Olof Johansson [Sat, 19 Nov 2016 00:49:09 +0000 (16:49 -0800)]
Merge tag 'omap-for-v4.10/legacy-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc
Legacy platform_data removal for omaps for v4.10 merge window.
We've dropped the last legacy boot board-*.c files for mach-omap2
for v4.9 so now we can start removing the unused platform_data.
All of the below has been unused since v4.9 merge window:
- Drop legacy pmic init code
- Apply seq_puts() fixes for legacy mux code, then drop it
- Drop legacy serial init
- Drop legacy i2c init
- Drop legacy PM init
- Drop legacy twl4030 platform init
- Drop legacy USB host init
- Drop legacy muxing for tusb6010, n8x0 is still using it's
platform init via pdata-quirks.c
- Drop legacy musb init
- Drop hwmod related legacy mux code
- Drop legacy hwmod data for omap3
- Drop legacy smsc911x and smc91x init
- Drop legacy board flash init
- Drop legacy ads7846 init
- Drop legacy sdram timings
* tag 'omap-for-v4.10/legacy-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (21 commits)
ARM: OMAP2+: Drop legacy sdram timings
ARM: OMAP2+: Drop legacy ads7846 init
ARM: OMAP2+: Remove legacy board-flash.c
ARM: OMAP2+: Remove legacy smsc911x and smc91x GPMC support
ARM: OMAP2+: Remove legacy data from hwmod for omap3
ARM: OMAP2+: Remove legacy mux code
ARM: OMAP2+: Remove legacy hwmod mux code
ARM: OMAP2+: Remove legacy usb-musb.c platform init code
ARM: OMAP2+: Remove legacy muxing for usb-tusb6010.c
ARM: OMAP2+: Remove legacy usb-host.c platform init code
ARM: OMAP2+: Remove legacy twl4030 platform init code
ARM: OMAP2+: Remove legacy PM init
ARM: OMAP2+: Remove legacy i2c.c platform init code
ARM: OMAP2+: Remove legacy serial.c
ARM: OMAP2+: mux: Use seq_putc() in omap_mux_dbg_signal_show()
ARM: OMAP2+: mux: Replace three seq_printf() calls by seq_puts()
ARM: OMAP: kill omap_pmic_init
ARM: OMAP2: kill omap2_pmic_init
ARM: OMAP3: kill omap3_pmic_init
ARM: OMAP3: kill omap3_pmic_get_config and twl_{get,set}_voltage
...
Olof Johansson [Sat, 19 Nov 2016 00:42:44 +0000 (16:42 -0800)]
Merge tag 'omap-for-v4.10/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc
SoC changes for omaps for v4.10 merge window:
- Add hwmod interconnect target wrapper module data for crypto
accelerators for am3xxx, am43xx and dra7
- Add support for dra71x family of SoCs
- PM fixes for omap4/5 needed for omap5 cpuidle
* tag 'omap-for-v4.10/soc-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: DRA7: hwmod: Do not register RTC on DRA71
ARM: OMAP2+: board-generic: add support for DRA71x family
ARM: AMx3xx: hwmod: Add data for RNG
ARM: AM43xx: hwmod: Add data for DES
ARM: OMAP: DRA7xx: Make L4SEC clock domain SWSUP only
ARM: DRA7: hwmod: Add data for RNG IP
ARM: DRA7: hwmod: Add data for SHA IP
ARM: DRA7: hwmod: Add data for AES IP
ARM: DRA7: hwmod: Add data for DES IP
ARM: OMAP5: Add basic cpuidle MPU CSWR support
ARM: OMAP4+: Fix bad fallthrough for cpuidle
ARM: OMAP5: Fix mpuss_early_init
ARM: OMAP5: Fix build for PM code
Olof Johansson [Fri, 18 Nov 2016 18:33:36 +0000 (10:33 -0800)]
Merge tag 'soc-for-4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into next/soc
STM32 SOC updates for v4.10, round 1.
