David S. Miller [Fri, 3 Apr 2015 19:08:20 +0000 (15:08 -0400)]
Merge branch 'mvneta-sgmii'
Stas Sergeev says:
====================
mvneta: SGMII-based in-band link state signaling
Currently the fixed-link DT binding is pre-configured and
cannot be changed in run-time. This means the cable unplug
events are not being detected, and the link parameters can't
be negotiated.
The following patches are needed when mvneta is used
in fixed-link mode (without MDIO).
They add an API to fixed_phy that allows to update
status, and use that API in the mvneta driver when parsing
the SGMII in-band status.
There is also another implementation that doesn't add any API
and does everything in mvneta driver locally:
https://lkml.org/lkml/2015/3/31/327
I'll let people decide which approach is better.
No strong opinion on my side.
====================
Signed-off-by: Stas Sergeev <stsp@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
mvneta: implement SGMII-based in-band link state signaling
When MDIO bus is unavailable (common setup for SGMII), the in-band
signaling must be used to correctly track link state.
This patch enables the in-band status delivery for link state changes, namely:
- link up/down
- link speed
- duplex full/half
fixed_phy_update_state() is used to update phy status.
CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> CC: Florian Fainelli <f.fainelli@gmail.com> CC: netdev@vger.kernel.org CC: linux-kernel@vger.kernel.org Signed-off-by: Stas Sergeev <stsp@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
add fixed_phy_update_state() - update state of fixed_phy
Currently fixed_phy uses a callback to periodically poll the link state.
This patch adds the fixed_phy_update_state() API.
It solves the following problems:
- On link state interrupt, MAC driver can't update status.
Instead it needs to provide the callback to periodically query
the HW about the link state. It is more efficient to update status
after interrupt.
- The callback needs to be unregistered before phy_disconnect(),
or otherwise it will be called with net_dev==NULL. phy_disconnect()
does not have enough info to unregister the callback automatically.
- The callback needs to be registered before of_phy_connect() to
avoid running with outdated state, but of_phy_connect() returns the
phy_device pointer, which is needed to register the callback. Registering
it before of_phy_connect() will therefore require a hack to get the
pointer earlier.
Overall, this addition makes the subsequent patch that implements
SGMII link status for mvneta, much cleaner.
CC: Florian Fainelli <f.fainelli@gmail.com> CC: netdev@vger.kernel.org CC: linux-kernel@vger.kernel.org Signed-off-by: Stas Sergeev <stsp@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann [Fri, 3 Apr 2015 18:52:24 +0000 (20:52 +0200)]
ebpf: add skb->priority to offset map for usage in {cls, act}_bpf
This adds the ability to read out the skb->priority from an eBPF
program, so that it can be taken into account from a tc filter
or action for the use-case where the priority is not being used
to directly override the filter classification in a qdisc, but
to tag traffic otherwise for the classifier; the priority can be
assigned from various places incl. user space, in future we may
also mangle it from an eBPF program.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Cc: Alexei Starovoitov <ast@plumgrid.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Alexander Duyck [Tue, 31 Mar 2015 21:19:10 +0000 (14:19 -0700)]
jhash: Update jhash_[321]words functions to use correct initval
Looking over the implementation for jhash2 and comparing it to jhash_3words
I realized that the two hashes were in fact very different. Doing a bit of
digging led me to "The new jhash implementation" in which lookup2 was
supposed to have been replaced with lookup3.
In reviewing the patch I noticed that jhash2 had originally initialized a
and b to JHASH_GOLDENRATIO and c to initval, but after the patch a, b, and
c were initialized to initval + (length << 2) + JHASH_INITVAL. However the
changes in jhash_3words simply replaced the initialization of a and b with
JHASH_INITVAL.
This change corrects what I believe was an oversight so that a, b, and c in
jhash_3words all have the same value added consisting of initval + (length
<< 2) + JHASH_INITVAL so that jhash2 and jhash_3words will now produce the
same hash result given the same inputs.
Fixes: 60d509c823cca ("The new jhash implementation") Signed-off-by: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 3 Apr 2015 16:40:50 +0000 (12:40 -0400)]
Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue
Jeff Kirsher says:
====================
Intel Wired LAN Driver Updates 2015-04-03
This series contains updates to i40e and i40evf only.
Anjali provides a fix for verifying outer UDP receive checksum. Also
adds helpful information to display when figuring out the cause of
HMC errors.
