Steven J. Hill [Thu, 10 Apr 2014 19:06:17 +0000 (14:06 -0500)]
MIPS: mm: Fix broken microMIPS kernel regression.
Commit f4ae17aa0f2122b52f642985b46210a1f2eceb0a [MIPS: mm: Use scratch for
PGD when !CONFIG_MIPS_PGD_C0_CONTEXT] broke microMIPS kernel builds. This
patch refactors that code similar to what was done for the 'clear_page'
and 'copy_page' functions.
Signed-off-by: Steven J. Hill <Steven.Hill@imgtec.com> Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/6744/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
MIPS: Add new AUDIT_ARCH token for the N32 ABI on MIPS64
A MIPS64 kernel may support ELF files for all 3 MIPS ABIs
(O32, N32, N64). Furthermore, the AUDIT_ARCH_MIPS{,EL}64 token
does not provide enough information about the ABI for the 64-bit
process. As a result of which, userland needs to use complex
seccomp filters to decide whether a syscall belongs to the o32 or n32
or n64 ABI. Therefore, a new arch token for MIPS64/n32 is added so it
can be used by seccomp to explicitely set syscall filters for this ABI.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> Acked-by: Eric Paris <eparis@redhat.com> Acked-by: Paul Moore <pmoore@redhat.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: linux-mips@linux-mips.org Link: http://sourceforge.net/p/libseccomp/mailman/message/32239040/
Patchwork: https://patchwork.linux-mips.org/patch/6818/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Move microMIPS32_to_MIPS32() to a separate file which only gets built
for mipsMIPS configurations; for other configurations the optimizer
eleminates calls to microMIPS32_to_MIPS32().
MIPS: math-emu: Switch to using the MIPS rounding modes.
Previously math-emu was using the IEEE-754 constants internally. These
were differing by having the constants for rounding to +/- infinity
switched, so a conversion was necessary. This would be entirely
avoidable if the MIPS constants were used throughout, so get rid of
the bloat.
mm_isBranchInstr() did reside in the math emu code even though it logically
is separate and also is used outside the math emu code. In addition GCC 4.9.0
leaves the following unnnecessarily bloated function body for a non-microMIPS
configuration:
which stores arguments that are never going to be used on the stack frame.
Move mm_isBranchInstr() from cp1emu.c to branch.c, then split mm_isBranchInstr()
into a __mm_isBranchInstr() core and a mm_isBranchInstr() wrapper inline function
which only invokes __mm_isBranchInstr() on microMIPS configurations.
This shaves off 112 bytes off the kernel and improves code flow a bit.
o Only define variables in the outermost block
o One empty line at most
o Format comments as per CodingStyle
o Update FSF address in licensing term comment
o Spell FPU and MIPS in all capitals.
o Remove ####-type of lines in comments.
o Try to make things a bit most consistent between sp_*.c / dp_*.c files.
MIPS: math-emu: Move various objects into an ar library.
ieee754d.o contains only debug code and dp_sqrt.o and sp_sqrt.o contain
code which for MIPS I/II/III systems we don't want to link. Again the
savings can be considerable for some systems:
LONG_LONG_MAX is a symbol defined in <limits.h> which may not be available
so better rely on something provided by a kernel header. While at it,
turn these function-like macros into inline functions.
Most of these tests should be runtime tests. This also finally means
that on a MIPS III systems MIPS IV opcodes are going to result in an
exception as they're supposed to.
Aaro Koskinen [Thu, 3 Apr 2014 19:24:01 +0000 (22:24 +0300)]
MIPS/loongson2_cpufreq: Fix CPU clock rate setting
Loongson2 has been using (incorrectly) kHz for cpu_clk rate. This has
been unnoticed, as loongson2_cpufreq was the only place where the rate
was set/get. After commit 652ed95d5fa6074b3c4ea245deb0691f1acb6656
(cpufreq: introduce cpufreq_generic_get() routine) things however broke,
and now loops_per_jiffy adjustments are incorrect (1000 times too long).
The patch fixes this by changing cpu_clk rate to Hz.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: stable@vger.kernel.org Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: cpufreq@vger.kernel.org Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Patchwork: https://patchwork.linux-mips.org/patch/6678/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Bolle [Thu, 3 Apr 2014 09:10:20 +0000 (11:10 +0200)]
MIPS: Loongson: No need to select GENERIC_HARDIRQS_NO__DO_IRQ
Commit 0e476d91244e ("MIPS: Loongson: Add Loongson-3 Kconfig options")
added "select GENERIC_HARDIRQS_NO__DO_IRQ". But the Kconfig symbol
GENERIC_HARDIRQS_NO__DO_IRQ was already removed in v2.6.38, so that
select is a nop. Drop it.
