Move the calls to memcpy_fromio() up into the loop in dmi_scan_machine(),
and move the signature checks back down into dmi_decode(). We need to
check at 16-byte intervals but keep a 32-byte buffer for an SMBIOS entry,
so shift the buffer after each iteration.
Merge smbios_present() into dmi_present(), so we look for an SMBIOS
signature at the beginning of the given buffer and then for a DMI
signature at an offset of 16 bytes.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Reported-by: Tim McGrath <tmhikaru@gmail.com> Tested-by: Tim Mcgrath <tmhikaru@gmail.com> Cc: Zhenzhong Duan <zhenzhong.duan@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
If the kernel was booted with the "quiet" boot option we have currently no
chance to see why an initrd fails. Change KERN_WARNING to KERN_ERR to see
what is going on.
Signed-off-by: Richard Weinberger <richard@nod.at> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Rusty Russell <rusty@rustcorp.com.au> Cc: Jim Cromie <jim.cromie@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Steven Rostedt [Tue, 26 Mar 2013 23:25:09 +0000 (10:25 +1100)]
init: scream bloody murder if interrupts are enabled too early
As I was testing a lot of my code recently, and having several
"successes", I accidentally noticed in the dmesg this little line:
[ 0.000000] start_kernel(): bug: interrupts were enabled *very* early, fixing it
Sure enough, one of my patches two commits ago enabled interrupts early.
The sad part here is that I never noticed it, and I ran several tests with
ktest too, and ktest did not notice this line.
What ktest looks for (and so does many other automated testing scripts) is
a back trace produced by a WARN_ON() or BUG(). As a back trace was never
produced, my buggy patch could have slipped into linux-next, or even
worse, mainline.
Adding a WARN(!irqs_disabled()) makes this bug a little more obvious:
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 2003252k/2054848k available (4857k kernel code, 460k absent, 51136k reserved, 6210k data, 1096k init)
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: at /home/rostedt/work/git/linux-trace.git/init/main.c:543 start_kernel+0x21e/0x415()
[ 0.000000] Hardware name: To Be Filled By O.E.M.
[ 0.000000] Interrupts were enabled *very* early, fixing it
[ 0.000000] Modules linked in:
[ 0.000000] Pid: 0, comm: swapper/0 Not tainted 3.8.0-test+ #286
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffff81037b79>] warn_slowpath_common+0x83/0x9b
[ 0.000000] [<ffffffff81037c34>] warn_slowpath_fmt+0x46/0x48
[ 0.000000] [<ffffffff81ae4a39>] start_kernel+0x21e/0x415
[ 0.000000] [<ffffffff81ae4623>] ? repair_env_string+0x56/0x56
[ 0.000000] [<ffffffff81ae4312>] x86_64_start_reservations+0x10e/0x112
[ 0.000000] [<ffffffff81ae4120>] ? early_idt_handlers+0x120/0x120
[ 0.000000] [<ffffffff81ae4418>] x86_64_start_kernel+0x102/0x111
[ 0.000000] ---[ end trace 007d8b0491b4f5d8 ]---
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [ttyS0] enabled, bootconsole disabled
Do you see it?
The original version of this patch just slapped a WARN_ON() in there and
kept the printk(). Ard van Breemen suggested using the WARN() interface,
which makes the code a bit cleaner.
Also, while examining other warnings in init/main.c, I found two other
locations that deserve a bloody murder scream if their conditions are hit,
and updated them accordingly.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org> Cc: Ard van Breemen <ard@telegraafnet.nl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
We observed this problem has been occurring since 2.6.30 with
fs/binfmt_elf.c: create_elf_tables()->get_random_bytes(), introduced by f06295b44c296c8f ("ELF: implement AT_RANDOM for glibc PRNG seeding").
/*
* Generate 16 random bytes for userspace PRNG seeding.
*/
get_random_bytes(k_rand_bytes, sizeof(k_rand_bytes));
The patch introduces a wrapper around get_random_int() which has lower
overhead than calling get_random_bytes() directly.
With this patch applied:
$ cat /proc/sys/kernel/random/entropy_avail
2731
$ cat /proc/sys/kernel/random/entropy_avail
2802
$ cat /proc/sys/kernel/random/entropy_avail
2878
Analyzed by John Sobecki.