Mitch provides a fix to prevent a malicious or buggy VF driver from
sending an invalid index into the VSI array which could panic the host.
Cleans up the code where a function was moved, but the message did
not follow. Adds protection to the VLAN filter list, same as the
MAC filter list, to protect from corruption if the watchdog happens
to run at the same time as a VLAN filter is being added/deleted.
Jesse changes several memcpy() statements to struct assignments which
are type safe and preferable. Fixed a bug when skb allocation fails,
where we should not continue using the skb pointer. Also fixed a void
function in FCoE which should not be returning anything.
Greg fixes both i40e and i40evf to set the Ethernet protocol correctly
when transmit VLAN offloads are disabled.
Shannon fixes up VLAN messages when ports are added or removed, which
were giving bogus index info. Also aligned the message text style
with other messages in the driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Rusty Russell [Fri, 3 Apr 2015 11:47:17 +0000 (22:17 +1030)]
netdevice: document NETDEV_TX_BUSY deprecation.
This paraphrases DaveM (and steals some of his words) explaining why
a device shouldn't return NETDEV_TX_BUSY, even though it looks so inviting
to driver authors.
See http://www.spinics.net/lists/netdev/msg322350.html
Inspired-by: David Miller <davem@davemloft.net> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Fri, 3 Apr 2015 16:11:15 +0000 (12:11 -0400)]
Merge branch 'ipv4-null-cmp'
Ian Morris says:
====================
ipv4: coding style - comparisons with NULL
Per the suggestion of Joe Perches, attached is a patch which aligns the
coding style in ipv4 for comparisons with NULL.
The code uses multiple different styles when comparing with NULL (I.e.
x == NULL and !x as well as x != NULL and x). Generally the latter form
is preferred in netdev and so this changes aligns the code to this style.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Ian Morris [Fri, 3 Apr 2015 08:17:27 +0000 (09:17 +0100)]
ipv4: coding style: comparison for inequality with NULL
The ipv4 code uses a mixture of coding styles. In some instances check
for non-NULL pointer is done as x != NULL and sometimes as x. x is
preferred according to checkpatch and this patch makes the code
consistent by adopting the latter form.
No changes detected by objdiff.
Signed-off-by: Ian Morris <ipm@chirality.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
Ian Morris [Fri, 3 Apr 2015 08:17:26 +0000 (09:17 +0100)]
ipv4: coding style: comparison for equality with NULL
The ipv4 code uses a mixture of coding styles. In some instances check
for NULL pointer is done as x == NULL and sometimes as !x. !x is
preferred according to checkpatch and this patch makes the code
consistent by adopting the latter form.
No changes detected by objdiff.
Signed-off-by: Ian Morris <ipm@chirality.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
Change-ID: I7dc88baa33264e5919bc938adf76706573209432 Signed-off-by: Catherine Sullivan <catherine.sullivan@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Refactor VF RSS code to allow RSS on a single queue and eliminate
the need for the next_queue function.
Change-ID: I9253bad96b7f542ee7036e15636db0e5d58d8ef2 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Mitch Williams [Tue, 31 Mar 2015 07:45:05 +0000 (00:45 -0700)]
i40evf: protect VLAN filter list
The MAC filter list is protected by a critical task bit, and the VLAN
list should be protected as well. This prevents list corruption if the
watchdog happens to run at the same time as a VLAN filter is being added
or deleted.
Change-ID: Ia4867cebbbb046a1f38012771b288a634ca5882b Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
i40e: Communicate VSI id in place of VSI index to the VFs
This does not affect the Virtual channel API as such but it changes the
meaning of what is communicated to the VSI resource struct as vsi_id.
Earlier vsi_idx was being passed in, which was the index in the PF's VSI
array. Now we pass vsi_id as communicated by the FW to the driver.
This will help with future expansion of VF and FW communication.
With this in place now the VF and Virtual channel driver change to move over
to VSI id use is complete and is validated.
Change-ID: I14246ef82b3b3dc1fa76291d2dd0c05d12cedb7c Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Mitch Williams [Tue, 31 Mar 2015 07:45:04 +0000 (00:45 -0700)]
i40e: stop flow director on shutdown
In some cases, the hardware would continue to try to access the FDIR
ring after entering D3Hot state, which would cause either PCIe errors or
NMIs, depending upon system configuration.
