mm/page_alloc.c: remove duplicate check

While allocating pages using buddy allocator, the compound page is
probably split up to free pages.  Under these circumstances, the compound
page should be destroyed by destroy_compound_page().  However, there is a
duplicate check to judge if the page is compound.

Remove the duplicate check since the compound_order() returns 0 when the
page doesn't have PG_head set in destroy_compound_page().  That is to say,
destroy_compound_page() needn't check PageHead().

Signed-off-by: Gavin Shan <shangw@linux.vnet.ibm.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

fs: push rcu_barrier() from deactivate_locked_super() to filesystems

There's no reason to call rcu_barrier() on every
deactivate_locked_super().  We only need to make sure that all delayed rcu
free inodes are flushed before we destroy related cache.

Removing rcu_barrier() from deactivate_locked_super() affects some fast
paths.  E.g.  on my machine exit_group() of a last process in IPC
namespace takes 0.07538s.  rcu_barrier() takes 0.05188s of that time.

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

vfs: increment iversion when a file is truncated

When a file is truncated with truncate()/ftruncate() and then closed,
iversion is not updated.  This patch uses ATTR_SIZE flag as an indication
to increment iversion.

Mimi said:

On fput(), i_version is used to detect and flag files that have changed
and need to be re-measured in the IMA measurement policy.  When a file
is truncated with truncate()/ftruncate() and then closed, i_version is
not updated.  As a result, although the file has changed, it will not be
re-measured and added to the IMA measurement list on subsequent access.

Signed-off-by: Dmitry Kasatkin <dmitry.kasatkin@intel.com>
Acked-by: Mimi Zohar <zohar@us.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

block: partition: msdos: provide UUIDs for partitions

The MSDOS/MBR partition table includes a 32-bit unique ID, often referred
to as the NT disk signature.  When combined with a partition number within
the table, this can form a unique ID similar in concept to EFI/GPT's
partition UUID.  Constructing and recording this value in struct
partition_meta_info allows MSDOS partitions to be referred to on the
kernel command-line using the following syntax:

root=PARTUUID=0002dd75-01

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Tejun Heo <tj@kernel.org>
Cc: Will Drewry <wad@chromium.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

init: reduce PARTUUID min length to 1 from 36

Reduce the minimum length for a root=PARTUUID= parameter to be considered
valid from 36 to 1.  EFI/GPT partition UUIDs are always exactly 36
characters long, hence the previous limit.  However, the next patch will
support DOS/MBR UUIDs too, which have a different, shorter, format.
Instead of validating any particular length, just ensure that at least
some non-empty value was given by the user.

Also, consider a missing UUID value to be a parsing error, in the same
vein as if /PARTNROFF exists and can't be parsed.  As such, make both
error cases print a message and disable rootwait.  Convert to pr_err while
we're at it.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Tejun Heo <tj@kernel.org>
Cc: Will Drewry <wad@chromium.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

block: store partition_meta_info.uuid as a string

This will allow other types of UUID to be stored here, aside from true
UUIDs.  This also simplifies code that uses this field, since it's usually
constructed from a, used as a, or compared to other, strings.

Note: A simplistic approach here would be to set uuid_str[36]=0 whenever a
/PARTNROFF option was found to be present.  However, this modifies the
input string, and causes subsequent calls to devt_from_partuuid() not to
see the /PARTNROFF option, which causes different results.  In order to
avoid misleading future maintainers, this parameter is marked const.

Signed-off-by: Stephen Warren <swarren@nvidia.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Tejun Heo <tj@kernel.org>
Cc: Will Drewry <wad@chromium.org>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

cciss: use check_signature

Use check_signature() to find a signature in the mmio address.

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Mike Miller <mike.miller@hp.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

cciss: cleanup bitops usage

- Remove unnecessary correction of bit and address
- Use BITS_TO_LONGS macro to calculate bitmap size
- Use bitmap_zero()

Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Cc: Mike Miller <mike.miller@hp.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Stephen M. Cameron <scameron@beardog.cce.hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

drivers/scsi/ipr.c: remove an unneeded check

"rc" is always zero here, so there is no need to check.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Brian King <brking@linux.vnet.ibm.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

drivers/scsi/atp870u.c: fix bad use of udelay

The ACARD driver calls udelay() with a value > 2000, which leads to
to the following compilation error on ARM:
  ERROR: "__bad_udelay" [drivers/scsi/atp870u.ko] undefined!
  make[1]: *** [__modpost] Error 1

This is because udelay is defined on ARM, roughly speaking, as

#define udelay(n) ((n) > 2000 ? __bad_udelay() : \
__const_udelay((n) * ((2199023U*HZ)>>11)))

The argument to __const_udelay is the number of jiffies to wait divided by
4, but this does not work unless the multiplication does not overflow, and
that is what the build error is designed to prevent.  The intended
behavior can be achieved by using mdelay to call udelay multiple times in
a loop.