This change reverts most of commit 60724ca59eda766a30be57aec6b49bc3e2bead91 [MIPS: IP checksums: Remove
unncessary .set pseudos] that introduced warnings with the
CPU_DADDI_WORKAROUNDS option set:
arch/mips/lib/csum_partial.S: Assembler messages:
arch/mips/lib/csum_partial.S:467: Warning: used $3 with ".set at=$3"
arch/mips/lib/csum_partial.S:467: Warning: used $3 with ".set at=$3"
arch/mips/lib/csum_partial.S:467: Warning: used $3 with ".set at=$3"
arch/mips/lib/csum_partial.S:467: Warning: used $3 with ".set at=$3"
arch/mips/lib/csum_partial.S:467: Warning: used $3 with ".set at=$3"
arch/mips/lib/csum_partial.S:467: Warning: used $3 with ".set at=$3"
arch/mips/lib/csum_partial.S:467: Warning: used $3 with ".set at=$3"
arch/mips/lib/csum_partial.S:467: Warning: used $3 with ".set at=$3"
arch/mips/lib/csum_partial.S:467: Warning: used $3 with ".set at=$3"
arch/mips/lib/csum_partial.S:467: Warning: used $3 with ".set at=$3"
[...]
arch/mips/lib/csum_partial.S:577: Warning: used $3 with ".set at=$3"
arch/mips/lib/csum_partial.S:577: Warning: used $3 with ".set at=$3"
arch/mips/lib/csum_partial.S:577: Warning: used $3 with ".set at=$3"
arch/mips/lib/csum_partial.S:601: Warning: used $3 with ".set at=$3"
arch/mips/lib/csum_partial.S:601: Warning: used $3 with ".set at=$3"
arch/mips/lib/csum_partial.S:601: Warning: used $3 with ".set at=$3"
arch/mips/lib/csum_partial.S:601: Warning: used $3 with ".set at=$3"
[and so on, and so on...]
The warnings are benign and good code is produced regardless because no
macros that'd use the assembler's temporary register are involved, however
the `.set noat' directives removed by the commit referred are crucial to
guarantee this is still going to be the case after any changes in the
future. Therefore they need to be brought back to place which this
change does.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/6686/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This corrects assembler warnings and broken code generated in
__strncpy_from_user_asm:
arch/mips/lib/strncpy_user.S: Assembler messages:
arch/mips/lib/strncpy_user.S:52: Warning: Macro instruction expanded into
multiple instructions in a branch delay slot
with the CPU_DADDI_WORKAROUNDS option set. The function schedules delay
slots manually where there is really no need to as GAS is happy to do it
all itself, so undo it all and remove `.set noreorder'.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/6685/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Consequently the function loops indefinitely, showing up prominently as a
hang in the delay loop calibration at bootstrap.
This change corrects the problem by forcing the immediate 1 into a
register while keeping code produced identical where CPU_DADDI_WORKAROUNDS
is disabled.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/6669/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Commit 231a35d37293ab88d325a9cb94e5474c156282c0 [[MIPS] RM: Collected
changes] broke DECstation support by introducing an incompatible copy of
arch/mips/dec/prom/call_o32.S in arch/mips/fw/lib/, built unconditionally.
The copy happens to land earlier of the two among the modules used in the
link and is therefore chosen for the DECstation rather than the intended
original. As a result random kernel data is corrupted because a pointer
to the "%s" formatted output template is used as a temporary stack pointer
rather than being passed down to prom_printf. This also explains why
prom_printf still works, up to a point -- the next argument is the actual
string to output so it works just fine as the output template until enough
kernel data has been corrupted to cause a crash.
This change adjusts the modified wrapper in arch/mips/fw/lib/call_o32.S to
let callers request no stack switching by passing a null temporary stack
pointer in $a1, reworks the DECstation callers to work with the updated
interface and removes the old copy from arch/mips/dec/prom/call_o32.S. A
few minor readability adjustments are included as well, most importantly
O32_SZREG is now used throughout where applicable rather than hardcoded
multiplies of 4 and $fp is used to access the argument save area as a more
usual register to operate the stack with rather than $s0.
Finally an update is made to the temporary stack space used by the SNI
platform to guarantee 8-byte alignment as per o32 requirements.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/6668/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
MIPS: DEC: Bus error handler <asm/cpu-type.h> fixes
Commit 69f24d1784b631b81a54eb57c49bf46536dd2382 [MIPS: Optimize
current_cpu_type() for better code.] missed an update for two DECstation
bus error support files that now do not build, this is a fix.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/6667/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Add mailing list and patchwork URL so patches now have a defined path.
