hwmon: (pmbus/lm25066) Ignore byte writes to non-zero pages
pmbus_clear_faults() attempts to clear faults on non-existing real pages.
As a result, the command error bit in the status register is set, and faults
are not really cleared.
All byte writes to non-zero pages are requests to clear the status register
on that page. Since non-zero pages are virtual and do not exist on the chip,
there is nothing to do, and such requests have to be ignored. This fixes
above problem.
Linus Torvalds [Thu, 4 Aug 2011 16:36:20 +0000 (06:36 -1000)]
Merge branch 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/parisc-2.6:
[PARISC] wire up sendmmsg syscall
[PARISC] fix return type of __atomic64_add_return
[PARISC] Fix futex support
Linus Torvalds [Thu, 4 Aug 2011 16:35:51 +0000 (06:35 -1000)]
Merge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
[S390] signal: use set_restore_sigmask() helper
[S390] smp: remove pointless comments in startup_secondary()
[S390] qdio: Use kstrtoul_from_user
[S390] sclp_async: Use kstrtoul_from_user
[S390] exec: remove redundant set_fs(USER_DS)
[S390] cpu hotplug: on cpu start wait until being marked active
[S390] signal: convert to use set_current_blocked()
[S390] asm offsets: fix coding style
[S390] Add support for IBM zEnterprise 114
[S390] dasd: check if raw track access is supported
[S390] Use diagnose 308 for system reset
[S390] Export store_status() function
[S390] dasd: use vmalloc for statistics input buffer
[S390] Add PSW restart shutdown trigger
[S390] missing return in page_table_alloc_pgste
[S390] qdio: 2nd stage retry on SIGA-W busy conditions
Arnaud Lacombe [Thu, 4 Aug 2011 14:39:44 +0000 (10:39 -0400)]
eisa/pci_eisa.c: fix BUG introduced by 005bdad7b80
While `pci_eisa_driver' still refer `pci_eisa_init', the .probe() function
should not be called after init memory release, as pointed out by commit 74b9a297. The structure is still referenced in the drivers subsystem, and can
be accesseed through sysfs, so the modpost warning is a false positive. Mark
it as such.
In the same time, the warning referenced in 005bdad7b80 did only mention
`pci_eisa_driver', not `pci_eisa_pci_tbl', so remove its marking.
Trond Myklebust [Tue, 2 Aug 2011 18:46:52 +0000 (14:46 -0400)]
NFSv4.1: Return NFS4ERR_BADSESSION to callbacks during session resets
If the client is in the process of resetting the session when it receives
a callback, then returning NFS4ERR_DELAY may cause a deadlock with the
DESTROY_SESSION call.
Basically, if the client returns NFS4ERR_DELAY in response to the
CB_SEQUENCE call, then the server is entitled to believe that the
client is busy because it is already processing that call. In that
case, the server is perfectly entitled to respond with a
NFS4ERR_BACK_CHAN_BUSY to any DESTROY_SESSION call.
Fix this by having the client reply with a NFS4ERR_BADSESSION in
response to the callback if it is resetting the session.
Trond Myklebust [Tue, 2 Aug 2011 18:46:29 +0000 (14:46 -0400)]
NFSv4.1: Fix the callback 'highest_used_slotid' behaviour
Currently, there is no guarantee that we will call nfs4_cb_take_slot() even
though nfs4_callback_compound() will consistently call
nfs4_cb_free_slot() provided the cb_process_state has set the 'clp' field.
The result is that we can trigger the BUG_ON() upon the next call to
nfs4_cb_take_slot().
This patch fixes the above problem by using the slot id that was taken in
the CB_SEQUENCE operation as a flag for whether or not we need to call
nfs4_cb_free_slot().
It also fixes an atomicity problem: we need to set tbl->highest_used_slotid
atomically with the check for NFS4_SESSION_DRAINING, otherwise we end up
racing with the various tests in nfs4_begin_drain_session().
Boaz Harrosh [Thu, 4 Aug 2011 04:52:51 +0000 (21:52 -0700)]
pnfs-obj: Fix the comp_index != 0 case
There were bugs in the case of partial layout where olo_comp_index
is not zero. This used to work and was tested but one of the later
cleanup SQUASHMEs broke it and was not tested since.
Also add a dprint that specify those received layout parameters.
Everything else was already printed.