[jn: adding context]
Signed-off-by: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: Jonathan Nieder <jrnieder@gmail.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

readahead: fault retry breaks mmap file read random detection

.fault now can retry.  The retry can break state machine of .fault.  In
filemap_fault, if page is miss, ra->mmap_miss is increased.  In the second
try, since the page is in page cache now, ra->mmap_miss is decreased.  And
these are done in one fault, so we can't detect random mmap file access.

Add a new flag to indicate .fault is tried once.  In the second try, skip
ra->mmap_miss decreasing.  The filemap_fault state machine is ok with it.

I only tested x86, didn't test other archs, but looks the change for other
archs is obvious, but who knows :)

Signed-off-by: Shaohua Li <shaohua.li@fusionio.com>
Cc: Rik van Riel <riel@redhat.com>
Cc: Wu Fengguang <fengguang.wu@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

unicore32: select generic atomic64_t support

It's required for the core fs/namespace.c and many other basic features.

Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn>
Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

h8300: select generic atomic64_t support

Rationales from Eric:

So I just looked a little deeper and it appears architectures that do
not support atomic64_t are broken.

The generic atomic64 support came in 2009 to support the perf subsystem
with the expectation that all architectures would implement atomic64
support.

Furthermore upon inspection of the kernel atomic64_t is used in a fair
number of places beyond the performance counters:

block/blk-cgroup.c
drivers/acpi/apei/
drivers/block/rbd.c
drivers/crypto/nx/nx.h
drivers/gpu/drm/radeon/radeon.h
drivers/infiniband/hw/ipath/
drivers/infiniband/hw/qib/
drivers/staging/octeon/
fs/xfs/
include/linux/perf_event.h
include/net/netfilter/nf_conntrack_acct.h
kernel/events/
kernel/trace/
net/mac80211/key.h
net/rds/

The block control group, infiniband, xfs, crypto, 802.11, netfilter.
Nothing quite so fundamental as fs/namespace.c but definitely in
multiplatform-code that should work, and is already broken on those
architecutres.

Looking at the implementation of atomic64_add_return in lib/atomic64.c the
code looks as efficient as these kinds of things get.

Which leads me to the conclusion that we need atomic64 support on all
architectures.

Signed-off-by: Fengguang Wu <fengguang.wu@intel.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

time: don't inline EXPORT_SYMBOL functions

How is the compiler even handling exported functions that are marked
inline?  Anyway, these shouldn't be inline because of that, so remove that
marking.

Based on a larger patch by Mark Charlebois to get LLVM to build the
kernel.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Mark Charlebois <mcharleb@qualcomm.com>
Cc: Paul Gortmaker <paul.gortmaker@windriver.com>
Cc: hank <pyu@redhat.com>
Cc: John Stultz <john.stultz@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

timeconst.pl: remove deprecated defined(@array)

The use of defined() on arrays and hashes has been deprecated since perl
5.6, but until 5.17.6 it only warned on lexicals, not package globals.

Signed-off-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Acked-by: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

drm/i915: optimize DIV_ROUND_CLOSEST() call

DIV_ROUND_CLOSEST is faster if the compiler knows it will only be dealing
with unsigned dividends.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: David Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

pcmcia: move unbind/rebind into dev_pm_ops.complete

Move the device rebind procedures for cardbus devices from the pm.resume
into the pm.complete callback.

The reason for moving the code is: "[...] The PM code needs to send
suspend and resume messages to every device in the right order, and it
can't do that if new devices are being added at the same time.  [...]"

However the situation really isn't quite that rigid.  In particular,
adding new children during a resume callback shouldn't cause much of
problem because the children don't need to be resumed anyway (since they
were never suspended).  On the other hand, if you do it you will get a
dev_warn() from the PM core, something like 'parent should not be
sleeping'.

Still, it is considered bad form and should be avoided if possible."

(Alan Stern's full comment about the topic can
be found here: <https://lkml.org/lkml/2012/7/10/254>)

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Greg KH <greg@kroah.com>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

drivers/dma/dmaengine.c: lower the priority of 'failed to get' dma channel message

Do the same as commit a03a202e9 ("dmaengine: failure to get a specific DMA
channel is not critical") to get rid of the following messages during
kernel boot:

dmaengine_get: failed to get dma1chan0: (-22)
dmaengine_get: failed to get dma1chan1: (-22)
dmaengine_get: failed to get dma1chan2: (-22)
dmaengine_get: failed to get dma1chan3: (-22)
dmaengine_get: failed to get dma1chan4: (-22)
dmaengine_get: failed to get dma1chan5: (-22)
dmaengine_get: failed to get dma1chan6: (-22)
dmaengine_get: failed to get dma1chan7: (-22)
dmaengine_get: failed to get dma1chan8: (-22)
dmaengine_get: failed to get dma1chan9: (-22)
dmaengine_get: failed to get dma1chan10: (-22)
dmaengine_get: failed to get dma1chan11: (-22)
dmaengine_get: failed to get dma1chan12: (-22)
dmaengine_get: failed to get dma1chan13: (-22)
dmaengine_get: failed to get dma1chan14: (-22)
dmaengine_get: failed to get dma1chan15: (-22)
dmaengine_get: failed to get dma1chan16: (-22)
dmaengine_get: failed to get dma1chan17: (-22)
dmaengine_get: failed to get dma1chan18: (-22)
dmaengine_get: failed to get dma1chan19: (-22)
dmaengine_get: failed to get dma1chan20: (-22)
dmaengine_get: failed to get dma1chan21: (-22)
dmaengine_get: failed to get dma1chan22: (-22)
dmaengine_get: failed to get dma1chan23: (-22)
dmaengine_get: failed to get dma1chan24: (-22)
dmaengine_get: failed to get dma1chan25: (-22)
dmaengine_get: failed to get dma1chan26: (-22)
dmaengine_get: failed to get dma1chan27: (-22)
dmaengine_get: failed to get dma1chan28: (-22)
dmaengine_get: failed to get dma1chan29: (-22)

Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Cc: Vinod Koul <vinod.koul@intel.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mn10300: only add -mmem-funcs to KBUILD_CFLAGS if gcc supports it

It seems the current (gcc 4.6.3) no longer provides this so make it
conditional.

As reported by Tony before, the mn10300 architecture cross-compiles with
gcc-4.6.3 if -mmem-funcs is not added to KBUILD_CFLAGS.

Reported-by: Tony Breeds <tony@bakeyournoodle.com>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: David Howells <dhowells@redhat.com>
Cc: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

audit.h: replace defines with C stubs

Replace the #defines used when CONFIG_AUDIT or CONFIG_AUDIT_SYSCALLS are
disabled so we get type checking during those builds.

Suggested-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

x86 numa: don't check if node is NUMA_NO_NODE

If we aren't debugging per_cpu maps, the cpu's node is stored in per_cpu
variable numa_node.  If `node' is NUMA_NO_NODE, it means the caller wants
to clear the cpu's node.  So we should also call set_cpu_numa_node() in
this case.

Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

x86/mm/init.c: devmem_is_allowed() off by one

Fix an off-by-one error in devmem_is_allowed(), which allows accesses to
physical addresses 0x100000-0x100fff, an extra page past 1MB.

Signed-off-by: T Makphaibulchoke <tmac@hp.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

arch/x86/platform/iris/iris.c: register a platform device and a platform driver

This makes the iris driver use the platform API, so it is properly exposed
in /sys.

[akpm@linux-foundation.org: remove commented-out code, add missing space to printk, clean up code layout]
Signed-off-by: Shérab <Sebastien.Hinderer@ens-lyon.org>
Cc: Len Brown <lenb@kernel.org>
Cc: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

acpi_memhotplug.c: auto bind the memory device which is hotplugged before the driver is loaded

If the memory device is hotplugged before the driver is loaded, the user
cannot see this device under the directory /sys/bus/acpi/devices/, and the
user cannot bind it by hand after the driver is loaded.  This patch
introduces a new feature to bind such device when the driver is being
loaded.

Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Cc: Len Brown <lenb@kernel.org>
Cc: "Brown, Len" <len.brown@intel.com>
Cc: Yasuaki ISIMATU <isimatu.yasuaki@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

acpi_memhotplug.c: bind the memory device when the driver is being loaded

We had introduced acpi_hotmem_initialized to avoid strange add_memory fail
message.  But the memory device may not be used by the kernel, and the
device should be bound when the driver is being loaded.  Remove
acpi_hotmem_initialized to allow that the device can be bound when the
driver is being loaded.

Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Cc: Len Brown <lenb@kernel.org>
Cc: "Brown, Len" <len.brown@intel.com>
Cc: Yasuaki ISIMATU <isimatu.yasuaki@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

acpi_memhotplug.c: don't allow to eject the memory device if it is being used

We eject the memory device even if it is in use.  It is very dangerous,
and it will cause the kernel to panic.

Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Cc: Len Brown <lenb@kernel.org>
Cc: "Brown, Len" <len.brown@intel.com>
Cc: Yasuaki ISIMATU <isimatu.yasuaki@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

acpi_memhotplug.c: remove memory info from list before freeing it

We free info, but we forget to remove it from the list.  It will cause
unexpected problems when we access the list next time.

Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Cc: Len Brown <lenb@kernel.org>
Cc: "Brown, Len" <len.brown@intel.com>
Cc: Yasuaki ISIMATU <isimatu.yasuaki@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

acpi_memhotplug.c: free memory device if acpi_memory_enable_device() failed

If acpi_memory_enable_device() fails, acpi_memory_enable_device() will
return a non-zero value, which means we fail to bind the memory device to
this driver.  So we should free memory device before
acpi_memory_device_add() returns.

Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Cc: Len Brown <lenb@kernel.org>
Cc: "Brown, Len" <len.brown@intel.com>
Cc: Yasuaki ISIMATU <isimatu.yasuaki@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

acpi_memhotplug.c: fix memory leak when memory device is unbound from the module acpi_memhotplug

We allocate memory to store acpi_memory_info, so we should free it before
freeing mem_device.

Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Cc: Len Brown <lenb@kernel.org>
Cc: "Brown, Len" <len.brown@intel.com>
Cc: Yasuaki ISIMATU <isimatu.yasuaki@jp.fujitsu.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

x86 cpu_hotplug: unmap cpu2node when the cpu is hotremoved

When a cpu is hotplugged, we call acpi_map_cpu2node() in
_acpi_map_lsapic() to store the cpu's node.  But we don't clear the cpu's
node in acpi_unmap_lsapic() when this cpu is hotremoved.  If the node is
also hotremoved, We will get the following messages:

[ 1646.771485] kernel BUG at include/linux/gfp.h:329!
[ 1646.828729] invalid opcode: 0000 [#1] SMP
[ 1646.877872] Modules linked in: ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat xt_CHECKSUM iptable_mangle bridge stp llc sunrpc ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables binfmt_misc dm_mirror dm_region_hash dm_log dm_mod vhost_net macvtap macvlan tun uinput iTCO_wdt iTCO_vendor_support coretemp kvm_intel kvm crc32c_intel microcode pcspkr i2c_i801 i2c_core lpc_ich mfd_core ioatdma e1000e i7core_edac edac_core sg acpi_memhotplug igb dca sd_mod crc_t10dif megaraid_sas mptsas mptscsih mptbase scsi_transport_sas scsi_mod
[ 1647.588773] Pid: 3126, comm: init Not tainted 3.6.0-rc3-tangchen-hostbridge+ #13 FUJITSU-SV PRIMEQUEST 1800E/SB
[ 1647.711545] RIP: 0010:[<ffffffff811bc3fd>]  [<ffffffff811bc3fd>] allocate_slab+0x28d/0x300
[ 1647.810492] RSP: 0018:ffff88078a049cf8  EFLAGS: 00010246
[ 1647.874028] RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000
[ 1647.959339] RDX: 0000000000000001 RSI: 0000000000000001 RDI: 0000000000000246
[ 1648.044659] RBP: ffff88078a049d38 R08: 00000000000040d0 R09: 0000000000000001
[ 1648.129953] R10: 0000000000000000 R11: 0000000000000b5f R12: 00000000000052d0
[ 1648.215259] R13: ffff8807c1417300 R14: 0000000000030038 R15: 0000000000000003
[ 1648.300572] FS:  00007fa9b1b44700(0000) GS:ffff8807c3800000(0000) knlGS:0000000000000000
[ 1648.397272] CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 1648.465985] CR2: 00007fa9b09acca0 CR3: 000000078b855000 CR4: 00000000000007e0
[ 1648.551265] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1648.636565] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 1648.721838] Process init (pid: 3126, threadinfo ffff88078a048000, task ffff8807bb6f2650)
[ 1648.818534] Stack:
[ 1648.842548]  ffff8807c39d7fa0 ffffffff000040d0 00000000000000bb 00000000000080d0
[ 1648.931469]  ffff8807c1417300 ffff8807c39d7fa0 ffff8807c1417300 0000000000000001
[ 1649.020410]  ffff88078a049d88 ffffffff811bc4a0 ffff8807c1410c80 0000000000000000
[ 1649.109464] Call Trace:
[ 1649.138713]  [<ffffffff811bc4a0>] new_slab+0x30/0x1b0
[ 1649.199075]  [<ffffffff811bc978>] __slab_alloc+0x358/0x4c0
[ 1649.264683]  [<ffffffff810b71c0>] ? alloc_fair_sched_group+0xd0/0x1b0
[ 1649.341695]  [<ffffffff811be7d4>] kmem_cache_alloc_node_trace+0xb4/0x1e0
[ 1649.421824]  [<ffffffff8109d188>] ? hrtimer_init+0x48/0x100
[ 1649.488414]  [<ffffffff810b71c0>] ? alloc_fair_sched_group+0xd0/0x1b0
[ 1649.565402]  [<ffffffff810b71c0>] alloc_fair_sched_group+0xd0/0x1b0
[ 1649.640297]  [<ffffffff810a8bce>] sched_create_group+0x3e/0x110
[ 1649.711040]  [<ffffffff810bdbcd>] sched_autogroup_create_attach+0x4d/0x180
[ 1649.793260]  [<ffffffff81089614>] sys_setsid+0xd4/0xf0
[ 1649.854694]  [<ffffffff8167a029>] system_call_fastpath+0x16/0x1b
[ 1649.926483] Code: 89 c4 e9 73 fe ff ff 31 c0 89 de 48 c7 c7 45 de 9e 81 44 89 45 c8 e8 22 05 4b 00 85 db 44 8b 45 c8 0f 89 4f ff ff ff 0f 0b eb fe <0f> 0b 90 eb fd 0f 0b eb fe 89 de 48 c7 c7 45 de 9e 81 31 c0 44
[ 1650.161454] RIP  [<ffffffff811bc3fd>] allocate_slab+0x28d/0x300
[ 1650.232348]  RSP <ffff88078a049cf8>
[ 1650.274029] ---[ end trace adf84c90f3fea3e5 ]---

The reason is that: the cpu's node is not NUMA_NO_NODE, we will call
alloc_pages_exact_node() to alloc memory on the node, but the node is
offlined.

Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

vfs: d_obtain_alias() needs to use "/" as default name.

NFS appears to use d_obtain_alias() to create the root dentry rather than
d_make_root.  This can cause 'prepend_path()' to complain that the root
has a weird name if an NFS filesystem is lazily unmounted.  e.g.  if
"/mnt" is an NFS mount then

 { cd /mnt; umount -l /mnt ; ls -l /proc/self/cwd; }

will cause a WARN message like
   WARNING: at /home/git/linux/fs/dcache.c:2624 prepend_path+0x1d7/0x1e0()
   ...
   Root dentry has weird name <>

to appear in kernel logs.

So change d_obtain_alias() to use "/" rather than "" as the anonymous
name.

Signed-off-by: NeilBrown <neilb@suse.de>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

selinux: fix sel_netnode_insert() suspicious rcu dereference

===============================
[ INFO: suspicious RCU usage. ]
3.5.0-rc1+ #63 Not tainted
-------------------------------
security/selinux/netnode.c:178 suspicious rcu_dereference_check() usage!

other info that might help us debug this:

rcu_scheduler_active = 1, debug_locks = 0
1 lock held by trinity-child1/8750:
 #0:  (sel_netnode_lock){+.....}, at: [<ffffffff812d8f8a>] sel_netnode_sid+0x16a/0x3e0

stack backtrace:
Pid: 8750, comm: trinity-child1 Not tainted 3.5.0-rc1+ #63
Call Trace:
 [<ffffffff810cec2d>] lockdep_rcu_suspicious+0xfd/0x130
 [<ffffffff812d91d1>] sel_netnode_sid+0x3b1/0x3e0
 [<ffffffff812d8e20>] ? sel_netnode_find+0x1a0/0x1a0
 [<ffffffff812d24a6>] selinux_socket_bind+0xf6/0x2c0
 [<ffffffff810cd1dd>] ? trace_hardirqs_off+0xd/0x10
 [<ffffffff810cdb55>] ? lock_release_holdtime.part.9+0x15/0x1a0
 [<ffffffff81093841>] ? lock_hrtimer_base+0x31/0x60
 [<ffffffff812c9536>] security_socket_bind+0x16/0x20
 [<ffffffff815550ca>] sys_bind+0x7a/0x100
 [<ffffffff816c03d5>] ? sysret_check+0x22/0x5d
 [<ffffffff810d392d>] ? trace_hardirqs_on_caller+0x10d/0x1a0
 [<ffffffff8133b09e>] ? trace_hardirqs_on_thunk+0x3a/0x3f
 [<ffffffff816c03a9>] system_call_fastpath+0x16/0x1b

This patch below does what Paul McKenney suggested in the previous thread.

Signed-off-by: Dave Jones <davej@redhat.com>
Reviewed-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Cc: Eric Paris <eparis@parisplace.org>
Cc: James Morris <jmorris@namei.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

drivers/scsi/ipr.c: missing unlock before a return

We recently changed the locking in this function, but this return was
missed.  It needs an unlock and the IRQs need to be restored.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Brian King <brking@linux.vnet.ibm.com>
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

CRIS: Fix I/O macros

The inb/outb macros for CRIS are broken from a number of points of view,
missing () around parameters and they have an unprotected if statement in
them.  This was breaking the compile of IPMI on CRIS and thus I was being
annoyed by build regressions, so I fixed them.

Plus I don't think they would have worked at all, since the data values
were missing "&" and the outsl had a "3" instead of a "4" for the size.
From what I can tell, this stuff is not used at all, so this can't be any
more broken than it was before, anyway.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: Jesper Nilsson <jesper.nilsson@axis.com>
Cc: Mikael Starvik <starvik@axis.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

compiler.h: add __visible

gcc 4.6+ has support for a externally_visible attribute that prevents the
optimizer from optimizing unused symbols away.  Add a __visible macro to
use it with that compiler version or later.

This is used (at least) by the "Link Time Optimization" patchset.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

pid-namespace: limit value of ns_last_pid to (0, max_pid)

The kernel doesn't check the pid for negative values, so if you try to
write -2 to /proc/sys/kernel/ns_last_pid, you will get a kernel panic.