Also add myself as a TURBOchannel maintainer. However Maciej is going
to the the resident TURBOchannel guru.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: "Maciej W. Rozycki" <macro@linux-mips.org>
Aaro Koskinen [Thu, 3 Apr 2014 19:24:01 +0000 (22:24 +0300)]
MIPS/loongson2_cpufreq: Fix CPU clock rate setting
Loongson2 has been using (incorrectly) kHz for cpu_clk rate. This has
been unnoticed, as loongson2_cpufreq was the only place where the rate
was set/get. After commit 652ed95d5fa6074b3c4ea245deb0691f1acb6656
(cpufreq: introduce cpufreq_generic_get() routine) things however broke,
and now loops_per_jiffy adjustments are incorrect (1000 times too long).
The patch fixes this by changing cpu_clk rate to Hz.
Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi> Cc: stable@vger.kernel.org Cc: Rafael J. Wysocki <rjw@rjwysocki.net> Cc: Viresh Kumar <viresh.kumar@linaro.org> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: cpufreq@vger.kernel.org Cc: Aaro Koskinen <aaro.koskinen@iki.fi>
Patchwork: https://patchwork.linux-mips.org/patch/6678/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Paul Bolle [Thu, 3 Apr 2014 09:10:20 +0000 (11:10 +0200)]
MIPS: Loongson: No need to select GENERIC_HARDIRQS_NO__DO_IRQ
Commit 0e476d91244e ("MIPS: Loongson: Add Loongson-3 Kconfig options")
added "select GENERIC_HARDIRQS_NO__DO_IRQ". But the Kconfig symbol
GENERIC_HARDIRQS_NO__DO_IRQ was already removed in v2.6.38, so that
select is a nop. Drop it.
This change reverts most of commit 60724ca59eda766a30be57aec6b49bc3e2bead91 [MIPS: IP checksums: Remove
unncessary .set pseudos] that introduced warnings with the
CPU_DADDI_WORKAROUNDS option set:
arch/mips/lib/csum_partial.S: Assembler messages:
arch/mips/lib/csum_partial.S:467: Warning: used $3 with ".set at=$3"
arch/mips/lib/csum_partial.S:467: Warning: used $3 with ".set at=$3"
arch/mips/lib/csum_partial.S:467: Warning: used $3 with ".set at=$3"
arch/mips/lib/csum_partial.S:467: Warning: used $3 with ".set at=$3"
arch/mips/lib/csum_partial.S:467: Warning: used $3 with ".set at=$3"
arch/mips/lib/csum_partial.S:467: Warning: used $3 with ".set at=$3"
arch/mips/lib/csum_partial.S:467: Warning: used $3 with ".set at=$3"
arch/mips/lib/csum_partial.S:467: Warning: used $3 with ".set at=$3"
arch/mips/lib/csum_partial.S:467: Warning: used $3 with ".set at=$3"
arch/mips/lib/csum_partial.S:467: Warning: used $3 with ".set at=$3"
[...]
arch/mips/lib/csum_partial.S:577: Warning: used $3 with ".set at=$3"
arch/mips/lib/csum_partial.S:577: Warning: used $3 with ".set at=$3"
arch/mips/lib/csum_partial.S:577: Warning: used $3 with ".set at=$3"
arch/mips/lib/csum_partial.S:601: Warning: used $3 with ".set at=$3"
arch/mips/lib/csum_partial.S:601: Warning: used $3 with ".set at=$3"
arch/mips/lib/csum_partial.S:601: Warning: used $3 with ".set at=$3"
arch/mips/lib/csum_partial.S:601: Warning: used $3 with ".set at=$3"
[and so on, and so on...]
The warnings are benign and good code is produced regardless because no
macros that'd use the assembler's temporary register are involved, however
the `.set noat' directives removed by the commit referred are crucial to
guarantee this is still going to be the case after any changes in the
future. Therefore they need to be brought back to place which this
change does.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/6686/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This corrects assembler warnings and broken code generated in
__strncpy_from_user_asm:
arch/mips/lib/strncpy_user.S: Assembler messages:
arch/mips/lib/strncpy_user.S:52: Warning: Macro instruction expanded into
multiple instructions in a branch delay slot
with the CPU_DADDI_WORKAROUNDS option set. The function schedules delay
slots manually where there is really no need to as GAS is happy to do it
all itself, so undo it all and remove `.set noreorder'.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/6685/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Consequently the function loops indefinitely, showing up prominently as a
hang in the delay loop calibration at bootstrap.
This change corrects the problem by forcing the immediate 1 into a
register while keeping code produced identical where CPU_DADDI_WORKAROUNDS
is disabled.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/6669/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Commit 231a35d37293ab88d325a9cb94e5474c156282c0 [[MIPS] RM: Collected
changes] broke DECstation support by introducing an incompatible copy of
arch/mips/dec/prom/call_o32.S in arch/mips/fw/lib/, built unconditionally.