[Needed in v3.0] CC: Stable Tree <stable@kernel.org> Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Boaz Harrosh [Thu, 4 Aug 2011 04:54:33 +0000 (21:54 -0700)]
pnfs-obj: Bug when we are running out of bio
When we have a situation that the number of pages we want
to encode is bigger then the size of the bio. (Which can
currently happen only when all IO is going to a single device
.e.g group_width==1) then the IO is submitted short and we
report back only the amount of bytes we actually wrote/read
and all is fine. BUT ...
There was a bug that the current length counter was advanced
before the fail to add the extra page, and we come to a situation
that the CDB length was one-page longer then the actual bio size,
which is of course rejected by the osd-target.
While here also fix the bio size calculation, in the case
that we received more then one group of devices.
Heiko Carstens [Tue, 2 Aug 2011 07:57:35 +0000 (09:57 +0200)]
nfs: add missing prefetch.h include
Fix this compile error on s390:
CC [M] fs/nfs/blocklayout/blocklayout.o
fs/nfs/blocklayout/blocklayout.c: In function 'bl_end_io_read':
fs/nfs/blocklayout/blocklayout.c:201:4: error: implicit declaration of function 'prefetchw'
Introduced with 9549ec01 "pnfsblock: bl_read_pagelist".
Michal Malý [Thu, 4 Aug 2011 14:24:22 +0000 (16:24 +0200)]
HID: lg4ff - Fix misleading info in Kconfig
The description of lg4ff driver has to be changed to reflect the fact that the
driver now handles a lot more Logitech wh the Wii. Entry in Kconfig has been
renamed to LOGIWHEELS_FF
Signed-off-by: Michal Malý <madcatxster@gmail.com> Signed-off-by: Simon Wood <simon@mungewell.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Michal Malý [Thu, 4 Aug 2011 14:22:07 +0000 (16:22 +0200)]
HID: lg4ff - Add autocentering command accepted by Formula Force EX
The Logitech driver sends Formula Force EX wheel a different command to
autocenering force. FFEX will accept the standard command used by the rest of
the wheels, but it won't set the centering properly.
Signed-off-by: Michal Malý <madcatxster@gmail.com> Signed-off-by: Simon Wood <simon@mungewell.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Michal Malý [Thu, 4 Aug 2011 14:20:40 +0000 (16:20 +0200)]
HID: lg4ff - Add range setting support and sysfs interface
Wheel range of certain Logitech wheels - namely Driving Force GT, Driving Force
Pro, G25 and G27 can be adjusted. Minimu is 40 degrees, maximum 900. DFGT, G25
and G27 all use a common command, DFP uses another one. Range can be set from
userspace by writing to
"/sys/module/hid_logitech/drivers/hid:logitech/<dev>range". The driver use list
to store range of each connected wheel; it's not possible to use driver_data in
hid_device struct as it's already b hig-lg driver.
Signed-off-by: Michal Malý <madcatxster@gmail.com> Signed-off-by: Simon Wood <simon@mungewell.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Michal Malý [Thu, 4 Aug 2011 14:18:11 +0000 (16:18 +0200)]
HID: lg4ff - Add support for native mode switching
This patch allows the lg4ff driver to switch wheels to the native mode. Since
this is specific to Logitech wheels only, it's handled in hid-lg4ff rather than
hid-lg.
Signed-off-by: Michal Malý <madcatxster@gmail.com> Signed-off-by: Simon Wood <simon@mungewell.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Michal Malý [Thu, 4 Aug 2011 14:16:09 +0000 (16:16 +0200)]
HID: lg4ff - Move handling of Logitech wheels to lg4ff driver
This is the first out of five patches me and Simon Wood (CC'd) have been
working on. It separates the handling of Logite from the generic lgff driver
and adds additional features specific for the Logitech wheels, namely
- Native mode support for Driving Force GT, Driving Force Pro, G25 and G27
wheels Every Logitech wheel reports itself as generic Logitech Driving Force
wheel (VID 046d, PID c294). This is done to ensu wheel will work on every USB
HID-aware system even when no Logitech driver is available. It however limits
the capabilit wheel - range is limited to 200 degrees, G25/G27 don't report the
clutch pedal and there is only one combined axis for t brake. The switch to
native mode is done via hardware-specific command which is different for each
wheel. When the wheel receives such command, it simulates reconnect and reports
to the OS with its actual PID.
