Alexander Graf [Mon, 2 Aug 2010 09:06:26 +0000 (11:06 +0200)]
KVM: PPC: Move EXIT_DEBUG partially to tracepoints
We have a debug printk on every exit that is usually #ifdef'ed out. Using
tracepoints makes a lot more sense here though, as they can be dynamically
enabled.
This patch converts the most commonly used debug printks of EXIT_DEBUG to
tracepoints.
MSR_K7_CLK_CTL is a no longer documented MSR, which is only relevant
on said old AMD CPU models. This change returns the expected value,
which the Linux kernel is expecting to avoid writing back the MSR,
plus it ignores all writes to the MSR.
Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
Xiao Guangrong [Sat, 28 Aug 2010 11:24:13 +0000 (19:24 +0800)]
KVM: MMU: rewrite audit_mappings_page() function
There is a bugs in this function, we call gfn_to_pfn() and kvm_mmu_gva_to_gpa_read() in
atomic context(kvm_mmu_audit() is called under the spinlock(mmu_lock)'s protection).
This patch fix it by:
- introduce gfn_to_pfn_atomic instead of gfn_to_pfn
- get the mapping gfn from kvm_mmu_page_get_gfn()
And it adds 'notrap' ptes check in unsync/direct sps
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
Xiao Guangrong [Sat, 28 Aug 2010 11:19:42 +0000 (19:19 +0800)]
KVM: MMU: fix compile warning in audit code
fix:
arch/x86/kvm/mmu.c: In function ‘kvm_mmu_unprotect_page’:
arch/x86/kvm/mmu.c:1741: warning: format ‘%lx’ expects type ‘long unsigned int’, but argument 3 has type ‘gfn_t’
arch/x86/kvm/mmu.c:1745: warning: format ‘%lx’ expects type ‘long unsigned int’, but argument 3 has type ‘gfn_t’
arch/x86/kvm/mmu.c: In function ‘mmu_unshadow’:
arch/x86/kvm/mmu.c:1761: warning: format ‘%lx’ expects type ‘long unsigned int’, but argument 3 has type ‘gfn_t’
arch/x86/kvm/mmu.c: In function ‘set_spte’:
arch/x86/kvm/mmu.c:2005: warning: format ‘%lx’ expects type ‘long unsigned int’, but argument 3 has type ‘gfn_t’
arch/x86/kvm/mmu.c: In function ‘mmu_set_spte’:
arch/x86/kvm/mmu.c:2033: warning: format ‘%lx’ expects type ‘long unsigned int’, but argument 7 has type ‘gfn_t’
Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Avi Kivity <avi@redhat.com>
Alexander Graf [Tue, 24 Aug 2010 13:48:52 +0000 (15:48 +0200)]
KVM: S390: Export kvm_virtio.h
As suggested by Christian, we should expose headers to user space with
information that might be valuable there. The s390 virtio interface is
one of those cases. It defines an ABI between hypervisor and guest, so
it should be exposed to user space.
Reported-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Alexander Graf [Tue, 24 Aug 2010 13:48:51 +0000 (15:48 +0200)]
KVM: S390: Add virtio hotplug add support
The one big missing feature in s390-virtio was hotplugging. This is no more.
This patch implements hotplug add support, so you can on the fly add new devices
in the guest.
Keep in mind that this needs a patch for qemu to actually leverage the
functionality.
Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Alexander Graf [Tue, 24 Aug 2010 13:48:50 +0000 (15:48 +0200)]
KVM: S390: take a full byte as ext_param indicator
Currenty the ext_param field only distinguishes between "config change" and
"vring interrupt". We can do a lot more with it though, so let's enable a
full byte of possible values and constants to #defines while at it.
Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Zachary Amsden [Fri, 20 Aug 2010 08:07:30 +0000 (22:07 -1000)]
KVM: x86: Fix a possible backwards warp of kvmclock
Kernel time, which advances in discrete steps may progress much slower
than TSC. As a result, when kvmclock is adjusted to a new base, the
apparent time to the guest, which runs at a much higher, nsec scaled
rate based on the current TSC, may have already been observed to have
a larger value (kernel_ns + scaled tsc) than the value to which we are
setting it (kernel_ns + 0).
We must instead compute the clock as potentially observed by the guest
for kernel_ns to make sure it does not go backwards.
Zachary Amsden [Fri, 20 Aug 2010 08:07:28 +0000 (22:07 -1000)]
KVM: x86: Add clock sync request to hardware enable
If there are active VCPUs which are marked as belonging to
a particular hardware CPU, request a clock sync for them when
enabling hardware; the TSC could be desynchronized on a newly
arriving CPU, and we need to recompute guests system time
relative to boot after a suspend event.
This covers both cases.