Signed-off-by: Jie Liu <jeff.liu@oracle.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Andreas Dilger <aedilger@gmail.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Arnd Bergmann <arnn@arndb.de> Cc: John Sobecki <john.sobecki@oracle.com> Cc: James Morris <james.l.morris@oracle.com> Cc: Jakub Jelinek <jakub@redhat.com> Cc: Ted Ts'o <tytso@mit.edu> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Kees Cook <keescook@chromium.org> Cc: Ulrich Drepper <drepper@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Josh Triplett [Tue, 26 Mar 2013 23:25:08 +0000 (10:25 +1100)]
fs: make binfmt support for #! scripts modular and removable
Add a new configuration option CONFIG_BINFMT_SCRIPT to configure support
for interpreted scripts starting with "#!"; allow compiling out that
support, or building it as a module. Embedded systems running exclusively
compiled binaries could leave this support out, and systems that don't
need scripts before mounting the root filesystem can build this as a
module.
Signed-off-by: Josh Triplett <josh@joshtriplett.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Eric Wong [Tue, 26 Mar 2013 23:25:08 +0000 (10:25 +1100)]
epoll: cleanup: hoist out f_op->poll calls
This reduces the amount of code inside the ready list iteration loops for
better readability IMHO.
Signed-off-by: Eric Wong <normalperson@yhbt.net> Cc: Davide Libenzi <davidel@xmailserver.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Eric Wong [Tue, 26 Mar 2013 23:25:08 +0000 (10:25 +1100)]
epoll: lock ep->mtx in ep_free to silence lockdep
Technically we do not need to hold ep->mtx during ep_free since we are
certain there are no other users of ep at that point. However, lockdep
complains with a "suspicious rcu_dereference_check() usage!" message; so
lock the mutex before ep_remove to silence the warning.
Signed-off-by: Eric Wong <normalperson@yhbt.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Arve Hjønnevåg <arve@android.com> Cc: Davide Libenzi <davidel@xmailserver.org> Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: NeilBrown <neilb@suse.de>, Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Eric Wong [Tue, 26 Mar 2013 23:25:08 +0000 (10:25 +1100)]
epoll: fix suspicious RCU usage in ep_poll_callback
The commit "epoll: use RCU to protect wakeup_source in epitem"
introduced the ep_pm_stay_awake_rcu function for ep_poll_callback
use, but I left it unused on accident. ep->mtx cannot be held in
ep_poll_callback, so RCU should be used here.
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Paton J. Lewis [Tue, 26 Mar 2013 23:25:07 +0000 (10:25 +1100)]
epoll: support for disabling items, and a self-test app
It is not currently possible to reliably delete epoll items when using the
same epoll set from multiple threads. After calling epoll_ctl with
EPOLL_CTL_DEL, another thread might still be executing code related to an
event for that epoll item (in response to epoll_wait). Therefore the
deleting thread does not know when it is safe to delete resources
pertaining to the associated epoll item because another thread might be
using those resources.
The deleting thread could wait an arbitrary amount of time after calling
epoll_ctl with EPOLL_CTL_DEL and before deleting the item, but this is
inefficient and could result in the destruction of resources before
another thread is done handling an event returned by epoll_wait.
This patch enhances epoll_ctl to support EPOLL_CTL_DISABLE, which disables
an epoll item. If epoll_ctl returns -EBUSY in this case, then another
thread may handling a return from epoll_wait for this item. Otherwise if
epoll_ctl returns 0, then it is safe to delete the epoll item. This
allows multiple threads to use a mutex to determine when it is safe to
delete an epoll item and its associated resources, which allows epoll
items to be deleted both efficiently and without error in a multi-threaded
environment. Note that EPOLL_CTL_DISABLE is only useful in conjunction
with EPOLLONESHOT, and using EPOLL_CTL_DISABLE on an epoll item without
EPOLLONESHOT returns -EINVAL.
This patch also adds a new test_epoll self-test program to both
demonstrate the need for this feature and test it.
Signed-off-by: Paton J. Lewis <palewis@adobe.com> Cc: Alexander Viro <viro@zeniv.linux.org.uk> Cc: Jason Baron <jbaron@redhat.com> Cc: Paul Holland <pholland@adobe.com> Cc: Davide Libenzi <davidel@xmailserver.org> Cc: Michael Kerrisk <mtk.manpages@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Eric Wong [Tue, 26 Mar 2013 23:25:06 +0000 (10:25 +1100)]
epoll: comment + BUILD_BUG_ON to prevent epitem bloat
This will prevent us from accidentally introducing a memory bloat
regression here in the future.