- Adjustable wheel range DFGT, DFP, G25 and G27 have variable range of the
steering wheel. The range is limited by applying a maximum constant when the
wheel is turned beyond the allowed range. The limit as also set by a
hardware-specific command. There is a comm command for DFGT, G25 and G27 and
another one for DFP. It is probably possible to use the DFP command to limit
the range other Logitech wheels too, but this is not supported by the official
Logitech driver for Windows. The patch adds a sysfs interface which allows for
the range to be set from userspace.
- Fixed autocentering command All Logitech wheels support FF_AUTOCENTER effect.
The original implementation in the lgff driver didn't work well with patch
fixes it. According to USB communication sniffs the Formula Force EX (pretty
much rebranded original Driving Force accept the generic autocentering command,
this issue is also addressed by the patch
There are still some features this patch doesn't cover, but since some of them
will most likely require modifications of memless driver we have decided not to
include them yet.
As first we decided to move the handling of Logitech wheels from hid-lgff
driver to hid-lg4ff driver (originally used fo At also adds PID of Logitech
Driving Force GT.
Signed-off-by: Michal Malý <madcatxster@gmail.com> Signed-off-by: Simon Wood <simon@mungewell.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Sergei Kolzun [Thu, 4 Aug 2011 07:25:57 +0000 (00:25 -0700)]
HID: ACRUX - handle gamepads with different report layout
There are gamepads that share the same VID and PID but have different
report structure - instead of having 4 fields with one value they have
one field that can hold all 4 values. Make the driver cope with devices
using both styles.
Grant Likely [Thu, 4 Aug 2011 09:47:40 +0000 (10:47 +0100)]
dt: remove of_alias_get_id() reference
of_alias_get_id() is broken and being reverted. Remove the reference
to it and replace with a single incrementing id number.
There is no risk of regression here on the imx driver since the imx
change to use of_alias_get_id() is commit 22698aa2, "serial/imx: add
device tree probe support" which is new for v3.1, and it won't get
used unless CONFIG_OF is enabled and the board is booted using a
device tree. A single incrementing integer is sufficient for now.
Signed-off-by: Grant Likely <grant.likely@secretlab.ca> Acked-by: Shawn Guo <shawn.guo@linaro.org>
Tord Andersson [Wed, 3 Aug 2011 22:11:47 +0000 (22:11 +0000)]
macb: restore wrap bit when performing underrun cleanup
When TX underrun occurs, a cleanup is performed that marks all buffers
as used. As a side effect it also clears the wrap bit in the last
buffer. This patch will restore the wrap bit.
Signed-off-by: Tord Andersson <tord.andersson@endian.se> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Fix a misusage of the struct usb_cdc_notification to pass arguments to the
usb_control_msg function. The usb_control_msg function expects host endian
arguments but usb_cdc_notification stores these values as little endian.
Now usb_control_msg is directly invoked with host endian values.
Signed-off-by: Giuseppe Scrivano <giuseppe@southpole.se> Signed-off-by: David S. Miller <davem@davemloft.net>
Julia Lawall [Thu, 4 Aug 2011 08:30:34 +0000 (01:30 -0700)]
drivers/ide/cy82c693.c: Add missing pci_dev_put
Pci_get_slot calls pci_dev_get, so pci_dev_put is needed before leaving the
function in the case where pci_get_slot is locally used.
The semantic match that finds this problem is as follows:
(http://coccinelle.lip6.fr/)
// <smpl>
@@
local idexpression x;
expression e;
@@
*x = pci_get_slot(...)
... when != true x == NULL
when != pci_dev_put(x)
when != e = x
when != if (x != NULL) {<+... pci_dev_put(x); ...+>}
*return ...;
// </smpl>
Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
Thomas Gleixner [Thu, 4 Aug 2011 08:29:51 +0000 (01:29 -0700)]
ide: Fix irq flags madness
commit ec1a123 (IDE: pass IRQ flags to the IDE core) introduced the
bogosity of passing unfiltered resource->flags to the irq_flags which
are used for request_irq. It results in random bits set (especially
IORESOURCE_IRQ which maps to IRQF_PER_CPU).
Filter the bits proper.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
Linus Torvalds [Thu, 4 Aug 2011 08:03:29 +0000 (22:03 -1000)]
Boot up with usermodehelper disabled
The core device layer sends tons of uevent notifications for each device
it finds, and if the kernel has been built with a non-empty
CONFIG_UEVENT_HELPER_PATH that will make us try to execute the usermode
helper binary for all these events very early in the boot.