Explicitly stop FDIR in our shutdown routine to eliminate this
possibility.
Change-ID: Ib98060d6352ec595ab9a78bfe252675a9fa5d8bc Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Shannon Nelson [Tue, 31 Mar 2015 07:45:04 +0000 (00:45 -0700)]
i40e: fix up VXLAN messages
When the VXLAN ports are added and removed, the messaging was giving some
bogus index info, the port was always '0' for the delete, and the message
text style didn't match other messages in the driver. Also, there was an
over-use of the tertiary statement which made reading a little harder
than necessary.
Change-ID: Ie805182a697b8b4c12024403ada87fd4e4fa2358 Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Neerav Parikh [Tue, 31 Mar 2015 07:45:03 +0000 (00:45 -0700)]
i40e: Don't register/de-register apps on NIC partitions in MFP mode
Do not register or try to de-register DCB applications with the DCBNL
layer in case of NIC partitions when adapter is in MFP mode.
Change-ID: I603d042a61983a6562be471c6a2b181572504118 Signed-off-by: Neerav Parikh <neerav.parikh@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Greg Rose [Tue, 31 Mar 2015 07:45:03 +0000 (00:45 -0700)]
i40e/i40evf: Set Ethernet protocol correctly when Tx VLAN offloads are disabled
If transmit VLAN HW offloads are disabled then the network stack sends up
an skb with the protocol set to 8021q. In that case to get the correct
checksum offloads we have to reset the skb protocol to the encapsulated
ethertype.
Change-ID: I903d78533de09b1c5d3ec695ee1990dd0fa5dd0d Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Mitch Williams [Tue, 31 Mar 2015 07:45:02 +0000 (00:45 -0700)]
i40e: warn at the right time
The call to pci_disable_sriov got moved, but the message about not
disabling VFs didn't move. So move it. While we're at, reword the
message a bit to make it more consistent with other driver messages.
Change-ID: I17d3e15e4fcfd5c9431a96ecb0117d728d3da18b Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Jesse Brandeburg [Tue, 31 Mar 2015 07:45:02 +0000 (00:45 -0700)]
i40e: fix invalid void return in FCoE code
A function was calling i40e_tx_map with return, but tx_map returns
void, and the caller returns void, so just drop the return, and
everything is good.
Change-ID: I53fc676d517864761e7cbb8ca83f1ef0c15b1f8f Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Jesse Brandeburg [Tue, 31 Mar 2015 07:45:01 +0000 (00:45 -0700)]
i40e/i40evf: fix bug when skb allocation fails
If the skb allocation fails we should not continue using the skb
pointer. Breaking out at the point of failure means that at the next
RX interrupt the driver will try the allocation again.
Change-ID: Iefaad69856ced7418bfd92afe55322676341f82e Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Jesse Brandeburg [Tue, 31 Mar 2015 07:45:01 +0000 (00:45 -0700)]
i40e: Change some memcpys to struct assignments
Several memcpys are not necessary and can be changed to structure
assignments. Struct assignments are always type safe so this
is preferable.
Change-ID: I7daf45a4b5e799c686b9d5c8ba9db047584ab82b Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
i40e: Print some more info to help figure out the cause of HMC error
HMC_ERRORINFO and HMC_ERRORDATA helps explain the cause of HMC error.
Change-ID: I053bbc175a5f4c5c3e9ec2ea7400d5c56aaa4ec1 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Mitch Williams [Tue, 31 Mar 2015 07:45:00 +0000 (00:45 -0700)]
i40e: validate VSI param from VFs
Validate that the VF has sent us a valid VSI index before actually using
that index. Without this code, a malicious or buggy VF driver could
panic the host by sending an invalid index into the VSI array.
Change-ID: I66a177687a0dcc281ec83e714d3813d70d18c8b4 Reported-by: Nick Nunley <nicholas.d.nunley@intel.com> Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Inner protocol being UDP should not stop us from verifying Outer UDP
checksum correctness.
If the Outer protocol is not UDP (NVGRE) we should not be doing a UDP
checksum check. If the packet has zero checksum, skip checksum check.