The copy happens to land earlier of the two among the modules used in the
link and is therefore chosen for the DECstation rather than the intended
original. As a result random kernel data is corrupted because a pointer
to the "%s" formatted output template is used as a temporary stack pointer
rather than being passed down to prom_printf. This also explains why
prom_printf still works, up to a point -- the next argument is the actual
string to output so it works just fine as the output template until enough
kernel data has been corrupted to cause a crash.
This change adjusts the modified wrapper in arch/mips/fw/lib/call_o32.S to
let callers request no stack switching by passing a null temporary stack
pointer in $a1, reworks the DECstation callers to work with the updated
interface and removes the old copy from arch/mips/dec/prom/call_o32.S. A
few minor readability adjustments are included as well, most importantly
O32_SZREG is now used throughout where applicable rather than hardcoded
multiplies of 4 and $fp is used to access the argument save area as a more
usual register to operate the stack with rather than $s0.
Finally an update is made to the temporary stack space used by the SNI
platform to guarantee 8-byte alignment as per o32 requirements.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/6668/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
MIPS: DEC: Bus error handler <asm/cpu-type.h> fixes
Commit 69f24d1784b631b81a54eb57c49bf46536dd2382 [MIPS: Optimize
current_cpu_type() for better code.] missed an update for two DECstation
bus error support files that now do not build, this is a fix.
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/6667/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Add mailing list and patchwork URL so patches now have a defined path.
Also add myself as a TURBOchannel maintainer. However Maciej is going
to the the resident TURBOchannel guru.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Acked-by: "Maciej W. Rozycki" <macro@linux-mips.org>
Linus Torvalds [Fri, 9 May 2014 19:24:20 +0000 (12:24 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Peter Anvin:
"A somewhat unpleasantly large collection of small fixes. The big ones
are the __visible tree sweep and a fix for 'earlyprintk=efi,keep'. It
was using __init functions with predictably suboptimal results.
Another key fix is a build fix which would produce output that simply
would not decompress correctly in some configuration, due to the
existing Makefiles picking up an unfortunate local label and mistaking
it for the global symbol _end.
Additional fixes include the handling of 64-bit numbers when setting
the vdso data page (a latent bug which became manifest when i386
started exporting a vdso with time functions), a fix to the new MSR
manipulation accessors which would cause features to not get properly
unblocked, a build fix for 32-bit userland, and a few new platform
quirks"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86, vdso, time: Cast tv_nsec to u64 for proper shifting in update_vsyscall()
x86: Fix typo in MSR_IA32_MISC_ENABLE_LIMIT_CPUID macro
x86: Fix typo preventing msr_set/clear_bit from having an effect
x86/intel: Add quirk to disable HPET for the Baytrail platform
x86/hpet: Make boot_hpet_disable extern
x86-64, build: Fix stack protector Makefile breakage with 32-bit userland
x86/reboot: Add reboot quirk for Certec BPC600
asmlinkage: Add explicit __visible to drivers/*, lib/*, kernel/*
asmlinkage, x86: Add explicit __visible to arch/x86/*
asmlinkage: Revert "lto: Make asmlinkage __visible"
x86, build: Don't get confused by local symbols
x86/efi: earlyprintk=efi,keep fix
Boris Ostrovsky [Fri, 9 May 2014 15:11:27 +0000 (11:11 -0400)]
x86, vdso, time: Cast tv_nsec to u64 for proper shifting in update_vsyscall()
With tk->wall_to_monotonic.tv_nsec being a 32-bit value on 32-bit
systems, (tk->wall_to_monotonic.tv_nsec << tk->shift) in update_vsyscall()
may lose upper bits or, worse, add them since compiler will do this:
(u64)(tk->wall_to_monotonic.tv_nsec << tk->shift)
instead of
((u64)tk->wall_to_monotonic.tv_nsec << tk->shift)
So if, for example, tv_nsec is 0x800000 and shift is 8 we will end up
with 0xffffffff80000000 instead of 0x80000000. And then we are stuck in
the subsequent 'while' loop.
Andres Freund [Fri, 9 May 2014 01:29:16 +0000 (03:29 +0200)]
x86: Fix typo preventing msr_set/clear_bit from having an effect
Due to a typo the msr accessor function introduced in 22085a66c2fab6cf9b9393c056a3600a6b4735de didn't have any lasting
effects because they accidentally wrote the old value back.
After c0a639ad0bc6b178b46996bd1f821a04643e2bde this at the very least
this causes cpuid limits not to be lifted on some cpus leading to
missing capabilities for those.