Highlights:
----------
- Add new MCU SOC STM32F746
* tag 'soc-for-4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
ARM: Kconfig: Introduce MACH_STM32F746 flag
ARM: mach-stm32: Add a new SOC - STM32F746
Olof Johansson [Fri, 18 Nov 2016 17:59:26 +0000 (09:59 -0800)]
Merge tag 'imx-soc-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/soc
i.MX SoC changes for 4.10:
- Drop PL310_ERRATA_769419 for Vybrid, as it turns out that the SoC
integrates revision r3p2 of the L2C-310, which is not affected by
errata 769419.
- Support perf for i.MX6 Multi-Mode DDR Controller (MMDC), so that we
can profile memory access performance.
- Support i.MX6ULL SoC using i.MX6UL base, since it's a derivative of
i.MX6UL and pin-to-pin compatible with i.MX6UL.
* tag 'imx-soc-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx: mach-imx6ul: add imx6ull support
ARM: imx: Drop errata 769419 for Vybrid
ARM: imx: mmdc perf function support i.MX6QP
ARM: imx: Added perf functionality to mmdc driver
Linus Walleij [Wed, 9 Nov 2016 08:12:06 +0000 (09:12 +0100)]
ARM: integrator: drop EBI access use syscon
The EBI lookup is not longer in use: this has been moved to the
NAND chip driver. The syscon node is better accessed indirectly
using the regmap like the NAND chip driver does, so let's use
the syscon to set the modem control signals RTS/CTS through the
dedicated syscon register.
We also migrate the decoder status "SC_DEC" register that
enumerate the logic modules using syscon.
Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Fri, 18 Nov 2016 07:15:25 +0000 (23:15 -0800)]
Merge tag 'pxa-for-4.10' of https://github.com/rjarzmik/linux into next/soc
This is the pxa changes for v4.10 cycle.
This cycle is covering :
- some clock fixes common with sa1100 architecture
- the consequence of the pxa_camera conversion to v4l2
- a small irq related fix for pxa25x device-tree only
* tag 'pxa-for-4.10' of https://github.com/rjarzmik/linux:
ARM: pxa: fix pxa25x interrupt init
ARM: pxa: remove duplicated include from spitz.c
ARM: pxa: em-x270: use the new pxa_camera platform_data
ARM: pxa: ezx: use the new pxa_camera platform_data
ARM: pxa: mioa701: use the new pxa_camera platform_data
ARM: pxa: pxa_cplds: honor probe deferral
ARM: sa11x0/pxa: get rid of get_clock_tick_rate
watchdog: sa11x0/pxa: get rid of get_clock_tick_rate
ARM: sa11x0/pxa: acquire timer rate from the clock rate
clk: pxa25x: OSTIMER0 clocks from the main oscillator
Olof Johansson [Fri, 18 Nov 2016 01:41:30 +0000 (17:41 -0800)]
Merge tag 'renesas-soc-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc
Renesas ARM Based SoC Updates for v4.10
Enhancements:
* Basic support for r8a7743 SoC; only SoC code so far
* Select errata 798181 for SoCs with CA15 cores
Clean-up:
* Consolidate R8A7743 and R8A779[234] machine definitions
Documentation:
* Add Marzen, Gose and Alt board part numbers to DT bindings
* Document SK-RZG1M board
* tag 'renesas-soc-for-v4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: r8a7779/marzen: Add board part number to DT bindings
ARM: shmobile: select errata 798181 for SoCs with CA15 cores
ARM: shmobile: Consolidate R8A7743 and R8A779[234] machine definitions
ARM: shmobile: r8a7793/gose: Add board part number to DT bindings
ARM: shmobile: r8a7794/alt: Add board part number to DT bindings
ARM: shmobile: document SK-RZG1M board
ARM: shmobile: r8a7743: basic SoC support
ARM: shmobile: only call rcar_gen2_clocks_init() if present
ARM: shmobile: Sort Kconfig selections
Andrey Smirnov [Wed, 9 Nov 2016 16:44:10 +0000 (08:44 -0800)]
ARM: imx: Drop errata 769419 for Vybrid
According to the datasheet, VF610 uses revision r3p2 of the L2C-310
block, same as i.MX6Q+, which does not require a software workaround for
ARM errata 769419.
