David Woodhouse [Fri, 29 Sep 2006 22:50:25 +0000 (15:50 -0700)]
[PATCH] MLSXFRM: fix mis-labelling of child sockets
Accepted connections of types other than AF_INET, AF_INET6, AF_UNIX won't
have an appropriate label derived from the peer, so don't use it.
Signed-off-by: David Woodhouse <dwmw2@infradead.org> Acked-by: Stephen Smalley <sds@tycho.nsa.gov> Acked-by: James Morris <jmorris@namei.org> Acked-by: Paul Moore <paul.moore@hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Merge branch 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband
* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband: (33 commits)
IB/ipath: Fix lockdep error upon "ifconfig ibN down"
IB/ipath: Fix races with ib_resize_cq()
IB/ipath: Support new PCIE device, QLE7142
IB/ipath: Set CPU affinity early
IB/ipath: Fix EEPROM read when driver is compiled with -Os
IB/ipath: Fix and recover TXE piobuf and PBC parity errors
IB/ipath: Change HT CRC message to indicate how to resolve problem
IB/ipath: Clean up module exit code
IB/ipath: Call mtrr_del with correct arguments
IB/ipath: Flush RWQEs if access error or invalid error seen
IB/ipath: Improved support for PowerPC
IB/ipath: Drop unnecessary "(void *)" casts
IB/ipath: Support multiple simultaneous devices of different types
IB/ipath: Fix mismatch in shifts and masks for printing debug info
IB/ipath: Fix compiler warnings and errors on non-x86_64 systems
IB/ipath: Print more informative parity error messages
IB/ipath: Ensure that PD of MR matches PD of QP checking the Rkey
IB/ipath: RC and UC should validate SLID and DLID
IB/ipath: Only allow complete writes to flash
IB/ipath: Count SRQs properly
...
* git://oss.sgi.com:8090/xfs/xfs-2.6: (49 commits)
[XFS] Remove v1 dir trace macro - missed in a past commit.
[XFS] 955947: Infinite loop in xfs_bulkstat() on formatter() error
[XFS] pv 956241, author: nathans, rv: vapo - make ino validation checks
[XFS] pv 956240, author: nathans, rv: vapo - Minor fixes in
[XFS] Really fix use after free in xfs_iunpin.
[XFS] Collapse sv_init and init_sv into just the one interface.
[XFS] standardize on one sema init macro
[XFS] Reduce endian flipping in alloc_btree, same as was done for
[XFS] Minor cleanup from dio locking fix, remove an extra conditional.
[XFS] Fix kmem_zalloc_greedy warnings on 64 bit platforms.
[XFS] pv 955157, rv bnaujok - break the loop on EFAULT formatter() error
[XFS] pv 955157, rv bnaujok - break the loop on formatter() error
[XFS] Fixes the leak in reservation space because we weren't ungranting
[XFS] Add lock annotations to xfs_trans_update_ail and
[XFS] Fix a porting botch on the realtime subvol growfs code path.
[XFS] Minor code rearranging and cleanup to prevent some coverity false
[XFS] Remove a no-longer-correct debug assert from dio completion
[XFS] Add a greedy allocation interface, allocating within a min/max size
[XFS] Improve error handling for the zero-fsblock extent detection code.
[XFS] Be more defensive with page flags (error/private) for metadata
...
drivers/built-in.o: In function `i2c_sibyte_exit':
i2c-sibyte.c:(.exit.text+0x368): undefined reference to `i2c_del_bus'
i2c-sibyte.c:(.exit.text+0x368): relocation truncated to fit: R_MIPS_26 against `i2c_del_bus'
i2c-sibyte.c:(.exit.text+0x38c): undefined reference to `i2c_del_bus'
i2c-sibyte.c:(.exit.text+0x38c): relocation truncated to fit: R_MIPS_26 against `i2c_del_bus'
Paul Jackson [Fri, 29 Sep 2006 09:01:48 +0000 (02:01 -0700)]
[PATCH] cpuset: fix obscure attach_task vs exiting race
Fix obscure race condition in kernel/cpuset.c attach_task() code.
There is basically zero chance of anyone accidentally being harmed by this
race.