Signed-off-by: Eric Wong <normalperson@yhbt.net> Cc: Davide Libenzi <davidel@xmailserver.org>, Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Andrew Morton [Tue, 26 Mar 2013 23:25:06 +0000 (10:25 +1100)]
epoll-trim-epitem-by-one-cache-line-on-x86_64-fix
use __packed, for all architectures
Cc: Al Viro <viro@ZenIV.linux.org.uk> Cc: Davide Libenzi <davidel@xmailserver.org> Cc: Eric Wong <normalperson@yhbt.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Eric Wong [Tue, 26 Mar 2013 23:25:06 +0000 (10:25 +1100)]
epoll: trim epitem by one cache line
It is common for epoll users to have thousands of epitems, so saving a
cache line on every allocation leads to large memory savings.
Since epitem allocations are cache-aligned, reducing sizeof(struct epitem)
from 136 bytes to 128 bytes will allow it to squeeze under a cache line
boundary on x86_64.
Via /sys/kernel/slab/eventpoll_epi, I see the following changes on my
x86_64 Core2 Duo (which has 64-byte cache alignment):
object_size : 192 => 128
objs_per_slab: 21 => 32
Also, add a BUILD_BUG_ON() to check for future accidental breakage.
Signed-off-by: Eric Wong <normalperson@yhbt.net> Cc: Davide Libenzi <davidel@xmailserver.org> Cc: Al Viro <viro@ZenIV.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Joe Perches [Tue, 26 Mar 2013 23:25:05 +0000 (10:25 +1100)]
checkpatch: add check for reuse of krealloc arg
On Thu, 2013-03-14 at 13:30 +0000, David Woodhouse wrote:
> If krealloc() returns NULL, it *doesn't* free the original. So any code
> of the form 'foo = krealloc(foo, …);' is almost certainly a bug.
So add a check for it to checkpatch.
Signed-off-by: Joe Perches <joe@perches.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Guenter Roeck <linux@roeck-us.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Andy Whitcroft <apw@canonical.com> Cc: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Oleg Nesterov [Tue, 26 Mar 2013 23:25:04 +0000 (10:25 +1100)]
argv_split(): teach it to handle mutable strings
argv_split() allocates argv[count_argc(str)] array and assumes that it
will find the same number of arguments later. This is obviously wrong if
this string can be changed, say, by sysctl.
With this patch argv_split() kstrndup's the whole string and does not
split it, we simply replace the spaces with zeroes and keep the allocated
memory in argv[-1] for argv_free(arg).
We do not use argv[0] because:
- str can be all-spaces or empty. In fact this case is fine,
we could kfree() it before return, but:
- str can have a space at the start, and we can not rely on
kstrndup(skip_spaces(str)) because it can equally race if
this string is mutable.
Also, simplify count_argc() and kill the no longer used skip_arg().
drivers/leds/leds-ot200.c: fix error caused by shifted mask
During the development of this driver an in-house register documentation
was used. The last week some integration tests were done and this problem
was found. It turned out that the released register documentation is
wrong.
The fix is very simple: shift all masks by one.
Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com> Cc: Bryan Wu <cooloney@gmail.com> Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
drivers/video/backlight/as3711_bl.c: add OF support
Add support for configuring AS3711 backlight driver from DT.
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Reviewed-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Cc: Magnus Damm <magnus.damm@gmail.com> Cc: Simon Horman <horms@verge.net.au> Cc: Samuel Ortiz <sameo@linux.intel.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stefano Babic [Tue, 26 Mar 2013 23:25:02 +0000 (10:25 +1100)]
video: backlight: add ili922x lcd driver
Add LCD driver for Ilitek ILI9221/ILI9222 controller. The driver uses SPI
interface for controller access and configuration and RGB interface for
graphics data transfer.