Tony Lindgren [Thu, 10 Nov 2016 23:07:32 +0000 (16:07 -0700)]
ARM: OMAP2+: Drop legacy sdram timings
These are no longer used. If somebody needs to configure
memory timings for various idle modes, they should be
implemented as a device driver callbacks from the PM
code.
Legacy board files in mach-omap2 used the helper functions
board_{nor,nand,onenand}_init() to initialize the flash
devices attached to the GPMC.
With Device Tree booting the initialization is handled by
the GPMC driver gpmc_probe_*_child() functions so this
code is not needed anymore now that OMAP2+ is DT-only.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
ARM: OMAP2+: Remove legacy smsc911x and smc91x GPMC support
When connecting an ethernet chip to the GPMC, such as smc91x
or smsc911x, a GPIO has to be requested to be used as an IRQ
and also the IO memory for a GPMC chip-select.
When booting with DT the chip-select allocation is handled
in a generic manner in the GPMC driver and the GPIO to IRQ
mapping is made by the DT core so this code is not needed
anymore now that mach-omap2 related boards are DT-only.
Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Fri, 21 Oct 2016 10:02:12 +0000 (03:02 -0700)]
ARM: OMAP2+: Remove legacy data from hwmod for omap3
This data is now coming from device tree so we can remove the
duplicate data. Let's keep the DSS and DMA related things for now
until those have been converted to device tree completely.
While at it, let's also add the trailing commas to data structures
so further processing with scripts will be a bit easier.
Cc: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Mon, 17 Oct 2016 07:08:40 +0000 (00:08 -0700)]
ARM: OMAP2+: Remove legacy PM init
This is no longer needed when booted with device tree.
And let's replace cpu_is with soc_is for the PM code to
avoid confusion, they do the same thing.
Note that omap_pmic_late_init() now just calls
omap3_twl_init() and omap4_twl_init() to initialize the
voltage layer so we can remove the remaining references
to twl-common code and remove it in the following patch.
Nishanth Menon [Fri, 21 Oct 2016 10:38:38 +0000 (16:08 +0530)]
ARM: DRA7: hwmod: Do not register RTC on DRA71
RTC is not available on DRA71x, so accessing any of the RTC
register or clkctrl register will lead to a crash. So, do not
register RTC hwmod for DRA71x.
Joel Fernandes [Tue, 18 Oct 2016 07:55:25 +0000 (10:55 +0300)]
ARM: OMAP: DRA7xx: Make L4SEC clock domain SWSUP only
Using HWSUP for l4sec clock domain is causing warnings in HWMOD code for
DRA7. Based on some observations, once the clock domain goes into an IDLE
state (because of no activity etc), the IDLEST for the module goes to '0x2'
value which means Interface IDLE condition. So far so go, however once the
MODULEMODE is set to disabled for the particular IP, the IDLEST for the
module should go to '0x3', per the HW AUTO IDLE protocol. However this is
not observed and there is no reason per the protocl for the transition to
not happen. This could potentially be a bug in the HW AUTO state-machine.
Work around for this is to use SWSUP only for the particular clockdomain.
With this all the transitions of IDLEST happen correctly and warnings
don't occur.
Signed-off-by: Joel Fernandes <joelf@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Joel Fernandes [Tue, 18 Oct 2016 07:55:24 +0000 (10:55 +0300)]
ARM: DRA7: hwmod: Add data for RNG IP
DRA7 SoC contains hardware random number generator. Add hwmod data for
this IP so that it can be utilized.