Linus Torvalds [Fri, 9 May 2014 02:20:45 +0000 (19:20 -0700)]
Merge tag 'xfs-for-linus-3.15-rc5' of git://oss.sgi.com/xfs/xfs
Pull xfs fixes from Dave Chinner:
"The main fix is adding support for default ACLs on O_TMPFILE opened
inodes to bring XFS into line with other filesystems. Metadata CRCs
are now also considered well enough tested to be fully supported, so
we're removing the shouty warnings issued at mount time for
filesystems with that format. And there's transaction block
reservation overrun fix.
Summary:
- fix a remote attribute size calculation bug that leads to a
transaction overrun
- add default ACLs to O_TMPFILE files
- Remove the EXPERIMENTAL tag from filesystems with metadata CRC
support"
* tag 'xfs-for-linus-3.15-rc5' of git://oss.sgi.com/xfs/xfs:
xfs: remote attribute overwrite causes transaction overrun
xfs: initialize default acls for ->tmpfile()
xfs: fully support v5 format filesystems
Linus Torvalds [Thu, 8 May 2014 21:17:13 +0000 (14:17 -0700)]
Merge tag 'trace-fixes-v3.15-rc4-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"This contains two fixes.
The first is a long standing bug that causes bogus data to show up in
the refcnt field of the module_refcnt tracepoint. It was introduced
by a merge conflict resolution back in 2.6.35-rc days.
The result should be 'refcnt = incs - decs', but instead it did
'refcnt = incs + decs'.
The second fix is to a bug that was introduced in this merge window
that allowed for a tracepoint funcs pointer to be used after it was
freed. Moving the location of where the probes are released solved
the problem"
* tag 'trace-fixes-v3.15-rc4-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracepoint: Fix use of tracepoint funcs after rcu free
trace: module: Maintain a valid user count
Linus Torvalds [Thu, 8 May 2014 21:06:45 +0000 (14:06 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input subsystem fixes from Dmitry Torokhov:
"Just a few fixups to various drivers"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: elantech - fix touchpad initialization on Gigabyte U2442
Input: tca8418 - fix loading this driver as a module from a device tree
Input: bma150 - extend chip detection for bma180
Input: atkbd - fix keyboard not working on some LG laptops
Input: synaptics - add min/max quirk for ThinkPad Edge E431
Linus Torvalds [Thu, 8 May 2014 20:51:53 +0000 (13:51 -0700)]
Merge tag 'sound-3.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A bunch of small fixes for USB-audio and HD-audio, where most of them
are for regressions: USB-audio PM fixes, ratelimit annoyance fix, HDMI
offline state fix, and a couple of device-specific quirks"
* tag 'sound-3.15-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda - hdmi: Set converter channel count even without sink
ALSA: usb-audio: work around corrupted TEAC UD-H01 feedback data
ALSA: usb-audio: Fix deadlocks at resuming
ALSA: usb-audio: Save mixer status only once at suspend
ALSA: usb-audio: Prevent printk ratelimiting from spamming kernel log while DEBUG not defined
ALSA: hda - add headset mic detect quirk for a Dell laptop
Linus Torvalds [Thu, 8 May 2014 19:41:14 +0000 (12:41 -0700)]
Merge tag 'mfd-mmc-fixes-3.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd
Pull mmc/rtsx revert from Lee Jones.
* tag 'mfd-mmc-fixes-3.15-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd:
mmc: rtsx: Revert "mmc: rtsx: add support for pre_req and post_req"
tracepoint: Fix use of tracepoint funcs after rcu free
Commit de7b2973903c "tracepoint: Use struct pointer instead of name hash
for reg/unreg tracepoints" introduces a use after free by calling
release_probes on the old struct tracepoint array before the newly
allocated array is published with rcu_assign_pointer. There is a race
window where tracepoints (RCU readers) can perform a
"use-after-grace-period-after-free", which shows up as a GPF in
stress-tests.
Romain Izard [Tue, 4 Mar 2014 09:09:39 +0000 (10:09 +0100)]
trace: module: Maintain a valid user count
The replacement of the 'count' variable by two variables 'incs' and
'decs' to resolve some race conditions during module unloading was done
in parallel with some cleanup in the trace subsystem, and was integrated
as a merge.
Unfortunately, the formula for this replacement was wrong in the tracing
code, and the refcount in the traces was not usable as a result.
Use 'count = incs - decs' to compute the user count.
commit <mmc: rtsx: add support for pre_req and post_req> did use
mutex_unlock() in tasklet, but mutex_unlock() can't be used in
tasklet(atomic context). The driver needs to use mutex to avoid
concurrency, so we can't use tasklet here, the patch need to be
removed.
The spinlock host->lock and pcr->lock may deadlock, one way to solve
the deadlock is remove host->lock in sd_isr_done_transfer(), but if
using workqueue the we can avoid using the spinlock and also avoid
the problem.
Signed-off-by: Micky Ching <micky_ching@realsil.com.cn> Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Lee Jones <lee.jones@linaro.org>
HPET on some platform has accuracy problem. Making
"boot_hpet_disable" extern so that we can runtime disable
the HPET timer by using quirk to check the platform.