Signed-off-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Devendra Naga [Tue, 26 Mar 2013 23:25:01 +0000 (10:25 +1100)]
drivers/video/backlight/adp5520_bl.c: fix compiler warning in adp5520_show()
While compiling with make W=1 (gcc gcc (GCC) 4.7.2 20121109 (Red Hat
4.7.2-8)) found the following warning
drivers/video/backlight/adp5520_bl.c: In function `adp5520_show':
drivers/video/backlight/adp5520_bl.c:146:6: warning: variable `error' set but not used [-Wunused-but-set-variable]
fixed by checking the return value of the variable
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com> Acked-by: Jingoo Han <jg1.han@samsung.com> Cc: Michael Hennerich <michael.hennerich@analog.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Paul Bolle [Tue, 26 Mar 2013 23:25:01 +0000 (10:25 +1100)]
drivers/video/backlight/Kconfig: fix typo "MACH_SAM9...EK" three times
Fix three typos (originally) introduced by a9a84c37d ("atmel_lcdfb:
backlight control").
Two of these typos were introduced in v2.6.25. (The third was introduced
in 915190f7d4f08 ("[ARM] 5614/1: at91: atmel_lcdfb: add at91sam9g10
support to atmel LCD driver")). Checking these commits reveals that the
default value of 'y' has never been set automatically in all releases
since v2.6.25! Perhaps this line might as well be dropped.
Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Acked-by: Jingoo Han <jg1.han@samsung.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Jingoo Han [Tue, 26 Mar 2013 23:24:57 +0000 (10:24 +1100)]
drivers/video/backlight/l4f00242t03.c: check return value of regulator_enable()
regulator_enable() is marked as as __must_check. Therefore the return
value of regulator_enable() should be checked. Also, this patch checks
return value of regulator_set_voltage().
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add missing braces to include error message. The error message is related
to the return value for sysfs_create_group(). However,
sysfs_create_group() is called when pdata->en_ambl_sens is not zero.
Thus, the checking return value should be included in the if statement.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Devendra Naga [Tue, 26 Mar 2013 23:24:55 +0000 (10:24 +1100)]
drivers/video/backlight/lp855x_bl.c: fix compiler warning in lp855x_probe
while doing with make W=1 gcc (gcc (GCC) 4.7.2 20121109 (Red Hat 4.7.2-8))
found
drivers/video/backlight/lp855x_bl.c: In function `lp855x_probe':
drivers/video/backlight/lp855x_bl.c:342:35: warning: variable `mode' set but not used [-Wunused-but-set-variable]
fixed by removing it as since its not used anywhere
Signed-off-by: Devendra Naga <devendra.aaru@gmail.com> Acked-by: Milo Kim <milo.kim@ti.com> Cc: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When the macro such as SIMPLE_DEV_PM_OPS is used, there is no need to use
'#ifdef CONFIG_PM' to prevent build error. Thus, this patch removes
unnecessary ifdefs.
Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Joe Perches <joe@perches.com> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Stephen Warren <swarren@nvidia.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Stephen Warren [Tue, 26 Mar 2013 23:24:53 +0000 (10:24 +1100)]
get_maintainer: use filename-only regex match for Tegra
Create a new N: entry type in MAINTAINERS which performs a regex match
against filenames; either those extracted from patch +++ or --- lines, or
those specified on the command-line using the -f option.
This provides the same benefits as using a K: regex option to match a set
of filenames (see commit eb90d08 "get_maintainer: allow keywords to match
filenames"), but without the disadvantage that "random" file content, such
as comments, will ever match the regex. Hence, revert most of that
commit.
Switch the Tegra entry from using K: to N:
Reported-by: Marcin Slusarz <marcin.slusarz@gmail.com> Suggested-by: Joe Perches <joe@perches.com> Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Joe Perches <joe@perches.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Andrew Morton [Tue, 26 Mar 2013 23:24:52 +0000 (10:24 +1100)]
include/linux/printk.h: include stdarg.h
printk.h uses va_list but doesn't include stdarg.h. Hence printk.h is
unusable unless its includer has already included kernel.h (which includes
stdarg.h).
Remove the dependency by including stdarg.h in printk.h
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Thomas Gleixner [Tue, 26 Mar 2013 23:24:52 +0000 (10:24 +1100)]
early_printk: consolidate random copies of identical code
The early console implementations are the same all over the place. Move
the print function to kernel/printk and get rid of the copies.
[v3: drop sparc bits as suggested by tglx, redo build tests on sparc
sparc32, Randy's randconfig, ppc, mips, arm...]
[v2: essentially unchanged since v1, so I've left the acked/reviewed
tags. There was a compile fail[1] for a randconfig with EARLY_PRINTK=y
and PRINTK=n, because the early_console struct and early_printk calls
were nested within an #ifdef CONFIG_PRINTK -- moving that whole block
exactly as-is to be outside the #ifdef CONFIG_PRINTK fixes the randconfig
and still works for everyday sane configs too.]