Signed-off-by: Joel Fernandes <joelf@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
[t-kristo@ti.com: squashed the RNG hwmod IP flag fixes from Lokesh,
squashed the HS chip fix from Daniel Allred] Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Joel Fernandes [Tue, 18 Oct 2016 07:55:22 +0000 (10:55 +0300)]
ARM: DRA7: hwmod: Add data for AES IP
DRA7 SoC contains AES crypto hardware accelerator. Add hwmod data for
this IP so that it can be utilized by crypto frameworks.
Signed-off-by: Joel Fernandes <joelf@ti.com> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
[t-kristo@ti.com: squash in support for both AES1 and AES2 cores] Signed-off-by: Tero Kristo <t-kristo@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
This patch adds MPUSS low power states in cpuidle.
C1 - CPU0 WFI + CPU1 WFI + MPU ON
C2 - CPU0 RET + CPU1 RET + MPU CSWR
Modified from TI kernel tree commit 605967fd2205 ("ARM: DRA7: PM:
cpuidle MPU CSWR support") except enable cpuidle for omap5 instead
of dra7.
According to Nishanth Menon <nm@ti.com>, cpuidle on dra7 is not
supported properly in the hardware so we don't want to enable it.
However, for omap5 this adds some nice power savings. Note that
the TI 3.8 based tree has other cpuidle states that we may be able
to enable later on.
On omap5-uevm, the power consumption eventually settles down to about
920mW with ehci-omap and ohci-omap3 unloaded compared to about 1.7W
without these patches. Note that it seems to take few minutes after
booting for the idle power to go down to 920mW from 1.3W, no idea so
far what might be causing that.
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
[ j-keerthy@ti.com rework on 3.14] Signed-off-by: Keerthy <j-keerthy@ti.com>
[nm@ti.com: updates based on profiling]
[tony@atomide.com: dropped CPUIDLE_FLAG_TIME_VALID no longer used,
changed for omap5 only as requested by Nishanth, updated comments] Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Mon, 7 Nov 2016 23:50:11 +0000 (16:50 -0700)]
ARM: OMAP4+: Fix bad fallthrough for cpuidle
We don't want to fall through to a bunch of errors for retention
if PM_OMAP4_CPU_OSWR_DISABLE is not configured for a SoC.
Fixes: 6099dd37c669 ("ARM: OMAP5 / DRA7: Enable CPU RET on suspend") Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Mon, 7 Nov 2016 23:50:11 +0000 (16:50 -0700)]
ARM: OMAP5: Fix mpuss_early_init
We need to properly initialize mpuss also on omap5 like we do on omap4.
Otherwise we run into similar kexec problems like we had on omap4 when
trying to kexec from a kernel with PM initialized.
Fixes: 0573b957fc21 ("ARM: OMAP4+: Prevent CPU1 related hang with kexec") Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Mon, 7 Nov 2016 23:50:10 +0000 (16:50 -0700)]
ARM: OMAP5: Fix build for PM code
It's CONFIG_SOC_OMAP5, not CONFIG_ARCH_OMAP5. Looks like make randconfig
builds have not hit this one yet.
Fixes: b3bf289c1c45 ("ARM: OMAP2+: Fix build with CONFIG_SMP and CONFIG_PM
is not set") Acked-by: Santosh Shilimkar <ssantosh@kernel.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
Simon Horman [Mon, 31 Oct 2016 09:52:17 +0000 (10:52 +0100)]
ARM: shmobile: only call rcar_gen2_clocks_init() if present
The RZ/G1M (r8a7743) uses the R-Car Gen2 core, but not the R-Car Gen2 clock
driver. This is a harbinger of a transition for R-Car Gen2 SoCs. As the
process to get all the required pieces in place is somewhat complex it
seems useful to try to disentangle dependencies where possible.
The approach here is to temporarily disable calling rcar_gen2_clocks_init()
if no R-Car Gen2 SoC are configured and thus the symbol will not be
present.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Axel Haslam [Mon, 31 Oct 2016 20:47:21 +0000 (15:47 -0500)]
ARM: davinci: da8xx: register USB PHY clocks in the DT file
The usb20_phy clock needs to be registered for the driver to be able
to get and enable a clock. Currently the usb phy clocks are registered
from board files, which will not be called during a device tree based
boot.