Linus Torvalds [Wed, 7 May 2014 23:07:58 +0000 (16:07 -0700)]
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID fixes from Jiri Kosina:
- fix a small bug in computation of report size, which might cause some
devices (Atmel touchpad found on the Samsung Ativ 9) to reject
reports with otherwise valid contents
- a few device-ID specific quirks/additions piggy-backing on top of it
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
HID: sensor-hub: Add in quirk for sensor hub in Lenovo Ideapad Yogas
HID: add NO_INIT_REPORTS quirk for Synaptics Touch Pad V 103S
HID: core: fix computation of the report size
HID: multitouch: add support of EliteGroup 05D8 panels
Linus Torvalds [Wed, 7 May 2014 22:47:47 +0000 (15:47 -0700)]
Merge branch 'drm-radeon-mullins' of git://people.freedesktop.org/~airlied/linux
Pull radeon mullins support from Dave Airlie:
"This is support for the new AMD mullins APU, it pretty much just adds
support to the driver in the all the right places, and is pretty low
risk wrt other GPUs"
Oh well. I guess it ends up fitting under "support new hardware" for
merging late.
* 'drm-radeon-mullins' of git://people.freedesktop.org/~airlied/linux:
drm/radeon: add pci ids for Mullins
drm/radeon: add Mullins VCE support
drm/radeon: modesetting updates for Mullins.
drm/radeon: dpm updates for KV/KB
drm/radeon: add Mullins dpm support.
drm/radeon: add Mullins UVD support.
drm/radeon: update cik init for Mullins.
drm/radeon: add Mullins chip family
Linus Torvalds [Wed, 7 May 2014 22:45:13 +0000 (15:45 -0700)]
Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"radeon, i915 and nouveau fixes, all fixes for regressions or black
screens, or possible oopses"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/radeon: lower the ref * post PLL maximum
drm/radeon: check that we have a clock before PLL setup
drm/radeon: drm/radeon: add missing radeon_semaphore_free to error path
drm/radeon: Fix num_banks calculation for SI
agp: info leak in agpioc_info_wrap()
drm/gm107/gr: bump attrib cb size quite a bit
drm/nouveau: fix another lock unbalance in nouveau_crtc_page_flip
drm/nouveau/bios: fix shadowing from PROM on big-endian systems
drm/nouveau/acpi: allow non-optimus setups to load vbios from acpi
drm/radeon/dp: check for errors in dpcd reads
drm/radeon: avoid high jitter with small frac divs
drm/radeon: check buffer relocation offset
drm/radeon: use pflip irq on R600+ v2
drm/radeon/uvd: use lower clocks on old UVD to boot v2
drm/i915: don't try DP_LINK_BW_5_4 on HSW ULX
drm/i915: Sanitize the enable_ppgtt module option once
drm/i915: Break encoder->crtc link separately in intel_sanitize_crtc()
George Spelvin [Wed, 7 May 2014 21:05:52 +0000 (17:05 -0400)]
x86-64, build: Fix stack protector Makefile breakage with 32-bit userland
If you are using a 64-bit kernel with 32-bit userland, then
scripts/gcc-x86_64-has-stack-protector.sh invokes 32-bit gcc
with -mcmodel=kernel, which produces:
<stdin>:1:0: error: code model 'kernel' not supported in the 32 bit mode
and trips the "broken compiler" test at arch/x86/Makefile:120.
There are several places a fix is possible, but the following seems
cleanest. (But it's minimal; it would also be possible to factor
out a bunch of stuff from the two branches of the if.)
Dave Airlie [Tue, 6 May 2014 23:06:21 +0000 (09:06 +1000)]
Merge branch 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes
nouveau fixes.
* 'drm-nouveau-next' of git://anongit.freedesktop.org/git/nouveau/linux-2.6:
drm/gm107/gr: bump attrib cb size quite a bit
drm/nouveau: fix another lock unbalance in nouveau_crtc_page_flip
drm/nouveau/bios: fix shadowing from PROM on big-endian systems
drm/nouveau/acpi: allow non-optimus setups to load vbios from acpi
Dave Airlie [Tue, 6 May 2014 22:56:03 +0000 (08:56 +1000)]
Merge tag 'topc/core-stuff-2014-05-05' of git://anongit.freedesktop.org/drm-intel into drm-fixes
Some more i915 fixes. There's still some DP issues we are looking into,
but wanted to get these moving.