It requires a special 'micro-stress' load and a special timing loop hacks
in the kernel to hit in less than an hour, and even then you'd have to hit
it hundreds or thousands of times, followed by some unusual and senseless
cpuset configuration requests, including removing the top cpuset, to cause
any visibly harm affects.
One could, with perhaps a few days or weeks of such effort, get the
reference count on the top cpuset below zero, and manage to crash the
kernel by asking to remove the top cpuset.
I found it by code inspection.
The race was introduced when 'the_top_cpuset_hack' was introduced, and one
piece of code was not updated. An old check for a possibly null task
cpuset pointer needed to be changed to a check for a task marked
PF_EXITING. The pointer can't be null anymore, thanks to
the_top_cpuset_hack (documented in kernel/cpuset.c). But the task could
have gone into PF_EXITING state after it was found in the task_list scan.
If a task is PF_EXITING in this code, it is possible that its task->cpuset
pointer is pointing to the top cpuset due to the_top_cpuset_hack, rather
than because the top_cpuset was that tasks last valid cpuset. In that
case, the wrong cpuset reference counter would be decremented.
The fix is trivial. Instead of failing the system call if the tasks cpuset
pointer is null here, fail it if the task is in PF_EXITING state.
The code for 'the_top_cpuset_hack' that changes an exiting tasks cpuset to
the top_cpuset is done without locking, so could happen at anytime. But it
is done during the exit handling, after the PF_EXITING flag is set. So if
we verify that a task is still not PF_EXITING after we copy out its cpuset
pointer (into 'oldcs', below), we know that 'oldcs' is not one of these
hack references to the top_cpuset.
Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
With CONFIG_DEBUG_LOCK_ALLOC turned off i was getting sporadic failures in
the locking self-test:
------------>
| Locking API testsuite:
----------------------------------------------------------------------------
| spin |wlock |rlock |mutex | wsem | rsem |
--------------------------------------------------------------------------
A-A deadlock: ok | ok | ok | ok | ok | ok |
A-B-B-A deadlock: ok | ok | ok | ok | ok | ok |
A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok |
A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok |
A-B-B-C-C-D-D-A deadlock: ok |FAILED| ok | ok | ok | ok |
A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok |
A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok |FAILED|
after much debugging it turned out to be caused by accidental chain-hash
key collisions. The current hash is:
where MAX_LOCKDEP_KEYS_BITS is 11. This hash is pretty good as it will
shift by 5 bits in every iteration, where every new ID 'mixed' into the
hash would have up to 11 bits. But because there was a 6 bits overlap
between subsequent IDs and their high bits tended to be similar, there was
a chance for accidental chain-hash collision for a low number of locks
held.
This keeps the hash perfect up to 5 locks held, but even above that the
hash is still good because 11 bits is a relative prime to the total 64
bits, so a complete match will only occur after 64 held locks (which doesnt
happen in Linux). Even after 5 locks held, entropy of the 5 IDs mixed into
the hash is already good enough so that overlap doesnt generate a colliding
hash ID.
o As per ELF specifications, it looks like that elf note "namesz" field
contains the length of "name" including the size of null character. And
currently we are filling "namesz" without taking into the consideration
the null character size.
o Kexec-tools performs this check deligently hence I ran into the issue
while trying to open /proc/kcore in kexec-tools for some info.
Signed-off-by: Vivek Goyal <vgoyal@in.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] Clean up expand_fdtable() and expand_files()
Perform a code cleanup against the expand_fdtable() and expand_files()
functions inside fs/file.c. It aims to make the flow of code within these
functions simpler and easier to understand, via added comments and modest
refactoring.
[PATCH] Documentation/SubmittingDrivers: minor update
* fix copright typo
* remove trailing whitespace
* remove Kernel Traffic from Resources. Zack, it was great reading!
* Name Arjan by name and fix URL of "How to NOT" paper.
* Remove "Last updated" tag.
Alan Cox [Fri, 29 Sep 2006 09:01:41 +0000 (02:01 -0700)]
[PATCH] audit/accounting: tty locking
Add tty locking around the audit and accounting code.
