aug 13 11:44:01 [kernel] [<c102652b>] warn_slowpath_null+0x21/0x3b
Aug 13 11:44:01 [kernel] [<c11dbef8>] tty_open+0x3e5/0x46d
Aug 13 11:44:01 [kernel] [<c10883d1>] chrdev_open+0x77/0x113
Aug 13 11:44:01 [kernel] [<c1083a5d>] __dentry_open+0xb8/0x230
Aug 13 11:44:01 [kernel] [<c108835a>] ? chrdev_open+0x0/0x113
Aug 13 11:44:01 [kernel] [<c1084993>] nameidata_to_filp+0x61/0x6a
Aug 13 11:44:01 [kernel] [<c1091144>] do_filp_open+0x248/0x7cd
Aug 13 11:44:01 [kernel] [<c106f14f>] ? __do_fault+0x2ba/0x3b2
Aug 13 11:44:01 [kernel] [<c109a337>] ? alloc_fd+0x6a/0xf1
Aug 13 11:44:01 [kernel] [<c1083804>] do_sys_open+0x5f/0x12b
Aug 13 11:44:01 [kernel] [<c1083947>] sys_open+0x2e/0x47
Aug 13 11:44:01 [kernel] [<c1002e4f>] sysenter_do_call+0x12/0x26
Aug 13 11:44:01 [kernel] ---[ end trace 1d6b9e2cd7636394 ]---
Aug 13 11:44:01 [kernel] BUG: unable to handle kernel NULL pointer dereference at 00000004
Aug 13 11:44:01 [kernel] IP: [<c1086538>] file_move+0x26/0x47
Aug 13 11:44:01 [kernel] *pde = 00000000
Aug 13 11:44:01 [kernel] Modules linked in: quatech_usb2(C) usbserial snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss nls_iso8859_1 cifs xt_limit xt_NFLOG nfnetlink_log nfnetlink xt_tcpudp nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack iptable_filter ip_tables x_tables i915 fb drm i2c_algo_bit cfbcopyarea i2c_core video backlight output cfbimgblt cfbfillrect snd_intel8x0 snd_ac97_codec ehci_hcd ac97_bus uhci_hcd snd_pcm snd_timer usbcore snd ohci1394 psmouse ide_cd_mod cdrom tg3 soundcore snd_page_alloc ieee1394 libphy intel_agp agpgart floppy evdev [last unloaded: usbserial]
Aug 13 11:44:01 [kernel] Pid: 26765, comm: stty Tainted: G WC (2.6.31-rc5-git3-gkh #7) HP Compaq dc5100 MT(PW097ET)
Aug 13 11:44:01 [kernel] EIP: 0060:[<c1086538>] EFLAGS: 00010282 CPU: 0
Aug 13 11:44:01 [kernel] EIP is at file_move+0x26/0x47
Aug 13 11:44:01 [kernel] EAX: 00000000 EBX: e593b508 ECX: ea7e9900 EDX: f734a888
Aug 13 11:44:01 [kernel] ESI: 00000000 EDI: 0bc00004 EBP: d8923e10 ESP: d8923e08
Aug 13 11:44:01 [kernel] DS: 007b ES: 007b FS: 0000 GS: 00e0 SS: 0068
Aug 13 11:44:01 [kernel] 2ba6efc8c8c93180d8923e48c11dbca7ea7e9900eed37e6c0000000000008800
Aug 13 11:44:01 [kernel] <0> 00000000e593b400e593b400000000042ba6efc8c8c9318800000000eed37e6c
Aug 13 11:44:01 [kernel] <0> d8923e68c10883d1ea7e99002ba6efc82ba6efc8ea7e9900eed37e6cffffffe9
Aug 13 11:44:01 [kernel] [<c11dbca7>] ? tty_open+0x194/0x46d
Aug 13 11:44:01 [kernel] [<c10883d1>] ? chrdev_open+0x77/0x113
Aug 13 11:44:01 [kernel] [<c1083a5d>] ? __dentry_open+0xb8/0x230
Aug 13 11:44:01 [kernel] [<c108835a>] ? chrdev_open+0x0/0x113
Aug 13 11:44:01 [kernel] [<c1084993>] ? nameidata_to_filp+0x61/0x6a
Aug 13 11:44:01 [kernel] [<c1091144>] ? do_filp_open+0x248/0x7cd
Aug 13 11:44:01 [kernel] [<c106f14f>] ? __do_fault+0x2ba/0x3b2
Aug 13 11:44:01 [kernel] [<c109a337>] ? alloc_fd+0x6a/0xf1
Aug 13 11:44:01 [kernel] [<c1083804>] ? do_sys_open+0x5f/0x12b
Aug 13 11:44:01 [kernel] [<c1083947>] ? sys_open+0x2e/0x47
Aug 13 11:44:01 [kernel] [<c1002e4f>] ? sysenter_do_call+0x12/0x26
Aug 13 11:44:01 [kernel] ---[ end trace 1d6b9e2cd7636395 ]---
Read and Write also do not work at the moment, and I'm fairly sure that
the URB completion callbacks are not running. Why this is I don't know,
and haven't tried to investigate.