Change-ID: Ie7f153feb276a59f66a54a0938901b2c0a8100fa Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
David S. Miller [Thu, 2 Apr 2015 20:33:43 +0000 (16:33 -0400)]
Merge branch 'mlx5-next'
Eli Cohen says:
====================
mlx5 batch of patches for net-next
This series contains small fixes to the mlx5 core driver and also
preparation steps towards adding Ethernet support for ConnectX4
devices which will be part of mlx5 driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
net/mlx5_core: Extend struct mlx5_interface to support multiple protocols
Preparation for ethernet driver.
Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net/mlx5_core: Move completion eqs from mlx5_ib to mlx5_core
Preparation for ethernet driver.
These functions will be used in drivers other than mlx5_ib.
Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net/mlx5_core: Update module info macros for ConnectX4 Support
Declare the support of new ConnectX4 HCA in module info
Pump up the module version
Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
In alloc_token(), the token '1' would be allocated twice consecutively.
Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Ira Gusinsky [Thu, 2 Apr 2015 14:07:27 +0000 (17:07 +0300)]
net/mlx5_core: Avoid usage command work entry after writing command doorbell
Avoid usage of command work entry in cmd_work_handler since it can be released
by mlx5_cmd_invoke before the work handler returns to running.
Signed-off-by: Ira Gusinsky <irenag@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eli Cohen [Thu, 2 Apr 2015 14:07:26 +0000 (17:07 +0300)]
net/mlx5_core: Avoid copying outbox in aysnc command completion
Avoid copying to the output buffer in cmd_exec since this is done after the
command is completed. Failure to do this may cause cases where the callback
handler is called before the copy done by cmd_exec which then overwrites it.
Reported-by: Tamer Hleihel <tamerh@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Eli Cohen [Thu, 2 Apr 2015 14:07:25 +0000 (17:07 +0300)]
net/mlx5_core: Use coherent memory for command interface page
Use coherent memory for the commands descriptor page. Take measures to make
sure the page is aligned to MLX5_ADAPTER_PAGE_SIZE as required by the hardware.
Reported-by: Yevgeny Kliteynik <kliteyn@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net/mlx5_core: Use the right inbox struct in destroy mkey command
struct mlx5_query_mkey_mbox_in rather than mlx5_destroy_mkey_mbox_in
Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net/mlx5_core: Clear doorbell record inside mlx5_db_alloc()
Do it in one place instead of every where the function is invoked
Signed-off-by: Achiad Shochat <achiad@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Haggai Abramovsky <hagaya@mellanox.com> Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 2 Apr 2015 20:27:13 +0000 (16:27 -0400)]
Merge branch 'tipc-next'
Jon Maloy says:
====================
tipc: remove some unnecessary complexity
The TIPC code is unnecessarily complex in some places, often because
the conditions or assumptions that were the cause for the complexity
are not valid anymore.
In these three commits, we eliminate some cases of such redundant
complexity.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Paul Maloy [Thu, 2 Apr 2015 13:33:02 +0000 (09:33 -0400)]
tipc: simplify link mtu negotiation
When a link is being established, the two endpoints advertise their
respective interface MTU in the transmitted RESET and ACTIVATE messages.
If there is any difference, the lower of the two MTUs will be selected
for use by both endpoints.
However, as a remnant of earlier attempts to introduce TIPC level
routing. there also exists an MTU discovery mechanism. If an intermediate
node has a lower MTU than the two endpoints, they will discover this
through a bisectional approach, and finally adopt this MTU for common use.
Since there is no TIPC level routing, and probably never will be,
this mechanism doesn't make any sense, and only serves to make the
link level protocol unecessarily complex.
In this commit, we eliminate the MTU discovery algorithm,and fall back
to the simple MTU advertising approach. This change is fully backwards
compatible.
Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Paul Maloy [Thu, 2 Apr 2015 13:33:01 +0000 (09:33 -0400)]
tipc: eliminate delayed link deletion at link failover
When a bearer is disabled manually, all its links have to be reset
and deleted. However, if there is a remaining, parallel link ready
to take over a deleted link's traffic, we currently delay the delete
of the removed link until the failover procedure is finished. This
is because the remaining link needs to access state from the reset
link, such as the last received packet number, and any partially
reassembled buffer, in order to perform a successful failover.
In this commit, we do instead move the state data over to the new
link, so that it can fulfill the procedure autonomously, without
accessing any data on the old link. This means that we can now
proceed and delete all pertaining links immediately when a bearer
is disabled. This saves us from some unnecessary complexity in such
situations.
