CHECK: braces {} should be used on all arms of this statement
CHECK: Alignment should match open parenthesis
CHECK: Prefer kzalloc(sizeof(*dev)...) over kzalloc(sizeof(struct comedi_device)...)
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The (*attach) of driver calls this function to probe the 'id' of the
hardware to verify that a valid boardinfo has been selected by the
user.
The dev_dbg() messages when the boardinfo is valid is just added
noise. The printk messages when the id does not match the boardinfo
does have some value.
Refactor the function to remove the noise and use a common message
for the "(probed, not recommended)" message.
Convert the printk() messages to dev_err().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: lustre: plain interger was used as NULL pointer
This patch fixes the following warnings found when running sparse:
.../lproc_echo.c:43:11: warning: Using plain integer as NULL pointer
.../lproc_echo.c:49:11: warning: Using plain integer as NULL pointer
Benjamin Romer [Thu, 17 Jul 2014 16:39:58 +0000 (12:39 -0400)]
staging: unisys: detect controlvm channel on module load
The controlvm channel is not removable from a guest after the guest starts,
so it makes no sense to constantly check for it. Move the channel address
discovery to visorchipset_init(), and remove all of the checks for the channel
address from the rest of the module, as the module will not load if the
channel pointer is not valid.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Benjamin Romer [Thu, 17 Jul 2014 16:39:57 +0000 (12:39 -0400)]
staging: unisys: simplify controlvm channel address function
There is no reason to have controlvm_get_channel_address() defined in a
separate file. Move it to visorchipset_main.c, remove the no-op functions
controlvm_init() and controlvm_deinit() from visorchipset_main.c, and remove
the controlvm.h and controlvm_direct.c files from the module.
Signed-off-by: Benjamin Romer <benjamin.romer@unisys.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Larry Finger [Thu, 17 Jul 2014 03:03:09 +0000 (22:03 -0500)]
staging: rtl8192ee: Fix setting highest n rate
Commit 4fb6a37c3f94c1cb4b828bfcc4347771e1628f88 by Andrey Utkin
<andrey.krieger.utkin@gmail.com> and entitled "staging: rtl8192ee:
"Correct bitmask in comparsion" fixed what appeared to be a typo. After
consultation with the Realtek engineers, merely testing for a 2T2R device
is sufficient to ensure that the TX MCS map will equal 0x0c, thus the second
test can be ignored.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There are a number of pr_{level} messages in this file that are used
to print kernel messages when the device pointer is not available for
a dev_{level} message.
Use pr_fmt() to ensure all of these messages have the module prefix.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: ni_labpc: tidy up labpc_ai_scan_mode()
This function checks the cmd->chanlist to determine the scan mode
used to sample the analog inputs. All possible modes are checked
so the final pr_err() and return 0 can never be reached.
Tidy up the function a bit and remove the unreachable code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The comedi_error() function is just a wrapper around dev_err() that adds
the dev->driver->driver_name prefix to the message and a terminating
new-line character.
All of the users of this function have been converted to use dev_err()
directly. Remove the now unused function.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: hwdrv_apci1500: remove use of comedi_error()
The comedi_error() function is just a wrapper around dev_err() that adds
the dev->driver->driver_name prefix to the message and a terminating
new-line character. The addition of the driver_name is just added noise
and some of the users of comedi_error() add unnecessary additional new-line
characters.
Use dev_err() directly instead of comedi_error() to avoid any confusion
and so that all the comedi generated kernel messages have the same format.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: hwdrv_apci1564: remove use of comedi_error()
The comedi_error() function is just a wrapper around dev_err() that adds
the dev->driver->driver_name prefix to the message and a terminating
new-line character. The addition of the driver_name is just added noise
and some of the users of comedi_error() add unnecessary additional new-line
characters.
Use dev_err() directly instead of comedi_error() to avoid any confusion
and so that all the comedi generated kernel messages have the same format.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: hwdrv_apci3120: remove use of comedi_error()
The comedi_error() function is just a wrapper around dev_err() that adds
the dev->driver->driver_name prefix to the message and a terminating
new-line character. The addition of the driver_name is just added noise
and some of the users of comedi_error() add unnecessary additional new-line
characters.