The whole current->signal-> locking is all deeply strange but it's for
someone else to sort out. Add rather than replace the lock for acct.c
Signed-off-by: Alan Cox <alan@redhat.com> Acked-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Oleg Nesterov <oleg@tv-sign.ru> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Alan Cox [Fri, 29 Sep 2006 09:01:40 +0000 (02:01 -0700)]
[PATCH] Fix locking for tty drivers when doing urgent characters
If you send a priority character (as is done for flow control) then the tty
driver can either have its own method for "jumping the queue" or the characrer
can be queued normally. In the latter case we call the write method but
without the atomic_write_lock taken elsewhere.
Make this consistent. Note that the send_xchar method if implemented remains
outside of the lock as it can jump ahead of a current write so must not be
locked out by it.
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Alan Cox [Fri, 29 Sep 2006 09:01:38 +0000 (02:01 -0700)]
[PATCH] generic_serial: remove private decoding of baud rate bits
The driver has no business doing this work itself any more and hasn't for some
years. When the new speed stuff goes in this will break entirely so fix it up
ready.
Also remove a #if 0 around a comment....
Signed-off-by: Alan Cox <alan@redhat.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] RTC: more XSTP/VDET support for rtc-rs5c348 driver
If the chip detected "oscillator stop" condition, show an warning message.
And initialize it with the Epoch time instead of leaving it with unknown
date/time.
Adrian Bunk [Fri, 29 Sep 2006 09:01:36 +0000 (02:01 -0700)]
[PATCH] build sound/sound_firmware.c only for OSS
All sound/sound_firmware.c contains is mod_firmware_load() that is a legacy
API only used by some OSS drivers.
This patch builds it into an own sound_firmware module that is only built
depending on CONFIG_SOUND_PRIME making the kernel slightly smaller for ALSA
users.
[alan@lxorguk.ukuu.org.uk: comment fix] Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Takashi Iwai <tiwai@suse.de> Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The patches solve the following problem: We want to grant access to devices
based on who is logged in from where, etc. This includes switching back and
forth between multiple user sessions, etc.
Using ACLs to define device access for logged-in users gives us all the
flexibility we need in order to fully solve the problem.
Device special files nowadays usually live on tmpfs, hence tmpfs ACLs.
Different distros have come up with solutions that solve the problem to
different degrees: SUSE uses a resource manager which tracks login sessions
and sets ACLs on device inodes as appropriate. RedHat uses pam_console, which
changes the primary file ownership to the logged-in user. Others use a set of
groups that users must be in in order to be granted the appropriate accesses.
The freedesktop.org project plans to implement a combination of a
console-tracker and a HAL-device-list based solution to grant access to
devices to users, and more distros will likely follow this approach.
These patches have first been posted here on 2 February 2005, and again
on 8 January 2006. We have been shipping them in SLES9 and SLES10 with
no problems reported. The previous submission is archived here:
Chris Snook [Fri, 29 Sep 2006 09:01:33 +0000 (02:01 -0700)]
[PATCH] enforce RLIMIT_NOFILE in poll()
POSIX states that poll() shall fail with EINVAL if nfds > OPEN_MAX. In
this context, POSIX is referring to sysconf(OPEN_MAX), which is the value
of current->signal->rlim[RLIMIT_NOFILE].rlim_cur in the linux kernel, not
the compile-time constant which happens to also be named OPEN_MAX. In the
current code, an application may poll up to max_fdset file descriptors,
even if this exceeds RLIMIT_NOFILE. The current code also breaks
applications which poll more than max_fdset descriptors, which worked circa
2.4.18 when the check was against NR_OPEN, which is 1024*1024. This patch
enforces the limit precisely as POSIX defines, even if RLIMIT_NOFILE has
been changed at run time with ulimit -n.
To elaborate on the rationale for this, there are three cases:
1) RLIMIT_NOFILE is at the default value of 1024
In this (default) case, the patch changes nothing. Calls with nfds > 1024
fail with EINVAL both before and after the patch, and calls with nfds <=
1024 pass the check both before and after the patch, since 1024 is the
initial value of max_fdset.
2) RLIMIT_NOFILE has been raised above the default
In this case, poll() becomes more permissive, allowing polling up to
RLIMIT_NOFILE file descriptors even if less than 1024 have been opened.