We also choose to change the confusing definitions CHANGEOVER_PROTOCOL,
ORIGINAL_MSG and DUPLICATE_MSG to the more descriptive TUNNEL_PROTOCOL,
FAILOVER_MSG and SYNCH_MSG respectively.
Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Jon Paul Maloy [Thu, 2 Apr 2015 13:33:00 +0000 (09:33 -0400)]
tipc: drop tunneled packet duplicates at reception
In commit 8b4ed8634f8b3f9aacfc42b4a872d30c36b9e255
("tipc: eliminate race condition at dual link establishment")
we introduced a parallel link synchronization mechanism that
guarentees sequential delivery even for users switching from
an old to a newly established link. The new mechanism makes it
unnecessary to deliver the tunneled duplicate packets back to
the old link, as we are currently doing. It is now sufficient
to use the last tunneled packet's inner sequence number as
synchronization point between the two parallel links, whereafter
it can be dropped.
In this commit, we drop the duplicate packets arriving on the new
link, after updating the synchronization point at each new arrival.
Although it would now have been sufficient for the other endpoint
to only tunnel the last packet in its send queue, and not the
entire queue, we must still do this to maintain compatibility
with older nodes.
This commit makes it possible to get rid if some complex
interaction between the two parallel links.
Reviewed-by: Ying Xue <ying.xue@windriver.com> Signed-off-by: Jon Maloy <jon.maloy@ericsson.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Enabled when the device supports KEEP FCS and IGNORE FCS.
When the flag is set, pass all received frames up the stack,
even ones with invalid FCS, controlled by ethtool.
Signed-off-by: Muhammad Mahajna <muhammadm@mellanox.com> Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Enabled when device supports KEEP FCS. When the flag is set, Ethernet FCS
is appended to the end of the frame, controlled by ethtool.
Signed-off-by: Muhammad Mahajna <muhammadm@mellanox.com> Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for the interface ethtool identify feature.
Make the physical port LED to blink with green and yellow colors.
The device handles the LED blink by itself (synchrous use of
set_phys_id), by returning 0 to ETHTOOL_ID_ACTIVE command.
Signed-off-by: Eyal Grossman <eyalgr@mellanox.com> Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
A new capability bit was introduced in the past to to differ devices
using the QoS ETS feature. The old was deprecated since then.
If driver sees device which set only the old capabilty, it will print
warning to user suggesting to upgrade the FW.
Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Support granular QoS per VF, by implementing the ndo_set_vf_rate.
Enforce a rate limit per VF when called, and enabled only for VFs in
VST mode with user priority supported by the device.
We don't enforce VFs to be in VST mode at the moment of configuration,
but rather save the given rate limit and enforce it when the VF is
moved to VST with user priority which is supported (currently 0).
VST<->VGT or VST qos value state changes are disallowed when a rate
limit is configured. Minimum BW share is not supported yet.
Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net/mlx4: Added qos_vport QP configuration in VST mode
Granular QoS per VF feature introduce a new QP field, qos_vport.
PF administrator can connect VF QPs to a certain QoS Vport, to
inherit its proporties. Connecting QPs to the default QoS Vport
(defined as 0) is always allowed, even when there are no allocated VPPs.
At this point, only the default vport is connected to QPs.
Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Query the port availible VPPs and allocates those on all supported
priorities in an equal share. Allocation is done only in SRIOV mode,
when the feature is supported by the device and port type is Ethernet.
Allocation currently is done only on the default priority 0.
Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Add the SET_VPORT_QOS device command, which is ntended for virtual
granular QoS configuration per VF in SRIOV mode. The SET_VPORT_QOS
command sets and queries QoS parameters of a VPort. Each priority
allowed for a VPort is assigned with a share of the BW, and a BW
limitation. QoS parameters can be modified at any time, but must be
initialized before any QP is associated with the VPort.
Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Implements device ALLOCATE_VPP command, to be used for granular QoS
configuration of VFs by the PF device. Defines and queries the amount
of VPPs assigned to each port, and the amount of VPPs assigned to each
priority of each port. Once the total VPPs are split between the priorities
of a port, they may be assigned with a share of the BW or a rate limit.
Split into two functions (get/set) whoch are supplied with
mlx4_alloc_vpp_context and physical port number.
Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net/mlx4: New file for QoS related firmware commands
Create two new files fw_qos.h and fw_qos.c in mlx4_core module.