To be able to probe correctly usb form a device tree boot, register
the usb phy clocks from the DT specific init.
Unfortunately, davinci does not have proper clock support on device tree
yet, so by registering the clock from the DT specific file we are
forced to hardcode the parent clock, and cannot select refclkin as
parent for any of the phy clocks of the da850 family.
As none of the current da850 based boards currently in mainline use
refclkin as source. I guess we can live with this limitation until clocks
are correctly represented through CCF/device tree.
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
[Added error checking] Signed-off-by: David Lechner <david@lechnology.com>
[nsekhar@ti.com: typo fixes in commit message] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
David Lechner [Mon, 31 Oct 2016 20:47:20 +0000 (15:47 -0500)]
ARM: davinci: da8xx: add usb phy clocks
Up to this point, the USB phy clock configuration was handled manually in
the board files and in the usb drivers. This adds proper clocks so that
the usb drivers can use clk_get and clk_enable and not have to worry about
the details. Also, the related code is removed from the board files and
replaced with the new clock registration functions.
This also removes the #if IS_ENABLED(CONFIG_USB_MUSB_HDRC) around the musb
declaration and renames the musb platform device so that we can reference
it from the usb20 clock even if the musb device is not used.
Signed-off-by: David Lechner <david@lechnology.com> Signed-off-by: Axel Haslam <ahaslam@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Kbuild descends into arch/arm/mach-mediatek/Makefile only when
CONFIG_ARCH_MEDIATEK is enabled. So, obj-$(CONFIG_ARCH_MEDIATEK)
is always equivalent to obj-y in this Makefile.
David Lechner [Thu, 27 Oct 2016 00:18:15 +0000 (19:18 -0500)]
ARM: davinci: da8xx: Add USB PHY platform device
There is now a proper phy driver for the DA8xx SoC USB PHY. This adds the
platform device declarations needed to use it.
Signed-off-by: David Lechner <david@lechnology.com>
[nsekhar@ti.com: keep usb-davinci.h included in board-da830-evm.c
minor subject line adjustment] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Karl Beldan [Wed, 5 Oct 2016 13:05:31 +0000 (15:05 +0200)]
ARM: davinci: da8xx-dt: add OF_DEV_AUXDATA entry for lcdc
This is required for tilcdc to be able to acquire a functional clock
on da850 SoCs.
Signed-off-by: Karl Beldan <kbeldan@baylibre.com>
[Bartosz:
- added the commit description
- changed the compatible string to 'ti,da850-tilcdc'] Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Axel Haslam [Wed, 26 Oct 2016 19:41:55 +0000 (21:41 +0200)]
ARM: davinci: da8xx: Add full regulator constraints for non-DT boot
The phy framework requests an optional "phy" regulator. If it does
not find one, it returns -EPROBE_DEFER. In the case of non-DT boot
for the omap138-lcdk board, this would prevent the usb11 phy to probe
correctly and ohci would not enumerate.
By calling regulator_has_full_constraints(), An error would be returned
instead of -EPROBE_DEFER for the regulator, and the probe of the phy driver
can continue normally without a regulator.
Signed-off-by: Axel Haslam <ahaslam@baylibre.com>
[nsekhar@ti.com: minor commit message updates] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
The CFGCHIP registers are used by a number of devices, so use a syscon
device to share them. The first consumer of this will be the phy-da8xx-usb
driver.
Add the syscon device and register it.
Signed-off-by: David Lechner <david@lechnology.com>
[nsekhar@ti.com: minor commit message fixes] Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Alexandre Bailon [Thu, 27 Oct 2016 15:32:36 +0000 (17:32 +0200)]
ARM: davinci: da8xx: Remove duplicated defines
Some macro for DA8xx CFGCHIP are defined in usb-davinci.h,
but da8xx-cfgchip.h intend to replace them.