The crash happens because the next pid is -1, and alloc_pidmap() will try
to access to a nonexistent pidmap.

map = &pid_ns->pidmap[pid/BITS_PER_PAGE];

Signed-off-by: Andrew Vagin <avagin@openvz.org>
Acked-by: Cyrill Gorcunov <gorcunov@openvz.org>
Acked-by: Oleg Nesterov <oleg@redhat.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Pavel Emelyanov <xemul@parallels.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

include/net/sock.h: squelch compiler warning in sk_rmem_schedule()

In file included from linux/include/linux/tcp.h:227:0,
                 from linux/include/linux/ipv6.h:221,
                 from linux/include/net/ipv6.h:16,
                 from linux/include/linux/sunrpc/clnt.h:26,
                 from linux/net/sunrpc/stats.c:22:
linux/include/net/sock.h: In function `sk_rmem_schedule':
linux/nfs-2.6/include/net/sock.h:1339:13: warning: comparison between
  signed and unsigned integer expressions [-Wsign-compare]

Seen with gcc (GCC) 4.6.3 20120306 (Red Hat 4.6.3-2) using the
-Wextra option.

c76562b6 ("netvm: prevent a stream-specific deadlock") accidentally
replaced the "size" parameter of sk_rmem_schedule() with an unsigned int.
This changes the semantics of the comparison in the return statement.

In sk_wmem_schedule we have syntactically the same comparison, but "size"
is a signed integer.  In addition, __sk_mem_schedule() takes a signed
integer for its "size" parameter, so there is an implicit type conversion
in sk_rmem_schedule() anyway.

Revert the "size" parameter back to a signed integer so that the semantics
of the expressions in both sk_[rw]mem_schedule() are exactly the same.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: David Miller <davem@davemloft.net>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

slub: consider pfmemalloc_match() in get_partial_node()

get_partial() is currently not checking pfmemalloc_match() meaning that it
is possible for pfmemalloc pages to leak to non-pfmemalloc users.  This is
a problem in the following situation.  Assume that there is a request from
normal allocation and there are no objects in the per-cpu cache and no
node-partial slab.

In this case, slab_alloc enters the slow path and new_slab_objects() is
called which may return a PFMEMALLOC page.  As the current user is not
allowed to access PFMEMALLOC page, deactivate_slab() is called ([5091b74a:
mm: slub: optimise the SLUB fast path to avoid pfmemalloc checks]) and
returns an object from PFMEMALLOC page.

Next time, when we get another request from normal allocation,
slab_alloc() enters the slow-path and calls new_slab_objects().  In
new_slab_objects(), we call get_partial() and get a partial slab which was
just deactivated but is a pfmemalloc page.  We extract one object from it
and re-deactivate.

"deactivate -> re-get in get_partial -> re-deactivate" occures repeatedly.

As a result, access to PFMEMALLOC page is not properly restricted and it
can cause a performance degradation due to frequent deactivation.
deactivation frequently.

This patch changes get_partial_node() to take pfmemalloc_match() into
account and prevents the "deactivate -> re-get in get_partial() scenario.
Instead, new_slab() is called.

Signed-off-by: Joonsoo Kim <js1304@gmail.com>
Acked-by: David Rientjes <rientjes@google.com>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: David Miller <davem@davemloft.net>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

slab: fix starting index for finding another object

In array cache, there is a object at index 0, check it.

Signed-off-by: Joonsoo Kim <js1304@gmail.com>
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: David Miller <davem@davemloft.net>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

slab: do ClearSlabPfmemalloc() for all pages of slab

Right now, we call ClearSlabPfmemalloc() for first page of slab when we
clear SlabPfmemalloc flag.  This is fine for most swap-over-network use
cases as it is expected that order-0 pages are in use.  Unfortunately it
is possible that that __ac_put_obj() checks SlabPfmemalloc on a tail page
and while this is harmless, it is sloppy.  This patch ensures that the
head page is always used.

This problem was originally identified by Joonsoo Kim.

[js1304@gmail.com: Original implementation and problem identification]
Signed-off-by: Mel Gorman <mgorman@suse.de>
Cc: David Miller <davem@davemloft.net>
Cc: Chuck Lever <chuck.lever@oracle.com>
Cc: Joonsoo Kim <js1304@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Pekka Enberg <penberg@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

nbd: clear waiting_queue on shutdown

Fix a serious but uncommon bug in nbd which occurs when there is heavy I/O
going to the nbd device while, at the same time, a failure (server,
network) or manual disconnect of the nbd connection occurs.

There is a small window between the time that the nbd_thread is stopped
and the socket is shutdown where requests can continue to be queued to
nbd's internal waiting_queue.  When this happens, those requests are never
completed or freed.

The fix is to clear the waiting_queue on shutdown of the nbd device, in
the same way that the nbd request queue (queue_head) is already being cleared.

Signed-off-by: Paul Clements <paul.clements@steeleye.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

MAINTAINERS: fix TXT maintainer list and source repo path

Signed-off-by: Gang Wei <gang.wei@intel.com>
Cc: Richard L Maliszewski <richard.l.maliszewski@intel.com>
Cc: Gang Wei <gang.wei@intel.com>
Cc: Shane Wang <shane.wang@intel.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

mm/ia64: fix a memory block size bug

I found following definition in include/linux/memory.h, in my IA64
platform, SECTION_SIZE_BITS is equal to 32, and MIN_MEMORY_BLOCK_SIZE will
be 0.