The patch won't introduce new errors here. If an application somehow
depends on poll() failing when it polls with duplicate or invalid file
descriptors, it's already broken, since this is already allowed below 1024,
and will also work above 1024 if enough file descriptors have been open at
some point to cause max_fdset to have been increased above nfds.
3) RLIMIT_NOFILE has been lowered below the default
In this case, the system administrator or the user has gone out of their
way to protect the system from inefficient (or malicious) applications
wasting kernel memory. The current code allows polling up to 1024 file
descriptors even if RLIMIT_NOFILE is much lower, which is not what the user
or administrator intended. Well-written applications which only poll
valid, unique file descriptors will never notice the difference, because
they'll hit the limit on open() first. If an application gets broken
because of the patch in this case, then it was already poorly/maliciously
designed, and allowing it to work in the past was a violation of POSIX and
a DoS risk on low-resource systems.
With this patch, poll() will permit exactly what POSIX suggests, no more,
no less, and for any run-time value set with ulimit -n, not just 256 or
1024. There are existing apps which which poll a large number of file
descriptors, some of which may be invalid, and if those numbers stradle
1024, they currently fail with or without the patch in -mm, though they
worked fine under 2.4.18.
Signed-off-by: Chris Snook <csnook@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Ian S. Nelson [Fri, 29 Sep 2006 09:01:31 +0000 (02:01 -0700)]
[PATCH] /sys/modules: allow full length section names
I've been using systemtap for some debugging and I noticed that it can't
probe a lot of modules. Turns out it's kind of silly, the sections section
of /sys/module is limited to 32byte filenames and many of the actual
sections are a a bit longer than that.
[akpm@osdl.org: rewrite to use dymanic allocation] Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
akpm draws my attention to the fact that sysctl(VM_PAGE_CLUSTER) might
conceivably change page_cluster to 0 while valid_swaphandles() is in the
middle of using it, leading to an embarrassingly long loop: take a local
snapshot of page_cluster and work with that.
[PATCH] call mm/page-writeback.c:set_ratelimit() when new pages are hot-added
ratelimit_pages in page-writeback.c is recalculated (in set_ratelimit())
every time a CPU is hot-added/removed. But this value is not recalculated
when new pages are hot-added.
This patch fixes that problem by calling set_ratelimit() when new pages
are hot-added.
page-writeback.c has a static local variable "total_pages", which is the
total number of pages in the system.
There is a global variable "vm_total_pages", which is the total number of
pages the VM controls.
Both are assigned from the return value of nr_free_pagecache_pages().
This patch removes the local variable and uses the global variable in that
place.
One more issue with the local static variable "total_pages" is that it is
not updated when new pages are hot-added. Since vm_total_pages is updated
when new pages are hot-added, this patch fixes that problem too.
Kaz Kojima [Fri, 29 Sep 2006 09:01:22 +0000 (02:01 -0700)]
[PATCH] SuperH maintainership change
I think this is a time to step down from my SUPERH architecture
maintainerships. The major development issues for this port seem to shift
on the hardwares I can't access and I have no recent activity on kernel. I
shouldn't qualify as a maintainer of SUPERH port now and there is no
problem because Paul is actively maintaining it. The attached patch drops
my name, address and web URL from MAINTAINERS file.
Signed-off-by: Kazumoto Kojima <kkojima@rr.iij4u.or.jp> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Andreas Mohr [Fri, 29 Sep 2006 09:01:22 +0000 (02:01 -0700)]
[PATCH] fs/namei.c: replace multiple current->fs by shortcut variable
Replace current->fs by fs helper variable to reduce some indirection
overhead and (at least at the moment, before the current_thread_info() %gs
PDA improvement is available) get rid of more costly current references.
Reduces fs/namei.o from 37786 to 37082 Bytes (704 Bytes saved).