[1] http://marc.info/?l=linux-next&m=136219350914998&w=2
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Russell King <linux@arm.linux.org.uk> Acked-by: Mike Frysinger <vapier@gentoo.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Richard Weinberger <richard@nod.at> Reviewed-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Thomas Gleixner [Tue, 26 Mar 2013 23:24:52 +0000 (10:24 +1100)]
early_printk: consolidate random copies of identical code
The early console implementations are the same all over the place. Move
the print function to kernel/printk and get rid of the copies.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: Russell King <linux@arm.linux.org.uk> Acked-by: Mike Frysinger <vapier@gentoo.org> Cc: Michal Simek <monstr@monstr.eu> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Richard Weinberger <richard@nod.at> Reviewed-by: Ingo Molnar <mingo@kernel.org> Tested-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
zhangwei(Jovi) [Tue, 26 Mar 2013 23:24:51 +0000 (10:24 +1100)]
printk/tracing: rework console tracing
commit 7ff9554bb ("printk: convert byte-buffer to variable-length record
buffer") removed start and end parameters in call_console_drivers, but
those parameters still exists in include/trace/events/printk.h.
Without start and end parameters handling, printk tracing became more
simple as: trace_console(text, len);
Signed-off-by: zhangwei(Jovi) <jovi.zhangwei@huawei.com> Acked-by: Steven Rostedt <rostedt@goodmis.org> Acked-by: Frederic Weisbecker <fweisbec@gmail.com> Cc: Kay Sievers <kay@vrfy.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Fan Du [Tue, 26 Mar 2013 23:24:51 +0000 (10:24 +1100)]
include/linux/fs.h: disable preempt when acquire i_size_seqcount write lock
Two rt tasks bind to one CPU core.
The higher priority rt task A preempts a lower priority rt task B which
has already taken the write seq lock, and then the higher priority rt task
A try to acquire read seq lock, it's doomed to lockup.
rt task A with lower priority: call write
i_size_write rt task B with higher priority: call sync, and preempt task A
write_seqcount_begin(&inode->i_size_seqcount); i_size_read
inode->i_size = i_size; read_seqcount_begin <-- lockup here...
So disable preempt when acquiring every i_size_seqcount *write* lock will
cure the problem.
Signed-off-by: Fan Du <fan.du@windriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Chuansheng Liu [Tue, 26 Mar 2013 23:24:50 +0000 (10:24 +1100)]
smp: Give WARN()ing when calling smp_call_function_many()/single() in serving irq
Currently the functions smp_call_function_many()/single() will give a
WARN()ing only in the case of irqs_disabled(), but that check is not
enough to guarantee execution of the SMP cross-calls.
In many other cases such as softirq handling/interrupt handling, the two
APIs still can not be called, just as the smp_call_function_many()
comments say:
* You must not call this function with disabled interrupts or from a
* hardware interrupt handler or from a bottom half handler. Preemption
* must be disabled when calling this function.
There is a real case for softirq DEADLOCK case:
CPUA CPUB
spin_lock(&spinlock)
Any irq coming, call the irq handler
irq_exit()
spin_lock_irq(&spinlock)
<== Blocking here due to
CPUB hold it
__do_softirq()
run_timer_softirq()
timer_cb()
call smp_call_function_many()
send IPI interrupt to CPUA
wait_csd()
Then both CPUA and CPUB will be deadlocked here.
So we should give a warning in the nmi, hardirq or softirq context as well.
Moreover, adding one new macro in_serving_irq() which indicates we are
processing nmi, hardirq or sofirq.
Signed-off-by: liu chuansheng <chuansheng.liu@intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Tested-by: Fengguang Wu <fengguang.wu@intel.com> Cc: Lai Jiangshan <eag0628@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
anish kumar [Tue, 26 Mar 2013 23:24:50 +0000 (10:24 +1100)]
kernel/watchdog.c: add comments to explain watchdog_disabled variable
This watchdog_disabled flag is a bit cryptic. However it's usefulness is
multifold. Uses are:
1. Check if smpboot_register_percpu_thread function passed.
2. Makes sure that user enables and disables the watchdog in sequence
i.e. enable watchdog->disable watchdog->enable watchdog
Unlike enable watchdog->enable watchdog which is wrong.