Not only won't the root filesystem even be mounted at that point, we
literally won't have necessarily even initialized all the process
handling data structures at that point, which causes no end of silly
problems even when the usermode helper doesn't actually succeed in
executing.
So just use our existing infrastructure to disable the usermodehelpers
to make the kernel start out with them disabled. We enable them when
we've at least initialized stuff a bit.
Problems related to an uninitialized
init_ipc_ns.ids[IPC_SHM_IDS].rw_mutex
reported by various people.
Reported-by: Manuel Lauss <manuel.lauss@googlemail.com> Reported-by: Richard Weinberger <richard@nod.at> Reported-by: Marc Zyngier <maz@misterjones.org> Acked-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Vasiliy Kulikov <segoon@openwall.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Thu, 4 Aug 2011 08:00:38 +0000 (22:00 -1000)]
x86: don't include xen/xen.h in <asm/io.h> unless XEN is enabled
Dmitry Kasatkin reports:
"kernel-devel package with kernel headers have no <include/xen>
directory if XEN is disabled. Modules which inclide asm/io.h won't
compile.
XEN related content is behind the CONFIG_XEN flag in the io.h. And
<xen/xen.h> should be also behind CONFIG_XEN flag."
So move the include of <xen/xen.h> down into the section that is
conditional on CONFIG_XEN.
Linus Torvalds [Thu, 4 Aug 2011 07:54:15 +0000 (21:54 -1000)]
Merge branch 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6
* 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6:
cpuidle: stop depending on pm_idle
x86 idle: move mwait_idle_with_hints() to where it is used
cpuidle: replace xen access to x86 pm_idle and default_idle
cpuidle: create bootparam "cpuidle.off=1"
mrst_pmu: driver for Intel Moorestown Power Management Unit
Linus Torvalds [Thu, 4 Aug 2011 07:53:27 +0000 (21:53 -1000)]
Merge branch 'apei-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6
* 'apei-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6:
ACPI, APEI, EINJ Param support is disabled by default
APEI GHES: 32-bit buildfix
ACPI: APEI build fix
ACPI, APEI, GHES: Add hardware memory error recovery support
HWPoison: add memory_failure_queue()
ACPI, APEI, GHES, Error records content based throttle
ACPI, APEI, GHES, printk support for recoverable error via NMI
lib, Make gen_pool memory allocator lockless
lib, Add lock-less NULL terminated single list
Add Kconfig option ARCH_HAVE_NMI_SAFE_CMPXCHG
ACPI, APEI, Add WHEA _OSC support
ACPI, APEI, Add APEI bit support in generic _OSC call
ACPI, APEI, GHES, Support disable GHES at boot time
ACPI, APEI, GHES, Prevent GHES to be built as module
ACPI, APEI, Use apei_exec_run_optional in APEI EINJ and ERST
ACPI, APEI, Add apei_exec_run_optional
ACPI, APEI, GHES, Do not ratelimit fatal error printk before panic
ACPI, APEI, ERST, Fix erst-dbg long record reading issue
ACPI, APEI, ERST, Prevent erst_dbg from loading if ERST is disabled
Russell King [Wed, 3 Aug 2011 23:01:00 +0000 (00:01 +0100)]
ARM: Fix build error for SMP=n builds
Unfortunately, the module fixups cause the kernel to fail to build
when SMP is not enabled. Fix this by removing the reference to
fixup_smp on non-SMP fixup kernels, but ensuring that if we do have
the SMP fixup section, we refuse to load the module.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Linus Torvalds [Thu, 4 Aug 2011 01:12:09 +0000 (15:12 -1000)]
Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending
* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
tcm_fc: Handle DDP/SW fc_frame_payload_get failures in ft_recv_write_data
target: Fix bug for transport_generic_wait_for_tasks with direct operation
target: iscsi_target depends on NET
target: Fix WRITE_SAME_16 lba assignment breakage
MAINTAINERS: Add target-devel list for drivers/target/
iscsi-target: Fix CONFIG_SMP=n and CONFIG_MODULES=n build failure
iscsi-target: Fix snprintf usage with MAX_PORTAL_LEN
iscsi-target: Fix uninitialized usage of cmd->pad_bytes
iscsi-target: strlen() doesn't count the terminator
iscsi-target: Fix NULL dereference on allocation failure
Vasiliy Kulikov [Wed, 3 Aug 2011 18:28:26 +0000 (22:28 +0400)]
shm: optimize exit_shm()
We may optimistically check .in_use == 0 without holding the rw_mutex:
it's the common case, and if it's zero, there certainly won't be any
segments associated with us.