[akpm@osdl.org: cleanup] Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Alan Stern [Fri, 29 Sep 2006 09:01:21 +0000 (02:01 -0700)]
[PATCH] Add section on function return values to CodingStyle
This patch (as776) adds a new chapter to Documentation/CodingStyle,
explaining the circumstances under which a function should return 0 for
failure and non-zero for success as opposed to a negative error code for
failure and 0 for success.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Jim Lewis [Fri, 29 Sep 2006 09:01:19 +0000 (02:01 -0700)]
[PATCH] Add to MAINTAINERS file
This patch adds Jim Lewis to the MAINTAINERS file for the Spidernet
network driver.
Signed-off-by: James K Lewis <jklewis@us.ibm.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] loop: forward-port resource leak checks from Solar
Forward port of the patch by Solar and ported by Julio.
Compiles, boots, and passes my looptorturetest.sh.
Signed-off-by: Serge E. Hallyn <serue@us.ibm.com> Cc: Julio Auto <mindvortex@gmail.com> Cc: Solar Designer <solar@openwall.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Paul Jackson [Fri, 29 Sep 2006 09:01:17 +0000 (02:01 -0700)]
[PATCH] cpuset: hotunplug cpus and mems in all cpusets
The cpuset code handling hot unplug of CPUs or Memory Nodes was incorrect -
it could remove a CPU or Node from the top cpuset, while leaving it still
in some child cpusets.
One basic rule of cpusets is that each cpusets cpus and mems are subsets of
its parents. The cpuset hot unplug code violated this rule.
So the cpuset hotunplug handler must walk down the tree, removing any
removed CPU or Node from all cpusets.
However, it is not allowed to make a cpusets cpus or mems become empty.
They can only transition from empty to non-empty, not back.
So if the last CPU or Node would be removed from a cpuset by the above
walk, we scan back up the cpuset hierarchy, finding the nearest ancestor
that still has something online, and copy its CPU or Memory placement.
Signed-off-by: Paul Jackson <pj@sgi.com> Cc: Nathan Lynch <ntl@pobox.com> Cc: Anton Blanchard <anton@samba.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Paul Jackson [Fri, 29 Sep 2006 09:01:16 +0000 (02:01 -0700)]
[PATCH] cpuset: top_cpuset tracks hotplug changes to node_online_map
Change the list of memory nodes allowed to tasks in the top (root) nodeset
to dynamically track what cpus are online, using a call to a cpuset hook
from the memory hotplug code. Make this top cpus file read-only.
On systems that have cpusets configured in their kernel, but that aren't
actively using cpusets (for some distros, this covers the majority of
systems) all tasks end up in the top cpuset.
If that system does support memory hotplug, then these tasks cannot make
use of memory nodes that are added after system boot, because the memory
nodes are not allowed in the top cpuset. This is a surprising regression
over earlier kernels that didn't have cpusets enabled.
One key motivation for this change is to remain consistent with the
behaviour for the top_cpuset's 'cpus', which is also read-only, and which
automatically tracks the cpu_online_map.
This change also has the minor benefit that it fixes a long standing,
little noticed, minor bug in cpusets. The cpuset performance tweak to
short circuit the cpuset_zone_allowed() check on systems with just a single
cpuset (see 'number_of_cpusets', in linux/cpuset.h) meant that simply
changing the 'mems' of the top_cpuset had no affect, even though the change
(the write system call) appeared to succeed. With the following change,
that write to the 'mems' file fails -EACCES, and the 'mems' file stubbornly
refuses to be changed via user space writes. Thus no one should be mislead
into thinking they've changed the top_cpusets's 'mems' when in affect they
haven't.
In order to keep the behaviour of cpusets consistent between systems
actively making use of them and systems not using them, this patch changes
the behaviour of the 'mems' file in the top (root) cpuset, making it read
only, and making it automatically track the value of node_online_map. Thus
tasks in the top cpuset will have automatic use of hot plugged memory nodes
allowed by their cpuset.
[akpm@osdl.org: build fix]
[bunk@stusta.de: build fix] Signed-off-by: Paul Jackson <pj@sgi.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Nick Piggin [Fri, 29 Sep 2006 09:01:14 +0000 (02:01 -0700)]
[PATCH] oom: don't kill current when another OOM in progress
A previous patch to allow an exiting task to OOM kill itself (and thereby
avoid a little deadlock) introduced a problem. We don't want the
PF_EXITING task, even if it is 'current', to access mem reserves if there
is already a TIF_MEMDIE process in the system sucking up reserves.