Remove duplicated defines between da8xx-cfgchip.h and usb-davinci.h
Signed-off-by: Alexandre Bailon <abailon@baylibre.com> Signed-off-by: Sekhar Nori <nsekhar@ti.com>
Olof Johansson [Sat, 29 Oct 2016 18:40:52 +0000 (11:40 -0700)]
Merge tag 'vexpress-fixes-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into next/soc
ARMv7 Vexpress fixes for v4.10
Couple of fixes to MCPM/CCI drivers to check and ensure that the kernel
is actually allowed to take control over CCI ports(i.e. running in
secure mode) before enabling MCPM.
This is needed to boot Linux in HYP mode (very useful for development
on virtualization) with CONFIG_MCPM enabled kernel.
* tag 'vexpress-fixes-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
drivers: cci: add missing CCI port availability firmware check
ARM: vexpress: refine MCPM smp operations override criteria
The removed clock.h file is a leftover after moving the platform to a
common clock framework driver, it contains unused "struct clk"
definition, which under circumstances may coalesce with a generic
"struct clk" declaration for clock consumers. Also remove useless
include of the removed local file from a single source file
mach-lpc32xx/pm.c.
Signed-off-by: Vladimir Zapolskiy <vz@mleia.com> Signed-off-by: Sylvain Lemieux <slemieux.tyco@gmail.com>
The removed LPC32xx mach/irqs.h file is not included in any source
code, function declaration lpc32xx_init_irq() is also unused, remove
them as leftovers after switching to a new interrupt controller
driver.
Linus Torvalds [Sun, 23 Oct 2016 23:58:55 +0000 (16:58 -0700)]
Merge tag 'upstream-4.9-rc2' of git://git.infradead.org/linux-ubifs
Pull UBI[FS] fixes from Richard Weinberger:
"This contains fixes for issues in both UBI and UBIFS:
- Fallout from the merge window, refactoring UBI code introduced some
issues.
- Fixes for an UBIFS readdir bug which can cause getdents() to busy
loop for ever and a bug in the UBIFS xattr code"
* tag 'upstream-4.9-rc2' of git://git.infradead.org/linux-ubifs:
ubifs: Abort readdir upon error
UBI: Fix crash in try_recover_peb()
ubi: fix swapped arguments to call to ubi_alloc_aeb
ubifs: Fix xattr_names length in exit paths
ubifs: Rename ubifs_rename2
Linus Torvalds [Sun, 23 Oct 2016 23:52:19 +0000 (16:52 -0700)]
Merge tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"A few bug fixes and add some missing KERN_CONT annotations"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: add missing KERN_CONT to a few more debugging uses
fscrypto: lock inode while setting encryption policy
ext4: correct endianness conversion in __xattr_check_inode()
fscrypto: make XTS tweak initialization endian-independent
ext4: do not advertise encryption support when disabled
jbd2: fix incorrect unlock on j_list_lock
ext4: super.c: Update logging style using KERN_CONT
- Two EXTENDED_COPY SCSI status fixes for ESX VAAI (Dinesh Israni +
Nixon Vincent)
- Revert a v4.8 residual overflow change, that breaks sg_inq with
small allocation lengths.
There are a number of folks stress testing the v4.1.y regression fix
in their environments, and more folks doing iser-target I/O stress
testing atop recent v4.x.y code.