[dzickus@redhat.com: small text cleanups] Signed-off-by: anish kumar <anish198519851985@gmail.com> Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Glauber Costa [Tue, 26 Mar 2013 23:24:48 +0000 (10:24 +1100)]
memcg: debugging facility to access dangling memcgs
If memcg is tracking anything other than plain user memory (swap, tcp buf
mem, or slab memory), it is possible - and normal - that a reference will
be held by the group after it is dead. Still, for developers, it would be
extremely useful to be able to query about those states during debugging.
This patch provides a debugging facility in the root memcg, so we can
inspect which memcgs still have pending objects, and what is the cause of
this state.
Signed-off-by: Glauber Costa <glommer@parallels.com> Acked-by: Michal Hocko <mhocko@suse.cz> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Xi Wang [Tue, 26 Mar 2013 23:24:48 +0000 (10:24 +1100)]
mm/dmapool.c: fix null dev in dma_pool_create()
A few drivers invoke dma_pool_create() with a null dev. Note that dev is
dereferenced in dev_to_node(dev), causing a null pointer dereference.
A long term solution is to disallow null dev. Once the drivers are fixed,
we can simplify the core code here. For now we add WARN_ON(!dev) to
notify the driver maintainers and avoid the null pointer dereference.
Signed-off-by: Xi Wang <xi.wang@gmail.com> Cc: David Rientjes <rientjes@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Xi Wang [Tue, 26 Mar 2013 23:24:48 +0000 (10:24 +1100)]
drivers/usb/gadget/amd5536udc.c: avoid calling dma_pool_create() with NULL dev
Calling dma_pool_create() with dev==NULL will oops on a NUMA machine.
Rather than changing dma_pool_create() we wish to disallow passing
dev==NULL. This requires fixing up the small number of drivers which are
passing in dev==NULL.
Use &dev->pdev->dev instead of NULL.
Signed-off-by: Xi Wang <xi.wang@gmail.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Michal Hocko [Tue, 26 Mar 2013 23:24:48 +0000 (10:24 +1100)]
drop_caches: add some documentation and info message
I would like to resurrect Dave's patch. The last time it was posted was
here https://lkml.org/lkml/2010/9/16/250 and there didn't seem to be any
strong opposition.
Kosaki was worried about possible excessive logging when somebody drops
caches too often (but then he claimed he didn't have a strong opinion on
that) but I would say opposite. If somebody does that then I would really
like to know that from the log when supporting a system because it almost
for sure means that there is something fishy going on. It is also worth
mentioning that only root can write drop caches so this is not an flooding
attack vector.
I am bringing that up again because this can be really helpful when
chasing strange performance issues which (surprise surprise) turn out to
be related to artificially dropped caches done because the admin thinks
this would help...
I have just refreshed the original patch on top of the current mm tree
but I could live with KERN_INFO as well if people think that KERN_NOTICE
is too hysterical.
: From: Dave Hansen <dave@linux.vnet.ibm.com>
: Date: Fri, 12 Oct 2012 14:30:54 +0200
:
: There is plenty of anecdotal evidence and a load of blog posts
: suggesting that using "drop_caches" periodically keeps your system
: running in "tip top shape". Perhaps adding some kernel
: documentation will increase the amount of accurate data on its use.
:
: If we are not shrinking caches effectively, then we have real bugs.
: Using drop_caches will simply mask the bugs and make them harder
: to find, but certainly does not fix them, nor is it an appropriate
: "workaround" to limit the size of the caches.
:
: It's a great debugging tool, and is really handy for doing things
: like repeatable benchmark runs. So, add a bit more documentation
: about it, and add a little KERN_NOTICE. It should help developers
: who are chasing down reclaim-related bugs.
[mhocko@suse.cz: refreshed to current -mm tree]
[akpm@linux-foundation.org: checkpatch fixes] Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com> Reviewed-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Michal Hocko <mhocko@suse.cz> Acked-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Acked-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Mike Yoknis [Tue, 26 Mar 2013 23:24:47 +0000 (10:24 +1100)]
mm: memmap_init_zone() performance improvement
We have what we call an "architectural simulator". It is a computer
program that pretends that it is a computer system. We use it to test the
firmware before real hardware is available. We have booted Linux on our
simulator. As you would expect it takes longer to boot on the simulator
than it does on real hardware.