Also make the commenting a little bit clearer, and note that our current
scheme of effectively single threading the OOM killer is not itself
perfect.
Signed-off-by: Nick Piggin <npiggin@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] select_bad_process(): kill a bogus PF_DEAD/TASK_DEAD check
The only one usage of TASK_DEAD outside of last schedule path,
select_bad_process:
for_each_task(p) {
if (!p->mm)
continue;
...
if (p->state == TASK_DEAD)
continue;
...
TASK_DEAD state is set at the end of do_exit(), this means that p->mm
was already set == NULL by exit_mm(), so this task was already rejected
by 'if (!p->mm)' above.
Note also that the caller holds tasklist_lock, this means that p can't
pass exit_notify() and then set TASK_DEAD when p->mm != NULL.
Also, remove open-coded is_init().
Signed-off-by: Oleg Nesterov <oleg@tv-sign.ru> Cc: Ingo Molnar <mingo@elte.hu> Cc: Nick Piggin <nickpiggin@yahoo.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
I am not sure about this patch, I am asking Ingo to take a decision.
task_struct->state == EXIT_DEAD is a very special case, to avoid a confusion
it makes sense to introduce a new state, TASK_DEAD, while EXIT_DEAD should
live only in ->exit_state as documented in sched.h.
Note that this state is not visible to user-space, get_task_state() masks off
unsuitable states.
[PATCH] set EXIT_DEAD state in do_exit(), not in schedule()
schedule() checks PF_DEAD on every context switch and sets ->state = EXIT_DEAD
to ensure that the exiting task will be deactivated. Note that this EXIT_DEAD
is in fact a "random" value, we can use any bit except normal TASK_XXX values.
It is better to set this state in do_exit() along with PF_DEAD flag and remove
that check in schedule().
We are safe wrt concurrent try_to_wake_up() (for example ptrace, tkill), it
can not change task's ->state: the 'state' argument of try_to_wake_up() can't
have EXIT_DEAD bit. And in case when try_to_wake_up() sees a stale value of
->state == TASK_RUNNING it will do nothing.
Introduce the disable_irq_nosync_lockdep_irqsave() and
enable_irq_lockdep_irqrestore() APIs. These are needed for NE2000; basically
NE2000 calls disable_irq and enable_irq as locking against the IRQ handler,
but both in cases where interrupts are on and off. This means that lockdep
needs to track the old state of the virtual irq flags on disable_irq, and
restore these at enable_irq time.
Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] cramfs: make cramfs_uncompress_exit() return void
It always returns 0, so relying on it is useless. The only caller isn't
checking return value. In general, un-, de-, -free functions should return
void.
[PATCH] Pass a lock expression to __cond_lock, like __acquire and __release
Currently, __acquire and __release take a lock expression, but __cond_lock
takes only a condition, not the lock acquired if the expression evaluates
to true. Change __cond_lock to accept a lock expression, and change all
the callers to pass in a lock expression.
At the beginning of the routine, "copied" is set to 0, but it is no good
because in lines 805 and 812 it is set to other values. Finally, the
routine returns as if it copied 12 (=ENOMEM) bytes less than it actually
did.
Signed-off-by: Frederik Deweerdt <frederik.deweerdt@gmail.com> Acked-by: Eric Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Jason Baron [Fri, 29 Sep 2006 09:01:01 +0000 (02:01 -0700)]
[PATCH] block_dev.c mutex_lock_nested() fix
In the case below we are locking the whole disk not a partition. This
change simply brings the code in line with the piece above where when we
are the 'first' opener, and we are a partition.
Signed-off-by: Jason Baron <jbaron@redhat.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] Replace _spin_trylock with spin_trylock in the IRQ variants to use __cond_lock
spin_trylock_irq and spin_trylock_irqsave use _spin_trylock, which does not
use the __cond_lock wrapper annotation and thus does not affect the lock
context; change them to use spin_trylock instead, which does use
__cond_lock.
[PATCH] Make spinlock/rwlock annotations more accurate by using parameters, not types
The lock annotations used on spinlocks and rwlocks currently use
__{acquires,releases}(spinlock_t) and __{acquires,releases}(rwlock_t),
respectively. This loses the information of which lock actually got
acquired or released, and assumes a different type for the parameter of
__acquires and __releases than the rest of the kernel. While the current
implementations of __acquires and __releases throw away their argument,
this will not always remain the case. Change this to use the lock
parameter instead, to preserve this information and increase consistency in
usage of __acquires and __releases.