After taking the lock, the idr_for_each() will do the right thing, so we
could now drop the re-check inside the lock without any real cost. But
it won't hurt.
tmpfs: expand "help" to explain value of TMPFS_POSIX_ACL
Expand the fs/Kconfig "help" info to clarify why it's a bad idea to
deselect the TMPFS_POSIX_ACL config variable.
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Acked-by: Hugh Dickins <hughd@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Wed, 3 Aug 2011 23:21:28 +0000 (16:21 -0700)]
mm: clarify the radix_tree exceptional cases
Make the radix_tree exceptional cases, mostly in filemap.c, clearer.
It's hard to devise a suitable snappy name that illuminates the use by
shmem/tmpfs for swap, while keeping filemap/pagecache/radix_tree
generality. And akpm points out that /* radix_tree_deref_retry(page) */
comments look like calls that have been commented out for unknown
reason.
Skirt the naming difficulty by rearranging these blocks to handle the
transient radix_tree_deref_retry(page) case first; then just explain the
remaining shmem/tmpfs swap case in a comment.
Hugh Dickins [Wed, 3 Aug 2011 23:21:27 +0000 (16:21 -0700)]
tmpfs radix_tree: locate_item to speed up swapoff
We have already acknowledged that swapoff of a tmpfs file is slower than
it was before conversion to the generic radix_tree: a little slower
there will be acceptable, if the hotter paths are faster.
But it was a shock to find swapoff of a 500MB file 20 times slower on my
laptop, taking 10 minutes; and at that rate it significantly slows down
my testing.
Now, most of that turned out to be overhead from PROVE_LOCKING and
PROVE_RCU: without those it was only 4 times slower than before; and
more realistic tests on other machines don't fare as badly.
I've tried a number of things to improve it, including tagging the swap
entries, then doing lookup by tag: I'd expected that to halve the time,
but in practice it's erratic, and often counter-productive.
The only change I've so far found to make a consistent improvement, is
to short-circuit the way we go back and forth, gang lookup packing
entries into the array supplied, then shmem scanning that array for the
target entry. Scanning in place doubles the speed, so it's now only
twice as slow as before (or three times slower when the PROVEs are on).
So, add radix_tree_locate_item() as an expedient, once-off,
single-caller hack to do the lookup directly in place. #ifdef it on
CONFIG_SHMEM and CONFIG_SWAP, as much to document its limited
applicability as save space in other configurations. And, sadly,
#include sched.h for cond_resched().
Hugh Dickins [Wed, 3 Aug 2011 23:21:27 +0000 (16:21 -0700)]
mm: a few small updates for radix-swap
Remove PageSwapBacked (!page_is_file_cache) cases from
add_to_page_cache_locked() and add_to_page_cache_lru(): those pages now
go through shmem_add_to_page_cache().
Remove a comment on maximum tmpfs size from fsstack_copy_inode_size(),
and add a comment on swap entries to invalidate_mapping_pages().
And mincore_page() uses find_get_page() on what might be shmem or a
tmpfs file: allow for a radix_tree_exceptional_entry(), and proceed to
find_get_page() on swapper_space if so (oh, swapper_space needs #ifdef).
Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Wed, 3 Aug 2011 23:21:26 +0000 (16:21 -0700)]
tmpfs: use kmemdup for short symlinks
But we've not yet removed the old swp_entry_t i_direct[16] from
shmem_inode_info. That's because it was still being shared with the
inline symlink. Remove it now (saving 64 or 128 bytes from shmem inode
size), and use kmemdup() for short symlinks, say, those up to 128 bytes.
I wonder why mpol_free_shared_policy() is done in shmem_destroy_inode()
rather than shmem_evict_inode(), where we usually do such freeing? I
guess it doesn't matter, and I'm not into NUMA mpol testing right now.
Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Rik van Riel <riel@redhat.com> Reviewed-by: Pekka Enberg <penberg@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Wed, 3 Aug 2011 23:21:25 +0000 (16:21 -0700)]
tmpfs: convert shmem_writepage and enable swap
Convert shmem_writepage() to use shmem_delete_from_page_cache() to use
shmem_radix_tree_replace() to substitute swap entry for page pointer
atomically in the radix tree.
As with shmem_add_to_page_cache(), it's not entirely satisfactory to be
copying such code from delete_from_swap_cache, but again judged easier
to sell than making its other callers go through the extras.