* tag 'topc/core-stuff-2014-05-05' of git://anongit.freedesktop.org/drm-intel:
drm/i915: don't try DP_LINK_BW_5_4 on HSW ULX
drm/i915: Sanitize the enable_ppgtt module option once
drm/i915: Break encoder->crtc link separately in intel_sanitize_crtc()
Dave Airlie [Tue, 6 May 2014 22:55:27 +0000 (08:55 +1000)]
Merge branch 'drm-fixes-3.15' of git://people.freedesktop.org/~deathsimple/linux into drm-fixes
this is the next pull quested for stashed up radeon fixes for 3.15. As discussed support for Mullins was separated out and will get it's own pull request. Remaining highlights are:
1. Some more patches to better handle PLL limits.
2. Making use of the PFLIP additional to the VBLANK interrupt, otherwise we sometimes miss page flip events.
3. Fix for the UVD command stream parser.
4. Fix for bootup UVD clocks on RV7xx systems.
5. Adding missing error check on dpcd reads.
6. Fixes number of banks calculation on SI.
* 'drm-fixes-3.15' of git://people.freedesktop.org/~deathsimple/linux:
drm/radeon: lower the ref * post PLL maximum
drm/radeon: check that we have a clock before PLL setup
drm/radeon: drm/radeon: add missing radeon_semaphore_free to error path
drm/radeon: Fix num_banks calculation for SI
drm/radeon/dp: check for errors in dpcd reads
drm/radeon: avoid high jitter with small frac divs
drm/radeon: check buffer relocation offset
drm/radeon: use pflip irq on R600+ v2
drm/radeon/uvd: use lower clocks on old UVD to boot v2
Linus Torvalds [Tue, 6 May 2014 20:07:41 +0000 (13:07 -0700)]
Merge branch 'akpm' (incoming from Andrew)
Merge misc fixes from Andrew Morton:
"13 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
agp: info leak in agpioc_info_wrap()
fs/affs/super.c: bugfix / double free
fanotify: fix -EOVERFLOW with large files on 64-bit
slub: use sysfs'es release mechanism for kmem_cache
revert "mm: vmscan: do not swap anon pages just because free+file is low"
autofs: fix lockref lookup
mm: filemap: update find_get_pages_tag() to deal with shadow entries
mm/compaction: make isolate_freepages start at pageblock boundary
MAINTAINERS: zswap/zbud: change maintainer email address
mm/page-writeback.c: fix divide by zero in pos_ratio_polynom
hugetlb: ensure hugepage access is denied if hugepages are not supported
slub: fix memcg_propagate_slab_attrs
drivers/rtc/rtc-pcf8523.c: fix month definition
Dan Carpenter [Tue, 6 May 2014 19:50:12 +0000 (12:50 -0700)]
agp: info leak in agpioc_info_wrap()
On 64 bit systems the agp_info struct has a 4 byte hole between
->agp_mode and ->aper_base. We need to clear it to avoid disclosing
stack information to userspace.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 842a859db26b ("affs: use ->kill_sb() to simplify ->put_super()
and failure exits of ->mount()") adds .kill_sb which frees sbi but
doesn't remove sbi free in case of parse_options error causing double
free+random crash.
Signed-off-by: Fabian Frederick <fabf@skynet.be> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: <stable@vger.kernel.org> [3.14.x] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Will Woods [Tue, 6 May 2014 19:50:10 +0000 (12:50 -0700)]
fanotify: fix -EOVERFLOW with large files on 64-bit
On 64-bit systems, O_LARGEFILE is automatically added to flags inside
the open() syscall (also openat(), blkdev_open(), etc). Userspace
therefore defines O_LARGEFILE to be 0 - you can use it, but it's a
no-op. Everything should be O_LARGEFILE by default.
But: when fanotify does create_fd() it uses dentry_open(), which skips
all that. And userspace can't set O_LARGEFILE in fanotify_init()
because it's defined to 0. So if fanotify gets an event regarding a
large file, the read() will just fail with -EOVERFLOW.
This patch adds O_LARGEFILE to fanotify_init()'s event_f_flags on 64-bit
systems, using the same test as open()/openat()/etc.
Signed-off-by: Will Woods <wwoods@redhat.com> Acked-by: Eric Paris <eparis@redhat.com> Reviewed-by: Jan Kara <jack@suse.cz> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sysfs has a release mechanism. Use that to release the kmem_cache
structure if CONFIG_SYSFS is enabled.
Only slub is changed - slab currently only supports /proc/slabinfo and
not /sys/kernel/slab/*. We talked about adding that and someone was
working on it.