Alan Cox [Fri, 29 Sep 2006 09:00:58 +0000 (02:00 -0700)]
[PATCH] tty: Fix bits and note more bits to fix
If your driver implements "break on" and "break off" this ensures you won't
get multiple overlapping requests or requests in parallel. If your driver
has its own break handling then its still your problem as the driver
author.
Break is also now serialized against writes from user space properly but no
new guarantees are made driver level about writes from the line discipline
itself (eg flow control or echo)
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Alan Cox [Fri, 29 Sep 2006 09:00:57 +0000 (02:00 -0700)]
[PATCH] solaris emulation: incorrect tty locking
[akpm@osdl.org: build fix]
[akpm@osdl.org: warning fix] Signed-off-by: Alan Cox <alan@redhat.com> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Adds a missing exit, if the file that should be parsed couldn't be opened.
Without it crashes with a segfault, cause the filedescriptor is accessed
even if the file could not be opened.
Signed-off-by: Henrik Kretzschmar <henne@nachtwindheim.de> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Ian Kent [Fri, 29 Sep 2006 09:00:54 +0000 (02:00 -0700)]
[PATCH] autofs4: pending flag not cleared on mount fail
During testing I've found that the mount pending flag can be left set at
exit from autofs4_lookup after a failed mount request. This shouldn't be
allowed to happen and causes incorrect error returns.
Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
The check for an empty directory in the autofs4_follow_link method fails
occassionally due to old dentrys. We had the same problem
autofs4_revalidate ages ago. I thought we wouldn't need this in
autofs4_follow_link, silly me.
Signed-off-by: Ian Kent <raven@themaw.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Why? ->ioprio was already copied in dup_task_struct(). I guess this is
needed to ensure that the child can't escape
sys_ioprio_set(IOPRIO_WHO_{PGRP,USER}), yes?
In that case we don't need ->siglock held, and the comment should be
updated.
Cal Peake [Fri, 29 Sep 2006 09:00:47 +0000 (02:00 -0700)]
[PATCH] kill extraneous printk in kernel_restart()
Get rid of an extraneous printk in kernel_restart().
Signed-off-by: Cal Peake <cp@absolutedigital.net> Acked-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Björn Steinbrink [Fri, 29 Sep 2006 09:00:46 +0000 (02:00 -0700)]
[PATCH] Fix ____call_usermodehelper errors being silently ignored
If ____call_usermodehelper fails, we're not interested in the child
process' exit value, but the real error, so let's stop wait_for_helper from
overwriting it in that case.
Issue discovered by Benedikt Böhm while working on a Linux-VServer usermode
helper.
Signed-off-by: Björn Steinbrink <B.Steinbrink@gmx.de> Cc: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] Return better error codes if drivers/char/raw.c module init fails
Currently this module just returns 1 if anything on module init fails. Store
the error code of the different function calls and return their error on
problems.
Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org>
[ Fixed to not unregister twice on error ] Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Roland McGrath [Fri, 29 Sep 2006 09:00:45 +0000 (02:00 -0700)]
[PATCH] Use decimal for PTRACE_ATTACH and PTRACE_DETACH.
It is sure confusing that linux/ptrace.h has:
#define PTRACE_SINGLESTEP 9
#define PTRACE_ATTACH 0x10
#define PTRACE_DETACH 0x11
#define PTRACE_SYSCALL 24
All the low-numbered constants are in decimal, but the last two in hex.
It sure makes it likely that someone will look at this and think that
9, 10, 11 are used, and that 16 and 17 are not used.
How about we use the same notation for all the numbers [0,24] in the
same short list?