Remove the toy implementation's shmem_put_swap() and shmem_get_swap(),
now unreferenced, and the hack to disable swap: it's now good to go.
The way things have worked out, info->lock no longer helps to guard the
shmem_swaplist: we increment swapped under shmem_swaplist_mutex only.
That global mutex exclusion between shmem_writepage() and shmem_unuse()
is not pretty, and we ought to find another way; but it's been forced on
us by recent race discoveries, not a consequence of this patchset.
And what has become of the WARN_ON_ONCE(1) free_swap_and_cache() if a
swap entry was found already present? That's no longer possible, the
(unknown) one inserting this page into filecache would hit the swap
entry occupying that slot.
Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Wed, 3 Aug 2011 23:21:24 +0000 (16:21 -0700)]
tmpfs: convert mem_cgroup shmem to radix-swap
Remove mem_cgroup_shmem_charge_fallback(): it was only required when we
had to move swappage to filecache with GFP_NOWAIT.
Remove the GFP_NOWAIT special case from mem_cgroup_cache_charge(), by
moving its call out from shmem_add_to_page_cache() to two of thats three
callers. But leave it doing mem_cgroup_uncharge_cache_page() on error:
although asymmetrical, it's easier for all 3 callers to handle.
These two changes would also be appropriate if anyone were to start
using shmem_read_mapping_page_gfp() with GFP_NOWAIT.
Remove mem_cgroup_get_shmem_target(): mc_handle_file_pte() can test
radix_tree_exceptional_entry() to get what it needs for itself.
Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Wed, 3 Aug 2011 23:21:24 +0000 (16:21 -0700)]
tmpfs: convert shmem_getpage_gfp to radix-swap
Convert shmem_getpage_gfp(), the engine-room of shmem, to expect page or
swap entry returned from radix tree by find_lock_page().
Whereas the repetitive old method proceeded mainly under info->lock,
dropping and repeating whenever one of the conditions needed was not
met, now we can proceed without it, leaving shmem_add_to_page_cache() to
check for a race.
This way there is no need to preallocate a page, no need for an early
radix_tree_preload(), no need for mem_cgroup_shmem_charge_fallback().
Move the error unwinding down to the bottom instead of repeating it
throughout. ENOSPC handling is a little different from before: there is
no longer any race between find_lock_page() and finding swap, but we can
arrive at ENOSPC before calling shmem_recalc_inode(), which might
occasionally discover freed space.
Be stricter to check i_size before returning. info->lock is used for
little but alloced, swapped, i_blocks updates. Move i_blocks updates
out from under the max_blocks check, so even an unlimited size=0 mount
can show accurate du.
Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Wed, 3 Aug 2011 23:21:23 +0000 (16:21 -0700)]
tmpfs: convert shmem_unuse_inode to radix-swap
Convert shmem_unuse_inode() to use a lockless gang lookup of the radix
tree, searching for matching swap.
This is somewhat slower than the old method: because of repeated radix
tree descents, because of copying entries up, but probably most because
the old method noted and skipped once a vector page was cleared of swap.
Perhaps we can devise a use of radix tree tagging to achieve that later.
shmem_add_to_page_cache() uses shmem_radix_tree_replace() to compensate
for the lockless lookup by checking that the expected entry is in place,
under lock. It is not very satisfactory to be copying this much from
add_to_page_cache_locked(), but I think easier to sell than insisting
that every caller of add_to_page_cache*() go through the extras.
Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Wed, 3 Aug 2011 23:21:22 +0000 (16:21 -0700)]
tmpfs: convert shmem_truncate_range to radix-swap
Disable the toy swapping implementation in shmem_writepage() - it's hard
to support two schemes at once - and convert shmem_truncate_range() to a
lockless gang lookup of swap entries along with pages, freeing both.
Since the second loop tightens its noose until all entries of either
kind have been squeezed out (and we shall make sure that there's not an
instant when neither is visible), there is no longer a need for yet
another pass below.
shmem_radix_tree_replace() compensates for the lockless lookup by
checking that the expected entry is in place, under lock, before
replacing it. Here it just deletes, but will be used in later patches
to substitute swap entry for page or page for swap entry.
Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Wed, 3 Aug 2011 23:21:21 +0000 (16:21 -0700)]
tmpfs: copy truncate_inode_pages_range
Bring truncate.c's code for truncate_inode_pages_range() inline into
shmem_truncate_range(), replacing its first call (there's a followup
call below, but leave that one, it will disappear next).