Use dev_err() directly instead of comedi_error() to avoid any confusion
and so that all the comedi generated kernel messages have the same format.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: addi_apci_3501: remove use of comedi_error()
The comedi_error() function is just a wrapper around dev_err() that adds
the dev->driver->driver_name prefix to the message and a terminating
new-line character. The addition of the driver_name is just added noise
and some of the users of comedi_error() add unnecessary additional new-line
characters.
Use dev_err() directly instead of comedi_error() to avoid any confusion
and so that all the comedi generated kernel messages have the same format.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: adl_pci9118: remove use of comedi_error()
The comedi_error() function is just a wrapper around dev_err() that adds
the dev->driver->driver_name prefix to the message and a terminating
new-line character. The addition of the driver_name is just added noise
and some of the users of comedi_error() add unnecessary additional new-line
characters.
Use dev_err() directly instead of comedi_error() to avoid any confusion
and so that all the comedi generated kernel messages have the same format.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: adv_pci1724: remove use of comedi_error()
The comedi_error() function is just a wrapper around dev_err() that adds
the dev->driver->driver_name prefix to the message and a terminating
new-line character. The addition of the driver_name is just added noise
and some of the users of comedi_error() add unnecessary additional new-line
characters.
Use dev_err() directly instead of comedi_error() to avoid any confusion
and so that all the comedi generated kernel messages have the same format.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: adv_pci_dio: remove use of comedi_error()
The comedi_error() function is just a wrapper around dev_err() that adds
the dev->driver->driver_name prefix to the message and a terminating
new-line character. The addition of the driver_name is just added noise
and some of the users of comedi_error() add unnecessary additional new-line
characters.
Use dev_err() directly instead of comedi_error() to avoid any confusion
and so that all the comedi generated kernel messages have the same format.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: amplc_dio_common: remove use of comedi_error()
The comedi_error() function is just a wrapper around dev_err() that adds
the dev->driver->driver_name prefix to the message and a terminating
new-line character. The addition of the driver_name is just added noise
and some of the users of comedi_error() add unnecessary additional new-line
characters.
Use dev_err() directly instead of comedi_error() to avoid any confusion
and so that all the comedi generated kernel messages have the same format.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: amplc_pci230: remove use of comedi_error()
The comedi_error() function is just a wrapper around dev_err() that adds
the dev->driver->driver_name prefix to the message and a terminating
new-line character. The addition of the driver_name is just added noise
and some of the users of comedi_error() add unnecessary additional new-line
characters.
Use dev_err() directly instead of comedi_error() to avoid any confusion
and so that all the comedi generated kernel messages have the same format.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: cb_pcidas: remove use of comedi_error()
The comedi_error() function is just a wrapper around dev_err() that adds
the dev->driver->driver_name prefix to the message and a terminating
new-line character. The addition of the driver_name is just added noise
and some of the users of comedi_error() add unnecessary additional new-line
characters.
Use dev_err() directly instead of comedi_error() to avoid any confusion
and so that all the comedi generated kernel messages have the same format.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: comedi_test: remove use of comedi_error()
The comedi_error() function is just a wrapper around dev_err() that adds
the dev->driver->driver_name prefix to the message and a terminating
new-line character. The addition of the driver_name is just added noise
and some of the users of comedi_error() add unnecessary additional new-line
characters.
Use dev_err() directly instead of comedi_error() to avoid any confusion
and so that all the comedi generated kernel messages have the same format.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: das08: remove use of comedi_error()
The comedi_error() function is just a wrapper around dev_err() that adds
the dev->driver->driver_name prefix to the message and a terminating
new-line character. The addition of the driver_name is just added noise
and some of the users of comedi_error() add unnecessary additional new-line
characters.
Use dev_err() directly instead of comedi_error() to avoid any confusion
and so that all the comedi generated kernel messages have the same format.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: das16m1: remove use of comedi_error()
The comedi_error() function is just a wrapper around dev_err() that adds
the dev->driver->driver_name prefix to the message and a terminating
new-line character. The addition of the driver_name is just added noise
and some of the users of comedi_error() add unnecessary additional new-line
characters.
Use dev_err() directly instead of comedi_error() to avoid any confusion
and so that all the comedi generated kernel messages have the same format.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: das1800: remove use of comedi_error()
The comedi_error() function is just a wrapper around dev_err() that adds
the dev->driver->driver_name prefix to the message and a terminating
new-line character. The addition of the driver_name is just added noise
and some of the users of comedi_error() add unnecessary additional new-line
characters.