There is also one v4.2.y+ RCU conversion regression related to
explicit NodeACL configfs changes, that is still being tracked down"
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
target/tcm_fc: use CPU affinity for responses
target/tcm_fc: Update debugging statements to match libfc usage
target/tcm_fc: return detailed error in ft_sess_create()
target/tcm_fc: print command pointer in debug message
target: fix potential race window in target_sess_cmd_list_waiting()
Revert "target: Fix residual overflow handling in target_complete_cmd_with_length"
target: Don't override EXTENDED_COPY xcopy_pt_cmd SCSI status code
target: Make EXTENDED_COPY 0xe4 failure return COPY TARGET DEVICE NOT REACHABLE
target: Re-add missing SCF_ACK_KREF assignment in v4.1.y
iscsi-target: fix iscsi cmd leak
iscsi-target: fix spelling mistake "Unsolicitied" -> "Unsolicited"
target/user: Fix comments to not refer to data ring
target/user: Return an error if cmd data size is too large
target/user: Use sense_reason_t in tcmu_queue_cmd_ring
Linus Torvalds [Sun, 23 Oct 2016 22:56:23 +0000 (15:56 -0700)]
Merge tag 'for-linus-4.9-2' of git://git.code.sf.net/p/openipmi/linux-ipmi
Pull IPMI updates from Corey Minyard:
"A small bug fix and a new driver for acting as an IPMI device.
I was on vacation during the merge window (a long vacation) but this
is a bug fix that should go in and a new driver that shouldn't hurt
anything.
This has been in linux-next for a month or so"
* tag 'for-linus-4.9-2' of git://git.code.sf.net/p/openipmi/linux-ipmi:
ipmi: fix crash on reading version from proc after unregisted bmc
ipmi/bt-bmc: remove redundant return value check of platform_get_resource()
ipmi/bt-bmc: add a dependency on ARCH_ASPEED
ipmi: Fix ioremap error handling in bt-bmc
ipmi: add an Aspeed BT IPMI BMC driver
MMDC is a multi-mode DDR controller that supports DDR3/DDR3L x16/x32/x64
and LPDDR2 two channel x16/x32 memory types. MMDC is configurable, high
performance, and optimized. MMDC is present on i.MX6 Quad and i.MX6
QuadPlus devices, but this driver only supports i.MX6 Quad at the moment.
MMDC provides registers for performance counters which read via this
driver to help debug memory throughput and similar issues.
$ perf stat -a -e mmdc/busy-cycles/,mmdc/read-accesses/,mmdc/read-bytes/,mmdc/total-cycles/,mmdc/write-accesses/,mmdc/write-bytes/ dd if=/dev/zero of=/dev/null bs=1M count=5000
Performance counter stats for 'dd if=/dev/zero of=/dev/null bs=1M count=5000':
Linus Torvalds [Sat, 22 Oct 2016 17:23:15 +0000 (10:23 -0700)]
Merge branch 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"This updates contains:
- A revert which addresses a boot failure on ARM Sun5i platforms
- A new clocksource driver, which has been delayed beyond rc1 due to
an interrupt driver issue which was unearthed by this driver. The
debugging of that issue and the discussion about the proper
solution made this driver miss the merge window. There is no point
in delaying it for a full cycle as it completes the basic mainline
support for the new JCore platform and does not create any risk
outside of that platform"
* 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
Revert "clocksource/drivers/timer_sun5i: Replace code by clocksource_mmio_init"
clocksource: Add J-Core timer/clocksource driver
of: Add J-Core timer bindings
Linus Torvalds [Sat, 22 Oct 2016 16:58:49 +0000 (09:58 -0700)]
Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Ingo Molnar:
"Three fixes, a hw-enablement and a cross-arch fix/enablement change:
- SGI/UV fix for older platforms
- x32 signal handling fix
- older x86 platform bootup APIC fix
- AVX512-4VNNIW (Neural Network Instructions) and AVX512-4FMAPS
(Multiply Accumulation Single precision instructions) enablement.
- move thread_info back into x86 specific code, to make life easier
for other architectures trying to make use of
CONFIG_THREAD_INFO_IN_TASK_STRUCT=y"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot/smp: Don't try to poke disabled/non-existent APIC
sched/core, x86: Make struct thread_info arch specific again
x86/signal: Remove bogus user_64bit_mode() check from sigaction_compat_abi()
x86/platform/UV: Fix support for EFI_OLD_MEMMAP after BIOS callback updates
x86/cpufeature: Add AVX512_4VNNIW and AVX512_4FMAPS features
x86/vmware: Skip timer_irq_works() check on VMware
Linus Torvalds [Sat, 22 Oct 2016 16:39:10 +0000 (09:39 -0700)]
Merge branch 'mm-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull vmap stack fixes from Ingo Molnar:
"This is fallout from CONFIG_HAVE_ARCH_VMAP_STACK=y on x86: stack
accesses that used to be just somewhat questionable are now totally
buggy.