Signed-off-by: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Arjan van de Ven [Fri, 29 Sep 2006 09:00:43 +0000 (02:00 -0700)]
[PATCH] tty: make termios_sem a mutex
[akpm@osdl.org: fix] Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Alan Cox [Fri, 29 Sep 2006 09:00:40 +0000 (02:00 -0700)]
[PATCH] tty: lock ticogwinsz
Now we lock the set ioctl its trivial to lock the get one so the data
copied is consistent. At the moment we have the BKL here but this removes
the need for it and is a step in the right direction
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Pass ticks to do_timer() and update_times(), and adjust x86_64 and s390
timer interrupt handler with this change.
Currently update_times() calculates ticks by "jiffies - wall_jiffies", but
callers of do_timer() should know how many ticks to update. Passing ticks
get rid of this redundant calculation. Also there are another redundancy
pointed out by Martin Schwidefsky.
As a bonus, this cleanup make wall_jiffies can be removed easily, since now
wall_jiffies is always synced with jiffies. (This patch does not really
remove wall_jiffies. It would be another cleanup patch)
Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: john stultz <johnstul@us.ibm.com> Cc: Andi Kleen <ak@muc.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Acked-by: Russell King <rmk@arm.linux.org.uk> Cc: Ian Molton <spyro@f2s.com> Cc: Mikael Starvik <starvik@axis.com> Acked-by: David Howells <dhowells@redhat.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Hirokazu Takata <takata.hirokazu@renesas.com> Acked-by: Ralf Baechle <ralf@linux-mips.org> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Kazumoto Kojima <kkojima@rr.iij4u.or.jp> Cc: Richard Curnow <rc@rc0.org.uk> Cc: William Lee Irwin III <wli@holomorphy.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Dike <jdike@addtoit.com> Cc: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Cc: Miles Bader <uclinux-v850@lsi.nec.co.jp> Cc: Chris Zankel <chris@zankel.net> Acked-by: "Luck, Tony" <tony.luck@intel.com> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] I/O Error attempting to read last partial block of a file in an ISO9660 file system
There was an I/O error that prevented reading the last partial block of
large files in an ISO9660 filesystem. The error was generated when a file
comprised more than one section and had a size that was not an exact
multiple of the filesystem block size. This patch removes the check (and
failure) for reading into the last partial block (and possibly beyond) for
multiple-section files.
It worked in my testing to prevent reading beyond the end of the section;
my first patch just incremented the sect_size block count for a partial
block and continued doing the check. But there is a commment in the source
code about reading beyond the end of the file to fill a page cache.
Failing to access beyond the section would prevent reading beyond the end
of the file.
Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] posix-timers: Fix the flags handling in posix_cpu_nsleep()
When a posix_cpu_nsleep() sleep is interrupted by a signal more than twice, it
incorrectly reports the sleep time remaining to the user. Because
posix_cpu_nsleep() doesn't report back to the user when it's called from
restart function due to the wrong flags handling.
This patch, which applies after previous one, moves the nanosleep() function
from posix_cpu_nsleep() to do_cpu_nanosleep() and cleans up the flags handling
appropriately.
Signed-off-by: Toyo Abe <toyoa@mvista.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
[PATCH] posix-timers: Fix clock_nanosleep() doesn't return the remaining time in compatibility mode
The clock_nanosleep() function does not return the time remaining when the
sleep is interrupted by a signal.
This patch creates a new call out, compat_clock_nanosleep_restart(), which
handles returning the remaining time after a sleep is interrupted. This
patch revives clock_nanosleep_restart(). It is now accessed via the new
call out. The compat_clock_nanosleep_restart() is used for compatibility
access.
Since this is implemented in compatibility mode the normal path is
virtually unaffected - no real performance impact.
Signed-off-by: Toyo Abe <toyoa@mvista.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Roland McGrath <roland@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Jan Kara [Fri, 29 Sep 2006 09:00:26 +0000 (02:00 -0700)]
[PATCH] dquot: add proper locking when using current->signal->tty
Dquot passes the tty to tty_write_message without locking
Signed-off-by: Jan Kara <jack@suse.cz> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Memory leaks can happen in the vc_resize() function in drivers/char/vt.c
because of the vc->vc_screenbuf variable overriding in vc_allocate(). The
kmemleak reported trace is as follows:
projects / mv-sheeva.git / log