Use dev_err() directly instead of comedi_error() to avoid any confusion
and so that all the comedi generated kernel messages have the same format.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: dmm32at: remove use of comedi_error()
The comedi_error() function is just a wrapper around dev_err() that adds
the dev->driver->driver_name prefix to the message and a terminating
new-line character. The addition of the driver_name is just added noise
and some of the users of comedi_error() add unnecessary additional new-line
characters.
Use dev_err() directly instead of comedi_error() to avoid any confusion
and so that all the comedi generated kernel messages have the same format.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: dt2814: remove use of comedi_error()
The comedi_error() function is just a wrapper around dev_err() that adds
the dev->driver->driver_name prefix to the message and a terminating
new-line character. The addition of the driver_name is just added noise
and some of the users of comedi_error() add unnecessary additional new-line
characters.
Use dev_err() directly instead of comedi_error() to avoid any confusion
and so that all the comedi generated kernel messages have the same format.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: dt282x: remove use of comedi_error()
The comedi_error() function is just a wrapper around dev_err() that adds
the dev->driver->driver_name prefix to the message and a terminating
new-line character. The addition of the driver_name is just added noise
and some of the users of comedi_error() add unnecessary additional new-line
characters.
Use dev_err() directly instead of comedi_error() to avoid any confusion
and so that all the comedi generated kernel messages have the same format.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: icp_multi: remove use of comedi_error()
The comedi_error() function is just a wrapper around dev_err() that adds
the dev->driver->driver_name prefix to the message and a terminating
new-line character. The addition of the driver_name is just added noise
and some of the users of comedi_error() add unnecessary additional new-line
characters.
Use dev_err() directly instead of comedi_error() to avoid any confusion
and so that all the comedi generated kernel messages have the same format.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: cb_pcidas64: remove use of comedi_error()
The comedi_error() function is just a wrapper around dev_err() that adds
the dev->driver->driver_name prefix to the message and a terminating
new-line character. The addition of the driver_name is just added noise
and some of the users of comedi_error() add unnecessary additional new-line
characters.
Use dev_err() directly instead of comedi_error() to avoid any confusion
and so that all the comedi generated kernel messages have the same format.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: ni_660x: remove use of comedi_error()
The comedi_error() function is just a wrapper around dev_err() that adds
the dev->driver->driver_name prefix to the message and a terminating
new-line character. The addition of the driver_name is just added noise
and some of the users of comedi_error() add unnecessary additional new-line
characters.
Use dev_err() directly instead of comedi_error() to avoid any confusion
and so that all the comedi generated kernel messages have the same format.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: ni_at_a2150: remove use of comedi_error()
The comedi_error() function is just a wrapper around dev_err() that adds
the dev->driver->driver_name prefix to the message and a terminating
new-line character. The addition of the driver_name is just added noise
and some of the users of comedi_error() add unnecessary additional new-line
characters.
Use dev_err() directly instead of comedi_error() to avoid any confusion
and so that all the comedi generated kernel messages have the same format.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: ni_labpc: remove use of comedi_error()
The comedi_error() function is just a wrapper around dev_err() that adds
the dev->driver->driver_name prefix to the message and a terminating
new-line character. The addition of the driver_name is just added noise
and some of the users of comedi_error() add unnecessary additional new-line
characters.
Use dev_err() directly instead of comedi_error() to avoid any confusion
and so that all the comedi generated kernel messages have the same format.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: ni_mio_common: remove use of comedi_error()
The comedi_error() function is just a wrapper around dev_err() that adds
the dev->driver->driver_name prefix to the message and a terminating
new-line character. The addition of the driver_name is just added noise
and some of the users of comedi_error() add unnecessary additional new-line
characters.
Use dev_err() directly instead of comedi_error() to avoid any confusion
and so that all the comedi generated kernel messages have the same format.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
staging: comedi: ni_pcidio: remove use of comedi_error()
The comedi_error() function is just a wrapper around dev_err() that adds
the dev->driver->driver_name prefix to the message and a terminating
new-line character. The addition of the driver_name is just added noise
and some of the users of comedi_error() add unnecessary additional new-line
characters.
Use dev_err() directly instead of comedi_error() to avoid any confusion
and so that all the comedi generated kernel messages have the same format.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com> Cc: Ian Abbott <abbotti@mev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
projects / linux-beck.git / log