Don't play with it yet, apart from leaving out the cleancache flush, and
(importantly) the nrpages == 0 skip, and moving shmem_setattr()'s
partial page preparation into its partial page handling.
Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Wed, 3 Aug 2011 23:21:21 +0000 (16:21 -0700)]
tmpfs: miscellaneous trivial cleanups
While it's at its least, make a number of boring nitpicky cleanups to
shmem.c, mostly for consistency of variable naming. Things like "swap"
instead of "entry", "pgoff_t index" instead of "unsigned long idx".
And since everything else here is prefixed "shmem_", better change
init_tmpfs() to shmem_init().
Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Wed, 3 Aug 2011 23:21:20 +0000 (16:21 -0700)]
tmpfs: demolish old swap vector support
The maximum size of a shmem/tmpfs file has been limited by the maximum
size of its triple-indirect swap vector. With 4kB page size, maximum
filesize was just over 2TB on a 32-bit kernel, but sadly one eighth of
that on a 64-bit kernel. (With 8kB page size, maximum filesize was just
over 4TB on a 64-bit kernel, but 16TB on a 32-bit kernel,
MAX_LFS_FILESIZE being then more restrictive than swap vector layout.)
It's a shame that tmpfs should be more restrictive than ramfs, and this
limitation has now been noticed. Add another level to the swap vector?
No, it became obscure and hard to maintain, once I complicated it to
make use of highmem pages nine years ago: better choose another way.
Surely, if 2.4 had had the radix tree pagecache introduced in 2.5, then
tmpfs would never have invented its own peculiar radix tree: we would
have fitted swap entries into the common radix tree instead, in much the
same way as we fit swap entries into page tables.
And why should each file have a separate radix tree for its pages and
for its swap entries? The swap entries are required precisely where and
when the pages are not. We want to put them together in a single radix
tree: which can then avoid much of the locking which was needed to
prevent them from being exchanged underneath us.
This also avoids the waste of memory devoted to swap vectors, first in
the shmem_inode itself, then at least two more pages once a file grew
beyond 16 data pages (pages accounted by df and du, but not by memcg).
Allocated upfront, to avoid allocation when under swapping pressure, but
pure waste when CONFIG_SWAP is not set - I have never spattered around
the ifdefs to prevent that, preferring this move to sharing the common
radix tree instead.
There are three downsides to sharing the radix tree. One, that it binds
tmpfs more tightly to the rest of mm, either requiring knowledge of swap
entries in radix tree there, or duplication of its code here in shmem.c.
I believe that the simplications and memory savings (and probable higher
performance, not yet measured) justify that.
Two, that on HIGHMEM systems with SWAP enabled, it's the lowmem radix
nodes that cannot be freed under memory pressure - whereas before it was
the less precious highmem swap vector pages that could not be freed.
I'm hoping that 64-bit has now been accessible for long enough, that the
highmem argument has grown much less persuasive.
Three, that swapoff is slower than it used to be on tmpfs files, since
it's using a simple generic mechanism not tailored to it: I find this
noticeable, and shall want to improve, but maybe nobody else will
notice.
So... now remove most of the old swap vector code from shmem.c. But,
for the moment, keep the simple i_direct vector of 16 pages, with simple
accessors shmem_put_swap() and shmem_get_swap(), as a toy implementation
to help mark where swap needs to be handled in subsequent patches.
Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Wed, 3 Aug 2011 23:21:19 +0000 (16:21 -0700)]
mm: let swap use exceptional entries
If swap entries are to be stored along with struct page pointers in a
radix tree, they need to be distinguished as exceptional entries.
Most of the handling of swap entries in radix tree will be contained in
shmem.c, but a few functions in filemap.c's common code need to check
for their appearance: find_get_page(), find_lock_page(),
find_get_pages() and find_get_pages_contig().
So as not to slow their fast paths, tuck those checks inside the
existing checks for unlikely radix_tree_deref_slot(); except for
find_lock_page(), where it is an added test. And make it a BUG in
find_get_pages_tag(), which is not applied to tmpfs files.
A part of the reason for eliminating shmem_readpage() earlier, was to
minimize the places where common code would need to allow for swap
entries.
The swp_entry_t known to swapfile.c must be massaged into a slightly
different form when stored in the radix tree, just as it gets massaged
into a pte_t when stored in page tables.