It gathers all relevant QoS firmware related commands etc, thus improving
encapsulation of the mlx4_core module. For now it contains the QoS existing
commands: mlx4_SET_PORT_SCHEDULER and mlx4_SET_PORT_PRIO2TC.
Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net/mlx4: Aesthetic code changes in multi_func_init
Previous vf_oper and vf_admin code created very long lines, making it hard
to read the code. Added relevant in-struct pointers to reduce code
complexity and avoid code lines spread over 80 lines. Same logic is preserved.
Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net/mlx4_en: Change loopback only upon feature change
Currently any change of netdev features results in a call to
mlx4_en_update_loopback_state(). Those calls are unnecessary,
and should be called only upon loopback feature change.
Also moved some of the logic into mlx4_en_update_loopback_state().
Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
net/mlx4: Add RSS support for fragmented IP datagrams
Enable RSS support for fragmented IP packets, when device supports it.
Until now, fragmented IP packets were directed only to the default_qpn.
Since IP fragments (datagram) have no upper protocols (L3 IP packets),
hash is performed on 3-tuple - dst MAC, source IP and dest IP. The HW
makes sure that this holds for the 1st fragment too, so all fragments
go to the same QP.
Signed-off-by: Ido Shamay <idos@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
The TCP conflicts were overlapping changes. In 'net' we added a
READ_ONCE() to the socket cached RX route read, whilst in 'net-next'
Eric Dumazet touched the surrounding code dealing with how mini
sockets are handled.
With USB, it's a case of the same bug fix first going into net-next
and then I cherry picked it back into net.
Signed-off-by: David S. Miller <davem@davemloft.net>
Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dma
Pull dmaengine fixes from Vinod Koul:
"This time we have addition of caps for jz4740 which fixes intentional
warning at boot. Then we have memory leak issues in drivers using
virt-dma by Peter on few drive"
* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: moxart-dma: Fix memory leak when stopping a running transfer
dmaengine: bcm2835-dma: Fix memory leak when stopping a running transfer
dmaengine: omap-dma: Fix memory leak when terminating running transfer
dmaengine: edma: fix memory leak when terminating running transfers
dmaengine: jz4740: Define capabilities
1) Fix use-after-free with mac80211 RX A-MPDU reorder timer, from
Johannes Berg.
2) iwlwifi leaks memory every module load/unload cycles, fix from Larry
Finger.
3) Need to use for_each_netdev_safe() in rtnl_group_changelink()
otherwise we can crash, from WANG Cong.
4) mlx4 driver does register_netdev() too early in the probe sequence,
from Ido Shamay.
5) Don't allow router discovery hop limit to decrease the interface's
hop limit, from D.S. Ljungmark.
6) tx_packets and tx_bytes improperly accounted for certain classes of
USB network devices, fix from Ben Hutchings.
7) ip{6}mr_rules_init() mistakenly use plain kfree to release the ipmr
tables in the error path, they must instead use ip{6}mr_free_table().
Fix from WANG Cong.
8) cxgb4 doesn't properly quiesce all RX activity before unregistering
the netdevice. Fix from Hariprasad Shenai.
9) Fix hash corruptions in ipvlan driver, from Jiri Benc.
10) nla_memcpy(), like a real memcpy, should fully initialize the
destination buffer, even if the source attribute is smaller. Fix
from Jiri Benc.
11) Fix wrong error code returned from iucv_sock_sendmsg(). We should
use whatever sock_alloc_send_skb() put into 'err'. From Eugene
Crosser.
12) Fix slab object leak on module unload in TIPC, from Ying Xue.
13) Need a READ_ONCE() when reading the cached RX socket route in
tcp_v{4,6}_early_demux(). From Michal Kubecek.
14) Still too many problems with TPC support in the ath9k driver, so
disable it for now. From Felix Fietkau.
15) When in AP mode the rtlwifi driver can leak DMA mappings, fix from
Larry Finger.