Note that it is acceptable to take the spinlock, as either
no other tasks will be running and no locks held (BSP after
resume), or other tasks will be guaranteed to drop the lock
relatively quickly (AP on CPU_STARTING).
Noting we now get clock synchronization requests for VCPUs
which are starting up (or restarting), it is tempting to
attempt to remove the arch/x86/kvm/x86.c CPU hot-notifiers
at this time, however it is not correct to do so; they are
required for systems with non-constant TSC as the frequency
may not be known immediately after the processor has started
until the cpufreq driver has had a chance to run and query
the chipset.
Updated: implement better locking semantics for hardware_enable
Removed the hack of dropping and retaking the lock by adding the
semantic that we always hold kvm_lock when hardware_enable is
called. The one place that doesn't need to worry about it is
resume, as resuming a frozen CPU, the spinlock won't be taken.
Zachary Amsden [Fri, 20 Aug 2010 08:07:26 +0000 (22:07 -1000)]
KVM: x86: Robust TSC compensation
Make the match of TSC find TSC writes that are close to each other
instead of perfectly identical; this allows the compensator to also
work in migration / suspend scenarios.
Zachary Amsden [Fri, 20 Aug 2010 08:07:25 +0000 (22:07 -1000)]
KVM: x86: Add helper functions for time computation
Add a helper function to compute the kernel time and convert nanoseconds
back to CPU specific cycles. Note that these must not be called in preemptible
context, as that would mean the kernel could enter software suspend state,
which would cause non-atomic operation.
Also, convert the KVM_SET_CLOCK / KVM_GET_CLOCK ioctls to use the kernel
time helper, these should be bootbased as well.
Zachary Amsden [Fri, 20 Aug 2010 08:07:24 +0000 (22:07 -1000)]
KVM: x86: Fix deep C-state TSC desynchronization
When CPUs with unstable TSCs enter deep C-state, TSC may stop
running. This causes us to require resynchronization. Since
we can't tell when this may potentially happen, we assume the
worst by forcing re-compensation for it at every point the VCPU
task is descheduled.
Zachary Amsden [Fri, 20 Aug 2010 08:07:21 +0000 (22:07 -1000)]
KVM: x86: Make cpu_tsc_khz updates use local CPU
This simplifies much of the init code; we can now simply always
call tsc_khz_changed, optionally passing it a new value, or letting
it figure out the existing value (while interrupts are disabled, and
thus, by inference from the rule, not raceful against CPU hotplug or
frequency updates, which will issue IPIs to the local CPU to perform
this very same task).
Zachary Amsden [Fri, 20 Aug 2010 08:07:20 +0000 (22:07 -1000)]
KVM: x86: TSC reset compensation
Attempt to synchronize TSCs which are reset to the same value. In the
case of a reliable hardware TSC, we can just re-use the same offset, but
on non-reliable hardware, we can get closer by adjusting the offset to
match the elapsed time.
Zachary Amsden [Fri, 20 Aug 2010 08:07:17 +0000 (22:07 -1000)]
KVM: x86: Move TSC offset writes to common code
Also, ensure that the storing of the offset and the reading of the TSC
are never preempted by taking a spinlock. While the lock is overkill
now, it is useful later in this patch series.
Zachary Amsden [Fri, 20 Aug 2010 08:07:16 +0000 (22:07 -1000)]
KVM: x86: Convert TSC writes to TSC offset writes
Change svm / vmx to be the same internally and write TSC offset
instead of bare TSC in helper functions. Isolated as a single
patch to contain code movement.
Zachary Amsden [Fri, 20 Aug 2010 08:07:15 +0000 (22:07 -1000)]
KVM: x86: Drop vm_init_tsc
This is used only by the VMX code, and is not done properly;
if the TSC is indeed backwards, it is out of sync, and will
need proper handling in the logic at each and every CPU change.
For now, drop this test during init as misguided.
Wei Yongjun [Mon, 23 Aug 2010 08:13:15 +0000 (16:13 +0800)]
KVM: MMU: fix missing percpu counter destroy
commit ad05c88266b4cce1c820928ce8a0fb7690912ba1
(KVM: create aggregate kvm_total_used_mmu_pages value)
introduce percpu counter kvm_total_used_mmu_pages but never
destroy it, this may cause oops when rmmod & modprobe.
Xiaotian Feng [Tue, 24 Aug 2010 02:31:07 +0000 (10:31 +0800)]
KVM: MMU: fix regression from rework mmu_shrink() code
Latest kvm mmu_shrink code rework makes kernel changes kvm->arch.n_used_mmu_pages/
kvm->arch.n_max_mmu_pages at kvm_mmu_free_page/kvm_mmu_alloc_page, which is called
by kvm_mmu_commit_zap_page. So the kvm->arch.n_used_mmu_pages or
kvm_mmu_available_pages(vcpu->kvm) is unchanged after kvm_mmu_prepare_zap_page(),
This caused kvm_mmu_change_mmu_pages/__kvm_mmu_free_some_pages loops forever.