With my patch - boot time 41 minutes
Without patch - boot time 94 minutes
These numbers do not scale linearly to real hardware. But indicate to me
a place where Linux can be improved.
memmap_init_zone() loops through every Page Frame Number (pfn), including
pfn values that are within the gaps between existing memory sections. The
unneeded looping will become a boot performance issue when machines
configure larger memory ranges that will contain larger and more numerous
gaps.
The code will skip across invalid pfn values to reduce the number of loops
executed.
Signed-off-by: Mike Yoknis <mike.yoknis@hp.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cody P Schafer [Tue, 26 Mar 2013 23:24:46 +0000 (10:24 +1100)]
page_alloc: make setup_nr_node_ids() usable for arch init code
powerpc and x86 were opencoding copies of setup_nr_node_ids(), which
page_alloc provides but makes static. Make it avaliable to the archs in
linux/mm.h.
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Russ Anderson [Tue, 26 Mar 2013 23:24:45 +0000 (10:24 +1100)]
mm: speedup in __early_pfn_to_nid
When booting on a large memory system, the kernel spends considerable time
in memmap_init_zone() setting up memory zones. Analysis shows significant
time spent in __early_pfn_to_nid().
The routine memmap_init_zone() checks each PFN to verify the nid is valid.
__early_pfn_to_nid() sequentially scans the list of pfn ranges to find
the right range and returns the nid. This does not scale well. On a 4 TB
(single rack) system there are 308 memory ranges to scan. The higher the
PFN the more time spent sequentially spinning through memory ranges.
Since memmap_init_zone() increments pfn, it will almost always be looking
for the same range as the previous pfn, so check that range first. If it
is in the same range, return that nid. If not, scan the list as before.
A 4 TB (single rack) UV1 system takes 512 seconds to get through the zone
code. This performance optimization reduces the time by 189 seconds, a
36% improvement.
A 2 TB (single rack) UV2 system goes from 212.7 seconds to 99.8 seconds, a
112.9 second (53%) reduction.
[akpm@linux-foundation.org: make the statics __meminitdata]
[akpm@linux-foundation.org: fix comment formatting]
[akpm@linux-foundation.org: fix ia64, per yinghai] Signed-off-by: Russ Anderson <rja@sgi.com> Cc: David Rientjes <rientjes@google.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Tested-by: "Luck, Tony" <tony.luck@intel.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Lin Feng <linfeng@cn.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Mel Gorman [Tue, 26 Mar 2013 23:24:44 +0000 (10:24 +1100)]
mm: page_alloc: avoid marking zones full prematurely after zone_reclaim()
The following problem was reported against a distribution kernel when
zone_reclaim was enabled but the same problem applies to the mainline
kernel. The reproduction case was as follows
1. Run numactl -m +0 dd if=largefile of=/dev/null
This allocates a large number of clean pages in node 0
2. numactl -N +0 memhog 0.5*Mg
This start a memory-using application in node 0.
The expected behaviour is that the clean pages get reclaimed and the
application uses node 0 for its memory. The observed behaviour was that
the memory for the memhog application was allocated off-node since commits cd38b11 ("mm: page allocator: initialise ZLC for first zone eligible for
zone_reclaim") and commit 76d3fbf ("mm: page allocator: reconsider zones
for allocation after direct reclaim").
The assumption of those patches was that it was always preferable to
allocate quickly than stall for long periods of time and they were meant
to take care that the zone was only marked full when necessary but an
important case was missed.
In the allocator fast path, only the low watermarks are checked. If the
zones free pages are between the low and min watermark then allocations
from the allocators slow path will succeed. However, zone_reclaim will
only reclaim SWAP_CLUSTER_MAX or 1<<order pages. There is no guarantee
that this will meet the low watermark causing the zone to be marked full
prematurely.
This patch will only mark the zone full after zone_reclaim if it the min
watermarks are checked or if page reclaim failed to make sufficient
progress.
Signed-off-by: Mel Gorman <mgorman@suse.de> Reported-by: Hedi Berriche <hedi@sgi.com> Tested-by: Hedi Berriche <hedi@sgi.com> Reviewed-by: Michal Hocko <mhocko@suse.cz> Reviewed-by: Wanpeng Li <liwanp@linux.vnet.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
projects / karo-tx-linux.git / log