Signed-off-by: Richard Ash <richard@audacityteam.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Richard Ash [Wed, 29 Jul 2009 16:12:18 +0000 (17:12 +0100)]
Staging: quatech_usb2: implement open functionality
Part two of the driver implementation has finally got done. It
implements the rest of open and the callback for reads from the box. I
seem to have finally found a structure that can be made to work, with a
single set of URBs for bulk read and write for the whole device, which
are used by all the ports. I've rationalised a few things, but there
will still be a lot of clean-up needed.
This one definitely can panic the kernel when a port is opened for
reading, but I'm off on holiday so I thought I'd post where I have got
to so far. I haven't tried to debug why it panics with a null pointer
dereference yet.
Signed-off-by: Richard Ash <richard@audacityteam.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Richard Ash [Tue, 23 Jun 2009 16:28:06 +0000 (17:28 +0100)]
Staging: add Support for Quatech ESU2-100 USB 2.0 8-port serial adaptor
The patch is of the "works as far as it goes" variety, in that the
module compiles and loads, the device nodes are registered and the unit
switched on, but nothing actually works. On the other hand, it doesn't
panic the kernel, as far as I know.
Signed-off-by: Richard Ash <richard@audacityteam.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Karl Relton [Wed, 19 Aug 2009 07:06:39 +0000 (08:06 +0100)]
Staging: wlan-ng: Convert firmware loading to load binary ihex format
Convert prism2_usb firmware loading to load firmware in pre-compiled
binary 'ihex' format rather than ascii 'srec' format. This moves the
srec processing and sorting of records out of kernel space into a
pre-compiler. The driver now just works with the binary image, but
still does the 'pda plugging' of that image at runtime, as required
by the prism hardware.
Some Notes:
- The firmware is now expected to be in the same 'ihex' (.fw) format
used by other drivers.
- The now driver assumes the data records are already sorted into ascending
address order.
- Plug and crc records are still recognised by special address locations
as in original srec processing.
- The srec S7 start address record is assumed to have been converted
into a data record with another special address location (0xff400000),
with the original start address being stored as a 4 byte data word
(little endian).
Signed-off-by: Karl Relton <karllinuxtest.relton@ntlworld.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Staging: Comedi: Lindent changes to comdi driver in staging tree
Lindent changes to comdi driver in staging tree.
This patch is followed by the checkpatch.pl error fixes.
Did not make them part of this patch as the patch size is already huge.
Staging: vt6655: fix build when !CONFIG_WIRELESS_EXT
Fix this build error when CONFIG_WIRELESS_EXT is not set:
drivers/staging/vt6655/device_main.c:1153: error: 'struct net_device'
has no member named 'wireless_handlers'
Cc: Forest Bond <forest@alittletooquiet.net> Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Forest Bond [Sat, 13 Jun 2009 11:38:40 +0000 (07:38 -0400)]
Staging: vt6656: Add includes to drivers/staging/vt6656.
Add includes to drivers/staging/vt6656. These came from the includes directory
in the upstream source archive. Trailing whitespace was stripped. This is
GPL-licensed code.
Signed-off-by: Forest Bond <forest@alittletooquiet.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Forest Bond [Sat, 13 Jun 2009 11:38:31 +0000 (07:38 -0400)]
Staging: Add pristine upstream vt6656 driver sources to drivers/staging/vt6656.
Add pristine upstream vt6656 driver sources to drivers/staging/vt6656. These
files were copied from the driver directory in the upstream source archive,
available here:
This is the vendor driver for the Ralink RT3090 chipset.
It should be later cleaned and ported to use the existing rt2x00
infrastructure or just replaced by the proper version.
[ Unfortunately since it follows the same design/implementation like
rt{286,287,307}0 drivers (already present in the staging tree)
it is highly unlikely that it will see much love from the wireless
development community.. ]
However since the development of the cleaner/proper version can take
significant time lets give distros (i.e. openSUSE seems to already
have the package with the original vendor driver) and users "something"
to use in the meantime.
I forward ported it to 2.6.31-rc1, ported to the Linux build system
and did some initial cleanups. More fixes/cleanups to come later
(it seems that the driver can be made to share most of its code with
the other Ralink drivers already present in the staging tree).
scripts/checkpatch.pl error fixes. This is a TODO item.
This patch fixes most of the errors reported by checkpatch.pl in
wlan-ng directory of staging tree.
Move module_params to near the end of the source file so that
their references are already known/defined. Fixes build errors:
drivers/staging/android/lowmemorykiller.c: In function '__check_cost':
drivers/staging/android/lowmemorykiller.c:60: error: 'lowmem_shrinker' undeclared (first use in this function)
drivers/staging/android/lowmemorykiller.c: At top level:
drivers/staging/android/lowmemorykiller.c:60: error: 'lowmem_shrinker' undeclared here (not in a function)
drivers/staging/android/lowmemorykiller.c:60: warning: type defaults to 'int' in declaration of 'type name'
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Daniel Walker [Fri, 12 Jun 2009 18:51:16 +0000 (11:51 -0700)]
staging: android: binder: add enum usage in function arguments
Declare the binder_deferred_state enum, and use the new enum
for one of the binder_defer_work function arguments. This
should keep the argument within the confines of the enum
instead of the whole int range.