Moving kvm_mmu_commit_zap_page would make the while loop performs as normal.
Reported-by: Avi Kivity <avi@redhat.com> Signed-off-by: Xiaotian Feng <dfeng@redhat.com> Tested-by: Avi Kivity <avi@redhat.com> Cc: Marcelo Tosatti <mtosatti@redhat.com> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Cc: Tim Pepper <lnxninja@linux.vnet.ibm.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
So, if you do anything stupid in your shrinker, the VM will doubly
punish you.
The mmu_shrink() function takes the global kvm_lock, then acquires
every VM's kvm->mmu_lock in sequence. If we have 100 VMs, then
we're going to take 101 locks. We do it twice, so each call takes
202 locks. If we're under memory pressure, we can have each cpu
trying to do this. It can get really hairy, and we've seen lock
spinning in mmu_shrink() be the dominant entry in profiles.
This is guaranteed to optimize at least half of those lock
aquisitions away. It removes the need to take any of the locks
when simply trying to count objects.
A 'percpu_counter' can be a large object, but we only have one
of these for the entire system. There are not any better
alternatives at the moment, especially ones that handle CPU
hotplug.
Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com> Signed-off-by: Tim Pepper <lnxninja@linux.vnet.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
Dave Hansen [Fri, 20 Aug 2010 01:11:28 +0000 (18:11 -0700)]
KVM: replace x86 kvm n_free_mmu_pages with n_used_mmu_pages
Doing this makes the code much more readable. That's
borne out by the fact that this patch removes code. "used"
also happens to be the number that we need to return back to
the slab code when our shrinker gets called. Keeping this
value as opposed to free makes the next patch simpler.
So, 'struct kvm' is kzalloc()'d. 'struct kvm_arch' is a
structure member (and not a pointer) of 'struct kvm'. That
means they start out zeroed. I _think_ they get initialized
properly by kvm_mmu_change_mmu_pages(). But, that only happens
via kvm ioctls.
Another benefit of storing 'used' intead of 'free' is
that the values are consistent from the moment the structure is
allocated: no negative "used" value.
Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com> Signed-off-by: Tim Pepper <lnxninja@linux.vnet.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
Dave Hansen [Fri, 20 Aug 2010 01:11:14 +0000 (18:11 -0700)]
KVM: rename x86 kvm->arch.n_alloc_mmu_pages
arch.n_alloc_mmu_pages is a poor choice of name. This value truly
means, "the number of pages which _may_ be allocated". But,
reading the name, "n_alloc_mmu_pages" implies "the number of allocated
mmu pages", which is dead wrong.
It's really the high watermark, so let's give it a name to match:
nr_max_mmu_pages. This change will make the next few patches
much more obvious and easy to read.
Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com> Signed-off-by: Tim Pepper <lnxninja@linux.vnet.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
Dave Hansen [Fri, 20 Aug 2010 01:11:05 +0000 (18:11 -0700)]
KVM: abstract kvm x86 mmu->n_free_mmu_pages
"free" is a poor name for this value. In this context, it means,
"the number of mmu pages which this kvm instance should be able to
allocate." But "free" implies much more that the objects are there
and ready for use. "available" is a much better description, especially
when you see how it is calculated.
In this patch, we abstract its use into a function. We'll soon
replace the function's contents by calculating the value in a
different way.
All of the reads of n_free_mmu_pages are taken care of in this
patch. The modification sites will be handled in a patch
later in the series.
Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com> Signed-off-by: Tim Pepper <lnxninja@linux.vnet.ibm.com> Signed-off-by: Avi Kivity <avi@redhat.com>
Avi Kivity [Mon, 16 Aug 2010 14:50:56 +0000 (17:50 +0300)]
KVM: x86 emulator: Use a register for ____emulate_2op() destination
Most x86 two operand instructions allow the destination to be a memory operand,
but IMUL (for example) requires that the destination be a register. Change
____emulate_2op() to take a register for both source and destination so we
can invoke IMUL.
Mohammed Gamal [Sun, 15 Aug 2010 21:47:01 +0000 (00:47 +0300)]
KVM: Separate emulation context initialization in a separate function
The code for initializing the emulation context is duplicated at two
locations (emulate_instruction() and kvm_task_switch()). Separate it
in a separate function and call it from there.
Signed-off-by: Mohammed Gamal <m.gamal005@gmail.com> Signed-off-by: Avi Kivity <avi@redhat.com>
projects / linux-beck.git / log