These changes try to do it without breaking the ABI: the fields are
left there, they are just reporting zero, or reporting narrower
information (the maps file change)"
* 'mm-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
mm: Change vm_is_stack_for_task() to vm_is_stack_for_current()
fs/proc: Stop trying to report thread stacks
fs/proc: Stop reporting eip and esp in /proc/PID/stat
mm/numa: Remove duplicated include from mprotect.c
Linus Torvalds [Sat, 22 Oct 2016 16:33:51 +0000 (09:33 -0700)]
Merge branch 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Ingo Molnar:
"Mostly irqchip driver fixes, plus a symbol export"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
kernel/irq: Export irq_set_parent()
irqchip/gic: Add missing \n to CPU IF adjustment message
irqchip/jcore: Don't show Kconfig menu item for driver
irqchip/eznps: Drop pointless static qualifier in nps400_of_init()
irqchip/gic-v3-its: Fix entry size mask for GITS_BASER
irqchip/gic-v3-its: Fix 64bit GIC{R,ITS}_TYPER accesses
Linus Torvalds [Sat, 22 Oct 2016 02:13:00 +0000 (19:13 -0700)]
Merge tag 'powerpc-4.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"Fixes marked for stable:
- Prevent unlikely crash in copro_calculate_slb() (Frederic Barrat)
- cxl: Prevent adapter reset if an active context exists (Vaibhav Jain)
Fixes for code merged this cycle:
- Fix boot on systems with uncompressed kernel image (Heiner Kallweit)
- Drop dump_numa_memory_topology() (Michael Ellerman)
- Fix numa topology console print (Aneesh Kumar K.V)
- Ignore the pkey system calls for now (Stephen Rothwell)"
* tag 'powerpc-4.9-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: Ignore the pkey system calls for now
powerpc: Fix numa topology console print
powerpc/mm: Drop dump_numa_memory_topology()
cxl: Prevent adapter reset if an active context exists
powerpc/boot: Fix boot on systems with uncompressed kernel image
powerpc/mm: Prevent unlikely crash in copro_calculate_slb()
Linus Torvalds [Sat, 22 Oct 2016 02:09:29 +0000 (19:09 -0700)]
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull KVM fixes from Radim Krčmář:
"ARM:
- avoid livelock when walking guest page tables
- fix HYP mode static keys without CC_HAVE_ASM_GOTO
MIPS:
- fix a build error without TRACEPOINTS_ENABLED
s390:
- reject a malformed userspace configuration
x86:
- suppress a warning without CONFIG_CPU_FREQ
- initialize whole irq_eoi array"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
arm/arm64: KVM: Map the BSS at HYP
arm64: KVM: Take S1 walks into account when determining S2 write faults
KVM: s390: reject invalid modes for runtime instrumentation
kvm: x86: memset whole irq_eoi
kvm/x86: Fix unused variable warning in kvm_timer_init()
KVM: MIPS: Add missing uaccess.h include
Linus Torvalds [Sat, 22 Oct 2016 02:06:59 +0000 (19:06 -0700)]
Merge tag 'nfs-for-4.9-2' of git://git.linux-nfs.org/projects/anna/linux-nfs
Pull NFS client bugfixes from Anna Schumaker:
"Just two bugfixes this time:
Stable bugfix:
- Fix last_write_offset incorrectly set to page boundary
Other bugfix:
- Fix missing-braces warning"
* tag 'nfs-for-4.9-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
nfs4: fix missing-braces warning
pnfs/blocklayout: fix last_write_offset incorrectly set to page boundary
projects / linux-beck.git / log