Signed-off-by: Daniel Walker <dwalker@fifo99.com> Cc: Brian Swetland <swetland@google.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-next-2.6:
ide: fixup for fujitsu disk
ide: convert to ->proc_fops
at91_ide: remove headers specific for at91sam9263
IDE: palm_bk3710: convert clock usage after clkdev conversion
ide: fix races in handling of user-space SET XFER commands
ide: allow ide_dev_read_id() to be called from the IRQ context
ide: ide-taskfile.c fix style problems
drivers/ide/ide-cd.c: Use DIV_ROUND_CLOSEST
ide-tape: fix handling of postponed rqs
ide-tape: convert to ide_debug_log macro
ide-tape: fix debug call
ide: Fix annoying warning in ide_pio_bytes().
IDE: Save a call to PageHighMem()
Merge branch 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc
* 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (134 commits)
powerpc/nvram: Enable use Generic NVRAM driver for different size chips
powerpc/iseries: Fix oops reading from /proc/iSeries/mf/*/cmdline
powerpc/ps3: Workaround for flash memory I/O error
powerpc/booke: Don't set DABR on 64-bit BookE, use DAC1 instead
powerpc/perf_counters: Reduce stack usage of power_check_constraints
powerpc: Fix bug where perf_counters breaks oprofile
powerpc/85xx: Fix SMP compile error and allow NULL for smp_ops
powerpc/irq: Improve nanodoc
powerpc: Fix some late PowerMac G5 with PCIe ATI graphics
powerpc/fsl-booke: Use HW PTE format if CONFIG_PTE_64BIT
powerpc/book3e: Add missing page sizes
powerpc/pseries: Fix to handle slb resize across migration
powerpc/powermac: Thermal control turns system off too eagerly
powerpc/pci: Merge ppc32 and ppc64 versions of phb_scan()
powerpc/405ex: support cuImage via included dtb
powerpc/405ex: provide necessary fixup function to support cuImage
powerpc/40x: Add support for the ESTeem 195E (PPC405EP) SBC
powerpc/44x: Add Eiger AMCC (AppliedMicro) PPC460SX evaluation board support.
powerpc/44x: Update Arches defconfig
powerpc/44x: Update Arches dts
...
Fix up conflicts in drivers/char/agp/uninorth-agp.c
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (46 commits)
powerpc64: convert to dynamic percpu allocator
sparc64: use embedding percpu first chunk allocator
percpu: kill lpage first chunk allocator
x86,percpu: use embedding for 64bit NUMA and page for 32bit NUMA
percpu: update embedding first chunk allocator to handle sparse units
percpu: use group information to allocate vmap areas sparsely
vmalloc: implement pcpu_get_vm_areas()
vmalloc: separate out insert_vmalloc_vm()
percpu: add chunk->base_addr
percpu: add pcpu_unit_offsets[]
percpu: introduce pcpu_alloc_info and pcpu_group_info
percpu: move pcpu_lpage_build_unit_map() and pcpul_lpage_dump_cfg() upward
percpu: add @align to pcpu_fc_alloc_fn_t
percpu: make @dyn_size mandatory for pcpu_setup_first_chunk()
percpu: drop @static_size from first chunk allocators
percpu: generalize first chunk allocator selection
percpu: build first chunk allocators selectively
percpu: rename 4k first chunk allocator to page
percpu: improve boot messages
percpu: fix pcpu_reclaim() locking
...
Fix trivial conflict as by Tejun Heo in kernel/sched.c
Merge branch 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'perfcounters-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf_counter: Fix buffer overflow in perf_copy_attr()
Merge branch 'x86-pat-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip
* 'x86-pat-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
x86, pat: Fix cacheflush address in change_page_attr_set_clr()
mm: remove !NUMA condition from PAGEFLAGS_EXTENDED condition set
x86: Fix earlyprintk=dbgp for machines without NX
x86, pat: Sanity check remap_pfn_range for RAM region
x86, pat: Lookup the protection from memtype list on vm_insert_pfn()
x86, pat: Add lookup_memtype to get the current memtype of a paddr
x86, pat: Use page flags to track memtypes of RAM pages
x86, pat: Generalize the use of page flag PG_uncached
x86, pat: Add rbtree to do quick lookup in memtype tracking
x86, pat: Add PAT reserve free to io_mapping* APIs
x86, pat: New i/f for driver to request memtype for IO regions
x86, pat: ioremap to follow same PAT restrictions as other PAT users
x86, pat: Keep identity maps consistent with mmaps even when pat_disabled
x86, mtrr: make mtrr_aps_delayed_init static bool
x86, pat/mtrr: Rendezvous all the cpus for MTRR/PAT init
generic-ipi: Allow cpus not yet online to call smp_call_function with irqs disabled
x86: Fix an incorrect argument of reserve_bootmem()
x86: Fix system crash when loading with "reservetop" parameter
projects / linux-beck.git / log