16) Missing kzalloc() failure check in gs_usb CAN driver, from Colin Ian
King.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (52 commits)
cxgb4: Fix to dump devlog, even if FW is crashed
cxgb4: Firmware macro changes for fw verison 1.13.32.0
bnx2x: Fix kdump when iommu=on
bnx2x: Fix kdump on 4-port device
mac80211: fix RX A-MPDU session reorder timer deletion
MAINTAINERS: Update Intel Wired Ethernet Driver info
tipc: fix a slab object leak
net/usb/r8152: add device id for Lenovo TP USB 3.0 Ethernet
af_iucv: fix AF_IUCV sendmsg() errno
openvswitch: Return vport module ref before destruction
netlink: pad nla_memcpy dest buffer with zeroes
bonding: Bonding Overriding Configuration logic restored.
ipvlan: fix check for IP addresses in control path
ipvlan: do not use rcu operations for address list
ipvlan: protect against concurrent link removal
ipvlan: fix addr hash list corruption
net: fec: setup right value for mdio hold time
net: tcp6: fix double call of tcp_v6_fill_cb()
cxgb4vf: Fix sparse warnings
netns: don't clear nsid too early on removal
...
David S. Miller [Thu, 2 Apr 2015 18:05:02 +0000 (14:05 -0400)]
Merge branch 'netdev_iflink_remove'
Nicolas Dichtel says:
====================
Remove iflink field from the net_device structure
The first goal of this series was to advertise the veth peer via the IFLA_LINK
attribute, but iflink was not ready for network namespaces.
The iflink of an interface should be set to its ifindex for a physical interface
and to another value (0 if not relevant) for a virtual interface.
This was not the case for some interfaces, like vxlan, bond, or bridge for
example.
There is also a risk, if the targeted interface moves to another netns, that the
ifindex changes without updating corresponding iflink fields (eg. vlan).
Moving the management of this property into virtual interface drivers allows to
better handle this last case because most of virtual interface drivers have a
pointer to the link netdevice.
Anyway, dev->iflink value was always a copy of some internal data of the virtual
interface driver, thus let's use these internal data directly.
So, this series removes the iflink field and let the drivers manage it.
Only the last patch was present in the v1, but I fully rework it.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Nicolas Dichtel [Thu, 2 Apr 2015 15:07:11 +0000 (17:07 +0200)]
veth: set iflink to the peer veth
Now that the peer netns is advertised in rtnl messages, we can set this property
so that IFLA_LINK will advertise the peer ifindex. It allows the userland to get
the full veth configuration.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Nicolas Dichtel [Thu, 2 Apr 2015 15:07:10 +0000 (17:07 +0200)]
dev: set iflink to 0 for virtual interfaces
Virtual interfaces are supposed to set an iflink value != of their ifindex.
It was not the case for some of them, like vxlan, bond or bridge.
Let's set iflink to 0 when dev->rtnl_link_ops is set.
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Nicolas Dichtel [Thu, 2 Apr 2015 15:07:08 +0000 (17:07 +0200)]
dsa: implement ndo_get_iflink
Don't use dev->iflink anymore.
CC: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Nicolas Dichtel [Thu, 2 Apr 2015 15:07:06 +0000 (17:07 +0200)]
ipvlan: implement ndo_get_iflink
Don't use dev->iflink anymore.
CC: Mahesh Bandewar <maheshb@google.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Nicolas Dichtel [Thu, 2 Apr 2015 15:07:02 +0000 (17:07 +0200)]
ipip,gre,vti,sit: implement ndo_get_iflink
Don't use dev->iflink anymore.
CC: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Nicolas Dichtel [Thu, 2 Apr 2015 15:07:01 +0000 (17:07 +0200)]
ip6tnl,gre6,vti6: implement ndo_get_iflink
Don't use dev->iflink anymore.
CC: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Nicolas Dichtel [Thu, 2 Apr 2015 15:07:00 +0000 (17:07 +0200)]
dev: introduce dev_get_iflink()
The goal of this patch is to prepare the removal of the iflink field. It
introduces a new ndo function, which will be implemented by virtual interfaces.
There is no functional change into this patch. All readers of iflink field
now call dev_get_iflink().
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Thu, 2 Apr 2015 02:55:41 +0000 (22:55 -0400)]
Merge branch 'dsa-next'
Andrew Lunn says:
====================
DSA Mavell drivers refactoring and cleanup
v1->v2:
* Add missing signed-of-by: For patches authored by Guenter Roeck.
* Add Reviewed by from Guenter Roack to patch #5.
This is a collection of patches again net-next from today containing
refactoring and consolidate of code, cleanups and using #define's to
replace register numbers.
Patch #1 Swaps the 6131 driver to use the consolidated setup code.
Patch #2 Moves the Switch IDs used during probe into a central
location. We need these later so that we can differentiate
the different features the devices have.