[akpm@linux-foundation.org: fix CONFIG_SYSFS=n build]
[akpm@linux-foundation.org: fix CONFIG_SYSFS=n build even more] Signed-off-by: Christoph Lameter <cl@linux.com> Reported-by: Sasha Levin <sasha.levin@oracle.com> Tested-by: Sasha Levin <sasha.levin@oracle.com> Acked-by: Greg KH <greg@kroah.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Pekka Enberg <penberg@kernel.org> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Bart Van Assche <bvanassche@acm.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Johannes Weiner [Tue, 6 May 2014 19:50:07 +0000 (12:50 -0700)]
revert "mm: vmscan: do not swap anon pages just because free+file is low"
This reverts commit 0bf1457f0cfc ("mm: vmscan: do not swap anon pages
just because free+file is low") because it introduced a regression in
mostly-anonymous workloads, where reclaim would become ineffective and
trap every allocating task in direct reclaim.
The problem is that there is a runaway feedback loop in the scan balance
between file and anon, where the balance tips heavily towards a tiny
thrashing file LRU and anonymous pages are no longer being looked at.
The commit in question removed the safe guard that would detect such
situations and respond with forced anonymous reclaim.
This commit was part of a series to fix premature swapping in loads with
relatively little cache, and while it made a small difference, the cure
is obviously worse than the disease. Revert it.
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Acked-by: Rafael Aquini <aquini@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: <stable@kernel.org> [3.12+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Ian Kent [Tue, 6 May 2014 19:50:06 +0000 (12:50 -0700)]
autofs: fix lockref lookup
autofs needs to be able to see private data dentry flags for its dentrys
that are being created but not yet hashed and for its dentrys that have
been rmdir()ed but not yet freed. It needs to do this so it can block
processes in these states until a status has been returned to indicate
the given operation is complete.
It does this by keeping two lists, active and expring, of dentrys in
this state and uses ->d_release() to keep them stable while it checks
the reference count to determine if they should be used.
But with the recent lockref changes dentrys being freed sometimes don't
transition to a reference count of 0 before being freed so autofs can
occassionally use a dentry that is invalid which can lead to a panic.
Signed-off-by: Ian Kent <raven@themaw.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
1343 /*
1344 * This function is never used on a shmem/tmpfs
1345 * mapping, so a swap entry won't be found here.
1346 */
1347 BUG();
After commit 0cd6144aadd2 ("mm + fs: prepare for non-page entries in
page cache radix trees") this comment and BUG() are out of date because
exceptional entries can now appear in all mappings - as shadows of
recently evicted pages.
However, as Hugh Dickins notes,
"it is truly surprising for a PAGECACHE_TAG_WRITEBACK (and probably
any other PAGECACHE_TAG_*) to appear on an exceptional entry.
I expect it comes down to an occasional race in RCU lookup of the
radix_tree: lacking absolute synchronization, we might sometimes
catch an exceptional entry, with the tag which really belongs with
the unexceptional entry which was there an instant before."
And indeed, not only is the tree walk lockless, the tags are also read
in chunks, one radix tree node at a time. There is plenty of time for
page reclaim to swoop in and replace a page that was already looked up
as tagged with a shadow entry.
Remove the BUG() and update the comment. While reviewing all other
lookup sites for whether they properly deal with shadow entries of
evicted pages, update all the comments and fix memcg file charge moving
to not miss shmem/tmpfs swapcache pages.
Fixes: 0cd6144aadd2 ("mm + fs: prepare for non-page entries in page cache radix trees") Signed-off-by: Johannes Weiner <hannes@cmpxchg.org> Reported-by: Dave Jones <davej@redhat.com> Acked-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Vlastimil Babka [Tue, 6 May 2014 19:50:03 +0000 (12:50 -0700)]
mm/compaction: make isolate_freepages start at pageblock boundary
The compaction freepage scanner implementation in isolate_freepages()
starts by taking the current cc->free_pfn value as the first pfn. In a
for loop, it scans from this first pfn to the end of the pageblock, and
then subtracts pageblock_nr_pages from the first pfn to obtain the first
pfn for the next for loop iteration.
This means that when cc->free_pfn starts at offset X rather than being
aligned on pageblock boundary, the scanner will start at offset X in all
scanned pageblock, ignoring potentially many free pages. Currently this
can happen when
a) zone's end pfn is not pageblock aligned, or
b) through zone->compact_cached_free_pfn with CONFIG_HOLES_IN_ZONE
enabled and a hole spanning the beginning of a pageblock
This patch fixes the problem by aligning the initial pfn in
isolate_freepages() to pageblock boundary. This also permits replacing
the end-of-pageblock alignment within the for loop with a simple
pageblock_nr_pages increment.
Signed-off-by: Vlastimil Babka <vbabka@suse.cz> Reported-by: Heesub Shin <heesub.shin@samsung.com> Acked-by: Minchan Kim <minchan@kernel.org> Cc: Mel Gorman <mgorman@suse.de> Acked-by: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Christoph Lameter <cl@linux.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Dongjun Shin <d.j.shin@samsung.com> Cc: Sunghwan Yun <sunghwan.yun@samsung.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
projects / karo-tx-linux.git / log