#define MIN_MEMORY_BLOCK_SIZE     (1 << SECTION_SIZE_BITS)

will equal to 0.  This will cause wrong system memory infomation in sysfs.
 I think it should be:

#define MIN_MEMORY_BLOCK_SIZE     (1UL << SECTION_SIZE_BITS)

linux-drf:/sys/devices/system/memory # ll
total 0
-r--r--r-- 1 root root 65536 Aug 20 02:35 block_size_bytes
drwxr-xr-x 3 root root     0 Aug 20 02:19 memory0
drwxr-xr-x 2 root root     0 Aug 20 02:35 power
-rw-r--r-- 1 root root 65536 Aug 20 02:35 uevent

linux-drf:/sys/devices/system/memory # cat block_size_bytes
0

linux-drf:/sys/devices/system/memory/memory0 # cat *
8000000000000000
cat: node0: Is a directory
cat: node1: Is a directory
cat: node2: Is a directory
cat: node3: Is a directory
0
8000000000000000
cat: power: Is a directory
1
online
cat: subsystem: Is a directory

And "echo offline > memory0/state" will cause following call trace:

kernel BUG at mm/memory_hotplug.c:885!
sh[6455]: bugcheck! 0 [1]

Pid: 6455, CPU 0, comm:                   sh
psr : 0000101008526030 ifs : 8000000000000fa4 ip  : [<a0000001008c40f0>]    Not tainted (3.6.0-rc1)
ip is at offline_pages+0x210/0xee0
unat: 0000000000000000 pfs : 0000000000000fa4 rsc : 0000000000000003
rnat: a0000001008f2d50 bsps: 0000000000000000 pr  : 65519a96659a9565
ldrs: 0000000000000000 ccv : 0000010b9263f310 fpsr: 0009804c0270033f
csd : 0000000000000000 ssd : 0000000000000000
b0  : a0000001008c40f0 b6  : a000000100473980 b7  : a0000001000106d0
f6  : 000000000000000000000 f7  : 1003e0000000085c9354c
f8  : 1003e0044b82fa09b5a53 f9  : 1003e000000d65cd62abf
f10 : 1003efd02efdec682803d f11 : 1003e0000000000000042
r1  : a00000010152c2e0 r2  : 0000000000006ada r3  : 000000000000fffe
r8  : 0000000000000026 r9  : a00000010121cc18 r10 : a0000001013309f0
r11 : 65519a96659a19e9 r12 : e00000070a91fdf0 r13 : e00000070a910000
r14 : 0000000000006ada r15 : 0000000000004000 r16 : 000000006ad8356c
r17 : a0000001019a525e r18 : 0000000000007fff r19 : 0000000000000000
r20 : 0000000000006ad6 r21 : 0000000000006ad6 r22 : a00000010133bec8
r23 : 0000000000006ad4 r24 : 0000000000000002 r25 : 8200000000260038
r26 : 00000000000004f9 r27 : 00000000000004f8 r28 : 000000000001cf98
r29 : 0000000000000038 r30 : a0000001019a5ae0 r31 : 000000000001cf60

Call Trace:
 [<a0000001000163e0>] show_stack+0x80/0xa0
                                sp=e00000070a91f9b0 bsp=e00000070a9115e0
 [<a000000100016a40>] show_regs+0x640/0x920
                                sp=e00000070a91fb80 bsp=e00000070a911588
 [<a000000100040590>] die+0x190/0x2c0
                                sp=e00000070a91fb90 bsp=e00000070a911548
 [<a000000100040710>] die_if_kernel+0x50/0x80
                                sp=e00000070a91fb90 bsp=e00000070a911518
 [<a0000001008f8030>] ia64_bad_break+0x3d0/0x6e0
                                sp=e00000070a91fb90 bsp=e00000070a9114f0
 [<a00000010000c0c0>] ia64_native_leave_kernel+0x0/0x270
                                sp=e00000070a91fc20 bsp=e00000070a9114f0
 [<a0000001008c40f0>] offline_pages+0x210/0xee0
                                sp=e00000070a91fdf0 bsp=e00000070a9113c8
 [<a00000010022d580>] alloc_pages_current+0x180/0x2a0
                                sp=e00000070a91fe20 bsp=e00000070a9113a

Signed-off-by: Jianguo Wu <wujianguo@huawei.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

memory hotplug: reset pgdat->kswapd to NULL if creating kernel thread fails

If kthread_run() fails, pgdat->kswapd contains errno.  When we stop this
thread, we only check whether pgdat->kswapd is NULL and access it.  If it
contains errno, it will cause page fault.  Reset pgdat->kswapd to NULL
when creating kernel thread fails can avoid this problem.