Patch #3 Makes the 6131 driver set the number of ports in the private
state structure. It then uses this, rather than hard coded
maximum number of ports.
Patch #4 Similar to Patch #3, but for the 6123_61_65 driver.
Patch #5 Similar to Patch #3, and #4, but for all the remaining
drivers. This greatly increases the similarity of the code
between drivers, allow further patches to consolidate the
duplicated code.
Patch #6 Consolidate the switch reset code, which has two minor
variants. Removes around 35 lines per driver.
Patch #7 Moves phy page access functions out of the 6352 driver into
the shared code. Currently only the 6352 driver uses this,
but it is likely other devices will come along wanting this
functionality.
Patch #8 Consolidates the code used to access phy registers. Removes
around 40 lines of code per driver.
Patch #9 Fixes missing mutex locking in the EEE code, and refactors
the code a bit to make it more understandable with respect to
locks.
Patch #10 Consolidates reading statistics. This is very similar code
for all devices, but the number of available statistics
differ, which can be determined from the product ID. Removes
around 65 lines per driver.
Patch #11 Add #defines for registers, and bits within the
registers. For the moment, this is limited to the shared
code. The individual drivers will be converted once the
remaining duplicated code is consolidated
Patch #12 Fix broken statistic counters on the 6172. The 6352 family
requires the port number is poked into a different set of
bits in the register compared to other devices.
Many thanks to Guenter Roeck for repeatedly reviewing the patches and
testing them on his hardware.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Thu, 2 Apr 2015 02:06:40 +0000 (04:06 +0200)]
net: dsa: mv88e6xxx: Fix stats counters for 6352 family
The statistic counters for the mv88e6172 never worked. This device is
a member of the 6352 family of chips, which has a slightly different
layout of the register used for capturing statistics. Add support for
detecting this family and poking the port in the right place in the
register.
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Thu, 2 Apr 2015 02:06:39 +0000 (04:06 +0200)]
net: dsa: Use mnemonics rather than register numbers
Rather than refer to registers by number, define mnemonics. Also
define mnemonics for the commonly used bits within the registers.
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Thu, 2 Apr 2015 02:06:38 +0000 (04:06 +0200)]
net: dsa: Consolidate getting the statistics
Reading the statistics from the hardware is the same for all
chips. What differs is the number of available statistics. Have just
one copy of the code in the shared mv88e6xxx.
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Thu, 2 Apr 2015 02:06:37 +0000 (04:06 +0200)]
net: dsa: mv88e6xxx: Add missing mutex's in EEE operations.
The phy_mutex should be held while reading and writing to the phy.
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Thu, 2 Apr 2015 02:06:36 +0000 (04:06 +0200)]
net: dsa: Consolidate phy read and write functions
Move the common code for reading and writing phy registers into the
shared mv88e6xxx.
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Thu, 2 Apr 2015 02:06:35 +0000 (04:06 +0200)]
net: dsa: Move phy page access functions into shared code
These functions could in future be used by other drivers. Move them
into the shared area.
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Thu, 2 Apr 2015 02:06:34 +0000 (04:06 +0200)]
net: dsa: Centralize Marvell switch reset
Marvell switches are all reset in nearly the same way. The only
difference is if the PPU should be enabled or not. Move this
code into the shared mv88x6xxx.c.
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn [Thu, 2 Apr 2015 02:06:33 +0000 (04:06 +0200)]
net: dsa: Consistently set and use ps->num_ports
As a step towards consolidating code, consistently set the
number of ports in the private state structure, and make use of it in
loops.
Signed-off-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: David S. Miller <davem@davemloft.net>
net: dsa: mv88e6123_61_65: Determine and use number of switch ports
Determine and use number of switch ports from chip ID instead of always
using the maximum, and return error when an attempt is made to access a
non-existing port.
Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
net: dsa: mv88e6131: Determine and use number of switch ports
Determine and use number of switch ports from chip ID instead of always
using the maximum, and return error when an attempt is made to access a
non-existing port.
Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
net: dsa: mv88e6xxx: Move switch product IDs into common include file
This will let us use the switch product IDs in the common source code.
Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
net: dsa: mv88e6131: Use common initialization functions
Common initialization functions will be needed to enable
HW bridging support.
Signed-off-by: Guenter Roeck <linux@roeck-us.net> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
projects / linux-beck.git / log