In an i386 kernel this limits its information (type and page offset) to
30 bits: given 32 "types" of swapfile and 4kB pagesize, that's a maximum
swapfile size of 128GB. Which is less than the 512GB we previously
allowed with X86_PAE (where the swap entry can occupy the entire upper
32 bits of a pte_t), but not a new limitation on 32-bit without PAE; and
there's not a new limitation on 64-bit (where swap filesize is already
limited to 16TB by a 32-bit page offset). Thirty areas of 128GB is
probably still enough swap for a 64GB 32-bit machine.
Provide swp_to_radix_entry() and radix_to_swp_entry() conversions, and
enforce filesize limit in read_swap_header(), just as for ptes.
Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Hugh Dickins [Wed, 3 Aug 2011 23:21:18 +0000 (16:21 -0700)]
radix_tree: exceptional entries and indices
A patchset to extend tmpfs to MAX_LFS_FILESIZE by abandoning its
peculiar swap vector, instead keeping a file's swap entries in the same
radix tree as its struct page pointers: thus saving memory, and
simplifying its code and locking.
This patch:
The radix_tree is used by several subsystems for different purposes. A
major use is to store the struct page pointers of a file's pagecache for
memory management. But what if mm wanted to store something other than
page pointers there too?
The low bit of a radix_tree entry is already used to denote an indirect
pointer, for internal use, and the unlikely radix_tree_deref_retry()
case.
Define the next bit as denoting an exceptional entry, and supply inline
functions radix_tree_exception() to return non-0 in either unlikely
case, and radix_tree_exceptional_entry() to return non-0 in the second
case.
If a subsystem already uses radix_tree with that bit set, no problem: it
does not affect internal workings at all, but is defined for the
convenience of those storing well-aligned pointers in the radix_tree.
The radix_tree_gang_lookups have an implicit assumption that the caller
can deduce the offset of each entry returned e.g. by the page->index of
a struct page. But that may not be feasible for some kinds of item to
be stored there.
radix_tree_gang_lookup_slot() allow for an optional indices argument,
output array in which to return those offsets. The same could be added
to other radix_tree_gang_lookups, but for now keep it to the only one
for which we need it.
Signed-off-by: Hugh Dickins <hughd@google.com> Acked-by: Rik van Riel <riel@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Andrew Morton [Wed, 3 Aug 2011 23:21:17 +0000 (16:21 -0700)]
drivers/video/backlight/aat2870_bl.c: make it buildable as a module
i386 allmodconfig:
drivers/built-in.o: In function `aat2870_bl_remove':
aat2870_bl.c:(.text+0x414f9): undefined reference to `backlight_device_unregister'
drivers/built-in.o: In function `aat2870_bl_probe':
aat2870_bl.c:(.text+0x418fc): undefined reference to `backlight_device_register'
aat2870_bl.c:(.text+0x41a31): undefined reference to `backlight_device_unregiste
Cc: Jin Park <jinyoungp@nvidia.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Axel Lin <axel.lin@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Current implementation tests wrong value for setting
aat2870_bl->max_current.
- In the current implementation, we cannot differentiate between 2 cases:
a) if pdata->max_current is not set , or
b) pdata->max_current is set to AAT2870_CURRENT_0_45 (which is also 0).
Fix it by setting AAT2870_CURRENT_0_45 to be 1 and adjust the equation in
aat2870_brightness() accordingly.
Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Samuel Ortiz <sameo@linux.intel.com> Tested-by: Jin Park <jinyoungp@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Axel Lin [Wed, 3 Aug 2011 23:21:16 +0000 (16:21 -0700)]
drivers/video/backlight/aat2870_bl.c: fix error checking for backlight_device_register
backlight_device_register() returns ERR_PTR() on error.
Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Jin Park <jinyoungp@nvidia.com> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
WANG Cong [Wed, 3 Aug 2011 23:21:15 +0000 (16:21 -0700)]
cris: add missing declaration of kgdb_init() and breakpoint()
Fix:
arch/cris/arch-v10/kernel/irq.c:239: error: implicit declaration of function 'kgdb_init'
arch/cris/arch-v10/kernel/irq.c:240: error: implicit declaration of function 'breakpoint'
Declare these two functions.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: WANG Cong <xiyou.wangcong@gmail.com> Cc: Mikael Starvik <starvik@axis.com> Cc: Jesper Nilsson <jesper.nilsson@axis.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
projects / karo-tx-linux.git / log