Signed-off-by: Wen Congyang <wency@cn.fujitsu.com>
Reviewed-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Merge remote-tracking branch 'clk/clk-next'

Conflicts:
arch/arm/mach-ux500/clock.c

Merge remote-tracking branch 'signal/for-next'

Conflicts:
arch/cris/include/asm/Kbuild
arch/h8300/include/asm/Kbuild
arch/m32r/include/asm/Kbuild
arch/x86/kernel/signal.c

Merge remote-tracking branch 'userns/for-next'

Merge remote-tracking branch 'pwm/for-next'

Merge remote-tracking branch 'dma-mapping/dma-mapping-next'

Merge remote-tracking branch 'kvmtool/master'

Merge remote-tracking branch 'tegra/for-next'

Conflicts:
arch/arm/mach-tegra/devices.c
arch/arm/mach-tegra/devices.h
drivers/usb/phy/tegra_usb_phy.c

Merge remote-tracking branch 'samsung/for-next'

Conflicts:
drivers/pinctrl/Makefile

Merge remote-tracking branch 'renesas/next'

Merge remote-tracking branch 'msm/for-next'

Merge remote-tracking branch 'ixp4xx/next'

Merge remote-tracking branch 'ep93xx/ep93xx-for-next'

Merge remote-tracking branch 'arm-soc/for-next'

Conflicts:
arch/arm/mach-ux500/cpu-db8500.c
drivers/mtd/nand/Kconfig
drivers/usb/host/Kconfig

Merge remote-tracking branch 'gpio-lw/for-next'

Merge remote-tracking branch 'remoteproc/for-next'

Merge remote-tracking branch 'vhost/linux-next'

Conflicts:
drivers/net/tun.c

Merge remote-tracking branch 'pinctrl/for-next'

Merge remote-tracking branch 'writeback/writeback-for-next'

Merge remote-tracking branch 'tmem/linux-next'

Merge remote-tracking branch 'char-misc/char-misc-next'

Merge remote-tracking branch 'staging/staging-next'

Conflicts:
drivers/staging/omap-thermal/omap-thermal-common.c

Merge remote-tracking branch 'usb/usb-next'

Conflicts:
drivers/usb/dwc3/gadget.c
drivers/usb/musb/tusb6010.c

Merge remote-tracking branch 'tty/tty-next'

Merge remote-tracking branch 'driver-core/driver-core-next'

Merge remote-tracking branch 'leds/for-next'

Merge remote-tracking branch 'regmap/for-next'

Merge remote-tracking branch 'drivers-x86/linux-next'

Merge remote-tracking branch 'workqueues/for-next'

Conflicts:
drivers/hid/hid-picolcd.c
drivers/video/omap2/displays/panel-taal.c

Merge remote-tracking branch 'xen-two/linux-next'

Merge remote-tracking branch 'kvm-ppc/kvm-ppc-next'

Conflicts:
arch/powerpc/include/asm/kvm_ppc.h
arch/powerpc/kvm/e500_tlb.c
include/linux/kvm.h

Merge remote-tracking branch 'kvm/linux-next'

Conflicts:
arch/s390/include/asm/processor.h
arch/x86/kvm/i8259.c

Merge remote-tracking branch 'kmemleak/kmemleak'

Merge remote-tracking branch 'rcu/rcu/next'

Conflicts:
arch/Kconfig
arch/x86/Kconfig
kernel/rcutree.h
kernel/rcutree_plugin.h
kernel/sched/core.c

Merge remote-tracking branch 'tip/auto-latest'

Conflicts:
arch/Kconfig

Merge remote-tracking branch 'spi-mb/spi-next'

Conflicts:
drivers/mmc/host/mxs-mmc.c

Merge remote-tracking branch 'dt-rh/for-next'

Merge remote-tracking branch 'edac-amd/for-next'

Conflicts:
Documentation/edac.txt
drivers/edac/amd64_edac.c

Merge remote-tracking branch 'edac/linux_next'

Merge remote-tracking branch 'fsnotify/for-next'

Conflicts:
kernel/audit_tree.c

Merge remote-tracking branch 'apm/for-next'

Merge remote-tracking branch 'pm/linux-next'

Merge remote-tracking branch 'trivial/for-next'

Conflicts:
drivers/scsi/ipr.c
drivers/video/backlight/88pm860x_bl.c

Merge remote-tracking branch 'osd/linux-next'

Merge remote-tracking branch 'iommu/next'

Merge remote-tracking branch 'watchdog/master'

Merge remote-tracking branch 'selinux/master'

Merge remote-tracking branch 'security/next'

Merge remote-tracking branch 'regulator/for-next'

Conflicts:
Documentation/devicetree/bindings/regulator/tps6586x.txt

Merge remote-tracking branch 'omap_dss2/for-next'

Merge remote-tracking branch 'fbdev/fbdev-next'

Merge remote-tracking branch 'battery/master'

Merge remote-tracking branch 'mfd/for-next'

Conflicts:
Documentation/devicetree/bindings/regulator/tps6586x.txt

Merge remote-tracking branch 'md/for-next'

Merge remote-tracking branch 'slab/for-next'

Merge remote-tracking branch 'kgdb/kgdb-next'

Merge remote-tracking branch 'mmc/mmc-next'